PORTABLE CD/MP3 PLAYER
WITH AM/FM STEREO RECEIVER
MODEL CD-2086
OPERATING INSTRUCTIONS
PLAYS ALL MUSIC COMPACT DISCS, CD-R, CD-RW, MP3 & WMA
RECORDED DISCS
•
FULLY PROGRAMMABLE PLAYBACK
•
•
•
•
•
•
60 SECOND (CD) & 120 SECOND (MP3) ANTI-SKIP PROTECTION
ANALOG TUNER WITH DIGITAL READOUT AM/FM STEREO RECEIVER
REPEAT ONE AND REPEAT ALL PLAY
2 WAY POWER - AC/DC
USES 8 SIZE “C” BATTERIES (not included)
PLEASE READ CAREFULLY BEFORE USE
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
1
3/22/2005, 5:52 PM
IMPORTANT SAFETY INSTRUCTIONS
15. Servicing - Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
16. Damage Requiring Service -Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance - this indicates a need
for service.
17. Replacement Parts - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorised substitutions may result in
fire, electric shock, or other hazards.
18. Safety Check - Upon completion of any services or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in
proper operating condition.
ADDITIONAL SAFETY INSTRUCTIONS
1.Power Sources - The appliance should be connected to a power supply
only of the type described in the operating instructions or as marked on the
appliance.
2.Wall or Ceiling Mounting - The appliance should not be mounted to a wall or
ceiling.
3.Object and Liquid Entry - Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through openings.
4.Servicing - The user should not attempt to service the appliance beyond
that described in the operating instructions. All other servicing should be
referred to qualified service personnel.
Do not apply oil or petroleum products or solvents to any part of this set.
CAUTION
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as
stated on the bottom of the set.
Please read important information displayed on the rating plate located on the
bottom enclosure before connecting to AC Mains or any operation.
IB-CD2086(AD)-WM-E-031705
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
3
3/22/2005, 5:52 PM
BATTERY SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE
TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS.
1. Use only the type and size of batteries mentioned in the operating instructions
booklet (batteries are not included with this set, please buy the proper batteries).
2. Do not dispose the batteries into a fire. The cells may explode. Check with local
codes for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
4. Be careful when handling batteries in order not to short the battery with
conducting materials such as rings, bracelets and keys. The battery or
conductor may over heat and cause burns.
5. Do not attempt to recharge non-rechargeable batteries. The batteries may leak
corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the batteries identified for use with this product by
heating them. Sudden release of the battery electrolyte may cause burns or
irritation to eyes or skin.
7. All batteries should be replaced at the same time. Mixing fresh and discharged
batteries could increase internal cell pressure and rupture the batteries.
8. When inserting batteries into this product, the proper polarity (
and
) or
direction must be observed. Reverse insertion of some or all of the batteries
may result in battery electrolyte leakage or explosion.
9. Remove the batteries from this product if the product will not be used for a long
period of time (several months or more) since during the period the batteries
could leak, damaging the product.
10. Discard weak or dead batteries as soon as possible since they are more likely
to leak in the product. Batteries should be replaced (depending on the product)
when the display gets dim or if the Low Battery Indicator shows or if the sound
gets distorted.
11. Do not store this product in high temperature areas. Batteries that are stored in
a freezer or refrigerator for the purpose of extending shelf life should
be protected from condensation during storage and defrosting. Batteries should
be stabilized at room temperature prior to use after cold storage.
12. If this product does not operate normally, see TROUBLE SHOOTING in this
instruction manual. If you can’t resolve the problem, or if the product is damaged,
refer to the LENOXX WARRANTY INFORMATION. Opening or removing
covers may expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the appliance is subsequently used.
13. If liquid leaks from the batteries, carefully wipe this liquid. Do not allow it to
touch your skin, and discard the leaking batteries.
14. Do not mix batteries (OLD and NEW or CARBON and ALKALINE, etc.).
15. The use of rechargeable batteries is not recommended for this set because
their voltage and life is lower than standard batteries.
16. Installation of batteries should be done by an adult only.
SAVE THESE INSTRUCTIONS
3
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
4
3/22/2005, 5:52 PM
CHOOSING THE POWER SOURCES
You can use the AC power or batteries as a power source.
To a wall outlet
NOTE: One blade of
plug and outlet is wider.
