AM/FM DIGITAL RADIO COMPACT DISC
DISC PLAYER WITH 40 SECOND ESP PLUSTM
ELECTRONIC SHOCK PROTECTION
MODEL CD-91
OPERATING INSTRUCTIONS
DIGITAL
AM/FM RECEIVER
5 AM & 5 FM PRESET STATION BUTT
PLAYS ALL MUSIC COMPACT DISCS
6 DIGIT LCD VISUAL DISPLAY
TRACK REPEAT & DISC REPEAT
40 SECOND ESP PLUSTM SYSTEM
AC ADAPTOR INCLUDED
ONS
USES 2 SIZE AA BATTERIES (NOT INCLUDED)
AUX OUT JACK - CONNECTS TO YOUR STEREO SYSTEM
(PATCH CORD NOT INCLUDED)
PLEASE READ CAREFULLY BEFORE USE
CD-91SN061799 V.1 E
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCES
Your CD player requires 2 size AA alkaline batteries (not included), or the AC Adaptor (included).
BATTERY OPERATION
1.Apply slight downward thumb pressure on Battery Door (marked open), and gently slide it in an
outward direction to open the door.
2.Insert 2 size AA fresh alkaline batteries according to + and - polarity markings inside the battery
compartment. For longer operating life, heavy duty alkaline batteries are recommended (also see
TIPS ON BATTERY USE).
3.Close the Battery Door, making sure it is snapped into place.
NOTE: If you will not use your set for one week or more, remove the batteries and unplug the AC
Adaptor from the wall outlet.
TIPS ON BATTERY USE
Reversing polarities will damage the batteries and possibly
your set. Be sure to follow + and - markings as indicated.
Do not mix different types together (Alkaline, Carbon-
Zinc, Nickel-Cadmium etc.), or old batteries with new ones.
When not in use for an extended period of time, or while
internal batteries will not be used, remove them to prevent
possible acid leakage or corrosion resulting in damage
to your player.
Bear in mind that battery life expectancy is based upon
volume and bass listening levels and if ESP PLUS circuitry
is used. Using the ESP PLUS feature consumes more
power. Maximum battery power consumption happens at
maximum settings. Typical life for 2 size AA alkaline batteries is about 8 hours of continuous use.
If the set fails to switch tracks, or if it shuts off, your batteries are weak. Replace both batteries, or
use the AC Adaptor.
When the batteries have become discharged, they must be disposed of in a safe manner that
complies with all applicable laws.
BATTERY REPLACEMENT
If the alkaline batteries are weak and discharged, this symbol
FLASHES in the display, then the
power automatically turns off. If this occurs, replace both batteries (also if display does not show
anything, batteries are dead).
This set can be used without batteries as long as the supplied AC Adaptor is connected.
NOTE: When proper power is in use, the
symbol will be steady on (not flashing).
TECHNICAL NOTE: Because of the special integrated circuits and servomotor in this set,
this set will not work with weak batteries, it will automatically shut off if
the batteries get too weak for proper operation.
BATTERY RECOVERY
When batteries get weak and cause the set to stop, if you wait about 30 minutes, the batteries will
regain a small amount of capacity and play for a few more minutes. This does not mean the set is
defective. Replace both batteries or use the AC Adaptor.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
AC ADAPTOR OPERATION
Your CD player may be powered from any household 120V AC outlet, using the adaptor included.
Insert the adaptors small connector plug into the DC 4.5V Jack marked
set, and plug the adaptor into an AC outlet.
on the rear of the
N O T E : If the AC Adaptor is connected when regular batteries are installed, the player automatically
switches to the AC Adaptor power and the batteries are not used.
CAUTION:
To prevent electric shock, do not use this AC Adaptor with an extension cord or outlet, unless it can
be fully inserted without exposing any part of the blades. Do not use any other adaptor to power this
set or you may damage your set.
