ENVIRONMENTAL SYSTEMS
™
Mobiflex 200-M
Input
1
PHASE
Mobile Welding Fume Extractor
Lincoln Electric’s® Mobiflex™ 200-M is a portable, low vacuum/high volume disposable
60
Hz
filtration system designed for medium duty extraction and filtration of welding fumes.
The lightweight and rugged design of the Mobiflex™ 200-M along with the standard front
caster and rear wheels allows for easy portability. It is ideal for facilities that require welding
fume extraction in multiple locations, including maintenance departments, general fabrication
and job shops, and industrial welding environments.
The Mobiflex™ 200-M can be configured with Lincoln’s® LFA 3.1 or LFA 4.1 fume extraction
arms or with the 152 mm (6 in.) diameter, 5 m (16 ft.) long flexible hose and hood set.
Lincoln Electric’s® fume extraction arms are designed to provide welders optimal
motion and reach for their specific welding position(s) and work area.
The arm lengths range from 3.1 meter (10 ft.) to 4.1 meters (13 ft.).
For hard to reach areas such as confined spaces, the flexible hose
and set can be easily carried to locations where an extraction
arm just is not feasible.
The Mobiflex™ 200-M has an on-board internal extraction fan and
is designed specifically for weld applications. It extracts weld fume
through the arm, into the internal spark arrestor and finally through
the unique LongLife® filter cartridge capturing the welding fume
particulate. The particulate is collected on the inside of the cartridge,
minimizing exposure to particulate during filter maintenance and
disposal.
The Mobiflex™ 200-M filter system is recommended for consumable use of approximately
1500 lbs. (680 kg) of MIG wire or 1100 lbs. (500 kg) of stick and flux-cored wire before
replacing.
Shown:
Mobiflex™ 200-M with
optional Extraction Arm
Filter performance will be affected by process and application variables including:
base metal(s), consumables(s), and coatings (oil) if applicable.
Processes
Stick, TIG, MIG, Flux-Cored
Advantage Lincoln
• Generous 735 CFM airflow with LFA 3.1/4.1 extraction arm.(1)
• Filter efficiency up to 99%(2)
• 50 m2 (164 ft2) LongLife® filter with ExtraCoat® pretreatment.
Mobiflex™ 200-M System includes:
.
• Filter, plastic housing, 8" flexible hose, 6 meter (19ft.) 115VAC input
power cord and instruction manual.
• Pressure differential filter indicator gauges amount of particulate in
filter cartridge, indicating system maintenance and filter replacement.
• Internal aluminum mesh spark arrestor.
• One-year warranty on equipment; 30 days on filter cartridge.
• Low noise operation: 69dBA.
NOTE: Extraction Arm of your choice is required.
(1)
CFM level is dependent upon arm length, fan type and system maintenance.
(2)
Per Din EN 60335-2-69 Standards.
TECHNICAL SPECIFICATIONS
Dimensions
H x W x D
mm (in.)
Product
Name
Product
Number
Filter Type/
Filter Size
Input
Power
Input
Current
Net Weight
kg (lbs.)
Mobiflex™ 200-M
Base Unit
K1653-2
Pretreated Cellulose
115/1/60
12A
900 x 810 x 1210
(36 x 32 x 48)
111
(243)
2
2
50 m (164 ft )
Publication E13.12 2/07
Web Update 5/08
Download from Www.Somanuals.com. All Manuals Search And Download.
RECOMMENDED OPTIONS
GENERAL OPTIONS
LFA 3.1 (10 ft.) and LFA 4.1
(13 ft.) Extraction Arm
Extraction arms with 360° rotat-
able hood, airflow throttle valve,
extraction focus spoiler, and han-
dle for every positioning. Hood
lamp and automatic start/stop
models available.
Order:
K2633-1 LFA 3.1
LFA 3.1 with lamp/arc sensor
K2633-2
K2633-3 LFA 4.1
Starter Overload Switch
for 230V
This overload switch retrofits the
extraction unit for 230V operation.
Order K1494-3
®
LongLife 200-M Filter
Standard replacement LongLife®
filter with ExtraCoat® treatment
that provides a 99.8% filter effi-
ciency.
LFA 4.1 with lamp/arc sensor
K2633-4
Order K1673-1
Hose and Hood Set
Completely flexible extraction
hose with magnetic hood set.
Ideal for those hard to access
fume extraction applications.
Comes with 152 mm (6") diameter
hose and reinforced outside steel
rings to protect against wear and
crushing.
Activated Carbon Filter
Mounts over LongLife® 200-M
Filter and is recommended to
neutralize welding fume odors.
Order K1852-1
Order K1668-1
Lamp Kit with Arc Sensor
To conserve energy and extend
the life of your system, order the
lamp kit with arc sensor. It senses
an arc while the lamp illuminates
the work area. The arc sensor
turns on the unit when it senses
an arc flash and automatically
turns off 20 seconds after the arc
goes out. Also includes a manual
override on/off switch that works
independently of the arc sensor.
Kit includes work lamp with arc
sensor housing, switch bank,
and wiring.
Order K1706-2
Consult your local Lincoln Representative to help you decide which options are right for you!
Mobiflex™ 200-M
[3]
Download from Www.Somanuals.com. All Manuals Search And Download.
™
MOBIFLEX 200-M ORDER FORM
PRODUCT DESCRIPTION
QUANTITY
PRICE
ORDER NUMBER
™
Mobilflex 200-M Base Unit
K1653-2
Choose an Extraction Arm or Hose
LFA 3.1 – 10 ft. Extraction Arm
K2633-1
LFA 3.1 – 10 ft. Extraction Arm with Lamp/Arc Sensor
LFA 4.1 – 13 ft. Extraction Arm
LFA 4.1 – 13 ft. Extraction Arm with Lamp/Arc Sensor
Hose and Hood Set, 5 meter (16 ft.)
K2633-2
K2633-3
K2633-4
K1668-1
Options
Lamp Kit with Arc Sensor
Starter Overload Switch for 230V
K1706-2
K1494-3
Filter Options
LongLife® 200-M Filter
Active Carbon Filter
K1673-1
K1852-1
TOTAL:
Environmental Systems Family
High & Low
Vacuum Solutions
C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company® is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of
our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to
inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not
in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume
any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or
implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is
specifically disclaimed.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
®
THE LINCOLN ELECTRIC COMPANY
Download from Www.Somanuals.com. All Manuals Search And Download.
|