px4-300r Network Storage
Array
with LifeLine 4.0
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Setup Overview
Setup with your px4-300r Network Storage Array is easy. Remove it from the box, connect it to your
network switch or hub, and then power it up. Launch a web browser and enter the setup URL identified in
the Quick Start Guide. LenovoEMC Setup launches and displays a message that your px4-300r is online
and ready to use.
You then can install client software that includes:
●
●
LenovoEMC Storage Manager
Twonky Media Server for media aggregation
LenovoEMC Storage Manager is a management tool that helps you discover your px4-300r on your
network to simplify access to content on your px4-300r from your computer. It also allows you to add your
computer as a trusted device to a LenovoEMC Personal Cloud. Refer to LenovoEMC Storage Manager
online help for additional information. Twonky Media Server consolidates all media files on devices on your
network and presents them in a unified view.
From LenovoEMC Setup, you can optionally create a Personal Cloud or begin using your px4-300r by
clicking Manage My Device.
By default, the px4-300r will attempt to acquire an IP address from DHCP, If there is not a DHCP
server available on the network, the px4-300r will use an IP address in the self-assigned APIPA
range (169.254.x.x).
2
Setup Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Set up my px4-300r Network Storage Array if it's not
discovered
If your px4-300r is not discovered when you enter the URL identified in your Quick Start Guide, you have
two ways of discovering it.
Discovering with LenovoEMC Storage Manager
300r on your network.
Discovering the px4-300r without the Internet
You can access your px4-300r device without internet access as described by these methods for
Windows PCs or Macs:
●
Windows 7 and Vista — Click Start, Computer, Network. You should see your px4-300r listed
under Other Devices. You can then double-click the device icon to access the px4-300r
Management Console.
●
Windows XP — If you have not enabled UPnP Discovery, click Start, Help and Support. In the
Help and Support browser, search for UPnP and follow the steps from “Install the UPnP
framework”. After UPnP is enabled, open Windows Explorer and in the Folders view, expand My
Network Places. You should see your px4-300r listed. You can then double-click the device icon
to access the px4-300r Management Console.
●
Mac — Browse to your px4-300r through Finder, Shared, All and use Go, Connect to Server to
connect to Shares on your px4-300r.
Set up my px4-300r Network Storage Array if it's not discovered
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Setup Page
The Setup page opens when you first access the px4-300r Network Storage Array from the Home Page or
the LenovoEMC Storage Manager. On this page, you can configure some basic device features by clicking
the appropriate link. The current setting of the feature displays above the link. You can also configure all
features shown on the Setup page by accessing the specific features directly.
4
Setup Page
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Network Connection
Connecting the px4-300r Network Storage Array to Your Network
First, check the package contents.
Verify that the box contains the following items:
1. px4-300r (models may vary)
2. Power Cables
3. Quick Start Guide
4. Ethernet Cable
5. Rail Kit (models may vary)
Package contents may vary.
Network Connection
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Connecting the px4-300r
Initial Setup
If you have purchased more than one px4-300r, complete all steps on one device before setting up
additional devices.
6. Make sure at least one hard drive is installed in the px4-300r.
7. Use the included network cable to connect the px4-300r to your network hub or switch.
8. Connect the included power cord to the back of the px4-300r and to an Uninterruptible Power
Supply (UPS).
9. Power on the px4-300r.
10. From a computer on your network, open a web browser and go to http://setup.lenovoemc.com to
set up your px4-300r on your network. For best results, use a computer that is connected to the
same subnet or network segment as the px4-300r.
You can access the px4-300r Management Console directly by entering the IP address or model
name of your px4-300r in your computer’s web browser. To use the model name on a Mac, add
.local after the name in the browser (for example, px4-300r.local).
11. OPTIONAL: if desired, install the LenovoEMC Storage Manager and Media Aggregation software.
If you install LenovoEMC Storage Manager, its icon will appear in the System Tray (Windows) or
Menu Bar (Mac). The LenovoEMC Storage Manager will automatically scan your network and
connect to available Shares.
If you receive a message from your operating system's firewall alerting you of network activity, be
sure to unblock communications.
Mac Users: Shares on the px4-300r will mount and appear on the Mac Desktop.
PC Users: Shares on the px4-300r will automatically be assigned a drive letter and will be
available in the Network Drives section under My Computer.
Network Settings
The Network page of your px4-300r is where you make changes to set up network connectivity. The
Network page displays your current network settings and enables those settings to be modified. On this
page, you can identify your DNS servers and WINS servers and how your system's IP address is
determined. Most system IP addresses and other network settings can normally be configured
automatically.
Manually Configuring Your Network
If you are comfortable with network technology and want to configure the network, refer to Manually
Bonded NICs
If your px4-300r has multiple network interface cards (NICs), you can bond those NICs. Refer to Bonding
NICs.
6
Network Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Enabling Jumbo Frames for Each NIC
You can enable jumbo frames for each NIC in your px4-300r by expanding the Information section for a
NIC and entering a jumbo frame size in the Jumbo Frame field. If you do not want jumbo frame support,
leave the field blank. Jumbo frame support is useful for transferring large files, such as multimedia files,
over a network. Jumbo frame support increases transfer speed by placing large files in fewer data packets.
It also reduces the demand on the device hardware by having the CPU process more data in fewer data
packets.
Jumbo frame support should only be enabled if you are sure your network is jumbo-frame compatible and
all network devices have been configured to support jumbo frames. It is recommended that you confirm all
network interface cards (NICs) are configured to support jumbo frames before enabling this feature.
VLAN
Each NIC in your px4-300r can be added to up to four Virtual LANs (VLAN). For more information on adding
Manually Configuring Network Settings
There are various settings in the network setup that you can manually configure.
1. Click
Modify network settings.
2. Uncheck Automatically configure DNS, WINS, and all IP addresses (DHCP).
3. DNS Servers — enter the IP addresses of the DNS (Domain Name System) servers. DNS is
used for translating the domain name to IP addresses.
4. WINS Servers — enter the IP addresses of the WINS server.
5. From the Bonding Mode drop-down menu, choose one of the following:
●
●
●
Transmission Load Balance — increases bandwidth by distributing the load across multiple
NICs.
Link Aggregation — increases bandwidth by distributing the load across multiple ports in a
switch. Link Aggregation requires an 802.3ad compatible switch.
Failover — provides recovery from a failure, so if one NIC should fail, your system still has
network connectivity with the other NIC.
6. To connect your px4-300r to a proxy server, check Use proxy settings and enter proxy IP
address, port number, and the proxy username and password.
7. Click Apply to save your settings.
8. If a DHCP server is unavailable for a network interface card (NIC), the device could auto-assign
an IP address, or you can uncheck the Automatically acquire network address (DHCP)
checkbox found in the Information section of a NIC.
9. You can change the following settings in the Information section:
●
IP Address — the static IP address of the px4-300r. Use an available IP address in the range
used by the LAN.
●
●
Subnet Mask — the subnet that the IP address belongs to. The default value is 255.255.255.0.
Gateway — enter the gateway IP address in this field.
10. Click Apply to save your settings.
Network Connection
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
NICs.
Bonding NICs
Bonding network interface cards (NICs) is a way to provide redundancy for your px4-300r on the network.
If one NIC should fail, your px4-300r will remain accessible on the network if that NIC is bonded to others.
Depending on the bonding mode selected, it can also increase bandwidth. See Manually Configuring
Network Settings for information on bonding mode options and how to change the bonding mode.
You can bond two or more network interface cards (NICs) in your px4-300r by selecting the NICs and
clicking Apply.
Use the following procedure to bond NICs.
1. On the Network page, expand the NIC number and then expand the Bond Network Interface
section.
2. Check the checkboxes next to the NICs that you want to bond to the selected NIC. For example, if
you selected NIC 1, and your configuration includes four NICs, you could bond NIC 1 to NIC 2, 3,
and/or 4.
3. Click Apply to save your settings.
4. The section updates and displays the NICs that are bonded to the selected NIC.
Unbonding NICs
1. To unbond a NIC, uncheck the box next to the bonded NIC.
2. Click Apply to save your settings.
VLAN Settings
A VLAN (Virtual Local Area Network) is a network of devices that are joined into one broadcast domain,
even if the devices are not physically connected to each other. VLANs are useful for creating smaller
networks within a larger LAN; for example, a legal department in a company might be on its own VLAN
because it has sensitive documents that only certain personnel should have access to. The smaller
networks that VLANs create do not require any additional physical resources, such as additional cabling.
Your px4-300r Network Storage Array can be configured to support VLANs by connecting the
corresponding physical NIC to the trunk port of an L2/L3 switch.
VLAN is configured for each NIC, but it is not supported on bonded NICs. If a NIC is bonded, you must
unbind it first to configure it for a VLAN.
Adding a VLAN
1. To add a VLAN, expand the VLAN Settings section of a NIC.
2. Click
Add VLAN.
3. Enter a VLAN ID value between 2 and 4094. You can enter up to 4 VLAN IDs for each NIC. A
VLAN can obtain its network settings from DHCP, or you can uncheck DHCP and enter the IP
address, subnet mask, and gateway manually.
Network Connection
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
5. Click Apply to save your changes.
Deleting a VLAN
In the VLAN Settings section click Delete to delete the VLAN.
Network Connection
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Naming Your px4-300r Network Storage Array
You can provide a meaningful name for your px4-300r using the Device Identification page. This page in
the px4-300r Management Console enables you to change the Storage Device Name, the Storage Device
Descriptive Name, and the Workgroup Name.
Change any of these by editing the text fields. Click Apply to save your changes.
●
Device Name: Enter a name for the px4-300r device. Use a name that will help you identify it on
your network.
●
Device Descriptive Name: Enter a descriptive name for the px4-300r device. This name can
provide additional detail that identifies the device. If you leave this field blank, the default device
name is used.
●
Workgroup Name: Enter a workgroup name for the px4-300r device if you need to change the
default name. The workgroup name identifies a group of computers that share information with
each other. Change the workgroup name only if you explicitly define a workgroup on your network.
Most users won't need to change the workgroup name, unless they have explicitly defined a
different workgroup on their other computers.
Renaming the px4-300r will require a device restart.
Setting up Active Directory
If your px4-300r supports Active Directory, you configure AD on the Device Identification page. Refer to
10
Naming Your px4-300r Network Storage Array
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Configuring Your px4-300r Network Storage Array to Use
Active Directory
If you have an existing Active Directory user organization, you can incorporate it into the px4-300r
Management Console. Your px4-300r can work in a high availability environment, which means it can work
with multiple AD servers should one server fail or go offline.
1. To configure Active Directory, manually add the px4-300r to your DNS server. Set the px4-300r
DNS setting to point to your DNS server. On the Network page, uncheck Automatically
configure all network settings, type the IP address of your DNS Server in the text box, and click
Apply to save your settings.
2. Configure the px4-300r to join the Active Directory domain. On the Device Identification page,
select Active Directory if you already have an existing AD user organization that you want to
incorporate into the px4-300r.
3. Provide the following connectivity information:
●
●
Domain Name — the actual name of your Active Directory domain, for example, sohoad.com.
Preferred Server — the actual name or IP address of your Active Directory Server, for
example, ad-server.sohoad.com or 10.14.50.12.
●
Netbios Name — An optional value that is automatically set to the first part of the Domain
Name. For example, if you Domain Name is testdomain.emc.com, the Netbios Name is
testdomain. You can edit this name or leave it blank.
●
●
●
●
Organizational Unit — an optional predefined subset of directory objects within an Active
Directory domain.
Administrator Username — the Active Directory username with domain administrator
privilege.
Administrator Password — the Active Directory password for the specified Active Directory
username.
Users/Groups Refresh Interval — how often the px4-300r should refresh the list of available
users and groups from the Active Directory server.
●
●
Local Network Encryption (SSL) — enforces encryption on your local network.
Remote Network Encryption (SSL) — enforces encryption outside your local network, such
as through the internet. Choices for both encryption types are Not required and Always
(encryption is always enforced). Always encrypting communication is safest, but can impact
performance.
●
Enable trusted domains — enables your px4-300r to allow access to other domains.
4. Click Apply to save your settings.
Configuring Your px4-300r Network Storage Array to Use Active Directory
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Enabling Active Directory Trusted Domains
By enabling Active Directory trusted domains on your px4-300r, you enable the importing of users and
groups from other trusted domains to your px4-300r device. Those users and groups from other domains
will then have access to features on your px4-300r, including accessing folders and documents in Shares,
and joining any Personal Cloud of which the device is a member.
Now that you have enabled access to all trusted domains, you can add users and groups from those
trusted domains to your px4-300r. For more information, refer to Managing Users and Groups with Active
12
Configuring Your px4-300r Network Storage Array to Use Active Directory
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Customizing the Access to Features on Your px4-300r
Network Storage Array
An administrator user can customize the look of the px4-300r Management Console using Feature
Selection (FS). Using FS, an admin can enable the display of certain features and disable others. In
addition, an admin can provide non-administrator users access to certain features by setting permissions
for those users.
Access permission to a feature can be given only to non-administrator users, since admin users
always have access to all features. Setting access permissions for non-admin users requires that
security is enabled on your px4-300r Network Storage Array and an administrator user is created.
Enabling the Display of Features
1. Open the Feature Selection page.
All the features of your px4-300r display on the page with a status that indicates whether the
feature is enabled or disabled.
2. To enable a feature, expand the desired feature name, and click the switch to On. For example, to
enable Amazon S3, expand the Amazon S3 feature, and click the switch to On.
3. To disable a feature, click the switch to Off.
You can set the display of applications on the Feature Selection page, provided an application has
Enabling Access Permissions to Features
You can configure access permissions for non-administrator users with certain features. Expand the
feature on the Feature Selection page to determine if it supports feature access permissions.
1. If not already enabled, enable security on your px4-300r and create users and groups.
2. Open the Feature Selection page.
3. To enable access to an enabled feature, expand the desired feature name, and click
access permissions.
Add
4. In the pop-up window, select one or more users to provide them access. If you have created
groups, you can also limit access for them in this way.
5. Click Apply to save your changes.
The list of users with access is displayed under the feature. To remove user access, uncheck the
access box next to the user, and click Apply to save your changes.
You can enable access permissions for applications on the Feature Selection page, provided an
application has that capability. For more information on installing features, refer to the Application
Customizing the Access to Features on Your px4-300r Network Storage Array
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Non-Administrator User Log In
Non-administrator users can log in to a px4-300r with feature access enabled. When these non-admin
users access a px4-300r, they first see the Login screen where they enter their login credentials. After
logging in, the px4-300r Management Console displays with those features to which a non-admin user has
access.
14
Customizing the Access to Features on Your px4-300r Network Storage Array
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Obtaining Alerts About Your px4-300r Network Storage
Array
You can configure your px4-300r to send email alerts when problems are detected. This is done through the
email notification feature. Email notification provides a destination for emails sent by the px4-300r when
problems are detected. To provide a destination email address, enter the following information:
●
Destination Email Addresses — enter a valid email address or addresses. This email address
provides a destination for messages sent by the px4-300r when problems are detected by the
system. You can add multiple email addresses by separating them with commas, spaces or
semicolons.
●
●
Check Send a test email message to confirm that email notification is working properly.
Check Configure custom SMTP settings only if your network blocks SMTP traffic, requiring
additional credentials, such as a corporate firewall.
Most users will not need to check this option. If checked, enter the following additional information
to identify your SMTP server:
●
●
Email Server (SMTP) — enter the address of your SMTP server.
Sender Email Address — enter an email address for the px4-300r to use as the From address
when it creates messages.
●
●
●
Email Login — enter the username used to log into the email account you entered above.
Email Password — enter the password for the email account.
Confirm Password — confirm the password for the email account. It must match the
password provided above.
If your email application uses a SPAM blocker, it is recommended that you add a sender email
address to your safe list. If you do not define additional credentials, the default sender email is:
Click Apply to save your changes.
Obtaining Alerts About Your px4-300r Network Storage Array
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Tracing Events on Your px4-300r Network Storage Array
The Event Log page displays only the 1000 most recent events logged to the px4-300r. A complete event
log, however, is available for download.
The following icons indicate the severity of each status message:
●
●
●
INFORMATION
Identifies that a change has been made to the state of your px4-300r device, usually by a user,
such as attaching a peripheral.
WARNING
Identifies that there is a problem with your px4-300r device that requires your attention, but your
device will continue to operate normally for now.
ERROR
Identifies an urgent problem with your px4-300r device that may result in data loss and requires
your immediate attention.
You can sort the displayed list by Date, User, or Event by clicking the column headers.
Downloading the complete event log file
Click Download to download a comma-separated event log file. A new page is opened with a link to the
event log file. Click the event log file link to download or open the file.
The downloaded file contains 5 columns: Number, Date, User, Severity, Message.
16
Tracing Events on Your px4-300r Network Storage Array
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Obtaining System Status for Your px4-300r Network
Storage Array
The System Status page displays space usage information and status information about your px4-300r
Network Storage Array. It also provides a control panel that enables you to:
●
●
●
Blink the lights
Restart
Shut down
Space Usage
The Space Usage section graphically represents the amount of space used by Shares on the px4-300r.
The exact space used displays in a ToolTip when you mouse over each Share.
Control Panel
The Control Panel displays commands for the px4-300r:
●
Blink the lights
To help identify a specific px4-300rwhen there is more than one device configured on your
network, blink the lights on the front of the px4-300rby clicking:
●
●
Restart
Restart the px4-300r.
Shut down
Shut down the px4-300r.
Before shutting down the px4-300r, be sure you have access to the physical device to turn it on. It
is recommended that you always use the power button to shut down the device.
Device Information
The Device Information section displays various hardware, software, and status details.
Status
The Status Information section displays changes to or issues with your px4-300r. If an issue requires user
action to resolve, such as a warning or error message, the px4-300r Management Console displays a link
in the status message.
The following types of messages can display:
INFORMATION Identifies that a change has been made to the state of your px4-300r, usually by a
user, such as attaching a peripheral.
WARNING
Identifies that there is a problem with your px4-300r that requires your attention, but
your device will continue to operate normally for now.
ERROR
Identifies an urgent problem with your px4-300r that may result in data loss and
requires your immediate attention.
Obtaining System Status for Your px4-300r Network Storage Array
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Using Your px4-300r Network Storage Array in Various
Time Zones
You can set the date and time used on your px4-300r, so that it can appear to be in one time zone, when it
actually may be in a different one. This can help your users have the correct date and time if they live and
work in a location different from your px4-300r. You can set the date, time, and time zone through the Date
and Time feature.
When an Active Directory Domain is in use, the storage device synchronizes time with the
domain controller.
1. To change time zones, select a Time Zone from the drop-down menu, and then select how time
will be set for the px4-300r:
●
Internet Time Server — By default, Automatically synchronize with an internet time server
and Use the default time server are selected. To specify a time server, select Specify the time
server and type the URL of the internet time server you wish to use in the text box that
displays.
●
Manual — Select Manually set date and time. To set the current date and time, click the
appropriate icon for calendar and clock settings.
2. Click Apply to save your changes.
18
Using Your px4-300r Network Storage Array in Various Time Zones
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Setting the Display Language for Your px4-300r Network
Storage Array
You can set the display language for your px4-300r through the Languages page.
The Languages page allows you to change the language used in email notification messages.
The language used by the px4-300r Management Console is based on the preferences configured in your
browser. You can change the language used in this program by modifying your browser's preferred
language settings.
Click Apply to save your changes.
Setting the Display Language for Your px4-300r Network Storage Array
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Printing Documents
Printing documents from your px4-300r Network Storage Array is simple after you have attached a
compatible printer to the px4-300r. The Printers page displays a table of printers that are attached to the
px4-300r. The table contains for each printer the name, model, status, and number of documents waiting.
To attach a printer, simply plug a supported printer's USB cable to a USB port on the px4-300r. Once
attached, the printer will appear in the table. When the cable is unplugged, the printer will be removed from
the table.
For best results, use a printer without multi-function features (for example, scanner, copier, fax,
modem).
20
Printing Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your px4-300r NetworkStorage Array
Setting up Personal Cloud, Security, and File Sharing
After you have configured some basic features of your px4-300r Network Storage Array, you may also
want to set up a LenovoEMC Personal Cloud, security, or file sharing.
You can set up a Personal Cloud to allow invited users access to content on your px4-300r. This content
can be in private Shares that are exclusive to the users who join the Personal Cloud, which adds an
additional layer of security. In addition, you may want to join other trusted devices to the Personal Cloud,
so that content on those devices can be made available to Personal Cloud users. For more information
You can enable security so you can secure Shares, create users, and allow selected features to be
enabled. With security enabled, you can create users and set access privileges for those users to limit
data access on secured Shares. For more information on security, refer to What Is Security and Do I Need
It?
