Lenoxx Electronics CD Player CD 108 User Manual

®
COMPACT DISC PLAYER  
AM/FM STEREO CASSETTE RECORDER  
MODEL CD-108  
OPERATING INSTRUCTIONS  
PLAYS ALL MUSIC COMPACT DISCS  
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT  
RECEIVES AM/FM STEREO BROADCASTS  
RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE  
FM STEREO AND POWER INDICATORS  
2 WAY POWER - AC/DC  
BASS BOOST SWITCH  
REQUIRES 8 SIZE “C” BATTERIES  
PLEASE READ CAREFULLY BEFORE USE  
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
14. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids  
are not spilled into the enclosure through openings.  
15. Damage Requiring Service - The appliance should be serviced by qualified service  
personnel when:  
A. The power supply cord or the plug has been damaged; or  
B. Objects have fallen, or liquid has been spilled into the appliance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or exhibits a marked change in  
performance; or  
E. The appliance has been dropped, or the enclosure damaged.  
16. Servicing - The user should not attempt to service the appliance beyond that described  
in the operating instructions. All other servicing should be referred to qualified service  
personnel.  
17. Power lines - An outdoor antenna should be located away from power lines.  
18. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be  
sure the antenna system is grounded so as to provide some protection against voltage  
surges and built up static charges. Section 810 of the National Electrical Code, ANSI/  
NFPA 70 provides information with respect to proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding  
conductors, location of antenna-discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode. See Figure.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NEC - NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN WIRE  
GROUND  
CLAMP  
ANTENNA DISCHARGE UNIT (NEC  
SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
It is the intent of Lenoxx that this product be used in full compliance with the copyright  
laws of the United States and that prior permission be obtained from copyright owners  
whenever copying tapes or CD’s.  
Do not apply oil or petroleum products or solvents to any part of this set.  
CAUTION  
Use of controls or adjustments or performance of procedures other than those  
specified herein may result in hazardous radiation exposure.  
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated on  
the back of the set.  
2
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BATTERY SAFETY INSTRUCTIONS  
CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE  
TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS.  
1. Use only the type and size of batteries mentioned in the operating instructions  
booklet (batteries are not included with this set, please buy the proper batteries).  
2. Do not dispose the batteries into a fire. The cells may explode. Check with local  
codes for possible special disposal instructions.  
3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may  
cause damage to the eyes or skin. It may be toxic if swallowed.  
4. Be careful when handling batteries in order not to short the battery with conducting  
materials such as rings, bracelets and keys. The battery or conductor may over  
heat and cause burns.  
5. Do not attempt to recharge non-rechargeable batteries. The batteries may leak  
corrosive electrolyte or explode.  
6. Do not attempt to rejuvenate the batteries identified for use with this product by  
heating them. Sudden release of the battery electrolyte may cause burns or  
irritation to eyes or skin.  
7. All batteries should be replaced at the same time. Mixing fresh and discharged  
batteries could increase internal cell pressure and rupture the batteries.  
8. When inserting batteries into this product, the proper polarity (  
and  
) or  
direction must be observed. Reverse insertion of some or all of the batteries may  
result in battery eletrolyte leakage or explosion.  
9. Remove the batteries from this product if the product will not be used for a long  
period of time (several months or more) since during the period the batteries could  
leak, damaging the product.  
10. Discard weak or dead batteries as soon as possible since they are more likely to  
leak in the product. Batteries should be replaced (depending on the product) when  
the display gets dim or if the Low Battery Indicator shows or if the sound gets  
distorted.  
11. Do not store this product in high temperature areas. Batteries that are stored in a  
freezer or refrigerator for the purpose of extending shelf life should be protected  
from condensation during storage and defrosting. Batteries should be stabilized at  
room temperature prior to use after cold storage.  
12. If this product does not operate normally, see TROUBLE SHOOTING on page 18. If  
you can’t resolve the problem, or if the product is damaged, refer to the LENOXX  
WARRANTY INFORMATION. Opening or removing covers may expose you to  
dangerous voltages or other risks. Incorrect reassembly can cause electric shock  
when the appliance is subsequently used.  
