Operating instructions
Page 14
GB
No-frost combined refrigerator-freezer
7082 499-00
CBNes 62 211
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Description of appliance and equipment
1
2
3
4
5
6
7
8
9
bl
bm
Operating and control elements
Adjustable door racks
Adjustable storage shelves
Bottle rack
Type plate (behind the vegetable drawer on the left-hand side)
BioFresh drawers
Water filter
Upper freezer drawer
Lower freezer drawer
IceMaker (in the interior of the upper freezer drawer)
Ventilation grille. In this area, the exchange of air for the refrig-
eration unit takes place. Never cover this grille or otherwise
obstruct the air flow.
Temperature and control display
Water filter has to be changed
Refrigerator temperature display
Menu mode is activated
Operating and control elements
(for setting additional functions)
The electronic control panel has the new "touch capacitance
technology". Any function can be activated by touching the cor-
responding icon.
Freezer temperature display
The exact contact point
is between the symbol and its label
Refrigerator
operating icons
Control
icons
Freezer
operating icons
Appliance control icons
Freezer operating icons
Refrigerator operating icons
Power failure LED
Temperature setting buttons
Mute alarm (refrigerator and freezer)
Dust filter LED
Freezer ON/OFF
SuperFrost
SuperCool
The dust filter in the appliance
plinth must be cleaned.
Refrigerator ON/OFF
Temperature setting buttons
SuperCooling LED
Child lock LED
Alarm LED
IceMaker ON/OFF
IceMaker ON LED
SuperFrost LED
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Water filter
Installing the water filter
Before switching on the appliance, install the water filter provided
in the interior rear wall of the refrigerator compartment.
This ensures good ice cube quality and keeps the water circuit
free of solids such as sand.
1. Remove the cover of the filter
socket.
Water filter
location
2. Insert the filter and turn it 90°
clockwise.
Replace the filter when the waterdrop
symbol appears in the temperature
display.
Filters can be obtained from your dealer.
Thedropsymbolmustbecancelledafter
the filter has been changed. For detailed
instructions see section entitled "Setup
mode".
Removing the water filter
Caution!
Turn the filter 90° anticlockwise
and remove.
To avoid the risk of bacteria growth, the water filter
must be changed when the waterdrop symbol appears
on the display!
It is not necessary to switch off the water supply when removing
or installing the water filter.
Saving energy
- Always ensure good ventilation. Do not cover ventilation open-
ings or grille.
- Always keep fan slits clear.
- Avoidpositioningtheapplianceindirectsunlightornearcookers,
radiators and similar sources of heat.
- Theenergyconsumptiondependsontheinstallationconditions,
e.g. the ambient temperature.
- Keep the time the appliance is open to a minimum.
- Store food logically.
- Keep all food properly packed and covered so as to avoid its
frosting up on the outside.
- Alwaysallowhotfoodtocooltoroomtemperaturebeforeplacing
in the appliance.
- Defrost frozen food in the refrigerator.
- If there is a thick layer of frost in the appliance: defrost the appli-
ance.
- Empty and switch off the refrigerator for longer vacation periods.
- Use the vacation function for longer vacation periods.
Accumulated dust increases the energy consumption:
- Once a year, dust the refrigeration unit together with the metal
grid of the heat exchanger at the back of the appliance.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Audible warning signal
Switching the appliance on and off
The appliance is equipped with an alarm function.
You are advised to clean the appliance before switching it on for
the first time (see "Cleaning").
Audible door alarm:
Do not load with frozen food until the temperature shows at least
-18°C.The refrigerator and freezer compartments can be operated
separately.
If an appliance door is left open for more than 60 seconds,
the audible warning signal will sound. Touch the ALARM
icontocancelthealarm.Thealarmswitchesbacktostandby
when the door is shut.
Audible/visual temperature alarm:
Switching on: Touch the On/Off icons (on left
for refrigerator, on right for freezer) so that the
temperature displays light up or flash.
It sounds when it is not cold enough in the freezer compartment.
The temperature display and the
LED will also flash.
The audible warning device is switched off by touching the
ALARM icon.The temperature display will continue to flash
until the cause of the alarm has been rectified.
Switchingoff:KeeptheOn/Officonspressedforapprox.3seconds.
This can be caused by:
Setting the temperature
• the freezer door being left open for a long time, allowing warm
ambient air to enter;
The appliance is pre-set for normal operation. We recommend
temperatures of +5°C in the refrigerator and -18°C in the freezer.
• a long power failure;
• a fault in the appliance.
To reduce the temperature: Touch the
Down icon; on left for refrigerator and on
right for freezer.
In each case, make sure food has not thawed or perished.