NOTE: The symbol
(steady on) shows you that proper power is being supplied.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
6
7
8
5
9
4
10
11
13
3
12
2
14
1
15
16
1.CD DOOR OPEN BUTTON (SLIDE TO OPEN)
2.ESP (ELECTRONIC SHOCK PROTECTION) BUTTON
3.CD DOOR
4. 5 AM & 5 FM MEMORY PRESET BUTTONS
5.REPEAT/ENTER BUTTON
6.CD PLAY/PAUSE BUTTON / RADIO AM/FM BAND BUTTON
7.CD STOP AND POWER OFF BUTTON
8.CD BACKWARD SEARCH(SKIP) / RADIO TUNING BUTTON
9.CD AND RADIO DISPLAY
19
18
17
10.CD FORWARD SEARCH(SKIP) / RADIO TUNING BUTTON
11. RADIO MEMORY STORE BUTTON
12.PHONES JACK (headphone jack)
13.VOLUME CONTROL
14.CD/RADIO FUNCTION SWITCH
15.BASS BOOST SWITCH
16.CD PROGRAM BUTTON
17.AUX OUT JACK (FOR HOME STEREO CONNECTION)
18. AC ADAPTOR JACK
19. BATTERY DOOR
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
LISTENING WITH HEADPHONES
Connect the plug of the stereo headphones into the Phones Jack (on the
right side of set, marked PHONES).
DO NOT PLUG THE HEADPHONES INTO THE AUX OUT JACK!
CAUTION:
Hearing experts advise against exposure to continuous extended play at
loud volume levels while using headphones, possible hearing loss may
result. If you experience a ringing in the ears, reduce volume or discontinue
use. We want you to listen for a lifetime.
TO PHONES JACK
HANDLING COMPACT DISCS
This set is designed to play only compact discs bearing this identification
logo
(logo must say DIGITAL AUDIO).
Other discs may not conform to the CD standard and may not play properly.
Dirty, scratched or warped discs may cause skipping or noise.
Handle the disc only by the edges. To keep clean, do not touch its surface.
Discs should be stored in their cases after use to avoid scratches.
Do not expose discs to direct sunlight, high humidity, high temperatures,
or dust, etc. Prolonged exposure to extreme temperatures can warp
the disc (such as leaving the discs in your car during summertime).
Do not stick or write anything on either side of disc. Sharp writing
instruments, or the inks used in some felt-tip pens, may damage its surface.
CLEANING DISCS
Fingerprints should be carefully wiped from the surface of disc with a
soft cloth. Unlike conventional records, compact discs have no grooves
to collect dust and microscopic dirt, so gently wiping them with a soft
cloth should remove most particles. Wipe in a straight motion from the
center to the edge.
Never use thinner, benzine, record cleaner or antistatic spray on a
compact disc. Such chemicals can damage its plastic surface.
TO REMOVE THE DISC
Open the CD Door by sliding the Door Open Button, hold the disc by the
edge while slightly pressing on the center spindle as illustrated, then lift
it from the edge to release and remove.
NOTE
Always press the Stop Button and wait for the disc to stop rotating before
sliding the CD Door Open Button to remove the disc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PRESETTING ST
A
T
I
O
N
S
Y
S
T
A
T
I
O
N
S
(
a
f
t
e
r
y
o
u
p
r
o
g
r
a
m
m
e
d
RADIO OPERATION
1. Slide the CD/RADIO Function Switch to RADIO position.
2. Press the AM/FM Band Button to select the desired wave band.
3. Tune to desired station by pressing the Tuning Up or Down Button.
Each time the button is pressed, the frequency changes.
FM
MHz
ST ERE O
4. To search for a station quickly (automatic tuning), keep the Tuning Up or Down Button pressed
until the frequency starts to change rapidly. After tuning into a strong station, the search stops.
6. If you tune into a FM stereo station,
will show in the Display.
7. Adjust the Volume Control to your listening preference.
8. If you prefer more bass, press the Bass Boost Button.
9. To turn off the radio, slide the CD/RADIO Function Switch to CD position.
UP TO 5 AM AND 5 FM STATIONS CAN BE STORED INTO THE PRESET MEMORIES.
