®
Operation
and Installation
Manual
MHz
RV5080 AM/ FM Stereo
Multi-Media Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Locations and Functions
1
2
3
4
5
6
7
8
9
31
30
29
28
MHz
10
11
12
13
27
26
25 24 23
22
21
20
19 18 17 16 15
14
1. Power On/Off: Press to turn the unit on or off.
2. Radio Station Recall Buttons (1-3): Press and release when recalling preset radio stations. Press and
hold until the preset number appears to memorize a radio station.
3. Eject Button (
): Press to eject the disc.
4. Disc Slot: To play a disc, insert the disc into slot with label facing up.
5. Display Area: This area displays all function information for the radio, clock, disc player and auxiliary
input devices.
6. Radio Station Recall Buttons (4-6): Press and release when recalling preset radio stations. Press and
hold until the preset number appears to memorize a radio station.
7. Display Dimmer Button (DIM): Press to select the desired level of brightness of the display.
8. Repeat Button:
Disc Mode: Press to repeat a music disc track. Press again to cancel.
IPOD Mode: (See IPOD Operations section for more details).
9. Music Disc Intro Button: Press to preview each track on the music disc for 15 seconds. Press again
to cancel.
10. Music Disc Random Button: Press to play all the tracks on the music disc in random order. Press
again to cancel.
11. Radio Scan Button: Press this button and the tuner will scan up, pausing for 5 seconds at each
strong station. Press the button again to cancel the scan function.
12. Radio Seek Button: Press this button and the tuner will seek up to the next strong station and stop.
13. Infrared Eye: Receives the signals from the remote control.
14. Headphone Socket: Accepts 3.5mm stereo headphone jacks.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Locations and Functions (Continued)
�
15. Play/Pause and Mute Button ( ll):
Radio and Multimedia Input Modes: Press to mute volume level. Press again to restore.
Disc Mode: Press to pause disc play, press again to resume play.
IPOD Mode: Press to pause play, press again to resume play.
16. IPOD Selection Button: Press to choose IPOD input mode.
��
17. Seek Up (
l) Buttons:
Radio Mode: Press to tune the radio to a higher frequency.
Disc Mode: Press to search for the beginning of next track or chapter.
IPOD Mode: Press to search for the beginning of the next track.
18. USB/Disc Selection Button: Press to choose Disc and USB input modes.
��
19. Seek Down (l
) Buttons:
Radio Mode: Press to tune the radio to a lower frequency.
Disc Mode: Press to search for the beginning or previous track or chapter.
IPOD Mode: Press to search for the beginning of the previous track.
20. Volume and Select Knob: Rotate to increase or decrease the volume level. Press to select the sound
controls: Bass, Treble and Balance.
21. AM/FM Radio Selection Button: Press to choose Radio mode. Sequential presses will select radio
bands: FM1, FM2, FM2 (MHz) and AM1, AM2 (KHz).
22. Auxiliary Input Selection Button (AUX): Press to choose auxiliary input modes: Audio/Video input
front, Audio/Video input rear or Audio input rear.
23. Audio/Video Input Jack: Press the AUX button until “AV IN F” appears in the display then plug in a
device via the 3.5mm audio/video input plug.
Note: The RV5080 does not control the device, it just allows the audio/video to be played through the
system.
24. Reset Button: Press to reset the unit to it’s default settings.
25. USB Input: Press the USB/DISC button until “DISC” appears in the display. Then plug in your USB
device. “USB” will then appear in the display.
Note: The RV5080 will control the USB audio device. (See “USB Input” for more details).
26. Speaker Selection Buttons (A, B and C): Switches the speaker sets on and off. Refer to the LED indi-
cators above the button to determine if the speaker set is on or off.
27. Sleep Button (SLP): Sets the sleep timer. (See “Sleep Timer Operation” for more details).
28. Alarm Button (ALRM): Sets the alarm. (See “Alarm Operation” for more details).
29. Display Button (DISP): Press to display the clock or frequency in radio mode, track in music disc
mode, chapter and elapse time in movie disc mode or track in IPOD mode. Press and hold to perform
clock setting functions (See “Setting the Clock” for more details).
30. Radio AS/PS Button: Automatic radio station memory storing (AS) and Preset radio station scanning
(PS). (See “AM/FM Operation” for more details).
31. Equalizer and Loudness Button (EQ/LOUD): Press to select between the preset sound equalization
settings. Press and hold the button to boost high and low tones at low volume levels (loudness).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Button Locations and Functions
EJECT
POWER
MENU
SETUP
MODE
14
1
3
15
17
19
2
4
VOL
11. AS/PS Elapse Button:
16
18
20
21
TONE
Radio: Automatic radio station memory stor-
ing (AS) and Preset radio station scanning
(PS). (See “AM/FM Operation” for more
details).
