Lenoxx Electronics CD Player CD 511 User Manual

®
COMPACT DISC PLAYER  
MW/FM DUAL CASSETTE RECORDER  
WITH REMOTE CONTROL  
MODEL CD-511  
OPERATING INSTRUCTIONS  
INCLUDES FULL FEATURE REMOTE CONTROL  
MULTI-COLOURED FLUORESCENT DISPLAY  
PLAYS MUSIC COMPACT DISCS  
SING ALONG WITH KARAOKE  
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY  
FUNCTION  
RECEIVES MW/FM STEREO BROADCASTS  
ROTARY BASS & TREBLE CONTROLS  
RECORDS FROM CD, TAPE OR RADIO  
2 WAY POWER - AC/DC  
REQUIRES 8 X LR20 (SIZE “ D ”) BATTERIES (NO INCLUDED)  
PLEASE READ CAREFULLY BEFORE USE  
Imported and distributed by Worldwide Retail Sourcing (UK) Limited  
491 Holloway Road London N19 4DD  
email address: [email protected]  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BATTERY SAFETY INSTRUCTIONS  
CAUTION:  
TO REDUCE THE RISK OF FIRE, PERSONAL INJURY OR DAMAGE TO THE  
PLAYER, PLEASE READ AND FOLLOW THESE INSTRUCTIONS.  
1. Use only the type and size of batteries stated in the operating instructions  
booklet (Batteries are not included with the player. Please buy the correct  
batteries).  
2. Do not dispose of the batteries by burning them as they may explode.  
Check with local regulations for any special instructions on the disposal of  
batteries.  
3. Do not open or dismantle batteries. Do not recharge non-rechargeable  
batteries.  
4. Be careful when handling batteries in order not to short-circuit them with  
conducting materials such as rings, bracelets and keys. The battery or  
conductor may overheat and cause burns.  
5. Do not attempt to extend the life of batteries for use with this product by  
heating them.  
6. All batteries should be replaced at the same time. Mixing old and new  
batteries could increase internal cell pressure and damage the batteries.  
7. When inserting batteries into this product, the correct polarity (  
direction must be observed.  
or  
) or  
8. Remove the batteries from the product if it is not to be used for a long period  
of time (several weeks or more).  
9. Remove old or flat batteries as soon as possible as they are more likely to  
leak in the product.  
10. Do not store the product in high temperature areas.  
11. Opening or removing covers may expose you to dangerous voltages or  
other risks. Incorrect reassembly may cause electric shocks when the  
appliance is subsequently used.  
12. If any liquid leaks from the batteries, wipe it up immediately. Do not let any  
of the liquid come into contact with your skin and discard the leaking  
batteries.  
13. Do not mix batteries (OLD and NEW or CARBON and ALKALINE etc.).  
14. The use of rechargeable batteries is not recommended for this player  
because their voltage and life is lower than those of standard batteries.  
15. Installation of batteries should only be done by an adult.  
PLEASE SAVE THESE INSTRUCTIONS  
2
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHOOSING A POWER SOURCE  
AC power or batteries may be used as a power source.  
AC SOCKET  
1. Connecting the AC power  
TIP  
cord  
Replace the batteries  
Insert one end of the supplied AC power cord (located  
in the polyfoam) into the socket located at the back  
of the player, and the other end into a wall outlet.  
when the display dims or  
when the player stops  
operating. Replace all  
batteries with new ones.  
2. Using battery power  
Insert 8 X LR20 (size “D”) batteries (not included)  
into the battery compartment.  
Before  
replacing  
batteries, make sure  
there is no CD in the  
player and remember to  
check the Battery Safety  
Instructions on Page 2.  
To use the player on batteries, disconnect the AC  
power cord from the player.  
U P P E R  
If the CD does not play  
L O W E R  
on batteries, this means  
the batteries are almost  
used up. But the radio  
may continue to play on  
these weak batteries  
because it uses less  
power than the CD  
player.  