13. If liquid leaks from the batteries, carefully wipe this liquid. Do not allow it to touch  
your skin, and discard the leaking batteries.  
14. Do not mix batteries (OLD and NEW or CARBON and ALKALINE, etc.).  
15. The use of rechargeable batteries is not recommended for this set because their  
voltage and life is lower than standard batteries.  
16. Installation of batteries should be done by an adult only.  
SAVE THESE INSTRUCTIONS  
3
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a CD  
4
1
2
3
Connect the supplied AC power cord or batteries(see page 14).  
Slide the Function Switch to CD  
position (power on).  
1
2
RADIO  
CD  
TAPE  
Press the CD Door Open  
button to open the CD Door  
and place the CD in the CD  
compartment.  
CD OPEN  
The label side of the CD  
should face you.  
Close the CD door by pushing it  
back.  
3
4
Press the CD Play  
Button. The player plays  
all the tracks once.  
Track  
number  
Play/Pause  
Lamp  
4
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use these buttons for additional operations  
Volume Control  
Function  
Switch  
CD Open  
Button  
Tip  
When CD play is  
To  
Press or Adjust  
paused, the Play/  
Pause Lamp will  
flash and no music  
will play.  
Adjust the volume  
Stop playback  
Volume Control  
To resume play,  
press the Pause  
Button again, the  
Play/Pause Lamp  
will stop flashing  
and music will play.  
Pause playback  
The Lamp will flash during  
pause. Press again to  
resume play after pause.  
Go to the next track  
Go back to the previous  
track  
Play/Pause Lamp  
or  
while playing,  
Locate a point in a song  
press and hold down until  
you find the point.  
CD door Open Button  
(press Stop first)  
Remove the CD  
Slide the Function Switch  
to TAPE position  
Turn off the power  
5
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing CD tracks repeatedly (Repeat Play)  
You can play CD tracks repeatedly in normal or program play modes (see page 7).  
Function Switch  
Repeat Button  
Repeat Lamp  
Program Lamp  
1. Slide the Function Switch to CD position.  
2. Press the CD Repeat Button.  
To repeat  
Press  
Repeat Lamp  
a single track (song)  
all the tracks (songs)  
Press the Repeat Button once  
Press the Repeat Button twice  
Flashing  
Steady on  
programmed tracks  
Press the Program Button, and  
then the Repeat Button twice  
Steady on  
(the Program  
Lamp flashing)  
3. Select the track by pressing  
or  
, and then press  
.
To cancel Repeat Play  
Press the Repeat Button until the Repeat Lamp is off.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-108072799 v.1 E  
Creating your own music  
program (Program Play)  
Program  
You can make a program of up to 19  
tracks in the order you want them to be  
played.  
Program Lamp  
1. Slide the Function Switch to CD position.  
2. Press the Program Button. The number “ ” and the  
Program Lamp will flash.  
3. Press  
or  
to select the tracks you want to  
program in the order you want.  
4. Press the Program Button to confirm. The number “ ”  
and the Program Lamp will flash.  
5. Repeat steps 3 and 4. You can program up to 19  
tracks.  
6. Press  
to start program play. The Program Lamp will  
remain flashing.  
To change the current program  
Just creat a new program following the Programing procedure.  
To cancel Program Play  
Press the Stop Button and the Program Lamp goes off.  
7
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to the radio  
2
3
4
1
Connect the supplied AC power cord or batteries (see page 14).  
Slide the Function Switch to  
RADIO position (power on).  
1
2
CD  
RADIO  
TAPE  
Slide the Band Switch to the proper  
band position that you want.  
FM  
AM  
FM ST.  
BAND  
3
4
Tune into the station you prefer  
using the Tuning Control. Adjust  
for the clearest sound.  
This indicator will light up when  
receiving FM Stereo broadcasts.  
FM STEREO  
8
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use these buttons for additional operations  
Volume Control  
Function Switch  
Tip  
To  
Slide or Adjust  
If the FM broadcast is  
Adjust the volume  
Volume Control  
noisy, slide the Band  
Switch from FM Stereo  
to FM position.  
