MODEL HT-4OO
Digital
Home Theater Audio System
Turns Your DVD Player Into a Home Theater
The Perfect Sound System for Your DVD Player
Just add your TV & DVD player; everything else is in the box.
•
Incredible surround sound, perfect for DVD viewing & enhanced TV game experience.
•
PLEASE READ CAREFULLY BEFORE USE
IB-HT400-WM-E-122502
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing this Digital Home Theater System. This deluxe audio theater system turns your home into a virtual
theater. In addition to the incredible surround sound of a 5.1 channel audio source, such as your current DVD player, this system
also superbly enhances your other audio sources, such as a CD player, VCR, or a cassette deck. The only thing you need to add
is your own TV or other devices. We have designed this system to be easy to set up, but please, review this manual before you
operate your system. Please have it handy while you are setting the system up; and keep it available for future reference, or in
the unlikely event that you encounter any unexpected questions or problems. We have tried to keep this manual as simple as
possible. It begins with how to connect the speakers, your TV, and other optional devices. It also includes instructions on how to
position the speakers for the most natural surround sound. If you follow the instructions carefully you can have the system set up
in about an hour.
This system was designed to provide you with many years of reliable operation with a minimum of care and maintenance. Every
component in your system was perfect when it left our factory. If you experience any problem with the set up or operation of this
system, please review the Trouble Shooting Guide at the end of this manual before you contact the Customer Service Department
at 1-800-315-5885.
All of the adjustable system settings have been preset at our factory for normal operation of the system. All you have to do is to
sit back and enjoy the great home theater experience.
Later on, you may want to change some of the optional settings like speaker volume and balance or equalizer (tone) settings.
Instructions for changing them, are found later in this manual.
Basic Features & Benefits of this Digital Home Theater System:
1. Dolby Digital 5.1 channel audio decoder for real theater surround sound.
2. Multi-position preset graphic equalizer for truly customized tones.
3. Digital coaxial input jack with cable included.
4. TV Game / Video Camera input Jacks on the front panel.
5. Includes audio inputs for DVD, TV / VCR, AUX and TUNER.
6. Fully customizable individual speaker level controls.
7. Powerful subwoofer provides real BOOM in your bass.
8. Automatic decoding of Dolby Digital & Dolby Pro Logic audio signals.
9. Deluxe easy-to-use remote control with batteries included.
10. Designed for easy, mistake-proof color-coded speaker setup.
NOTE:
We recommend that you use this Home Theater System with your DVD player in order to experience the true 5.1 channel sound.
However, if you do not have a DVD player, you may still use this system to get better sound from your TV set or any audio device.
THIS SYSTEM CONTAINS
HT-400
1 Subwoofer
speaker with wires
4 Satellite
Speakers
1 Remote Control
1 Main Unit
1 Center Speaker
1 Orange
Coaxial Cable
1 Yellow
Video Cable
1 set of Audio Cables
(Red & White)
2 “AAA” batteries
4 sets of
Speaker Wires
IB-HT400-WM-E-122502
2
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
• Getting Started
Safety Instructions-------------------------------------------------------------------------------------------------------------------------------------1
Introduction----------------------------------------------------------------------------------------------------------------------------------------------- 2
Location of Controls----------------------------------------------------------------------------------------------------------------------------------- 4,5
Remote Control Operation---------------------------------------------------------------------------------------------------------------------------6
• Connections
Choose Your Connection-----------------------------------------------------------------------------------------------------------------------------7
Cables Needed to Connect Components to Your Home Theater System -------------------------------------------------------- 7
Speaker system connections:
Speaker system connections---------------------------------------------------------------------------------------------------------------------- 8,9
Speaker Positioning Information------------------------------------------------------------------------------------------------------------------ 10,11
TV Connections ---------------------------------------------------------------------------------------------------------------------------------------- 12
TV + DVD Connections ----------------------------------------------------------------------------------------------------------------------------- 13
TV + VCR Connections ----------------------------------------------------------------------------------------------------------------------------- 14
TV + VCR + Satellite Receiver Connections ------------------------------------------------------------------------------------------------15
TV + TV Game Connections ---------------------------------------------------------------------------------------------------------------------- 16
TV + Video Camera Connections ----------------------------------------------------------------------------------------------------------------17
AUX IN Connections --------------------------------------------------------------------------------------------------------------------------------- 18
AM/FM Tuner Connections ------------------------------------------------------------------------------------------------------------------------ 19
Amplifier
General ----------------------------------------------------------------------------------------------------------------------------------------------------20
Test Tones -----------------------------------------------------------------------------------------------------------------------------------------------21
Volume Adjustment-------------------------------------------------------------------------------------------------------------------------------------22
• Listening Mode
Dolby Digital (AC-3) Mode --------------------------------------------------------------------------------------------------------------------------23
Listening with Stereo Headphones (not included) ---------------------------------------- ------------------------------------------------ 23
Dolby Pro Logic and Stereo Modes ------------------------------------------------------------------------------------------------------------------- 24
• Trouble Shooting------------------------------------------------------------------------------------------------------------------------25
• Specifications -------------------------------------------------------------------------------------------------------------------------------26
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
IB-HT400-WM-E-122502
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
FRONT PANEL
18 17
1
2
3
4
5
6
7
8
9
10
11
12 13 14
15
16
8. STEREO indicator - In STEREO mode, this red indicator
lights up (for 2 channel sound).
1. MAIN POWER button - Press to switch the set on or off.
NOTE: This button must be on in order to be able to use
the REMOTE control.
9. MULTI CHANNEL DECODING indicator - When the
input source is Dolby Digital, DTS or PRO LOGIC, this
blue indicator lights up (for 5.1 channel sound).
10. VOLUME indicators - These indicators light up
showing the level of the master volume.
11. MUTE indicator - In mute mode, this indicator will light.
12. VIDEO IN jack - For connection of a video signal from a
TV game or video camera (see details on Page 16 & 17).
13. AUDIO LEFT jack - Connect to the left channel audio
output of a TV game or video camera.
2. STANDBY indicator - This indicator has 2 colors: red and
green (red is standby, green is on). When the set is off
(standby), pressing the SOURCE or MASTER VOLUME
buttons on the main unit, or pressing any button on the
REMOTE CONTROL will turn the set on. The indicator will
become green. Also this indicator will flash confirming that
you pressed any button on the REMOTE CONTROL.
