ENGINE DRIVEN WELDERS
®
Vantage 400
Output
Compact, Multi-Process, Excellent Value
CC
CV
The Vantage® 400 is one of the most compact 400 amp engine-driven welder/
generators in the construction, pipe or rental fleet market today. It’s also one of
the most quiet, with a smooth running 4-cylinder Perkins® diesel engine. Use this
multi-process welder for arc gouging with up to 5/16" carbons, stick welding with
up to 1/4" electrodes and CV wire welding with up to 3/32" wire. You’ll value the
DC
superior arc performance delivered by Lincoln
Chopper Technology®. You'll
19P
also appreciate VRD™ (Voltage Reduction Device™), which reduces OCV (open
circuit voltage) in the CC-Stick weld mode for added safety.
kW
Input
This model efficiency generates 19,000 watts (peak) of 3-phase or 12,000 watts
of 1-phase AC generator power for your lights, grinders and power tools. And, it's
housed in a rugged, low maintenance stainless steel enclosure and loaded with
many innovative service features. That all totals up to an excellent value!
D
Processes
Stick, TIG, MIG, Flux-Cored, Gouging
Advantage Lincoln
• Compact Case
- One of the most compact 400 amp machines available. Suitable
for many pickup and service trucks.
• Arc Gouging
- Arc gouging with up to 5/16" carbons.
•
Reliable Engine
• Stainless Steel Enclosure
- Standard stainless steel roof, side panels and engine-access door
deliver added protection and durability.
- 4 cylinder 1800 RPM Perkins® diesel engine runs smooth and
quiet. Standard engine gauges allow you to monitor performance
at a glance.
• Multi-Process Welding, Simple to Operate
• Low Noise
- Select one of four Process Modes, including CC-Stick (up to
- 99.1 dBA Lwa sound power (74.8 dB at 23 ft./7 m) is one of the
quietest 400 amp engine-driven welders available.
1/4"), Downhill Pipe (for stick), Touch-Start® DC TIG or CV-Wire
(1)
(up to 3/32" ), and then dial in the desired output.
• Innovative Service Access
• VRD™ Voltage Reduction Device™
- Reduced OCV in the CC-Stick weld mode for added safety.
- First engine-driven welder in North America having this standard
feature.
- Lockable, removable sliding engine access door provides ample
space for engine and oil filter work without requiring a large
clearance space on your truck.
- Battery drawer on front of machine and top-mounted radiator cover
provide convenient access to these systems.
- Patented tilt down control panel for easy servicing of internal
components.
- Patented radiator cap cover is latched for easy access and is lockable.
• Plenty of AC Generator Power
- 19 kW peak (17 kW continuous) 3-Phase 240V AC generator
power. Will power industrial equipment such as a plasma cutter,
pump or inverter welder.
- 12 kW peak (11 kW continuous) 1-phase AC generator power for
common construction tools.
(1)
3/32" E70T-6 up to 260 IPM, 27V.
TECHNICAL SPECIFICATIONS
Dimensions
HxWxD
Inches (mm)
Net
Weight
lbs (kg)
No. of
Cyl.
HP & Speed
(rpm)
Product
Name
Rated Output
Current/Voltage/Duty Cycle
Output
Range
Engine
Model
Perkins® 404D-22
Diesel
Vantage® 400
400A/36V/100%
450A/32V/100%
4
32.7@1800
30-500A DC
40-300A Pipe
20-250A DC TIG
14-36V CV
35.9 x 25.3 x 60.0
(913 x 642 x 1524)
1230
(559)
EPA Tier 4i
3-Phase AC Power:
19 kW Peak
17 kW Continuous
1-Phase AC Power:
12 kW Peak
11 kW Continuous
Publication E6.210 10/05
Web Update 4/08
Download from Www.Somanuals.com. All Manuals Search And Download.
A CLOSER LOOK
FEATURES
Single-side engine access
with lockable sliding door.
Convenient slide-out battery
drawer below control panel.
Patent-pending latched
and lockable radiator cap
cover.
Fuel, Oil Pressure and Engine
Temperature gauges help you
monitor performance.
Output automatically switches
to remote mode when remote
device is connected.
