MODEL HT-391
Home Theater Sys tem
Turns Your DVD Player Into a 5.1 Channel
Home Theater Surround Sound Sys tem
The Perfect Sound Sys tem for Your DVD Player
Just add your TV & DVD player; everything else is in the box.
•
Incredible surround sound, perfect for DVD viewing & enhanced TV game experience.
•
Also provides superior sound for computer system
•
PLEASE READ CAREFULLY BEFORE USE
IB-HT391-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you forpurchasing this 5.1 ChannelHome Theater Surround Sound System. This deluxe audio theater system turns your
home into a virtual theater. In addition to the incredible surround sound of a 5.1 channel audio source, such as your current DVD
player, this system also superbly enhances your other audio sources, such as a CD player, computer, VCR, or a cassette deck.
The only thing you need to add is your own TV or other devices. We have designed this system to be easy to set up, but please,
review this manual before you operate your system. Please have it handy while you are setting the system up; and keep it
available for future reference, or in the unlikely event that you encounter any unexpected questions or problems. We have tried
to keep this manual as simple as possible. It begins with how to connect the speakers, your TV, and other optional devices. It also
includes instructions on how to position the speakers for the most natural surround sound. If you follow the instructions carefully
you can have the system set up in about an hour.
This system was designed to provide you with many years of reliable operation with a minimum of care and maintenance. Every
component in your system was perfect when it left our factory. If you experience any problem with the set-up or operation of this
system, please review the Trouble Shooting Guide at the end of this manual before you contact the CustomerService Department
at 1-800-315-5885.
All of the adjustable system settings have been preset at our factory for normal operation of the system. All you have to do is to
sit back and enjoy the great home theater experience.
Later on, you may want to change some of the optional settings like speaker volume and balance settings. Instructions for
changing them, are found later in this manual.
Basic Features & Benefits of this 5.1 Channel Home Theater System:
1. 5.1 channel audio decoder for home theater surround sound.
2. TV Game / Video Camera input jacks.
3. Includes audio inputs for DVD, AUX and GAME/CAMERA.
4. Customizable speaker level controls with indicators.
5. Powerful subwoofer provides real BOOM in your bass.
6. Deluxe easy-to-use remote control with batteries included.
7. LED indicators for DVD, AUXILIARY or GAME functions.
8. Designed for easy, mistake-proof color-coded speaker setup.
9. Compatible with computer sound system.
THIS SYSTEM CONTAINS
5 Satellite Speakers
1 Main Set (Subwoofer)
1 Remote Control
2 “AAA” batteries
1 Set of Audio cables with green
3.5mm plugfor Computer
Connection (or other Source
with 3.5mm Jack)
1 Yellow
Video Cable
1 Spare
Fuse
1 Set of Audio Cables
for DVD or AUX IN
(Red & White)
IB-HT391-WM-E-073003
2
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
• Getting Started
Safety Instructions-------------------------------------------------------------------------------------------------------------------------------------1
Introduction----------------------------------------------------------------------------------------------------------------------------------------------- 2
Location of Controls----------------------------------------------------------------------------------------------------------------------------------- 4,5
RemoteControl Operation---------------------------------------------------------------------------------------------------------------------------6
• Connections
ChooseYour Connection-----------------------------------------------------------------------------------------------------------------------------7
Cables Needed toConnect Components to Your Home TheaterSystem -------------------------------------------------------- 7
Speakersystem connections:
Speaker system connections----------------------------------------------------------------------------------------------------------------------8,9
Speaker Positioning Information------------------------------------------------------------------------------------------------------------------10,11
TVConnections ----------------------------------------------------------------------------------------------------------------------------------------12
TV+ DVDConnections ----------------------------------------------------------------------------------------------------------------------------- 13
TV+ VCRConnections ----------------------------------------------------------------------------------------------------------------------------- 14
TV +VCR + Satellite Receiver Connections ------------------------------------------------------------------------------------------------15
TV + TV Game Connections ----------------------------------------------------------------------------------------------------------------------16
TV + Video CameraConnections ----------------------------------------------------------------------------------------------------------------17
AUX INConnections --------------------------------------------------------------------------------------------------------------------------------- 18
AM/FM TunerConnections ------------------------------------------------------------------------------------------------------------------------ 19
ComputerSound Connections -------------------------------------------------------------------------------------------------------------------- 20
Amplifier in Main Unit
General----------------------------------------------------------------------------------------------------------------------------------------------------21
Volume Adjustment-------------------------------------------------------------------------------------------------------------------------------------22
• Listening Mode
5.1Channel and Stereo Modes ------------------------------------------------------------------------------ ------------------------------------23
• Trouble Shooting------------------------------------------------------------------------------------------------------------------------24
• Specifications -------------------------------------------------------------------------------------------------------------------------------25
IB-HT391-WM-E-073003
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
1. ON / STANDBY button - Press to switch the set to on orto standby mode.
FRONT OF MAIN SET (SUBWOOFER)
2. INPUT SOURCE button - Press several times to select the sound input
source you want: DVD, AUX or GAME.
3. SPEAKER CHANNELS button - Press to select 2 channel or 5.1
channel listening mode.
4. VOLUME UP button - Increases the volume level of all speakers.
5. VOLUME DOWN button - Decreases the volume level of all speakers.
6. REMOTE SENSOR - Receives the signalfrom the REMOTE CONTROL
(aim the REMOTE control towards this sensor).
7. STANDBY indicator - This indicator has 2 modes:flashing and steadily
on (slow flashing indicates the setis in standby, steadily on indicates the
set is on). When the set is off (standby), pressing the ON/STANDBY
button on the main set or on the REMOTE CONTROL will turn the set on,
the indicator will become steadily on.
