®
JUMBO DISPLAY
AM / FM CLOCK RADIO
MODEL CR-776
OPERATING INSTRUCTIONS
EASY TO READ JUMBO CLOCK DISPLAY
WAKE UP TO RADIO OR ALARM
AM/FM RADIO RECEIVER
ELECTRONIC DIGITAL CLOCK
PM & AUTO INDICATORS
SNOOZE FUNCTION (FOR EXTRA 9 MINUTES SLEEP)
SLEEP TO RADIO (WITH AUTOMATIC SHUTOFF)
BATTERY BACK-UP (9V BATTERY, NOT INCLUDED)
•
•
•
•
•
•
•
•
PLEASE READ CAREFULLY BEFORE USE
CR-776_031500 NL v.2
E
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
11. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at
plugs, convenient receptacles, and the point where they exit from
the appliance.
12. Cleaning - The appliance should be cleaned only as recommended
by the manufacturer.
13. Nonuse periods - The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
14. Object and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through
openings.
15. Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid been spilled into the appliance; or
C.The appliance has been exposed to rain; or
D.The appliance does not appear to operate normally or exhibits
a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
16. Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.
17. Power lines - An outdoor antenna should be located away from
power lines.
18. Outdoor Antenna Grounding - If an outside antenna is connected
to the receiver, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built up static
charges. Section 810 of the National Electrical Code, ANSI/NFPA
70 provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of groundingconductors, location of
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN WIRE
GROUND
ANTENNA DISCHARGE
CLAMP
UNIT (NEC SECTION
810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
2
CR-776_031500 NL v.2
E
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
FRONT VIEW
PM INDICATOR CLOCK DISPLAY
DIAL SCALE
TUNING
CONTROL
VOLUME
CONTROL
AUTO (ALARM) INDICATOR
TOP VIEW
FUNCTION SWITCH
(ALARM/AUTO/OFF/ON)
TIME SET
BUTTON
DIMMER
SWITCH
BAND
SWITCH
SLEEP
BUTTON
HOUR SET
BUTTON
MINUTE SET
BUTTON
ALARM SET/
OFF BUTTON
SNOOZE
BUTTON
BACK VIEW
BATTERY
COMPARTMENT
(9V, for back up)
FM ANTENNA WIRE
AC POWER CORD
3
CR-776_031500 NL v.2
E
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Powering Up
Plug the AC power cord into a 120V, 60Hz electrical outlet. The clock
display will light up and flash indicating the power is on.
NOTE: This cord is polarized. This means the cord will only fit one
way into the socket or wall outlet. If it does not fit, do not force
it, just reverse it and try again.
BATTERY BACK-UP
If the AC cord is disconnected or if there is a short time power failure,
this electronic clock and timer are designed to continue operating
internally (without showing in the display) if a 9 volt battery (not included)
is installed.
The radio will work fine without this back up battery.
NOTE: You may check the condition of the battery every few months
by disconnecting the AC cord and connecting it again 2 or 3
minutes later. The preset times will show. If the time flashes, it
indicates the battery is dead or not connected properly.
Setting the Clock
1. Press the TIME set button together with the HOUR set button until the
display shows the desired hour.
2. Press the TIME set button together with the MINUTE set button until
the display shows the desired minutes.
NOTE: When the PM indicator is off, the time is AM.
Setting the Alarm Time
1. Use the ALARM/OFF button to check the alarm time.
2. Press the ALARM/OFF button together with the HOUR set button
until the display shows the desired alarm hour time.
3. Press the ALARM/OFF button together with the MINUTE set button
until the display shows the correct alarm minutes.
4. Make sure the PM lamp is off if you want the clock to wake you in the
morning.
5. Release the ALARM/OFF button, the clock display will show the
normal time of day.
NOTE: Again check the PM indicator. If you want the radio to wake
you in the morning, the lamp next to PM should be off on alarm
time (when pressing ALARM/OFF button). To change PM to
AM time, advance time 12 hours. To have clock wake you up,
slide the FUNCTION switch to AUTO or ALARM position(s).
Playing the Radio
1. Slide the FUNCTION switch to ON position.
2. Slide the BAND switch to either AM or FM.
3. Turn the TUNING control to your desired station.
4. Adjust the VOLUME control to your favorite listening level.
5. Slide the FUNCTION switch to OFF position to shut off the radio.
GETTING BETTER RADIO RECEPTION:
For best AM reception, rotate the radio a small amount or position it
near the window.
For best FM reception, unwrap and fully extend the FM antenna wire.
WARNING: Do not connect the FM antenna to an outdoor antenna.
4
CR-776_031500 NL v.2
E
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
Waking up to Radio
1. Set the alarm time as previously instructed.
2. Select your desired AM or FM broadcast by following the procedure
of Playing the Radio.
3. Make sure the VOLUME control is set loud enough to wake you up.
4. Slide the FUNCTION switch to AUTO position and the AUTO lamp
will light up.
NOTE: Your set is now ready to turn on automatically at your
selected alarm time.
5. When alarm sounds, to get 9 minutes of extra sleep, press the
SNOOZE button.