(THEY WILL REMAIN IN MEMORY AS LONG AS THE BATTERIES ARE INSTALLED,
OR AC POWER CORD IS CONNECTED.)
1. Slide the CD/RADIO Function Switch to RADIO position.
2. Press the Band Switch to select AM or FM band, and
press the Tuning Up or Down Button to select a station.
FM
MHz
ST ERE O
3. Press the Radio Store(Program) Buttons,
will flash in the display.
M
4. While the
is blinking, press the Radio Preset Button to choose a memory location (M1-
M
M5 BUTTON).
5. Press the Radio Store(Program) Button again to confirm. The station being received now
broadcasting is stored into that preset memory.
NOTE: Steps 2-4 should be done quickly.
6. Repeat the above steps 1 to 4 to store other 8 stations into memory.
7. Each memory location (1-5) can store 2 stations, one for AM, the other for FM.
N O T E : Before you disconnect the power (AC and Battery) of the set, make sure the Power Switch
is OFF, then you have approximately 30 seconds to re-connect the power. Otherwise, the
memories may be lost and need to be re-programmed.
TO LISTEN T
them)
O PRESET MEMOR
1. Slide the CD/RADIO Function Switch to RADIO position.
3. Press the Band Switch to select the band you want (AM or FM).
4. Press the Preset Buttons M1-M5 Button to select the stations stored (1-5) . You will receive the
station you stored into that preset memory.
5. To shut off the radio, Slide the CD/RADIO Function Switch to CD position.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
5.Adjust the Volume Control as desired.
PLAYING A DISC
6.Slide the Bass Boost Switch to ON for more
bass, OFF for less bass (BASS means low
frequency sounds like a bass drum).
1.Plug the cord from the headphones into the Phones
Jack on the right side of the set.
7.If you are using your set in a car or bumpy
location, press the ESP Button (see page 9)
(this is not needed if your set will sit on a table
or night stand).
N O T E :Display will show
, indicating that
IMPORTANT: Do not plug the headphones into the
Aux Out Jack. If you do, the sound
will be very low and the Volume
Control will not work.
2.Slide the CD Door Open Button to open the CD
Door.
OPEN
you are in ESP mode, the basket will
gradually fill.
8.To stop playing temporarily, press the Play/Pause
Button.
The elapsed playing time FLASHES in the
Display.
3.Hold the disc with the LABEL SIDE UP and
press it onto the spindle until it clicks into
place.
Press the Play/Pause Button again to
resume normal play.
9.To stop play, press the Stop Button. Total
tracks and time will appear in the Display and
after about 30 seconds the power turns off
automatically. To shut the power off quickly,
press the Stop Button twice slowly.
4.Close the CD Door (it will latch shut), press the
Play Button (Power On), the disc will begin to
spin, the display will show
total tracks and total playing time, then it will
begin playing track number 1 (song #1).
and then the
X 2
STOP
The power turns off automatically when
all tracks on a disc have been played.
The power turns off immediately when
the CD Door is opened.
The power turns off when the Stop
Button is pressed slowly twice.
NOTE:
POWER ON
Close the Door and press the Play Button.
POWER OFF
Press the Stop Button twice (please remember
to press the Stop Button before opening the
CD Door).
TRACK NUMBER
CURRENTLY
PLAYING
ELAPSED PLAYING
TIME OF THE
CURRENT TRACK
TOTAL NUMBER
OF TRACKS
TOTAL PLAYING
TIME ON THE DISC
N O T E :
1. If the Display shows
upside down or missing.
, the CD is
N O T E : If the time display flashes, your set is
in the Pause mode, press Play again
to play the disc.
2. When the symbol
Display, your batteries are weak and need
replacement.
flashes in the
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FORWARD AND REWIND TRACK SEARCH (or changing songs)
Press the Search Button (
or
) during play to go to the desired track (song).
Search FORWARD
SEARCH
Search BACKWARD
Press the Forward Search (
on the disc.
) Button to skip to the next track
+
TUNING
Press the Backward Search (
playing. Press this button twice or more to skip to previous tracks.