VOL
VOL
5
ENTER
ZOOM
Disc: Press to display movie information.
DISP
REPEAT
EQ
6
7
12. Audio Button: Press to select appropriate movie
RANDOM
SLOW
22
audio/language setup.
23
8
1
4
2
5
3
6
9
9
13. Subtitle Button (SUB.TT): Press to access the
movie disc’s subtitle languages.
BAND
10
11
12
24
14. Eject Button (
): Press to eject the disc.
AS/PS
ELAPSE
7
8
15. Mode Button: Press to select between the dif-
+
AUDIO
SUB.TT
10/0
10
ferent modes: Radio, Disc and Auxiliary Input .
13
16. Stop Button (m): Press to stop disc play.
17. Play/Pause and Mute Button (
): Press
1. Power On/Off Button ( ): Press to turn the
unit on or off.
to pause disc play, press again to resume play.
��
18. Backwards (
Disc Play: Press
��
) or Fast Forward (
)
2. Menu Button: Press to access the Menu screen
in movie mode.
��
and “BACKWARD X 2”
appears in the display and the disc will play
backwards at 2 times the normal speed.
Press again and “BACKWARD X 4” will
appear. X8 and X20 speeds can also be
��
3. Sound Control Button (VOL/TONE): Press to
select the sound controls: Bass, Treble and
Balance.
selected. Fast Forward
button works the
4. Setup Button: Displays the on-screen SETUP
menu.
�
same way but fast forward. Press the ll
button at any time to resume normal play.
s
t
s
5. Volume Buttons (VOL / VOL ): Press VOL
19. Enter Button: Executes the selected item.
t
to increase or VOL decrease the volume level.
�
�
20. Navigation Buttons (s, , t, ): Moves
6. Display Button (DISP): Press to toggle through
the available display information.
feature selection up, down, left or right.
��
��
21. Down (l
), Up (
l) Buttons:
7. Repeat Button:
Radio Mode: Press to manually tune the radio
to a lower or higher frequency.
Disc Mode: Press to search for the beginning
or next track or chapter.
Disc: Press to repeat a music disc track or to
repeat a movie disc title or chapter. Press
again to cancel.
8. Random Button:
Disc: Press to play all the tracks on the music disc
22. Slow Button: Press to play the movie in slow
motion.
in random order. Press again to cancel.
23. Zoom Button: Press to enlarge or reduce the
9. Equalizer Button (EQ):Press to select between
the preset sound equalization settings. Press and
hold the button to boost high and low tones at
low volume levels (loudness).
movie’s on-screen image.
24. Numeric Buttons (1, 2, 3, 4, 5, 6, 7, 8, 9,
10/0 and 10+)
10. Band Button: Press to select the radio mode.
Sequential presses will select radio band:
FM1, FM2, FM2 (MHz) and AM1, AM2 (KHz).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operations
Power On/Off:
Press the button to turn the unit On/Off.
MHz
Selecting a Play Source:
To select a play source, press one of the follow-
ing mode buttons:
AUX: Audio/Video Input Front (AV IN F),
Audio/Video Input Rear (AV IN R) or
Audio Input Rear (AUX IN)
AM/FM: AM(KHz) or FM(Mhz) Radio Band (RADIO)
USB/DISC: USB Input (USB) or Disc (DISC)
i: IPOD Input (IPOD)
Dimming the Display:
Press the DIM button to select from the 4 levels
of brightness for the display area.
MHz
Display Selection:
Press the DISP button to display the clock.
Press again to return to previous display.
Press and hold to perform clock setting func-
tions (See “Setting the Clock” for more details).
Sound Controls
Volume:
Increase the volume by rotating the VOLUME
knob clockwise. Decrease the volume by rotating
the Volume knob counterclockwise.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Controls
Bass, Treble and Balance Control
Select the desired sound mode by pressing the VOLUME knob. The modes will be displayed in the fol-
lowing order: Bass, Treble, Balance and Volume.
Bass:
Select the Bass mode by pressing the VOLUME
knob. Increase the Bass by rotating the knob
clockwise. Decrease the Bass by rotating the
knob counterclockwise. After 6 seconds control
reverts back to volume control.
Treble:
Select the Treble mode by pressing the VOLUME
knob. Increase the Treble by rotating the knob
clockwise. Decrease the Treble by rotating the
knob counterclockwise. After 6 seconds control
reverts back to volume control.
Balance:
Select the Balance mode by pressing the VOLUME
knob. Adjust the Balance by rotating the knob.
-
R
R
L
L = Equal sound Right and Left
7 = Right speaker only
7 = Left speaker only
-
After 6 seconds control reverts back to volume
control.