VFD DISPLAY  
The VFD display only lights up when using AC  
power.  
3
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ATTACHING THE SPEAKERS  
1.Position one of the speakers to the right  
of the main unit.  
P
R
O
G.  
2.Align the tracks (rails) on the speaker with  
the main unit as shown in FIG. 1.  
FIG.1  
3.When the speaker tracks (rails) are lined  
up, push the speaker into the tracks (rails)  
on the main unit as shown in FIG. 2.  
P
ROG  
.
4.Repeat steps 1 to 3 above for the left side.  
FIG.2  
5.Carefully unwind the speaker wire from behind each speaker and insert the  
right plug into Speaker Jack R and the left plug into Speaker Jack L (as shown  
in FIG. 3). Wrap the remaining wire behind each speaker.  
LOCK TAB  
FIG.3  
NOTE: This player can be used with the speakers either attached to the main unit  
or standing alone so long as both speaker plugs are plugged into the  
jacks.  
To detach the speakers, press the lock tab and push the speakers out of  
the tracks (rails).  
4
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
The CD PLAYER can be operated with the REMOTE CONTROL provided (includes  
the following controls: POWER ON/OFF, MUTE, VOLUME, CD REPEAT and PLAY).  
NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER,  
make sure the POWER button on the main unit is turned on.  
Otherwise, the REMOTE CONTROL will not work.  
1. POWER ON/OFF  
2. MUTE  
3. REPEAT - ONE & ALL SONGS  
9
1
4. PROGRAMME  
5. VOLUME UP/DOWN  
8
6. SKIP/SEARCH BACKWARD  
7. SKIP/SEARCH FORWARD  
8. STOP  
2
3
7
9. PLAY/PAUSE  
NOTE: When you press the POWER  
ON/OFF button to switch the  
player off, the VFD display will  
go out and the STANDBY  
indicator on the main unit will  
come on.  
4
6
5
Slide the battery cover off to remove the batteries. Insert 2 X LR4 (size “AAA”)  
batteries (not included) correctly so that the + and - polarities match the polarity  
indicators inside the battery compartment.  
NOTE:  
About half a year of normal operation can be expected when using alkaline  
batteries.  
When the batteries are worn out, the remote control will stop working.  
Replace both batteries with new ones.  
When the remote control is not to be used for a long time (2 months or  
more), the batteries should be removed to avoid possible damage that may  
be caused by battery leakage.  
Avoid keeping the remote control in extremely hot or humid locations.  
The remote control will operate at a distance of between about 0.2m (8  
inches) and 6m (20 feet) from the remote sensor.  
5
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A CD  
3
5
1
2
6
PROG.  
Connect the supplied AC power cord or batteries (see page 3).  
Press the POWER button for the  
VFD display and AUDIO LEVEL to  
come on.  
1
2
Slide the FUNCTION switch to the  
CD position. Two dashes, “--” , will  
appear on the VFD display.  
Open the CD DOOR by pressing the  
bottom righthand corner of the CD  
door marked OPEN/CLOSE and  
place the CD in the CD  
compartment. The label side of the  
CD should face upward.  
3
O
C
P
E
N
L
O
S
E
CLOSE  
Close the CD DOOR by pushing it  
down. The display will show the total  
number of tracks (songs) on that  
CD.  
4
5
6
Press the CD PLAY button. The  
player will play all the songs (tracks)  
once in order.  
To change the sound effect, adjust  
the BASS and TREBLE knobs as  
desired.  
TIP: “  
” WILL APPEAR IN THE DISPLAY IF THERE IS NO DISC IN THE CD  
COMPARTMENT OR IF THE DISC IS UPSIDE DOWN.  
6
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USE THESE BUTTONS FOR  
ADDITIONAL OPERATIONS  
VOLUME CONTROL  
TIP  
The AUDIO LEVEL  
will light up when the  
power is on and  
the pointer will  
PROG.  
indicate  
any  
changes in audio  
levels.  