BATTERY DOOR
AC SOCKET
(on the bottom of the set)
TIP:
1. Connecting the AC power
If the plug of the AC power
cord does not match your
outlet, do not force it.
Reverse it and try again.
The plug is polarized and
only fits one way into the
wall outlet and rear of the
set.
•
Insert one end of the supplied AC power cord into the
socket located at the rear of the set, and the other
end into the 120V, 60 Hz standard household outlet.
2. Using the player on batteries
Insert 8 size “C” batteries (not supplied) into the
battery compartment as shown. Observe (+) and
(-) polarities.
To use the player on batteries, disconnect the AC
power cord from both the outlet and the back of the
player.
Replace all the batteries
with new ones when the
LCD display dims or the
player stops operating.
Before you replace all the
batteries, be sure to take
out the disc from the player
and remember to check the
Battery Safety Instructions
on Page 3.
•
If the discs do not play on
batteries, this means the
batteries are almost used
up. But the radio may
continue to play on these
weak batteries because it
uses less power than the
disc player.
•
C
C
C
C
Install Batteries as illustrated
4
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
5
3/22/2005, 5:52 PM
PLAYING A CD
Open the disc door by
lifting here
FUNCTION
switch (at the left
side of the set)
Connect the supplied AC power cord or batteries (refer to page 4).
Slide the FUNCTION switch
1
2
FUNCTION
OFF
to the CD/MP3 position
(power on), the LCD display
will be on, and the word
“READING ” will show in the
display.
RADIO
CD/MP3
Lift the CD DOOR to open it
and push a CD down onto
the center spindle. The label
side of the CD disc should
face upward.
Close the CD DOOR. The
display will show the total
tracks and total playing time
of that CD, then the player
3
CD
will
begin
to
play
Track number
automatically.
currently playing
TIP:
1. “ NO DISC ” will show in the display if there is no CD disc in the CD compartment
or if the CD disc is upside down.
2. “ OPEN ” will show in the display when the CD DOOR is opened.
5
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
6
3/22/2005, 5:52 PM
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
Open the CD DOOR
STOP button
by lifting here
PLAY/PAUSE button
PHONES jack
PROGRAM/EQ
button
FUNCTION
switch
CD
MODE button
VOLUME
control
Elapsed playing time
of the current track
+10 button
SKIP/SEARCH
BACKWARD button
SKIP/SEARCH
FORWARD button
TIP
When the CD play
is paused, the word
“PAUSE” will show in
the display, the
•
Press or Adjust
VOLUME control
To
Adjust the volume
STOP button
Stop playback
elapsed
playing
time of the currently
playing track will
flash and no music
will play.
Press PLAY/PAUSE, the word
“PAUSE” will show in the display
and the elapsed playing time of the
currently playing track will flash
during pause. Press again to
resume play after pause.
Pause playback
To resume play,
press the PLAY/
•
•
PAUSE
again.
button
Go to the next track
SKIP/SEARCH FORWARD
Go back to the
previous track
SKIP/SEARCH BACKWARD
Press the +10 button.
If you just start to
play disc, the
music may stop or
skip for few
a
Go to the next 10th
track
a
seconds. If the
music is playing for
a few minutes and
has time to load, the
music will not skip.
or
Locate a point in a
song
Press and hold down while playing
till you find the point.
Press the STOP button first, then
lift the CD DOOR.
Remove the CD
Slide the FUNCTION switch to the
OFF position, LCD display turns
off.
Turn off the power
To enjoy the music
Insert your headphones (not
included) plug into the PHONES jack.
without
others
disturbing
6
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
7
3/22/2005, 5:52 PM
CD REPEAT, INTRO AND RANDOM PLAY
You may have repeat, intro and random play functions by pressing the MODE button.
Press the MODE button several times, the display will show the followings in turn:
REPT 1
REPT ALL
INTRO
RANDOM
NORMAL PLAY
Single Track Repeat
Plays one song over and over till you press STOP.
MODE
X 1
Select the song you want to repeat with either of the SKIP/
SEARCH buttons (
or
), or +10 button. Press the
REPT
1
MODE button once, REPT 1 will show in the display.
CD
The song currently playing will repeat over and over until
you press the STOP button.
All Tracks Repeat (Disc Repeat)
Repeats all songs in order till you press STOP.