3. DVD indicator - For DVD sound use, press the SOURCE button
till this lights or press the DVD button on your REMOTE control.
4. TUNER indicator - For AM/FM TUNER sound use, press
the SOURCE button till this lights or press the TUNER button
on your REMOTE control.
14. AUDIO RIGHT jack - Connect to the right channel
audio output of a TV game or video camera.
5. GAME indicator - For TV GAME or VIDEO CAMERA use,
press the SOURCE button till this lights or press the GAME
button on your REMOTE control.
6. TV/VCR indicator - For TV/VCR sound use, press the
SOURCE button till this lights or press the TV/VCR button on
your REMOTE control.
7. AUX indicator - For AUX IN sound use, press the SOURCE
button till this lights or press the AUX button on your
REMOTE control.
15. MASTER VOLUME UP & DOWN control - Increases or
decreases the volume level of all speakers.
16. PHONES jack - For connecting stereo headphones.
17. REMOTE CONTROL SIGNAL sensor - Receives the
signal from the REMOTE CONTROL (Aim the REMOTE
control towards this sensor).
18. SOURCE button - Press several times to select the sound
input source you want: DVD, TUNER, GAME, TV/VCR, or AUX.
4
6
8
9
1 2 3
7
5
13
BACK PANEL
7
8
9
10 11
12
1. FRONT RIGHT SPEAKER jacks - Connect the FRONT
8. AUX AUDIO INPUT jacks - Connect to the audio
RIGHT SPEAKER to the red and black terminals.
output of a tape deck or other component.
9. TV/VCR AUDIO INPUT jacks - Connect to audio output
2. FRONT LEFT SPEAKER jacks - Connect the FRONT
of a TV or VCR.
LEFT SPEAKER to the red and black terminals.
10. DVD AUDIO INPUT jacks
-
Connect to the
3. CENTER SPEAKER jacks - Connect only the CENTER
digital (coaxial) audio output of a DVD player to have
Dolby Digital, DTS 5.1 channel surround sound.
SPEAKER to the blue and black terminals.
4. REAR RIGHT SPEAKER jacks - Connect the REAR
11. VIDEO OUT jack - Connect to your TV’s video input jack.
(If your TV has no VIDEO jack, you have to buy a VIDEO
RF MODULATOR.)
RIGHT SPEAKER to the grey and black terminals.
5. REAR LEFT SPEAKER jacks - Connect the REAR
LEFT SPEAKER to the grey and black terminals.
IMPORTANT: This jack is only used if you are connecting
a TV GAME or VIDEO CAMERA to the set.
6. SUBWOOFER SPEAKER jacks - Connect the
12. AC LINE CORD - Connect to a 120V/60Hz AC
SUBWOOFER SPEAKER to the green and black terminals.
standard wall outlet.
7. TUNER AUDIO INPUT jacks - Connect to the audio
13. DVD VIDEO IN jack - Connect to your DVD’s video out jack.
output of your AM/FM TUNER.
IB-HT400-WM-E-122502
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
1.POWER button - Switches the player from STANDBY to ON or ON to
STANDBY (if the main POWER of the set is ON).
REMOTE CONTROL
2.MUTE button - Instantly turns off the sound. Press again to restore
the sound.
3.MASTER VOLUME UP button
of all speakers.
- Press to raise the volume level
+
4.MASTER VOLUME DOWN button
- Press to lower the volume
level of all speakers.
5.GAME button - Selects the TV GAME (or VIDEO CAMERA) play mode.
2
4
6
The GAME indicator on the front panel will light.
1
3
6.TUNER button - Selects the AM/FM TUNER audio input mode. The
TUNER indicator on the front panel will light.
7.DVD button - Selects the DVD player audio input mode. The DVD
indicator on the front panel will light.
5
8.AUX button - Selects the AUXILIARY audio input mode. The AUX
indicator on the front panel will light.
7
9
8
9.TV/VCR button - Selects the TV or VCR audio input mode. The TV/
VCR indicator on the front panel will light.
10
12
13
10.STEREO button - Press to select STEREO (2 channel) listening mode,
11
19
and the STEREO indicator on the front panel will be on.
11.SURROUND button - Press to select DTS, Dolby Digital Pro Logic
5.1 channel audio listening mode. The MULTI CHANNEL DECODING
indicator will be on (sound will come out of all 6 speakers).
14
15
20
12.TEST TONE button - Press to activate the test tone function to check
whether your speakers are connected properly.
21
22
16
17
NOTE: The following 6 buttons adjust the frequency response (tones)
of your system.
13.NORMAL button - Press to select NORMAL tones listening mode.
14.CLASSIC button - Press to select CLASSIC tones listening mode.
15.JAZZ button - Press to select JAZZ tones listening mode.
23
24
18
25
16.ROCK button - Press to select ROCK tones listening mode.
17.POP button - Press to select POP tones listening mode.
18.DANCE button - Press to select DANCE tones listening mode.
HT-400
19.FRONT LEFT UP & DOWN VOLUME buttons - Press to adjust the
individual FRONT LEFT speaker’s sound level.
20.FRONT RIGHT UP & DOWN VOLUME buttons - Press to adjust the
individual FRONT RIGHT speaker’s sound level.
21.CENTER UP & DOWN VOLUME buttons - Press to adjust the
individual CENTER speaker’s sound level.
22.REAR LEFT UP & DOWN VOLUME buttons - Press to adjust the
individual REAR LEFT speaker’s sound level.
23.REAR RIGHT UP & DOWN VOLUME buttons - Press to adjust the
individual REAR RIGHT speaker’s sound level.
24.SUBWOOFER UP & DOWN VOLUME buttons - Press to adjust the
SUBWOOFER speaker’s sound level.
25.RESET button - Press to reset all speakers’ output to the factory’s
default settings.
IB-HT400-WM-E-122502
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL OPERATION
Battery Installation
Remote Control Operating Range
Remove the BATTERY COMPARTMENT DOOR of the REMOTE Point the REMOTE CONTROL unit within 20 feet from the
CONTROL and insert 2 size “AAA” alkaline batteries (included) remote control sensor and facing the front of the HOME
according to the + and
markings inside the BATTERY THEATER SYSTEM.
