824 LEG CURL/EXT ATTACHMENT
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
USER’S GUIDE
CLASS H
1
Version: 824108
PART # 7304701
REV.A
Revision: 06/19/02
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTES
Please note:
* Thank you for purchasing the ParaBody 824 Gym Attachment. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
Tools Required forAssembly
* Ratchet, 3/4 socket or wrench
* Adjustable wrench
* Rubber mallet or hammer
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OFTHE HEAD OFTHE BOLT.
BOLT LENGTH
BOLT LENGTH RULER:
1/2
1/2
1/2
1/2
1/2
1/2
0
1
2
3
3
4
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART #
3114401
3235501
6020601
3105401
6236701
3104301
QTY
KEY
7
DESCRIPTION
1/2” FLATWASHER
1/2” LOW HT LOCK NUT
1/2” FLANGE BEARING
3/4” STAR LOCK
QTY
KEY
PART #
DESCRIPTION
LEA
1
1
2
1
6
1
2
1
2
6
4
1
1
2
3
4
5
6
6416410
LEG EXTENSION
LEA
8
LEA 6416310 LEG EXTENSION NECK
LEA
LEA
LEA
9
6125101
6406501
6194601
3235312
ROLLER PAD SHAFT
U-PIN
10
11
12
LEA
LEA
LEA
LEA
ROLLER PAD
1/2 X 3” BOLT
1-3/4” SQ. END CAP
3/4” SQ. RUBBER BUMPER
LEA
LEA
6
7
8
9
10
1
5
3
2
11
4
12
PIN STOP
U-PIN
UPRIGHT TUBE,
BENCH FRAME
FIGURE 1
DETAIL A
REFER TO FIGURE 1 WHILE READINGASSEMBLY INSTRUCTIONS
* Insert one 1-3/4” END CAP (11) into the top of the LET EXTENSION NECK (2).
* Slide two ROLLER PADS (5) over each end of the shaft on the LEG EXTENSION NECK (2)
and hold in place using two STARLOCK COLLARS (10)
* Insert three 1-3/4” END CAP (11) into the ends of the LEG EXTENSION (1)
* Insert two 1/2” FLANGE BEARING (9) into the bushing on the LEG EXTENSION (1)
*Assemble the LEG EXTENSION NECK (2) to the LEG EXTENSION (1) using one 1/2 X 3” BOLT (6),
two 1/2” FLAT WASHERS (7) and one 1/2” LOCK NUT (8). (TIGHTEN THE CONNECTION ENOUGH
TO REMOVE THE PLAY, YETALLOWINGTHE LEGEXTENSION TO ROTATE FREELY)
*Assemble four ROLLER PAD (5) to the LET EXTENSION (1) using two ROLLER PAD SHAFT (3) and four
STARLOCK COLLAR (10)
*Attach one 3/4” RUBBER BUMPER (12) to the LEG EXTENSION (1) approximately as shown
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTIONS FOR ATTACHMENT OPERATION
* To perform LEG CURLS or LEG EXTENSION, insert the LEG EXTENSIONASSEMBLYinto the upright tube
of the BENCH FRAME and tighten in place using the THUMBSCREW. To adjust the SEAT PAD for the LEG
EXTENSION position, pull out on the U-PIN. Rotate the U-PIN back pass the first PIN STOP. Release the
U-PIN and allow it to rest up against the first PIN STOP.
* To perform DECLINES orAB CRUNCHES, loosen the thumbscrew and pull up the LEG EXTENSION
ASSEMBLYuntil the hole in the LEG EXTENSION NECK is exposed. Insert the U-PIN through the hole
in the NECK and the BUSHING on the LEG EXTENSION (AT THE SAME TIME). Allow the U-PIN
to rest on top of the UPRIGHT TUB. Retighten the THUMBSCREW. To adjust the SEAT PAD for the
DECLINE position, rotate the U-PIN back to the SECOND PIN STOP.
* When U-PIN is not in use, insert it through the BUSHING of the LEG EXTENSION and position it behind the
WASHER on the WEIGHT PEG of the LEG EXTENSION. (SEE DETAILA).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Please note:
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your ParaBody customer service representative
at (800) 328-9714.
* Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.
Failure to do so may result in serious injury
* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT
YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION.
REMEMBER TO FILL OUT YOUR WARRANTY REGISTRATION CARD AND
MAIL BACK.
MODEL #________________________
SERIAL #_________________________
DATE OF PURCHASE: _____________
DEALERS NAME: _________________
DEALERS PHONE #_______________
SERIALNUMBER LOCATION
Thank you for purchasing the ParaBody 824Attachment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY.