TIP  
When CD play is  
paused, “ ” will  
flash and the CD  
will stop playing.  
FUNCTION SWITCH  
To  
Press or Adjust  
Adjust the volume  
VOLUME control  
STOP  
Stop playback  
To resume play,  
press the PAUSE  
PLAY/PAUSE  
” will flash when a CD is in  
pause mode. Press again to  
resume play.  
button again, “  
will stop flashing  
and the CD will play.  
Pause playback  
Go to the next track  
TIP  
FORWARD  
BACKWARD  
If the player or the  
table it is sitting on  
is knocked while a  
CD is playing, the  
CD will stop or skip  
for a few seconds.  
This is normal for  
this type of player.  
Go back to the previous  
track  
or  
Press and hold down while  
playing until you find the  
point.  
Locate a point in a song  
Press the bottom righthand  
corner of the CD DOOR  
TIP  
This set has an  
electronic volume  
Remove the CD  
marked  
OPEN/CLOSE  
(press STOP first).  
control.  
The  
volume can be  
raised or lowered  
by pressing the  
VOLUME UP or  
DOWN button.  
Press the POWER button  
and the display will go off.  
Turn off the player  
To turn off the sound  
instantly  
Press the MUTE button on  
the REMOTE CONTROL.  
7
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPEAT PLAY  
PLAYING CD SONGS (TRACKS) REPEATEDLY  
CD tracks can be played over and over again in either normal or programmed play  
mode (see page 9). (NOTE: To use this feature, you need to operate the set with  
the REMOTE CONTROL, because there is no REPEAT button on the main unit.)  
POWER  
BUTTON  
REPEAT  
FUNCTION  
SWITCH  
1. Press the POWER button for the display to light up.  
2. Set the FUNCTION switch to the CD position.  
3. Select the track by pressing  
or  
, and then press  
.
4. Press the CD REPEAT button on the REMOTE CONTROL.  
To repeat  
Display shows  
Press  
a single track (song)  
Press the REPEAT  
button once  
“REP” will flash.  
REP  
Press the REPEAT  
button twice  
“REP” will stay  
on continuously  
all the tracks (all songs)  
programmed tracks  
Press the REPEAT  
R E P  
“REP” will stay  
on continuously  
button  
twice  
while  
programmed tracks are  
being played  
To cancel Repeat Play  
Press the REPEAT button until “REP” goes off.  
8
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAMMED CD PLAY  
SELECTING YOUR OWN MUSIC PLAYING ORDER  
PROGRAMME  
Up to 19 tracks may be programmed to play  
in whatever order you wish.  
NOTE: Programming is only done during  
STOP mode.  
During STOP mode, press the  
1
PROGRAMME button. “  
” and  
“PRG.” will flash in the display.  
Press  
buttons,  
the  
SKIP/SEARCH  
2
3
,
or  
until the  
desired track shows in the  
display.  
Press the PROGRAMME button.  
” and “PRG.” will flash in the  
display.  
Repeat steps 2 and 3 until all the  
desired tracks are programmed.  
4
5
Press the PLAY button to start  
programmed play. “  
” , “PRG.”  
and the track number being  
played will show in the display.  
To change the current programme  
Simply create a new programme by following the programing procedure.  
To cancel Programmed Play  
Press the STOP button twice and “PRG.” will disappear from the display.  
9
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LISTENING TO THE RADIO  
3
1
4
2
3
6
PROG  
.
Connect the supplied AC power cord or batteries (see page 3).  
Press the POWER button for the VFD  
display and the AUDIO LEVEL to  
come on.  
1
Set the FUNCTION switch to the  
RADIO position.  
2
3
Set the BAND switch to the proper  
band position (MW or FM), and the  
FM MODE switch to STEREO or  
MW  
FM  
MONO.  
Tune into the station of your choice  
using the TUNING control. Adjust for  
the clearest sound.  
4
“FM ST.” will appear in the VFD  
display when receiving FM Stereo  
broadcasts.  
