X3 TOTAL-BODY ELLIPTICAL CROSS-TRAINER
Owner’s Manual
8973701 REV B-3
Download from Www.Somanuals.com. All Manuals Search And Download.
CORPORATE HEADQUARTERS
5100 River Road
Schiller Park, Illinois 60176 • U.S.A.
847.288.3300 • FAX: 847.288.3703
Service phone number: 800.351.3737 (toll-free within U.S.A., Canada)
INTERNATIONAL OFFICES
Germany & Switzerland
Life Fitness Europe GMBH
All Other EMEA countries &
AMERICAS
Distributor Business C-EMEA*
North America
Bijdorpplein 25-31
Siemensstraße 3
Life Fitness Inc.
2992 LB Barendrecht
85716 Unterschleißheim
5100 N River Road
THE NETHERLANDS
GERMANY
Schiller Park, IL 60176 U.S.A
Telephone: (+31) 180 646 644
Fax: (+31) 180 646 699
Telephone: (+49) 89.31 77 51.0 (Germany)
(+41) 0848 000 901 (Switzerland)
Fax: (+49) 89.31 77 51.99 (Germany)
(+41) 043 818 07 20 (Switzerland)
Service Email: [email protected]
Sales/Marketing Email: [email protected]
Operating Hours: 08.30 -16.30h (CET)
Telephone: (847) 288 3300
Fax: (847) 288 3703
Service Email: [email protected]
Sales/Marketing Email:
Service Telephone: (800) 351 3737
Service Email: [email protected]
Sales/Marketing Email:
Operating Hours: 9.00h-17.00h (CET)
Operating Hours: 7:00 am-6:00 pm (CST)
ASIA PACIFIC (AP)
Austria
Brazil
Life Fitness Austria
Japan
Life Fitness Brasil
Life Fitness Japan
Vertriebs G.m.b.H.
Av. Cidade Jardim, 900
Dückegasse 7-9/3/36
Nippon Brunswick Bldg., #8F
Jd. Paulistano
1220 Vienna
5-27-7 Sendagaya
São Paulo, SP 01454-000
BRAZIL
AUSTRIA
Shibuya-Ku, Tokyo
Telephone: (+43) 1.61.57.198
Fax: (+43) 1.61.57.198.20
Japan 151-0051
SAC: 0800 773 8282
Telephone: (+81) 3.3359.4309
Fax: (+81) 3.3359.4307
Telephone: +55 (11) 3095 5200
Fax: +55 (11) 3095 5201
Service Email: [email protected]
Marketing/Sales Email: [email protected]
Operating Hours: 08:30-16.30.h (MEZ)
Service Email: [email protected]
Sales/Marketing Email: [email protected]
Operating Hours: 9.00h-17.00h (JAPAN)
Service Email: [email protected]
Sales/Marketing Email: [email protected]
Service Operating Hours:
Spain
Life Fitness IBERIA
China and Hong Kong
9:00 - 17:00 (BRT) (Monday-Friday)
Store Operating Hours:
Life Fitness Asia Pacific LTD
C/Frederic Mompou 5,1º1ª
08960 Sant Just Desvern Barcelona
SPAIN
9:00 -20:00 (BRT) (Monday-Friday)
10:00 - 16:00 (BRT) (Saturday)
Room 2610, Miramar Tower
132 Nathan Road
Telephone: (+34) 93.672.4660
Fax: (+34) 93.672.4670
Tsimshatsui, Kowloon
Latin America & Caribbean*
Life Fitness Inc.
HONG KONG
Service Email: [email protected]
Sales/Marketing Email: [email protected]
Operating Hours:
Telephone: (+852) 2891.6677
Fax: (+852) 2575.6001
5100 N River Road
Schiller Park, IL 60176 U.S.A
Service Email: [email protected]
Sales/Marketing Email: [email protected]
Operating Hours: 9.00h-18.00h
Telephone: (847) 288 3300
9.00h-18.00h (Monday-Thursday)
8.30h-15.00h (Friday)
Fax: (847) 288 3703
Service Email: [email protected]
Sales/Marketing Email:[email protected]
Operating Hours: 7:00am-6:00pm (CST)
Belgium
All Other Asia Pacific countries &
distributor business Asia Pacific*
Life Fitness Benelux NV
Parc Industrial de Petit-Rechain
Room 2610, Miramar Tower
EUROPE, MIDDLE EAST, & AFRICA (EMEA)
4800 Verviers
132 Nathan Road
BELGIUM
Tsimshatsui, Kowloon
Netherlands & Luxemburg
Telephone: (+32) 87 300 942
Fax: (+32) 87 300 943
HONG KONG
Life Fitness Atlantic BV
Telephone: (+852) 2891.6677
Fax: (+852) 2575.6001
Bijdorpplein 25-31
Service Email: [email protected]
Sales/Marketing Email:
2992 LB Barendrecht
Service Email: [email protected]
Sales/Marketing Email: [email protected]
Operating Hours: 9.00h-18.00h
THE NETHERLANDS
Operating Hours: 9.00h -17.00h (CET)
Telephone: (+31) 180 646 666
Fax: (+31) 180 646 699
Service Email: [email protected]
Sales/Marketing Email:
Italy
Life Fitness Europe GmbH
Siemensstraße 3
Operating Hours: 9.00h-17.00h (CET)
85716 Unterschleißheim
GERMANY
United Kingdom & Ireland
Telephone: (+39) 02-55378611
Service: 800438836 (In Italy)
Fax: (+39) 02-55378699
Life Fitness UK LTD
Queen Adelaide
Ely, Cambs, CB7 4UB
Service Email: [email protected]
Sales/Marketing Email: [email protected]
Operating Hours: 08:30 - 16:30h (CET)
Telephone: General Office (+44) 1353.666017
Customer Support (+44) 1353.665507
Fax: (+44) 1353.666018
Service Email: [email protected]
Sales/Marketing Email: [email protected]
Operating Hours:
General Office: 9.00am - 5.00pm (GMT)
Customer Support: 8.30am - 5.00pm (GMT)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a Life Fitness Total-Body Elliptical Cross-Trainer. Before using this product, please read this
owner’s manual in its entirety to ensure that you have the knowledge to safely and properly operate all of the features of
your Total-Body Elliptical Cross-Trainer. We hope you achieve the product experience that you expect, but if you do have
any service issues, please go to the How to Obtain Product Service section which will provide information on obtaining
product service.