MODE
Press the MODE button twice, REPT ALL will show in the
X 2
display.
All the songs will keep playing in sequence 1, 2, 3, etc.
and when finished, the player will start all over again until
you press the STOP button.
REPT
ALL
CD
Intro Play
This plays the first 10 seconds of each song in sequential
order.
MODE
Press the MODE button three times, INTRO will flash in the
display. Press the PLAY/PAUSE button once, the first 10
seconds of each song on the CD will play in sequential
order, INTRO will stop flashing and show in the display.
X 3
CD INTRO
When you find a song you like, press the PLAY/PAUSE
button again, INTRO will not show in the display, normal
play will be resumed, that song (and the following songs)
will play normally.
Random Play
This plays the songs on the disc in random order.
MODE
X 4
Press the MODE button four times, RANDOM will flash in
the display. Press the PLAY/PAUSE button once, the player
begins random play, RANDOM will stop flashing and show
in the display.
RANDOM
CD
Press the SKIP/SEARCH button (
random song.
) to skip to the next
To quit random play, press the MODE button once again,
the player will play normally.
7
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
8
3/22/2005, 5:52 PM
CD PROGRAMMED PLAY
You can make a program up to 20 tracks in the specified order you want them to be
played.
Programming Example
etc.
etc.
Program Number
1
3
6
4
8
1
2
5
4
1
5
2
7
1
Track Number (song number)
2
8
PROG
CD
1. Slide the FUNCTION switch to the CD/MP3 position.
Make sure the set is in the STOP mode.
2. Press the PROGRAM/EQ button once. The letters
“
“
PROG” will show in the display, and the letters
Program number
” will flash in the display .
PROG
CD
3. Press the SKIP/SEARCH buttons (
or
) or +10
button to select the tracks to be programmed in the
order that you want.
4. Press the PROGRAM/EQ button to confirm. The
program number 2 will now show in the display,
ready for your next selection of track.
Track number
PROG
CD
5. Repeat above steps 3 and 4. You can program up to
20 tracks.
6. After programming is finished, press the PLAY/PAUSE
button to start programmed play.
PROG
CD
NOTE:
1. Programming can only be done in STOP mode.
2. The programmed memory will be lost if the STOP button is pressed twice, or the
alkaline batteries are exhausted or removed, or AC power is shut off, or the CD
DOOR is opened.
3. The player will stop automatically after all the programmed tracks have been
played.
To change the current program
Just create a new program following the above programming procedure.
To cancel Programmed Play
Press the STOP button twice, the symbol PROG will disappear from the display.
EQUALIZER FUNCTION
During play, you may select the tone type by pressing the PROGRAM/EQ button to
choose the tone type. The display will show what you selected:
DBB, POP, CLASSIC, JAZZ, ROCK or NORMAL.
8
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
9
3/22/2005, 5:52 PM
MP3 PLAYBACK
Open the disc door
by lifting here
FUNCTION
switch (at the left
side of the set)
Connect the supplied AC power cord or batteries (refer to page 4).
Slide the FUNCTION switch to
FUNCTION
1
2
3
OFF
the CD/MP3 position (power on),
RADIO
CD/MP3
the LCD display will be on, and
the word “READING ” will show
in the display.
Lift the CD DOOR to open it and
push an MP3 disc down onto the
center spindle. The label side of
the disc should face upward.
Close the CD DOOR. The
display will show the total albums
and total tracks of that MP3 disc,
then the player will begin to play
automatically.
MP3
Album
number
Track
Playing
time
number
General Information
1. Usually, you must “write” your own MP3 disc on your computer’s CD writer. Or,
you may buy pre-recorded MP3 discs from some “on line” sources.
2. When saving songs (audio files) onto your CD-R (or CD-RW), you must save
them as “.MP3” (DOT MP3) or “.WMA” (DOT WMA) files. Do not save them as
.DOC or .TXT, .PDF etc. when downloading, converting or saving files as MP3
or WMA files. Also, the files must be recorded in MP3 or WMA format.
3. Do not save TXT files as “.MP3” files because they will not play and they may
interfere with the set.
4. Do not attempt to combine normal CD audio tracks and MP3 tracks onto one CD
because the set will only recognize the audio tracks and play those, but you can
combine MP3 tracks & WMA tracks onto one CD.