) Button to rewind to the beginning of the track currently
Press and hold the Search Button (
or
) during play to scan the disc at higher speed.
When the desired music section of the disc is found, release the button, normal play will resume.
If you press and hold the Search Button ( ) while the last track is playing, and the end of
the track is reached, the player stops.
BASS BOOST SWITCH
This switch enhances the low frequency (bass) sounds at low listening levels. Slide this Switch ON or
OFF to suit your taste. During bass boost ON setting, sometimes, you may hear some distortion,
adjust the Volume Control to a lower level for the best sound quality.
AUTO POWER OFF FUNCTION
The power turns off automatically when all tracks on a disc have been played or the Stop Button is
pressed. The display will show track and time for 30 seconds and then shut itself off.
The power turns off immediately when the CD Door is opened (please remember to press the Stop
Button before opening the CD Door).
IF BUTTONS DO NOT WORK
If operating buttons do not work when pressed:
1.Remove the batteries or AC Adaptor and wait a few seconds. The circuits will reset themselves.
2.Replace the batteries or AC Adaptor.
3.If the buttons still do not work, your batteries are weak, replace them or use the AC Adaptor.
REMEMBER
If the symbol
Adaptor.
flashes in the display, your batteries are weak, replace them or use the AC
If the Display is blank - no numbers show when the Play/Pause Button is pushed, the batteries are
dead. Replace them, or use the AC Adaptor (also check if you inserted the batteries according to
the + and - as shown on the back of the set).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
40 SECOND ESP PLUS SYSTEM
This set is designed with 40 second ESP (Electronic Shock Protection), PLUSTM - which allows
virtually unlimited gentle skip protection, and 40 second normal shock protection.
The ESP PLUSTM function prevents the sound from skipping by using a buffer memory that stores
music data. The new ESP PLUSTM system can store more music than normal anti-skip systems.
This new design allows gentle swaying of the set without music skipping as in walking. This set will not
work during jogging.
Press the ESP Button to turn on the ESP PLUSTM system. Press it
again to turn it off.
When the ESP PLUSTM function is switched ON or OFF during play, the
sound will be interrupted for a few seconds. This is normal.
When the ESP Button is pressed during play, the
(memory basket)
indicator will appear in the Display, the digital data equivalent to DISPLAY WITH EMPTY MEMORY
approximately 40 seconds of music is stored in the read-ahead memory
buffer before it is decoded and played.
The
mark changes to the mark, indicating that the memory
buffer (basket) is full.
When the set is subject to a shock or a bump during play, the data
stored in memory continues to be decoded and played. This gives
the pickup time to stabilize and continue reading new music. As the
DISPLAY WITH FULL MEMORY
data is used from memory, the indicator changes from to .
Once the pickup returns to its original position, new data is stored in
memory and the Display changes back to the mark.
If the set is subject to repeated shocks and all the data stored in
memory is used up, the
mark is displayed and the sound will skip
SOME MEMORY USED WHEN
THE SET IS SHOCKED
or stop for a brief period until the memory basket has time to fill up
again.
To turn off the 40 second ESP PLUSTM function, press the ESP Button
again.
Keep the digital ESP function off when using the set in a stable, no
vibration area, where it will not receive shocks. The batteries will last
longer when the ESP function is off.
NOTE:
ALL MEMORY IS
USED UP
- The music may stop if the player receives continuous shocking.
- You may hear noise or skipping if the CD is dirty or scratched.
- If during ESP play, you press Pause, or Search buttons, the memory
basket will empty itself temporarily.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT, INTRO AND RANDOM PLAY
REPEAT PLAY - SINGLE TRACK REPEAT
X 1
Plays one song over and over till you press Stop.
During play press the Repeat/Enter Button once, the symbol REPEAT
flashes in the Display.
REPEAT
/ENTER
The song currently playing will repeat over and over, until you press
Stop.
REP E AT
To stop repeat play, press the Repeat/Enter Button twice till the word
REPEAT disappears.
REPEAT PLAY - ALL TRACKS REPEAT
Repeats all songs in order, till you press Stop.