Equalizer (EQ):
Press the EQ button to choose between the
preset equalizer settings: Normal, Classic, Rock,
Pop and Jazz as indicated in the display area.
Loud:
To boost high and low tones at low volume
levels, press and hold the EQ button until “LOUD
ON” appears in the display. To deselect, press
and hold the EQ button again until “LOUD OFF”
appears in the display.
Hold
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Controls (Continued)
Mute:
Press the MUTE button to mute the volume
level. Press the MUTE button again to restore the
volume.
Speaker Selection
Selecting Speaker Sets:
• Press the A button to toggle speaker set A on
and off. The LED above SPEAKER A lights up
when speaker set A is on.
• Press the B button to toggle speaker set A on
and off. The LED above SPEAKER B lights up
when speaker set B is on.
• Press the C button to toggle speaker set A on
and off. The LED above SPEAKER C lights up
when speaker set C is on.
Setting the Clock
1. Press the DISP button until the clock appears in
the display.
2. Press and hold the DISP button until the Hours
number starts flashing.
Hold
3. Rotate the VOLUME knob until the correct Hour
appears in the display.
Note: When setting the clock make sure to
select the correct AM or PM.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock (Continued)
4. Press the VOLUME knob and the Minute indica-
tors will start flashing.
5. Rotate the VOLUME knob until the correct
Minutes appears in the display. Wait 5 seconds
and the colon between the hours and the min-
utes will start flashing indicating the clock is set.
Sleep Timer Operation
Setting the Sleep Timer:
1. Press the SLP button and “SLEEP 10” appears
in the display.
2. Keep pressing the SLP button again until the
desired sleep time appears in the display (0,
10, 20, 30, 40, 50, 60, 70, 80 minutes).
3. Wait 5 seconds and the display will return to
normal operation and “SLEEP” will appear in
the display.
4. After the designated sleep timer has expired
the unit will turn off automatically
.
Cancelling the Sleep Timer:
1. Press the SLP button until “0” is displayed.
2. Wait 5 seconds and the display will return to
normal operation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm Operation
Setting the Alarm Timer:
1. Press the ALM button and the clock will
appear in the display with the Hour number
flashing.
2. Rotate the VOLUME knob until the correct Hour
appears in the display. “ALARM” will appear in
the display indicating the alarm is activated.
Note 1: When setting the alarm clock make
sure to select the correct AM or PM indicator.
Note 2: When setting the alarm DO NOT use
12:00 AM, because that time is used to cancel
the alarm.
3. Press the VOLUME knob and the Minute indi-
cators will start flashing.
4. Rotate the VOLUME knob until the correct
Minutes appears in the display. Wait 5 seconds
and the colon between the hours and the min-
utes will start flashing. “ALARM” will appear
in the display indicating the alarm is set.
5. Press the POWER button to turn the unit off.
The unit will automatically turn on when the
set alarm time is reached.
Cancelling the Alarm Timer:
Follow the procedures above except set the
alarm time to “A AM 12:00”. “ALARM” will dis-
appear in the display indicating the alarm has
been cancelled.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operations
Selecting the Play Source:
Press the AM/FM button and “RADIO” appears in
the display. After a brief moment either KHZ (AM)
or MHZ (FM) will appear in the display.
Selecting the AM or FM:
Press the AM/FM button repeatedly and select
from MHZ (FM) 1, 2, 3, KHZ (AM) 1 or 2.
FM Band
Indicator (MHz) Indicator (KHz)
FM Stereo
Indicator
(STEREO)
AM Band
Preset Bank Preset Button
Number
Radio
Frequency
Manually Tuning in a Radio Station:
��
Press the l
button to tune in a lower radio
��
frequency. Press the
l button to tune in a
higher radio frequency.
Note: The unit will automatically switch from
FM Mono to FM Stereo when the signal strength
increases to a stereo level. If the stereo signal
should become weak, the unit will switch back
to Mono. FM stereo reception is indicated when
“STEREO” appears in the display.
Tuning in a Radio Station Using Seek:
Press the SEEK button and the tuner will scan up
to the next strong station and stop seeking, then
start playing.
Tuning in a Radio Station Using Scan:
Press the SCAN button and the tuner will scan
up to the next strong station and pause for 10
seconds, then scan for the next strong station.
To cancel this function press the SCAN button
again.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation (Continued)
Memorizing Radio Stations:
1. Press the AM/FM button to select either the
MHz (FM) 1, 2, 3, KHz (AM) 1 or 2 radio bank.
2. Tune-in the desired radio station.
3. To memorize the station press and hold any-
one of the six radio station recall buttons until
the preset number appears.