6
7
8
1
2
3
4
5
NOTE: The rear main power switch must be ON.
9
10
8. DVD indicator - For DVD sound use, press the INPUT SOURCE button
on the main set till this lights or press the SOURCE button on your
REMOTE control till this lights.
11
12
13
9. AUX indicator - For AUX IN sound use, press the INPUT SOURCE
button on the main set till this lights or press the SOURCE button on your
REMOTE control.
14
10. GAME indicator - For TV GAME or VIDEO CAMERA use, press the
INPUT SOURCE button on the main set till this lights or press the
SOURCE button on your REMOTE control.
11. 2 CHANNEL indicator - When the listening mode is 2 channel, this
indicatorwill lightup. To change, press the SPEAKER CHANNELS button.
12. 5.1 CHANNEL indicator - When the listening mode is 5.1 channel, this
indicator will light up. To change, press the SPEAKER CHANNELS button.
13. VOLUME MAX. indicator - This indicator lights up when the MASTER
VOLUME is at its maximum level, also it will flash confirming you
pressed the VOLUME UP button of
either the SUBWOOFER, or
BACK OF MAIN SET (SUBWOOFER)
CENTER, or REAR, or the MASTER.
14. VOLUME MIN. indicator - This indicator lights up when the MASTER
VOLUME is at its minium level, also it will flash confirming you pressed
the VOLUME DOWN button of either the SUBWOOFER, or CENTER,
or REAR, or the MASTER.
15
16
17
15. DVDAUDIOINPUTjacks-Connectto the audio output of a DVD player
to have 5.1 channel surround sound.
16. AUX INPUT jack - Connect to the audio output of a tape deck or other
component’s output.
17. GAME AUDIO INPUT jacks - Connect to the audio output jack of a TV
game or video camera.
18. VIDEO INPUT jack - For connection of a video signal from a TV
game, or video camera, or other source.
18
19
19. VIDEO OUT jack - Connectto your TV’s video inputjack. (If yourTV has
no VIDEO jack, you have to buy a VIDEO RF MODULATOR.)
20. FRONT RIGHT SPEAKER jacks - Connectthe FRONTRIGHT SPEAKER
to the red and black terminals.
20
20
21
22
21
22
23
24
23
24
21. FRONT LEFT SPEAKER jacks - Connect the FRONT LEFT SPEAKER
to the red and black terminals.
22. CENTER SPEAKER jacks - Connectonly the CENTER SPEAKER to the
blue and black terminals.
23. REAR RIGHT SPEAKER jacks - Connectthe REAR RIGHT SPEAKER
to the grey and black terminals.
24. REAR LEFT SPEAKER jacks - Connect the REAR LEFT SPEAKER
to the grey and black terminals.
26
27
25
25. POWER switch - Press to power the seton or off.
NOTE: This switchmust be ON in orderto be able touse the ON/STANDBY
button on the front of the main set or onthe REMOTE CONTROL.
26. FUSE HOLDER with screw cover.
27. AC LINE CORD - Connectto a 120V/60Hz AC standard wall outlet.
IB-HT391-WM-E-073003
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
1. IR DIODE - Sends the signal to the set. Do not block or cover this.
2. ON/STANDBY button - Switches the player from STANDBY to ON
or ON to STANDBY (if the main POWER of the set is ON).
3. SOURCE button - Press to select the sound input source you want:
DVD, AUX or GAME.
REMOTE CONTROL
1
4. RESET button - Press to adjust all speakers’ output to the factory’s
default settings.
5. MUTE button - Instantly turns off the sound. Press again to restore the
sound.
2
6. SPEAKER CHANNELS button - Press to select 2 channel or 5.1
channel listening mode.
7. SUBWOOFER UP & DOWN VOLUME button - Press to adjust the
individual SUBWOOFER’s sound level.
8. CENTER UP & DOWN VOLUME button - Press to adjust the
individual CENTER speaker’s sound level.
5
6
3
4
9. REAR button - Press to adjustthe REAR LEFT/RIGHT speakers’sound
level.
10. MASTER VOLUME UP & DOWN button - Press to adjust the sound
level of all speakers.
7
9
8
SEE NEXT PAGE FOR REMOTE CONTROL BATTERY INSTALLATION.
10
IB-HT391-WM-E-073003
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL OPERATION
Battery Installation
Remote Control Operating Range
Remove the BATTERY COMPARTMENT DOOR ofthe REMOTE Point the REMOTE CONTROL unit within 20 feet from the
CONTROL and insert 2 size “AAA” alkaline batteries (included) remote control sensor and facing the front of the HOME
according to the + and
markings inside the BATTERY THEATER SYSTEM.
COMPARTMENT of the REMOTE CONTROL unit.
Gently push here and slide to
open the BATTERY DOOR.
Slide door
down.
Insert 2 size “AAA” batteries
as shown (included).
Remember to point the
REMOTE CONTROL in
thedirection of the HOME
THEATER’s sensor, not
the TV set or the DVD
player.
Remember, the spring touches the
battery.
side of each
Replace the door.
Point the REMOTE CONTROL at the
Home Theater’s Front
Make sure there is a clear path between the REMOTE
CONTROL and the HOME THEATER SYSTEM so that the
signal is not blocked.
Tips on Battery Use
Reversing polarities will damage the batteries and possibly
your REMOTE. Be sure to follow polarity and as indicated.
Do not mix different types of batteries together (Alkaline,
Carbon-Zinc, Nickel-Cadmium etc.), or old batteries with new
ones.
•
•
Tips on REMOTE CONTROL operation
The REMOTE control’s operating distance may vary
•
•
•
•
according to the brightness of the room.