FCC Warning - Possible Radio / Television Interference
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used
in accordance with the user manual, may cause harmful interference to radio communications. However, there is no
guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Class HB (Home): Domestic use.
CAUTION: Any changes or modifications to this equipment could void the product warranty.
Any service, other than cleaning or user maintenance, must be performed by an authorized service representative.
There are no user-serviceable parts.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1.
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.
X3 Total Body Elliptical Cross-Trainer Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Tools & Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Assemble the Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Assemble the Console Upright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connect Base Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Assemble the Rocker Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Assemble Moving Arms to Pedal Arms; Pedal / Moving Arm Joint Pivot Covers . . . . . . . . . . . . . . . . . .11
Assemble Front Base Shroud; Console Bracket to the Upright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connect all Console Wiring; Console to Console Bracket; Back Plastic Shell . . . . . . . . . . . . . . . . . . . .13
Plug in the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
CoachZone™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
CoachZone™ Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
CoachZone™ Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
ArmToner™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
GluteToner™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Resistance Level and Intensity Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
CoachZone™ Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Service and Product Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Preventative Maintenance Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
How to Obtain Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
3.
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
4.
5.
6.
6.1
6.2
6.3
6.4
6.5
6.6
6.7
7.
7.1
7.2
7.3.
8.
9.
© 2011 Life Fitness, a division of Brunswick Corporation. All rights reserved.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
This Operation Manual describes the functions of the following product:
Life Fitness Cross-Trainer Model:
X3
Statement of Purpose: The Life Fitness Total-Body Elliptical Cross-Trainer is an exercise machine that combines low-
impact elliptical pedaling, where resistance is independent of speed, with push/pull arm motion to provide an efficient,
effective total body workout.
CAUTION: Health-related injuries may result from incorrect or excessive use of exercise equipment. The
manufacturer STRONGLY recommends seeing a physician for a complete medical exam before undertaking an
exercise program, particularly if the user has a family history of high blood pressure or heart disease; or is over
the age of 45; or smokes, has high cholesterol, is obese, or has not exercised regularly in the past year. The
manufacturer also recommends consulting a fitness professional on the correct use of this product.
If, at any time while exercising, the user experiences faintness, dizziness, pain, or shortness of breath, he or
she must stop immediately.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Read all instructions before using the Total-Body Elliptical Cross-Trainer. Save these Instructions.
WARNING: Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death.
WARNING: Any adjustment devices that could interfere with the user’s movement should not be left projecting.
DANGER: To reduce the risk of electrical shock, always unplug this Life Fitness product before cleaning or attempting
any maintenance activity.
SAFETY WARNING: The safety of the product can be maintained only if it is examined regularly for
damage and wear. See Preventive Maintenance section for details.
The heart rate hand pulse sensors provide an approximate heart rate value. The sensors are not
medical devices and should not be used in any type of medical application.
•
Before using this product, it is essential to read this ENTIRE operation manual and ALL instructions. The
Total-Body Elliptical Cross-Trainer is intended for use solely in the manner described in this manual.
•
•
Always follow the console instructions for proper operation.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction con-
cerning use of the appliance by a person responsible for their safety.
•
•
Children should be supervised to ensure that they do not play with the appliance.
Never insert objects into any openings in this product. If an object should drop inside, turn off the power, unplug
the power cord from the outlet and carefully retrieve it. If the item cannot be reached, contact Life Fitness
Customer Support Services.
•
Never place liquids of any type directly on the unit, except in an accessory tray. Containers with lids are
recommended.
•
•
•
Do not use the Total-Body Elliptical Cross-Trainer outdoors, near swimming pools or in areas of high humidity.
Keep all loose clothing, shoelaces, and towels away from the Total-Body Elliptical Cross-Trainer pedals.
Keep the area around the Total-Body Elliptical Cross-Trainer clear of any obstructions, including walls and
furniture.