COMPARTMENT of the REMOTE CONTROL unit.
Gently push here and slide to
open the BATTERY DOOR.
Insert the 2 size “AAA” batteries
as shown (included).
Remember to point the
REMOTE CONTROL
in the direction of the
HOME THEATER’s
sensor, not the TV set
or the DVD player.
Remember, the spring touches the
battery.
side of each
HT-4 00
Point the REMOTE CONTROL at the
Home Theater’s Front
Make sure there is a clear path between the REMOTE
CONTROL and the HOME THEATER SYSTEM so that the signal
is not blocked.
Replace the door.
Tips on REMOTE CONTROL operation
Tips on Battery Use
The REMOTE control’s operating distance may vary
•
Reversing polarities will damage the batteries and possibly
•
according to the brightness of the room.
your REMOTE. Be sure to follow polarity + and - as indicated.
Do not point bright lights at the REMOTE CONTROL
SENSOR (like laser pointers).
•
Do not mix different types of batteries together (Alkaline,
Carbon-Zinc, Nickel-Cadmium etc.), or old batteries with new
•
ones.
Do not place objects between the REMOTE CONTROL unit
and the REMOTE CONTROL SENSOR.
•
When not in use for an extended period of time (over 60
•
days), remove the batteries to prevent possible acid leakage
or corrosion resulting in possible damage to your REMOTE
CONTROL.
Do not use this REMOTE CONTROL while simultaneously
using the remote control unit of any other equipment, the
signals may mix.
•
When the batteries have become discharged, they must be
disposed of in a safe manner that complies with all applicable
laws.
Sometimes your TV’s remote may cause an LED to flash,
you can ignore this.
•
•
Installation of batteries should only be done by an adult
(for safety).
•
IB-HT400-WM-E-122502
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Choose Your Connection
There are several ways to connect your Home Theater System. Please use the following chart to determine which
connection is the best for you. Turn to the appropriate page and connect your Home Theater System.
COMPONENTS
CABLES NEEDED GO TO ...
TV
+
NOTE:
This only applies if your
TV has audio out jacks.
• Audio (included)
Page 12
HOME THEATER
(only)
TV/DVD
+
HOME THEATER
• Video (included)
Page 13
• Coaxial (included)
TV/VCR
+
HOME THEATER
• Video (included)
• Audio (included)
Page 14
TV/VCR
+
HOME
THEATER
+
• Video (included)
Page 15
• Audio (included)
SATELLITE
TV
+
• Video
(special, not included)
HOME THEATER
Page 16,17
+
TV GAME
or
• Audio
(special, not included)
VIDEO CAMERA
TAPE RECORDER/PLAYER
AM/FM TUNER
or
other AUX
DEVICE
Page 18,19
• Audio (included)
+
HOME THEATER
Cables Needed to Connect Components to Your Home Theater System
The pictures below show the cables needed for the connections represented in this booklet.
NOTE: Audio cables are usually sold as a bundled set, but the connection sketches in this booklet show each cable separately for better
visibility. You need additional cables to connect everything shown above. Check your other equipments’ booklets to see what
cables are needed.
Red & White
Audio cables
(included, most installations
will need these)
Speaker Wires
(6 sets are included, and one set
is attached on the back of the
SUBWOOFER)
Yellow
Video cable
(included)
Orange
Coaxial cable
(included)
IB-HT400-WM-E-122502
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SYSTEM CONNECTIONS
Speaker System Connections
Connect the supplied speaker system using the supplied The speaker wires and connectors are color coded for easier
speaker cords by matching the colors of the terminals to those set up.
of the cords.
• Connect the Front Left speaker to the Front Left terminals.
• Connect the Front Right speaker to the Front Right terminals.
• Connect the Center speaker to the Center speaker terminals.
• Connect the Rear Left speaker to the Rear Left terminals.
• Connect the Rear Right speaker to the Rear Right terminals.
• Connect the Subwoofer to the Subwoofer terminals.
IMPORTANT:
Before making connections, make sure the power is off. At the rear
of each supplied speaker you will find two spring type connectors
in different colors: a black one (-) and a red, blue or gray one(+).
(The Subwoofer does not have spring type connecting tabs at the
rear, only a set of black & green speaker wires from its back.)
QUICK SETUP DIAGRAM
IMPORTANT!
This Home Theater only improves the sound of your DVD systems, it works only when your DVD’s AUDIO OUTPUT is set
to DIGITTAL mode.
NOTE
In your package you will find 6 sets of colored speaker wire pairs for connecting your Home Theater to the 6 different
speakers:
• 1 green and black pair of wires for the subwoofer which comes out of the back of the subwoofer (12 1/2 feet long).
• 2 grey and black pairs of wires (26 feet long) for connecting the rear speakers with grey and black terminals.
• 1 blue and black pair of wires (13 feet long) for the center speaker with blue and black terminals.
• 2 red and black pairs of wires (13 feet long) for the front speakers with red and black terminals.
IB-HT400-WM-E-122502
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SYSTEM CONNECTIONS
Tips for connecting the speaker wires To avoid short-circuiting the speakers
Push and hold the Speaker terminal tab down to insert each wire.
Release the tab to lock the wire into the terminal. Make sure the
wire is fully inserted, but the insulation is not covering the inserted
part of the speaker wires.
• Make sure the stripped end of each speaker wire does not
touch another speaker terminal or the stripped end of
another speaker wire.
Examples of poor connection of the
speaker wires
• Stripped speaker wire is touching another speaker terminal.
Make sure not even 1 strand of wire touches the other
wire!
• Stripped wires are touching each other due to excessive
removal of insulation. Do not allow the above to happen on
your set or speakers.
NOTE:
Be sure to match the speaker wire to the appropriate terminal on
the components: (+) to (+) (color), and (-) to (-) (black). If the wires
are reversed, the sound will be distorted and will lack some tones.
Follow the color codes of each speaker.
IB-HT400-WM-E-122502
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER POSITIONING INFORMATION
Your system is supplied with 4 compact sized satellite speakers, one
slightly larger center speaker and one large subwoofer. The satellite
speakers and the center speaker reproduce only the mid range and
higher frequencies. All of the low frequency (bass) sounds are
produced by the subwoofer. Proper positioning and placement of
the speakers is important in order to provide the best surround sound
experience. We understand that due to the size and shape of your
listening room, and the location of your furniture, you may not be
able to set up the speakers exactly as per these diagrams. However
these simple guidelines will help you maximize your home theater
experience.