Do not point bright lights at the REMOTE CONTROL
SENSOR (like laser pointers).
When not in use for an extended period of time (over 60
days), remove the batteries to prevent possible acid leakage
or corrosion resulting in possible damage to your REMOTE
CONTROL.
•
Do not place objects between the REMOTE CONTROL unit
and the REMOTE SENSOR.
Do not use this REMOTE CONTROL while simultaneously
using the remote control unit of any other equipment, the
signals may mix.
When the batteries have become discharged, they must be
disposed of in a safe manner that complies with all applicable
laws.
Installation of batteries should only be done by an adult
(for safety).
•
•
Sometimes your TV’s remote may cause an LED to flash,
you can ignore this.
•
IB-HT391-WM-E-073003
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Choose Your Connection
There are several ways to connect your Home Theater System. Please use the following chart to determine which
connection is the best for you. Turn to the appropriate page and connect your Home Theater System.
CABLES
NEEDED
COMPONENTS
GO TO ...
TV
NOTE:
+
• Audio (included) Page 12
This only applies if your
HOME THEATER
(only)
TV has audio out jacks.
TV/DVD
+
• Video (included)
Page 13
• Audio (included)
HOME THEATER
• Video (included)
• Audio (included)
TV/VCR
+
Page 14
HOME THEATER
TV/VCR
+
HOME
THEATER
+
• Video (included)
Page 15
• Audio (included)
SATELLITE
• Video
TV
(special,
+
HOME THEATER
not included)
Page 16,17
+
TV GAME
or
• Audio
(special,
not included)
VIDEO CAMERA
TAPE RECORDER/PLAYER
AM/FM TUNER
PC
or
other AUX
DEVICE
+
Page
• Audio (included)
18,19,20
HOME THEATER
Cables Needed to Connect Components to Your Home Theater System
The pictures below show the cables needed for the connections represented in this booklet.
NOTE: Audio cables are usually sold as a bundled set, but theconnection sketches in this booklet show each cableseparately for better
visibility. You will need additional cables to connect everything shown above. Check your other equipments’ booklets to see
what cables are needed.
1 Set of Audio cables with
Speaker Wires (5 sets
are attached to the back
of the speakers)
Red & White Audio cables
(one set included, most installations
will need these)
Yellow Video cable
(one set included)
green 3.5mm plug for Computer
Connection (or other Source
with 3.5mm Jack)
IB-HT391-WM-E-073003
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SYSTEM CONNECTIONS
Speaker System Connections
Connect the supplied speakersystem by matching the colors The speaker wires and connectors are color-coded for easier
of the terminals to those ofthe cords.
set up.
• Connect the Front Left speaker to the Front Left terminals.
• Connect the Front Right speaker to the Front Right terminals.
• Connect the Center speaker to the Center speaker terminals.
• Connect the Rear Left speaker to the Rear Left terminals.
• Connect the Rear Right speaker to the Rear Right terminals.
IMPORTANT:
Before making connections, make sure the power is off.
QUICK SETUP DIAGRAM
NOTE: If you would also like to improve your TV’s sound output with this Home Theater system, your TV set needs to have AUDIO
output jacks. If you have a cable box or satellite receiver, you can connect the receiver’s AUDIO output directly to the AUX
input or any available set of input jacks on the back of this Home Theater system.
IB-HT391-WM-E-073003
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SYSTEM CONNECTIONS
Tips for connecting the speaker wires To avoid short-circuiting the speakers
Unwind and stretch out the speaker wires attached with each
Make sure the stripped end of each speaker wire does not
•
speakers, then push and hold down the speaker terminal tab on
touch another speaker terminal or the stripped end of
the back of the main set to insert each wire. Make sure the wire is
another speaker wire.
fully inserted, but the insulation is not covering the inserted part of
the speaker wires.
SPEAKER TERMINALS
Examples of poor connection of the
speaker wires
PUSH AND HOLD THE COLORED TAB OF TERMINAL.
Stripped speaker wire is touching anotherspeaker terminal.
Make sure not even 1 strand of wire touches the other
wire!
•
WHILE HOLDING THE TAB OF THE TERMINAL, STICK
THE EXPOSED PART OF THE WIRE INTO THE HOLE
OF THE TERMINAL.
Stripped wires are touching each other due to excessive
removal of insulation. Do not allow the above to happen on
your set.
•
NOTE: If longer wires are needed, you may buy any good quality
speaker wire and splice the wires yourself. Please make sure
the wires are not shorting to each other and observe the correct
color polarity. Many speaker wires have a dotted line or solid line
REMOVE YOUR FINGER FROM THE TERMINAL TO
LOCK THE WIRE INSIDE THE TERMINAL.
or raised rib on one side to identify each side.
Also make sure you use electrical tape to cover your splices.
GO ON TO THE NEXT WIRE & REPEAT ABOVE.
MAKE SUREPOWER IS OFF WHEN DOING THE ABOVE.
NOTE:
Be sure to match the speaker wire to the appropriate terminal on
the back ofthe main set: (+) to (+) (color), and (-) to (-) (black). If the
wires are reversed, the sound will be distorted and will lack some
tones. Follow the color codes of each terminals.
IB-HT391-WM-E-073003
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER POSITIONING INFORMATION
Your system is supplied with 5 compact sized satellite speakers and
one large subwoofer (main set). The satellite speakers and the center
speaker reproduce only the mid range and higher frequencies. All of
the low frequency(bass) sounds are produced by the subwoofer. Proper
positioning andplacementof the speakers is important in orderto provide
the best surround sound experience. We understand that due to the
size and shape of your listening room, and the location of your furniture,
you may not be able to set up the speakers exactly as per these
diagrams. However these simple guidelines will help you maximize
your home theater experience.