Handy oil drain valve and tube
makes oil changes easy.
• Simple Controls – Keeps training time to a minimum. The flip-down
control panel door keeps less frequently used dials out of the way.
Scratch-resistant Lexan® nameplate.
greater fuel economy and reduced noise. Glow plug button for cold
weather starting.
• Engine hour meter for scheduled maintenance.
• Digital weld meters for amps and volts output make it easy to
precisely set your procedures.
• LN-25 PRO Across-the-Arc wire feeder is a recommended option.
• 14-pin connector for Lincoln wire feeders with control cables LF-72,
LF-74, LN-7, LN-8, LN-15, LN-23P, LN-25 and LN-742. Also com-
patible with Magnum® SG Spool Gun System.
• Two Vantage® 400 units can be paralleled in the CC-Stick Mode to
increase output.
• Large 15 gallon (57 liter) fuel tank provides run time for an extended
day—12 hours of welding at 400A/36V/100% duty cycle output, or
36 hours at high idle.
• Great Engine Choice – 32.7 horsepower water-cooled 4 cylinder
Perkins® 404D-22 diesel engine. Engine has an automatic idler for
Key Controls
2
1
24
23
1. Glow Plug Button
2. Weld Mode Selector Switch
3. Run/Stop Switch
4. Hour Meter
5. Start Push button
6. Engine Idler Switch
7. Fuel Level, Engine Temperature and
3
4
22
21
20
Oil Pressure Gauges
8. Engine Protection Light
9. Engine Battery Charging Light
10. 120 VAC Circuit Breakers
11. 120 VAC GFCI Receptacles
12. 120/240 VAC Full-KVA 1-Phase Receptacle
13. 240 VAC Full-KVA 3-Phase Receptacle
14. Full-KVA 1- & 3-Phase Circuit Breaker
15. Covered Weld Output Terminals + and -
16. Ground Stud
19
18
5
6
7
8
9
17
17. 14-Pin Wire Feeder Connector
18. 6-Pin Remote Control Connector
19. Arc Force & Inductance/Pinch Control Dial
20. Welding Terminals Control Switch
21. Wire Feeder Voltmeter Polarity Switch
22. Digital Amps and Volts Output Meters
23. VRD Indicator Lights
10
16
15
24. Output Control Dial
11
12
13
14
Note: Control panel door not shown.
Vantage® 400
[3]
Download from Www.Somanuals.com. All Manuals Search And Download.
A CLOSER LOOK
QUALITY AND RELIABILITY
• Simple wire harnessing keeps connections to a minimum for greater
reliability. Lead and harness strain reliefs on all control connections
help ensure trouble-free performance.
• Printed circuit boards are environmentally-shielded using Lincoln’s
engineered potting and protective frame trays.
• Engine Protection System includes automatic shutdown for low oil
pressure or high engine temperature.
• Indicator light turns on for low oil pressure or high engine
temperature. A second indicator light turns on if the engine
battery charging system malfunctions.
• Circuit breaker protection on the battery ignition system provides
added component protection.
• Dependability and long life aided by all-copper windings in rotor and
stator with high quality insulation.
• Environmental friendly engine! Engine has a closed breather
system to keep the engine compartment and ground clean. This
system eliminates oil mist from collecting inside the engine
compartment, especially on surfaces that would lower engine
cooling efficiency.
• Standard stainless steel roof, side panels and engine-access door
deliver added protection, durability and corrosion-resistance.
Eliminates the need to paint or replace rusting panels.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
• Self-bleeding engine simplifies startup if your fuel tank runs dry.
• Perkins® engine camshaft is gear-driven. No timing belt maintenance.
• Three-Year Lincoln Warranty on welder. (Engine is warranted
separately by the manufacturer.)