Your Usual Seat
• Note the speaker levels are preset at the factory and most people
will not need to fine tune the sound of each speaker. We suggest
you skip this part at first. Later on you can adjust the sound level of
each individual speaker. See Page 22.
• Although all 4 satellites are of the same size, the speakers inside
the cabinets are different. The speaker terminals on the back of the
cabinets are color-coded, as are the speaker wires and the speaker
terminals on the back of the main unit. Refer to the connection
diagram on page 8. Be sure you are using the correct satellite
speaker in each location, front, rear and center. Please follow
the colors for best results.
POSITION ALL 5 SPEAKERS APPROXIMATELY AT THE
SAME DISTANCE FROM YOUR LISTENING POSITION.
POSITION THE SUBWOOFER AS BELOW.
• For best surround sound effects, all 4 of the satellite speakers and
the center speaker should be roughly at the same distance from
your usual listening position.
POSITION THE SPEAKERS LIKE THIS FOR OPTIMAL LISTENING EXPERIENCE
• All 4 satellite speakers and the center speaker should be placed approximately the same distance from your listening
position.
• The center speaker should be placed directly above (or below) the TV set. Left and right front speakers should be
approximately at the same height as the center speaker.
• The rear speakers should be either in line with, or behind your listening position, approximately at ear level, or slightly
above.
• The subwoofer should be on the floor near the TV, or in any corner, with the front hole facing your listening position.
• All speakers must be visible. Do not hide them behind curtains, furniture, etc, as this will affect the sound.
IB-HT400-WM-E-122502
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER POSITIONING INFORMATION
SATELLITE SPEAKERS
• The center speaker, as well as the other 4 satellite speakers,
can be positioned either vertically or horizontally.
• The left front, right front, and center speakers should be
placed at roughly the same height. The center speaker
reproduces most of the dialog spoken by the actors on the
TV screen, therefore it should be placed either directly above
or below the center of the TV set. Once you position the
center speaker, try to position the left front and right front
speakers at the same height. It is not recommended to place
any of the satellite speakers on the floor. Many people prefer
to place the center speaker horizontally above the TV set.
• The left rear and right rear speakers can be placed in line
with your listening position or behind your listening position.
Ideally they should be placed slightly above your ear level
when you are seated in your normal listening position.
• We have provided 2-way keyhole openings on the backs of
all the satellite speakers that allow the satellite speakers to
be wall mounted in either a vertical or horizontal position.
• The subwoofer will provide the most dramatic bass effects
(low frequency sounds like explosions and thunder) when it
is placed on the floor. Do not place the subwoofer on a
stand or table. The subwoofer should be placed in the front
of the room so that it is facing towards your listening position.
It can be placed on either side of the TV or even in the
corner of the room, as far away as the cable will allow. The
SUBWOOFER
bass sounds from the subwoofer are non-directional. You
will not really be able to tell where the bass is coming from.
• LONG ROOMS - In case your room is unusually long, you
may buy speaker wires from your dealer for adding wire
length to your speakers. Be careful not to allow the plus +
and minus - wires to touch each other. Use electrical tape
or plastic connectors to insulate the wires from each other.
IB-HT400-WM-E-122502
11
Download from Www.Somanuals.com. All Manuals Search And Download.
(If you don’t have a DVD player yet)
TV CONNECTIONS
Home Theater System + TV (if your TV has Audio Output jacks)
BACK OF HT-400
HOME THEATER
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
YOUR TV SET
R
RED
RED & WHITE AUDIO
CABLES (INCLUDED)
L
WHITE
AUDIO OUT
NOTE: If your TV does not have audio output jacks,
it can not be used with the surround sound
system.
If you have a cable box or satellite receiver, you
can connect the receiver AUDIO OUTPUT
directly to your TV/VCR INPUT on the back of
the HOME THEATER SYSTEM.
NOTE: On some TVs, these jacks are in the front,
or your TV may not have these jacks.
1. Connect the 5 satellite speakers and subwoofer as shown on Page 8 (or the QUICK SETUP DIAGRAM packed
with the set).
2. Insert the stereo audio cables (included) into the TV / VCR AUDIO INPUT L (left=white) and R (right=red) jacks on
the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your TV, this will
allow your TV’s sound to play through your HOME THEATER SYSTEM.
NOTE: Your TV’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the TV (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button. The sound will come out of all 5
speakers plus the subwoofer.
NOTE: On some TVs, you may have to activate the audio out jacks of your TV. See your TV’s booklet.
3. Insert the AC power cord into an AC outlet.
4. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
5. Press the SOURCE button several times till the TV/VCR indicator lights.
6. Go to Page 20 for detailed instructions.
NOTE: Your cable or antenna connection to your TV are not touched with this connection. Leave your antenna cable
to your TV as you normally would. No changes will be made to your current antenna connections.
IB-HT400-WM-E-122502
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + DVD CONNECTIONS
Home Theater System + TV + DVD Player
YOUR DVD PLAYER
NOTE: Some newer TV sets have
several VIDEO INPUT jacks. You
may use one of these for your
DVD player and the others for
connecting to the VIDEO OUT
jack. If your set is older and only
has a single VIDEO INPUT jack,
you may buy a switch box to
change video inputs from DVD to
game video out (Game), etc.
VIDEO CABLE
(INCLUDED)
COAXIAL CABLE
(INCLUDED)
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
BACK OF HT-400
HOME THEATER
VIDEO CABLE
(INCLUDED)
YOUR TV SET
NOTE: On some TVs, this
jack is in the front.
1. Insert the COAXIAL cable (included) into the DVD INPUT jack on the back of your HOME THEATER SYSTEM,
and into the DIGITAL (COAXIAL) jack on your DVD player, this will allow your DVD’s Dolby Digital audio or DTS
sound to play through your HOME THEATER SYSTEM.