It is recommended to set up file sharing so that content can be added to your px4-300r, and that content
can be made available in a wide variety of ways, including content features such as Active Folders and
Setting up Personal Cloud, Security, and File Sharing
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Sharing Overview
Your px4-300r Network Storage Array is set up for storing, retrieving, and accessing files among users,
client computers, and applications.
File sharing is accomplished by creating Shares; setting up security, which includes creating
users; setting up media services; and configuring Active Folders.
Interfaces for Sharing
Your px4-300r has three separate interfaces for file sharing:
●
px4-300r Management Console
You manage the creation of Shares through the px4-300r Management Console.
●
LenovoEMC Storage Manager
Optionally installed on your local computer, LenovoEMC Storage Manager discovers any
LifeLine-based network storage devices on your subnet, maps device Shares to computers, and
provides local access to your content. It provides access to Shares through your computer's file
management program, such as Windows Explorer or Mac Finder, allowing you to drag and drop
many files between your computer and your px4-300r device. Installing LenovoEMC Storage
Manager is optional.
●
Home Page
The Home page serves as a web-accessible interface to your px4-300r device. The Home page
content is configured using the px4-300r Management Console. The Home page displays any
unsecured Shares. It can also display secured Shares accessible only to users who log in to the
px4-300r device. You can access the Home page of your px4-300r device by entering the device
name or IP address directly in your browser. If security is enabled and you are an administrator
user, you can access the px4-300r Management Console from the Home page by clicking
.
23
Sharing Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Shares
What are Shares and How Do I Organize Content with Them?
Shares are folders that contain all types of content, including documents, pictures, and music files. Shares
can be unsecured, which means that anyone who has access to your network can access the content in
these Shares. Shares can also be secured, which means access to content in them is limited to select
users and groups.
All Shares on the px4-300r are displayed on the Shares page. The Shares page displays a table that
contains folders, connected drives, and any cloud storage to which your px4-300r is connected. The
Properties column displays the features that are enabled for each Share.
Share Information
The Information section displays the Share name, graphically displays the space usage of the Share, and
allows you to view the content using the web-based content viewer.
To view the content of a Share, click View Content to open the Content Viewer.
Access Permissions
The Access Permissions section contains a list of users who currently have access to that Share. Access
Permissions displays when the px4-300r is secured, otherwise the section is not shown. If "Everyone" has
access to a Share, it means content on the Share can be viewed by anyone with access to your network
without needing to log into the px4-300r.
Active Folders
Follow the link to the Active Folder options for information on configuring each:
●
●
●
●
●
●
Adding Shares
1. From the px4-300r Management Console, click Shares.
2. To add a new Share, click
Add a Share. Type a name for the Share. All Shares must have a
name. Names cannot exceed 32 characters. The following are not valid Share names: global,
homes, printers.
3. Click Create. To modify an existing Share, click the Share row to expand the Share.
Shares
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Managing Shares
You can change Share information, change access permissions, make a Share an Active Folder, use
Share volumes, and modify a Share volume.
If available, you can also enable NFS secured access.
Changing Share Information
1. Modify the existing name for the Share.
2. Choose whether to enable media sharing. When Media sharing is enabled, the media server scans
this Share for any media content and makes it available to anyone with access to your network,
even if this Share is secured. If you do not want media content made available to anyone, do not
check this option. When Media sharing search is enabled,
Share.
displays in the Properties for that
3. To view the content of a Share, click the View Content link to open the Content Viewer.
4. Click Apply to save your changes.
Changing Access Permissions
1. Expand Access Permissions to change user permissions to a Share. If your px4-300r is not
secured, all Shares that you create are unsecured, and anyone with access to your network has
read and write permissions to a Share. If your px4-300r is secured, all existing administrator users
have read and write permissions to a Share. New Shares created on a secured device will be
secured by default, so they will be accessible only by administrator users unless additional access
permissions are set. A security icon
displays in the Share's properties if that Share is secured.
2. Check Allow users to change file level security to allow file and folder permissions to be set
through other programs, such as Windows Explorer, independent of the px4-300r. Setting this
option allows users to put additional access restrictions on individual files and folders.
3.
To limit access to this Share to a specific set of users, click
Add access permissions and
choose one or more users from the pop-up window. If you have created groups, you can also limit
access for them in this way.
4. In the Access Permissions section, check Read, Write, or both to set access to this Share for
each user. To remove a user, leave both Read and Write unchecked for that user. If you grant Read
and Write permissions to Everyone, the list of users is also cleared since all users will have access
to this Share. If you have created groups, you can also limit access for them in this way.
5. Click Apply to save your changes.
25
Shares
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Enabling NFS Secured Access
2. On the Shares page, select a secure Share and expand the NFS section. You cannot apply a rule to
an unsecured Share.
3.
Click
Add an NFS rule to add a Host Name for the rule. Rules are added to specify the hosts
that are allowed to access Shares using NFS. Use this table to add NFS rules to specify access for
hosts. For example, *.cs.foo.com matches all hosts in the domain cs.foo.com. To export a Share to
all hosts on an IP address or local network simultaneously, specify an IP address and netmask pair
as address/netmask where the netmask can be in dotted-decimal format, or as a contiguous mask
length. For example, either /255.255.252.0 or /22 will result in identical local networks.
4. When the rule is added, read access is automatically set to the Share. Select Write to allow users
to write to that Share. Use and to modify the rule priority for NFS access.
5. Click Apply to save your changes.
Making a Share an Active Folder
1. You can optionally enable Active Folders on a Share to allow you to associate this Share with a
specific feature that will happen automatically when files are copied to the Share. For example, you
can enable a Share as a social media active folder to upload a file to a social media site. Refer to
Sharing Content with Social Media Overview. You can only set one Active Folder option per Share.
2. Expand the Active Folder section and check Enable. Select one of the following Active Folder
options and follow the link for details on configuring each:
●
●
●
●
●
●
3. Click Apply to save your changes.
Using Share Volumes
When you create a Share, you can use an existing volume or create a new one for that Share. After that
Share is created, you cannot move it to a different volume. You can modify the volume by changing its
size.
1.
To set the volume for a Share as you are creating it, click
Information section.
Change volume allocation in the
2. Choose whether to use an existing volume or to create a new one. For more information on existing
3. Select an existing Storage Pool in which to place the volume.
4. If you are selecting from more than one existing volume, select a volume from the Volume drop-
Shares
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
down menu.
5. If you are creating a new volume, enter a name for the volume in the Volume text box.
6. Enter a size for the volume. You cannot reduce this size later.
7. Click OK.
8. In the Information section, click Apply to save your changes.
Modifying a Share Volume
1.
Click
Change volume allocation in the Information section.
2. Enter a new size for the volume.
3. Click OK.
4. In the Information section, click Apply to save your changes.
Deleting Shares
To delete a Share:
1. From the px4-300r Management Console, click Shares.
2. To delete an existing Share, click to expand the Share.
3. In the Information section, click Delete to delete the Share.
4. In the Delete Share confirmation pop-up window, click Yes.
5. If you do not wish to delete the Share, click Cancel to return to the Shares page.
27
Shares
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Using Protocols to Share Files
What Are Protocols and How Do I Use Them to Share Files?
Your px4-300r Network Storage Array uses communication protocols to mount file systems and allow files
to be transferred between client computers and the px4-300r.
The px4-300r includes the following protocols for file sharing:
●
●
●
●
●
●
●
●
●
●
●
AFP File Sharing for Macs
The Apple Filing Protocol (AFP) enables Apple file sharing, which is the preferred method for Mac users to
access Shares. When AFP is enabled, you can use Time Machine to back up a Mac client computer to
your px4-300r Network Storage Array. See Backing up Macs with Time Machine for detailed instructions.
AFP is on by default. If AFP has been disabled, click the switch on to re-enable it.
Bluetooth File Sharing
Once a Bluetooth adapter is detected, files can be uploaded from a Bluetooth device to a configurable
destination Share on the px4-300r.
Configuring Bluetooth settings
1. To enable Bluetooth, click the switch on.
2. Once Bluetooth Transfer is enabled, check the Enable security checkbox to require Bluetooth
users to supply a unique PIN that they have defined before allowing them to transfer files to the
destination Share on the px4-300r.
devices attempting to upload data using Bluetooth.
3. To set the destination Share, click
4. Click Apply to save your settings.
.
Using Protocols to Share Files
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
To change any Bluetooth settings, click
.
FTP File Sharing
On the Protocols page, click the switch to turn on FTP (File Transfer Protocol) and allow access to your
px4-300r Network Storage Array.
Click
When you turn on FTP, you can send files to your px4-300r.
NFS File Sharing
On the Protocols page, click the switch to turn on NFS (Network File System). This protocol allows remote
hosts to mount file systems over a network and interact with them as though they were mounted locally to
your px4-300r. Your px4-300r Network Storage Array uses NFS version 4, which improves security and
performance.
Select an option to choose how users on client computers are mapped to the px4-300r:
Set the squashing options for NFS:
●
To have all users, including root, map as guest, select Treat client users as guest (all_
squash). All files are owned by user guest, and all users accessing the px4-300r have the same
access rights. If you have enabled Active Directory on your px4-300r, only this option is available
for mapping client computers.
●
●
To have all users map as themselves but root maps as guest, select Allow full access for client
users other than root (root_squash).
To have all users map as themselves, including root, select Allow all client users full access.
If the px4-300r is using Active Directory mode, you see the following NFS version 4 security settings:
●
●
System security - This uses Linux system security.
Kerberos security - Kerberos is a protocol that uses secret key cryptography for authentication
between client and server applications.
●
All - Combines system security and Kerberos security.
provides another protocol for sharing storage data with Linux hosts. When NFS is enabled, you can
configure rules for host-based access to secure Shares.
Rules can be added to secure Shares to specify the hosts that are allowed to access Shares using NFS.
For example, *.cs.foo.com matches all hosts in the domain cs.foo.com. To export a Share to all hosts on
an IP address or local network simultaneously, specify an IP address and netmask pair as
address/netmask where the netmask can be in dotted-decimal format, or as a contiguous mask length. For
example, either /255.255.252.0 or /22 will result in identical local networks.
To change any NFS settings, click
.
29
Using Protocols to Share Files
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Access to Shares through NFS and User Permissions
When you access your px4-300r through NFS, the access permissions to content on the px4-300r are
controlled by Host-Based Access Control rules on your client computer, not by user access permissions
on your px4-300r. This means that any valid user on the Linux computer who has access to the host (the
storage device) can access Shares on the px4-300r, even if not given specific user permission to those
Shares on the device.
rsync: Synchronizing Files with Another Storage Device or Other Computers
When you turn on this protocol, you can enable the px4-300r Network Storage Array as an rsync server.
When the px4-300r is an rsync server, it can be used as a source and/or destination device for rsync Copy
Jobs. Because of the fast and efficient nature of rsync, an rsync Copy Job can be faster than a Windows
If you enable the px4-300r as an rsync server, you can optionally set up a user account on the px4-300r for
secure rsync Copy Jobs.
Configuring rsync server settings
1. To enable rsync server, click the switch on.
2. To create a secure user account, check Configure secure rsync credentials.
3. The username is preset as rsync. You can change this to a more meaningful user account name.
Enter a password and confirm it for the rsync user account name. When you create a secure
rsync user account on the px4-300r, you allow other devices to securely copy to or from it.
4. By default, rsync uses TCP port 873 for accepting requests. You can change this value to a
different port number, if desired.
5. Click Apply to save your settings.
To change any rsync server settings, click
. You cannot enable rsync server if you have
TFTP
On the Protocols page, click the switch to turn on TFTP (Trivial File Transfer Protocol) and allow access to
your px4-300r Network Storage Array. When you turn TFTP on, you can send files to your px4-300r using
FTP.
Monitoring Your Device with an SNMP Management Tool
SNMP (Simple Network Management Protocol) provides information about the state of the px4-300r
Network Storage Arrayto various administrative computers, known as managers. When the SNMP
protocol is enabled on a device, SNMP agent software on the device reports information to the managers,
and an administrator user can perform some configuration of the px4-300r through the manager.
Information that comes from the px4-300r is called a trap. Managers and the px4-300r must be running on
the same network.
SNMP should be disabled unless you are specifically providing information to a management system that
requires this information.
Using Protocols to Share Files
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Configuring SNMP settings
1. To enable SNMP, click the switch on.
2. Enter a unique username and password to define the community.
3. Confirm your password.
4. Enter the IP address of the host in the Trap Receivers text box. To grant access to multiple
receivers, list all of them in the text box, separating each entry with a space.
5. Click Apply to save your settings.
To change any SNMP settings, click
.
SNMP Traps
A px4-300r can provide various traps to a manager. These traps provide information on the current state of
the px4-300r.
Traps include:
●
●
●
A drive may have either failed or been removed
Multiple drives may have either failed or been removed
The device encountered a file system corruption
SNMP MIB File for the px4-300r
The management information base (MIB) file is a database of various device object types, which a
manager can change. Examples of MIB objects are:
deviceName — the name of the LenovoEMC storage device
diskName — the name of drives on the LenovoEMC storage device
conTable — a table for the connected client count
raidStatus — a description of the RAID status. Values are Normal, Rebuilding, Degraded, RebuildFS,
and Faulted.
The MIB file is available for downloading by entering the following URL in your browser:
http://<devicename>/manage/mibs/lenovoemcmib.txt
Managing File Sharing with Web Access (http/https)
The Web Access protocol enables or disables the link to the Content Viewer from the Shares page. When
the Content Viewer is disabled, you cannot browse any Share content.
If you disable the Web Access protocol, you also disable the display of the home page on your px4-300r.
Refer to Sharing Your Content with the World for additional information on displaying the home page for
your px4-300r.
31
Using Protocols to Share Files
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
WebDAV: Managing Files Using HTTP or HTTPS
WebDAV (Web-based Distributed Authoring and Versioning) is a protocol that provides web-based access
to Shares on the px4-300r. With WebDAV enabled on the px4-300r, you can view, add, or delete files
through your WebDAV client using either HTTP for unencrypted access or HTTPS for encrypted access.
HTTP offers faster performance, but is not secured. Access Shares using a URL such as
http://devicename/WebDAV/Foldername. Refer to your operating system's documentation to learn how to
access files through WebDAV.
If your px4-300r has a remote access password, you must enter that password and the username
"webdav" to access your device. Your px4-300r has a remote access password only if the device
Configuring WebDAV settings
1. To enable WebDAV, click the switch on.
2. To enable WebDAV for HTTP, check Enable WebDAV Over HTTP.
3. To enable WebDAV for HTTPS, check Enable WebDAV Over HTTPS.
4. Click Apply to save your settings.
Windows DFS: Creating a Distributed Windows File System
Windows DFS (Distributed File System) organizes Shares and files on a network, such that they appear to
be all in one directory tree on a single px4-300r, even if the Shares reside on many devices.
Windows DFS terms
There are several terms to understand with Windows DFS.
●
●
●
Namespace: A virtual Share containing other folders that are located on different devices
throughout a network.
DFS root: An object that consolidates all the folders in your network and makes them available
through a single entry point. An example of a DFS root is \\DeviceName\DFSRootName.
DFS link: A folder under the DFS root.
Configuring Windows DFS settings
To enable Windows DFS, click the switch on.
1. Enter a DFS root name. The DFS root name is the starting point of a DFS namespace.
After entering a DFS root name, you add DFS links, which map to folders on other devices.
2. Click
Click to add a DFS link target to begin adding DFS links.
3. Enter the DFS link name, which includes the name of the host and Share to which you are linking.
4. Click Apply to save your settings, or click Cancel to discard your changes.
Windows File Sharing
Windows File Sharing allows you to work in Workgroup mode, using px4-300r Management Console to
create users and manage access. To enable Windows File Sharing, click the switch on.
Using Protocols to Share Files
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Sharing Content through the Home Page
Sharing Your Content with the World
When you set up the Home Page of your px4-300r Network Storage Array, you are presenting content to
anyone who accesses your px4-300r. That content includes a slideshow and unsecured Shares.
You can manage the look of the Home Page by using the Home Page Settings page. This page allows you
to display the slideshow, display unsecured Shares, name the Home Page, and turn the Home Page on or
off.
1. From the px4-300r Management Console, click Home Page Settings.
2. Click the slider switch to On to enable the Home Page on your px4-300r.
3. Select Default home page settings.
4. Enter a title for the Home Page. This title displays in the top banner of the Home Page when users
access the px4-300r. If you leave this field blank, the default device name is used.
5. Check Display Shares to display unsecured Shares. When you select to display Shares, the
user sees all unsecured Shares on the px4-300r.
6. Check Display slideshows to display picture slideshows that are in folders on the px4-300r.
Click Manage slideshows to configure any slideshows you want to display. The slideshow
7. Click Apply to save your changes, or click Cancel to discard your changes.
Deleting a Slideshow
To delete a slideshow from the list of available slideshows, click
can configure a different one.
. After you delete a slideshow, you
Custom Home Page Content
Adding a Custom Home Page
You can customize the look of the home page of your px4-300r Network Storage Array to include html
pages and client-side scripting, such as Javascript. This customized home page replaces the default
home page on the px4-300r. In addition, there are applications available on www.lifelineapps.com that can
enhance your home page content.
You add your custom html content to a Share on your px4-300r and then specify its location on the Home
Page Settings page.
Applying the Customized Home Page
1. Click the Home Page Settings feature from the px4-300r Management Console.
2. On the Home Page Settings page, select Customized home page settings.
3. In the Home Page Name field, enter the name of the start page of your custom home page. By
default, the name is index.html.
33
Sharing Content through the Home Page
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
4. Specify the destination Share where the start page and your html content exists on your px4-300r
by clicking and navigating to the Share.
WebDAV is permanently disabled.
5. Select the Share name and click Apply.
6. Click Apply to save your settings.
When you apply a custom home page for your px4-300r, the icon for opening the px4-300r
Management Console is no longer visible. To return to the px4-300r Management Console, you
must explicitly enter the URL to the management console in your browser:
IP address/manage/management.html
Sharing Content through the Home Page
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Automatically Sending Content to Multiple People at Once
You can send content to multiple people at once using an email distribution active folder. You can
automatically sent to the recipients on the email distribution list. To configure a Share as an Email Active
Folder, access Shares from the px4-300r Management Console, select or create a Share, and expand the
Active Folders section to enable and configure email distribution.
How to Set Up an Email Distribution Active Folder
Email Distribution lets you email your files to friends and family right from your px4-300r
Management Console. Use Email Distribution to share files with an email list. To prevent email
distribution list spamming, the px4-300r allows lists of 250 or fewer email recipients and sends a
maximum of six emails in a 24-hour period.
Configuring an Email Distribution Active Folder
1. From the px4-300r Management Console, click Shares.
2. Select a Share to use as an Email Distribution Active Folder, and click to expand the Active
Folder section.
3. Check Enable.
4. Select Email Distribution from the drop-down menu.
5. Include an email address in the Sender Email Address text box. Distribution is sent from this
email address.
6. You can add multiple email addresses in the Email To: text box by separating them with commas,
spaces, or semicolons.
7. Add a subject and email message for your recipients.
8. Check Send the file as an attachment, Send a link to the file, or both.
9. Click Apply to save your changes.
10. Once configured, all files in this Share are sent by email to your recipients. Click View Transfer
History to see the transfer activity from this Share to your account.
35
Automatically Sending Content to Multiple People at Once
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Sharing Content Using Social Media: Overview
If you have an account with social media services such as Facebook, Flickr, or YouTube, you can share
content on your px4-300r Network Storage Array with your friends and family using one or more of these
social media sites. To share your content using social media sites, create Shares called Active Folders,
and connect each Active Folder with a social media account. Refer to the help topic links below for more
information on these procedures. When you add photos and movies to an Active Folder, those files are
automatically uploaded to the social media site associated with that Active Folder. If you have photos or
movies you want to share with others, this is a great way to make your content available to people who
may not have access to your px4-300r.
If you have configured a Personal Cloud on your px4-300r, you can grant Personal Cloud users access to
Shares and Active Folders. This is useful if you want to allow users to add files to your social media sites.
For example, if your px4-300r has a Flickr Active Folder, you can grant Personal Cloud users access to
that Active Folder. In this manner, when photos are added to the Flickr Active Folder, either by you or by
Personal Cloud users, those photos are uploaded automatically to your Flickr account.
Note that an Active Folder can only be associated with one social media account. For example, if you want
Active Folders for your Facebook and YouTube accounts, create two Active Folders, and assign one
Active Folder to Facebook, and one to YouTube. Using this example, any photos you add to your
Facebook Active Folder are automatically uploaded to your Facebook page, and any movies you add to
your YouTube Active Folder are automatically uploaded to your YouTube page. Not only is this a fast and
easy way to share content, but uploading content to your social media sites provides an additional backup
of your content, as the content is stored both on your px4-300r and at your social media accounts.