Automatically Store Radio Stations:
1. Press the AM/FM button to select either the
MHz (FM) or KHz (AM) radio band.
2. Press and hold the AS/PS button then release.
The tuner will search for the strongest sta-
tions and store them into memory. The new
stations will replace stations that were previ-
ously stored in the current band.
Hold
Note: When the MHz (FM) band is selected the 18
strongest stations will be stored. When KHz (AM)
band is selected the 12 strongest stations will be
stored.
Scanning Stored Radio Stations:
1. Press the AM/FM button to select either the
FM or AM radio band.
2. Press the AS/PS button then release. The
tuner scans for preset stations stored in
the current band and pauses for 6 seconds
at each station. When a desired station is
reached, press the AS/PS button again to
stop scanning.
Disc Warnings
Handling and Cleaning:
•
Dirt, dust, scratches and warping disc will cause
non-operation.
Label side up
• Do not place stickers on disc or scratch disc.
• Do not warp discs.
•
A disc should always be kept in its case when not
in use to prevent damage.
Do not touch
the underside
of the disc
• Do not place discs in the following places: Direct
sunlight, Dirty, dusty and damp areas, Near car
heaters, Car seats or dashboard.
Do not bend
Disc Cleaning:
Use a dry soft cloth to wipe disc the surface. If the
disc is quite dirty, use a soft cloth slightly moist
with isopropyl (rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional record
cleaners as they may mar the surface of the disc.
Wipe the disc from
the center toward
the outside edge
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc Operation
Label Side Up
General Operations:
Gently insert the disc into the slot with the
label side up. The unit will automatically
load the disc.
Note: If a disc does not auto-load DO NOT
FORCE into the slot, as you may already
have a disc loaded.
Track Number
Music Track Selection:
��
Press the l
button to select a lower track.
��
Press the
l button to select a higher track.
The track number will appear in the display.
Tracks can also be selected by using the
remote control. Press the track selection num-
ber button that corresponds to the track you
want to play.
For example: If you want to play track 8, press
button 8. Track 8 will start playing and “8” will
appear in the display.
DISP
REPEAT
EQ
RANDOM
ZOOM
SLOW
If you want to play track 12, press button 10+, fol-
lowed immediately by button 2. Track 12 will start
playing and “12” will appear in the display.
1
4
2
5
3
6
BAND
AS/PS
ELAPSE
7
8
+
AUDIO
SUB.TT
10/0
10
Pausing the Disc:
�
Press the ll button to pause the disc and
“PAUSE” will appear in the display. Press it again
to resume play and “PAUSE” will disappear from
the display.
�
Note: You can also press the ll on the remote
control.
EJECT
POWER
MENU
SETUP
MODE
VOL
TONE
VOL
VOL
ENTER
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc Operation (Continued)
Stopping the Disc:
EJECT
POWER
m
MENU
SETUP
MODE
Press the button to stop the disc. To resume
�
play, press the ll button.
VOL
TONE
m
Pressing the button 2 times, then pressing the
VOL
VOL
�
ll button will play the disc from the beginning.
ENTER
Ejecting the Disc:
Press the
button to eject a disc.
Repeating a Music Track or Entire Disc:
Select the desired track to repeat, then press
the REPEAT button twice “REPEAT” and
will
appear in the display. This track will play repeatedly.
Press the REPEAT button one more time
“REPEAT” and
will appear in the display. The
entire disc will now be repeated.
To cancel this feature press the REPEAT button
again and nothing will appear in the display. The
disc will stop playing when the end of the disc
is reached.
Preview Music Tracks:
Press the INTRO button to play the first 15 sec-
onds of each track, “INTRO” will appear in the
display. Press it again to stop introduction scan
and listen to the track and “INTRO” will disappear
from the display.
Random Music Track Play Order:
Press the RANDM button and the tracks on the
disc will play in a random order, “RANDOM”
will appear in the display. To cancel this feature
press the RANDM button again and “RANDOM”
will disappear from the display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc Operation (Continued)
Elapse Times:
Continue to press the AS/PS button during
music disc play to display the following disc
information in this order:
Single Elapse, Single Remain, Total Elapse and
Total Remain.
MP3 Disc Operation
Label Side Up
General Operations:
Gently insert the disc into the slot with the
label side up. The unit will automatically
load the disc.
Note: If a disc does not auto-load DO NOT
FORCE into the slot, as you may already
have a disc loaded.
File Number
Disc File Selection:
��
Press the l
button to select a lower file.
��
Press the
l button to select a higher file. The
track number will appear in the display.
Files can also be selected by using the remote
control. Press the file selection number button
that corresponds to the file you want to play.
For example: If you want to play file 8, press but-
ton 8. File 8 will start playing and “8” will appear
in the display.