9
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
10
3/22/2005, 5:52 PM
OTHER MP3 OPERATIONS
Display window shows
Operation
Press
MP3
PLAY/PAUSE
button
To pause play
MP3
To release pause and
resume play
PLAY/PAUSE
button
MP3
STOP button
To stop
STOP button once and slide the FUNCTION to
OFF position.
To turn off the power
SKIP/SEARCH FORWARD button
repeatedly)
once (or
To skip to the next track(s)
Press the +10 button once, every time you press
it, the player will skip to the next 10th track or the
end track of the album.
To skip to the next 10th
track(s) quickly
To skip to the previous
track(s)
SKIP/SEARCH BACKWARD button
(or repeatedly)
once
Keep SKIP/SEARCH FORWARD button
depressed and release it when the desired music
section of the disc is found.
To go ahead at high speed
(search)
Keep SKIP/SEARCH BACKWARD button
depressed and release it when the desired
music section of the disc is found.
To go back at high speed
(search)
Press the ALBUM button during play or in STOP
mode, the album number flashes. Press the SKIP/
SEARCH buttons (
or
) to choose the
To change the ALBUM
album. Press the PLAY button to start the selected
album play.
Press the PROGRAM/EQ button to choose the
tone type during play. The display will show what
you selected:
To change the Tone type
DBB, POP, CLASSIC, JAZZ, ROCK or NORMAL.
TIP:
1. “ NO DISC ” will show in the display if there is no disc in the CD compartment or the
MP3 disc is upside down.
2. “ OPEN ” will show in the display if the CD DOOR is opened.
3. It may take about 10 to 30 seconds to read the disc depending on how many
albums and songs are recorded on your MP3 disc.
10
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
11
3/22/2005, 5:52 PM
MP3 REPEAT, INTRO AND RANDOM PLAY
You may have repeat, intro or random play functions by pressing the MODE button. Press
the MODE button several times, the display will show the followings in turn:
REPT 1
REPT DIR
REPT ALL
INTRO
RANDOM
NORMAL PLAY
Single Track Repeat
MODE
X 1
Plays one song over and over till you press the STOP button.
Select the song you want to repeat with either of the SKIP/
SEARCH buttons (
or
) or +10 button. Press the
MODE button once, REPT 1 will show in the display.
The song currently playing will repeat over and over till you
press the STOP button.
MP3
REPT 1
All Tracks Repeat (Directory Repeat)
Repeats all single album songs in order till you press the
STOP button.
MODE
MODE
MODE
X 2
Select the directory (or album, folder) that you want to repeat
with ALBUM button and the SKIP/SEARCH buttons (
or
). Press the PLAY/PAUSE button, then press the MODE
MP3
MP3
MP3
REPT DIR
button twice,
will show in the display.
All the songs RoEf PthTaDtIRdirectory will keep playing in sequence 1,
2, 3, etc. and when finished, the player will start all over again
until you press the STOP button.
All Tracks Repeat (Disc Repeat)
X 3
Repeats all songs in order till you prReEsPsTthAeLLSTOP button.
Press the MODE button three times,
display.
will show in the
All the songs of the MP3 disc will keep playing in sequence 1,
2, 3, etc. and when finished, the player will start all over again
REPT
ALL
uInnttilroyoPu lpareyss the STOP button.
This plays the first 10 seconds of songs in sequential order.
Press the MODE button four times, INTRO flashes in the
display.
X 4
Press the PLAY/PAUSE button, the first 10 seconds of each
song on the MP3 disc will play in sequential order, INTRO will
stop flashing and show in the display.
INTRO
When you find a song you like, press the PLAY/PAUSE button
again, normal plaNyOwRiMllAbLeLYresumed, that song (and the following
songs) will play
.
Random Play
This plays the songs on the disc in random order.
Press the MODE button five times, RANDOM will flash in the
display.
MODE
X 5
Press the PLAY button, this will play alRl AoNfDtOhMe songs in
random order selected by the player,
flashing and show in the display.
will stop
MP3
RANDOM
Press the SKIP/SEARCH button(
random song.
), to skip to the next
To quit random play, press the MODE button again, the
player will resume play normally.
11
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
12
3/22/2005, 5:52 PM
MP3 PROGRAMMED PLAY
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example
etc.
etc.
etc.