Sharing Content Using Social Media: Overview
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Managing Your Content
You manage content on your px4-300r Network Storage Array using the Content Viewer. The Content
Viewer is a graphical file browser that lets you view and manage content in the Shares on your px4-300r.
The Content Viewer is divided into two panes. The left pane lists the Shares on the px4-300r and allows
you to delete or add a Share. If you select a Share that contains pictures, you can start a slideshow of the
pictures in that Share. The right pane lists the files and folders in a Share and allows you to delete content
or upload a file to the Share.
To delete multiple files simultaneously, hold the Ctrl key on your keyboard and select each file, or drag
your mouse over the filenames. Share content can be sorted, and you can switch between a list view and a
thumbnail view of the files. When you are looking at content in a list view and you hover your mouse over
an image, a thumbnail view of the image displays next to your mouse. If all the content cannot fit on one
page, there are pagination controls that allow you to continue browsing the content.
37
Managing Your Content
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Transferring Content to and from Your px4-300r Network
Storage Array with Copy Jobs
You can transfer content to and from your px4-300r using the Copy Jobs feature. Copy Jobs copies files
from one storage device to another, either by a set schedule or immediately by the user. An example of a
Copy Job scenario is if you keep pictures from your digital camera on a separate USB drive, but you also
want to maintain a backup of these pictures on your px4-300r. Using Copy Jobs, you can create a task that
copies your photos on the USB drive to a Share on your px4-300r, and you can set that task to a schedule
so the images automatically copy at a specific time. This ensures that your photos are always safely
backed up to your px4-300r in the event your USB device ever fails or is lost.
While a Copy Job copies all data from one NAS device to another, it does not copy permissions or
access rights from one NAS device to another.
All saved Copy Jobs display on the Copy Jobs page. From there, you can manually start and stop a Copy
Job, view Copy Job information, modify a Copy Job, check its last run status, and, if applicable, view
when the Copy Job is next scheduled to run.
When defining a Copy Job, you can copy data from or to any of the following:
●
●
●
●
Any NAS device automatically discovered on the same subnet as your px4-300r
Any NAS device that you manually add to the subnet using the LenovoEMC Storage Manager
Any external storage device, such as a USB device, connected to your px4-300r
A Windows computer that is automatically discovered on the same subnet as your px4-300r
When selecting what data to copy on the source storage device, you can choose a specific folder or all
folders. You can also copy from a folder on an external storage device mounted to your px4-300r.
When selecting the destination device, you can copy files to the top-level folder on the destination device
(the default option), or to an existing folder on this device, which adds the copied files into folders.
You can manually start or stop a Copy Job by clicking start or stop buttons on the Copy Jobs page. You
can schedule a Copy Job to run automatically at a set day and time.
Copy Jobs Limitations
●
Copy Jobs does not establish a continuous replication or mirroring relationship between the
source and destination devices. You should not set up Copy Jobs for disaster recovery.
●
Copy Jobs does not support transferring content from iSCSI drives.
Transferring Content to and from Your px4-300r Network Storage Array with Copy Jobs
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
Getting Content from a USB External Storage Device
You can transfer content to your px4-300r Network Storage Array from external USB storage devices. The
External Storage page displays a list of externally connected storage devices. You can connect supported
external storage to your px4-300r using one of the provided USB ports. When you connect external storage
to your px4-300r, that device content is accessible from the Shares page.
Safely removing external storage
Click
to safely remove the external storage. A confirmation dialog will display. Click Yes to remove
the external storage. When the external storage has been removed from the External Storage table, it is
safe to remove, and you may unplug it from the px4-300r. When the external storage is safely removed, its
associated Share is removed as well.
39
Getting Content from a USB External Storage Device
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Files
One-touch Transferring of Content from a USB Device
One touch transfer of content is created on the QuikTransfer page. On the QuikTransfer page, you can set
the default destination Share for any automatically created QuikTransfer Copy Jobs.
QuikTransfer automatically copies all files from any USB external storage device plugged into your px4-
300r Network Storage Arrayto the destination Share when the QuikTransfer button is pressed.
You must have a USB external storage device connected to the px4-300rbefore using this feature.
Setting QuikTransfer
1. Select a destination folder for the default QuikTransfer Copy Job by clicking
and selecting a
folder in the file browser. The file browser provides a way to select a Share and all its folders, or
just some of the folders under a Share.
2. Click Apply to save your setting.
One-touch Transferring of Content from a USB Device
40
Download from Www.Somanuals.com. All Manuals Search And Download.
iSCSI: Creating IP-Based Storage Area Networks(SAN)
iSCSI Overview
The iSCSI page allows you to create iSCSI drives on your px4-300r Network Storage Array and allows the
LenovoEMC Storage Manager to communicate with those drives over a network. An iSCSI drive provides
a single place for all your storage, which you can divide as needed to support all computers in your
enterprise business. iSCSI is useful for transmitting large blocks of data over a network at a high speed.
Only one client computer can connect to an iSCSI drive at a time, so iSCSI drives are not for shared data.
If your business is clustering clients, then a cluster can access iSCSI drives. Also, you must create a list
of users who can access an iSCSI drive. These are not users who have access to other features on your
px4-300r.
42
iSCSI Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
iSCSI: Creating IP-Based Storage Area Networks(SAN)
Adding iSCSI Drives
To add an iSCSI drive:
1. From the px4-300r Management Console, click iSCSI.
2. When the iSCSI page opens, click the switch to enable the feature.
3. Click Add an iSCSI drive.
4. If your px4-300r has multiple Storage Pools, select the desired Storage Pool from the drop-down
menu.
5. Enter a name for the iSCSI drive.
6. Enter a size for the iSCSI drive. The size must be smaller than the free space available on your
px4-300r.
7. Click Create to create the iSCSI drive.
Enabling iSCSI Drives
1. Click Settings to begin configuring an iSCSI drive.
2. To set the discovery of the iSCSI drive using iSNS, check Enable discovery with iSNS.
3. Choose one of the following options:
●
●
Use local iSNS server — the device acts as an iSNS server for the iSCSI drives.
Use external iSNS server — you supply the IP address or host name of the external iSNS
server for the iSCSI drives.
4. To enable the Challenge Handshake Authentication Protocol (CHAP), check Enable two-way
authentication (Mutual CHAP). With Mutual CHAP enabled, the client performs an additional
check to confirm that it is using the correct device.
5. Enter an initiator secret (password) for Device Secret and then enter it again in the confirm box.
6. Click Apply to save your changes.
Connecting to iSCSI Drives
You can connect iSCSI drives on your px4-300r to your computer using LenovoEMC Storage Manager or
the Microsoft software initiator. If you are using another type of software or hardware initiator, you must
use the native tools provided with your initiator to connect your iSCSI drives. Do not connect more than
one iSCSI initiator at a time to an iSCSI drive.
Attempting to connect two iSCSI initiators to the same iSCSI drive at the same time may result in
data corruption or drive damage. The px4-300r Management Console prevents you from
connecting two iSCSI initiators to the same iSCSI drive at the same time, but if you connect to an
iSCSI drive using native tools, you may encounter this issue. You can use the Connected
Clients section to view a list of client computers connected to your px4-300r that are running
iSCSI initiator software. On the iSCSI page, expand an iSCSI drive, then expand the Connected
Clients section. If the iSCSI drive is in use, you will see a list of connected client computers
running initiator software.
Adding iSCSI Drives
43
Download from Www.Somanuals.com. All Manuals Search And Download.
iSCSI: Creating IP-Based Storage Area Networks(SAN)
Managing iSCSI Drives
Adding CHAP User Access to an iSCSI Drive
After you add an iSCSI drive, you create a list of CHAP users that have access to an iSCSI drive. These
iSCSI CHAP users does not enable security and does not require any login to allow access to an
iSCSI drive.
1. On the iSCSI page, expand an iSCSI drive, and expand iSCSI CHAP Users to add user access
to an iSCSI drive.
2. Click
Add a CHAP user and enter a CHAP username and password.
3. Click Create. Continue adding as many users as needed to access the drive.
4. To delete a user, expand the user section and click Delete.
44
Managing iSCSI Drives
Download from Www.Somanuals.com. All Manuals Search And Download.
iSCSI: Creating IP-Based Storage Area Networks(SAN)
Deleting iSCSI Drives
To delete an iSCSI drive:
1. From the px4-300r Management Console, click iSCSI.
2. Click the iSCSI name to expand the iSCSI drive.
3. In the iSCSI Information section, click Delete to delete the iSCSI drive.
4. Click Yes in the confirmation pop-up window.
5. If you do not wish to delete the iSCSI drive, click Cancel to return to the iSCSI page.
Deleting iSCSI Drives
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
Understanding How Your Content Is Stored
content in Shares, your client computer uses network protocols, such as AFP and Windows File Sharing.
The px4-300r's file system maintains the physical location of content that resides in volumes used for
Shares. Block-level data is stored in iSCSI drives. File systems for iSCSI volumes are maintained by the
connected host computer and not the px4-300r.
Shares reside on volumes, which along with iSCSI volumes, reside in Storage Pools. Volumes allow you
to partition space in Storage Pools, and Storage Pools group multiple physical drives together into a single
logical unit to provide redundancy, availability and capacity. All the drives in a Storage Pool must be the
same size and should have the same protection (for example, RAID 1 RAID 5).
All disks within a single Storage Pool must meet the following requirements:
●
●
●
Same manufacturer
Same rotational speed
Same capacity
Mixed disk configurations may result in unpredictable device behavior and will not be supported. If
you need technical assistance, please be prepared to backup your data and remove any
unsupported drives or configurations.
Storage Pools
A Storage Pool is a grouping of drives with a certain storage size and an assigned data protection. A
Storage Pool has a minimum of one drive. By default, your px4-300r has one Storage Pool.
Storage Pool Data Protection
For each Storage Pool, you can select its type of protection. Protection type determines how data is
replicated across a Storage Pool and determines the amount of space used for data protection and
storage. The drives in your px4-300r are protected using a built-in, pre-configured technology that
redundantly stores data across the drives, so that if a single drive fails, in most cases, you will not lose any
data. This technology, known as RAID (Redundant Array of Independent Disks), enables a series of
drives to act together as a single storage system. If you create multiple Storage Pools, you can assign
Volumes
A Volume is a single storage area. A volume can be comprised of one or more hard drives. In a single-
volume system, the volume consists of the entire storage space. Shares reside in volumes. iSCSI drives
also reside in volumes.
47
Understanding How Your Content Is Stored
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
Adding and Managing Storage Pools
A Storage Pool is a grouping of drives with a certain storage size and an assigned data protection. A
Storage Pool has a minimum of one drive. By default, your px4-300r Network Storage Array has one
Storage Pool.
You can create either a data Storage Pool or a cache Storage Pool, which is a grouping of solid-state
To Add a Data Storage Pool
1. On the Drive Management page, click
Add Storage Pool.
2. In the Information section, enter a name for the Storage Pool.
3. To set the RAID protection, choose a value from the drop-down menu:
●
●
●
●
●
JBOD (None): Uses all of the storage space for data, providing contiguous storage space
spanning all member drives. Does not protect against data loss in the event of drive failure.
None (RAID 0): Uses all of the storage space for data. Does not protect against data loss in
the event of drive failure.
Mirror (RAID 1): Uses half of the storage space for protection, leaving half for actual data.
Protects data in the event of a single drive failure.
Mirror Stripe (RAID 10): Uses half of the storage space for protection, leaving half for actual
data. Protects data in the event of a single drive failure.
Parity (RAID 5): Uses the space corresponding to one drive-size for protection, leaving
remaining space for storing actual data.
4. Select the checkbox of the drive or drives you want to add to the Storage Pool. All drives in a
Storage Pool must be the same size.
5. Check Enable periodic consistency check to enable a monthly parity or mirror consistency
check.
6. If commonly used Shares, Backups, Documents, Movies, Music, Pictures, and SharedMedia do
not already exist on the px4-300r device, check Create commonly used Shares to create these
Shares and add them to the Storage Pool. This option is not available if you are creating a cache
pool.
7. Check Use for SSD Cache to allow one or more solid-state drives (SSD) to be used as a cache
pool. You can only designate SSDs as cache pool drives if they have not already been assigned
to an existing Storage Pool. This cache pool becomes assigned to the Storage Pool you are
creating.
8. Click Create to add the new Storage Pool.
9. Click Cancel to discard any changes.
Adding and Managing Storage Pools
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
Improving Performance with a Cache Storage Pool
A cache Storage Pool is a pool of solid-state drives designed to increase read and write performance on
your px4-300r Network Storage Array. You create a cache Storage Pool and then associate a volume on a
data Storage Pool to the cache pool. You can create only one cache Storage Pool on your px4-300r.
To Add a Cache Storage Pool
You first create a cache Storage Pool to begin improving performance.
1. On the Drive Management page, click
Add Storage Pool.
2. In the Information section, enter a name for the cache Storage Pool.
3. To set the RAID protection, choose a value from the drop-down menu:
●
●
●
●
JBOD
Uses all of the storage space for data, providing contiguous storage space spanning all
member drives. Does not protect against data loss in the event of drive failure.
None (RAID 0)
Uses all of the storage space for data. Does not protect against data loss in the event of drive
failure.
Mirror Stripe (RAID 10)
Uses half of the storage space for protection, leaving half for actual data. Protects data in the
event of a single drive failure.
Parity (RAID 5)
Uses the space corresponding to one drive-size for protection, leaving remaining space for
storing actual data.
4. Select the checkbox of the solid-state drive or drives you want to add to the cache pool. You can
only designate SSDs as cache pool drives if they have not already been assigned to an existing
Storage Pool. All drives in a Storage Pool must be the same size.
Typically, you create a cache Storage Pool with one solid-state drive. However, if you create a
cache pool with at least two SSD drives and apply a redundant RAID protection, such as
mirroring, you can prevent against data losses in the event one of the SSDs fails.
5. Check Enable periodic consistency check to enable a monthly parity or mirror consistency
check.
6. Check Use for SSD Cache.
7. Click Create to add the new Storage Pool.
8. Click Cancel to discard any changes.
Assigning a Cache Pool to a Volume
After creating a cache Storage Pool, you assign a volume from a data Storage Pool to the cache pool. A
cache pool can be assigned to an existing or new volume.
Storage Pool.
2. In the information section for the volume, check Use a SSD cache for this Volume.
49
Improving Performance with a Cache Storage Pool
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
3. Enter a value in the Size (GB) field to specify the amount of cache space for the volume. This
value cannot exceed the total size of the cache pool.
4. Set Cache policy using one of the following values:
●
Write-through. This is the safest of the policies. All writes are cached to the cache pool and
are also written to disk immediately. If your SSDs have slower write performance than your
non-SSD drives, this may limit write performance. Write-through caches are not persistent
through a drive removal or device reboot. All disk reads are cached.
●
●
Write-back. This is the fastest policy but is less safe. All writes go to the cache pool initially
and then are written to disk later. Write-back caches are persistent across drive removal or
device reboot. All disk reads are cached.
Write-around. This is a safe policy. Writes are not written to the cache pool. They are written
to directly to disk. Write-around caches are not persistent across drive removal or device
reboot. All disk reads are cached.
5. Click Apply to save your settings.
You can add a volume to a cache pool, but it can affect the performance of the cache pool and is
this can affect the cache pool's performance.
Improving Performance with a Cache Storage Pool
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
Volumes
Snapshots
Snapshots Overview
A snapshot is a backup of a source volume at a certain point in time. The snapshot can be taken while the
px4-300r is actively writing to the source volume, which means you do not have to stop your px4-300r from
writing to the volume. After a snapshot is taken, you have the option of restoring it to the source volume
and reverting the source volume to its state at the time the snapshot was taken.
Snapshots can be created on demand, or they can be scheduled. You can create a snapshot on an
encrypted volume. Any Shares in the source volume are added to the snapshot with a date stamp
appended to their name, for example, Documents_2012_09_22_11_22_35. You can add content to these
snapshot Shares.
You cannot create a snapshot of a volume that has iSCSI drives or volumes that have SSD cache
enabled.
Creating a Snapshot on Demand
1. On the Drive Management page, in an existing non-cache Storage Pool, expand the Volumes
section, expand the Volume name and then expand the Snapshots section.
2. Click Create a snapshot of this volume now.
3. In the Create a Snapshot dialog box, specify the following and click Apply:
●
●
Enter a size for the snapshot as a percentage of the source volume.
Choose whether to expose or unexpose the snapshot. If you unexpose the snapshot, no
content on the snapshot is available for access. If the snapshot is exposed, you can view the
contents of the snapshot. With either unexposed or exposed snapshots, you can restore files
from them.
●
●
If you do not want to write any content to the snapshot, check Make snapshot read-only.
If you select to expose the snapshot, you can check Expose for previous version only.
Previous versions is a feature in Windows only. Previous versions are copies of files and
folders that Windows automatically saves as part of a restore point. You can use previous
versions of files to restore files that you accidentally modified or deleted, or that were
damaged. To access previous versions, right-click a file or folder in Windows Explorer and
click Restore Previous Versions.
Creating Snapshots with a Schedule
1. On the Drive Management page, in an existing non-cache Storage Pool, expand the Volumes
section, expand the Volume name and then expand the Snapshots section.
2. Click Create snapshots of this volume on a schedule.
3. In the Manage Snapshot Schedule dialog box, specify the following and click Apply:
●
Check Enable snapshot schedule
51
Volumes
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
●
Specify when to take a snapshot, for example, every hour, four hours, or once a day.
Enter a start time, or click to use the sliders.
●
●
Select the days you want to take a snapshot, or select All Days to take a snapshot every day.
Enter the number of snapshots to save.
●
●
●
●
●
●
Enter a size for the snapshots as a percentage of the source volume.
Choose whether to expose or unexpose the snapshot.
If you do not want to write any content to the snapshot, check Make snapshot read-only.
If you unexpose the snapshot, you can make it read-only.
If you select to expose the snapshot, you can check Expose for previous version only.
Managing Snapshots
Snapshots display in a table under the source volume. Snapshots are named with the source Share name
and an appended date and time stamp, for example, Shares_2012_08_17_10_10_32. You cannot change
the name of a snapshot.
After a snapshot is created, you can modify it in several ways.
Exposing/Unexposing the Snapshot
Click
to alternate the snapshot between exposed and unexposed.
Restoring a Snapshot
This feature overwrites any changes in the source volume and returns it to its state at the time the
snapshot was taken. Click
to restore a snapshot. After you click this button, you are prompted to
confirm the restore. Click Yes. After you click Yes, an additional confirmation displays. The message
indicates that the source volume will be briefly unavailable, and the snapshot will be deleted. Check the
checkbox and click OK.
Deleting a Snapshot
Click
to delete a snapshot. When prompted to confirm the deletion, click Yes.
Displaying Shares in the Snapshot
Expand the snapshot Information section, and click View snapshot Shares. This opens a window that
displays all the Shares in the volume. When you list the shares, you can determine if this is a snapshot you
want to restore. Click OK to close the window. You can view the Shares in an exposed or unexposed
snapshot.
Make the Snapshot Read-only
Check Read-only to alternate snapshot between writeable and read-only.
Changing Expose Mode
In an exposed Share snapshot, you can set the expose mode for "Expose all Shares" and "Expose for
previous versions." Expose for previous versions exposes content so that you can access it through
Windows Explorer. Expose all Shares not only allows you to access old content through the previous
versions mechanism, it also creates Shares with the backup time in their name so you can access content
on computers that are not running Windows.
Volumes
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
Adding and Managing Volumes
A volume is a single accessible storage area with an allocated size. You can create volumes after creating
Storage Pools.
Shares in Volumes
All Shares on the px4-300r Network Storage Array are added to volumes, and the size of the Share is
limited by the free space of the volume. When you create a Share, you can add it to a volume at the same
time. This is the simplest method for adding a Share to a volume. For more information on adding Shares to
volumes, and the size of the iSCSI drive is limited by the free space of the volume. When you create an
iSCSI drive, you can add it to a volume at the same time. This is the simplest method for creating iSCSI
To add a new volume:
1. On the Drive Management page, expand a Storage Pool, expand the Volumes section, and
click
Add a Volume.
2. In the Information section, enter a name for the volume in the Volume field.
3. In the Size (GB) field, enter a size in gigabytes (GB) for the volume. Note that both the allocated
and available space for the volume displays.
4. When you create a new volume, you can optionally enable encryption to protect your data if your
px4-300r is lost or stolen. You can only enable encryption when you create a volume. Enabling
encryption can reduce performance since information transferred to and from the drives must be
processed using the 256-bit Advanced Encryption Standard (AES) protocol. To apply encryption
to a volume, click the Enable encryption checkbox. There are two options for encryption:
allowing the system to generate a passphrase, or creating one yourself. The passphrase is not a
256-bit encryption key.