EQ
1
4
2
5
3
6
If you want to play file 12, press button 10+, fol-
lowed immediately by button 2. File 12 will start
playing and “12” will appear in the display.
BAND
AS/PS
ELAPSE
7
8
+
10
AUDIO
SUB.TT
10/0
Pausing the Disc:
�
Press the ll button to pause the disc and
“PAUSE” will appear in the display. Press it again
to resume play and “PAUSE” will disappear from
the display.
�
Note: You can also press the ll on the remote
control.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Disc Operation (Continued)
Stopping the Disc:
EJECT
POWER
m
Press the button to stop the disc. To resume
MENU
SETUP
MODE
�
play, press the ll button.
VOL
TONE
m
Pressing the button 2 times, then pressing
the ll button will play the disc from the begin-
ning.
VOL
VOL
�
ENTER
Ejecting the Disc:
Press the
button to eject a disc.
Repeating a Music File or Entire Disc:
Select the desired file to repeat, then press the
REPEAT button “REPEAT” and
will appear in
the display. This track will play repeatedly.
Press the REPEAT button one more time
“REPEAT” and
will appear in the display. The
entire disc will now be repeated.
To cancel this feature press the REPEAT button
again and nothing will appear in the display. The
disc will stop playing when the end of the disc
is reached.
Random Music File Play Order:
Press the RANDM button and the files on the
disc will play in a random order, “RANDOM”
will appear in the display. To cancel this feature
press the RANDM button again and “RANDOM”
will disappear from the display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Disc Operation
Label Side Up
General Operations:
Gently insert the disc into the slot with the
label side up. The unit will automatically
load the disc. “LOADING” will appear in the
display and the disc will automatically start
playing.
Note: If a disc does not auto-load DO NOT
FORCE into the slot, as you may already
have a disc loaded.
Menu Function:
VOL
SETUP
TONE
1. Press the MENU button during disc play and
the main menu will be displayed.
VOL
VOL
2. Scroll through the menu with the navigation
ENTER
�
�
buttons (s, , t,
)
on the remote control.
DISP
3. Select a feature by pressing the ENTER button.
Pausing the Movie
�
Press the ll button to pause the player,
“PAUSE” will appear in the display. Press it again
to resume play, and “PAUSE” will disappear from
the display.
Stopping a Movie:
EJECT
POWER
MENU
m
Press the button to stop the movie. To resume
MODE
�
play, press the ll button.
VOL
SETUP
TONE
m
Pressing the button 2 times. Then pressing
the ll button and the movie will start playing
from the beginning.
VOL
VOL
�
ENTER
Chapter Number
Movie Chapter Selection:
��
Press the l
button to select a lower chapter.
��
Press the
l button to select a higher chapter.
The chapter number will appear in the display.
Chapter selection can also be selected by using
the remote control. Press the chapter selection
number button that corresponds to the chapter
you want to play.
For example: If you want to play chapter 8, press
button 8 button.
If you want to play chapter 28, press the 10+
button twice followed immediately by button 8.
Chapter 28 will start playing and “28” will appear
in the display.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Disc Operation (Continued)
Fast Forward / Backwards Movie Play:
EJECT
POWER
��
��
Press the
(fast forward) or
(backwards)
MENU
SETUP
MODE
button on the remote control during play. Each
time the button is pressed the speed of fast for-
ward/ backwards changes in the following order:
VOL
TONE
2X, 4X, 8X, 20X
ENTER
�
To resume normal play, press the ll (Play)
button.
VOL
VOL
Slow Motion:
Continue to press the SLOW button to play the
movie is slow motion in the following order:
ENTER
ZOOM
DISP
REPEAT
EQ
SF 1/2, SF 1/3, SF 1/4, SF 1/5, SF 1/6, SF 1/7,
SB 1/2, SB 1/3, SB 1/4, SB 1/5, SB 1/6, SB 1/7
RANDOM
SLOW
1
4
2
5
3
6
�
To resume normal play, press the ll (Play)
button.
BAND
VOL
VOL
Zooming the Image:
To enlarge the on-screen image during disc play,
press the ZOOM button. Each time the button is
pressed, the magnification increment changes in
the following order:
ENTER
DISP
REPEAT
EQ
RANDOM
ZOOM
SLOW
2X, 3X, 4X, 1/2, 1/3, 1/4.
1
4
2
5
6
Use the navigation buttons to move the image on
the screen.
BAND
DISP
REPEAT
EQ
Repeat:
Continue to press the REPEAT button to select
a repeat mode in the following order:
RANDOM
ZOOM
SLOW
1
4
2
5
3
6
Repeat Chapter, Repeat Title, Off.