NOTE: For a Dolby Digital or a DTS (5.1 channel) recorded DVD disc, the sound will come out of all 5 speakers
plus the subwoofer. For a Stereo DVD disc (2 channel), the sound will only come out of the 2 front speakers
plus the subwoofer. This set will decode and automatically play back whatever sound system was recorded
on the DVD or audio disc. To manually change stereo (2 channel) audio to Dolby Pro Logic, press the
SURROUND button. The sound will come out of all 5 speakers plus the subwoofer.
NOTE: Make sure your DVD’s AUDIO OUTPUT is set to “DIGITAL”.
2. Insert the video cable into the VIDEO OUT jack on the back of your DVD player, and into the DVD VIDEO IN jack
on the back of your HOME THEATER SYSTEM.
3. Insert the video cable into the VIDEO IN jack on your TV, and into the VIDEO OUT jack on the back of your HOME
THEATER SYSTEM.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the DVD indicator lights.
7. Make sure your DVD player is on and follow your DVD player’s instructions.
8. Go to Page 20 for detailed instructions.
NOTE: Your cable or antenna connection to your TV are not affected with this connection. Leave your antenna cable
connected to your TV as you normally would. No changes will be made to your current antenna connections.
IB-HT400-WM-E-122502
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + VCR CONNECTIONS
Home Theater System + TV + VCR
YOUR TV SET
ANTENNA CABLE
(NOT INCLUDED)
(unchanged, same as before)
YOUR VCR
CABLE OR OFF-AIR SIGNAL
(unchanged, same as before)
CONNECT ALLSPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
BACK OF HT-400
HOME THEATER
1. Insert the stereo audio cables (included) into the TV/VCR AUDIO INPUT L (left=white) and R (right=red) jacks on
the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your VCR, this will
allow your VCR’s sound to play through your HOME THEATER SYSTEM.
NOTE: Your VCR’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the VCR (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
2. Connect your VCR to your TV using a coaxial antenna cable (probably already connected), your VCR’s picture
will go to your TV through the antenna connection.
3. Connections of your other antenna cables are not changed when you add your HOME THEATER SYSTEM.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the TV/VCR indicator lights.
7. Make sure your VCR is on and follow your VCR’s instructions.
8. Go to Page 20 for detailed instructions.
IB-HT400-WM-E-122502
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + VCR + SATELLITE RECEIVER CONNECTIONS
Home Theater System + TV + VCR + Satellite
SATELLITE RECEIVER CONNECTION BOX
R
L
NOTE: No changes
are made to your
antenna cables. The
antenna connections
are the same as you
have them now.
YOUR VCR
YOUR TV SET
NOTE: On some TVs, this
jack is in the front.
BACK OF HT-400
HOME THEATER
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
1. Follow the above connection diagram and check if you have these items. If your VCR has AUDIO OUT jacks, you may
connect your VCR to your HOME THEATER as shown.
NOTE: Your VCR’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the VCR (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
2. Connect your VCR to your TV using a coaxial antenna cable (probably already connected), your VCR’s picture will go
to you TV through the antenna connection.
3. Use an antenna cable to connect the antenna output on the satellite receiver to the antenna input on the VCR the
same as you have it connected now. This HOME THEATER SYSTEM does not change any antenna connections.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the TV/VCR indicator lights.
7. Make sure your VCR is on and follow your VCR’s instructions.
8. Go to Page 20 for detailed instructions.
IB-HT400-WM-E-122502
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + TV GAME CONNECTIONS
Home Theater System + TV + TV Game
YOUR TV SET
NOTE: On some TVs, this
jack is in the front.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
BACK OF HT-400
HOME THEATER
FRONT OF HT-400
HOME THEATER
NOTE: Your TV GAME may have
a special cable for connections.
This diagram is only for
illustration.
YOUR TV GAME
1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your
HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your TV GAME, this will allow your
TV GAME’s sound to play through your HOME THEATER SYSTEM.
2. Insert the yellow video cable (included with your TV GAME) into the VIDEO IN jack on the FRONT of your HOME
THEATER SYSTEM, and into the VIDEO OUT jack on your TV GAME.
3. Insert another video cable into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the VIDEO IN
jack on your TV.
NOTE: Your TV GAME’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the TV GAME (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the GAME indicator lights.
7. Make sure your TV GAME is on and follow your TV GAME’s instructions.
8. Go to Page 20 for detailed instructions.
IB-HT400-WM-E-122502
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + VIDEO CAMERA CONNECTIONS
Home Theater System + TV + Video Camera
YOUR TV SET
NOTE: On some TVs, this
jack is in the front.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
BACK OF HT-400
HOME THEATER
FRONT OF HT-400
HOME THEATER
NOTE: Your VIDEO CAMERA
may have a special cable (with a
triple 3.5mm plug on one side)
for connections. This diagram is
only for illustrations.
YOUR VIDEO CAMERA
1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your
HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your VIDEO CAMERA, this will allow
your CAMERA VIDEO’s sound to play through your HOME THEATER SYSTEM. (NOTE: Many video cameras have
special plugs on one side to connect to your camera.)
2. Insert the video cable (included with your VIDEO CAMERA) into the VIDEO IN jack on the FRONT of your HOME
THEATER SYSTEM, and into the VIDEO OUT jack on your VIDEO CAMERA. (NOTE: Your video camera may have a
3.5mm triple jack, consult your camera’s booklet for details.)
3. Insert the video cable (included) into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the
VIDEO IN jack on your TV.
NOTE: Your VIDEO CAMERA’s sound will come out of the 2 front speakers plus the subwoofer since the default
setting for the sound output is the same as the audio source from the VIDEO CAMERA (2 channel,
STEREO). For “Dolby Pro Logic” (5.1 channel) sound reproduction, press the SURROUND button. The sound
will come out of all 5 speakers plus the subwoofer.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the GAME indicator lights. (This setting is either for a Video Camera or a
TV Game.)
7. Make sure your VIDEO CAMERA is on and follow your VIDEO CAMERA’s instructions.
8. Go to Page 20 for detailed instructions.
IB-HT400-WM-E-122502
17
Download from Www.Somanuals.com. All Manuals Search And Download.
AUX IN CONNECTIONS
BACK OF HT-400
HOME THEATER
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
YOUR TAPE RECORDER / PLAYER
YOUR CD PLAYER
NOTE: Cable requires 3.5mm
stereo plug on one side
of some sets.