• Note the speaker levels are presetat the factory and most people will
not need to fine tune the sound of each speaker. Wesuggest you skip
this part at first. Later on you can adjust the sound level of each
individual speaker. See Page 22.
Your Usual Seat
• Although all5 satellites are ofthe same size, the speakers inside the
cabinets are different. The speaker wires on the back ofthe cabinets
are color-coded, as are the speaker terminals on the back ofthe main
unit. Refer to the connection diagram on page 8. Be sure you are
using the correctsatellite speaker in each location,front, rear and
center. Please follow the colors for best results.
POSITION ALL 5SPEAKERS APPROXIMATELY AT THE
SAME DISTANCE FROMYOUR LISTENING POSITION.
• For bestsurround sound effects, all4 of the satellite speakers and the
POSITION THESUBWOOFER AS BELOW.
center speaker should be roughly at the same distance from your
usual listening position.
POSITION THE SPEAKERS LIKE THIS FOR OPTIMAL LISTENING EXPERIENCE
• The 4 satellite speakers and the centerspeaker should be placedapproximately the same distance from your listening
position.
• The center speaker should be placed directly above (or below) the TV set. Left and right front speakers should be
approximately at the same height as the center speaker.
• The rear speakers should be either in line with, or behind your listening position, approximately at ear level, or slightly
above.
• The subwoofer (main set) should be on the floor near the TV, or in any corner, but remember you need a clear path to
your remote (don’t block this set with a curtain).
• All speakers must be visible. Do not hide them behind curtains, furniture, etc, as this will affect the sound.
IB-HT391-WM-E-073003
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER POSITIONING INFORMATION
· The left front, right front, and center speakers should be
SATELLITE SPEAKERS
placed at roughly the same height. The center speaker
reproduces most of the dialog spoken by the actors on the
TV screen, thereforeit should be placedeither directly above
or below the center of the TV set. Once you position the
center speaker, try to position the left front and right front
speakers at the same height. It is notrecommended to place
any ofthesatellite speakers on the floor. Many people prefer
to place the center speakerhorizontally above the TV set.
· The left rear and right rear speakers can be placed in line
with yourlistening position or behind your listening position.
Ideally they should be placed slightly above your ear level
when you are seated in your normal listening position.
· We have provided one keyhole opening on the backs of all
the satellite speakers that allow the satellite speakers to be
wall mounted in a vertical position.
· The subwoofer will provide the most dramatic bass effects
(low frequency sounds like explosions and thunder) when it
is placed on the floor. Do not place the subwoofer on a
stand or table. The subwoofer should be placed in the front
oftheroom so that itis facing towards yourlistening position.
It can be placed on either side of the TV or even in the
corner of the room, as far away as the cable will allow. The
bass sounds from the subwoofer are non-directional. You
will not really be able to tell where the bass is coming from.
SUBWOOFER
· LONG ROOMS - In case your room is unusually long and
longer wire are needed, you may buy any good quality
speaker wire and splice the wires yourself for adding wire
length to your speakers. Be careful not to allow the plus +
and minus - wiresto touch each other. Many speaker wires
have a dotted line or solid line or raised rib on one side to
identify each side.
Remember to cover the splices with electrical tape.
IB-HT391-WM-E-073003
11
Download from Www.Somanuals.com. All Manuals Search And Download.
(If you don’t have a DVD player yet)
TV CONNECTIONS
Home Theater System + TV (if your TV has Audio Output jacks)
NOTE: On some TVs, these jacks are in the front,
or yourTV may not have these jacks.
NOTE: If your TV does not have audio output jacks,
your TV’s sound cannot be heard through
the surround sound system. But, you can
still use it for your DVD player etc.
If you have a cable box or satellite receiver, you
can connect the receiver AUDIO OUTPUT directly
to your AUX INPUT or any available set of input
jacks on the back of the HOME THEATER
SYSTEM.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET)
1. Connect the 5 satellite speakers as shown on Page 8 (or the QUICK SETUP DIAGRAM packed with the set).
2. Insert the stereo audio cables (included) into the AUX AUDIO INPUT L (left=white) and R (right=red) jacks orany
available set ofinput jacks on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT
jacks on your TV, this will allow your TV’s sound to play through your HOME THEATER SYSTEM.
NOTE: On some TVs, you may have to activate the audio out jacks of your TV. See your TV’s booklet.
3. Insert the AC power cord into an AC outlet.
4. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY button
on the front of the main set or on the REMOTE to turn the set on (or off).
5. Press the INPUT SOURCE button several times till the AUX indicator lights.
NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to
ON, the DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus
the subwoofer. To change 5.1 channelto 2 channel output, press the SPEAKER CHANNELS button. The sound
will come out of only 2 front speakers plus the subwoofer.
6. Go to Page 21 for other detailed instructions.
NOTE: Your cable or antenna connection to yourTV are not touched with this connection. Leave your antenna cable
to your TV as you normally would. No changes will be made to your current antenna connections.
IB-HT391-WM-E-073003
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + DVD CONNECTIONS
Home Theater System + TV + DVD Player
Or connect it into the VIDEO IN
jack of the main set first, then
use another Video cable to
connect the VIDEO OUT jack
to the VIDEO IN jack of your
TV.
NOTE: Some newer TV sets have several VIDEO
INPUT jacks. You may use one of these for your
DVD player and the others for connecting to the
VIDEO OUT jacks of the component. If your set is
older and only has a single VIDEO INPUT jack,
you may buy a switch box to change the video from
DVD to Game.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET)
1. Insert the audio cables (included) into the DVD INPUT jacks L (Left = White) and R (Right = Red) on the back of
your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your DVD player, this will allow
your DVD’s sound to play through your HOME THEATER SYSTEM.