BAND
Elapse Times:
EQ
1
4
2
5
3
6
9
Continue to press the AS/PS ELAPSE button during
movie play to display the following information in
this order for most discs:
BAND
AS/PS
ELAPSE
7
8
Title Elapse, Title Remain, Chapter Elapse,
Chapter Remain and Display Off.
+
AUDIO
SUB.TT
10/0
10
Subtitle Language Menu:
EQ
1
4
2
5
3
6
9
Press the SUB.TT button during playback. Each
time the button is pressed, the subtitle lan-
guage changes in sequential order.
• Some discs may only contain one subtitle
language.
BAND
AS/PS
ELAPSE
7
8
+
AUDIO
SUB.TT
10/0
10
• Depending on the disc, the number of subtitle
languages may be different.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Disc Operation (Continued)
Audio Language Menu:
AS/PS
ELAPSE
7
8
9
Press the AUDIO button during playback to review
the current setting. Most movies have their own
audio setup. Go to the on-screen menu to select
appropriate audio/language setup.
+
AUDIO
SUB.TT
10/0
10
Setup Menu
EJECT
POWER
Accessing the Movie Disc Setup Menu:
Press the SETUP button on the remote control to
display the Setup Menu.
MENU
SETUP
MODE
VOL
TONE
OL
System Setup
Page
Language Setup
Page
Speaker Setup
Page
Audio Setup Video Setup
Page Page
SYSTEM SETUP
TV SYSTEM
TV TYPE
PASSWORD
RATING
DEFAULT
System Setup Page:
Audio Setup Page:
Use the navigation buttons to scroll between the
menu items. Make a selection by pressing the
ENTER button.
Use the navigation buttons to scroll between the
menu items. Make a selection by pressing the
ENTER button. Audio Submenu Options:
• Audio Out: SPDIF/OFF, SPDIF/Raw or SPDIF/
PCM.
• TV System: NTSC, PAL or Auto
• TV Type: 4:3PS, 4:3LB or 16:9.
• Password: _ _ _ _
.
Video Setup Page:
• Rating: 1 Kid Safe, 2 G, 3 PG, 4 PG13,
5 PG-R, 6 R, 7 NC-17, 8 Adult.
• Default: Restore
Use the navigation buttons to scroll between the
menu items. Make a selection by pressing the
ENTER button. Video Submenu Options:
Language Setup Page:
• Brightness: 12, 10, 8, 6, 4, 2 or 0.
• Contrast: 12, 10, 8, 6, 4, 2 or 0.
• Hue: +6, +4, +2, 0, -2, -4 or -6.
• Saturation: 12, 10, 8, 6, 4, 2 or 0.
• Sharpness: 8, 6, 4, 2 or 0.
Use the navigation buttons to scroll between the
menu items. Make a selection by pressing the
ENTER button. Language Setup Options:
• OSD Language: English or Spanish.
• Audio Lang: Chinese, English, Japan, French,
Spanish, Portuguese, Latin or German.
Digital Setup Page:
• Subtitle Lang: Chinese, English, Japan,
French, Spanish, Portuguese, German or Off.
Use the navigation buttons to scroll between the
menu items. Make a selection by pressing the
ENTER button. Digital Submenu Options:
• Dynamic Range: Full, 6/8, 4/8, 2/8 or Off.
• Dual Mono: Stereo, Mono L, Mono R or Mix
Mono.
• Menu Lang: Chinese, English, Japan, French,
Spanish, Portuguese, German or Latin.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
IPOD Operation
General Operations:
1. Connect an IPOD to the cable attached to the
RV5080.
2. The unit will automatically switch to the IPOD
mode and start playing.
Note: The IPOD controls will become inoperable,
and the RV5080 now controls the IPOD.
IPOD Mode Button Location and Functions:
4
1
2
3
�
1. Seek Button: Same operation as the MENU but- 3. Play/Pause Button ( ll ): Same operation as
�
the ll button on an IPOD.
ton on an IPOD.
2. Track Up/Down Buttons: Press these buttons
to scroll through the menu items, which is the
same operation as the IPOD’s Click Wheel.
4. Scan Button: Same operation as the Center
Select/Enter button on an IPOD.
Browse for a Song:
1. Press the SEEK button and “PLAYLIST” will
appear in the display.
��
2. Press the
menu.
l button to select the “SONGS”
20
Download from Www.Somanuals.com. All Manuals Search And Download.
IPOD Operation (Continued)
3. Press the SCAN button to select the SONGS
menu.
��
l
��
4. Press the
or
l
button to select the
desired song from the menu. The selected
song will automatically start playing.
Pausing a Track:
�
Press the ll button to pause the track. Press it
again to resume play.