•
•
•
Use caution when mounting or dismounting the Total-Body Elliptical Cross-Trainer. While exercising, always hold
onto the user arms or stationary handlebar.
Never operate a Life Fitness product if it has been dropped, damaged, or even partially immersed in water.
Contact Life Fitness Customer Support Services.
Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the power
cord as a handle.
•
•
Do not run the power cord on the floor under or along side of the Total-Body Elliptical Cross-Trainer.
Wear shoes with rubber or high-traction soles. Do not use shoes with heels, leather soles, cleats or spikes. Do
not use the Total-Body Elliptical Cross-Trainer in bare feet.
•
•
•
Do not tip the Total-Body Elliptical Cross-Trainer on its side during operation.
Keep hands and feet away from all moving parts.
To ensure proper functioning of this product, do not install attachments or accessories that are not provided or
recommended by Life Fitness.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Use this product in a well-ventilated area.
Use this product on a solid, level surface.
Make sure that all components are fastened securely.
•
•
An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before
putting on or taking off parts.
•
•
Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to
persons.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Contact Life Fitness Customer Support Services.
•
•
•
Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Allow LCD consoles to “normalize” with respect to temperature for one hour before plugging the unit in and/or
using.
SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
X3 TOTAL-BODY ELLIPTICAL CROSS-TRAINER OVERVIEW
Console
Activity Zone
Contact Heart
Rate Sensors
Total Body Arm
X3 with Go Console
Water Bottle Holder
Accessory Tray
Leveler
Pedal & Pedal Insert
Transport Wheel
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Tools Needed for Assembly:
• Phillips Head Screwdriver
• 17mm Socket Wrench
3
ASSEMBLY
• 17mm Open End Wrench
3.1 TOOLS & HARDWARE
Identify the following components after unpacking your cross-trainer:
M3.5 X 8MM BLACK ZINC
PHILLIPS HEAD SCREW (QTY. 6)
M5 X 12MM BLACK
PHILLIPS HEAD SCREW (QTY. 4)
M5 X 12MM CLEAR ZINC
PHILLIPS HEAD SCREW (QTY. 8)
M5 X 8MM BLACK
PHILLIPS HEAD SCREW (QTY. 4)
M10 X 15MM SILVER HEX HEAD BOLT (QTY. 4)
M10 X 20MM CLEAR ZINC HEX HEAD BOLT (QTY. 3)
PLASTIC END CAP (QTY. 2)
M10 X 70MM SILVER HEX HEAD BOLT (QTY. 3)
M10 X 74MM BLACK HEX HEAD BOLT (QTY. 2)
M10 HEX NUT (QTY. 2)
WAVE WASHER (QTY.2)
LARGE FLAT WASHER (QTY. 2)
FLAT WASHER 10mm ID (QTY. 2)
10
20
30
40
50
60
70
80
90
100 110 120 130 140 150 160
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 PACKAGING
Parts: None
Remove all packaging and place main components to the side of the box. Break box down in each of the four corners.
3.3 ASSEMBLE THE STABILIZER
Parts: Hardware Bag #1
(2, M10 X 15mm Silver Hex Head Bolts)
Tools: 17mm Socket Wrench
Assemble the stabilizer tube (foot) (A) to the bottom base bracket (B) of the product using two M10 X 15mm Silver Hex
Head Bolts (C).
C
B
A
3.4 ASSEMBLE THE CONSOLE UPRIGHT
Parts: Hardware Bag #2
(3, M10 X 70mm Long Silver Hex Head Bolts)
(1, M10 X 20mm Clear Zinc Hex Head Bolt)
Tools: 17mm Socket Wrench
The console upright tube (D) is pre-assembled with one bolt so that you can simply lift the upright into place by pivoting
upward. Hold the upright in place and install three M10 X 70mm Long Silver Hex Head Bolts (E) into the side of the
main bracket (F). Install one M10 X 20mm Clear Zinc Hex Head Bolt (G) into the front of the bracket.
CAUTION: Do not pinch wires when assembling the upright.
3.5 CONNECT BASE WIRING
Parts: None
Connect the two plugs (H) at the base of the upright.
D
E
F
H
G
F
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 ASSEMBLE THE ROCKER ARMS
Parts: Hardware Bag #3
(2, Wave Washers, 2 Large Flat Washers)
(2, Flat Washers)
(2, M10 X 20mm Hex Head Bolts)
(2, Plastic End Caps)
Tools: 17mm Socket Wrench, Phillips Screwdriver, Rubber Mallet
Slide one large Flat Washer (I) and one Wave Washer (J) onto the user right pivot shaft (K). Slide the washers fully over
the pivot shaft until seated against the pre-installed stop ring (L).
Locate the user right rocker arm assembly (M) marked with an “R”. With the top handgrip facing the front of the unit,
slide the right rocker arm assembly onto the user right pivot shaft until seated against the washers.
Secure the rocker arm assembly to the pivot shaft using one Flat Washer (N) and one M10 X 20mm Hex Head Bolt (O).
Tighten the bolt securely. Repeat the procedure for the left rocker arm assembly.
Use a rubber mallet to tap the round end of the Plastic End Caps (P) into the side of the rocker arms.