●
Generate and save passphrase on the system — Select this option to allow the system to
store a passphrase for the volume. This type of encryption works only when the px4-300r is
powered down. If any drives are removed while your system is powered down, data on the
encrypted volume will not be accessible. When the px4-300r is rebooted, the system-
generated passphrase is automatically applied to the encrypted volume, unlocking it and
enabling data access.
●
Enter a passphrase — This is a more secure type of encryption and is the recommended
option. Click the Enter a passphrase option; then enter and verify a passphrase for the
volume. You can change the passphrase at any time. After restarting the px4-300r, an
encrypted volume is unavailable until you re-enter the passphrase. Note that the passphrase
must consist of eight or more characters.
After you create a passphrase, a new section for the volume appears called Volume Encryption.
When you want to unlock a volume, enter the passphrase in this section.
It is recommended that you save a backup of the master key file in a secure location, separate
from your px4-300r. You should not save the backup master key to a drive that is connected to
your px4-300r. If a system failure occurs, the passphrase stored on your px4-300r may be lost,
and your backup master key file is required to recover and access your data. Also, if you forget
53
Volumes
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
your passphrase, you can reset it using the backed-up master key. Click Back up master key to
back up the master key file. To reset the passphrase, click Reset passphrase with master key,
then enter a new passphrase and verify it.
5. If you are adding a volume in a cache pool, there is an option to associate the volume with a cache
pool. Check Use a SSD cache for this Volume.
6. Click Create to save your changes.
7. Click Cancel to discard any changes.
Volumes
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
Deleting a Storage Pool
1. On the Drive Management page, expand the Information section of the Storage Pool you want
to delete.
2. Click Delete.
3. The Delete Storage Pool window displays.
4. Select Check this box if you want to delete the Storage Pools.
5. Click Yes to delete the Storage Pool.
6. Click No to cancel the operation and retain the Storage Pool.
Deleting a Storage Pool deletes all Shares and data contained within the Storage Pool.
55
Deleting a Storage Pool
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage PoolManagement
Changing RAID Protection Types
You can change the RAID protection of existing Storage Pools. You can also set the RAID protection type
type can be changed only when the Storage Pool is in a normal (healthy) state. If you are unfamiliar with
RAID protection, it is recommended that you do not change this setting.
Most changes to protection type will delete all data on the Storage Pool. You can make the
following protection type changes without deleting data:
●
●
●
Expanding a RAID 5 configuration by adding one or more drives.
Migrating from RAID 1 with two disks to a RAID 5 configuration with three or more disks.
Migrating from JBOD with one disk to RAID 1 with two disks.
To change the RAID type, expand the Information section of a Storage Pool on the Drive Management
page, and choose a value from the Protection drop-down menu:
●
●
●
●
Mirror (RAID 1)
Mirror Stripe (RAID 10)
Parity (RAID 5)
None (RAID 0)
For additional explanation on these RAID types, refer to Adding and Managing Storage Pools on page 48.
Note that the displayed available capacity changes as you select different RAID types from the Protection
drop-down menu. RAID array capacity is based on drive use, which differs for some RAID types.
Click Apply to change the RAID protection.
Click Cancel to retain your previous RAID configuration.
Changing RAID Protection Types
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive Management
Managing Drives
The Drive Management page provides settings for managing storage and lets you apply global settings for
drives on your px4-300r Network Storage Array.
Setting Write Caching
Select a value for disk write caching.
Write caching is a mechanism that attempts to separate the fast processing speed of the px4-300r from
the relatively slow mechanics of actually writing data to drive.
With write caching disabled, every write to drive causes the px4-300r to wait while the data is written to
drive, which can slow performance. When write caching is enabled and the px4-300r sends a write request
to the drive, it writes the data to cache (which is much faster) and sends an immediate acknowledgement
to the px4-300r saying the write is complete. The system proceeds without waiting for the data to actually
get written to drive, which occurs in the background.
While write caching does improve performance, there are some risks. The system responds that the data
is written to drive when in fact it has only been written to cache. Should the px4-300r lose power, any data
not completely written to drive is lost forever.
This is because cache memory is volatile. If you lose power, the contents of the cache are lost. Therefore,
if there were any pending writes in the cache that were not written to the drive, they will be lost forever.
Using a UPS (Uninterrupted Power Supply) can mitigate the risk associated with write caching, which is
why it is recommended to only enable this feature when a UPS is connected.
Applying Global Drive Management Settings
1. Click
Settings.
2. Check Add drives to storage system to add a newly installed drive. You see this option only if
there is at least one unused drive on the px4-300r.
3. To change the protection, choose a value from the drop-down menu:
●
●
●
Mirror (RAID 1)
Uses half of the storage space for protection, leaving half for actual data.
Mirror Stripe (RAID 10)
Uses half of the storage space for protection, leaving half for actual data.
Parity (RAID 5)
Uses the space corresponding to one drive-size for protection, leaving remaining space for
storing actual data.
●
●
Striped (RAID 0)
Distributes data across several drives in a way that gives improved speed at any given
instant.
None
Turns off data protection and leaves your data vulnerable to data loss.
4. Select a value for disk write caching.
58
Managing Drives
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive Management
5. Check Enable periodic consistency check to enable a monthly parity or mirror consistency
check. The check helps to prevent a single drive failure from becoming a two-drive failure,
resulting in data loss. The check runs for several hours and can affect performance of the px4-
300r. If you do not want to run the check, uncheck this option.
6. Check Use available drives as hot spares to allow unused drives to become part of a RAID-
protected storage pool. If a drive in a Storage Pool fails, all the data on that drive can be mirrored
to the hot spare drive.
7. Click Apply to save your changes.
The Drive Management page displays a table that provides the following information about existing
Storage Pools.
●
●
●
●
Name — The name of the Storage Pool.
Protection — The type of protection assigned to the Storage Pool.
Capacity — The total amount of storage in the Storage Pool.
Allocated/Available — Allocated is the space allocated to share volumes and iSCSI volumes.
Available is the difference between capacity and used.
Drive Status
An image on the Drive Management page provides information on the drive status of your px4-300r. The
image displays the physical layout of drives and the drive slot numbers. If a drive has a circled letter, it is a
member of a Storage Pool. If you hover your mouse over a drive in the image, the ToolTip displays the
drive model, size, and status, including if the drive is failing.
If you hover your mouse on either a Storage Pool name in the table or on a drive in the Storage Pool image,
all drives in the Storage Pool are highlighted.
Managing Drives
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Restoring Your Content
Backup and Restore Overview
Your px4-300r Network Storage Array provides many ways to back up and restore content.
To back up content to and restore content from your px4-300r, you can use:
●
●
Time Machine
Copy Jobs
To back up and restore your px4-300r, you can use the following features and applications:
●
●
●
●
Copy Jobs
Avamar
Amazon S3
LenovoEMC Personal Cloud features
Backup of Data through RAID Protection
The drives in your px4-300r are protected using a built-in, pre-configured technology that redundantly
stores data across the drives. This technology, known as RAID (Redundant Array of Independent Disks),
enables a series of drives to act together as a single storage system. RAID configurations that provide
data redundancy preserve data integrity on the system if a drive fails and is replaced.
While RAID technology provides fault tolerance, it is not a true backup. It is strongly
recommended to always have another copy of your data that is not stored on the px4-300r.
61
Backup and Restore Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Restoring Your Content
Backing up to and Restoring from Your px4-300r Network
Storage Array
Backing up Macs with Time Machine
You can use Time Machine to back up a Mac client computer to the px4-300r network storage device.
Follow the instructions below to set up Time Machine backups to your px4-300r:
1. Connect your Mac to your px4-300r using Apple File Protocol (AFP). You can do this using
LenovoEMC Storage Manager for Mac or Bonjour.
2. Mount the Backup Share from the px4-300r network device.
If you want to create a new Share for Time Machine backups, you can do so using the px4-300r
Management Console. Mount the Share you want to use before proceeding to the next step.
3. Select System Preferences... from the Apple Menu.
4. Select Time Machine (listed under System).
5. Click ON to enable Time Machine.
6. From the list of available drives, choose the desired Share on your px4-300r, then click Use for
Backup.
7. Time Machine will automatically create the sparsebundle image under the selected Share and
begin backing up your computer to your network storage device. After the initial backup, Time
Machine backs up files every hour.
Time Machine uses a single destination drive for backups. If you have previously set up another
drive for Time Machine backups and want to change to use the px4-300r network device, click
Select Disk, then choose the desired Share on your px4-300r.
One-touch Transferring of Content from a USB Device
One touch transfer of content is created on the QuikTransfer page. On the QuikTransfer page, you can set
the default destination Share for any automatically created QuikTransfer Copy Jobs.
QuikTransfer automatically copies all files from any USB external storage device plugged into your px4-
300r Network Storage Arrayto the destination Share when the QuikTransfer button is pressed.
You must have a USB external storage device connected to the px4-300rbefore using this feature.
Setting QuikTransfer
1. Select a destination folder for the default QuikTransfer Copy Job by clicking
and selecting a
folder in the file browser. The file browser provides a way to select a Share and all its folders, or
just some of the folders under a Share.
2. Click Apply to save your setting.
Backing up to and Restoring from Your px4-300r Network Storage Array
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Restoring Your Content
Copy Jobs Overview
You can back up content to and from your px4-300r Network Storage Array using the Copy Jobs feature.
Copy Jobs copies files from one storage device to another, either by a set schedule or immediately by the
user. An example of a Copy Job scenario is if you keep pictures from your digital camera on a separate
USB drive, but you also want to maintain a backup of these pictures on your px4-300r. Using Copy Jobs,
you can create a task that copies your photos on the USB drive to a Share on your px4-300r, and you can
set that task to a schedule so the images automatically copy at a specific time. This ensures that your
photos are always safely backed up to your px4-300r in the event your USB device ever fails or is lost.
63
Backing up to and Restoring from Your px4-300r Network Storage Array
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Restoring Your Content
Backing up Your px4-300r Network Storage Array
Copy Jobs
Transferring Content to and from Your px4-300r Network Storage Array with Copy
Jobs
You can transfer content to and from your px4-300r using the Copy Jobs feature. Copy Jobs copies files
from one storage device to another, either by a set schedule or immediately by the user. An example of a
Copy Job scenario is if you keep pictures from your digital camera on a separate USB drive, but you also
want to maintain a backup of these pictures on your px4-300r. Using Copy Jobs, you can create a task that
copies your photos on the USB drive to a Share on your px4-300r, and you can set that task to a schedule
so the images automatically copy at a specific time. This ensures that your photos are always safely
backed up to your px4-300r in the event your USB device ever fails or is lost.
While a Copy Job copies all data from one NAS device to another, it does not copy permissions or
access rights from one NAS device to another.
All saved Copy Jobs display on the Copy Jobs page. From there, you can manually start and stop a Copy
Job, view Copy Job information, modify a Copy Job, check its last run status, and, if applicable, view
when the Copy Job is next scheduled to run.
When defining a Copy Job, you can copy data from or to any of the following:
●
●
●
●
Any NAS device automatically discovered on the same subnet as your px4-300r
Any NAS device that you manually add to the subnet using the LenovoEMC Storage Manager
Any external storage device, such as a USB device, connected to your px4-300r
A Windows computer that is automatically discovered on the same subnet as your px4-300r
When selecting what data to copy on the source storage device, you can choose a specific folder or all
folders. You can also copy from a folder on an external storage device mounted to your px4-300r.
When selecting the destination device, you can copy files to the top-level folder on the destination device
(the default option), or to an existing folder on this device, which adds the copied files into folders.
You can manually start or stop a Copy Job by clicking start or stop buttons on the Copy Jobs page. You
can schedule a Copy Job to run automatically at a set day and time.
Copy Jobs Limitations
●
Copy Jobs does not establish a continuous replication or mirroring relationship between the
source and destination devices. You should not set up Copy Jobs for disaster recovery.
●
Copy Jobs does not support transferring content from iSCSI drives.
Adding Copy Jobs
The page describes how to:
●
●
●
●
Backing up Your px4-300r Network Storage Array
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Restoring Your Content
Adding Copy Jobs
1.
On the Copy Jobs page, click
section displays.
. A Copy Job is added to the top of the list and the Information
2. Enter a name for the Copy Job.
3. The Overwrite Setting determines what happens to files in the destination location if they have the
same name as those in the source location. Select one of the following values from the Overwrite
Setting drop-down menu:
●
Overwrite and don't delete — Files in the destination location are overwritten with files from
the source location. Any files in the destination location that are not in the source location are
preserved.
●
Overwrite and delete — Files in the destination location are overwritten with files from the
source location. Any files in the destination location that are not in the source location are
deleted. The destination location becomes an exact copy of the source location.
●
Don't overwrite — Only files in the source location that are not in the destination location are
copied. No files are overwritten in the destination location.
From: Settings
1.
In the From: section, click
to select a source location. This is the location of the files you
want to copy. In the dialog, enter the Device Name or IP address in the text box, or select a device
from the list. If a connected device is not listed, click the Refresh button.
2. Click OK to save your selection or click Cancel.
3. The Protocol drop-down menu displays if the source device is different from the device you are
currently accessing; for example, it could be a separate NAS device on your network. From the
Protocol drop-down menu, choose one of the following:
●
Windows File Sharing — The default value in the menu is Windows File Sharing and in most
cases you should accept the default value. For more information, refer to Windows File
●
rsync — The rsync protocol can provide faster copying, but may not be available on all
devices. If you are able to select the rsync protocol, and you want the rsync Copy Job to be
secure, select the Use secure rsync (SSH) option. Enter the rsync username and password
for the rsync server to or from which you are copying. The rsync username and password is
set up on a different device than the device on which you are creating the Copy Job. For more
information on creating an rsync user, refer to rsync: Synchronizing Files with Another Storage
4. Enter a valid username and password, if applicable, for the device to provide access to its folders.
5.
To select a specific folder, click
to select a source location for the What to copy: section. In
the Copy dialog box, select all Shares or a folder, and select one of the following options for the
Copy Job from the drop-down menu:
●
The selected folder and its contents — copies the selected folder and its contents. If the
destination is a folder, a new folder will be created for each source folder. If the destination is
Top Level, a new top-level folder is created on the destination device for each source folder.
65
Backing up Your px4-300r Network Storage Array
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Restoring Your Content
●
Only the contents of the selected folder — copies the contents of the selected folder; not
the folder itself. If the destination is a folder, the files and folders in the selected folder are
copied directly to it (the source folder name is not copied). If the destination is Top Level, a
new top-level folder is created on the destination device for each folder in the source folder.
6. By selecting Shares, you choose to copy All Shares, in which all files on the px4-300r are copied.
Any files not contained in a folder are not copied. If the destination is a folder, a new folder will be
created for each source folder. If the destination is Top Level, a new top-level folder is created on
the destination device for each source folder.
7. Click OK to save your selection or click Cancel.
8. Click Apply to save your changes.
To: Settings
1.
In the To: section, click
to select a destination location. This is the location where you want
your files copied. In the dialog, enter the Device Name or IP address in the text box. Or, from the
drop-down menu, select a device in the list. If a connected device is not listed, click the Refresh
button.
2. Click OK to save your selection or click Cancel.
3. The Protocol drop-down menu displays if the source device is different from the device you are
currently accessing; for example, it could be a separate NAS device on your network. From the
Protocol drop-down menu, choose one of the following:
●
Windows File Sharing — The default value in the menu is Windows File Sharing and in most
cases you should accept the default value. For more information, refer to Windows File
●
rsync — The rsync protocol can provide faster copying but, may not be available on all
devices. If you are able to select the rsync protocol, and you want the rsync Copy Job to be
secure, select the Use secure rsync (SSH) option. Enter the rsync username and password
for the rsync server you are copying from or to. The rsync username and password is set up on
a different device than the device on which you are creating the Copy Job. For more
information on creating an rsync user, refer to rsync: Synchronizing Files with Another Storage
4. Enter a valid username and password, if applicable, for the device to provide access to its folders.
5.
To select a specific folder, click
to select a destination location for the Copy to here: section.
In the Copy to here dialog, select a Share or a folder from a Share to copy your files.
6. Click OK to save your selection or click Cancel.
7. Click Apply to save your changes.
Setting a Schedule
1. To set a schedule, expand the Schedule section.
2. In the Schedule section, select Enable Schedule for Copy Job.
3. Select the days you want the Copy Job to run, or select All Days to run the Copy Job every day.
4. Click
to select a start time. Click Done to save your time selection.
5. Click Apply to save your changes. The new Copy Job displays on the Copy Jobs page.
Backing up Your px4-300r Network Storage Array
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Restoring Your Content
Managing Copy Jobs
From the Copy Jobs page, you can add, start, stop, delete, or monitor Copy Jobs.
After you have added Copy Jobs, the Copy Jobs page displays a list of Copy Jobs. The information
section includes the name of each Copy Job, date and time it last ran, and its next scheduled time.
From the Copy Jobs list, you can perform the following actions:
Modifying Copy Jobs
1. In the list on the Copy Jobs page, find the Copy Job you want to modify, and click it to expand the
Information section.
Deleting Copy Jobs
1. In the list on the Copy Jobs page, find the Copy Job you want to delete.
2. Click
from the Actions column of the table to delete the Copy Job.
The Delete Copy Job pop-up window opens.
3. If you are sure that you want to delete the Copy Job, click Yes.
If you do not wish to delete the Copy Job, click Cancel to return to the Copy Jobs page.
Restoring Files with Copy Jobs
To restore files with Copy Jobs, create a new Copy Job that reverses the back-up Copy Job. Modify the
From and To settings to copy files from the backup location to the original source location, specify what to
restore, set overwrite settings, and choose the protocol for the Copy Job.
Backing up with Mozy Backup
The Mozy online backup service allows you to create a Mozy account, connect your px4-300r Network
Storage Array to the account, and back up Shares and folders to the Mozy cloud service.
Enabling Mozy Account Information
1. On the Mozy Backup page, click the switch on.
Note: If you do not have a Mozy account, click the link to open an account.
2. Enter a valid email address, password, license key, and country for your Mozy account.
3. To upgrade your Mozy account, click the link.
4. Click Apply to save your changes.
Selecting Folders to Back Up
5. Expand the Backup section and select the Shares and folders to back up in the tree. The tree
provides a way to select a Share and all its folders, or just some of the folders under a Share.
6. Click Apply to save your changes.
7. To create a scheduled backup, click Backup schedule settings.
67
Backing up Your px4-300r Network Storage Array
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Restoring Your Content
8. In the Mozy Backup Settings dialog box, select one of the following:
●
Automatic Backup — to generate an automatic backup anytime you add a new file or change
an existing file to your selected Shares or folders.
●
Scheduled Backup — to set up a scheduled backup.
9. If you are creating a scheduled backup, select the days you want the backup to run.
●
●
Enter the start or stop times for the backup, or click
to select the times.
To prevent performance degradation on your px4-300r, select a speed limit for the backup.
To schedule the time that the backup will run at the selected speed, enter start and stop times.
●
10. Click Apply to save your changes.
11. Click Apply to save the selected Shares and folders to back up.
12. After a backup has completed, click View log to see which files have been successfully backed
up by Mozy.
Restoring Files with Mozy Backup
To restore folders and files with Mozy Backup:
1. Click the link to restore any files and folders you back up to your Mozy account.
2. Select the desired backup from the Backup Date: drop-down menu, either the latest backup or a
previous one.
The file browser provides a way to select a Share and all its folders, or just some of the folders
under a Share.
3. Click Apply to save your changes.
The Restore section displays a table with the status of a restore, either one in progress or one that
has failed. To delete the restore task, click
finishes, the table status clears.
and confirm the deletion. When the restore
Registering with Avamar for Backup and Restore
Avamar is backup and recovery server software that uses deduplication to eliminate redundant copies of
data, reducing the required storage space. For example, your px4-300r Network Storage Array might have
100 email messages with the same 1 MB attachment. If all those emails are backed up, that same
attachment is backed up 100 times, requiring 100 MB of storage space. With Avamar and data
deduplication, only one copy of the attachment is actually stored, so 100 MB of storage is effectively
reduced to 1 MB.
When you enable Avamar on your px4-300r, you are registering with an Avamar server. You
cannot back up and restore from your px4-300r. Backup and restore operations are executed from
the Avamar server.
Registering Your px4-300r with the Avamar Server
1. On the Avamar page, click the switch on.
The Avamar Settings pop-up window opens.
Backing up Your px4-300r Network Storage Array
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Restoring Your Content
2. In the Avamar Settings pop-up window, enter the following information and click Apply to save
your settings:
●
●
Server Address — the Avamar server IP address or hostname.