MACHINE SPECIFICATIONS
Dimensions (6)
H x W x L
inches (mm)
Product
Name
Ordering
Information
CC/Pipe-Rated DC Output(1)
Current/Voltage/Duty Cycle Current/Voltage/Duty Cycle AC Power(3)(4)
CV Rated Output(1)
Weight
lbs. (kg)
Description
Vantage® 400
400 Amp DC Welder with
Engine Gauges
DC Constant Current
400A/36V/100%
450A/32V/100%
30-500 Amps
DC Constant Voltage(2)
400A/36V/100%
19,000 Peak
Watts, 60 Hz
35.9 x 25.3 x 60.0
(913 x 642 x 1524)
1230
(559)
K2410-2
450A/32V/100%
19,000 Watts Peak
17,000 Watts
Continuous AC Power
3-Phase
Two 120V
Duplex GFCI
Receptacles
20A Per Duplex
40A Total (5)
14-36V
Single Dial
Continuous Control
DC Pipe Current
300A/32V/100%
40-300A
®
12,000 Watts Peak
11,000 Watts
Continuous AC Power
1-Phase
Touch-Start TIG Range
Wire Feeder Power
120V/60Hz
1-Phase
Full KVA
250A/30V/100%
20-250 Amps
42V/60Hz
Receptacle
46A@240V
Single Dial
Continuous Control
60V DC Max OCV
@1880 RPM
46A@120V Each
Branch Circuit(5)
3-Phase
Full KVA
Receptacle
41A@240V
(1) High Altitude: For maximum rating, derate the output 2.5% to 3.5% for every 1,000 ft. (300 m). High Temperature: For maximum rating, derate 2 volts for every 18°F (10°C)
above 104°F (40°C).
(2) DC Constant Voltage capability provides convenience and added safety when welding in electrically hazardous conditions.
(3) When welding, available auxiliary power will be reduced. Output voltage is within +/- 10% at all loads up to rated capacity.
(4) 120V will operate either 60Hz or 50/60 Hz power tools, lights, etc.
(5) Circuits cannot be wired in parallel to operate the same device.
(6) Height is to top of case. Add 7.4 in. (187mm) to top of exhaust elbow.
ENGINE SPECIFICATIONS
Product
Name
Horsepower &
Displacement
Operating
Speeds
Fuel
Consumption
Description
Capacities
Perkins® 404D-22 (7)
4 Cylinder, 4 Cycle
Water-Cooled Diesel Engine,
12V Electric Start,
Dry Type Air Cleaner,
Fuel Filter with Water Separator
32.7 HP@1800 RPM
FUEL:
15 gals (57 ltrs)
400A Load
1800 RPM
1.2 Gal/Hr
4.4 Ltr/Hr
EPA Tier 4i
136 cu. in.
(2.2 ltrs)
OIL:
8.5 qts (8.0 ltrs)
High Idle
1880 RPM
0.4 Gal/Hr
1.5 Ltr/Hr
RADIATOR COOLANT:
8.0 qts (7.6 ltrs)
Low Idle
1400 RPM
0.3 Gal/Hr
1.1 Ltr/Hr
(7) Perkins® warranty is 2 years/2,000 hours, all non-electric components, 3 years major non-electric components. See warranty for details.
Vantage® 400
[4]
Download from Www.Somanuals.com. All Manuals Search And Download.
A CLOSER LOOK
SYSTEM SELECTION
®
One-Pak Welding Packages
®
Order a Lincoln One-Pak and get everything you need to
complete a welding package - all with one order number.
®
(One-Pak Packages require assembly.)
Each UNASSEMBLED Package Contains:
®
• Vantage 400 (See Order Number Below)
• Medium Welder Trailer (K2636-1)
• Duo-Hitch™ 2" Ball/Lunette Eye Hitch (included)
• Fender and Light Kit (K2639-1)
Vantage® 400
• Cable Rack (K2640-1)
K2636-1 Medium Welder Trailer
• Cable Connectors - two (K2487-1)
• Electrode Cable 3/0, two 50 ft. (15.3 m) lengths (K2485-3)
• Electrode Cable 3/0, 10 ft. (3 m) (K2483-3)
• Work Cable 3/0, 50 ft. (15.3 m) (K2484-3)
• 400A Electrode Holder (K909-8)
• 500A Work Clamp (K910-2)
Order:
®
®
K2508-3 Vantage 400 One-Pak Package
Duo-Hitch™ 2" Ball/Lunette Eye Hitch
(included)
K2640-1 Cable Rack
®
Ready-Pak Welding Packages
®
Order a Lincoln Ready-Pak Package and get an assembled welding package.