5
6
To change the tone, adjust the  
BASS and TREBLE controls as  
desired.  
10  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USE THESE BUTTONS FOR  
ADDITIONAL OPERATIONS  
VOLUME  
FM MODE  
FUNCTION  
PROG.  
TIP  
To  
Press or Set  
If an FM broadcast is  
noisy, move the FM  
MODE switch from  
STEREO to MONO.  
VOLUME control (UP or  
DOWN).  
Adjust the volume  
Set the FUNCTION switch  
to the TAPE position or  
press the POWER button.  
Turn off the Radio  
This player has an  
electronic  
volume  
control. The volume  
can be raised or  
lowered by pressing  
the VOLUME UP or  
DOWN button.  
To improve broadcast reception  
Change position of the antenna for FM or FM Stereo.  
Move the player itself for MW.  
PROG.  
PROG.  
11  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING A TAPE  
1
2
PROG.  
4
3
Connect the supplied AC power cord or batteries (see page 3).  
Press the POWER  
button for the VFD  
display to come on.  
1
2
3
FU LL  
REEL  
EM PTY  
REEL  
A
Set the FUNCTION  
switch to the TAPE  
position.  
Press the STOP/EJECT  
STOP/EJECT  
INSERT THIS WAY  
button (DECK  
A
or  
DECK B) to open the  
tape compartment and  
insert a recorded tape.  
Close the door.  
PLAY  
Press the PLAY button.  
The player will come on  
and start playing the  
tape.  
4
5
When the player comes  
to the end of one side of  
the tape, it will stop. To  
listen to the other side  
of the tape, turn the tape  
over, insert and press  
PLAY.  
AUTO STOP  
12  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RELAY PLAY  
2
1
PROG.  
5
4
3
Connect the supplied AC power cord or batteries (see page 3).  
To play tapes in DECK A and then DECK B, follow the steps below:  
Press the POWER button for the VFD  
display and AUDIO LEVEL to come on.  
1
Set the FUNCTION switch to the TAPE  
position.  
2
Press the cassette PLAY button on  
DECK A for the tape in DECK A to play.  
PLAY  
3
Press the cassette PAUSE button on  
DECK B.  
PAUSE  
PLAY  
4
Press the cassette PLAY button on  
DECK B. When DECK A finishes playing,  
DECK B will automatically start playing.  
5
6
When the player reaches the end of  
the tape in DECK B, it will stop.  
13  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USE THESE BUTTONS FOR ADDITIONAL  
CASSETTE TAPE OPERATIONS  
VOLUME  
CONTROL  
PROG.  
PAUSE  
PLAY  
PAUSE  
STOP/EJECT  
PLAY  
FAST F.&REWIND  
STOP/EJECT  
RECORD  
FAST F.&REWIND  
To  
Press or Adjust  
Press the VOLUME button  
(UP or DOWN)  
Adjust the volume  
Stop playback  
STOP/EJECT button  
Fast forward or rewind  
Pause playback  
FAST FORWARD button or  
REWIND button  
PAUSE button  
Press again to resume play  
STOP/EJECT button  
Eject the cassette  
To enjoy music without  
Insert your headphone plug  
into the HEADPHONE jack (at  
the front of the player).  
disturbing  
others  
(headphones are not  
included)  
PROG.  
Make sure none of the cassette  
buttons are down (on) and the  
POWER button is off.  
To turn the power off  
14  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORDING ONTO A TAPE  
1
PROG.  
3
MICROPHONE JACK 4  
2
Connect the supplied AC power cord or batteries (see page 3).  
Press the POWER button for the VFD display and AUDIO  
LEVEL to come on.  
1
2
Press the STOP/EJECT button (DECK  
STOP/EJECT  
B) to open the tape compartment and  
insert a blank tape. Select the source  
(MW, FM, CD, or microphone) you wish  
OK  
NO  
to record from.  
