Life Fitness Service Kit Instruction (GK61-00002-0008)
HOW TO... REPLACE ROCKER ARMS
Tools required: Snap ring pliers, 3/8 Socket set, and Standard wrench set
Step 1
Unplug the unit at the electrical outlet.
Step 2
End Ca p
Torque
Roc ke r Arm s
Raise the boot covers on the upper arms then remove
three mounting bolts from each upper arm.
30-35 FT. LBS.
Step 3
Bolts(2)
If equipped, remove the clevis covers.
Step 4
Remove the nut and bolt securing the PEDAL LEVER to
the ROCKER ARM, and lower the pedal lever.
Step 5
Pe da l Le ve r
Remove the END CAP and internal snap from the rocker
arm.
Step 6
Remove the rocker arm.
Step 7
Install the new rocker
arm in reverse order.
Sna p
Ring
NOTE: For units
Fla t Wa she rs
Sna p
without clevis covers,
plug the square holes
in the bottom of the
rocker arms with the
supplied plugs.
Ring
NOTE: For units with
clevis covers, insert
the nylon grommets
(nuts) as supplied,
then install clevis
covers.
Wa ve
Wa she r
Roc ke r Arm
Inse rt Plug or Nylon Grom m e t
into squa re ope ning
M051-00K61-A022
Download from Www.Somanuals.com. All Manuals Search And Download.
|