Program Number
2
6
5
3
10
8
4
4
1
6
7
4
8
5
1
1
3
3
5
1
2
7
2
1
Album Number (title number)
Track Number (song number)
During programming, the symbol “PROG” shows in the display. To program play in your
preferred order, follow steps below:
1. Slide the FUNCTION switch to the CD/
MP3 position. Make sure the set is in
STOP mode (the total album number and
track number show in the display).
5. Press the SKIP/SEARCH (
or
)
or +10 button to select the track
number (example 1).
PROG
2. Press the PROGRAM/EQ button, the
symbol “PROG” will show in the display
and the album number “ ” will flash.
PROG
6. Press the PROGRAM/EQ button to
confirm. Track 1 is now programmed.
The program number 2 will show in
the display, ready for the next
selection of track.
3. Press the SKIP/SEARCH (
or
)
buttons to select the title number 3
(example).
PROG
PROG
7. Repeat above steps 3 to 6, you can
program up to 20 tracks.
4. Press the PROGRAM/EQ button to
confirm. Title 3 is now selected, and
the display will show:
8. After programming is finished, press the
PLAY button to begin programmed play.
PROG
NOTE:
1. Programming can only be done in STOP mode.
2. The programmed memory will be lost if the STOP button is pressed twice, or the
alkaline batteries are exhausted or removed, or AC power is shut off, or the CD
DOOR is opened.
3. The player will stop automatically after all programmed tracks have been played.
To change the current program
Just create a new program following the programming procedure.
To cancel programmed play
Press the STOP button twice, the symbol PROG will disappear from the display.
12
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
13
3/22/2005, 5:52 PM
Basic Introduction to MP3 and WMA
MP3 files are music files which have been compressed into the MP3 format. WMA is
the abbreviation for Windows Media Audio. WMA is another audio format, the
compression and the audio quality are better than MP3. The CD-2086 plays MP3 &
WMA files which have been recorded onto•aYCouDcdainscp.lay MP3 or WMA songs on most
• The first thing you will need is an IBM
new computers or you can highlight them
for downloading & “burning” (recording)
them onto a CD later. Note your CD-2086
will play MP3 or WMA songs which end in
the extension “.MP3” (dot MP3) or “.WMA”
(dot WMA). You can select how to save a
file, select .MP3 or .WMA as the correct
extension on your computer. Do not save
• tIhf eyfoilue wwiathntotthoerceoxntveensrtionysoulirkeex.tixst)ting
records or tapes to MP3 discs, you will
need to record them using a sound card.
You will also need software such as
MusicMatch or RealJukebox and a set
of audio cables to connect your tape
player to your sound card.
compatible PC computer (at least
Pentium class) or an apple computer
(at least G3 class) with lots of RAM
and a CD-R or CD-RW recorder. Then
you will need some software. Either it
is in your new computer already or you
may have to buy this from MusicMatch
or a similar company. You may go to
you will need to make (record) a disc
with your MP3 or WMA files (songs) on
• tWheemr.ecommend you get some books
or information on the Web to help you
learn this way to store & play hundreds
of songs in MP3 or WMA format. Also
you may search the web for “MP3” or
“WMA” and you will immediately find a
world of information and songs.
NOTE: Most audio CD players can’t play
MP3 or WMA files, the CD-2086
can play MP3, WMA and normal
music files but not if they are mixed
on one CD.
• If you want to record MP3 or WMA files
from music CD’s, first “rip” (copy) the
music onto the hard disc. Ripping is
• mTourcehcofardstaerdtishcaninrMecPo3rdoirngW. MA, select
a setting in your computer or download
an MP3 or WMA creation plug in
program to enable recording discs in
MP3 or WMA format.
• To download an MP3 file (song) from a • Titles and song names can be viewed
search link at the top of the homepage
that allows you to search for MP3 files.
Input a key word and click on that link
and you will find many songs by many
new artists. To download an MP3 file,
click on software, then get MP3 link or
newer software, register and click on
download. We recommend you make
a new folder for your MP3 files.
by the text display of your CD-2086. But
in most cases above, you will need to
enter the names of the songs. Also, if
you put all songs in one album, it may
be difficult for you to locate a particular
song. We recommend several albums
on a single CD with each album
containing multiple songs. CDDB
can help you name songs and artists
and has useful information on latest
• sAolsnogsdoann’dt faorrtgisettsy. our computer savvy
friends. Sometimes a friend can show
you how to do something easily and
quickly, in a few minutes which could
take you an hour of reading to learn.