Repeating a Track:
Select the desired track to repeat, then press the
REPEAT button once and “REPEAT” will appear
in the display. This track will play repeatedly. To
cancel this function press the REPEAT button
one more time, and “REPEAT” will disappear
from the display.
Preview Tracks:
Press the INTRO button and “INTRO” appears
in the display. Each track on the IPOD will now
play for 10 seconds. To cancel this feature press
the INTRO button and “INTRO” disappears from
the display.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
IPOD Operation (Continued)
Display Selection:
Press the DISPLAY button to display the follow-
ing track information: Elapse Time, Artist, Album
and Title.
Manually Selecting the IPOD Source:
If a different source is playing and you wish to
listen to the IPOD, press the i button until “IPOD
AUT” appears in the display. The last song that
was playing on the IPOD will resume.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Input
Selecting USB Audio Play Source:
Press the USB/DISC button and “DISC” appears
in the display. Remove the cover from the USB
port. Insert the USB device and the files will
automatically start playing.
Note: You can insert the USB device in any
mode, the unit will automatically switch modes
and start playing the USB device.
File Number
Disc File Selection:
��
Press the
l button to select a lower file.
��
Press the l
button to select a higher file. The
file number will appear in the display.
File selection can also be selected by using the
remote control. Press the file selection number
button that corresponds to the file you want to
play then press the ENTER button.
For example: If you want to play file 8, press but-
ton 8, then the ENTER button.
EQ
1
4
2
5
3
6
If you want to play file 28, press 10+, then press
button 2, followed immediately by button 8 and
finally press the ENTER button. File 28 will start
playing and “28” will appear in the display.
BAND
AS/PS
ELAPSE
7
8
+
AUDIO
SUB.TT
10/0
10
Pausing a MP3 Player:
�
Press the ll button to pause the player,
“PAUSE” will appear in the display. Press it again
to resume play, and “PAUSE” will disappear from
the display.
Stopping a MP3 Player:
EJECT
POWER
m
Press the button to stop play. To resume play,
MENU
SETUP
MODE
�
press the ll button and play will begin from the
VOL
TONE
first file.
VOL
VOL
ENTER
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio/Video Input
Selecting the Audio/Video Source:
Note: The RV5080 does not control the device, it
just allows the audio/video to be played through
the system.
Front Audio/Video Input:
Insert the 3.5mm jack from the audio/video
device into the AV input socket on the front
of the housing. Press the AUX button until
“AV IN F” appears in the display. Refer to
the audio/video device’s owner’s manual for
proper operation.
Rear Audio/Video Input:
U N E
M
To select the rear input Audio/Video play
source, press the AUX button until “AV IN R”
appears in the display. Refer to the audio/video
device’s owners manual for proper operation.
Audio Input
Selecting the Audio Source:
Note: The RV5080 does not control the device,
it just allows the audio to be played through the
system.
Dual RCA Rear Audio Input:
Press the AUX button until “AUX IN” appears
in the display.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Headphone Output
Plugging in Headphone:
Insert a 3.5mm headphone jack into the
Headphone Output socket. Use the Volume knob
on the headphone to adjust the audio level.
Note: To make it so the sound only can be heard
through the headphones press the A, B, C but-
tons once to deselected speaker sets A, B and C.
The LED indicators for each speaker set will be off.
Reset Button
The LCD display may fail to function normally due
to the vehicle’s battery condition, and could require
resetting the radio microprocessor if:
• The vehicle has been “jump started” from a
dead battery condition.
• The vehicle battery becomes very low and is
quick-charged.
• The vehicle battery is removed and replaced.
Should any of these conditions occur, simply press
and release the RESET button on the radio front
panel using the tip of a ball point pen. This will reset
the radio microprocessor to the original factory set-
tings. After pressing the RESET button you should
recheck to see if the radio functions normally.
Reset Button
Additional Feature
Area Radio Frequency Adjustment:
Note: If operating the unit in the USA, do not
change the area.
To Change the Area:
1. Press the AM/FM button and “RADIO” appears
in the display.
2. Press and hold the VOL/TONE knob until
“SETUP” appears in the display
.
�
3. Press the ll button and “US” or “OCEAN”
will be displayed
.
��
��
4. Press the
l
or
l
button to change the
.
setting to US or OCEAN
�
5. Press the ll button to save the setting. The
unit will clear all the station settings. After wait-
ing a few seconds the unit exit programming.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
93/ ”
8
Wall
Panel
1
4
/ ”
6
Chassis Opening
Structural Stud
Caution: Do not install radio without rear cover installed:
No user-serviceable parts inside. Rear cover provides
protection against potential fire hazard.