2. Insert the video cable directly into the VIDEO OUT jack on the back of your DVD player and into the VIDEO IN jack
on the back of your TV set. This is especially convenient if your TV has several inputs.
NOTE: You may insert the video cable directly into the VIDEO OUT jack on the back of your DVD and into the
VIDEO IN jack on the back ofyour HOME THEATER SYSTEM. Then insert the video cable into the VIDEO
IN jack on your TV, and into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM.
3. Insert the AC power cord into an AC outlet.
4. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY button
on the front of the main set or on the REMOTE to turn the set on (or off).
NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to ON, the
DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus the
subwoofer. To change 5.1 channel to 2 channeloutput, press the SPEAKER CHANNELS button. The sound
will come out of only 2 front speakers plus the subwoofer.
5. Make sure your DVD player is on and follow your DVD player’s instructions.
NOTE: For some DVDs, if the sound output is not setto analog, the audio cables may not be active and there willbe no
sound output. If this happens, check and make sure your DVD’s sound output is set to analog.
6. Go to Page 21 for other detailed instructions.
NOTE: Your cable orantenna connection to yourTV are not affected with this connection. Leave your antenna cable
connected to yourTV as you normally would. No changes willbe made to your current antenna connections.
IB-HT391-WM-E-073003
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + VCR CONNECTIONS
Home Theater System + TV + VCR
CABLE OR
ON AIR ANTENNA/
SATELLITE SIGNAL
This does not change
from your current connection.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET)
1. Insert the stereo audio cables (included) into the AUX INPUT L (left=white) and R (right=red) jacks or any available
set of input jacks on the back of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on
your VCR, this will allow your VCR’s sound to play through your HOME THEATER SYSTEM.
2. Connections of your cables are not changed when you add your HOME THEATER SYSTEM.
NOTE: You will hear sound from both the TV and your HOME THEATER SYSTEM, this is normal.
3. Insert the AC power cord into an AC outlet.
4. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY button
on the front of the main set or on the REMOTE to turn the set on (or off).
NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to ON, the
DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus the subwoofer.
To change 5.1 channel to 2 channel output, press the SPEAKER CHANNELS button. The sound will come out of
only 2 front speakers plus the subwoofer.
5. Press the INPUT SOURCE button several times till the AUX indicator lights.
6. Make sure your VCR is on and follow your VCR’s instructions.
7. Go to Page 21 for other detailed instructions.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + VCR + SATELLITE RECEIVER CONNECTIONS
Home Theater System + TV + VCR + Satellite
SATELLITE RECEIVER/CABLE BOX
CABLE OR
ON AIR ANTENNA/
SATELLITE SIGNAL
RF (coaxial) cable
unchanged, same as
before.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).
1. Follow the same on P14 to connect your VCR with your HOME THEATER SYSTEM.
2. To hear the sound of the satellite programs through your HOME THEATER SYSTEM, just insert a set of audio cables
(optional, not included) into one pair of the 3 audio input jacks of your HOME THEATER SYSTEM, and into the
corresponding AUDIO OUT jacks of your SATELLITE RECEIVER/CABLE BOX.
3. Your RF (coaxial) cable connection from your SATELLITE RECEIVER/CABLE BOX to your VCR is unchanged, the
same as before.
NOTE: You will hear sound from both the TV and your HOME THEATER SYSTEM, this is normal.
4. Insert the AC power cord into an AC outlet.
5. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY button on
the front of the main set or on the REMOTE to turn the set on (or off).
NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to
ON, the DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus
the subwoofer. To change 5.1 channel to 2 channel output, press the SPEAKER CHANNELS button. The sound
will come out of only 2 front speakers plus the subwoofer.
6. Press the INPUT SOURCE button several times till the AUX indicator lights.
7. Make sure your VCR is on and follow your VCR’s instructions.
8. Go to Page 21 for other detailed instructions.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + TV GAME CONNECTIONS
Home Theater System + TV + TV Game
AUDIO /VIDEO CABLE
(not included)
NOTE:YourTV GAME may
have a special cable for
connections. This diagram
is only for illustration.
NOTE: If your TV set has several VIDEO INPUT
jacks, you may connect your GAME’s VIDEO cable
to one of your TV’s VIDEO INPUT jacks directly.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).
1. Insert the stereo audio cables into the GAME INPUT AUDIO L (left=white) and AUDIO R (right=red) jacks or any
available set ofinput jacks on the BACK of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT
jacks on your TV GAME, this will allow your TV GAME’s sound to play through your HOME THEATER SYSTEM.
2. Insert the yellow video cable (included with your TV GAME) into the GAME INPUT VIDEO jack on the BACK of your
HOME THEATER SYSTEM, and into the VIDEO OUT jack on your TV GAME.
3. Insert another video cable into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the VIDEO IN
jack on your TV.
4. Insert the AC power cord into an AC outlet.
5. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY button on
the front of the main set or on the REMOTE to turn the set on (or off).
NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to ON, the
DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus the subwoofer.
To change5.1 channel to 2 channel output, press theSPEAKER CHANNELS button. The sound will come outof only
2 front speakers plus the subwoofer.
6. Press the INPUT SOURCE button several times till the GAME indicator lights.
7. Make sure your TV GAME is on and follow your TV GAME’s instructions.
8. Go to Page 21 for other detailed instructions.
IB-HT391-WM-E-073003
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TV + VIDEO CAMERA CONNECTIONS
Home Theater System + TV + Video Camera
NOTE: Your VIDEO CAMERA
may have a special cable (with
a triple 3.5mm plug on one side)
for connections. This diagram is
only for illustrations.