M
L
K
J
N
O
I
P
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 ASSEMBLE MOVING ARMS TO PEDAL ARMS;
PEDAL / MOVING ARM JOINT PIVOT COVERS
Parts: Hardware Bag #4
(2, M10 X 74mm Black Hex Head Bolts)
(2, M10 Hex Nuts)
(4, M5 X 8mm Black Phillips Screws)
Tools: 17mm Socket Wrench, Phillips Screwdriver
Lift the front end of the user left pedal lever (Q) to meet the left rocker arm clevis (R). Secure the pedal lever to the
rocker arm clevis using one M10 X 74mm Hex Head Bolt (S) and one M10 Hex Nut (T). Tighten the bolt and nut secure-
ly. Repeat the procedure for the right pedal lever and rocker arm clevis.
Attach the left side lower pivot covers (U) over the moving arm/pedal arm pivot point. Snap the cover together over the
moving arm/pedal arm pivot point and use two M5 X 8mm Black Phillips Screws (V) to attach. Repeat for right side.
Note: Left and right covers are identical.
V
U
T
U
Q
R
S
V
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3.8 ASSEMBLE FRONT BASE SHROUD; CONSOLE BRACKET TO THE UPRIGHT
Parts: Hardware Bag #5
(8, M5 X 12mm Black Phillips Head Screws)
(2, M10 X 15mm Silver Hex Head Bolts)
Tools: Phillips Screwdriver, 17mm Socket Wrench
Position the left side base shroud (W) over the metal bracket (X) and screw in with four M5 X 12mm Black Phillips Head
Screws (Y). Repeat for the right side base shroud.
Slide the console bracket (Z) into the upright. Use two M10 X 15mm Silver Hex Head Bolts (A1) to attach the console
bracket to the upright.
Note: Avoid pinching the console wires.
Z
Y
W
X
A1
Y
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3.9 CONNECT ALL CONSOLE WIRING; CONSOLE TO CONSOLE BRACKET;
BACK PLASTIC SHELL
Parts: Hardware Bag #6
(4, M5 X12mm Black Phillips Screws)
(6, M3.5 X 8mm Black Zinc Screws)
Tools: Phillips Screwdriver
Position the console (B1) close to the console bracket (C1) and follow
the below instructions to connect all wiring.
Plug cables into the back of the display console:
1. Plug the 15-pin connector at the end of the upper wire harness into
the 15-pin connector (15P) in the back of the display console. Make
sure the connector snaps into place.
Go Console
Connections
15P
13P
G
2
Plug the 4-pin connector at the end of the contact heart rate sensor
cable to the 4-pin cable (4P) located in the console.
3. Plug in the flat 13-pin connector for the Coach Zone.
4. Push excess cables into the opening of the upright tube assembly.
5. Plug the ground cable (green wire, single spade) from the product
base to any of the three metal ground terminals (G) in the Go
Console, or into the connector (G) leading from the back of the
Track Console.
4P
Line up the four holes in the console bracket with the four holes in the
back of the display console. Attach the display console using four M5 X
12mm Black Phillips Screws (D1). Be careful not to pinch cables
between the console and the console bracket. Be sure to get each
screw started before fully tightening.
Track Console
Connections
13P
15P
Note: To avoid stripping, do not overtighten the screws.
Attach the plastic shell (E1) that covers the steel bracket in the back of
the console using six M3.5 X 8mm Black Zinc Screws (F1).
B1
G
C1
4P
D1
E1
F1
3.10 PLUG IN THE UNIT
Parts: Electric Transformer
Plug the black cord into the back of the machine and into a household electrical outlet.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4
INITIAL SETUP
Read the entire User Manual before setting up the Total-Body Elliptical Cross-Trainer.
Note: This Total Body Elliptical Cross-Trainer is speed independent. Resistance can be adjusted by means other than
speed.
WHERE TO PLACE THE TOTAL-BODY ELLIPTICAL CROSS-TRAINER
12“ (30.5cm)
After following all safety instructions move the Total-Body Elliptical Cross-Trainer to the
place where it will be used. Allow a minimum clearance of 12 inches (30.5 cm) around the
product. See specifications for full dimensions if needed. The Total-Body Elliptical Cross-
Trainer is equipped with front and rear wheels so that it is simple to push or pull the Total-
Body Elliptical Cross-Trainer to its final destination. To use the wheels make sure that the
levelers are twisted up far enough so that all wheels (A) can engage with the floor. Once
the Total-Body Elliptical Cross-Trainer is properly positioned, allow enough space in the
front of the Total-Body Elliptical Cross-Trainer for the movement of the pedal levers. Also
be sure to allow space on the side so that it is easy to mount the Total-Body Elliptical
Cross-Trainer from the side.
12“ (30.5cm)
12“ (30.5cm)
CAUTION: Make certain you have plenty of room for the
swing of the moving arms.
CAUTION: Place the Total-Body Elliptical Cross-Trainer
in a dry place. Do not place in highly humid areas, like
near swimming pools, as rust and corrosion may occur.