Illustration is showing some possible connections. You can only connect ONE of these components
to the AUX INPUT jacks of your HOME THEATER SYSTEM (AUX stands for Auxiliary).
•
•
You can hear the sound of any one of these devices through your HOME THEATER SYSTEM if you
connect the proper cables.
1. Insert the audio cables into the AUX OUTPUT L (left=white) and R (right=red) jacks of your stereo system, such
as a TAPE RECORDER/PLAYER, CD PLAYER into the corresponding AUX INPUT AUDIO jacks on your HOME
THEATER. This will enable you to hear your components system through your HOME THEATER SYSTEM.
NOTE: Your audio device’s sound will come out of the 2 front speakers plus the subwoofer since the default
setting for the sound output is the same as the audio source from the device (2 channel, STEREO). For
“Dolby Pro Logic” (5.1 channel) sound reproduction, press the SURROUND button. The sound will
come out of all 5 speakers plus the subwoofer.
NOTE: If the signal of your device (such as a CABLE/SAT BOX or some STEREO TVs) is not a true STEREO
signal, even though it has stereo output jacks, when you press the SURROUND button, the sound
may not come out from all 5 speakers. This is normal.
2. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
3. Press the SOURCE button several times till the AUX indicator lights.
4. Make sure your AUX IN component is on and follow your component’s instructions.
5. Go to Page 20 for detailed instructions.
IB-HT400-WM-E-042503
18
Download from Www.Somanuals.com. All Manuals Search And Download.
AM / FM TUNER CONNECTIONS
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
BACK OF HT-400
HOME THEATER
YOUR AM / FM TUNER
1. Insert the audio cables into the AUX OUTPUT L (left=white) and R (right=red) jacks on the back of your AM/FM
TUNER, and into the corresponding TUNER INPUT AUDIO jacks on the back of your HOME THEATER. This will
enable you to hear your stereo AM/FM TUNER through your HOME THEATER SYSTEM.
NOTE: Your AM/FM TUNER’s sound will come out of the 2 front speakers plus the subwoofer since the default
setting for the sound output is the same as the audio source from the AM/FM TUNER
(2 channel, STEREO). For “Dolby Pro Logic” (5.1 channel) sound reproduction, press the SURROUND
button. The sound will come out of all 5 speakers plus the subwoofer.
2. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
3. Press the SOURCE button several times till the TUNER indicator lights.
4. Make sure your AM/FM TUNER is on and follow your AM/FM TUNER’s instructions.
5. Go to Page 20 for detailed instructions.
IB-HT400-WM-E-122502
19
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFIER
General
1
Press the POWER button on the front panel of the main unit to turn the main
power on, press SOURCE or MASTER VOLUME buttons on the main unit,
or any button on the REMOTE control to turn the set on. Make sure the
STANDBY indicator is lit in green.
NOTE: The STANDBY indicator has 2 colors: red and green (green is on, red
6
is standby). When the set is off (standby), pressing the SOURCE or
MASTER VOLUME buttons on the main unit, or pressing any button
on the REMOTE CONTROL will turn the set on. The indicator will
become green. Also this indicator will flash confirming that you
pressed any button on the REMOTE CONTROL.
2
2
3
Press the SOURCE button on the front panel of the main unit repeatedly to
select one of the input sources, or press the individual DVD, TUNER, GAME,
TV/VCR or AUX buttons on the REMOTE to select the audio input source
directly, the corresponding indicator will light.
4
5
3
For volume adjustments, press each individual speaker’s volume control
buttons:
+ raises the volume
lowers the volume
Follow this step to adjust the other
speakers as well. Or you may press
the MASTER VOLUME buttons to raise
HT-400
For details, see page 22.
or lower all speakers’ volumes at the
4 same time.
To select the listening mode, press the SURROUND or STEREO button on
the REMOTE CONTROL.
NOTE: This set will decode and automatically play back whatever
sound system was recorded on the DVD or audio disc. For a
Dolby Digital or a DTS (5.1 channel) recorded DVD disc, the
blue MULTI CHANNEL DECODING indicator will be on and sound
will come out of 5 speakers plus the subwoofer. For a Stereo DVD
disc (2 channel) or other stereo audio source, the red STEREO
indicator will be on, and the sound will only come out of the 2
front speakers plus the subwoofer. To manually change a
stereo (2 channel) disc to Dolby Pro Logic, press the
SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
5
6
For different graphic equalizers (tone selections), press
the NORMAL, CLASSIC, JAZZ, ROCK, POP or
DANCE buttons on the REMOTE to select the tones
(frequency response) you like best. This is the pre-set
graphic equalizer.
To momentarily shut off the sound, press the MUTE
button. The red MUTE indicator will light. Press the
MUTE button again or press the MASTER VOLUME
button to restore the sound.
IB-HT400-WM-E-122502
20
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFIER
Test Tones
You can check whether your speakers are connected correctly by using
the TEST TONE button.
1
Press the POWER button on the front panel of the main unit to turn the main
power on, press SOURCE or MASTER VOLUME buttons on the main unit,
or any button on the REMOTE control to turn the set on. Make sure the
STANDBY indicator is lit in green.
2
2
3
Press the TEST TONE button on the REMOTE.
You will hear a test tone (actually some blank noise similar to a steady
ocean wave) from the FRONT LEFT (FL), CENTER (C), FRONT RIGHT
(FR), REAR RIGHT (RR) and REAR LEFT (RL) speakers in sequence
when the set is in MULTI CHANNEL DECODING mode (the blue MULTI
CHANNEL DECODING indicator is on). The VOLUME indicators on the
front panel will show the corresponding speaker which is being tested.
4
NOTE: If the set is in STEREO mode (the red STEREO indicator is ON),
you will only hear a test tone from the FRONT LEFT (FL) and
FRONT RIGHT (FR). To change the set from STEREO to MULTI
CHANNEL DECODING mode, press the SURROUND button on
the REMOTE.
HT-400
(RR)
(FL) (C) (FR)
(RL)
RESET BUTTON
Pressing this button on the remote
control will reset all 5 satellite
speakers and the subwoofer to
their default setting and will also
reset the preset graphic equalizer
to the normal position.
NOTE: The (FL), (C), (FR), (RR) & (RL) letters are not shown on the front
panel of your set.
