Lytecaster® Recessed Downlighting 1102T
Page 1 of 1
Fluorescent Frame-In Kit 6 3/4” Aperture Low Profile 2 Lt.
6
2
3
1
15 11/16”
3 7/8”
9”
3 13/16”
4
5
Ceiling Opening
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit
Ballast
Voltage
Lamp Type
Electrical
Input Wattage Input Current
1102T1
1102TH1
1102TH2
1102TH1R (Remodel)*
1102T13U
NPF Magnetic
HPF Magnetic
HPF Magnetic
HPF Magnetic
HPF Electronic
HPF Electronic
HPF Electronic
120V
120V
277V
120V
120V/277V
120V/277V
120V/277V
2 Pin (Gx23)
2 Pin (Gx23)
2 Pin (Gx23)
2 Pin (Gx23)
4 Pin (G24q-1)
4 Pin (G24q-2)
4 Pin (G24q-3)
13W Twin Tube
13W Twin Tube
13W Twin Tube
13W Twin Tube
13W Quad Tube
18W Quad Tube
26W Quad Tube
35W
32W
32W
31W
33W
40W
56W
.600A
.280A
.160A
.280A
.28/.12A
.34/.15A
.47/.21A
1102T18U
1102T26U
Reflector Trims — See Individual Reflector Trim Specification Sheets
Alzak® Cone
Step Baffle
Cross Blade
Fresnel Lens
Enclosed Diffuser
Wall Washer
1113TGD
1113TCL
1105T
1105TWH
1132T
1126T
1128T
1178T
1135T
1135TWH
Features
Options and Accessories
Plaster Ceiling Ring:
1. Mounting Frame: #20 ga. galvanized steel. Accommodates ceiling up to 1”
thick. Push-in/twist-out rotoclips hold reflector flush to ceiling.
2. Junction Box: #14 ga. galvanized steel. Rated for 8 #12 AWM through
branch circuit wires suitable for 90° C, for end of run 75° C. Quick release
“L” shaped cover for access to wiring. Integral cable clamps permit attach-
ment of non-metallic Romex® or armored cable without the need for separate
connectors.
1961 - 7/8” depth for wet plaster ceiling.
Remodeler Anchor Clip:
1985S
Labels
UL (Suitable for Damp Locations), I.B.E.W.
3. Mounting Bars: Die-formed steel, 16 ga. Four bars, 13” long, extend to
27”, permit off-center mounting; bars rotate 90° and lock in both directions;
integral nailer for wood joists, locking tabs for T-bar runners.
4. Socket Housing: 22 ga. galvanized spring steel; snap-in quick assembly for
precise lamp location.
5. Socket: Molded thermoplastic; prewired with #18 AWM leads to 4” X 3
1/2” X 2” junction box.
6. Thermally Protected Ballast: Single 2 lamp magnetic or universal voltage
electronic, Class-P Rated. Insulation must be kept 3” away from fixture sides
and wiring compartment and must not be placed above fixture as to entrap
heat.
Romex® is a registered trademark of General Cable Industries Inc.
US Patent Nos.: 5,045,985; 4,327,403 and patents pending
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0506
Download from Www.Somanuals.com. All Manuals Search And Download.
|