Each COMPLETELY ASSEMBLED Package Contains:
®
• Vantage 400 (See Order Number Below)
• Medium Welder Trailer (K2636-1)
• Duo-Hitch™ 2" Ball/Lunette Eye Hitch (included)
• Fender and Light Kit (K2639-1)
• Cable Rack (K2640-1)
• Cable Connectors - two (K2487-1)
• Electrode Cable 3/0, two 50 ft. (15.3 m) lengths (K2485-3)
• Electrode Cable 3/0, 10 ft. (3 m) (K2483-3)
• Work Cable 3/0, 50 ft. (15.3 m) (K2484-3)
• 400A Electrode Holder (K909-8)
• 500A Work Clamp (K910-2)
Order:
®
®
K2509-3 Vantage 400 Ready-Pak Package
Completely Assembled Ready-Pak® Pkg.
Vantage® 400
[5]
Download from Www.Somanuals.com. All Manuals Search And Download.
RECOMMENDED OPTIONS
GENERAL OPTIONS
Spark Arrestor Kit
Mounts to Muffler Exhust Tube.
Virtually eliminates spark emissions.
Order K903-1
Power Plug Kit (20A)
Provides four 120V plugs rated at
20 amps each, and one dual volt-
age, full KVA 1-phase plug rated
at 120/ 240V, 50 amps. 120V plug
may not be compatible with com-
mon household receptacles.
Order K802N
120V
Service Indicator Kit
Provides a GO/NO-GO visual indica-
tion of air cleaner element useful
service life. Filter service based on
restriction readings allows the longest
life possible from the filter and best
engine protection.
Power Plug Kit (15A)
Provides four 120V plugs rated at
15 amps each, and one dual volt-
age, full KVA 1-phase plug rated
at 120/ 240V, 50 amps. 120V plug
is compatible with common house-
hold receptacles.
Order K1858-1
120V
Cold Weather Heater and Tarp Kit
For engine starting and operation in
extreme cold weather conditions
down to -40°F(-40°C) (with the use of
0W40 synthetic oil and arctic diesel
fuel). Includes 120V AC oil pan heater,
120V AC engine block heater, and
radiator grill tarp.
Order K802R
Full-KVA Power Plug (1-Phase)
One dual voltage plug rated at
120/240V, 50 amps. NEMA 14-50P.
Order T12153-9
Order K2679-1
Full-KVA Power Plug (3-Phase)
One plug rated at 240V, 50 amps.
NEMA 15-50P.
STICK OPTIONS
Accessory Kit
Order T12153-10
Includes 35 ft. (10.7 m) 2/0 electrode
cable with lug, 30 ft. (9.1 m) 2/0 work
cable with lugs, headshield, filter
plate, cover plate, work clamp and
electrode holder. 400 amp capacity.
Order K704
Medium Welder Trailer
For heavy-duty road, off-road, plant
and yard use. Includes pivoting jack
stand, safety chains, and 13"
wheels. Stiff .120" welded rectan-
gular steel tube frame construction
is phosphate etched and powder
coat painted for superior rust and
corrosion resistance. Low sway
suspension gives outstanding sta-
bility with manageable tongue
weight. Wheel bearings are packed
with high viscosity, high pressure,
low washout Lubriplate® grease.
Includes a Duo-Hitch™ – a 2"
Ball/Lunette Eye combination
hitch. Overall width 60".
Remote Output Control
Consists of a control box with choice
of two cable lengths. Permits remote
adjustment of output.
Order K857 for 25 ft. (7.6 m)
K857-1 for 100 ft. (30.5 m)
TIG OPTIONS
Pro-Torch® PTA-26V TIG Torch
Air-cooled 200 amp torch (2 piece)
equipped with valve for gas flow
control. 25 ft. (7.6 m) length.
Order K1783-9
Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Rack
Magnum® Parts Kit for PTA-26V
TIG Torch
Four-Wheeled Steerable
Magnum® Parts Kit provides all the
torch accessories you need to start
welding. Parts kit provides collets,
collet bodies, a back cap, alumina
nozzles and tungstens in a variety of
sizes, all packaged in an easy to carry
reclosable sack.