Client Domain — the registered domain name from the Avamar server.
Backing up with Amazon S3
The Amazon S3 online storage service allows you to back up your px4-300r Network Storage Array to the
cloud.
Enabling the Amazon S3 Feature
1. On the Amazon S3 page, click the switch on.
If you do not have an Amazon S3 account, click the link to create an account.
2. Enter a valid access key, secret key, and bucket name from your Amazon S3 account
information.
You can create a bucket at account setup, or you can enter a new bucket for your px4-300r. Your
content lives in this bucket on your Amazon S3 account.
3. Select an existing Share on your px4-300r in which to copy files that are then backed up to
Amazon S3.
4. Click Apply to save your changes.
Backing up Files to the Amazon S3 Cloud
After you copy files to the selected Share on your px4-300r, the files are automatically backed up to the
Amazon S3 cloud service. File uploads are limited to 5 GB in size. If you delete files from the selected
Share on your px4-300r, they are not automatically deleted from the cloud service. You can manually
delete those files from the cloud service by clicking a command on the Amazon S3 page.
Restoring Files with Amazon S3
When you want to restore files from the Amazon S3 cloud service to your px4-300r Network Storage Array,
you can choose to restore all files or select individual files to restore.
Backing up with LenovoEMC Personal Cloud
You can back up content on your px4-300r Network Storage Array by creating a Copy Job from the
LenovoEMC Personal Cloud hosted on the device to another LifeLine-based network storage device that is
a member of the same Personal Cloud.
Refer to LenovoEMC Personal Cloud help for additional information.
Restoring Files with Personal Cloud
You can restore content on your px4-300r by creating a Copy Job from the LenovoEMC Personal Cloud on
it to another px4-300r that is a member of the Personal Cloud.
Refer to LenovoEMC Personal Cloud help for additional information.
69
Backing up Your px4-300r Network Storage Array
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
What Is Security and Do I Need It?
Security is an optional feature you can enable on your px4-300r Network Storage Array to secure Shares,
create users, and allow some features to be enabled. When you create users, you can limit access to your
px4-300r to specific people, and when you secure Shares, you limit data access to specific users. Security
adds an extra layer of protection to your px4-300r beyond whatever form of security you have on your local
network. Without security, all data on your px4-300r can be accessed by anyone on your local network.
To secure your px4-300r:
●
●
●
●
●
Secure any existing or new Shares.
Secure any existing or new iSCSI drives.
71
What Is Security and Do I Need It?
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
Enabling Security and Creating an Administrator User
With security turned on, only administrator users can view or change settings on the px4-300r, including
creating or deleting users and Shares. When you create users, you limit access to your px4-300r to
specific people, and when you secure Shares, you limit data access to specific users.
1. On the Security page, click the switch on.
2. When you turn security on, you will be asked to create an administrator user. Provide a username
and password, and then confirm your password.
3. Encryption is always available when you access your px4-300r using https. By setting local
encryption, you enforce encryption on your local network. By setting remote encryption, you
enforce encryption outside your local network, such as through the internet. Choices for both
encryption types are Not required, Passwords only (passwords are encrypted through https), and
Always (encryption is always enforced). Always encrypting communication is safest, but can
impact performance.
When security is turned on, browser communications with the px4-300r are encrypted. Therefore,
each computer that attempts to access the px4-300r may encounter a security warning, which
can be safely ignored. In addition, you may be asked to accept a signed certificate for the px4-
300r , which you should accept. If you change the device name at a later date, these warnings
may appear again.
4. If you have your own security certificate, you can load it by selecting Use an imported
certificate and browsing to the certificate to load it.
5. Click Apply to save your changes.
Disabling Security
Disabling security will cause all defined users to be deleted.
If you are using other features on your px4-300r that require security, you cannot disable security
until those features are also disabled.
1. On the Security page, click the switch off.
2. Disabling security will cause all defined users and groups to be deleted. Check the box to disable
security.
3. Click Apply to save your changes.
Security is disabled.
Enabling Security and Creating an Administrator User
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
Limiting Access to Your Content by Creating Users
When you create users, you are selecting the specific people that have access to your px4-300r Network
Storage Array. You can secure Shares and specify which users can read and write to the secured Shares.
You can also create additional administrator users who can manage the px4-300r through the px4-300r
Management Console. Administrator users can change various settings on the px4-300r, including adding
and deleting Shares. If you create groups, you can also limit access to your px4-300r by group so you don’t
have to specify access for each individual user.
73
Limiting Access to Your Content by Creating Users
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
Users
Users and Groups Overview
When security is enabled, the Users & Groups page displays all users and groups on the px4-300r
Network Storage Array and enables administrators to add and modify users and groups.
Non-administrator users can be added to limit access to Share content. Additional administrator users can
be added to allow specific users to configure the px4-300r.
The table displays the Usernames and Descriptive Name of each user and group. Click in a row of the
table to view or modify details about a user or group.
Adding Users
To add a user:
1. Navigate to the Users & Groups page.
Storage Arraypx4-300r. If security is already enabled, you are ready to add users. If not, a pop-up
window appears for enabling security and create an administrator user to manage your secured
px4-300r.
3. To add a new user, click
Add a user.
4. Enter the following information:
●
Username — enter the username of the user to be created. This is the username for logging
into the px4-300r. There is a maximum of 32 characters, and spaces are not allowed. The
following are not valid usernames: root, daemon, bin, sys, sync, mail, proxy, www-data,
backup, operator, sshd, postfix, nobody, unuser, guest, and rsync.
●
●
●
●
●
Descriptive Name — add a descriptive name to identify the user. For example, if you created
a user with a Username of jsmith, you may want to add the Descriptive Name Joe Smith.
Password — create a password for the user. The password should be at least 8 to 12
characters, and spaces are not allowed. The maximum password length is 32 characters.
Confirm Password — confirm the password. If the text in this field does not match the text in
the Password field, an error will be returned.
Quota Size — set a quota size by entering a value in gigabytes. This limits the amount of
storage space this user can have. To have no quota, leave this field blank.
Administrator — check this box to allow this user to manage the px4-300r.
Note: An administrator does not have default access to all Shares. Access to Shares must be
granted explicitly to all users, including administrators.
●
Add a secured Share for this user — check this box to create a secured Share for this user.
This Share will have the new user's name, and allows access only to that user.
Users
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
●
Send a Personal Cloud invitation — click this link to invite a user to join your Personal Cloud
on the px4-300r. This opens the Send a Personal Cloud Invitation dialog box where you create
an invitation by entering a user's email address along with any additional comments. A user
then receives the invitation, which contains the Personal Cloud name and username and
password. A user enters that information from LenovoEMC Storage Manager. For more
information on this, refer to the online help with LenovoEMC Storage Manager. You see this
●
Allow this user to add trusted devices to my Personal Cloud — check this box to allow a
computer or another px4-300r, that belongs to an added user. Only trusted devices that belong
to users that have been added to the px4-300r can join the LenovoEMC Personal Cloud. This
5. Click Create.
Managing Users
The page describes how to:
●
●
●
Changing User Information
1. Modify the following information:
●
Username — enter the username of the user to be created. This will be the username provided
when logging into the px4-300r Network Storage Array. There is a maximum of 32 characters,
and spaces are not allowed. The following are not valid usernames: root, daemon, bin, sys,
sync, mail, proxy, www-data, backup, operator, sshd, postfix, nobody, unuser, guest, and
rsync.
●
●
●
●
Descriptive Name — add a descriptive name to identify the user. For example, if you created
a user with a Username of jsmith, you may want to add the Descriptive Name Joe Smith.
Password — create a password for the user. The password should be between 8 and 12
characters, and spaces are not allowed.
Confirm Password — confirm the password. If the text in this field does not match the text in
the Password field, an error will be returned.
Send a Personal Cloud invitation — click this link to invite a user to join your Personal Cloud
on the px4-300r. This opens the Send a Personal Cloud Invitation dialog box where you create
an invitation by entering a user's email address along with any additional comments. A user
then receives the invitation, which contains the Personal Cloud name and username and
password. A user enters that information from LenovoEMC Storage Manager. For more
information on this, refer to the online help with LenovoEMC Storage Manager. You see this
75
Users
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
●
Allow this user to add trusted devices to my Personal Cloud — check this box to allow a
computer or another px4-300r, that belongs to an added user. Only trusted devices that belong
to users that have been added to the px4-300r can join the LenovoEMC Personal Cloud. You
●
●
Quota Size — set a quota size by entering a value in gigabytes. To have no quota, leave this
field blank.
Administrator — check this box if you would like to allow this user to manage the px4-300r.
An administrator does not inherently have access to all Shares. Access to Shares must be
granted explicitly to administrators, as with other users.
2. Click Apply.
Changing Access Permissions
1. Expand Access Permissions to change Share access permissions for the selected user.
2. To give this user access to a specific set of Shares, click Add access permissions.
3. In the Add Access Permissions pop-up window, select which Shares this user can access, and
click Apply.
4. Uncheck Read or both Read and Write to limit or deny access permission to each Share for this
user.
5. Click Apply to save your changes. When both Read and Write are unchecked, the Share is
removed from the list.
Setting Quotas
You can limit the amount of space allocated to one or more users by applying quotas.
If your px4-300r has multiple Storage Pools and you define a quota for users, that quota is applied
to all Storage Pools.
1.
Click
Quota Settings to enable quotas, and set a default quota for each user.
2. In the Quota Settings pop-up window, check Enable quotas to turn on quotas for each user.
3. If desired, enter a Default Quota. This quota applies to new users only.
4. Check Set default quota for all users to apply the default quota to all users.
5. Click Apply to save your changes.
6. To set individual user quotas, expand the Information section for a user and enter a value in Quota
size. If you leave the box blank, there is no quota for that user.
7. Click Apply to save your changes.
Deleting Users
To delete a user:
1. From the px4-300r Management Console, click Users.
2. To delete an existing user, click the username to expand the user.
Users
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
3. In the User Information section, click Delete.
4. In the Delete User pop-up window, click Yes.
5. The user is removed from the user list.
77
Users
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
Groups
Groups Overview
Groups consist of one or more users, and administrators can grant each group rights to Shares on the px4-
300r Network Storage Array. Users can belong to more than one group. The Groups page enables
administrators to create one or more groups, and grant each group rights to Shares on the px4-300r.
Security must be enabled before you can create groups.
you have not done so already.
By default, there are no groups defined. Once an administrator defines one or more groups, the Groups
functionality is dynamically available when creating, modifying, and viewing users, Shares, and groups.
How Access Rights Are Granted Using Groups in Workgroup Mode
When groups are defined in Workgroup mode, a user's access rights are the most rights granted to the
user and all groups to which the user belongs. For example, assume 3 Shares exist (SF1, SF2, and SF3),
two users (UserA and UserB), and three groups (Group1, Group2, Group3). When created, UserA was not
granted access rights to any Share, and UserB was granted Read rights to SF3. Group1 has Read/Write
rights to SF1, Group2 has Read/Write rights to SF2, and Group3 has Read/Write rights to SF3. If UserA is
added to Group1, UserB is added to Group2, and Group1 is added to Group3, the table below shows the
resulting access rights for each user and group defined:
Name
Member of Group
Access Rights
UserA
UserB
Group1
Group2
Group3
Group1, Group3
Group2
Group3
none
SF1 - Read/Write SF3 - Read/Write
SF2 - Read/Write SF3 - Read
SF1 - Read/Write SF3 - Read/Write
SF2 - Read/Write
none
SF3 - Read/Write
Adding Groups
1. On the Groups page, click
Add a group. The Information section opens.
2. From the Information section, give the new group a name.
3. To add users to the group, click
Add users. Select a user or users to include in the group.
Select the checkbox in the title bar to add all listed users.
4. Click Apply to save your changes.
Managing Groups
The page describes how to:
●
●
Groups
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
Removing a User from the Group
1. Open a group to display users belonging to it.
2.
To remove a user from the group, click the
next to that user. When the Remove user pop-up
window appears, click Yes to remove the user.
Changing Access Permissions
1.
To refresh the list of users, click
above the table.
2. Expand Access Permissions to change group permissions to a secured Share. If iSCSI is
enabled, you can also change group permissions to secured iSCSI drives.
3.
To add permissions to a Share, click
Add access permissions.
4. From the Add Access Permissions pop-up window, select a Share or Shares for the group to
access. If iSCSI is enabled, select iSCSI drives for the group to access. Select the checkbox in the
title bar to select all the Shares listed. If iSCSI is enabled, select the checkbox in the title bar to also
select all the iSCSI drives listed.
5. Click Apply to save your changes.
6. In the table listing the Shares, check Read or Write for each Share. If iSCSI is enabled, check
Read or Write for each iSCSI drive. The group can have full access by checking both Read and
Write. To grant only read access, check only Read.
NOTE: A group must have read access at a minimum. A group cannot have only write access.
7. Uncheck Read to remove all access to a Share and remove the Share from the table. If iSCSI is
enabled, uncheck Read to remove all access to an iSCSI drive and remove the iSCSI drive from
the table.
8. Click Apply to save your changes.
9. If NFS is enabled, the GID field is visible. The GID value must be the same on both the Linux client
and the px4-300r Network Storage Arrayfor the client to access files. To modify the GID, type a
new GID value.
Deleting Groups
To delete a group:
1. From the px4-300r Management Console, click Groups.
2. To delete an existing group, click to expand the group.
3. In the Information section, click Delete to delete the group.
4. In the Delete Group confirmation pop-up window, click Yes.
5. If you do not wish to delete the group, click Cancel to return to the Groups page.
79
Groups
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
Using Active Directory Domain to Manage Users and
Groups
Active Directory Users and Groups Overview
On the Users and Groups page, administrator users can import users and groups from an Active Directory
(AD) server and grant them access rights to Shares on the px4-300r Network Storage Array. In addition,
you can also have both local and AD users on your px4-300r. See Managing Your px4-300r Network
Storage Array with Local and Active Directory Users on page 82for more information. For more information
on enabling AD on the px4-300r, refer to Configuring Your px4-300r Network Storage Array to Use Active
Directory on page 11. For information on creating an administrator user, refer to Enabling Security and
Managing Users and Groups with Active Directory
The page describes how to:
●
●
●
●
Importing Users and Groups from Active Directory
1.
Click
Import Users and Groups from Active Directory.
2. The pop-up window for Import Users and Groups from Active Directory is searchable, and you
can sort by name, descriptive name, or type. You can filter the list of users and groups by selecting
a specific user or group from the domain tree.
3. Select the checkbox next to a user or group to import that user or group to your px4-300r Network
Storage Array from your Active Directory domain. Select the checkbox in the title bar to select all
the users and groups in your Active Directory domain.
4. Click Apply to save your changes.
Synchronizing with the Active Directory Controller
You can poll the Active Directory controller at any time to check for new users and groups on the controller,
so you can add them to your px4-300r. This keeps your px4-300r up to date with any group changes on the
controller and indicates if any users on the controller were deleted or promoted.
●
Click
Synchronize with the Active Directory Controller.
Changing Access Permissions
Expand Access Permissions to change user or group permissions to a secured Share. When the px4-300r
is in AD mode, AD and local users can have access to a secured Share. See "Managing Your px4-300r
Using Active Directory Domain to Manage Users and Groups
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
1.
To add permissions to a Share, click
Add access permissions.
2. From the Add Access Permissions pop-up window, select a Share or Shares for the user or group
to access. Select the checkbox in the title bar to select all the Shares listed.
3. Click Apply to save your changes.
4. In the table listing the Shares, check Read or Write for each Share. A user or group can have full
access by checking both Read and Write. To grant only read access, check only Read.
A user or group must have read access at a minimum. A user or group cannot have only write
access.
5. Uncheck Read to remove all access to a Share and remove the Share from the table.
6. Click Apply to save your changes.
7. If NFS is enabled, the GID field is visible. The GID value must be the same on both the Linux client
and the px4-300r for the client to access files. To modify the GID, type a new GID value.
Setting Quotas
1.
Click
Quota settings to enable quotas and set a default quota. Quotas are only set for
individual users, and not groups.
2. In the Quota Settings dialog, click Enable quotas to turn on quotas for each user. Quotas can be
set for each user individually or set as a default value.
3. Enter a Default Quota in gigabytes. When you set a default quota, this becomes the quota size for
all new users.
4. Check Set default quota for all users to globally set the same quota size to all users. You may
overwrite this default value for individual users by setting their quota size separately in the user's
Information section.
5. Click Apply to save your changes.
Deleting Active Directory Users and Groups
To delete a user or a group:
1. From the px4-300r Management Console, click Users and Groups to open the Users & Groups
page.
2. To delete an existing user or group, click to expand that user or group.
3. In the Information section, click Delete. Deleting a user or group does not delete any Shares to
which the user or group has access. Click the checkbox if you want to Delete all Shares that
only this user can access.
4. In the confirmation pop-up window, click Yes.
5. If you do not wish to delete a user or group, click No to return to the Users & Groups page.
81
Using Active Directory Domain to Manage Users and Groups
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
Managing Your px4-300r Network Storage Array with
Local and Active Directory Users
Managing Your px4-300r Network Storage Array with Local and Active
Directory Users
You can configure your px4-300r Network Storage Array to allow both local users and groups and Active
Directory (AD) users and groups on the device simultaneously. While in AD mode, you can have existing
local users and groups and also create new ones. In addition, both AD and local administrator users can
log into and manage the px4-300r. This allows hybrid authentication on your px4-300r and, if desired, you
can switch between AD mode and Workgroup mode.
Enabling Active Directory after Creating Users in Workgroup Mode
After you create users in Workgroup mode, you can switch your px4-300r to AD mode.
1. On the Device Identification page, select Active Directory.
information.
3. Click Apply.
After changing to AD mode, you are required to log back in to the px4-300r. Your px4-300r is now
configured to allow both local administrators and AD administrators to log in.
Logging in to Your px4-300r
When an administrator logs in to the px4-300r, the admin chooses between the device name or the AD
domain name.
1. At the Login screen, choose what type of user is logging in from the Active Directory Domain drop-
down:
l
to log in as a local user, choose the device name from the drop-down menu and enter the
username and password
l
to log in as an Active Directory user, choose the Active Directory domain name from the drop-
down menu and enter the username and password
2. Click Login.
Managing Your px4-300r Network Storage Array with Local and Active Directory Users
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing Your px4-300r NetworkStorage Arrayand Contents
Creating Local Users and Groups in Active Directory Mode
After an AD or local administrator logs in to the px4-300r, that user can create additional local users and
groups on the px4-300r. The Users and Groups page lists all local and AD users and groups on the px4-
300r.
1.
On the Users and Groups page, click
Add users and groups...
2. In the Import Users and Groups from Active Directory page, under Local, click Users to create a
local user or Groups to create a group. You can add AD members to any local groups you create.
3. Enter the necessary credentials for the user or the group name, and click Create.
Creating Share Permissions for AD Users and Local Users
You can create access permissions for both AD and local users on any new or existing Shares on your
Switching to Workgroup Mode from Active Directory
You can switch your px4-300r from AD mode to Workgroup.
1. On the Device Identification page, select Workgroup.
2. Click Apply.
After changing to Workgroup mode, if there are any administrator users on your px4-300r, you are required
to log back in to the px4-300r. You must log in as a local user, and you do not have the choice to select an
AD domain. Also, the Users and Groups page no longer lists the AD users and groups.
If you had not enabled security on your px4-300r prior to changing from Workgroup to Active
Directory, your px4-300r did not have any local users. Security is automatically enabled when you
configure AD. When you switch back to Workgroup, the Switch to Workgroup Mode dialog box
displays. You must create an administrator user because security is not disabled by switching
back to Workgroup. After creating the admin user, you remain logged in to the px4-300r.
83
Managing Your px4-300r Network Storage Array with Local and Active Directory Users
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Access: Accessing Your px4-300r NetworkStorage ArrayFrom Anywhere in the World
Remote Access Overview
This section describes how to use TZO remote access to access your device's data from any web-
enabled computer in the world.
If TZO remote access was enabled when you upgraded your px4-300r to LifeLine version 4.0 or
higher, the feature will continue to function as it did before. Otherwise this feature no longer
appears. We recommend you use Personal Cloud for remote access. See LenovoeEMC Personal
Cloud for more information.
Review the following prerequisites prior to enabling remote access:
●
Enable Security — Before you can enable remote access, you must have security enabled on
your px4-300r Network Storage Array.
If security is already enabled, you are ready to enable remote access. If not, a pop-up window is
provided to enable security and create an administrator user to manage your secured px4-300r.
●
●
Check the internet connection — Your px4-300r requires internet connectivity.