12“ (30.5cm)
A
HOW TO STABILIZE THE TOTAL-BODY ELLIPTICAL CROSS-TRAINER
Once the cross-trainer is positioned in the room lower the levelers on the front stabilizer to contact the floor. The levelers
will keep the Total-Body Elliptical Cross-Trainer fixed to the floor while using it.
CAUTION: Do not use the Total-Body Elliptical Cross-Trainer without the levelers touching the floor.
After placing the Total-Body Elliptical Cross-Trainer where it will be used, check the stability. If there is even a slight rock-
ing motion, or the unit is not stable the levelers will need to be adjusted. Determine which leveler is not resting firmly on
the floor. To adjust the levelers downward twist the rubber portion of the leg counterclockwise. To adjust the levelers
upward twist the rubber portion of the leg clockwise. Both levelers on the front stabilizer should be in contact with the
floor.
Note: After the Cross-Trainer is level, be sure to tighten the nut on the leveler against the stabilizer tube. If this is not
tightened, noise will occur.
POWERING UP THE TOTAL-BODY ELLIPTICAL CROSS-TRAINER
Your Life Fitness Total-Body Elliptical Cross-Trainer may come with either a U.S. power
supply or one of several international power supplies. Insert the appropriate power
adapter jack into the connector (B) on the back of the Total-Body Elliptical Cross-Trainer.
Then insert the plug into the wall outlet. Make sure the cord is placed so it doesn't bind
and will not be walked on. Then check that the main LCD display lights up, and press a
B
button on the CoachZone to make sure it is powered. If not, recheck the plug and the
wall connections and make sure the wall outlet has power.
MOUNTING THE MACHINE
When mounting the machine it is recommended that the pedal closest to you is in its lowest position. This can be done by
pushing the arms to rotate the pedal until it is centered to the side of you at its lowest position. If you are standing to the left
side of the machine, when facing the console, place your left foot on the pedal closest to you and then swing your right leg
over to the right pedal. Use the stationary handlebar to stabilize yourself.
DISMOUNTING THE MACHINE
Bring the machine to a stop. It is recommended to put the pedal in it’s lowest position on the side of the unit you will be dis-
mounting. If dismounting the machine on the left side, when facing the console, step off with the right leg first followed by
the left leg. Use the stationary handlebar for stabilization.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5
MAIN FEATURES
CONTACT HEART RATE
The X3 includes hand pulse sensors on the stationary handlebar that are a built-in heart rate monitoring system. During a
workout grasp the hand pulse sensors to monitor your heart rate. We recommend using the heart rate chest strap provided
with your console during workouts and using the hand pulse sensors to only occasionally monitor your heart rate when not
using the chest strap. In addition, to utilize heart rate controlled workouts the chest strap must be used. For the most accu-
rate reading, use a comfortable grip. The console will show a heart rate reading after 15 to 20 seconds.
Hand pulse sensors can work differently with different body types. With some individuals it can be very difficult to extract a
heart rate reading. Follow the tips below to improve the heart rate reading:
·
·
·
·
·
Remove your hands from the heart rate sensors and wait for the heart rate display to clear. Grasp sensors again.
Make sure hands are fully contacting the sensors.
Dry hands periodically during use.
Limit movement.
Clean hand pulse sensors.
Note: The heart rate hand pulse sensors provide an approximate heart rate value. The sensors are not medical devices
and should not be used in any type of medical application.
ACCESSORIES
The X3 comes standard with two water bottle holders (C) and an accessory tray (D).
C
C
D
CUSHIONED PEDAL INSERT
The X3 comes equipped with a cushioned pedal insert (E) for increased comfort during workouts.
E
15
Download from Www.Somanuals.com. All Manuals Search And Download.
6
COACHZONE™
6.1 COACHZONE™ OVERVIEW
The CoachZone is designed to provide extra workout variety and motivation through additional instruction and feedback.
The ArmToner and GluteToner workout enhancements help users target specific muscle groups and break the workout
into manageable increments. The appropriate muscle groups that you should be using will illuminate when you perform
specific movements. The UP/DOWN level arrow keys are a convenient way for users to change difficulty levels.
USING THE COACHZONE™
•
•
•
•
Select a workout from the main console display.
Begin workout.
At any point during a workout, choose a CoachZone workout enhancement: ArmToner or GluteToner.
Follow the coaching instructions displayed on the LED.
C
D
D
B
A
A
E
E
F
B
6.2 COACHZONE™ DESCRIPTIONS
This section lists and describes the functions for the keys and LEDs on the CoachZone.
A. WORKOUT ENHANCEMENT SELECTION KEYS:
Select the ArmToner or GluteToner to concentrate on specific upper body or lower body muscles.
B. SELECTION INDICATOR LEDs:
A light next to the selected workout enhancement will illuminate.
C. MUSCLE INDICATOR LEDs:
The Muscle Indicator LEDs show you which muscles should be utilized while performing specific movements. The
bicep, chest, triceps, quad, calf, hamstring, and/or glutes will illuminate depending on your selection.
D. COACH INDICATOR LEDs:
The Coach Indicator LEDs prompt you to focus on one or more of the following movements: forward, squat, reverse,
push, use fixed handles, or pull.