During play, press the Repeat/Enter Button twice, the symbol REPEAT
will show steady (not flashing) in the display.
X 2
REPEAT
/ENTER
All songs will keep playing in the sequence 1, 2, 3, etc. and when
finished, will start all over again untill you press the Stop Button.
REP E AT
To resume normal play, press the Repeat/Enter Button again and the
word
disappears.
INTRO PLAY
X 1
X 1
This plays the first 10 seconds of each song on the CD in sequential
order.
PROGRAM
1. During play, press the Program Button once, the word INTRO will
flash in the Display.
2. Press the Play/Pause Button, the word INTRO will stop flashing
and the first 10 seconds of each song on the CD will play and then
the set will stop.
INTRO
3. When you find a song you like, press Play, the word INTRO will go
off and that song (and the following songs) will play NORMALLY.
X 3
RANDOM PLAY
1. During play, press the Program Button three times the word
RANDOM will show in the Display.
PROGRAM
SEARCH
2. Press the Forward Skip/Search Button (
), all the songs on the
CD will play in random order selected by the CD player.
3. Press the Forward Skip/Search Button (
) to skip to the next
+
TUNING
random song.
4. To stop RANDOM play and resume normal play, press the Program
RANDOM
Button 2 times.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMED PLA
Y
PROGRAMMING YOUR PLA
Y
I
N
G
S
E
Q
U
E
N
C
E
The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you
prefer (up to 22 tracks can be programmed).
Programming Example:
2
5
3
8
4
6
4
etc.
Program Number
1
3
5
2
7
1
8
1
Track Number (song number)
etc.
1
During programming, the word PROGRAM will flash in the display. To program songs to play in your
prefered order, follow steps below:
1.Press the Program Button 2 times during play.
Program # 2 will now show in the display, ready
for your next selection of track.
The word PROGRAM
and the track number
will flash in the Display.
PRO GRAM
X 2
PRO GRAM
4.Repeat steps 2 and 3 to program other tracks
till you finish (up to 22 selections).
PROGRAM
N O T E :Do this quickly to avoid the set from
shutting itself off.
5.After programming is finished, press Play to
begin programmed play. PROGRAM stops
flashing and music begins (the Display still shows
2.Press the Skip/Search Button (
to select track number 3 (example).
or
)
PROGRAM ).
X 1
SEARCH
PRO GRAM
N O T E :
+
TUNING
The player stops automatically after all
programmed tracks have been played.
The programmed tracks are stored in memory
until the CD Door is opened (please remember
to use the Stop Button before opening the CD
Door), or after power is shut off.
3.Press the Repeat/Enter Button. Track 3 is now
programmed.
X 1
Your program memory will be lost:
When the alkaline batteries are exhausted or
removed or the AC Adaptor is disconnected.
When the power is shut off.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TO HOME STEREO SYSTEMS
The Aux Out Jack is made to accept a stereo mini plug (3.5mm). By using a commercially available
audio line cable (not included), simply connect the cables mini plug to the Aux Out Jack on your
player, and the other appropriate end usually RCA JACKS to the CD/AUX INPUTS of your home
stereo.
N O T E : Always switch the power off before making any connections between the player and any
other set.
N O T E : The Volume Control of your player becomes inoperable whenever Aux Out Jack is used.
Adjustments are made on your audio system.
TO AUX
OUT JACK
TO AUX IN JACKS
YOUR CD PLAYER
YOUR STEREO
SYSTEM
OPTIONAL CABLE
3.5mm TO RCA JACKS
CLEANING THE CABINET
Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak
solution of soapy water, and then wipe clean.
CLEANING THE LENS
A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. We suggest
using a special cleaning disk (not included) available in most music and Hi-Fi stores. However, if you
do not have one, you may use the instructions below.
You may use a cotton swab very slightly dampened with alcohol to clean the lens (start in the middle
and work you way out).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer servicing to
qualified service personnel only.
Do not insert pins or coins, clips, or any objects inside the set.
This set is equipped with a safety device which automatically turns the laser beam off when the CD
door is opened.