• Successful recording of a CD needs
an uninterrupted stream of high speed
data. For best results, limit or close
your other programs on the computer
while recording to prevent buffer
• uPnadyerfrournsd.ownloaded songs, illegal
copies of songs are not the correct
way to build your song library.
13
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
14
3/22/2005, 5:52 PM
ABOUT “MP3”
WHAT IS MP3?
SETTINGS FOR COMPRESSION
SOFTWARE AND WRITING
SOFTWARE
MP3 (MPEG 1 Audio Layer-3) is
a
standard technology and format for
compressing a sound sequence or song.
The file is compressed to about 1/10 of its
original size. Sounds outside the range of
human hearing are compressed while the
sounds we can hear are not compressed.
To compress a source for an MP3 file,
•
we recommend setting the transfer bit
rate of the compression software to
“44.1 kHz”, “128kbps”, and “Constant
Bit Rate”.
Please check the maximum capacity
•
PLAYABLE “MP3” FILES ON
of your CD-R / CD-RW as they come
in a different capacity ranges.
THIS PLAYER
You can only play MP3 files recorded by
following requirements.
To record at one time up to the
•
maximum capacity on media that has
nothing recorded it, set to “Disc at
Once”.
NOTE: While this player can play most
MP3 files it cannot play all files
and may not play all MP3
formats.
NOTES FOR SAVING FILES ON
THE MEDIA
Usable media
When the disc is inserted, the player reads
all the files on that disc. If there are many
folders or non-MP3/WMA files on the disc,
it may take a long time for play to begin or
for the next MP3/WMA file to start play.
CD-Rs and CD-RWs
Usable disc format
You can use ISO 9660 Level 1/2 and
Joliet extension format discs.
Do not save unnecessary folders or files
other than MP3 or WMA ones in the disc to
be used for MP3 listening.
DO NOT record any other files other than
MP3 or WMA files on the CD disc. If you
record non-mp3 files onto the CD disc, the
player may not operate properly. Please
record only MP3 or WMA files onto the CD
disc.
NOTE: CD-Rs or CD-RWs playback
capability at this CD/MP3 player
may vary depending on quality of
media, CD-Burner, speed of
burning and application software.
The major specification of the usable disc
format is:
Maximum directory steps: 8
•
Usable characters for a file/folder
•
name: A - Z, 0 - 9, _ (underscore)
Maximum number of characters for
•
a file name: 64 and a 3-character
extension code
NOTES
When naming, be sure to add the file
•
extension “mp3” or “wma” to the file
name.
If you put the extension “mp3” to a file
•
other than an MP3 file, the player
cannot recognize the file properly.
NOTE: For best results and for the best
reading ability, try to make your
MP3 recordings at lower speeds.
The most accurate speed that we
tested for playability is 4X.
The file name does not correspond
•
to the ID tag.
THE USABLE NUMBER OF
FOLDERS/FILES
NOTE: If you use the new windows
media player, you may need to
download an “MP3 plug in” to be
able to record in MP3 format.
Maximum number of folders: 511
•
Maximum number of files: 511
•
14
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
15
3/22/2005, 5:52 PM
LISTENING TO THE RADIO
FM antenna
FUNCTION
switch
BAND
switch
LCD display
TUNING
control
Connect the supplied AC power cord or batteries (refer to page 4).
1
2
Slide the FUNCTION switch to the
FUNCTION
OFF
RADIO
CD/MP3
RADIO position, the LCD display
will turn on, and the current tuner
station will show in the display.
BAND
FM FM STEREO
AM
Slide the BAND switch to the
proper band position (AM, FM, or
FM STEREO) that you want.
3
TUNING
Tune into the station you prefer
using the TUNING control. Adjust
for the clearest sound. The
display will show you the
frequency of the station tuned in.
This is useful when you know the
station’s frequency.
NOTE:
This set uses an analog (rotary) tuner with a digital display. The digital
display is very useful when locating your favorite station and also as-
sists you to pinpoint the exact tuning frequency. This set does not have
radio memory presets.