6. To shut off the alarm, press ALARM/OFF button.
Wake to Buzzer
1. Set the alarm time as previously instructed.
2. Slide the FUNCTION switch to ALARM position. The AUTO
indicator will light.
3. The buzzer alarm is now set to turn on automatically at the
selected alarm time.
4. When buzzer sounds, to get 9 minutes of extra sleep, press the
SNOOZE button.
5. To shut off the alarm, press ALARM/OFF button.
Snooze Control
When this set has waken you up and you wish to sleep a few minutes
more, simply press the SNOOZE button. The radio or alarm will go off
for 9 minutes and then come on again. This is repeated in a row.
Alarm Off
1. Press ALARM/OFF button. This will shut the alarm for that day only.
Next day the set will wake you again at the same time.
2. Slide the FUNCTION switch to OFF position and the alarm function
is off until you re-adjust the FUNCTION switch to AUTO or ALARM.
Sleep Control
The SLEEP control will allow the radio to play 58 minutes (or 1 hour and
59 minutes) before the radio turns itself off.
1. Press the SLEEP button, the display will show 58 minutes and the
radio will start to play.
2. Holding the SLEEP button down, the display will count down.
Release the SLEEP button when the display shows your desired
amount of time you want the radio to play before shutting itself off.
3. Pressing the SLEEP button, the HOUR set button, and the MINUTE
set button all simultaneously down, the required sleep time will be
changed to 1 hour and 59 minutes. You may reduce the sleep time
by following the above Step 2.
4. To turn the radio off before the playing time has expired,
simply press the SNOOZE button.
NOTE: The sleep function will not affect the wake-up operation of the
clock if the FUNCTION switch is in AUTO or ALARM position.
In the morning, the radio or buzzer will wake you up if FUNCTION
switch is in the AUTO or ALARM position.
5
CR-776_031500 NL v.2
E
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
(Helpful Hints)
SHOULD YOUR SET EXHIBIT A PROBLEM, CHECK THE
FOLLOWING BEFORE SEEKING SERVICE.
SYMPTOM
CAUSE
SOLUTION
AM or PM not set
correctly. Is alarm
time set in AM range
(PM Lamp off)?
Advance the clock 12
hours.
Alarm does not
come on in the
morning.
FUNCTION switch
is in OFF position. Is
the AUTO Lamp off?
Set the FUNCTION
switch to AUTO or
ALARM position.
FM antenna wire is
not extended.
Extend FM antenna
wire.
Station not tuned in
properly.
Tune to desired station
carefully.
FM is distorted
and weak.
Weak broadcast
station.
Turn to a stronger
Station.
Rotate the set to
receive better signal.
Signal is blocked.
Noise or weak
sound on AM
broadcasts.
Turn the radio for better
AM reception or bring
set near a window.
External
interference.
FUNCTION switch is Slide the FUNCTION
switch to ON position.
in the OFF position.
No sound.
VOLUME control set Rotate VOLUME control
to minimum position. for desired sound.
Set the clock and alarm
The clock is not set.
time.
The clock is
flashing.
A power failure has
occurred.
Reset the clock alarm
time and time of the day.
Connect set’s AC cord
and make sure outlet
has power.
The set’s AC cord is
not connected.
Clock is dead.
LENOXX reserves the right to make design and specification
changes for product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND ACLOTH OR OTHER PROTECTIVE MATERIAL
BE PLACED UNDER THE SET WHEN PLACING IT ON SURFACE
WITH A NATURAL OR LACQUER FINISH.
6
CR-776_031500 NL v.2
E
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Power source:
AC 120V, 60Hz, 8W
DC 9V battery for backup time memory
(optional, alkaline batteries are recommended)
9" (Length)
Dimensions:
4 1/4" (High)
2 3/4" (Depth)
Frequency range:
FM 88 - 108MHz
AM 530 - 1700kHz
LIMITED WARRANTY
We warrant this product to be free from defects in material and
workmanship under normal use for a period of 90 days after
purchase and we will repair it free of charge or replace it at no charge,
should it become defective under this warranty, providing you submit
proof of purchase (sales slip) with the set.
During the initial 90 day period after original purchase, we will
service or exchange, at no charge, the set that is returned to
LENOXX ELECTRONICS CORP.(LENOXX will pay the shipping
back to you). After the initial 90 day period expires, and for a period
of 12 months from original purchase, we will repair the unit covering
any part(s) that need to be replaced at no charge, but will charge for
the cost of labor, return postage paid by LENOXX.
This warranty does not apply to any products which have been
subject to misuse, neglect or accident. This warranty does not cover
broken headphones or cabinet. UNDER NO CIRCUMSTANCES
WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to
you.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. The following
charges apply to repairs beyond the warranty period: $8.00. Be
sure to pack carefully and return postage paid insured together with
your money order (personal checks will not be accepted) and sales
receipt to :
LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE, CARTERET N.J. 07008
For customer service
Dial 1-800-315-5885
(MONDAY - THURSDAY 09:00 AM - 5:00 PM, FRIDAY 09:00 AM - 1:00 PM EST)
© 2000 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
7
CR-776_031500 NL v.2
E
Download from Www.Somanuals.com. All Manuals Search And Download.
|