To increase the temperature: Touch the
Up icon.
Power failure/FrostControl display
If the
LED comes on on the control panel, this means that the
- While you are entering the temperature, the set temperature will
flash on the display.
freezer temperature has risen too high during the last few hours or
days due to a power failure.
- When you touch the temperature setting icons for the first time,
the most recent setting ("reference setting") is displayed.
If you touch the ALARM icon now, the highest temperature
registered during the power failure will be displayed. Check
the quality of the food and its suitability for consumption in
case it has become too warm or even defrosted.
- You can change the settings in increments of 1°C by briefly touch-
ing the icons again. If the icons are held, the temperature setting
will change faster.
- Approximately 5 seconds after the last touch, the display will
automatically show the actual freezing or cooling temperature
("actual setting").
Thehighesttemperaturewillappearforappox.1minute.After
that, the actual temperature in the freezer will re-appear.The
display can be switched off by touching the ALARM icon.
- You can change the temperatures
in the refrigerator: between 9°C and 3°C and
in the freezer: between -14°C and -28°C.
SuperCool
Touching the SuperCool icon switches the refrigerator compart-
ment to maximum cooling. It is recommended particularly if you
wish to cool large quantities of food, drinks, freshly baked goods
or meals rapidly.
Temperature display
In normal operation, the following settings will be displayed:
- the average refrigerator temperature and
- the warmest frozen food temperature.
Switching on: Touch the SuperCool icon briefly so that
When starting up for the first time or when the
appliance is warm, dashes will appear until
the temperature reaches a level that can be
displayed (below 0°C in the freezer).
the LED
comes on. The refrigerator temperature will
drop to its lowest value.
Note: The SuperCool function uses slightly more energy. After
approximately six hours, however, the refrigerator switches back
automatically to normal energy-saving operation. If required, the
SuperCool function can be switched off sooner.
The display will flash:
- if you change the temperature or
- if the temperature rises by several degrees, indicating cold loss,
e.g. if you place fresh, "warm" food in the freezer or if you remove
or re-pack frozen food the temperature may rise for a short time
due to warm air flowing into the freezer.
Switching off: Touch the SuperCool icon again until the LED
goes out.
IfF1toF5appearsinthedisplay,theappliancehasafault.Consultthe
customerservicedepartmentindicatingthefaultnumberdisplayed.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup mode
= Confirm water filter change
The following functions can be activated in setup mode:
= Child lock
Afterthewaterfilterhasbeenchanged,thedrop
symbol on the display must be reset.
Resetting the drop symbol
= Confirm water filter change
= Ice maker vacation state
• Activate setup mode by touching the
SuperFrost icon for 5 seconds.
= Water quantity for ice cube tray
= Set BioFresh temperature
= Display brightness
• Touch the freezer compartment Down icon
until appears in the display.
• Touch the SuperFrost icon.
- The display reads
= Door gasket heating control
=Confirm dust filter cleaning
• Touch the SuperFrost icon again.
Activating setup mode:
• Touch the SuperFrost icon for five seconds.
- The display reads
• The drop symbol disappears.
- The SuperFrost LED
comes on for 5 seconds,
- after 5 seconds will flash in the display.
The appliance is in setup mode now.
• Exit setup mode by touching
the freezer compartment On/Off icon.
You can select the setup mode functions by touching
the freezer compartment temperature setting icons.
= Ice maker vacation state
See section entitled "Ice maker".
Note: In setup mode the display will flash continuously.
Exiting setup mode:
= Water quantity for ice cube tray
• Touch the freezer compartment On/Off icon
The appliance will change back to normal operation.
If the produced ice cubes of the ice maker are too small, the inflow-
ing water quantity can be adjusted.
Adjusting the water quantity
= Child lock
• Activate setup mode by touching the SuperFrost icon for 5 sec-
onds.
The child lock is designed to protect the appliance from being
switched off accidentally.
• Touch the freezer compartment Down icon until
appears in the display.
Activating the child lock
• Activate setup mode by touching
• Touch the SuperFrost icon.
the SuperFrost icon for 5 seconds.
- The display reads
- The display reads
• Touch the freezer compartment Up icon once only so that E 4
• Touch the SuperFrost icon.
appears in the display.
- The display reads
Caution!
• Touch the SuperFrost icon again.
Do not increase for more than one step. If the adjusted value
is too high, the ice cube tray of the ice maker could overflow.
- The
LED is lit and the child lock is activated.
• Touch the SuperFrost icon again.
• Exit setup mode by touching
the freezer compartment On/Off icon.
• Exit setup mode by touching the
freezer compartment On/Off icon.