Yard Trailer
For off-road, plant and yard use.
Includes an automatically engaging
drawbar lock when the drawbar is
raised to the verticle position. 13"
wheels. Wheel bearings are packed
with high viscosity, high pressure,
low washout Lubriplate® grease.
Stiff 3/16" welded rectangular steel
frame construction is phosphate
etched and powder-coat painted
for superior rust and corrosion
resistance. Also includes a
Duo-Hitch™ – a 2" Ball/ Lunette
Eye combination hitch. Overall
width: 55".
Order KP509
Foot Amptrol®
Provides 25 ft. (7.6 m) of remote out-
put control for TIG welding. (6-pin
plug connection).
Order K870
Order K2641-2
Vantage® 400
[6]
Download from Www.Somanuals.com. All Manuals Search And Download.
RECOMMENDED OPTIONS
Hand Amptrol®
Drive Roll and Guide Tube Kit
(for LN-25 PRO)
For .035" and .045" (0.9-1.1 mm) solid
steel wire.
Provides 25 ft. (7.6 m) of remote
current control for TIG welding.
(6-pin plug connection). Velcro
straps secure torch.
Order KP1696-1
Order K963-3 (one size fits all
Pro-Torch® TIG Torches)
LN-23P Wire Feeder
Portable CV unit for Innershield pipe
welding. Includes drive rolls and guide
tubes. Requires K2393-1 or -2 Input
Cable Assembly and Magnum®
Innershield® Gun.
Precision TIG® 225
Ready-Pak® Pkg.
For AC TIG Welding with square
wave performance, use the AC gen-
erator of the engine-driven welder
to supply the power (Full rated
output may not be available). Easy
setup. Includes torch, Foot Amptrol®
and Gas Regulator & Hose. Requires
the K1816-1 Full KVA Adapter Kit.
Order K2535-1
Order K316L-2
Input Cable Assembly for LN-23P
8-socket to 14-pin control cable with
lugged electrode cable for K316L-2
LN-23P Wire Feeder.
Order:
K2393-1 25 ft (7.6 m)
Invertec® V205-T AC/DC
One-Pak® Package
K2393-2 75 ft (22.9 m)
Magnum® 350 Innershield® Gun
(for LN-23P)
Rated 350 amps, 60% duty cycle. For
.068"-5/64" (1.7-2.0 mm) Innershield®
wire and includes reduced speed
switch.
For AC TIG welding with square
wave performance, use the AC
generator of the engine-driven
welder to supply the power. Easy
setup. Includes torch, parts kit,
regulator and hose kit, Twist-Mate™
torch adapter, work cable with
Twist-Mate end and foot Amptrol®.
Requires K1816-1 Full-KVA Adapter
Kit.
Order K345-10
Magnum® SG Spool Gun
Hand held semiautomatic wire feeder.
Requires SG Control Module and Input
Cable.
Order K2350-2
Full - KVA Adapter Kit (1-Phase)
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA 6-
50P) to the full-KVA receptacle on
Lincoln engine-driven welders.
Order K1816-1
Order K487-25
SG Control Module
The interface between the power
source and the spool gun. Provides
control of the wire speed and gas flow.
For use with a spool gun.
Order K488
WIRE FEEDER OPTIONS
LN-25 PRO Wire Feeder
Input Cable
Portable CC/CV unit for flux-cored
and MIG welding with MAXTRAC®
wire drive system. Includes gas sole-
noid and internal contactor
Order K2613-1
(For SG Control Module)
For Lincoln engine power sources with
14-pin MS-type connection, separate
115V NEMA receptacles and output
stud connections.
Order K691-10
Magnum® 350 Innershield Gun
(for LN-25 PRO)
For self-shielded wire with 15 ft.
(4.5 m) cable. For .062"-3/32"
(1.6-2.4 mm) wire.
PLASMA CUTTING
Pro-Cut® 55
Cuts metal using the AC generator
power from the engine-driven welder.