NOTE: You can stop the test tone by pressing any button on the
REMOTE control, or press the SOURCE or MASTER
VOLUME buttons on the main unit.
4
After your test, you may play the theater system or adjust the individual
volume controls while playing any music or movie and then retest the
levels if you like. You may then adjust each speaker’s volume level by
pressing the VOLUME controls of the individual speakers, so that from your
center listening position, they all have approximately the same sound level.
To restore all speaker levels to their defaults, press the RESET button.
IB-HT400-WM-E-122502
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFIER
Volume Adjustment
1
To adjust the master volume
(Change all the speakers’ volume settings at the same time), press the
MASTER VOLUME buttons on the main unit or on the REMOTE to
decrease or increase the master volume level.
+ raises the volume
lowers the volume
The VOLUME indicator on the front panel will show the corresponding vol-
ume level as progressively lit LED lamps:
1
Factory’s default setting for volume level
2
Minimum volume level
Maximum volume level
HT-400
2
To adjust the individual speaker’s volume:
+
Press the FRONT LEFT VOLUME CONTROL
or
button on the
REMOTE to adjust the sound level of the FRONT LEFT SPEAKER.
Do the same to adjust the volume of the other individual speakers: FRONT
RIGHT SPEAKER, CENTER SPEAKER, REAR LEFT SPEAKER, REAR
RIGHT SPEAKER and SUBWOOFER SPEAKER.
NOTE: Every time you turn the set on, the
MASTER VOLUME will go back to
the factory’s default setting; and
whenever you press the SOURCE
button on the main unit or one of the
source buttons on the REMOTE
control (DVD, TUNER, GAME,
TV/VCR or AUX), the MASTER
VOLUME will go back to the factory’s
default setting. This avoids sunden
very loud sounds form startling you.
The default volume control
Increased volume level
Decreased volume level
IB-HT400-WM-E-122502
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING MODE
Dolby Digital (AC-3) Mode
Dolby Digital (also known as AC-3 or Dolby 5.1) surround sound system
delivers a realistic and dynamic sound similar to the latest movie theaters. All
five speakers and subwoofer must be connected for correct Dolby Digital
Surround Sound reproduction. Each channel plays its own unique role in
providing the proper sound. Front left, center and front right speakers join rear
left and rear right to reproduce high, mid and bass frequencies in seperate five
full-range channels of surround sound. Bass rumble, explosions and low
frequency effects you feel are heard through the subwoofer. Most DVD movie
discs have been recorded in Dolby Digital surround sound mode. This set will
automatically select the correct Dolby mode according to source provided.
1
1
Press the SOURCE button on the front panel of the main unit repeatedly to
select one of the input source, or press the DVD, TUNER, GAME, TV/VCR
or AUX button on the REMOTE to select your required audio input source
directly. The corresponding indicator will light.
2
NOTE: This set will decode and automatically play back whatever
sound system was recorded on the DVD or audio disc. For a
Dolby Digital or a DTS (5.1 channel) recorded DVD disc, the
blue MULTI CHANNEL DECODING indicator will be on and sound
will come out of 5 speakers plus the subwoofer. For a Stereo DVD
disc (2 channel) or other stereo audio source, the red STEREO
indicator will be on, and the sound will only come out of the 2
front speakers plus the subwoofer. To manually change a
stereo (2 channel) disc to Dolby Pro Logic, press the
SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
HT-400
Listening with Stereo Headphones
(not included)
2
Press the SURROUND button on the REMOTE control to select 5.1
channel sound format. Press the STEREO button to select the stereo mode.
YOUR STEREO
HEADPHONES
NOTE: If the input signal is Dolby Digital sound format, then two listening
modes can be selected: Dolby Digital or STEREO. Try each to
see what you prefer. Some programs may sound better in the
STEREO mode.
TO PHONES
(optional,
JACK
not included)
A. If a Dolby Digital sound input signal is received, the MULTI CHANNEL
DECODING indicator will be on. Sound will come out of all 6 speakers.
When you are playing your set in MULTI CHANNEL
DECODING mode, if you plug your stereo
headphones into the phones jack, the set will turn to
STEREO mode automatically (the STEREO
indicator on the front panel will light), and you can
hear the 2 channel stereo sound coming out of your
stereo headphones, no sound will be heard from the 6
speakers (there may be a 2 second delay for the
circuits to detect and change to headphone use).
B. If a stereo sound signal is received from TUNER or AUX, etc., the
STEREO indicator will be on. Sound will come out of 2 front speakers
plus the SUBWOOFER.
IB-HT400-WM-E-122502
23
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING MODE
Dolby Pro Logic and Stereo Modes
The Dolby Pro Logic surround system is a specially encoded two-channel
analog format that will produce sound through four speaker channels (front
left, center, front right, mono surround). This is also compatible with stereo
systems, but the user will only have two-channel (front left & right) sound.
Most currently released DVDs, video cassettes and audio compact discs
and many TV broadcasts are encoded with Dolby Pro Logic. Audio discs
and tuner broadcasts are in Stereo. This set will automatically select Dolby
Digital or Dolby Pro Logic for you according to the source provided.
1
Press the SOURCE button on the front panel of the main unit repeatedly to
select one of the audio input sources, or press the DVD, TUNER, GAME,
TV/VCR or AUX button on the REMOTE to select directly your required
audio input source. The corresponding indicator will light.
1
2
NOTE: This set will decode and automatically play back whatever
sound system was recorded on the DVD or audio disc. For a
Dolby Digital or a DTS (5.1 channel) recorded DVD disc, the
blue MULTI CHANNEL DECODING indicator will be on and sound
will come out of 5 speakers plus the subwoofer. For a Stereo DVD
disc (2 channel) or other stereo audio source, the red STEREO
indicator will be on, and the sound will only come out of the 2
front speakers plus the subwoofer. To manually change a
stereo (2 channel) disc to Dolby Pro Logic, press the
SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
HT-400
2
Press the SURROUND button on the REMOTE control to select Dolby Pro
Logic format (or automatic decoding). Press the STEREO button to select
the stereo mode.
NOTE: If the input signal is Dolby Pro Logic format, then two listening
modes can be selected: Dolby Digital or STEREO.