15
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
16
3/22/2005, 5:52 PM
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
PHONES
jack
FUNCTION VOLUME
switch control
TIP
If the FM broadcast is
•
To
Slide or Adjust
noisy, slide the BAND
switch from FM Stereo
to FM.
Adjust the volume
VOLUME control
Slide the FUNCTION
switch to OFF position
Turn off the Radio
Next time you want to
listen to the radio, just
slide the FUNCTION
switch to the RADIO
position. The player
will automatically start
playing the previously
tuned station. You can
verify this by seeing the
frequency in the display.
•
Insert your headphones
plug into the PHONES
To enjoy the music
without
others
disturbing
jack
(HEADPHONES
ARE NOT INCLUDED)
To improve broadcast reception
Change the position of the antenna for FM or FM
Stereo. Move the set itself for AM.
NOTE: Extend the FM antenna fully before bending
or rotating.
First extend the
FM antenna fully.
Then you may
bend it or rotate it.
Rotate the set
itself for better AM
reception.
16
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
17
3/22/2005, 5:52 PM
PRECAUTIONS
On Safety
On Power Sources
Do not open the cabinet. As the laser
For battery operation, use 8 size “C”
•
•
beam used in the DISC player section
may be harmful to the eyes, do not
attempt to disassemble the cabinet.
Refer servicing to qualified personnel
only.
batteries. We recommend alkaline
batteries for longer life.
When the batteries will not be used for a
•
few weeks or more, remove them to
avoid damage that can be caused by
battery leakage or corrosion.
Should any solid object or liquid fall
•
into the player, unplug the player, and
have it checked by qualified personnel
before operating it any further.
On Operation
If the player is brought directly from a
•
cold to a warm location, or is placed
in a very damp room, moisture may
condense on the lens inside the DISC
player section. Should this occur, the
player will not operate properly. In
this case, remove the DISC and wait
about an hour for the moisture to
evaporate.
On Placement
Do not leave the player in a location near
•
a heat source, or in a place subject to
direct sunlight, excessive dust or
mechanical shock.
Do not place the player on an inclined or
unstable place.
•
Do not place anything within 1 inch of
This player has an anti-skip feature,
•
•
the back of the cabinet. The ventilation
holes must not be covered for the player
to operate properly and prolong the life
of its components.
small bumps will not stop the music.
However this set must play a few
minutes for the anti-skip feature to
become active.
If the player is left in a car parked in the
•
sun, be sure to choose a location in the
car where the player will not be
subjected to the direct rays of the sun.
Since a strong magnet is used for the
•
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the player to prevent
possible damage from the magnets.
17
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
18
3/22/2005, 5:52 PM
MAINTENANCE
Cleaning the lens
Handling Discs
cause skipping or noise.
A dirty lens will cause sound skipping. If
the lens is very dirty, the player may not
work. We suggest using a special cleaning
disk (not included) available in most music
and Hi-Fi stores. However, if you do not
have one, you may use a cotton swab very
slightly dampened with alcohol to clean the
lens.
Dirty, scratched or warped discs may
•
Handle the disc only by the edges. To
keep clean, do not touch its surface.
•
Discs should be stored in their cases
after use to avoid scratches.
•
Do not expose discs to direct sunlight,
•
high humidity, high temperatures, or
dust, etc. Prolonged exposure to
extreme temperatures can warp the
disc (such as leaving the discs in
your car during summer time).
Cleaning the cabinet
Wipe with a soft cloth. If the cabinet is
very dirty, dampen (not dripping wet) the
cloth with a weak solution of soapy water,
and then wipe clean.
Do not stick or write anything on the
•
music side of disc. Sharp writing
instruments, or the inks used in some
felt-tip pens, may damage its surface.
Cleaning the Discs
Fingerprints should be carefully wiped
•
To remove the Disc
from the surface of disc with a soft
cloth. Unlike conventional records,
compact discs have no grooves to
collect dust and microscopic dirt, so
gently wiping them with a soft cloth
should remove most particles. Wipe in
a straight motion from the center to
the edge.
Open the CD DOOR by lifting the CD
DOOR, hold the disc by the edge while
slightly pressing on the center spindle,
then lift it from the edge to release and
remove.
NOTE
Always press the STOP button and wait
for the disc to stop rotating before
opening the CD DOOR to remove the
disc.
