Lightolier Work Light C4T4VM User Manual

Calculite® HID Downlight C4T4VM  
Page 1 of 2  
4 1/2Aperture, 2pc Vertical, T4.5 Medium Beam  
Ceiling Cutout: 5 1/8” (130 mm) Dia.  
Reflector Trim  
Frame-In Kit  
Lamp  
C420T4E1  
C420T4E2  
C439T4E1  
C439T4E2  
C470T4E1  
C470T4E2  
Electronic 120V  
20W T4.5  
20W T4.5  
39W T4.5  
39W T4.5  
70W T4.5  
70W T4.5  
Ceramic Metal Halide  
Ceramic Metal Halide  
Ceramic Metal Halide  
Ceramic Metal Halide  
Ceramic Metal Halide  
Ceramic Metal Halide  
C4T4VM CLW  
Specular Clear, White Painted Flange.  
Electronic 277V  
Electronic 120V  
Electronic 277V  
Electronic 120V  
Electronic 277V  
CLP  
Specular Clear, Matching Flange.  
CCDW  
Comfort Clear Diffuse, White Painted Flange.  
Comfort Clear Diffuse, Matching Flange.  
Champagne Bronze, White Painted Flange.  
Champagne Bronze, Matching Flange.  
CCDP  
CCZW  
CCZP  
Features  
Electrical  
1. Upper Reflector: Clear anodized aluminum, 0.040” (16-ga.). Provides medi-  
um beam optics ideal for general lighting. Also available in narrow and wide  
beam, see C4T4VN and C4T4VW specification sheets.  
Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high power  
factor, T.H.D. <15%, thermally and transient protected, RMI/RFI complies with  
FCC Part 18 non-consumer limits, shut-down circuit at end of lamp life, sound  
rating “A, -5°F minimum starting temperature, Type 1 Outdoor rating.  
2. Aperture Cone: Provides 50° visual cut-off to lamp and lamp image; self-  
flange in painted white or aperture-matching polished flange. Consult factory  
for other finishes.  
3. Lamp Shield: High-temperature glass as required by code, captive during  
re-lamping. Light diffusion provides exceptionally smooth beam.  
4. Socket Housing: Galvanized steel, pre-wired with G8.5 pulse rated socket.  
Snaps onto upper reflector for secure attachment without tools; unitized  
construction assures proper lamp alignment to optics for consistent  
performance.  
Ballast  
ANSI Code Voltage Max. Amps Input Watts  
20W MH M156  
39W MH M130  
70W MH M139  
120/277 0.21/0.10  
120/277 0.39/0.17  
120/277 0.67/0.29  
23  
44  
78  
Options and Accessories  
Slope Ceiling Adapters: See Specification Sheet SCA.  
Chicago Plenum: Consult Factory..  
5. Mounting Frame: 0.048" (18-ga.) galvanized steel. Vertical adjustment  
mechanism accommodates mounting to virtually any ceiling system using  
mounting bars (provided, or 1/2" EMT tubing (by others). Single locking  
feature secures all adjustments. Alignment holes and markings allow  
fixture to be preset prior to installation.  
6. Mounting Ring: 0.048"(18-ga.) galvanized steel. Designed for vertical  
adjustment from above or below for ceilings from 0" to 2" thick. Center-line  
notches allow consistent alignment of multiple fixtures.  
Labels  
UL (Suitable for Damp Locations), CSA, I.B.E.W.  
For 70W, install fixtures with minimum spacing between:  
1. Center-to center of adjacent luminaries: 2 feet.  
2. Top of luminaire to overhead building member: 1/2 inch.  
3. Luminaire center to side building member: 1 foot.  
7. Mounting Bars: 0.048" (18-ga.) pre-installed, telescoping bars extend to 30"  
long and lock securely into position. Built-in locking tabs provide positive  
attachment to common T-bar systems. Self-centering feature simplifies  
installation in 24" O.C. grid systems. Attaches to steel or wood joists without  
accessories.  
Job Information  
Type:  
Job Name:  
Cat. No.:  
8. Trim Retention Springs: Rust resistant springs secure reflector/housing for  
quick, tool-less installation.  
Lamp(s):  
Notes:  
9. Ballast /Socket Housing/Cover Assembly: Snaps onto junction box with-  
out tools for inspection and ballast replacement, accessible from below.  
10. Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,  
90°C through branch circuit conductors. Allows inspection from below.  
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not  
install insulation above nor within 3" (76mm) of any part of the luminaire.  
Lightolier a Genlyte Thomas Company  
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710  
We reserve the right to change details of design, materials and finish.  
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Leupold Oven PS536GS User Manual
LG Electronics TV Antenna 32 37 42 47 55LD6 User Manual
Life Fitness Heart Rate Monitor 95Le 95Li User Manual
Life Fitness Treadmill M051 00K60 A093 User Manual
Linksys Network Card USB1000 User Manual
Makita Cordless Drill 6311D User Manual
Makita Power Hammer HR2400 User Manual
Mellerware Hot Beverage Maker 223457 User Manual
Metra Electronics Automobile Accessories 99 3100 User Manual
Metra Electronics Automobile Accessories 99 5026 User Manual