Automatically configure the router — Prior to enabling remote access, ensure that your router is
UPnP enabled. If you have more than one router on your network, you must only have one router
used as a DHCP Server. Refer to your router documentation for more information. Your px4-300r
attempts to automatically configure your router. However, if it cannot, a warning displays, and you
must manually configure your router to forward a specific port to your px4-300r. Most routers refer
to this as port forwarding or application access, and it is recommended that you refer to your
router's documentation to learn how to set these values.
The following information is needed to manually configure your router:
○
○
○
○
Device IP Address
Port Name — HTTPS
Port Number — 443
Protocol — TCP
●
Choose a subscription service level — Basic or Premium.
○
Basic — Allows you to define a sub-domain name and choose from a list of domains (Domain
Name) to create your web address. A complimentary subscription period with TZO is
included with your purchase of your px4-300r. Once your complimentary subscription period
expires, you must renew your subscription with TZO to continue accessing your px4-300r
remotely.
○
Premium — Requires you to pay for your registration subscription by following a link before
you can complete the enabling remote access process. It allows you to define a top-level
domain name (Domain Name), or use one that you already own, such as yourname.com
●
Create a Web Address for your Device — You create a web address to access your px4-300r
by specifying a Domain Name.
85
Remote Access Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Access: Accessing Your px4-300r NetworkStorage ArrayFrom Anywhere in the World
Enabling Remote Access
Follow this procedure to enable remote access:
2. On the Remote Access page, click the switch to Enable.
Your px4-300r begins to automatically configure remote access. First, your internet connection is
tested. If the connection is successful, a green checkmark displays on the px4-300r image. If
there is a problem, an error message displays. After resolving the error, you can click the provided
link to retest the connection.
If the configuration is successful, a green checkmark displays on the image of your router.
See "Remote Access Overview " on page 85 for information on manually configuring your router if
your router cannot be automatically configured.
3. Once the router is configured, click Register with TZO to choose a subscription level (basic or
premium) and follow the associated procedure below to complete the enabling remote access
process.
See "Remote Access Overview " on page 85 for more information on the subscription levels.
Basic Option: Completing the Enable Remote Access Process
1. The registration fields display. Enter the following information in the pop-up window to create a
web address for your px4-300r and define an email address:
○
○
Sub-domain Name — Enter a unique sub-domain name in the first text box.
Domain Name — Select a domain name from the drop-down list. It is recommended that you
choose a domain name that you can easily remember and will help you identify your px4-300r.
The web address is created by combining the sub-domain and domain name. This will
ultimately be the address that will be registered and you can use to access your px4-300r
remotely.
○
Email Address — The email address will be registered with TZO to notify you about domain
name renewals.
2. Click Apply to save your settings.
If the domain name you selected is already in use, you will need to define a new one and click
Apply again.
If your registration is successful, the pop-up window closes, and the Remote Access page provides your
account information under the TZO logo.
Premium Option: Completing the Enable Remote Access Process
1. The registration fields display. Enter the following information in the pop-up window to create a
web address for your px4-300r and define an email address:
○
Domain Name — Enter a domain name. It is recommended that you choose a domain name
that you can easily remember and will help you identify your px4-300r.
This will ultimately be the address that will be registered and you can use to access your px4-
300r remotely.
Enabling Remote Access
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Access: Accessing Your px4-300r NetworkStorage ArrayFrom Anywhere in the World
○
Email Address — Enter a valid email address. The email address will be registered with the
DDNS server to notify you about domain name renewals.
2. Click Apply to register your domain name.
If the domain name you selected is already in use, you will need to define a new one and click
Apply again.
3. If your domain name is valid, a new browser window opens and you will be redirected to the TZO
site where you can register your web address and purchase your registration at special rates.
The Remote Access page provides your account information under the TZO logo.
87
Enabling Remote Access
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Access: Accessing Your px4-300r NetworkStorage ArrayFrom Anywhere in the World
Accessing Your px4-300r Network Storage Array
Remotely
Once you have enabled remote access and created your web address, you can access files stored on your
px4-300r Network Storage Array from any internet-capable computer in the world.
When you access your px4-300r remotely, you can access files from any Share to which you are granted
access. However, accessing your px4-300r from a remote location will not provide all the same
functionality provided by a computer in your local network.
The following procedure describes how to access your px4-300r remotely.
Open a web browser and type your px4-300r unique web address, which can be found on the Remote
Access page. The Home page of the px4-300r displays. Administrator users can log in. Non-administrator
users can access only the content available from the Home page.
Accessing Your px4-300r Network Storage Array Remotely
88
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
What Is LenovoEMC Personal Cloud ?
LenovoEMC Personal Cloud turns your px4-300r Network Storage Array into a hub for sharing files and
backing up data among computers anywhere in the world. A Personal Cloud can exist on your px4-300r
Network Storage Array, or on another LenovoEMC network device. When you create a Personal Cloud,
you gain access to your px4-300r from anywhere on the internet. You can also share with friends and
family by inviting users to join your Personal Cloud. You manage Personal Cloud users the same way you
manage other users on your px4-300r, so you control the storage and content they can access through the
Personal Cloud. Trusted devices can be added to your Personal Cloud to connect them through the
internet as if they are on a common home network with your px4-300r. People who join your Personal
Cloud can access data, perform Copy Job operations, stream media from your px4-300r over the internet,
and use remote desktop to access computers on the local network for your px4-300r. If you allow a user to
join their trusted devices to the Cloud, those devices become part of the Cloud and can be accessed by
other users on the Cloud.
LenovoEMC Personal Cloud Key Terms
The following are a few key terms to help get you started with a Personal Cloud:
●
LenovoEMC Personal Cloud— This is a setting configured on your px4-300r Management
Console that allows you to securely share storage and media capabilities with computers around
the world.
●
Web Access — You can use Personal Cloud information to access your px4-300r from the web.
Enter myCloudName.mylenovoemc.com in a web browser, and when prompted, enter a valid
username and password for your px4-300r. You can also use the LenovoEMC Link, which is an
application that runs on mobile devices, by entering the Personal Cloud name and then a valid
username and password. For more information on the LenovoEMC Link, refer to its
documentation.
●
My Personal Cloud — When you are the administrator of your px4-300r, you can create a
Personal Cloud through the px4-300r Management Console and then invite people to join it. You
create and manage the Personal Cloud on your px4-300r Management Console through the My
Personal Cloud configuration option. The Personal Cloud that you administer is called My
Personal Cloud.
●
●
Other Personal Cloud — If you want to have your px4-300r join that Personal Cloud instead of
administering your own, select the option for Other Personal Cloud. Enter the Personal Cloud
name, username and password you received when you were invited to join your px4-300r as a
Trusted Device on the other Personal Cloud.
Joining LenovoEMC Personal Cloud as a Trusted Device — To connect your computer or your
px4-300r as a trusted device to a Personal Cloud, you use the username and password given to
you for that Personal Cloud. The person managing the Personal Cloud has to create you as a user
on the device hosting the Personal Cloud and give you permission to add trusted devices. You
can connect your px4-300r to only one Personal Cloud at any given time, so you must select
between either My Personal Cloud or Other Personal Cloud.
An administrator should complete the following tasks to set up or join a Personal Cloud:
●
●
●
90
What Is LenovoEMC Personal Cloud ?
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Is My Content Secure?
Your content is always secure using LenovoEMC Personal Cloud. If you create a Personal Cloud with
security disabled, you are required to enter a password when accessing your px4-300r remotely. Enabling
security allows you to share your px4-300r with the people you choose. For example, you have photos of
your new baby you want to share with your sister, your brother, and your sister-in-law. To share your baby
photos with these family members, create a Personal Cloud, and then invite your sister, your brother, and
your sister-in-law to join your Personal Cloud. Your px4-300r Network Storage Array provides an easy way
to send email invitations and instructions to the people you select as Personal Cloud users. In this way,
your content is never exposed and remains private. It is visible only to the individuals you invite to be
Personal Cloud users. Content of the Personal Cloud is determined by you as the Personal Cloud owner.
Refer to the help topic links below for more information on Personal Cloud.
People added to your Personal Cloud as users are not required to own or have access to your px4-
300r. The process of adding someone as a Personal Cloud user grants them access to your
Personal Cloud from any computer.
Is My Content Secure?
91
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
LenovoEMC Personal Cloud Setup Overview
You can create LenovoEMC Personal Cloud in one of two ways:
●
●
Follow the LenovoEMC Personal Cloud setup through Setup Portal
Create the LenovoEMC Personal Cloud through the px4-300r Management Console
Creating a LenovoEMC Personal Cloud starts with providing a name for your Personal Cloud and an email
address associated with it. After creating the Personal Cloud, you can use the Personal Cloud Quick
Setup wizard to perform common tasks associated with the LenovoEMC Personal Cloud: adding Shares,
inviting people to join the Personal Cloud, and setting up Copy Jobs through the Personal Cloud.
92
LenovoEMC Personal Cloud Setup Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Creating LenovoEMC Personal Cloud
Before you can work with your LenovoEMC Personal Cloud, you first create a Personal Cloud and
configure the settings.
After your Personal Cloud is ready and connected to the internet as indicated by the status images, you
can invite people to join your Personal Cloud. When you invite people to join your Personal Cloud, you add
them as users on your px4-300r Network Storage Array. The invited users receive an email invitation that
includes the username and password they must provide when connecting to the Personal Cloud from the
LenovoEMC Storage Manager on their computer.
If you have content on your px4-300r that you do not want to share with members of your Personal Cloud,
you should put that content in secured Shares that are not accessible to anyone invited to your Personal
Cloud.
This procedure assumes you did not create a Personal Cloud using the initial LenovoEMC, Ltd.
Setup portal. If you have already created a Personal Cloud, you do not have to follow this
procedure.
1. On the LenovoEMC Personal Cloud page, expand the Configure section.
2. Click the My Personal Cloud button to open the portal that lets you create your Personal Cloud.
After you click the My Personal Cloud button, a new website containing the portal opens. You
create a Personal Cloud on this website. After you create the Personal Cloud, you return to the
px4-300r Management Console.
3. If your px4-300r is not secured, you are prompted to create a remote access password. This is a
password that anyone not on your local network must enter to access your device.
After completing these steps, the Personal Cloud Quick Setup Wizard opens, so you can create
begin using your Personal Cloud.
Creating LenovoEMC Personal Cloud
93
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Configuring Router Port Forwarding for Personal Cloud
In most cases, your px4-300r Network Storage Array attempts to automatically configure your router.
However, if it cannot, a message displays that your router is not configured for port forwarding, and you
must manually configure your router to forward a specific port to your px4-300r. Most routers refer to this as
port forwarding, application access, or virtual server. It is recommended that you refer to your router's
documentation for setting these values. When you set up port forwarding, you are allowing data to travel
through your Personal Cloud between your px4-300r and trusted devices.
When you have selected a port value to forward for Personal Cloud, click
Settings on the Personal
Cloud page, and enter your selected port number in the Personal Cloud settings dialog box. If you have
more than one Personal Cloud, you can enter a range of port values for your Personal Clouds. The range of
port values is 50500-50599. You must also port forward port 443 to enable https access to your px4-300r.
Router Port Forwarding
Some routers have a UPnP option. If you have a UPnP router, enabling this option allows the px4-300r
software to automatically configure the correct forwarding ports. Otherwise, you must perform additional
steps by manually enabling port forwarding on your home network router. Port forwarding allows invited
users to connect remote computers or other px4-300r devices outside of your local area network (LAN) as
trusted devices to the Personal Cloud on your network.
Port forwarding must be configured for both the network router on which the Personal Cloud is
configured, and any remote network from which trusted devices are accessing the Personal
Cloud.
The following steps are generic router settings. If you have never logged into your router before, you must
consult the manufacturer’s documentation to find specific details such as default IP address, default
administrator account, and password.
1. Log in to your router by entering its IP address in the browser’s URL field from your computer. If
prompted, enter administrator account name and password.
2. Navigate to the Port Forwarding configuration page. This is often related to Port Mapping,
Application, Virtual Server, or Gaming configuration options.
3. Type in the desired application or service name. This is typically a blank or drop-down field where
you can type or choose a user-specified application or service name for the port you are
forwarding. Create a new entry with a value like “LenovoEMC Personal Cloud ” in this field.
4. Enter a port number for the Personal Cloud service in the range 50500-50599 in both the port start
and port end fields. Port number 50500 is the default. It should not be necessary to change this
value, but if you do, choose the next available port; for example, 50501. If you decide to choose a
port in the higher range, note that the Media Server uses the same range of ports, numbering
backwards from 50599.
5. Repeat the previous step, using port 443 to enable https communication with your px4-300r.
6. Enter the IP address of your px4-300r which contains the Personal Cloud. The IP address
displays on the System Status page when you log into the device's web interface.
7. Save the changed settings.
8. Reboot the router if required.
94
Configuring Router Port Forwarding for Personal Cloud
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Configuring Your LenovoEMC Personal Cloud
As a LenovoEMC Personal Cloud administrator, you can manage various settings on your Personal Cloud
to ensure that it functions as efficiently as possible. Settings include specifying an email address when
sending invitations. When data is traveling through the Personal Cloud, you can control the security of that
information by specifying a Secure Communication level. Note that data stored on your px4-300r through
the Personal Cloud is not encrypted, and using encryption can slow down communications.
Enabling Internet Access to the px4-300r
You can grant internet users, including LenovoEMC Link users, secure access to the web interface and
unrestricted access to media content on your px4-300r. LenovoEMC Link is an application that runs on
mobile devices, and allows access to content on your px4-300r. Before enabling secure access, you must
first enable security on your px4-300r and create users. After enabling secure access, any internet users
can access your px4-300r, and view any unsecured content. Secure content is restricted to internet users
who have valid usernames and passwords for the px4-300r. When you enable unrestricted media content
access, your media files become available to all internet users.
Changing Personal Cloud Settings
1. In the Configure section of the Personal Cloud page, click Settings.
2. In the Personal Cloud Settings dialog box, configure the following:
●
●
Administration Email Address — This is the sender email address used on the email
invitations.
Port Number — Your router forwards this specific port for your Personal Cloud. This value is
automatically filled in, and you do not have to change it, unless you have more than one
Personal Cloud on your network. Refer to Configuring Router Port Forwarding for Personal
Cloud for more information.
●
Secure Communication — This setting controls the security of information traveling through
the Personal Cloud.
You can also specify a Secure Communication level setting with LenovoEMC Storage
Manager. The Secure Communication setting for the px4-300r Management Console sets the
minimum value. You cannot specify a setting lower than this value using LenovoEMC Storage
Manager. For information on using LenovoEMC Storage Manager, refer to its online help.
●
Enable unrestricted access to media content— This setting makes all media files in media-
enabled Shares available to anyone on the internet accessing your px4-300r, even if those
media files are in secured Shares. For more information on making a Share media-enabled,
3. Click Apply to save your changes.
Configuring Your LenovoEMC Personal Cloud
95
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Inviting People onto Your LenovoEMC Personal Cloud
When you invite people to join your LenovoEMC Personal Cloud, you are actually selecting from existing
users on your px4-300r, or adding people as users on your px4-300r . In addition, you are optionally
devices through LenovoEMC Storage Manager. Refer to its online help for more information.
1. From either the Personal Cloud Quick Setup dialog box or the LenovoEMC Personal Cloud page,
click Invite Users.
You can also send an invitation to join a Personal Cloud when you are adding users. Refer to
2. In the Invite Users dialog box, select the name of an existing user or click Create New User to
an administrator user.
3. If the email address field is not already completed, enter an email address for the user.
4. Click Apply to send the invitation.
96
Inviting People onto Your LenovoEMC Personal Cloud
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Joining a Trusted Device to LenovoEMC Personal Cloud
You can join your px4-300r Network Storage Array to the Personal Cloud as a trusted device if you have
been given permission by the person administering the Personal Cloud.
You cannot join your trusted device to a Personal Cloud if you have not been added as a user on
the Personal Cloud.
1. On the Personal Cloud page, select the Other Personal Cloud command to join another
LenovoEMC Personal Cloud.
2. In the Add Trusted Device to Personal Cloud dialog box, enter the Personal Cloud name,
username, and password you received in the email invitation.
3. Enter a descriptive name for your trusted device in the Description field.
4. Click Apply.
After applying this information, you are automatically connected to the Personal Cloud.
Joining a Trusted Device to LenovoEMC Personal Cloud
97
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Managing Trusted Devices on a Personal Cloud
As LenovoEMC Personal Cloudadministrator, you can manage trusted devices on your Personal Cloud.
Trusted devices can be disconnected, or you can completely delete a trusted device from the Personal
Cloud.
Disconnecting Trusted Devices
Click My Personal Cloud, and expand the trusted device section of the page.
To disconnect a trusted device from the Personal Cloud, disable the trusted device by clicking the switch
to Disabled, and click Yes in the confirmation pop-up window. The trusted device is not deleted and can be
reenabled at a later time.
Deleting Trusted Devices
To delete a trusted device from the Personal Cloud, click
next to the device's name. The trusted
device is deleted and can only be added again by a user with trusted device privileges.
1. On the Personal Cloud page, expand the Trusted Devices section.
2. Click
next to the trusted device you want to remove from the Personal Cloud.
3. Confirm the deletion.
98
Managing Trusted Devices on a Personal Cloud
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Using Copy Jobs with a LenovoEMC Personal Cloud
You can create Copy Jobs that can transfer data from one trusted device to another through the Personal
Cloud. When you add a trusted device to your Personal Cloud, a Copy Jobs icon displays next to that
device in the trusted device table. Clicking the Copy Jobs button opens the Copy Jobs page to help you
configure a Copy Job between the px4-300r Network Storage Array that is hosting the Personal Cloud and
Using Copy Jobs with a LenovoEMC Personal Cloud
99
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Disabling or Deleting Your LenovoEMC Personal Cloud
When you disable your Personal Cloud, you are eliminating access to your Personal Cloud without
deleting the account information you created when you set up the Personal Cloud. Later, if you want to
reenable your Personal Cloud, you can without reentering all the account information. To completely stop
the Personal Cloud and eliminate any account information with it, delete it. If you delete your Personal
Cloud and later decide you want to recreate it, you must start the creation process again and re-invite all
users. When you delete a Personal Cloud, you lose your ownership of its name.
To disable a Personal Cloud, click Disable.
To delete a Personal Cloud, click Settings and then click Delete in the Personal Cloud Settings dialog
box.
100
Disabling or Deleting Your LenovoEMC Personal Cloud
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Accessing Content Using Your LenovoEMC Personal
Cloud
You can share content by inviting users to your Personal Cloud. The data in Shares can be made
accessible to all users of the Cloud, or access can be restricted to a specific set of users by setting
access permissions to Shares. Access permissions control whether users are only allowed to read files in
Shares, or if they can also write (upload) files to Shares.
Accessing Content Using Your LenovoEMC Personal Cloud 101
Download from Www.Somanuals.com. All Manuals Search And Download.
PersonalCloud: Accessing Your LenovoEMC PersonalCloud From Anywhere in the World
Informing Users What to Do with LenovoEMC Personal
Cloud
Personal Cloud enables users to access your px4-300r from the web. They can enter
myCloudName.mylenovoemc.com in a web browser, and when prompted, enter a valid username and
password for your px4-300r. After they access your px4-300r Network Storage Array, they can view
Shares, upload and download content, and stream content. Optionally, they can install LenovoEMC
Storage Manager on their computers, and then join their computers as trusted devices to the Personal
Cloud. When users join their computer as a trusted device to the Personal Cloud, they are making their
machine and its files available to other users of the Personal Cloud. A large virtual network is created.
102
Informing Users What to Do with LenovoEMC Personal Cloud
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Content Using SocialMedia
Sharing Content Using Social Media: Overview
If you have an account with social media services such as Facebook, Flickr, or YouTube, you can share
content on your px4-300r Network Storage Array with your friends and family using one or more of these
social media sites. To share your content using social media sites, create Shares called Active Folders,
and connect each Active Folder with a social media account. Refer to the help topic links below for more
information on these procedures. When you add photos and movies to an Active Folder, those files are
automatically uploaded to the social media site associated with that Active Folder. If you have photos or
movies you want to share with others, this is a great way to make your content available to people who
may not have access to your px4-300r.
If you have configured a Personal Cloud on your px4-300r, you can grant Personal Cloud users access to
Shares and Active Folders. This is useful if you want to allow users to add files to your social media sites.
For example, if your px4-300r has a Flickr Active Folder, you can grant Personal Cloud users access to
that Active Folder. In this manner, when photos are added to the Flickr Active Folder, either by you or by
Personal Cloud users, those photos are uploaded automatically to your Flickr account.