E. UP/DOWN LEVEL KEYS:
Press the UP/DOWN Level Arrow Keys to increase or decrease either the resistance or difficulty level.
F. TIMER
The amber LED timer displays a count down of time remaining for workout intervals (ranging from 15-60 seconds).
Note: The CoachZone timer acts independently of the console timer.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 ARMTONER™
The ArmToner selection utilizes a pre-programmed series of prompts and intervals focused on upper-body muscles.
ACTIVATE ARMTONER
Press the ArmToner key during any workout to activate the selection.
PAUSE ARMTONER
Press the ArmToner key once while using the ArmToner selection. PAU will display on the CoachZone Timer. Press the
ArmToner key again to resume. The CoachZone automatically shuts off if the ArmToner key isn’t pressed within 5 minutes.
STOP ARMTONER
Press and hold the ArmToner key while using the ArmToner selection. The timer and coaching will cease. The CoachZone
automatically shuts down after 5 minutes of non-use.
DISPLAY CHANGES
The following blue coach indicator LEDs will activate and prompt you to focus on certain upper body movements: push,
pull, and use fixed handles. The corresponding blue muscle indicator LEDs will illuminate to display the muscles utilized.
See the ArmToner Coach and Muscle Indicator Chart below for additional information.
ARMTONER™ COACH AND MUSCLE INDICATOR CHART
Coach Indicator
Muscle Indicator
Push
Chest; Triceps
Pull
Bicep
Use Fixed Handles
Upper body gets a rest
Note: Upper body motions will always work in conjunction with lower body movements.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6.4 GLUTETONER™
The GluteToner selection utilizes a pre-programmed series of prompts and intervals focused on lower body muscles and
glutes.
ACTIVATE GLUTETONER
Press the GluteToner key during any workout to activate the selection.
PAUSE GLUTETONER
Press the GluteToner key once while using the GluteToner selection. PAU will display on the CoachZone Timer. Press the
GluteToner key again to resume.
STOP GLUTETONER
Press and hold the GluteToner key while using the GluteToner selection. The timer and coaching will cease. The
CoachZone automatically shuts down after 5 minutes of non-use.
DISPLAY CHANGES
The following amber coach indicator LEDs will activate and prompt you to focus on certain lower body movements: forward,
reverse, and squat. The corresponding amber muscle indicator LEDs will illuminate to display the muscles utilized. See the
GluteToner Coach and Muscle Indicator Chart below for additional information.
GLUTETONER™ COACH AND MUSCLE INDICATOR CHART
Coach Indicator
Muscle Indicator
Forward
Hamstring; Glute
Reverse
Squat
Quad; Calf
Glute; Quad; Hamstring
Note: The squat motion should only be done while pedaling in reverse and holding the fixed or stationary handles.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5 TIMER
The amber LED timer breaks workouts into manageable increments by displaying a count down of the time remaining on
specific movements. When the timer reaches zero, the Coach LEDs will change. Slow your movement to a complete
stop, and begin the next interval.
6.6 RESISTANCE LEVEL & INTENSITY LEVEL
KEY PRESS
The Resistance Level UP/DOWN Arrow Keys only function after a user selects and begins a workout using the X3 main
console. The UP/DOWN Level Arrow Keys control the brake resistance level (1-20) during a Quick Start or Manual workout.
The UP/DOWN Level Arrow Keys control the overall difficulty level (1-20 with corresponding ranges) during the following
workouts: Random, Hill, EZ Incline, and Sports Training.
MAIN CONSOLE DISPLAY CHANGES
The digital reading for the actual resistance or difficulty level changes on the main console display when a user presses the
UP/DOWN Level Arrow Keys on the CoachZone.
6.7 COACHZONE™ SETTINGS
The CoachZone allows the user to change certain settings.
AUDIO ADJUSTMENT INSTRUCTIONS
A beeping sound occurs whenever the timer reaches zero or a new program is selected. The user can turn off the beep-
ing sound by pressing and holding the GluteToner key for seven seconds. A beep will sound to confirm the change in
settings.
Note: Settings can only be changed when the CoachZone is idle. They cannot be changed while using a workout
enhancement.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7
SERVICE & PRODUCT MAINTENANCE
7.1 TROUBLESHOOTING
Problem
Cause / Solution
Check to see that the power cord is fully plugged into the back of the
Total-Body Elliptical Cross-Trainer and into the wall. Make sure the power
cord is fully seated into the back of the Total-Body Elliptical Cross-Trainer.
You may be in “Energy Saver Mode”. Press the “Energy Saver” button to
see if the console turns on.
No power.
Verify that all customer assembly connections are working properly.
Unplug and re-plug each connection to verify. Look to see if any cables
were pinched during assembly.
Remove the moving arm pivot covers and check to make certain the bolt
holding the total body arm in place is fully tightened. If the total body arms
still feel loose, you may want to disassemble the total body arms and
make sure all of the proper hardware from the assembly instructions was
used.
Total Body Arms feel loose.
Some noise from the pedals is normal. It will vary depending on the
weight of the user. Check assembly hardware beneath pedal to make
certain it is tight.
Noise is coming from pedals.
Hear noise as speed increases.