Trim Ring
5
8
”
/
4
93
4
”
/
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Connections
Left
Speaker A
Right
Speaker A
_
_
Gray/Black Wire
Gray Wire
Brown/Black Wire
+
+
Brown Wire
Left
Speaker B
Right
Speaker B
_
_
Blue/Black Wire
Green/Black Wire
+
+
Blue Wire
Green Wire
Left
Speaker C
Right
Speaker C
+
_
+
Purple Wire
White Wire
_
Purple/Black Wire
White/Black Wire
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring and Auxiliary Connections
External Automotive
Type Antenna
(Optional)
IPOD
(Optional)
IPOD Cable (Optional)
Red Wire (+) to 12 Volt DC Power
Black Wire Ground
AV In
AV Out
15A Fuse
Movie Disc Player
(Optional)
Monitor
(Optional)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring and Auxiliary Connections (Continued)
Analog
Audio In
Monitor
(Optional)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
•
Read Instructions: All the safety and operating instructions should be read before the appliance is operated.
• Retain Instructions: The safety and operating instructions should be retained for future reference.
• Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to.
• Follow Instructions: All operating and use instructions should be followed.
• Water and Moisture: The appliance should not be used near water. For example, near a bathtub, wash-
bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.
• Wall or Cabinet Mounting: The appliance should be mounted to a wall or cabinet only recommended by
the manufacturer.
• Heat: The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
• Power Supply: The appliance should be connected to a power supply only of the type described in the
operating instructions or as marked on the appliance.
• Power Lines: An outdoor antenna should be located away from power lines.
• Object and Liquid Entry: Care should be taken so that objects do not fall, and liquids are not spilled into
the enclosure through openings.
Outdoor Antenna Grounding:
If an outside antenna is connected to the receiver, be sure the antenna system is grounded, so as to
provide some protection against voltage surges and built up static charges. Section 810 of the National
Electrical Code, ANSI/NFPS No. 70-1983, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See illustration below.
Example of Antenna Grounding as per
National Electrical Code. Instructions
Contained in Article 810-"Radio and
Television Equipment"
Antenna Lead-In
Wire (B)
Mast
Ground
Clamp
Antenna Discharge Unit (C)
To Receiver
Ground Wire
(A,B )
Grounding
Clamps
Grounding Electrode
Driven 8’ Into the Earth
2.44 Meters
A. Use No. 10 AWG (5.3mm2) copper, No. 8 AWG (8.4mm2) aluminum, No. 17 AWG (1.0mm2) copper clad steel or
bronze wire, or larger as ground wire.
B. Secure antenna lead-in and ground wires to house with stand-off insulators spaced from 4 feet (1.22m) to 6 feet
(1.83m) apart.
C. Mount antenna discharge unit as close as possible to where lead-in enters house.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
ONE (1) YEAR LIMITED WARRANTY
Magnadyne Corporation or its authorized agents will within one year from the date of sale
to you, repair, replace or refund the retail sales price of said product or any part thereof, at
the option of the Magnadyne Corporation or its authorized agents, if said product or part
is found defective in materials or workmanship, when properly connected and operating
on the correct power requirements designated for the specific product. This warranty and
Magnadyne Corporation or its authorized agent’s obligations hereunder do not apply where
the product was; damaged while in the possession of the consumer, subjected to unrea-
sonable or unintended use, not reasonably maintained, utilized in commercial or industrial
operations, or serviced by anyone other than Magnadyne Corporation or its authorized
agents, or where the warning seal on the product is broken or the power and/or plugs
are detached from the unit. Magnadyne Corporation or any of its authorized agents will
not assume any labor costs for the removal and reinstallation of any product found to be
defective, or the cost of transportation to Magnadyne Corporation or its authorized agents.
Such cost are the sole responsibility of the purchaser.
This warranty does not cover the cabinet appearance items or accessories used in
connection with this product, or any damage to recording or recording tape, or any
damage to the products resulting from improper installation, alteration, accident,
misuse, abuse or acts of nature.
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO
ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE
ACCORDED BY LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN
EXCEPT THOSE SET FORTH HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND
ONE YEAR FROM THE DATE OF SALE.
This warranty extends only to the original purchaser of the product and is not
transferable. Some states do not allow limitations on how long an implied warranty
lasts, and some states do not allow the exclusion or limitation of incidental or conse-
quential damages, so the above limitations or exclusion may not apply to you. This
warranty gives you specific legal rights, and you may have other rights that vary from
state to state.
“NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void the
User’s authority to operate the equipment.”
Defective merchandise should be returned to the original point of purchase or
secondly, to Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220.
Return Authorization must be obtained before sending, or merchandise may be refused.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
© Copyright 2011
Magnadyne Corporation
RV5080-UM
Rev. A 4-20-11
Download from Www.Somanuals.com. All Manuals Search And Download.
|