Note that an Active Folder can only be associated with one social media account. For example, if you want
Active Folders for your Facebook and YouTube accounts, create two Active Folders, and assign one
Active Folder to Facebook, and one to YouTube. Using this example, any photos you add to your
Facebook Active Folder are automatically uploaded to your Facebook page, and any movies you add to
your YouTube Active Folder are automatically uploaded to your YouTube page. Not only is this a fast and
easy way to share content, but uploading content to your social media sites provides an additional backup
of your content, as the content is stored both on your px4-300r and at your social media accounts.
104
Sharing Content Using Social Media: Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Content Using SocialMedia
Facebook
Facebook is a social network to connect with friends and family. You can configure a Share as a Facebook
Active Folder so that photos and movies added to that Share are automatically uploaded to your Facebook
account.
If you do not have a Facebook account, go to the Facebook website to open an account.
Configuring a Facebook Active Folder
1. From the px4-300r Management Console, click Shares.
2. Select a Share to use as a Facebook Active Folder, and click to expand the Active Folder section.
3. Check Enable.
4. Select Facebook from the drop-down menu.
5. Click Configure Facebook account access to configure your Facebook account. You will be
taken to a Facebook page to configure your account. Follow the instructions provided by
Facebook.
6. Check Delete files after upload to delete images or movies from the Share once they are
transferred to your Facebook account.
7. Images can also be resized prior to upload. Check 800x600, 1024x768, or enter a custom
resolution for resizing images.
8. Click Apply to save your changes.
Once configured, all your images in this Active Folder will upload to your Facebook account.
9. Click View Transfer History to see the transfer activity from this Share to your account.
Facebook 105
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Content Using SocialMedia
Flickr
Flickr is a photo sharing network for sharing photos with friends and family. You can configure a Share as a
Flickr Active Folder so that images and albums added to that Share are automatically uploaded to your
Flickr account.
If you do not have a Flickr account, go to the Flickr website to open an account.
Configuring a Flickr Active Folder
1. From the px4-300r Management Console, click Shares.
2. Select a Share to use as a Flickr Active Folder, and click to expand the Active Folder section.
3. Check Enable.
4. Select Flickr from the drop-down menu.
5. Click Configure Flickr account access to configure your Flickr account. You are taken to a
Flickr page to configure your account. Follow the instructions provided by Flickr.
6. Check Delete files after upload to delete images from the Share once they are transferred to
your Flickr account.
7. Click Apply to save your changes.
8. Once configured, all images added to this Active Folder are uploaded to your Flickr account. Click
View Transfer History to see the transfer activity from this Share to your account.
106
Flickr
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Content Using SocialMedia
YouTube
YouTube is a social media site to share video content. You can configure a Share as a YouTube Active
Folder so that videos added to that Share are automatically uploaded to your YouTube account.
If you do not have a YouTube account, go to the YouTube website to open an account.
Configuring a YouTube Active Folder
From the px4-300r Management Console, click Shares.
1. Select a Share to use as a YouTube Active Folder, and click to expand the Active Folder section.
2. Check Enable.
3. Select YouTube from the drop-down menu.
4. Check Delete files after upload to delete videos from the Share once they are transferred to your
YouTube account.
5. Click Apply to save your changes.
Once configured, all videos added to this Active Folder automatically upload to your YouTube
account.
6. Click View Transfer History to see the transfer activity from this Share to your account.
YouTube 107
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Media Management Overview
The px4-300r has a built-in media server that, when turned on, scans for media content in specific Shares
that have media sharing enabled. Any media content contained in these specific Shares are accessible to
any user on your network with a media player, even if the Share is secured. For information on enabling a
Scanning for media content
The Media Server automatically scans for media content on a regular basis. However, you can click Scan
now at any time to force the media server to perform an immediate scan for media content. This is
especially useful after you have created new folders with media sharing enabled and copied a large amount
of media content to them.
110
Media Management Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Media Services Capabilities and Limitations
One important consideration when using the media server is that it can share media content on your px4-
300r with anyone on the internet. When media sharing is enabled, internet users, including those users on
mobile devices running the LenovoEMC Link, can access media content on your px4-300r.
When you enable internet access to your media content, all media content is available to any user
on the internet, regardless of any security you may have applied to a media file. All your pictures,
movies, and music are available to anyone accessing your px4-300r. You should be sure you
want to make all your media content this accessible.
Media Services Capabilities and Limitations 111
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Sharing Media Content over the Internet
There are two methods for sharing media content on your px4-300r with anyone on the internet. You can
enable internet access on the Media Server page. Alternatively, you can enable internet access by
Enabling Internet Access from the Media Server Page
You can only enable internet access from the Media Server page if you have already created and
configured a Personal Cloud. If a Personal Cloud is not set up, you do not see the Enable internet
access option.
1. On the Media Server page, click
Settings.
2. In the dialog box, check Enable internet access.
3. Click Apply to save your changes.
4. In the confirmation dialog box, check Check this box to continue.
5. Click OK to save your selection or click Cancel.
To access media content, internet users enter a non-secure IP address in their browser along with the port
number 50599 used to access the media server, for example, http://72.xx.xxx.104:50599, where "x" is the
IP value for your network. When a user enters this IP address, the Twonky Server page on the px4-300r
displays. Refer to the Support section of the Twonky Server page for information on using the server.
LenovoEMC Link users can access media content directly from the px4-300r. Refer to your LenovoEMC
Link documentation for details.
For additional information on enabling internet access, refer to Media Services Capabilities and
112
Sharing Media Content over the Internet
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Media Aggregation
If you have multiple Digital Living Network Alliance (DLNA) servers in your network that have media
content, you can combine all media content into one view by enabling aggregation on your px4-300r. When
you enable aggregation, all media content on DLNA servers is available for playback using a DLNA player,
such as Playstation®3, Windows Media Player®, or Xbox 360®. In addition, you can optionally copy all
media content from your network servers to your px4-300r.
Enabling Media Aggregation
1. On the Media Server page, click
Settings.
2. Check Enable media aggregation.
This enables aggregation for media servers already discovered in your network.
3. Choose the default aggregation setting.
The default aggregation setting sets the default value for media servers as they are added to your
network.
The default aggregation settings are as follows:
●
●
None — Media aggregation is off.
Show Common View — This enables media aggregation and allows all media content from
computers on the network to be played back by a DLNA player. All your movies, music, and
pictures are linked from various computers and can be played back from one view. All aggregated
media files remain on their original device, and can only be played while that device is powered on
and connected to the network.
●
●
Copy Files — This enables media aggregation and automatically copies all media content from
computers, both networked and local, to your px4-300r. All your movies, music, and pictures from
various computers can be played back from one view, and they are copied into Shares on your
px4-300r. Because all media files are copied to the px4-300r, they can be played even if the
original device they were on is powered off or not connected to the network.
Copy on Request — This enables media aggregation but does not automatically copy all media
content from computers, both networked and local, to your px4-300r. Computers on the network
will have to enable media aggregation individually and then media files are copied to the px4-300r.
If a computer is running the LenovoEMC Storage Manager, media aggregation is automatically
enabled.
When you enable media aggregation, the media server restarts, and any media you are currently
streaming stops playing. You can begin streaming your media after the media server has
restarted.
Media Aggregation 113
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Streaming Music, Movies, and Pictures
The Media Server supports playback of videos, music and pictures from any UPnP AV (Universal Plug
and Play Audio Visual) network media players, such as Playstation3, Windows Media Player, or Xbox
360.
You can play back all your media files from your individual home computers by enabling media aggregation
on your px4-300r. You can also connect USB mass storage devices (such as your iPod, mp3 player, or
USB drive) to your px4-300r and directly stream files through the device, or access media files through a
networked media player. Below are two examples of how to set up the following media players:
●
●
The procedures shown below are intended as examples. Your media player or version may
operate differently. It is recommended that you refer to your media player documentation for
instructions on how to add a network device.
Example: Setting up iTunes
1. Locate the source directory of your iTunes media content.
2. Drag, or copy, your existing media content to a Share that has media sharing enabled.
3. When you open the iTunes Library, iTunes will display all of the media content from the px4-300r.
Example: Setting up Xbox 360
1. Connect your Xbox 360 to your TV and to the same local network as your px4-300r.
2. Navigate to the Media Tab in Xbox 360 and select a media-enabled Share.
3. Select Computer from the options menu.
4. Click Yes, Continue when asked if you have downloaded and installed media sharing software
on your computer, since the px4-300r device comes preconfigured with this software.
5. Select px4-300r from the list of names. You should now see all the unsecured media content on
your device.
Streaming Music, Movies, and Pictures 115
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Photos
Photos Overview
Your px4-300r has multiple ways to manage your pictures.
Your px4-300r can:
●
●
●
●
●
Stream pictures that are in Shares with media sharing enabled
Display pictures on the Home Page in a slideshow
Automatically resize pictures
Transfer pictures from your digital camera
Upload pictures to social media sites like Flickr or Facebook
Streaming Pictures
The px4-300rhas a built-in media server that, when turned on, can scan for pictures in specific folders that
have media sharing enabled. Any pictures contained in these specific folders will then be accessible to any
user on your network with a media player. For information on enabling a folder as a media folder, refer to
Scanning for Pictures
The Media Server automatically scans for media content on a regular basis. However, you can click Scan
now at any time to force the media server to perform an immediate scan for pictures. This is especially
useful after you have created new folders with media sharing enabled and copied a large amount of media
content to them.
Creating a Slideshow on the Device Home Page
Your px4-300r can display a slideshow on its home page.
On the Home Page Settings feature page, check Display slideshows to display picture slideshows from
folders on the px4-300r. Click Manage slideshows to configure any slideshows you want to display. The
slideshow location can be any folder attached to the px4-300r, including a USB drive or DFS location.
Automatically Resizing Your Photos
A Photo Resize Active Folder automatically changes the size of photos in that Share to a set size. You
can choose to keep the original photos added to this Share, while a resized copy is created. The resized
photos are saved to a folder on the Share named by the photo size you choose, such as 800x600. To
configure a Share as a Photo Resize Active Folder, access Shares from the px4-300r Management
Console, select a Share, and expand the Active Folders section to enable and configure it.
Configuring a Photo Resize Active Folder
1. From the px4-300r Management Console, click Shares.
2. Select a Share to use as a Photo Resize Active Folder, and click to expand the Active Folder
section.
3. Check Enable.
116
Photos
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
4. Select Photo Resize from the drop-down menu.
5. You can set a size for your pictures. Select 640x480, 800x600, 1024x768, or enter a Custom
Resolution for resizing images. The resized photos are saved to a folder on the Share named by
the photo size you choose, such as 800x600.
6. You can keep a copy of the original by selecting Keep the original files after resizing.
7. To add a watermark to your photo, select Add a watermark to the photos. Click the Watermark
file icon to apply a watermark image to your file.
8. Click Apply to save your changes.
9. Once configured, all photos added to this Active Folder are resized to your settings. Click View
Content to see the files in this Share.
Getting Pictures from Your Camera
The Picture Transfer Protocol (PTP) allows pictures to be automatically copied from a USB camera
connected directly to the px4-300r. When Picture Transfer is turned on, and your camera is connected to
your px4-300r, the pictures are copied to the configured destination folder.
1. Open the Picture Transfer page, click the switch on.
2. Optionally, if you want to automatically delete the pictures from your camera once they have been
safely copied to your LenovoEMC storage device, check Remove Copied Pictures From
Camera to automatically delete the pictures from your camera once they have been safely copied
to your px4-300r.
3. Click
to open the Select Folder pop-up window, and select a Share as the destination for
your pictures.
Getting Pictures from Your Camera
The Picture Transfer Protocol (PTP) allows pictures to be automatically copied from a USB camera
connected directly to the px4-300r. When Picture Transfer is turned on, and your camera is connected to
your px4-300r, the pictures are copied to the configured destination folder.
1. Open the Picture Transfer page, click the switch on.
2. Optionally, if you want to automatically delete the pictures from your camera once they have been
safely copied to your LenovoEMC storage device, check Remove Copied Pictures From
Camera to automatically delete the pictures from your camera once they have been safely copied
to your px4-300r.
3. Click
to open the Select Folder pop-up window, and select a Share as the destination for
your pictures.
Photos 117
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Music
Music Overview
If you have music files in media-sharing enabled folders on your px4-300r, those music files can be
streamed by a DLNA player running on a computer on the network.
Streaming Music
The px4-300r has a built-in media server that, when turned on, scans for music in specific folders that have
media sharing enabled. Any music contained in these specific folders is then accessible to any user on
your network with a media player. For information on enabling a folder as a media folder, refer to Managing
Scanning for Music
The Media Server automatically scans for media content on a regular basis. However, you can click Scan
now at any time to force the media server to perform an immediate scan for media content. This is
especially useful after you have created new folders with media sharing enabled and copied a large amount
of media content to them.
118
Music
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Torrents
Torrent Overview
Torrent downloads allow you to share files using a peer-to-peer file sharing protocol. With torrent download
enabled, you can download files using the torrent protocol to your px4-300rand then those files can be
uploaded by other torrent users.
After you have added torrent jobs to your torrent share, the torrent download page displays a table of torrent
jobs, showing both downloads and files available for upload. Multiple torrent files can download
simultaneously. The table information includes the name of the file, its size, download or upload status,
and amount of time remaining for the torrent job to complete.
Enabling Torrent Downloads
1. On the Torrent Download page, click the switch on.
2. Click
Settings to modify the torrent download and upload settings.
3. In the Torrent Download Settings dialog box, enter a value for Maximum Download Speed. This
sets the rate at which files are downloaded to your device. The maximum download speed you
can enter is 2 MB/s.
4. Enter a value for Maximum Upload Speed.
This sets the speed at which other users can upload a file unprompted from your device. The
upload speed can affect device performance, so it is recommended that you choose a value that
does not strain the performance of your device and impact other work on it. The maximum upload
speed you can enter is 1GB/s.
5. Set a Port value used by torrent peers to upload files from your px4-300r.
The port value should be a number between 6881 and 6999, and your router must be configured to
more information on how to do this.
6. Click Apply to save your changes.
Deleting torrent jobs
1. On the Torrent Download page, select a torrent you want to delete.
2. Click the
under the Action column to delete the torrent.
3. Click Yes to delete the torrent.
Configuring Your Router for Torrent Downloads
You must manually configure your router to forward a specific port to your px4-300r. Most routers refer to
this as port forwarding or application access, and it is recommended that you refer to your router's
documentation to learn how to set these values.
Port Information Used to Configure Your Router
The following information may be required to manually configure your router:
Forward the port to your px4-300r IP address identified in the table:
Torrents 119
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
●
●
●
●
Device IP Address
192.168.1.1
Port name
HTTP
Port number
Set to the same port value set on the Torrent Download page.
Protocol
TCP
Torrent Active Folders
Sharing Torrent Downloads with Other Peers
Torrent downloads allow you to share files using a peer-to-peer file sharing protocol. With Torrent
Download, you can download files using the torrent protocol to your px4-300r and then those files can be
uploaded by other torrent users.
Configuring a Torrent Active Folder
1. From the px4-300r Management Console, click Shares.
2. Select a Share to use as a Torrent Active Folder, and click to expand the Active Folder section.
3. Check Enable.
4. Select Torrent from the drop-down menu.
on previous page for more information on configuring your Torrent downloads.
6. Click Apply to save your changes.
7. Click View Content to see the files in this Share.
Adding Torrent Files to Your px4-300r
1. Open the Shares page.
2. Expand the Share that is enabled as a Torrent Active Folder. Any Share can be enabled as a
Torrent Active Folder. For information on enabling a Torrent Active Folder, refer to Configuring a
3. Copy the downloaded torrent file to the Torrent Active Folder Share. The torrent file immediately
starts to download to the Share. An administrator user can monitor its download progress on the
on the Torrent Share.
Managing Torrent Downloads
In the Content Viewer, you can perform the following actions on torrents:
●
Pause or resume a torrent job. Click
to pause a torrent download. When a torrent download
is paused, you can resume the download by clicking
.
120
Torrents
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
●
Delete a torrent job. Click
to delete the torrent download.
Torrents 121
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Videos
Video Capabilities Overview
Your px4-300r Network Storage Array has multiple ways to manage your videos.
Your px4-300r can:
●
●
Stream movies that are in Shares with media sharing enabled
Upload videos that are added to Shares associated with social media sites
Streaming Movies
The px4-300r Network Storage Array has a built-in media server that, when turned on, scans for movies in
specific folders that have media sharing enabled. Any movies contained in these specific folders are
accessible to any user on your network with a media player. For information on enabling a folder as a
Scanning for Movies
The Media Server automatically scans for media content on a regular basis. However, you can click Scan
now at any time to force the media server to perform an immediate scan for movies. This is especially
useful after you have created new folders with media sharing enabled and copied a large amount of media
content to them.
Video Surveillance
Video Surveillance Overview
The Video Surveillance page lets you add and configure cameras connected to your px4-300r Network
Storage Array, view live video, and see video alerts. The page has three primary links:
●
●
●
Add Video Camera — Manually adds a video camera to your px4-300r if it is not automatically
Video Wall — Displays live video from all video cameras configured with your px4-300r. The video
from all cameras is displayed in a grid.
Alerts — Displays alert messages about the video surveillance feature. Refer to the camera
configuration pages for camera status information.
Video Surveillance features
The Video Surveillance page displays the Name, Space, and Model information of each video camera
connected to the px4-300r, along with Action controls for each video camera. Administrators have access
to modify these settings.
When no supported cameras are connected to your network, this page will be empty.
122
Videos
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Name
This section displays the video camera's IP address, name, login username, and the destination folder for
the video recording files. Additionally, using the Camera Configuration link, you can modify the video
camera software configuration settings using the video camera's native software. It also displays an icon
that indicates the current state of the video camera. The possible states are:
The video camera is no longer connected to the network.
The video camera is no longer connected to the network, but a recording schedule is set for it. You
should delete this video camera if it is no longer on the network, or fix the network connection so it
can record as scheduled.
The video camera is connected to the network and is currently recording. There is no schedule for
this recording, since it was started manually. The recording must therefore be stopped manually.
The video camera is connected to the network, a recording schedule is set, and the camera is
currently recording.
The video camera is connected to the network and a recording schedule is set for it, but it is not
currently recording.
The video camera is connected to the network, but no recording schedule is set.
Space
The Space column identifies how much disk space is currently used by the video files in the destination
folder for this video camera.
Model
This column lists the model information for this video camera.
Action
For each video camera, you can perform the following actions:
●
●
Click either
to manually start recording or
to stop recording. These buttons are
available only for video cameras that are currently connected and accessible on the network. Use
the manual start and stop record buttons to start recording at any point and to stop a recording
until the next scheduled start time.
NOTE: During recording, if you want to change the camera resolution and frame rate, you must
stop recording, change the values on the camera's configuration page, and then start the
recording again.
Click
to open a live view from your video camera. You may be prompted to supply the
username and password for the video camera.
Adding a Video Camera
You can use the Video Surveillance page to manually add supported video cameras if they are not
discovered automatically on your px4-300r. The Video Surveillance page also displays the current settings
for any video camera attached to your network. For example, you might have video cameras on a summer
house in one geographic location, while your px4-300r is in another geographic location.
If your video camera is already listed, you can modify its settings. To manually add a video camera,
reference the instructions below.
Videos 123
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Manually Adding a Video Camera
Follow the instructions below to add your video camera, set a retention policy for your saved recordings,
and schedule your video surveillance recordings.
1. On the Video Surveillance page, click Add Video Camera.
2. In the Video Camera Information section, enter the following about your video camera:
If your video camera is automatically discovered, information like Name and Manufacturer are
already filled in for that video camera. These settings can be modified. If you modify these
settings, you must make the same changes to the associated settings on your camera's
configuration page.
●
●
●
●
Name
Camera Login Password
IP Address
HTTP Port: A camera that is automatically discovered will periodically receive configuration
values, including the HTTP port number, from the actual camera. If you change the HTTP port
number on a camera's configuration page, but do not change it on the Video Surveillance page,
that camera will be offline on the Video Surveillance page until the camera receives the
updated value. If you manually add a camera and change its HTTP port number on the
camera's configuration page, the camera displays as offline on the Video Surveillance page.
Delete the camera and add it again, using the updated HTTP port value.
●
RTSP Port
3. Select a Destination Folder for the video camera recordings.
Recorded video files are saved to this folder, and the px4-300r automatically organizes your
saved video recordings into folders by video camera name. Within each video camera folder are
sub-folders that organize the recordings by date. For example, if you set the destination Share to
Media/Videos and the name of your camera is HomeDoor, a recording made on July 17, 2012, can
be found at Media/Videos/HomeDoor/20120717.
4. Click Camera Configuration to link your video camera's software.
If you want to change the camera resolution and frame rate, you must change them on your
camera's configuration page.
5. Click Apply to save your changes. Click Cancel to discard your unchanged settings.
The video camera displays in the table. For additional setup, refer to the sections on Retention Policy and
Managing Video Cameras
You can set a retention policy on your recordings and also schedule when to record.