Deactivating the child lock
Check the ice cube size within the next days. If the ice cubes are
still too small, follow the steps above again.
• Activate setup mode by touching
the SuperFrost icon for 5 seconds.
- The display reads
• Touch the SuperFrost icon.
- The display reads
• Touch the SuperFrost icon again.
- The
LED goes out. The child lock is deactivated.
• Exit setup mode by touching
the freezer compartment On/Off icon.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
= Set BioFresh temperature
= Door gasket heating control
The temperature in the BioFresh drawers may be changed.
Condensed water on the gasket of the refrigerator doors can be
eliminated by activating the door gasket heating.
Setting the BioFresh temperature
Activating the door gasket heating
• Activate setup mode by touching the SuperFrost icon for 5 sec-
onds.
• Activate setup mode by touching the SuperFrost icon for 5 sec-
onds
• Touch the freezer compartment Down icon until appears in
the display.
• Touch the freezer compartment Down icon until appears in
the display.
• Touch the SuperFrost icon.
- The display reads
• Touch the SuperFrost icon.
- The display reads
• Touch the freezer compartment Up/Down icons
and set
• Touch the freezer compartment
Up/Down icons to select
6 - 9 to increase the temperature (warmer),
4 - 1 to reduce the temperature.
= at slight condensation of the gasket,
= at heavy condensation of the gasket,
= heater off.
CAUTION!
• Touch the SuperFrost icon at the desired value.
For values b4 - b1, the temperature in the drawers can
drop to below 0°C. Food may freeze.
• Exit setup mode by touching
the freezer compartment On/Off icon.
• Touch the SuperFrost icon at the desired value.
• Exit setup mode by touching
the freezer compartment On/Off icon.
= Confirm dust filter cleaning
Once the dust filter in the appliance plinth has been cleaned, the
dust filter LED
in the display must be cancelled.
Cancelling the dust filter symbol
= Display brightness
Adjusting the display brightness
• Activate setup mode by touching the SuperFrost icon for 5
seconds.
• Activate setup mode by touching the SuperFrost icon for 5 sec-
• Touch the freezer compartment Down icon until appears in
the display.
onds.
• Touch the freezer compartment Down icon until appears in
• Touch the SuperFrost icon.
the display.
- The display reads
• Touch the SuperFrost icon.
- The display reads
• Touch the SuperFrost icon.
- The display reads
• Touch the freezer compartment
Up/Down icons to select
• The dust filter symbol has been cancelled.
0 = minimum to
5 = maximum brightness.
• Exit setup mode by touching
the freezer compartment On/Off icon.
• Touch the SuperFrost icon at the desired value.
• Exit setup mode by touching
the freezer compartment On/Off icon.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
When storing tall bottles, the
bottom door rack must be moved
further up.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Arranging food
BioFresh compartment
The BioFresh compartment enables you to keep food for up to
3 times longer than in normal refrigerators.
The constant temperature of just above 0°C and the adjustable
humidity provide the ideal storage conditions for different types
of food.
Humidity selection
(1) butter, cheese
(2) eggs
(3) bottles
(4) frozen food, ice cubes
(5) meat, sausage products, dairy products
(6) baked goods, pre-cooked meals
(7) fruit, vegetables, salads (for high humidity setting)
meat, cold meats, dairy products (for low humidity setting)
TheadjustablehumidityisexplainedintheBioFreshcompart-
Dry
Humid
ment section.
Small humidity symbol - slide
control to left.
High relative humidity of max.
90%, large humidity symbol -
slide control to right.
Note
This setting is suitable for dry
or wrapped food like dairy
products, meat, fish, cold
meats.
• Food which gives off or absorbs odours and flavours as well as
liquids should always be stored covered or in closed containers.
• High-percentage alcohols should be tightly sealed and stored
upright.
This setting is suitable for
storing unwrapped food with
a high moisture content such
as salad, vegetables and fruit.
Notes
• Thehumidityinthecompartmentdependsonthemoisturecontent
of the food in it, and the frequency with which the compartment
is opened.
• The fresher the product and the higher its quality, the longer it will
keep.
• Unwrapped animal and vegetable foods should be stored sepa-
rately in the drawers. If there is not enough space for them to be
stored separately, make sure that they are wrapped.Do not allow
different types of meat to come into contact with one another but
keepthempackagedseparatelysoastoavoidprematurebacterial
spoilage.
• The following products should not be stored in the BioFresh
compartment: hard cheese, potatoes, cold-sensitive vegetables
such as cucumbers, aubergines, avocadoes, semiripe tomatoes,
zucchini, all cold-sensitive tropical fruits such as pineapples,
bananas, grapefruit, melons, mangos, papayas, etc.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezer compartment description
Notes on freezing and storage
Both drawers can be used for freezing of food or storage of frozen
• Always store identical food items together.
food.