Slide the Function Switch  
to TAPE position  
Turn off the Radio  
To improve broadcast reception  
Reorient the antenna for FM or FM Stereo. Reorient  
the player itself for AM.  
9
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a tape  
3
2
Connect the supplied AC power cord or batteries(see page 14).  
Slide the Function Switch to  
TAPE position.  
1
CD  
RADIO  
TAPE  
Press the Stop/Eject  
Button to open the tape  
2
compartment  
and  
insert a recorded tape.  
Close the door.  
STOP/EJECT  
Full reel on  
the left side.  
Press the Play Button.  
The player truns on and starts  
playing.  
3
PLAY  
10  
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use these buttons for additional operations  
VOLUME CONTROL  
PHONES  
JACK  
BASS BOOST  
SWITCH  
PAUSE  
STOP/EJECT  
PLAY  
FAST F.&  
REWIND  
To  
Press or Adjust  
Volume Control  
Tip  
Adjust the volume  
Stop playback  
When the tape finishes  
playing that side of the  
tape, the set will stop. To  
hear the otherside, flip  
tape over, then insert  
and press Play.  
Stop/Eject Button  
Fast forward or rewind the  
tape  
Fast Forward Button or  
Rewind Button  
Pause playback  
Pause Button  
Press again to resume  
play after pause.  
Eject the cassette  
Stop/Eject Button  
Bass Boost Switch  
Get different sound effect  
To enjoy the music without  
distrubing others  
Insert your headphone  
plug into the Headphone  
Jack (marked PHONES)  
11  
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording on a tape  
2
3
1
Connect the supplied AC power cord or batteries (see page 14).  
1
2
Press the Stop/Eject Button to  
open the tape compartment  
and insert a blank tape. Select  
the program source (AM, FM,  
CD, or, built-in microphone)  
you want to record.  
STOP/EJECT  
To record from the CD player,  
insert a CD and follow the steps to  
play a CD (see page 4).  
To record from a radio, slide the  
Function Switch to RADIO, and  
tune into the station you want (see  
page 8).  
CD  
RADIO  
TAPE  
To record from the buit-in  
microphone, leave the Function  
Switch at TAPE position, and  
speak in front of the set.  
Press the Record Button to start  
recording. (The Play Button is  
depressed automatically.)  
3
RECORD  
12  
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use these buttons for additional operations  
Tip  
FUNCTION  
SWITCH  
STOP/EJECT PAUSE  
Adjusting the Volume or  
Bass Boost Switch will  
not affect the recording  
level.  
For best recording  
effect, use the AC  
power instead of  
batteries.  
To  
Press or Adjust  
Stop recording  
Stop/Eject Button  
Pause recording  
Pause Button  
Press the button again to  
resume recording.  
To erase a recording,  
just start a new  
recording, and the old  
one is automatically  
replaced.  
Turn off the power  
Press the Stop/Eject  
Button and slide the  
Function Switch to TAPE  
position.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-108072799 v.1 E  
Choosing the power sources  
You can use the AC power or batteries as a power source.  
Tip  
1. Connecting the AC power  
If the plug of the AC power  
cord does not match your  
outlet, do not force it.  
Reverse it and try again. This  
plug is polarized and only fits  
one way into the wall outlet  
and back of the set.  
cord  
Insert one end of the supplied AC power cord to  
the socket located at the rear of the player, and  
the other end to the wall outlet.  
2. Using the player on batteries  
Insert 8 size “C” batteries (not supplied) into the  
battery compartment.  
Tip  
Replace the batteries when  
the Power/Battery Lamp dims  
or when the player stops  
operating. Replace all the  
batteries with new ones.  
Before you replace the  
batteries, be sure to take out  
the CD from the player and  
remember to check the  
Battery Safety Instructions on  
Page 3.  
To use the player on batteries, disconnect the AC  
power cord from the player.  