It is normal for any mechanical device to become louder as speed
increases.
Your product may be in ‘Safety Mode’. Refer to the console manual on
how to turn off this setting.
Start-Up resistance seems very diffi-
cult.
Turn the unit off and then on again.
Can’t feel a resistance change at the
beginning levels.
The resistance curve of the Total-Body Elliptical Cross-Trainer is designed
so that you can feel a greater difference in resistance at higher levels.
Potential reasons for the wireless heart rate not to work properly include:
1. The wireless heart rate is turned OFF in the Settings Menu. Enter
the Settings Menu and verify that WIRELESS HR is turned ON.
2. There is poor contact between the telemetry heart rate strap and
the skin.
3. There is electrical interference from electrical appliances with the
telemetry heart rate strap from fluorescent lights, kitchen appliances,
etc. Move the Total-Body Elliptical Cross-Trainer to a different
location or move electrical appliances away from the Total-Body
Elliptical Cross-Trainer.
4. The battery in the Heart Rate Telemetry Strap needs to be replaced.
The battery is a CR2032 (3V).
Wireless heart rate is not working.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause / Solution
Problem
It is very important that the nut on the leveler is tightened against the
stabilizer tube after the product is leveled. Ensure that this nut is tight.
Creaking sound is coming from the
Stabilizers.
Turn the unit off and then on again.
“OFF” is displayed in the LEVEL
window on the console.
If power cycling the product did not work, there is a problem with the
resistance system. Contact Customer Support Services for assist
ance.
Be sure to grasp the sensors firmly and keep hands still. If heart rate
seems substantially higher or lower than expected, remove hands from
sensors until heart rate disappears.
Tips for contact heart rate:
1. Dry hands to prevent slipping on the sensors.
2. Apply hands to all four sensors (two in each hand).
3. Grasp sensors firmly.
The contact heart rate sensors are
.
not reading my heart rate correctly
4. Apply constant pressure to the sensors.
.
5. May need to wait longer for heart rate to display
Note: The heart rate hand pulse sensors provide an approximate heart
rate value. The sensors are not medical devices and should not be used
in any type of medical application.
s off after 5 minutes of inactivity
The CoachZone is preset to turn the light
in order to save power.
f.
CoachZone keeps turning of
This is displayed if your version of the iPod Player is not supported by
the cross-trainer.
iPod is not recognized.
.
It may also be displayed if the connector on the cross-trainer or iPod
is damaged.
Note: Applies to Track Console only
iPod is not charging while in Energy
Saver mode.
Your iPod will not charge if the cross-trainer enters Energy Saver mode.
This is normal.
.
Note: Applies to Track Console only
s the real time clock
The console has an internal battery that keep
This real time clock is only
functioning if the cross-trainer is unplugged.
”Low Battery” message is displayed
on the console.
irtual Trainer” website. You do
needed if you use the Life Fitness ”V
act
not need to replace the battery if you do not use the website. Cont
.
Note: Applies to Track Console only
. The
Customer Service for guidance on how to change the battery
battery is a CR1632 (3V).
Try unplugging the
The console may not have recognized the USB stick.
USB stick and plugging it back in.
When I try to save a workout on the
USB stick I receive the following
The USB stick may be full.
VE SEE
message: UNABLE TO SA
MANUAL.
Note: Applies to Track Console only
atible with the product.
The USB stick may not be comp
.
stick.
Try using a different USB
21
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 PREVENTATIVE MAINTENANCE TIPS
The Life Fitness Total Body Elliptical Cross-Trainer is backed by the engineering excellence and reliability of Life Fitness
and is one of the most rugged and trouble-free pieces of exercise equipment on the market today.
Note: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep
the equipment out of use until the defective parts are required or replaced. Pay special attention to parts that are subject
to wear, as outlined below.
The following preventative maintenance tips will keep the Life Fitness Total Body Elliptical Cross-Trainer operating at
Peak performance:
Important: Turn the cross-trainer off and unplug prior to performing any maintenance.
Inspect the power cord. If the cord is damaged call technical
Weekly
Monthly
support. Make sure the cord is positioned in a location where it will
not be damaged.
Clean the top surface of the pedals.
Clean the display console and all exterior surfaces with mild soap,
water and a soft cotton cloth or a Life Fitness approved cleaner.
Note: Do not use paper towels, ammonia or acid based cleaners
on the product. At no time should cleaner be applied directly to any
part of the equipment; spray the cleaner on a soft cloth and then
wipe the unit.
Inspect the exterior parts for wear and check that user assembly
bolts are still tight.
Note: Long fingernails may damage or scratch the surface of the console. Use the pad of the finger to press the keys.
LIFE FITNESS APPROVED CLEANERS
Two preferred cleaners have been approved by Life Fitness reliability experts: PureGreen 24 and Gym Wipes. Both
cleaners will safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial
Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.
PureGreen 24 is available in a convenient spray. Apply the spray to a microfiber cloth and wipe down the equipment.
Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for
fungus and viral control.
Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes
on the equipment for at least 2 minutes for general disinfection purposes.
Contact Life Fitness Customer Support Services to order these cleaners.