1. LIMITED WARRANTY ON FRAMEAND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired
or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
2. LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, ParaBody will supply replacement parts:
all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining clips, adjustable pre-stretch slides, roller pad
shafts, allen head bolts, weight selector pin, weight stack shaft, set screws, protector caps, adjustment chain, cotter pin, plunger, spring
and knob. Terms: Lifetime – for so long as the Customer owns the ParaBody product.
3. LIMITED WARRANTY ON CABLES AND UPHOLSTERY. If the coated cables or upholstery are defective in material or workmanship,
ParaBody will repair or replace them, at its option. Terms: Three (3) years.
4. CONDITIONS AND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person other than an authorized
ParaBody Service Center, any improper assembly, accident, or any other condition resulting from occurrences beyond the control of
ParaBody will void this Limited Warranty.
5. REPLACEMENT AND REPAIR EXPENSES. ParaBody will provide only replacement parts or repair under this warranty. The Owner is
responsible for all other costs. Such costs may include, but are not limited to: a. labor charges for service, removal, repair or reinstallation
of the ParaBody product or any component part; b. shipping, delivery, handling and administrative charges for returning parts to ParaBody;
and c. all necessary or incidental costs related to installation of the replacement parts.
6. SHIPPING. If shipping by the Owners is deemed necessary (in sole discretion of ParaBody), parts should be shipped in their original carton
or equivalent packaging, fully insured with shipping charges prepaid. ParaBody will not assume any responsibility for any loss or damage
incurred in shipping.
7. CLAIM PROCEDURES. If service on your ParaBody product is required during the warranty period, please contact our Customer Service
Department at 1-800-328-9714 for instructions regarding returning or replacing parts. Please have available the following information: (i) the
dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your product (the serial number location is called out on the final assembly
drawing included with your assembly instruction); (iv) a description of the nature of the problem.
8. OWNER’S RIGHT. This Limited Warranty gives you specific legal rights. You may also have other rights, which vary depending on local law.
9. LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law, shall have no greater
duration than the warranty period set forth above. There are no warranties which extend beyond the description in this Limited Warranty.
Because local laws do not allow limitations on how long an implied warranty lasts, the above limitations may not apply to you.
10. DISCLAIMER. No other express warranty has been made or will be made on behalf of ParaBody with respect to any ParaBody product or
the operation, repair or replacement of any ParaBody product. ParaBody shall not be responsible for injury, loss of use of the ParaBody
product, inconvenience, loss or damage to personal property, whether direct or indirect, and incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
NOTES:
7
Download from Www.Somanuals.com. All Manuals Search And Download.
LIFE FITNESS
14150 Sunfish Lake Blvd. Ramsey Minnesota, 55303 U.S.A.
Tel: 763.323.4500 Fax: 763.323.4797
800.328.9714 (Toll-free within the U.S. and Canada)
INTERNATIONALOFFICES
Life FitnessAtlantic BV
Life Fitness (UK) Ltd.
QueenAdelaide
Ely, Cambs CB7 4UB
United Kingdom
Phone CSS: (01353) 665507
Fax CSS: (01353) 666719
Atlantic Headquarters
Bijdorpplein 25-31
2992 LB Barendrecht
The Netherlands
Phone: (180) 646 666
Fax: (180) 646 703
Life Fitness EUROPE GmbH
Siemensstrasse 3
Life Fitness Benelux N.V.
Bijdorpplein 25-31
85716 Unterschleissheim
Germany
2992 LB Barendrecht
The Netherlands
Phone: (089) 31 77 51-0
Fax: (089) 31 77 51 99
Phone: 31 (180) 64 66 69
Fax: 31 (180) 64 66 99
Life Fitness Japan
8/F, Nippon Brunswick Building
5-27-7 Sendagaya
Shibuya-Ku, Tokyo 151-0051
Japan
Phone: 81 (3) 3359-4309
Fax: 81 (3) 3359-4307
Life Fitness Italia S.R.L.
Via Elvas 92
39042 Bressanone
Italy
Phone: 39 (472) 835-470
Fax: 39 (472) 833-150
Life Fitness Do Brazil
Al. Rio Negro, 433-Predio 2-Sala 2
3º andar (Confab)
Aplhaville-Barueri-Sao Paulo
CEP: 06454-904
Life FitnessAsia Pacific Limited
Room 2610, Miramar Tower
132 Nathan Road, Tsimshatsui
Kowloon, Hong Kong
Phone: (852) 2891-6677
Fax: (852) 2575-6001
Brazil
Phone: 55 (11)7295-2217
Fax: 55 (11) 7295-2218
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|