To record from the CD player, set the FUNCTION switch to  
the CD position, insert a CD and follow the steps for playing  
a CD (see page 6).  
To record from the radio, set the FUNCTION switch to the  
RADIO position, and tune into the desired station (see page  
10).  
To record from the microphone, set the FUNCTION switch to  
the TAPE position, and plug the microphone (not included)  
into the MICROPHONE JACK. Speak into the microphone.  
To record from DECK A, set the FUNCTION switch to the  
TAPE position and follow the steps for playing a TAPE (see  
page 12).  
3
OR  
OR  
THEN  
RECORD  
4
Press the RECORD button to start recording. (The PLAY  
button will automatically be depressed.)  
PLAY  
REWIND  
To listen to what you have recorded, set the FUNCTION  
switch to the TAPE position, press REWIND and then  
PLAY.  
5
15  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USE THESE BUTTONS FOR  
ADDITIONAL OPERATIONS  
PROG.  
TIP  
DOUBLE SPEED SWITCH  
PAUSE  
For best recording  
effect, use AC power  
instead of batteries.  
STOP/EJECT  
To erase a recording,  
simply start a new  
recording, and the  
old one will auto-  
matically be erased.  
Press or Set  
To  
Stop recording  
STOP/EJECT button  
Pause recording  
PAUSE button  
Press the button again to  
resume recording.  
See page 20 for  
notes on cassettes.  
Adjust recording  
speed when copying  
tapes  
DUBBING SPEED  
switch from NORMAL to  
HIGH speed.  
Press the STOP/EJECT  
button and the POWER  
button. The VFD display  
will go off.  
Turn off the power  
16  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SING ALONG WITH KARAOKE FUNCTION  
VOLUME  
PROG.  
MIC  
VOLUME  
MICROPHONE JACK  
2
Connect the supplied AC power cord or batteries (see page 3).  
Insert the microphone plug into the microphone  
jack. To avoid howling from the microphone, lower  
the volume level first.  
1
2
NOTE: Microphone is not included. You can  
purchase one at the shop where you  
purchased your player.  
To sing along with the CD player, set the FUNCTION  
switch to the CD position, insert a KARAOKE CD  
disc and follow the steps for playing a CD (see  
page 6).  
To sing along with a tape, set the FUNCTION switch  
to the TAPE position, insert a KARAOKE TAPE  
into Deck A or B, and follow the steps for playing a  
TAPE (see page 12).  
3
4
Press the CD PLAY/PAUSE button on the CD  
player or the PLAY button on Deck A or B.  
PLAY  
Adjust the volume controls (both the VOLUME  
control on the player and the MICROPHONE  
VOLUME control) to achieve the best effect.  
17  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USE THESE BUTTONS FOR ADDITIONAL  
OPERATIONS  
PROG.  
VOLUME  
CONTROL  
MIC VOLUME  
BASS  
TREBLE  
To  
Press or Adjust  
Adjust the MIC volume  
MIC. VOLUME  
Adjust the CD or TAPE  
volume  
VOLUME control  
Adjust the sound effect  
for low or high tones.  
BASS or TREBLE  
control.  
TIP: If any squealing or howling (feedback) occurs during KARAOKE  
use, move the microphone away from the speakers or turn down  
the volume.  
18  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
Safety  
Power Sources  
The laser beam used in the CD player  
For battery operation, use 8 X LR20  
section could damage your eyes so  
you should never attempt to take the  
cabinet apart. Refer servicing to  
qualified personnel only.  
(size “D”) batteries (not included). We  
recommend alkaline batteries for  
longer life.  
When the batteries will not be used  
If any solid object or liquid gets into  
for several weeks or more, they should  
be removed to avoid damage that  
could be caused by battery leakage  
or corrosion.  
the player, unplug it, and have it  
checked by qualified personnel before  
operating it again.  