A. If a Dolby Digital sound input signal is received, the MULTI CHANNEL
DECODING indicator will be on. Sound will come out of all 6 speakers.
B. If a stereo sound signal is received from TUNER or AUX, etc., the
STEREO indicator will be on. Sound will come out of 2 front speakers
plus the SUBWOOFER.
IB-HT400-WM-E-122502
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Remedy
Symptom
1. Is the power cord firmly plugged into the power outlet? Insert the AC power
plug securely into the power outlet. Make sure your outlet has power, you
can check this by plugging a lamp into the outlet to see if works.
No power
2. One of the safety mechanisms may be operating. In this event, unplug the
player from the power outlet briefly and then plug it in again to reset the set.
Make sure your DVD’s video cable is pluggged into your TV set. This Home
Theater only improves the sound of your DVD player, it does not affect the
video at all.
Your DVD player has no picture
1. Check that the speakers and components are connected securely and
correctly (see Page 8, 9). Also check speaker volume (see Page 22).
2. Make sure your source (DVD or other) is plugged in and operating. Also
check that component’s booklet, maybe you need adjust that component.
3. Make sure that you have selected the correct source on the system (DVD or other).
4. Ensure that the input settings for the TV and stereo system are correct.
5. Adjust the master volume settings on the HOME THEATER’s remote.
6. Ensure the MUTE button is not pressed on the HOME THEATER remote (If
yes, press the MUTE button again, the MUTE indicator will go off).
No sound or only a very low-level
sound is heard.
Distorted sound.
•
•
7. The audio or speaker connecting wires are damaged. Replace them with new ones.
1. Check if the batteries are installed with the correct polarities ( + and
2. If the batteries are weak or dead, replace them with new ones (size “AAA”).
3. Point the remote control unit at a distance of less than 20 feet from the main
unit of the HOME THEATER system.
).
The REMOTE CONTROL unit does not
work.
4. Remove any obstacles between the remote control unit and remote control
sensor.
5. If the battery terminals are dirty or corroded, clean them with sandpaper.
Press the POWER button on the MAIN UNIT to turn the set ON. Then press the
POWER button on the REMOTE. The HOME THEATER may not be operating
properly due to lightning, static electricity, or some other external factors. Reset
the player by disconnecting the power plug and then re-connecting it before
calling customer service.
No buttons operate (on the main unit
and / or the REMOTE CONTROL unit).
Humming noise is heard even if the set
stopped.
This is a normal sound the cooling fan inside makes. This will stop if the power is
off. Press the POWER button on the REMOTE to put the set in STANDBY mode.
1. Check that the speakers and components are connected correctly and securely.
2. Adjust front balance by pressing the volume controls of the left and right
speakers on the REMOTE (see Page 22).
The left and right sounds are unbalanced
or reversed.
1. Check that the speakers and components are connected securely.
2. Insert all wires firmly, follow the setup pages starting on Page 7.
Loud hum or noise is heard.
The surround effect is difficult to hear when
playing a Dolby Digital sound track.
Depending on the digital sound input, the output signal may at times be monaural
or stereo even if the main sound track is recorded in Dolby Digital format.
The sound comes from the 2 front
speakers and subwoofer only.
The input audio siginal is stereo. This set will decode and automatically play
back sound in the format that was originally input. This is normal.
During DVD play, the STEREO
indicator is on.
If your DVD disc was recorded with PCM, this is normal. Press the SURROUND
button.
1. Make sure the Center speaker’s volume is set to a normal level (see Page 22).
2. Adjust the center speaker volume by pressing the volume control buttons of
the center speaker on the REMOTE (see Page 22).
No sound is heard from the center
speaker.
3. If you are listening to a stereo broadcast, only 2 front speakers (plus the
subwoofer) will have sound.
1. Make sure the volume control of the rear speakers are set to normal levels
(see Page 22).
2. Adjust the rear speakers’ volume by pressing the VOLUME control buttons
on the REMOTE.
No sound or only a very low-level
sound is heard from the rear speakers.
Double check if input & output jacks were inserted properly. Also ask a friend to
help you before calling customer service.
The system does not operate properly.
Slight delay when switching from DVD
to TUNER input.
This is normal, as the set tries to detect stereo or 5.1 channel signals.
IB-HT400-WM-E-122502
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
Power requirements ----- AC 120V, 60Hz
Power consumption ------100W
Main Unit Dimensions ---17 x 11 x 1 7/8 inches / 43.0 X 28.0 X 4.8 cm
Weight ---------------------- 12.7 lbs / 5.76 kg
Audio Power Outputs
Total output power: 200 Watts at Maximum
Distortion
0.06% @ reference output
Audio Line Outputs
Audio L/R: 1 Vrms, 1 kilohms
Remote Operating Range
Within 20 feet between the main unit and the remote.
Speakers
Subwoofer ------------------Dimensions: 12 x 7 7/8 x 13 inches / 307 X 199 X 329 mm
Weight: 10 lbs / 4.6 kg
Front Left ------------------- Dimensions: 4 x 3 5/8 x 5 1/2 inches / 100 X 93 X 140 mm
Weight: 1 lb / 0.47 kg
Center ----------------------- Dimensions: 4 x 6 5/8 x 3 3/4 inches / 100 X 170 X 95 mm
Weight: 1.1 lb / 0.5 kg
Front Right ----------------- Dimensions: 4 x 3 5/8 x 5 1/2 inches / 100 X 93 X 140 mm
Weight: 1 lb / 0.47 kg
Rear Left ------------------- Dimensions: 4 x 3 5/8 x 5 1/2 inches / 100 X 93 X 140 mm
Weight: 0.88 lb / 0.4 kg
Rear Right ----------------- Dimensions: 4 x 3 5/8 x 5 1/2 inches / 100 X 93 X 140 mm
Weight: 0.88 lb / 0.4 kg
LENOXX reserves the right to make design and specification changes for product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT
ON A SURFACE WITH A NATURAL OR LACQUER FINISH.
For customer service of this Durabrand product
Visit Our Website: http://www.lenoxx.com
or Dial 1-800-315-5885 (MONDAY-THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
or Write to:
LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
© 2002 LENOXX ELECTRONICS CORP.
MADE & PRINTED IN CHINA
IB-HT400-WM-E-122502
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|