Do not drop the set or subject it to strong shocks. Doing so could result in damage.
Do not place the set in locations where the temperature is high, or in humid or dusty locations, or
locations with long heavy vibrations, or tilted surfaces. The anti-skip feature prevents short duration
skipping or stopping of music.
The sets cabinet may warp or the set may otherwise be damaged if it is placed in direct sunlight,
near heaters (where the temperature is 1400F/600C or higher) or in cars with the windows closed.
In the summer, the temperature may get as high as 2120F /1000C or more.
Use the set within a temperature range of 410F/ 50C to 950F / 350C.
Use ONLY the AC Adaptor provided, others may damage your set. Disconnect the Adaptor from
the wall outlet when the set is not to be used for an extended period of time (3 days or more).
When cleaning your set, use a soft dry cloth. Do not use solvents or commercially available
cleaners, as they may damage or discolor the finish.
Do not wear headphones while operating a motor vehicle. This could create a traffic hazard and is
illegal in many areas. Do not use this set when bicycling or running.
The headphones supplied with your set provide superb stereo listening while allowing you to hear
some outside sounds when listening at normally low volume levels. Listening at extremely high
volume levels minimizes the intrusion of outside noise/sounds. In the interest of safety, it is
strongly advised against the use while engaging in activities where the exclusion of external
sounds (whistles, horns, sirens, traffic, etc.) could be hazardous. Also loud volume can hurt your
ears. If you notice that the sound has become weak or distorted or if tracks do not change, this is
an indication that your batteries are low. Replace both batteries at the same time (see BATTERY
OPERATION).
Your CD-91 is identified by a serial number located in the Battery Compartment. Record this
number in the space provided below.
Model CD-91
Serial No.
Date Purchased:
This booklet contains detailed information on its safety and use. Please read it carefully so that
your may take full advantage of its many features, and ensure a safe reliable operation. Keep this
booklet for future reference.
CONDENSATION
If cold water is poured into a glass, water droplets form on the outside of the glass. This is called
condensation. Condensation may occur on internal operating parts of the lens.
Condensation occurs:
When the set is brought from the cold outdoors into a warm room, or if it is in a cold room to a room
which is heated, or in the summer, if the set is moved from an air-conditioned room or car to a hot or
humid location. Should condensation occur, the set may not operate properly.
Open the CD Door and wait for about 20 minutes (to allow the internal parts to adjust to the surrounding
temperature) before using the set.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION REQUIRED BY THE FCC
Since the CD circuitry may cause interference to other radios nearby, switch this set off when not in
use or move it away from the affected radios (or TV sets).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesirable operation.
N O T E :This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAFETY CERTIFICATION
This Compact Disc Player is made and tested to meet safety standards of the FCC requirements and
compliance with safety performance of the U.S. Department of Health and Human Services, and also
with FDA Radiation Performance Standards 21 CFR Subchapter J.
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Unauthorized recording of copyrighted material may violate laws. Do not copy songs without permission
of the copyright holder.
LASER SAFETY
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM, DESIGNED
WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE. EXPOSURE TO THIS
INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO HUMAN EYES. THIS IS A CLASS - 1
LASER PRODUCT. USE OF ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE. THIS COMPACT DISC PLAYER
SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL. THE LASER MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE)
OF A RECORD PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS
COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
Check the following guide before calling customer service.
SYMPTOMS
CAUSES
S O L U T I O N S
Replace both batteries with fresh alkaline batteries.
Battery life with fresh batteries is about 8 hours
(rechargeable batteries have 1/2 of that life).
Batteries are too weak (they
may test OK on tester, but
they are weak).
Tracks do not
change or set does
not play normally.
Dead or weak batteries.
Replace both batteries with fresh ones.
CD Player will not
turn on.
AC Adaptor not connected
properly.
Check AC Adaptor connections at the AC outlet
and the rear of set.
Disc inserted incorrectly.
Defective compact disc.
Re-insert disc with label side facing up.
Try another compact disc (scratched and dirty
discs will not play).