Never use thinner, benzine, record
•
cleaner or antistatic spray on a compact
disc. Such chemicals can damage its
plastic surface.
18
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
19
3/22/2005, 5:52 PM
TROUBLE SHOOTING
Problem
Remedy
Insert the AC plug into a wall outlet securely.
Make sure the batteries are installed correctly
and they are fresh.
•
The power is not on.
•
Make sure the FUNCTION switch is at the
right position as you want.
•
Adjust the volume.
There is no sound.
•
Unplug the headphones when listening
through speakers.
•
Insert a CD or an MP3 disc with the label
side up.
•
•
“ NO DISC ” or “ BAD DISC ”
appears in the display even
Sometimes downloaded songs can only play
when a disc is in place.
on the computer which downloaded the songs.
Make sure that the CD compartment is closed.
Clean the disc.
•
•
•
Take out the disc and leave the CD DOOR
open for about an hour to dry moisture
condensation.
Discs do not play.
Make sure the FUNCTION switch is at the
CD/MP3 position.
Replace disc (this set will not play damaged
or scratched discs), or buy a disc repair
polisher to repair it yourself.
•
•
Clean the discs, or replace them if the discs
are badly damaged.
Place the player in a location with less
vibration.
•
•
The sound drops out.
Check if the batteries are fresh.
Your MP3 disc may not be supported on this
player. This player will play most standard
MP3 discs.
•
•
CD/MP3 does not play while the
radio may continue to play.
It is normal since the radio uses less power
than the CD/MP3 player.
•
Re-burn a new MP3 disc. Make sure the disc
was recorded in MP3 or WMA format.
Some MP3 songs can not be copied onto discs.
This is the new DRM digital rights management
to prevent unlimited copies.
•
MP3 playback does not work
or stops.
•
Replace all the batteries with new ones if
they are weak.
Bring the set near a window, or rotate the
set for better AM reception; or draw out
the FM antenna for better FM reception.
•
•
The sound is weak or has
poor quality.
19
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
20
3/22/2005, 5:52 PM
SPECIFICATION
General Description
Power source:
AC 120V, 60Hz
DC 12V (8 size “C” batteries, not included)
(Alkaline batteries are recommended)
2
-
3 1/2” 8 ohm
Speakers:
Output power:
Dimensions:
1.8W/channel
Width: 15 1/2”
Depth: 10 3/8”
Height: 6 1/2”
Weight: 5.6 LBs (without batteries)
CD/MP3 Section
Frequency response:
Laser wavelength:
Error correction method:
Pickup:
50Hz - 15kHz +1/-2dB
760 - 800 NM
CIRC
Optical 3-beam semiconductor laser
(780 nm wavelength)
NOTE: CD-Rs or CD-RWs playback capability at this CD/MP3 player may vary depending
on quality of media, CD-Burner, speed of burning and application software. Also
digital rights management may prevent copying some songs to discs, read the
information on the web sites for more information.
Radio Section
Frequency range:
FM: 88 - 108 MHz
AM: 530 - 1700 kHz
LENOXX reserves the right to make design and specification changes for product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET
WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.
LIMITED WARRANTY
We warrant this product to be free from defects in material and workmanship under normal use for a
period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should it
become defective under this warranty, providing you submit proof of purchase (sales slip) with the set.
During the initial 90 day period after original purchase, we will service or exchange, at no charge, the
set that is returned to LENOXX ELECTRONICS CORP. After the initial 90 day period expires, and for a
period of 12 months from original purchase, we will repair the unit covering any part(s) that need to be
replaced at no charge, but will charge for the cost of labor, return postage paid by Lenoxx.
This warranty does not apply to any products which have been subject to misuse, neglect or
accident. This warranty does not cover broken cord or cabinet. UNDER NO CIRCUMSTANCES
WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. The following charges apply to repairs beyond the warranty period: $15.00. Be sure to
pack carefully and return postage paid insured together with your money order (personal checks will not
be accepted) and sales receipt to:
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET N.J. 07008
For Customer Service
Dial 1-800-315-5885
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
or Visit Our Website: http://www.lenoxx.com
© 2005 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
20
IB-CD2086(AD)-WM-E-031705
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CD2086-WM-E-012005(WMA).pmd
21
3/22/2005, 5:52 PM
|