• Packfoodwhichyouarefreezingyourselfinquantitiesappropriate
to your household.To ensure that the food freezes right through,
the following quantities should not be exceeded per package:
fruit, vegetables: up to 1 kg, meat: up to 2.5 kg.
• Pack frozen food in standard freezer bags or reuseable plastic,
metal or aluminium containers.
The ice cube bin in the upper drawer is intended for ice cubes only.
If you need the whole upper drawer for freezing or storage, the ice
cube bin can be removed.
Important: The ice maker will not eject the ice cubes of its tray if
• Do not allow fresh food which is to be frozen to come into contact
with food already frozen. Always keep packs dry in order to avoid
them sticking together.
the bin has been removed.
Ice cube bin
Ice maker
• Alwayswritethedateandcontentsonthepackanddonotexceed
the stated storage time for the food.
• Do not freeze bottles and cans which contain carbonated drinks
as they might burst.
• Onlytakeoutasmuchfoodasisimmediatelyrequiredforthawing.
Use food which has been thawed in prepared meals as quickly
as possible.
Space for freezing and
storage
Frozen food can be thawed in the following ways:
– in a fan oven,
– in a microwave oven,
– at room temperature,
– in the refrigerator: the cold given off by the frozen food is used for
cooling.
Ice maker
Safety instructions and warnings
• Theicemakerisdesignedexclusivelytomakeicecubesinquanti-
ties required by a household and may only be operated with water
suitable for this purpose.
• All repairs and work on the ice maker may only be carried out by
customer service personnel or other trained personnel.
Freezing
• Thefirstthreebatchesoficemustnotbeconsumedorused.
This applies both to using the appliance for the first time
and also to using it after it has not been used for a lengthy
period of time. This ensures that the water supply is purged.
Fresh food should be frozen to the core as rapidly as possible.
Frozen food can also be given a cold boost.This is provided by the
SuperFrost facility.
The maximum amount of food (in
kg) which can be frozen in 24 hours
is shown on the type plate ("Freez-
ing capacity"). This amount varies
according to the model and climate
rating.
• Themanufacturercannotacceptliabilityfordamagecaused
by a faulty connection to the mains water supply.
• The ice maker will only work if the combined refrigerator-freezer
is connected to the electricity supply. It will only make ice cubes
if the freezer compartment is operating.
• Ensure that the drawer is fully closed, as the ice maker can oth-
erwise not produce ice cubes.
Freezing with SuperFrost
Touch the SuperFrost icon
on.
briefly so that the
LED comes
• For small amounts of frozen food switch on SuperFrost 6 hours
beforehand. For the maximum amount (see freezing capacity on
the type plate) you will need to switch it on 24 hours beforehand.
• Then place the fresh food inside the freezer.
- The SuperFrost function switches off automatically.Depending
on the quantity of food placed in the freezer, this will normally
be between 30 and max. 65 hours. The freezing process is now
complete, the SuperFrost LED will go out.
You should not switch on the SuperFrost function:
- when placing frozen food in the freezer;
- when freezing up to approx. 2 kg fresh food daily.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Bleeding the ice maker
To ensure that the ice maker works properly, the water supply line
must be bled.
Ice maker vacation state
In case of longer vacations, the ice cube tray should be emptied.
• Touch the IceMaker icon
comes on.
• Open the top freezer drawer.
so that the IceMaker LED
By setting the ice maker into the
vacation state, the tray will
rotate down and no water
remains in the tray.
• Press the ON/OFF button on the ice
makerhousingforapprox.3seconds.
TheLEDabovethebuttonstartsflash-
ing.
The freezer drawer must be
left open so that the surface
of the tray dries up and no mould
or unpleasant odours can occur.
• Press the button again briefly. The
LED flashes more quickly.
• Closethefreezerdrawerimmediately.
The water supply valve opens for 25 seconds and pumps all the
air out of the water supply system.
• Then the ice cube tray of the ice maker must be completely
emptied. See the section Activating the ice maker vacation
state.
Activating the ice maker vacation state
Be sure the upper freezer drawer is com-
pletely closed and the ice cube bin is
installed correctly.
• Activate setup mode by touching the Su-
• Finally, clean the ice cube bin.
Ice cube bin
perFrost icon for 5 seconds.
Ice cube bin
• TouchthefreezercompartmentDownicon
until appears in the display.
• Touch the SuperFrost icon.