Location  
Operation  
Do not leave the player near a heat  
If the player is moved directly from a  
cold to a warm location or is placed  
in a very damp room, moisture may  
condense on the lens in the CD player  
section. Should this occur, the player  
will not operate properly. In this case,  
remove the CD and wait about an hour  
for the moisture to evaporate. If the  
player has not been used for a long  
time, put it in playback mode to warm  
up for a few minutes before inserting  
a CD.  
source in direct sunlight or where it  
might be exposed to excessive dust  
or mechanical shocks.  
Do not place the player on a sloping  
or unstable surface.  
Do not place anything within one inch  
of the back of the cabinet. The  
ventilation holes must not be covered  
for the player to operate properly and  
to prolong the life of its components.  
If the player is left in a car parked in  
the sun, be sure to put it somewhere  
in the car where it will not be in direct  
sunlight.  
This CD player is designed to be  
played on a stable, vibration-free  
surface. If it is knocked while a CD is  
playing, the CD will stop or skip for a  
few seconds. This is normal for this  
type of player.  
Powerful magnets are used in the  
speakers so personal credit cards  
using magnetic coding and spring-  
wound watches should be kept away  
from the player to prevent possible  
damage from the magnets.  
19  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS (continued)  
CDs  
Cassettes  
Break off the cassette tab from Side  
Before playing, clean the CD with a  
A or B to prevent accidental recording.  
cleaning cloth. Wipe the CD from the  
centre out.  
Side A  
Do not use solvents such as benzene,  
Tab for side A  
Tab for side B  
thinner, commercially available  
cleaners or anti-static spray intended  
for vinyl LPs.  
Do not expose CDs to direct sunlight  
To record on a tape with its tab broken  
off, cover the respective tab hole for  
Side A or B with adhesive tape.  
or heat sources such as hot air ducts,  
or leave them in a car parked in direct  
sunlight as the temperature inside the  
car could get extremely hot and cause  
damage to the CDs.  
Use of a cassette with more than 90  
minutes, such as C-120 (120  
minutes), is not recommended. The  
extreme thinness of this tape may  
damage this set.  
Do not attach paper or stickers to CDs  
or scratch them.  
After playing, CDs should be stored in  
their cases. If there is a scratch, dirt  
or fingerprints on the CD, tracking  
errors or skipping may occur.  
To reduce the chance of tapes  
jamming or tangling, check that there  
is no tape slack visible through the  
window in the centre of the cassette.  
Any tape slack should be taken up  
with a pencil before inserting the  
cassette into the player.  
20  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
Cleaning the Lens  
Storage Cassette  
Tapes  
If the lens is dirty, skipping may occur  
while the CD is playing. Clean with a  
commercially available lens cleaner and  
blower.  
1. Never place tapes near a magnetic  
field such as a TV, or speaker.  
Magnetic fields may reduce tape  
sensitivity or even erase recording.  
2. Do not store tapes for any length of  
time in hot, damp or dusty locations.  
Cleaning the Tape Heads  
Wipe the heads, the pinch roller and  
the capstan with a cleaning swab slightly  
moistened with cleaning fluid or alcohol  
after every 10 hours of operation for  
optimum playback and recording quality.  
After cleaning, wait until the areas  
cleaned are completely dry before  
inserting a tape.  
Cleaning the Cabinet  
Clean the cabinet, panel and controls  
with a soft cloth slightly moistened with  
a mild detergent solution. Do not use  
any type of abrasive pad, scouring  
powder or solvent such as alcohol or  
benzene.  
COTTON SWAB  
CAPSTAN  
PINCH ROLLER  
ERASE HEAD  
RECORD/PLAY BACK HEAD  
NOTE: In order to see and clean the  
head(s), you may have to  
press PLAY first.  
21  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
Problem  
Remedy  
Connect the AC power cord securely to a wall outlet.  
Make sure the batteries are inserted correctly and  
are not worn out.  
The power is not on.  
Make sure the FUNCTION switch is in the correct  
position.  
Adjust the volume.  
Unplug the headphones when listening  
through the speakers.  
There is no sound.  