Accepts 3-phase or 1-phase input
power. Requires the K1816-1 Full KVA
adapter kit, if connected for 1-phase
input power.
Order K126-2
Drive Roll and Guide Tube Kit
(for LN-25 PRO)
For cored or solid steel wire.
Order KP1697-068
for .068"-.072" (1.8 mm)
KP1697-5/64
for 5/64" (2.0 mm)
Order K1580-1
Full-KVA Adapter Kit (1-Phase)
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA 6-50P)
to the full-KVA receptacle on Lincoln
engine-driven welders.
Magnum® 300 MIG Gun
For .035"-.045" (0.9-1.2 mm) gas-
shielded wire with 15 ft. (4.5 m)
cable.
LN-25 PRO Order:
K1802-1 (Includes Connector Kit)
Order K1816-1
Vantage® 400
[7]
Download from Www.Somanuals.com. All Manuals Search And Download.
®
VANTAGE 400 ORDER FORM
PRODUCT DESCRIPTION
ORDER NUMBER
QUANTITY
PRICE
®
VANTAGE 400
K2410-2
K2508-3
K2509-3
®
®
VANTAGE 400 ONE-PAK PKG.
®
®
VANTAGE 400 READY-PAK PKG.
RECOMMENDED GENERAL OPTIONS
Power Plug Kit - 20 amp
K802N
Power Plug Kit - 15 amp
K802R
Full-KVA Power Plug (1-Phase)
Full-KVA Power Plug (3-Phase)
T12153-9
T12153-10
K2636-1
K2639-1
K2640-1
K2641-2
Medium Welder Trailer with Duo-Hitch™ 2" Ball/Lunette Eye Hitch
- Fender and Light Kit
- Cable Rack
Four-Wheeled Steerable Yard Trailer
(with Duo-Hitch™: 2" Ball/Lunette Eye Hitch)
Spark Arrestor Kit
K903-1
Service Indicator Kit
Cold Weather Heater & Tarp Kit
K1858-1
K2679-1
RECOMMENDED STICK OPTIONS
Accessory Kit
K704
Remote Output Control
- 25 ft. (7.6m)
K857
- 100 ft. (30.5m)
K857-1
RECOMMENDED TIG OPTIONS
®
Pro-Torch PTA-26V TIG Torch
K1783-9
KP509
K870
K963-3
K2535-1
K2350-2
K1816-1
®
Magnum Parts Kit For PTA-26V TIG Torch
Foot Amptrol
Hand Amptrol (All Pro-Torch TIG torches)
Precision TIG 225 Ready-Pak Pkg. (for AC TIG Welding)
Invertec V205-T AC/DC One-Pak Pkg. (for AC TIG welding)
- Full KVA Adapter Kit (required for K2535-1 and K2350-1)
®
®
®
®
®
®
®
RECOMMENDED WIRE FEEDER OPTIONS
LN-25 PRO Wire Feeder
Magnum 350 Innershield Gun
K2613-1
K126-2
®
®
Drive Roll and Guide Tube Kit .068"-.072" (for LN-25 PRO)
Drive Roll and Guide Tube Kit 5/64" (for LN-25 PRO)
Magnum 300 MIG Gun (for LN-25 PRO) (includes Connector Kit)
Drive Roll and Guide Tube Kit (for LN-25 PRO)
LN-23P Wire Feeder
KP1697-068
KP1697-5/64
K1802-1
KP1696-1
K316L-2
K2393-1
K2393-2
K345-10
K487-25
K488
®
- Input Cable Assembly, 25 ft. (7.6 m)
- Input Cable Assembly, 50 ft. (15.2 m)
®
®
Magnum 350 Innershield Welding Gun
®
®
Magnum SG Spool Gun
- SG Control Module (required)
- Input Cable (required)
K691-10
RECOMMENDED PLASMA CUTTING OPTIONS
®
Pro-Cut 55
K1580-1
K1816-1
- Full KVA Adapter Kit (required for 1-phase input power)
TOTAL:
C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company® is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of
our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to
inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not
in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume
any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or
implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is
specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
®
THE LINCOLN ELECTRIC COMPANY
Download from Www.Somanuals.com. All Manuals Search And Download.
|