Call 1-800-351-3737 or email: [email protected].
LIFE FITNESS COMPATIBLE CLEANERS
Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior sur-
faces. Use a soft cotton cloth only. Apply the cleaner to the cotton cloth before cleaning. DO NOT use ammonia or acid
based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the
equipment surfaces.
7.3 HOW TO OBTAIN PRODUCT SERVICE
1. Please contact your dealer or Life Fitness Customer Service at 1-800-351-3737.
2. Verify the symptom and review the operating instructions and troubleshooting matrix.
3. Locate and document the serial number of the unit. The serial number plate is located on the main frame, in front of the
rear shroud. Please also have proof of purchase information available.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
8
SPECIFICATIONS
LIFE FITNESS X3 CROSS-TRAINER SPECIFICATIONS
Designed Use:
Home
Max User Weight:
Resistance System:
Stride Length:
350 lbs / 159 kilograms
Eddy Current
20 inches
CoachZone™:
Yes
Contact Heart Rate:
Cushioned Pedal Insert:
Accessories:
Yes
Yes
2 water bottle holders and 1 accessory tray
120 Volt (U.S.), 220 Volt (Europe), 240+ Volt (Australia)
Power Supply:
ASSEMBLED / WORKING DIMENSIONS:
Length
Width
81 inches / 206 centimeters
30 inches / 76 centimeters
Height
Weight
59 inches / 150 centimeters
225 pounds / 102 kilograms
SHIPPING DIMENSIONS:
Length
Width
Height
Weight
81 inches / 206 centimeters
21 inches / 53 centimeters
32 inches / 81 centimeters
242 pounds / 110 kilograms
23
Download from Www.Somanuals.com. All Manuals Search And Download.
9
WARRANTY INFORMATION
Model
Limited Lifetime
3 Years
1 Year
6 Months
X3 Cross-Trainer
Base
Electrical Parts &
Mechanical Parts
Labor
Cushioned Pedal
Insert
Frame
WHAT IS COVERED:
This Life Fitness consumer product ("Product") is warranted to be free of all defects in material and workmanship.
WHO IS COVERED:
The original purchaser or any person receiving a newly purchased Product as a gift from the original purchaser.
Warranty will be voided on subsequent transfers.
HOW LONG IS IT COVERED:
Residential: All electrical and mechanical components and labor are covered, after the date of purchase, as listed on the
chart above.
Non-Residential: Warranty void (this Product is intended for residential use only).
WHO PAYS SHIPPING & INSURANCE FOR SERVICE:
If the Product or any warranted part must be returned to a service facility for repairs, Life Fitness will pay all shipping
and insurance charges during the warranty period (within the United States only). The purchaser is responsible for ship-
ping and insurance charges after the warranty has expired.
WHAT WE WILL DO TO CORRECT COVERED DEFECTS:
We will ship to you any new or rebuilt replacement part or component, or, at our option, replace the Product. Such
replacement parts are warranted for the remaining portion of the original warranty period.
WHAT IS NOT COVERED:
Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation,
debris resulting from any construction activities in the Product's environment, rust or corrosion as a result of the Product's
location, alterations or modifications without our written authorization or by failure on your part to use, operate and main-
tain the Product as set out in your User Manual ("Manual"). All terms of this warranty are void if this Product is moved
beyond the continental borders of the United States of America (excluding Alaska, Hawaii and Canada) and are then
subject to the terms provided by that country's local authorized Life Fitness Representative.
WHAT YOU MUST DO:
Retain proof of purchase. Use, operate and maintain the Product as specified in the Manual; notify the place of purchase
of any defect within 10 days after discovery of the defect; if instructed, return any defective part for replacement or, if
necessary, the entire Product for repair. Life Fitness reserves the right to decide whether or not a product is to be
returned for repair.
USER MANUAL:
It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to perform the peri-
odic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.
PRODUCT REGISTRATION:
Register online at www.lifefitness.com/home/product-registration.html. Our receipt assures that your name, address
and date of purchase are on file as a registered owner of the Product. Being a registered owner assures coverage in the
event you lose your proof of purchase. Please retain your proof of purchase, such as your bill of sale or receipt.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO GET PARTS & SERVICE:
Refer to page one of this manual for your local service contact information. Reference your name, address and the serial
number of your Product (consoles and frames may have separate serial numbers). They will tell you how to get a
replacement part, or, if necessary, arrange for service where your Product is located.
EXCLUSIVE WARRANTY:
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART. We neither
assume nor authorize any person to assure for us any other obligation or liability concerning the sale of this Product.
Under no circumstances shall we be liable under this warranty, or otherwise, of any damage to any person or property,
including any lost profits or lost savings, for any special, indirect, secondary, incidental or consequential damages of any
nature arising out of the use of or inability to use this Product. Some states do not allow the exclusion or limitation of
implied warranties or of liability for incidental or consequential damages, so the above limitations or exclusions may not
apply to you. Warranties may vary outside the U.S. Contact Life Fitness for details.
CHANGES IN WARRANTY NOT AUTHORIZED:
No one is authorized to change, modify or extend the terms of this limited warranty.
EFFECT OF U.S. STATE LAWS:
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|