Switching the ice maker on
- The display reads
• Touch the IceMaker icon
so that the IceMaker LED
comes on.
or
After you start the ice maker for the first time, it may take up to
24 hours before the first ice cubes are ready.
depending on whether the ice maker is switched
on or off.
The production capacity depends on the temperature inside the
freezer compartment. The lower the temperature, the more ice
cubes can be produced over a period of time.
The ice cubes fall out of the ice maker into the ice cube bin. When
the ice reaches a certain level in the bin, the appliance stops pro-
ducing ice automatically.
• Touch the freezer compartment Down icon.
- The display reads
• Touch the SuperFrost icon.
Switching the ice maker off
- The digit flashes.
If you do not need any ice cubes, the ice maker can be switched
off independently of the freezer compartment.
The ice cube tray rotates down.
When the interior temperature appears in the display, the tray is in
the down position and the ice maker is switched off automatically.
• Touch the IceMaker icon
so that the IceMaker LED
goes out.
The ice maker can also be
switched on and off using the
ON/OFF button at the ice maker
housing.
Press the button for approxi-
mately 1 second.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Defrosting
Cleaning the dust filter
1. Disconnecttheappliancefromthemains.
2. Pullthebottomfreezerdrawerrightout.
3. Unscrew the ventilation grille.
Refrigerator compartment
Therefrigeratorcompartmentdefrostsautomatically.Thewaterthat
forms on the rear wall drains into a reservoir at the back of the ap-
plianceandevaporatesautomaticallythroughthecompressorheat.
Freezer compartment
The NoFrost system automatically defrosts the appliance.
Any moisture arising collects on the evaporator and freezes, and
is periodically defrosted and evaporated.
Cleaning
Before cleaning always switch off the appliance. Pull out the
mains plug or switch off or unscrew the fuse.
4. Pushdownthebuttononthefilter,tiltthefilterforwards
and remove.
Clean the inside, equipment and outer walls with lukewarm water
and a little detergent. Do not use abrasive or acid cleaners or
chemical solvents.
The dust filter can be washed in a dish-
washer or by hand using water and
detergent.
Do not use steam cleaners because of the risk of injury and
damage.
• Ensure that no cleaning water penetrates into the electrical com-
ponents or ventilation grille.
• Dry all parts well with a cloth.
• Do not damage or remove the type plate on the inside of the ap-
pliance. It is very important for servicing purposes.
• Use a commercially available stainless-steel cleaning agent for
5. Dry the filter and then, in reverse order, replace it.
6. Re-attach the ventilation grille.
stainless-steel appliances.
- Inordertoachievebestpossibleprotection,applyastainless-steel
care agent uniformly in grinding direction after cleaning. Points
which are darker at the start and a more intensive coloration of
the stainless-steel surface are normal.
7. Cancel the dust filter LED
in the display. See Setup mode,
= Confirm dust filter cleaning.
- Donotuseabrasivespongesorscourers,donotuseconcentrated
cleaning agents and never use cleaning agents containing sand,
chloride or acid or chemical solvents, as these would damage the
surfaces and could cause corrosion.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Malfunctions
Your appliance is designed and manufactured for a lengthy, reliable
operating life with no malfunctions. If a malfunction nonetheless
occurs during operation, check whether it is due to an operating
error. Please note that even during the warranty period the result-
ant servicing costs in this case will have to be borne by the owner.
You may be able to rectify the following faults by checking
the possible causes yourself:
Appliance does not function:
– Is the appliance switched on?
– Is the plug correctly fitted in the mains socket?
– Is the fuse intact?
Loud running noise:
– Is the appliance set up firmly on the floor?
– Does the appliance cause nearby items of furniture or objects to
vibrate? Please note that noises caused by the refrigerant circuit
cannot be avoided.
The temperature is not cold enough:
– Isthetemperaturesettingcorrect(see"Settingthetemperature")?
– Have excessive amounts of fresh food been placed in the appli-
ance?
– Doestheseparatelyinstalledthermometershowthecorrectread-
ing?
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
If none of the above causes apply
andyoucannotrectifythefaultyour-
self, contact the nearest customer
service department stating the type
designation ➊, index ➋ and appli-
ance number ➌ as indicated on the
type plate.The type plate is located
insidetheapplianceontheleft-hand
side (refrigerator).
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch
it off and disconnect the plug or switch off or unscrew the fuse.
Clean the appliance and leave the door open in order to prevent
unpleasant smells.
The appliance complies with the relevant safety regulations and
EC Directives 2004/108/EC and 2006/95/EC.
All types and models are subject to continuous improvement and
themanufacturerthereforereservestherighttomakemodifications
to the shape, equipment and technology.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|