Disc will not play.
CD Door not closed.
Close the Door (lid) securely.
Take out the CD and leave the CD Door open for
about an hour to dry the moisture condensation.
Moisture has formed inside
the CD deck.
Headphone plug not inserted
properly.
Re-insert headphone plug into Phones Jack
(not Aux Out).
No sound from
headphones.
Volume Control set to
minimum.
Increase the volume.
Replace with fresh batteries or use AC Adaptor.
Try another compact disc.
Weak batteries.
Defective compact disc.
Volume Control
has no function
Plug headphones into Phones Jack .
(NOT THE AUX OUT JACK)
Headphones plugged into
Aux Out Jack.
Clean or replace the compact disc or clean the
lens.
The compact disc or lens is
dirty or CD is scratched.
Sound is skipping
or sound stops.
Place the CD player on a level surface that is
stable or press ESP Button.
Turn on ESP function.
Strong vibrations.
Anti-skip is off.
Lower Volume Control.
Music is too loud.
Bass Boost Switch is ON.
Sound is distorted.
Press Bass Boost Switch to OFF.
Weak batteries.
Replace both batteries or use AC Adaptor.
Remove batteries and Adaptors. Wait a few
seconds and re-insert. Make sure batteries are
fresh or Adaptor has power.
Buttons do not
work.
Electronic or static error
caused circuitry to lock.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
CD PLAYER SECTION
Frequency response ..............................
Wow and flutter ......................................
Sampling frequency ................................
D/A converter .........................................
Error correction method ..........................
Pickup ...................................................
20Hz-20kHz
Below measurable limits
44.1KHz
1-bit
CIRC
Optical 3-beam semiconductor laser
(780 nm wavelength)
Laser diode material GaAIAs
Laser output less than 44.6mw
GENERAL
Maximum output (stereo headphones) .....
Power Supply
15mW + 15mW
AC adaptor ............................................
DC .........................................................
120V/60Hz
3V: Using 2 size AA batteries
Set Dimensions (approximate)
Width ................................................
Depth ...............................................
Height ..............................................
5"
5 1/2"
1 1/8"
Weight (approximate) .............................
9.5oz. (270g) (set only)
Because our products are subject to continuous improvement, Lenoxx reserves the right to modify
product designs and specifications without notice and without incurring any obligation.
SPECIAL NOTE ABOUT BATTERIES
Fresh alkaline batteries will work for about 8 hours of continuous play.
If your set does not switch tracks or shuts down by itself, this means your batteries are weak and
cannot supply enough current.
Either replace both batteries with fresh alkaline batteries or use the AC Adaptor (or car cord).
This set has a built-in Low Battery indicator. When this symbol
flashes in your Display, both
batteries need to be replaced ( the batteries may still have some life in them, but too low for use
by a CD player). The indicator (steady on) shows you that proper power is being supplied.
N O T E : You may use rechargeable batteries on this set. However, because rechargeable batteries
generally have lower voltage (1.2 volts instead of 1.5 volts). Your playing time will be
much less than normal fresh alkaline batteries.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
We warrant this product to be free from defects in material and workmanship under normal use
for a period of 90 days after purchase and we will repair it free of charge or replace it at no charge,
should it become defective under this warranty, providing you submit proof of purchase sales slip
with the set.
During the initial 90 day period after original purchase, we will service the set that is returned
to LENOXX ELECTRONICS CORP., prepaid, at no charge. After the initial 90 day period expires,
and for a period of 12 months from original purchase, we will exchange at no charge any part that
is defective, but will charge for the cost of labor, return postage paid by Lenoxx.
This warranty does not apply to any products which have been subject to misuse, neglect or
accident. This warranty does not cover broken headphones or cabinet. UNDER NO
CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. The following charges apply to repairs beyond the warranty period: $40.00. Be
sure to pack carefully and return postage paid insured together with your money order and proof
of purchase date to :
LENOXX ELECTRONICS CORP. 2 GERMAK DRIVE, CARTERET N.J. 07008
For customer service, dial 1-800-315-5885
A.M. 9:30 - F.M.17:30 EST
© 1999 LENOXX ELECTRONICS CORP.
