Lightolier Indoor Furnishings 1050DRN User Manual

Lensed Recessed CFL Downlighting  
5" Round, 1 Lt., CFL, Low-Profile IC Airseal® Energy Star® Dimming FIK  
1050DRN  
Page 1 of 1  
14"  
Overall Length  
Height = 3 1/2"  
Aperture Opening = 5 5/16" Diameter  
Top View  
11 5/8"  
Overall Length  
2
5
8 5/16"  
1
4
8 1/4"  
Overall Width  
13" Min  
24" Max  
3
2
Frame-In-Kit  
6,7  
Reflector Trim  
Complete Fixture consists of Frame-In Kit and Reflector Trim. Select each separately.  
Xceed Compact Fluorescent Lensed Round Reflector Trims  
Xceed Frame-In Kit  
Lensed Downlight  
Lensed Slope/Wall Wash  
1050DRN26ES*  
(Energy Star® - 120v)  
26w Triple  
GX24q-3 Base  
120v - 0.23 amp max  
1050RNDLWB  
1050RNDLCDW  
1050RNDLCDP  
1050RNDLWDW  
1050RNDLWDP  
1050RNSLWWB  
1050RNSLWCDW  
1050RNSLWCDP  
1050RNSLWWDW  
1050RNSLWWDP  
T24  
2005  
* All frames come standard with preset mounting screws and a 2700K lamp. Models are available with preset nails and/or a 3500K  
lamp. Simply add an N and/or 35 to the end of the model number for those options.  
Features  
Recommended Dimmers (Neutral Required)  
1. Housing: .026" (#23ga.) galvanized steel. UL listed for direct contact with  
thermal insulation. AirSeal® housing minimizes air leakage to less than 2  
CFM at 1.57 PSF (or 75Pa), which complies with Title 24, the International  
Energy Conservation Code, and Washington State Energy Code (Section  
502.4). This reduces heat loss and condensation in ceiling. Access door for  
inspection of junction box.  
ITSEBAU: IntelliSight Occupancy Dimmer for AmbiStar Ballasts  
OS600EBA: Onset Wall Box Dimmer 600VA for AmbiStar Ballasts  
MSP600EBA: MultiSet Pro Dimmer 600VA for AmbiStar Ballasts  
Please add the following letters to part number for color option:  
W = White I = Ivory LA = Light Almond  
Recommended Lamping  
2. Lower Frame and Top Cover: .026” (#23 ga.) galvanized steel.  
Accommodates ceilings up to 1 1/2" thick. 3/8" deep integral lip with four  
notches at 90 degrees apart to simplify alignment. Locks into position along  
length of mounting bars with locking screws. Indicator lines on housing top  
and sides to simplify alignment.  
Lightolier recommends the following Philips lamps:  
943272: PLT 26W – 2700K = PHILIPS #38440-4  
943273: PLT 26W – 3500K = PHILIPS #26824-3  
3. Junction Box: 2.5" X 5 3/8" X 2" (27 cu. in) .032" (#21 ga.) galvanized steel.  
UL listed 90°C supply conductors. Rated for branch circuit wiring supplying  
connected luminaires (daisy chaining).  
Labels  
cULus Listed (Type I.C., Suitable for Damp Location), Complies with Air Leakage  
Requirements stated in the Title 24, the International Energy Conservation  
code and Washington State Energy Code. AirSeal® is a registered trademark of  
Lightolier.  
4. Mounting Bars: .059" (#16 ga.) galvanized steel. Bars pivot for easy  
attachment and wire-in below ceiling line. Bars extend to accommodate 16"  
to 24" O.C. joist spacing. Bars can accommodate 12" O.C. Joist spacing after a  
slight field modification (see Instruction Sheet). Features integral self tapping  
phillips/square drive SCREWS for secure attachment to wood or metal  
construction. Also available with integral NAILS. Attaches to T-bar ceilings  
without the need of accessories. Bars installed on shortest dimension of  
frame, but can be easily repositioned 90 degrees from original position.  
5. Ballast: Mounted inside Junction Box. 120V NPF Energy Star® approved  
Electronic Ballast. Instant start with end of lamp life protection, class “P”  
thermal protection with a class “A” sound rating. Ballast easily accessible  
for inspection.  
Job Information  
Type:  
Job Name:  
Cat. No.:  
Lamp(s):  
Notes:  
6. Socket: NEW TWIST & LOCK Four-pin base, molded thermoplastic socket,  
prewired with No. 18 AWM leads to ballast.  
7. Socket Bracket: .048" (#18ga.) Galvanized Steel. Designed to be easily  
adjusted to accommodate 3/8" to 1 1/2" ceiling thickness. Three positions  
available for any installation orientation of Wall Washers Slope ceiling, or  
Wall mount application. Ensures Unitized optics. Reflector trim is secured to  
upper portion of socket bracket to ensure a tight to ceiling installation.  
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710  
We reserve the right to change details of design, materials and finish.  
Lightolier is a Philips group brand  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KTM Motorcycle 3CF8403H0EN User Manual
Laser Digital Camera AO EZCAMEL T User Manual
Lenovo Laptop E430 User Manual
Liebert Refrigerator 1800 User Manual
Lindy Network Card 70586 User Manual
LST Smoke Alarm MM 55000 833 User Manual
Makita Cordless Drill 6011D User Manual
Maytag Microwave Oven W10315181A User Manual
MB QUART Car Speaker FKS116 User Manual
Meyer Sound Speaker M3D User Manual