You may be using battery power. The VFD display  
will only light up when AC power is used.  
VFD display does not light up.  
” appears in the display even  
Insert the CD with the label side up.  
when a CD is in place.  
Make sure that the CD compartment is closed.  
Clean the CD.  
Remove the CD and leave the CD DOOR open for  
about an hour to get rid of moisture condensation.  
Make sure the FUNCTION switch is in the CD position.  
CD does not play.  
Clean the CD or replace it if it is badly damaged.  
Place the player in a location free from vibrations.  
Check that the batteries are not worn out.  
The sound drops out.  
CD does not play while radio may  
continue to play.  
It is normal since the radio uses less power than  
the CD player.  
Replace all the batteries with new ones if  
they are low, move the player close to a  
window for better MW reception or rotate it  
Sound is weak or sound quality is  
poor.  
for better FM reception.  
Make sure the safety tab on the cassette  
is in place (see page 20).  
Make sure the FUNCTION switch is in the  
The RECORD button does not  
function/The tape does not play.  
TAPE position.  
Clean the erasing head (see page 21).  
Replace all the batteries with new ones if they are  
low.  
The tape does not erase  
completely.  
Make sure the tape is inserted correctly.  
Make sure the safety tab on the cassette is in place.  
The tape does not record.  
Clean the heads, pinch roller and capstan  
(see page 21).  
Sound is weak or sound quality is  
poor.  
The tape has reached the end of one side. Remove,  
turn over and re-insert.  
Cassette PLAY button pops up.  
Tape jamming or tangling  
Use only better quality tapes.  
Do not use a cassette with more than 90 minutes.  
Make sure there are no loose layers of tape visible  
before inserting the cassette.  
22  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATION  
General Description  
Power source:  
AC 240V, 50Hz 20Watts  
DC 8 X LR20 (size “D”) batteries (not included) for  
player  
DC 2 X LR4 (size “AAA”) batteries (not included) for  
Remote Control  
(Alkaline batteries are recommended)  
50 - 125mm 4 ohm woofers  
50 - 75mm 4 ohm tweeters with crossover  
5.0W/channel  
Speakers (2 ways):  
Output power:  
Dimensions (approx.):  
MAIN UNIT  
265MM  
Depth: 220MM  
Height: 260MM  
Weight: 2.0KG  
SPEAKER  
172MM  
195MM  
315MM  
1.3KG  
Width:  
CD Section  
Type of disc played:  
Laser wavelength:  
Tracking method:  
Any normal CD used in portable players  
760 - 800 NM  
3 - spot error detection  
3.86 mm lens  
Frequency response: 50Hz - 15kHz +1/-2 dB  
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).  
It will not play CDRW encoded discs.  
Tape Recorder Section  
Frequency response: Standard normal bias cassette tapes  
70Hz - 10kHz  
Radio Section  
Tuning range:  
FM: 88 - 108 MHz  
MW: 530 - 1600 kHz  
LENOXX reserves the right to make design and specification changes for  
product improvement.  
PROTECT YOUR FINE FURNITURE!  
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL IS PUT UNDER  
THE PLAYER WHEN IT IS PLACED ON SURFACE WITH A NATURAL OR LACQUER  
FINISH.  
23  
IB-CD511(TA)-SW-E-091002  
Download from Www.Somanuals.com. All Manuals Search And Download.  

La Crosse Technology Thermometer IR 101 User Manual
Learning Resources Baby Toy LER 8700 User Manual
Life Fitness Home Gym CMDAP User Manual
Life Fitness Treadmill 97TEZ User Manual
Link electronic Stereo Amplifier PAA 652 User Manual
Marantz CD Player SA8400 User Manual
Marmitek Universal Remote Powermid XLTM User Manual
Marshall electronic Computer Monitor V R261P AFHD User Manual
Marvel Industries Beverage Dispenser 30WCM User Manual
Metra Electronics Automobile Accessories 99 9100 User Manual