2 GERMARK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
17
Download from Www.Somanuals.com. All Manuals Search And Download.
QQUUIICCKK IINNSSTTRRUUCCTTIIOONNSS
QUICK INSTRUCTIONS
QQUUIICCKK IINNSSTTRRUUCCTTIIOONNSS
MODEL CD-91
POWERING UP
Power your CD player by connecting the AC Adaptor or by inserting 2 size AA fresh alkaline
batteries.
AC OUTLET
AC ADAPTOR OPERATION
BATTERY OPERATION
1. Open the Battery Door.
2. Insert 2 size AA fresh alkaline batteries as shown.
NOTE: Player will not work, and batteries will be
TO DC JACK
drained, if not inserted as shown inside the
Battery Compartment.
(4.5V)
3. Close the Battery Door.
NOTE: If the symbol
flashes in the display, your
batteries are weak and need replacement.
RADIO OPERATION
1. Slide the CD/RADIO Function Switch to the RADIO position.
2. Press the AM/FM Band Button to select the desired wave band.
3. Tune to desired station by pressing the Tuning Up or Down Button.
Each time the button is pressed, the frequency changes.
2 SIZE AA
BATTERIES
5. If you tune into a FM stereo station,
Display.
will show in the
6. To turn off the radio, slide the CD/RADIO Function Switch to CD
position.
7. To program the Preset Memory Buttons, find the station you want,
press the Store Button and then press the Preset Button (M1-M5)
to store that station into that memory Button.
TO PHONES
JACK
PLUGGING IN
Plug the headphones into the Phones Jack on the right side of
the player, and put on the headphones.
PLAYING A DISC
You can play compact discs that have this logo:
1. Slide the Open Button to open the CD Door.
2. Place a disc on the center post with the label facing up, and
then gently push down on the center of the disc until it clicks in.
3. Close the CD Door, press the Play Button, the Display tells you
how many tracks are on the disc and total playing time on the
disc, the disc will play.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
QQUUIICCKK IINNSSTTRRUUCCTTIIOONNSS
QUICK INSTRUCTIONS
QQUUIICCKK IINNSSTTRRUUCCTTIIOONNSS
BASIC FEATURES
PLAY/PAUSE BUTTON (or POWER ON)
Press Play, adjust the Volume Control and after a few seconds it will play. Pressing Play/Pause Button
while a disc is playing, will pause play. (The elapsed playing time will flash during pause.) Press Play/
Pause again to continue play.
VOLUME CONTROL
Adjust this Volume Control to your preference.
BASS BOOST
Press this Switch to ON to give you more low frequency tones.
STOP (or POWER OFF)
Press the Stop Button to stop play and shut off power (after about 30 seconds delay).
REPEAT
During play, press the Repeat/Enter Button once to repeat one song over and over, REPEAT will show
in the display. That song will play and repeat again till you press Stop.
To repeat all songs, just press the Repeat/Enter Button twice, REPEAT will be steady on.
Press the Repeat Button again to return to normal play.
SKIP/SEARCH (
or
)
During play, Press and hold the Skip/Search Buttons
backward or forward through a particular track (or song).
or
while the disc is playing to search
Press several times to skip to a later or earlier song, or to get back to the beginning of the song.
ESP
Press the ESP Button if your set is on the move or subject to vibrations. Your music will not skip or stop
when the set is shaken or vibrated for brief periods (after memory basket fills). Press this button again
to turn off the ESP function.
PROGRAMMING
To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.) you can program the set to your
taste.
Press the Program Button 2 times, press the Skip/Search Buttons (
you want, then press Enter. Repeat pressing the Skip/Search Buttons (
Enter till you finish programming, then press Play.
or
), to select the track
) and Repeat/
or
FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING INSTRUCTIONS,
SHUFFLE AND INTRO PLAY INSTRUCTIONS, PLEASE REFER TO THE
OPERATING INSTRUCTIONS BOOKLET.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
|