8
S IZ  
E
“C ” B A T T E R IE S  
U P P E R  
LO E R  
W
B AT T E R Y D O  
O
R
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-108072799 v.1 E  
Precautions  
On safety  
On power sources  
As the laser beam used in the CD  
For battery operation, use 8 size C  
player section is harmful to the eyes,  
do not attempt to disassemble the  
casing. Refer servicing to qualified  
personnel only.  
batteries. We recommend alkaline  
batteries for longer life.  
When the batteries are not to be used,  
remove them to avoid damage that can  
be caused by battery leakage or  
corrosion.  
Should any solid object or liquid fall into  
the player, unplug the player, and have  
it checked by qualified personnel  
before operating it any further.  
The nameplate indicating operating  
voltage, power consumption, etc. is  
located at the back of the set.  
On placement  
On operation  
Do not leave the player in a location  
If the player is brought directly from a  
near heat source, or in a place subject  
to direct sunlight, excessive dust or  
mechanical shock.  
cold to a warm location, or is placed in  
a very damp room, moisture may  
condense on the lens inside the CD  
player section. Should this occur, the  
player will not operate properly. In this  
case, remove the CD and wait about  
an hour for the moisture to evaporate.  
If the player has not been used for a  
long time, set it in the playback mode  
to warm it up for a few minutes before  
insert a cassette.  
Do not place the player on an inclined  
or unstable place.  
Do not place anything within 1 inch of  
the back of the cabinet. The ventilation  
holes must be unobstructed for the  
player to operate properly and prolong  
the life of its components.  
If the player is left in a car parked in  
This CD player is designed to be played  
the sun, be sure to choose a location  
in the car where the player will not be  
subjected to the direct rays of the sun.  
on a stable no vibration position. If you  
bump the set during CD play, the music  
will stop or skip for a few seconds. This  
is normal for this type of player.  
Since a strong magnet is used for the  
speakers, keep personal credit cards  
using magnetic coding or spring-  
wound watches away from the player  
to prevent possible damage from the  
magnet.  
If you have any questions or problems  
concerning your player, please contact  
our Customer Service Department at  
1-800-315-5885 (MONDAY - FRIDAY  
09:00 - 17:00 EST).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-108072799 v.1 E  
Precautions (continued)  
Notes on CDs  
Notes on cassettes  
Before playing, clean the CD with a  
cleaning cloth. Wipe the CD from the  
center out.  
Break off the cassette tab from side A  
or B to prevent accidental recording. If  
you want to reuse the tape for  
recording, cover the broken tab with  
adhesive tape.  
Side A  
Tab for side A  
Tab for side B  
Do not use solvents such as benzene,  
thinner, commercially available  
cleaners or anti-static spray intended  
for vinyl LPs.  
To record on a tape with its tab broken  
off, cover the respective tab hole for  
side A or B with adhesive tape.  
Do not expose the CD to direct  
sunlight or heat sources such as hot  
air ducts, nor leave it in a car parked  
in direct sunlight as there can be a  
considerable rise in temperature inside  
the car.  
Do not stick paper or sticker on the  
CD, nor scratch the surface of the CD.  
The use of a cassette with more than  
90 minutes of play time is not  
recommended except for long  
continuous recording or playback.  
To reduce the chances of tape jamming  
or tangling, you should check that  
there are no loose layers of tape visible  
through the cassette center window  
if any, tighten these loose layers of  
tape using a pencil before inserting the  
cassette into the set.  
After playing, store the CD in its case.  
If there is a scratch, dirt or fingerprints  
on the CD, it may cause tracking error.  
16  
CD-108072799 v.1 E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Cleaning the lens  
Notes for storing cassette  
tapes  
If the lens becomes dirty, it may cause a  
skipping of sound during CD operation.  
Clean with a commercially available lens  
cleaner blower.  
1. Do not put a tape near a magnetic field,  
such as a TV, or speaker. Magnetic  
fields may reduce the tape sensitivity  
or even erase the recording.  
2. Do not store tape for any length of time  
in a hot, moist or dusty place.  