AUDIO /VIDEO CABLE
(not included)
NOTE: If your TV set has several VIDEO
INPUT jacks, you may connect your VIDEO
CAMERA cable to one of your TV’s VIDEO
INPUT jacks directly.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).
1. Insert the stereo audio cables into the GAME INPUT AUDIO L (left=white) and AUDIO R (right=red) jacks or any
available set ofinput jacks on the BACK of your HOME THEATER SYSTEM, and into the corresponding AUDIO OUT
jacks on your VIDEO CAMERA, this will allow your CAMERA VIDEO’s sound to play through your HOME THEATER
SYSTEM. (NOTE: Many video cameras have special plugs on one side to connect to your camera.)
2. Insert the video cable (included with your VIDEO CAMERA) into the GAME INPUT VIDEO IN jack on the BACK of your
HOME THEATER SYSTEM, and into the VIDEO OUT jack on your VIDEO CAMERA. (NOTE: Your video camera may
have a 3.5mm triple jack, consult your camera’s booklet for details.)
3. Insert the video cable (included) into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the
VIDEO IN jack on your TV.
4. Insert the AC power cord into an AC outlet.
5. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY button on
the front of the main set or on the REMOTE to turn the set on (or off).
6. Press the INPUT SOURCE button several times till the GAME indicator lights. (This setting is either for a Video
Camera or a TV Game.)
NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to ON, the
DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus the subwoofer.
To change 5.1 channel to 2 channel output, press the SPEAKER CHANNELS button. The sound will come out of
only 2 frontspeakers plus the subwoofer.
7. Make sure your VIDEO CAMERA is on and follow your VIDEO CAMERA’s instructions.
8. Go to Page 21 for other detailed instructions.
17
IB-HT391-WM-E-073003
Download from Www.Somanuals.com. All Manuals Search And Download.
AUX IN CONNECTIONS
3.5MM PLUG
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).
Illustration is showing some possible connections. You can only connect ONE ofthese components
to the AUX INPUT jacks of yourHOME THEATER SYSTEM (AUX stands for Auxiliary).
•
•
You can hear the sound of any one of these devices through your HOME THEATER SYSTEM if you
connect the proper cables.
1. Insert the audio cables into the AUDIO OUTPUT L (left=white) and R (right=red)jacks of your TAPE RECORDER
PLAYER, and into the corresponding AUX INPUT jacks or any available set of input jacks on your HOME
THEATER. This will enable you to hear your components system through your HOME THEATER SYSTEM.
2. You may also use the green 3.5mm plug and cable (included) to connect your CD PLAYER, RADIO or other
device to your HOME THEATER SYSTEM
3. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY
button on the front of the main set or on the REMOTE to turn the set on (or off).
4. Press the INPUT SOURCE button several times till the AUX indicator lights.
NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to
ON, the DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus
the subwoofer. To change 5.1 channel to 2 channel output, press the SPEAKER CHANNELS button. The
sound will come out of only 2 front speakers plus the subwoofer.
5. Make sure your AUX IN component is on and follow your component’s instructions.
6. Go to Page 21 for other detailed instructions.
IB-HT391-WM-E-073003
18
Download from Www.Somanuals.com. All Manuals Search And Download.
AM / FM TUNER CONNECTIONS
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).
1. Insert the audio cables into the AUDIO OUTPUT L (left=white) and R (right=red) jacks on the back of your
AM/FM TUNER, and into the corresponding AUX INPUT jacks or any available setof input jacks on the back of
your HOME THEATER. This will enable you to hear your stereo AM/FM TUNER through your HOME THEATER
SYSTEM.
2. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY
button on the front of the main set or on the REMOTE to turn the set on (or off).
3. Press the INPUT SOURCE button several times till the AUX indicator lights.
NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to
ON, the DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus
the subwoofer. To change 5.1 channel to 2 channel output, press the SPEAKER CHANNELS button. The
sound will come out of only 2 front speakers plus the subwoofer.
4. Make sure your AM/FM TUNER is on and follow your AM/FM TUNER’s instructions.
5. Go to Page 21 for other detailed instructions.
IB-HT391-WM-E-073003
19
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPUTER SOUND CONNECTIONS
3.5MM PLUG
ONE SET OF AUDIO CABLES
WITH 3.5MM PLUG IS INCLUDED
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).
1. Insert the green 3.5mm audio plug of the AUDIO cable (included) into the PC AUDIO OUT jack of your PC, and
insert the AUX INPUT L (left = white) and R (right = red) plugs into the corresponding AUX INPUT jacks on the
back of your HOME THEATER. This will enable you to hear your PC’s music through your HOME THEATER
SYSTEM.
2. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY
button on the front of the main set or on the REMOTE to turn the set on (or off).
3. Press the INPUT SOURCE button several times till the AUX indicator lights.
NOTE: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to
ON, the DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus
the subwoofer. To change 5.1 channel to 2 channel output, press the SPEAKER CHANNELS button. The
sound will come out of only 2 front speakers plus the subwoofer.
4. Make sure your computer is on and follow your computer’s instructions.
5. Go to Page 21 for other detailed instructions.
IB-HT391-WM-E-073003
20
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFIER IN MAIN UNIT
REMOTE CONTROL
MAIN SET
ON/STANDBY
button
STANDBY
indicator
INPUT SOURCE
SPEAKER
CHANNELS
MASTER VOLUME
buttons
General
1 Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY button
on the front of the main set or on the REMOTE to turn the set on (or off).