Cleaning the tape heads  
and tape path  
Cleaning the cabinet  
Wipe the heads, the pinch roller and the  
capstan with a cleaning swab slightly  
moistened with cleaning fluid or alcohol  
after every 10 hours of operation for  
optimum playback and recording quality.  
Clean the cabinet, panel and controls with  
a soft cloth slightly moistened with a mild  
detergent solution. Do not use any type  
of abrasive pad, scouring powder, or  
solvent, such as alcohol or benzene.  
RECORD / PLAY BACK HEAD  
PINCH ROLLER  
ERASE HEAD  
CAPSTAN  
COTTON SWAB  
After cleaning, insert a tape when the  
areas cleaned are completely dry.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-108072799 v.1 E  
Troubleshooting  
Problem  
Remedy  
Connect the AC power cord to a wall  
outlet securely.  
The power is not on.  
Make sure the batteries are inserted  
correctly and they are fresh.  
Make sure the Function Switch is at the  
right position as you want.  
There is no sound.  
Adjust the volume.  
Unplug the headphones when listening  
through speakers.  
” appears in the display  
Insert the CD with the label side facing you.  
even when a CD is in place.  
Make sure that the CD compartment is  
closed.  
CD does not play.  
Place the CD with the label side facing you.  
Clean the CD.  
Take out the CD and leave the CD door  
open for about an hour to dry moisture  
condensation.  
Make sure the Function Switch is at CD  
position.  
Clean the CD, or replace it if the CD is  
badly damaged.  
The sound drops out.  
Place the player in a location free from  
vibration.  
Check if your batteries are fresh.  
Replace all the batteries with new ones if  
they are weak, or bring the set near a  
window, or rotate the set.  
The sound is weak or has poor  
quality.  
The Record Button does not  
function / The tape does not  
play.  
Make sure the safety tab on the cassette  
is in place.  
Make sure the Function Switch is at TAPE  
position.  
Clean the erasing head (see page 17).  
Replace all the batteries with new ones if  
they are weak.  
The tape does not erase  
completely.  
Make sure the tape is inserted properly.  
Make sure the safety tab of the cassette  
is in place.  
The tape does not record.  
The sound is weak / The sound  
quality is poor.  
Clean the heads, pinch roller and capstan  
(see page 17).  
The tape has reached its end. Remove it,  
flip to the other side and re-insert.  
Cassette Play Button pops up.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-108072799 v.1 E  
Specification  
GENERAL DESCRIPTION  
Power source:  
AC 120V, 60Hz 12Watts  
DC 12V (8 size “C” batteries)  
(we recommend alkaline batteries for longer life)  
Speakers:  
48 ohm  
Output power:  
Dimensions:  
2W / channel  
1
Width: 16 / ”  
4
1
3
Depth: 8 / ”  
4
Height: 5 / ”  
4
Weight: 7LBs (without batteries)  
CD SECTION  
Plays disc type:  
Any normal CD used in portable players  
760 - 800 NM  
Laser wavelength:  
Tracking method:  
3 - spot error detection  
3.86 mm lens  
Frequency response: 40 Hz - 18 KHz  
TAPE RECORDER SECTION  
Tape:  
Standard normal bias cassette tape  
Frequency response: 100 Hz - 10 KHz  
RADIO SECTION  
Frequency range:  
FM: 88 - 108 MHz  
AM: 530 - 1700 KHz  
LENOXX reserves the right to make design and specification changes for product  
improvement.  
PROTECT YOUR FINE FURNITURE!  
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER  
THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.  
© 1999 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-108072799 v.1 E  

KTI Networks Network Card KG 502T User Manual
Lathem Time Clock 6000E User Manual
Lennox Hearth Stove 290M User Manual
Lenovo Server 6522 User Manual
LG Electronics Cell Phone C1300I User Manual
LG Electronics Computer Monitor W2753VC User Manual
Life Fitness Treadmill TR 4500HR User Manual
Lincoln Electric Welder 11079 User Manual
Melissa Toaster 243 053 User Manual
Memorex Headphones MI2001FM User Manual