NOTE: The STANDBY indicator has 2 modes: flashing and steadily ON (slow flashing indicates the set is in standby, steadily on
indicates the setis on). When the set is off (standby), pressing the ON/STANDBY button on the main unit oron the REMOTE
CONTROL will turn the set on. The indicator will become steadily on.
2 Press the INPUT SOURCE button on the front panel of the main unit repeatedly to select one of the input sources, or press the
SOURCE button on the REMOTE to select the audio input source directly, the corresponding indicator will light.
3 For SUBWOOFER’s volumeadjustments, press the SUBWOOFER volume control buttons on the Remote control:
+ raises the volume, and the top volume indicator will flash.
lowers the volume, and the lower volume indicator will flash.
Follow this step to adjust theCENTER and REAR speakers as well. Or you may press the VOLUME UP or DOWN button on the main
set or the MASTER VOLUME control on the remote to raise or lower all speakers’ volumes at the same time.
4 To select the listening mode, press the SPEAKER CHANNELS button on the main set or on the REMOTE CONTROL.
NOTE: The factory’s defaultinput source is DVD with 5.1 channel sound output. When the set is turned to ON, the DVD indicator and
5.1 channel indicator will be on and sound will come out of 5.1 speakers plus the subwoofer. To change 5.1 channel to 2
channeloutput, press the SPEAKER CHANNELS button. The sound willcome out ofonly2 front speakers plus the subwoofer.
5 To momentarily shut off the sound, press the MUTE button. Both the top and lower VOLUME indicators will flash. Press the
MUTE button again or press the MASTER VOLUME button to restore the sound.
NOTE: Flip the POWER switch button on the back of the main unit to “OFF” if the set will not be used for a long period of time
(several days or more).
IB-HT391-WM-E-073003
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFIER
Volume Adjustment
1 To adjustthe master volume
RESET BUTTON
(Change all the speakers’ volume settings at the same time), press the MASTER
VOLUME buttons on the main unit or on the REMOTE to decrease or increase the
master volume level.
Pressing this button on the remote
control will reset all 5 satellite speakers
and the subwoofer to their default factory
settings, normal level.
raises the volume
lowers the volume
The MAX VOLUME indicator on the front panel will be on when the MASTER VOLUME is
at its maximum level, also it will flash confirming you pressed the VOLUME UP
button.
Steadily on.
Flashing when you
Maximum volume level
press the
button
The MIN VOLUME indicator on the front panel will be on when the MASTER
VOLUME is at its minimum level, also it will flash confirming you pressed the VOLUME
DOWN
button.
Flashing when you
press the button
Minimum volume level
Steadily on.
2 To adjust the individual speaker’s volume:
For SUBWOOFER’s volume adjustments, press the SUBWOOFER’s volume control
buttons:
+
raises the volume, and the MAX VOLUME indicator will flash.
lowers the volume, and the MIN VOLUME indicator will flash.
Follow this step to adjust the CENTER and REAR speakers as well. Or you may press the
VOLUME UP or DOWN buttons on the main set or the MASTER VOLUME control on the
remote to raise or lower all the speakers’ volumes at the same time.
NOTE: Every time you turn the set on,
the MASTER VOLUME will go
back to the factory’s default
setting; and whenever you press
the INPUT SOURCE button on
the main unit or the SOURCE
button on the REMOTE, the
MASTER VOLUME will go back
to the factory’s default setting.
This avoids sudden very loud
sounds from startling you.
The MAX VOLUME indicator flashes
when pressing the
button.
The MIN VOLUME indicator flashes
when pressing the button.
NOTE: REAR speakers and CENTER
speaker volume adjustments can
only be made from the remote
control in 5.1 channel speaker
mode, not in 2 channel speaker
mode.
NOTE: The excessively loud volume settings may cause sound distortion.
To reduce the sound distortion, adjustthe set’s MASTER volumeorthe
SUBWOOFER’s volume settings on the front of the HOME THEATER or
on the remote, also adjust the volumeof the input source (DVD or other).
IB-HT391-WM-E-073003
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING MODE
5.1 Channel and Stereo Modes
Most currently released DVDs, video cassettes and audio compact discs and many
TV broadcasts are encoded with 2 channelStereo or 5.1 channel. Audio discs and
tuner broadcasts are in Stereo.
1 Press the INPUT SOURCE button on the front panelof the
main unit repeatedly to select one of the audio input
sources, or press the SOURCE button on the REMOTE to
select directly your required audio input source. The
corresponding indicator will light.
NOTE: The factory’s default input source is DVD with 5.1
channel sound output. When the set is turned to
ON, the DVD indicator and 5.1 channel indicator
will be on and sound will come out of 5 speakers
plus the subwoofer. To change 5.1 channel to 2
channel output, pressthe SPEAKER CHANNELS
button. The sound will only come out of 2 front
speakers plusthe subwoofer.
2 Press the SPEAKER CHANNELS button on the REMOTE control to select 5.1
channel or 2 channel sound.
3 When 2 channel sound is selected, the center & rear speaker volume
controls will, of course, not work.
NOTE: Aboutfuse replacement.
In the unusualevent that nothing lights up and no sound, your fuse may have blown. To check fora blown fuse, follow the steps below.
GOOD FUSE
BLOWN FUSE
1.Open the fuse cover(on the back of
the main set) by using a Philips
screwdriverto unscrewthe fuse cover
cap.
2. Examine the fuse. If a wire
3. If the wire is broken in the middle,
replace with a 1.6A 250V “T” type
glass fuse.
shows, the fuse is good.
“T” means time delay or slow blow
fuse.
IB-HT391-WM-E-073003
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Remedy
Symptom
1. Is the power cord firmly plugged into the power outlet? Insert the AC power
plug securely into the power outlet. Make sure your outlet has power, you
can check this by plugging a lamp into the outlet to see if it works.
2. Is the main power switched to off? Flip it to ON.
3. One of the safety mechanisms may be operating. In this event, unplug the
player from the power outlet briefly and then plug it in again to reset the set.
No power
Your set’s fuse may have blown.
No power
Unscrew the fuse cover & check the fuse.
Replace only with same 1.6A slow blow 250V “T” type glass fuse. See page 23
for more information.
Make sure your DVD’s video cable is plugged into your TV set. This Home
Theater only improves the sound of your DVD player, it does not affect the
video at all. Also select the correct VIDEO INPUT on your TV.
Your DVD player has no picture
1. Check that the speakers and components are connected securely and
correctly, make sure the stripped end of each speaker wires does not touch
each other to avoid short-circuit of the speaker wires (see Page 8, 9). Also
check speaker volume (see Page 22).
2. Make sure your source (DVD or other) is plugged in and operating. Also
check that component’s booklet, maybe you need adjust that component.
3. Check and makesure your DVD’s sound output is set to analog. For some DVDs,
if the sound output is not set to analog, the audio cables may not be active and
there will be no sound output.
No sound or only a very low-level
•
sound is heard.
Distorted sound.
•
4. Make sure thatyou have selected the correct source on the system(DVD orother).
5. Adjust theset’s MASTER volume orthe SUBWOOFER’s volume settingson the front
of theHOME THEATER or onthe remote, also adjustthe volume ofthe inputsource.
6. Ensure the MUTE button is not pressed on the HOME THEATER remote (If
yes, press the MUTE button again).
7. The audioorspeakerconnecting wiresare damaged. Replace them with new ones.
1. Check if the batteries are installed with the correct polarities (
and
).
+
2. If the batteries are weak or dead, replace them with new ones (size “AAA”).
3. Point the remote control unit at a distance of less than 20 feet from the main
unit of the HOME THEATER system.
The REMOTE CONTROL unit does not
work.
4. Remove any obstacles between the remote control unit and remote control
sensor.
5. If the battery terminals are dirty or corroded, clean them with sandpaper.
Press the POWER button on the back ofthe MAIN UNIT to turn the set ON.Then
press the ON/STANDBY button on the front of the main unit or on the REMOTE.
The HOME THEATER may not be operating properly due to lightning, static
electricity, or some other external factors. Reset the player by disconnecting the
power plug and then re-connecting itbefore calling customer service. Also check
the Fuse. See page 23.
No buttons operate (on the main unit
and / or the REMOTE CONTROL unit).
The leftand right sounds are unbalanced
or reversed.
Check that the speakers and components are connected correctly and securely.
During 2 channel operation, these speakers cannot be adjusted individually,
you can raise or lower the volume lever of the whole set by pressing the
MASTER VOLUME UP or DOWN button. To adjust these speakers individually,
set to 5.1 channel sound output mode.
Rear speakers and center speaker can-
not be adjusted individually.
1. Check that the speakers and components are connected securely.
2. Insert all wires firmly, follow the setup pages starting on Page 7.
Loud hum usually means a plug is not fully seated into the jack.
Loud hum or noise is heard.
1. Make sure the Center speaker’s volume is set to a normal level (see Page 22).
2. Adjust the center speaker volume by pressing the volume control buttons of
the center speaker on the REMOTE (see Page 22).
No sound is heard from the center
speaker.
3. If you are listening to 2 channel output mode, only 2 front speakers plus the
subwoofer will have sound.
Double check if input & output jacks were inserted properly. Also ask a friend to
The system does not operate properly.
help you before calling customer service.
IB-HT391-WM-E-073003
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
Power requirements ----- AC 120V, 60Hz
Power consumption ------100W
Main Unit Dimensions --- 61/ X 137/8 X 101/4 inches / 16.6 X 35.4 X 26.1 cm
Weight ---------------------- 14.82 lbs / 6.7 kg
Audio Power Outputs
Total output power: 140 Watts at Maximum
Distortion
0.06% @ reference output
Remote Operating Range
Within 20 feet between the main unit and the remote.
Replacement Fuse
Time delay 1.6 Amp T type (slow blow) glass fuse 250V.
Speakers
Front Left ------------------- Dimensions: 37/8 x 35/8 x 41/4 inches / 98 X 97 X 107 mm
Weight: 1 lb / 0.46 kg
Center -----------------------Dimensions: 37/8 x 35/8 x 41/4 inches / 98 X 97 X 107 mm
Weight: 1 lb / 0.46 kg
Front Right ----------------- Dimensions: 37/8 x 35/8 x 41/4 inches / 98 X 97 X 107 mm
Weight: 1 lb / 0.46 kg
Rear Left ------------------- Dimensions: 37/8 x 35/8 x 41/4 inches / 98 X 97 X 107 mm
Weight: 0.9 lb / 0.43 kg
Rear Right ----------------- Dimensions: 37/8 x 35/8 x 41/4 inches / 98 X 97 X 107 mm
Weight: 0.9 lb / 0.43 kg
LENOXX reserves the right to make design and specification changes for product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET OR SPEAKERS WHEN
PLACING IT ON A SURFACE WITH A NATURAL OR LACQUER FINISH.
For customer service of this REGENT product
or Dial 1-800-315-5885 (MONDAY-THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
or Write to:
LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
© 2003 LENOXX ELECTRONICS CORP.
MADE & PRINTED IN CHINA
IB-HT391-WM-E-073003
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|