Setting a Retention Policy
Setting the retention policy determines how much recorded video you keep on your px4-300r Network
Storage Array. Retention is set one of two ways:
●
●
Maximum days to save recordings
Maximum space for recordings
124
Videos
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Management
Click Apply to save your changes.
If you select Maximum days to save recordings, enter a value in days. If you select Maximum space
for recordings, enter a value in gigabytes. Setting this value too high may consume all available space,
while setting this value too low may cause recordings to be deleted sooner than you would like. The
maximum space cannot exceed 90% of the total space on the px4-300r.
Scheduling the Recordings
Schedule the days and time periods you want your video camera to record.
1. Select Schedule Recording to enable the recording scheduler.
2. Select the days you want to record, or All Days for the entire week.
3. Choose the Start and Stop times for your recording.
4. Click Apply to save your changes.
Once your video camera is set, click
in the Action column to begin recording. To stop recording, click
. For a live view from your video camera, click
camera is not recording.
. The live view displays even when the video
Deleting Video Cameras
To delete a video camera, expand the Information section of the camera and click Delete.
Videos 125
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Applicationsto Your px4-300r NetworkStorage Array
Application Overview
You can install supported applications on your px4-300r using the Application Manager page. For each
application installed you may have the option to uninstall, start, and stop the application.
127
Application Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Applicationsto Your px4-300r NetworkStorage Array
Application Installation
Certain applications on your px4-300r must be installed before you can use them. When you click on an
uninstalled application in the px4-300r Management Console, you open the feature page of the application.
To install the application, click the install link. The application is downloaded to the px4-300r, and you can
start the application from the Application Manager page.
You can also download applications from www.LifeLineApps.com.
Application Installation 128
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Applicationsto Your px4-300r NetworkStorage Array
Application Manager
The Application Manager page allows you to add applications to your px4-300r from an installation file
located on your computer. For each application installed you may have the option to uninstall, start, and
stop the application. This page shows the applications which came preinstalled with your px4-300r; as well
as applications that you have manually installed.
Only valid applications built using the LenovoEMC SDK can be installed on your px4-300r.
Starting or stopping an application
When available, click
in the Action column to stop an application. Click
to start it again.
Adding applications
1. Click the Add application link. The Add application window displays.
2. Enter the path and name of the application file, or click Browse, and select the application file
located on your computer.
3. Click Upload to install the application.
Removing applications
When available, click
in the Action column to uninstall an application.
129
Application Manager
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your px4-300r NetworkStorage Array
Software Updates
The Software Updates page identifies the px4-300r software status and provides the ability to update the
software for the px4-300r.
Auto-update process: installing a device software update
1. In the table listing the current software installed on your px4-300r, click
to check for updates.
in the Action column
2. The Status column will state whether the software is up to date or if an update is available. To
copy an update file to your px4-300r, click
to your px4-300r.
. The software update file is downloaded directly
3. If multiple updates are ready, you may install all the updates at the same time. Click
Apply
all pending updates to install the available updates. The software updates are applied to your
px4-300r.
4. Once the software is installed, the px4-300r will reboot. If you are applying multiple updates, you
only need to reboot once. Do not power down the px4-300r during this time.
5. If you want to remove the update without applying changes, click
in the Action column.
Do not shut down the px4-300r during the update process as this can damage the px4-300r. The
px4-300r will be temporarily inaccessible during the software update. Be sure no critical files are
being accessed.
Manual update process: installing a device software update
1. In the table listing the current software installed on your px4-300r, click
to check for updates.
in the Action column
2. If an update is available, the Status column will state that a software update is available with a
link. Download the update file to your local computer.
3. To retrieve the update, click
Add Software.
4. In the Add Software pop-up window, if an update is available, there will be a link to download the
appropriate update for your px4-300r. Click the link, follow the instructions on the download site
page, and download the software update to your local computer.
Once downloaded, click Browse to select the update, and then click Upload to continue.
5. When the update is uploaded to the px4-300r, the Status column will say Ready to apply.
6. Click
Apply all pending updates to apply the update or updates. The software updates will
be applied to your px4-300r. If you want to remove the update without applying changes, click
in the Action column.
The px4-300r restarts once the software is installed. You should not power down the px4-300r
during the installation process as this can damage the px4-300r. If multiple updates are ready, all
of them will be applied, requiring only one reboot.
131
Software Updates
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your px4-300r NetworkStorage Array
The px4-300r will be temporarily inaccessible during the software update. Be sure no critical files
are being accessed.
Software Updates 132
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up and Recovering Your px4-300r NetworkStorage ArraySettings
Backing Up Your px4-300r Network Storage Array Settings
The Configuration Backup and Restore page allows you to back up and restore system configuration
information. Backing up a configuration saves various system properties, including users, groups, device
identification, and Share names and permissions. Configuration information is saved to a file, and you can
save as many versions of the file as you want. After backing up the configuration, you can restore it to your
px4-300r at any time. You can also apply the configuration backup to other px4-300r devices, effectively
using the configuration as a template.
Configuration Backup and Restore does not back up or restore any data files on your px4-300r.
Backing up Device Configuration
1. On the Configuration Backup and Restore page, click
name and location for your configuration backup.
Back up configuration to select a
2. Save the configuration file to an external device, such as your computer or a USB drive. You can
save as many configuration backups as you want.
Restoring a Configuration Backup
1. On the Configuration Backup and Restore page, click
saved configuration backup.
Restore configuration to select a
2. In the Restore Configuration dialog box, click Browse to locate a previously saved configuration
backup stored on your computer or USB device.
3. Select one of the following options:
●
Restore settings — overwrites any existing settings, such as device identification and Share
names. When you select this option, existing data on the px4-300r is not deleted, and the
configuration restore operation starts automatically after you click Apply in the Restore
Configuration dialog box.
●
Restore settings and drive configuration — deletes all data, users, and settings from the
target px4-300r. If you select this option, a confirmation dialog box displays and informs you
that restoring the configuration will delete all data and overwrite any existing users or settings
on the target px4-300r. Check Check this box to continue to confirm this dialog box or click
Cancel to stop the configuration restore process.
4. Click Apply to save your changes. After you click Apply, the restore process starts.
5. If your source px4-300r had Active Directory enabled, you are prompted to enter the administrator
name and password of an account that has the rights to join the domain.
6. Click OK.
134
Backing Up Your px4-300r Network Storage Array Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Management
About the px4-300r Network Storage Array Components
This topic describes the front and rear panel components of the px4-300r.
Front Panel
Status Indicators, Buttons and Ports
1. Power Button and Indicator — Press and release to power the px4-300r on or off. The power button is
illuminated when the px4-300r is running.
Holding the power button for 4 seconds will result in a forced shutdown and could cause data loss
if data transfers are in process.
2. System Status Indicator — Displays the current operational status of the px4-300r Network Storage
Array.
The top LED light displays the current operational status of the px4-300r.
●
●
●
●
Off — Powered up and ready.
Flashing White — px4-300r is rebuilding the RAID array.
Flashing Red — System or drive error — LCD or system software indicates error.
Solid Red — System error during boot.
The bottom LED light displays the status of a QuikTransfer Copy Job.
Off: No QuikTransfer Copy Jobs are running or defined.
●
●
Solid Blue — Copy Jobs are configured — also applies to external USB drives that are plugged in
and have a Copy Job configured.
●
●
Flashing Blue — Data transfer in progress.
Pattern Flashing Blue — Indicates an error with the data transfer — LED or system software
indicates error.
136
About the px4-300r Network Storage Array Components
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Management
3. LCD Display — Scroll through the display screen to view the device name, free disk space, IP address,
and date and time. You can initiate a QuikTransfer Copy Job from the LCD and view or dismiss any errors
or warnings on the px4-300r without having to turn on your computer.
4. Select or Cancel Button — Push the Select or Cancel button to select a menu option on the LCD
display, or dismiss the current message.
5. Next Button — Push the Next button to scroll to the next px4-300r info screen.
6. Drive Activity Indicators — Displays the current status of drives in the px4-300r.
●
●
●
Solid Blue — Powered up and ready.
Flashing Blue: Data transfer in progress.
Pattern Flashing Blue: Data transfer in progress.
7. Drive Sled Release Latch — Press the release button and pull the latch to release the drive sled.
8. Reset Button — Hold the RESET button for four seconds to reset security and network settings. This
allows you to regain access if network settings are incorrect or you've forgotten your password.
9. USB Connector — Supports devices such as USB storage devices and printers.
Drive Bay Detail
Drive Bays — The px4-300r has four user-serviceable drive bays.
Rear Panel
1. Power Connector — Plug the power cable into this connector.
2. High-Speed USB 2.0 connectors — Supports devices such as USB storage devices and printers.
3. Gigabit Ethernet Ports — High-speed Ethernet connectors that automatically detect your network
speed (10/100/1000Base-T).
4. Serial Connector — The serial connector is used for troubleshooting only.
About the px4-300r Network Storage Array Components 137
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Management
Default Settings
IP Address — If no DHCP server is found on your network the px4-300r will get a self-assigned IP address
in the 169.254.x.x range.
Device Name — The default name for your px4-300r Network Storage Array is px4-300r. If there are more
than one px4-300r on your network, a number is added to the name, such as px4-300r-1 px4-300r-2, and so
on.
Default Shares — Backups, Documents
138
About the px4-300r Network Storage Array Components
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Management
Energy Saving
The Energy Saving page provides power settings for the px4-300r.
Power Down Drives
Click the Power Down Drives drop-down menu to select how much idle time should be allowed to elapse
before the px4-300r powers down the drives. Drives automatically power back up when the px4-300r
accesses them. You may notice a slight delay when the drives are accessed.
Brightness
To adjust the brightness of the lights on the px4-300r, set the Indicator Brightness to High, Medium, or
Low.
Wake On LAN
Wake On LAN powers on your px4-300r when a specific signal is sent over the network. Additional
software may be required to send the Wake On LAN signal to your device.
1. Check the Wake On LAN checkbox to enable Wake On LAN.
2. Click Apply to save your changes.
Creating A Power Schedule
You can create a power schedule to turn your px4-300r on and off. Power off and Power on functions can
be scheduled as one-time events, or recurring events. When you create a power schedule, you can set the
day and time to power down the device. In addition, you can optionally set power on times.
1. Check the Enable device power schedule checkbox.
2. Select the days for your px4-300r to power on or off.
3. Set the power schedule time in both hours and minutes (HH:MM), and specify AM or PM.
4. Click Apply to save your changes.
Energy Saving 139
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Management
Factory Reset
Factory Reset returns the px4-300r to its original state. This feature is useful if you give your px4-300r to
someone else.
Factory Reset provides two options for returning your px4-300r to its original state:
●
Quickly delete all data — permanently deletes all record of existing or deleted data, users, and
passwords.
●
Securely delete all data — this option takes significantly longer, but provides an added security
benefit by permanently erasing all data on the drives to prevent recovery of existing or deleted
data, users, and passwords. The secure delete operation renders all data irrecoverable.
You can use the factory reset feature only to erase the drives internal to the px4-300r. You cannot
use this feature to reset any external storage devices that may be connected.
1. Choose one of the following options:
●
●
Quickly delete all data
Securely delete all data
2. From the After Reset drop-down menu, choose to Restart or Power off the px4-300r after the
factory reset completes.
3. Click Apply.
4. In the pop-up confirmation, click Yes to perform the factory reset. After the factory reset
completes, the px4-300r powers down or restarts depending on your selection.
When you quickly delete or securely delete all data on your px4-300r, any installed applications,
download and reinstall your applications. In addition, you should visit the LenovoEMC support
web site for specific information on reinstalling applications that came preloaded with your px4-
300r.
140
Factory Reset
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Management
UPS Management
The LenovoEMC UPS Management page allows you to monitor the status of an attached Uninterruptible
Power Supply.
If your px4-300r is connected to a UPS battery backup unit, it is listed on this page. The battery status of
the backup unit is also indicated, displaying how much of a charge is left in the battery. To monitor the
battery status of your UPS unit, connect your px4-300r to it with a USB cable.
If the px4-300r is running from the UPS battery, it automatically shuts down to preserve data as the battery
charge gets low.
UPS Management 141
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Management
Troubleshooting Routers
If you encounter a problem while connecting or using your px4-300r, check the topics listed below for
possible solutions.
If you have properly set port forwarding on your router and remote access still does not work, you may
have multiple routers on your network. In this situation, you will most likely have two NAT (Network
Address Translation) firewalls.
1. One of the easiest ways to identify this issue is to log in to the router to which the px4-300r is
connected.
2. Once you have logged in, go to the page that shows the router's WAN IP address, usually Status
or Network Info.
3. If the WAN IP address begins with 192.168, 10, or 172, you may have a NAT Firewall between
the router and internet connection.
There are several options for resolving double NAT situations. The sections below explore the pros and
cons of each resolution:
These instructions will refer to the router that is connected directly to the internet as the Primary
Router. The cascaded router or router to which your px4-300r is connected is referred to as the
Secondary Router.
●
●
●
●
Use the primary router's DMZ
Port forward the primary router to the secondary router
Put the secondary router in bridging mode
Put the primary router in bridging mode
Enabling the DMZ
Most routers have a feature called DMZ or Default Server. DMZ stands for Demilitarized Zone, Data
Management Zone, Demarcation Done, or Perimeter Network. The DMZ allows you to enter an IP address
that will exist outside the router's NAT Firewall.
This is the easiest way to configure your network to handle double NAT situations; however, it is
dependent upon DMZ functionality within your primary router.
To enable the DMZ:
1. Log in to the primary router.
2. Navigate to the settings page for DMZ or Default Server. Refer to the documentation that came
with your router for information on where this feature is found.
3. Enter the secondary router's IP address.
4. Save your settings.
Your secondary router is no longer behind your primary router's firewall. If port forwarding is correctly
configured, remote access should now be working properly. Moving your secondary router into the DMZ
should not have any effect on the security of the network, since it is still protected by the secondary
router's firewall.
142
Troubleshooting Routers
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Management
Configuring Port Forwarding on Double NAT Networks
If for some reason the network configuration cannot be changed and your setup requires the double NAT,
you must perform the port forwarding steps twice. On the primary router, set the port forwarding to the
cascaded router's external IP address. On the cascaded router, set the port forwarding to the px4-300r's IP
address.
Bridging the Secondary Router
Make sure that the primary router (usually the one connected to or acting as the DSL/Cable modem) is the
only one with DHCP (Dynamic Host Configuration Protocol) and NAT (Network Address Translation)
enabled. The secondary should be changed to bridging mode. Ensure that the secondary router connects
to the primary router using a standard port rather than the port labeled Uplink or internet. This turns your
secondary router into a switch; however, you can still enable its Wireless Access Point if so equipped.
Refer to the documentation that came with your router for configuration information and settings.
Bridging the Primary Router
If none of the above options are available, you must enable transparent bridging on your primary router.
This may require contacting your ISP (Internet Service Provider) to configure the DSL or Cable
Modem/NAT into bridge mode, which then disables the first NAT/Firewall. After this first firewall in the
modem is disabled, the secondary router handles all the network traffic, Port Forwarding, and allows
Remote Access to work.
You should not attempt bridging without help from the ISP. If bridge mode is attempted by the
customer and not configured properly, it can render the customer's internet connection inoperable.
Primary router bridging may also require special configuration information and settings on the
secondary router.
If you configured your px4-300r using DHCP, you may not be able to reconnect to it via Remote Access
after a reboot. DHCP automatically receives an IP address from the server whenever the px4-300r
restarts. This is a very simple way to configure the px4-300r but can cause problems with your router's port
forwarding settings. The router does not dynamically update port forwarding settings and cannot port
forward to your px4-300r if its IP address changes.
To resolve this problem, try one of the following processes:
●
Increase the length of the DHCP lease: Your router attempts to remember all DHCP clients and
assigns them the same IP address every time they request an IP address; however, the router
forgets clients if they do not request an IP address for a certain amount of time. Your router has a
setting for the duration of the validity of the DHCP lease. If your network requires DHCP, this
may be a good solution; however, it is not always guaranteed to work. Occasionally updating your
router's port forwarding settings may be required.
●
●
Use Static DHCP: Some routers allow you to assign Static IP addresses through the DHCP
system based on the MAC address of the device. This ensures that the px4-300r always gets the
same IP address, and your port forwarding settings are always correct. Static DHCP allows you
to leave your px4-300r in DHCP mode. Refer to your router's documentation for more information
on configuring DHCP settings.
Use a Manual IP Address: Changing the Manual IP address reduces the reliance of your px4-300r
on the DHCP server; however, you must perform additional configuration for it to work properly.
1. Log in to your router and write down the DHCP range it is using.
Troubleshooting Routers 143
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Management
2. Refer to your router's documentation for more information on configuring DHCP settings.
3. Navigate to the IP address settings interface page on your px4-300r . For more information,
check the Network Settings section of this manual.
4. Enter a new IP address that is outside of your router's DHCP range. For example, if your
router is distributing IP addresses in the range of 192.168.14.2 through 192.168.14.50, you
must assign the px4-300r a number between 192.168.14.51 and 192.168.14.255. Make sure
you are assigning the px4-300r an IP address that is not in use by another device.
5. Enter a subnet mask. The subnet mask describes the size of your network. For most
networks this is 255.255.255.0 which allows for 256 network devices. If you are on a larger
network or are using the self-assigned APIPA range (169.254.x.x), you must use a
255.255.0.0 or larger subnet mask.
6. For best results, enter the IP address(es) for your DNS Server(s).
7. If necessary, enter the IP address(es) for your WINS server(s).
8. Enter a gateway address. In most cases, this is the IP address of your router.
9. If necessary, update your router's port forwarding information with the new static DHCP IP
address.
144
Troubleshooting Routers
Download from Www.Somanuals.com. All Manuals Search And Download.
AdditionalSupport
How to Get Help
LenovoEMC is committed to providing excellent customer support. To meet this goal, Lenovo Customer
Support offers a variety of support options designed to meet the needs of a wide range of users. For
complete information on the support options available for your product, visit the web support site at
http://support.lenovoemc.com.
Here's just some of what is available on LenovoEMC's award-winning web support site, 24 hours a day, 7
days a week:
●
●
●
●
●
●
●
●
Answers to frequently asked questions (FAQs)
Online help pages with troubleshooting or basic how to information
Up-to-date LenovoEMC software
Advanced online support options, such as 1-on-1 live chat and email
Electronic copies of product manuals
Information on telephone support options
Information on advanced technical service options, such as data recovery
Warranty information and product return instructions
Support options available may vary depending on your region and language of choice. LenovoEMC's
specific customer support policies (including fees for services) and procedures change as technology and
market conditions dictate. To obtain information about LenovoEMC's current policies, select the Support
Policy link from the top banner on the web support site or write to:
LenovoEMC Customer Service
4059 South 1900 West
Roy, UT 84067, USA
146
How to Get Help
Download from Www.Somanuals.com. All Manuals Search And Download.
AdditionalSupport
Support
The Support feature opens the LenovoEMC web site where you can get more information about your px4-
300r. The Support page provides access to content for learning more about using and supporting your px4-
300r.
Refer to the LenovoEMC Support site for more information.
Support 147
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal
Safety Information
Observe the following guidelines when using your px4-300r Network Storage Array:
●
●
Follow all instructions marked on the px4-300r and in the documentation.
Use only the power supply cable provided with the px4-300r. Always use the appropriate power
supply cable for your country.
●
Unplug the px4-300r before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
●
●
●
●
Do not use the px4-300r near water. Do not spill liquid on or into the px4-300r.
Do not place the px4-300r on an unstable surface.
Do not place the px4-300r near or on a radiator or heat register.
Openings in the px4-300r are provided for fans and air ventilation and should not be blocked or
covered. Make sure the px4-300r has ample ventilation (at least 6 inches or 127 mm) in front and
behind the unit.
●
●
Do not walk on the power cord or allow anything to rest on it.
There is a danger of explosion if the coin cell lithium battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the equipment manufacturer. Dispose of used
batteries according to local, state, regional, and federal regulations.
Under any of the following conditions, unplug the px4-300r from the wall outlet and contact technical
support:
●
●
●
●
The power cord or plug is damaged.
Liquid has been spilled into the device.
The device does not function properly when the operating instructions are followed.
The device was dropped or the exterior enclosure is damaged.
149
Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal
Open Source
The software included in this product contains copyrighted software that is licensed under open source
agreements. Components of this software covered under GPL or other open source licenses are fully
documented as to license and redistribution requirements in the ReadMe file available with the source
code. The corresponding source code package is available for download from the LenovoEMC web site at
http://support.lenovoemc.com. To locate the download page for open source code, select your network
storage product and your operating system. Scroll down the page to the search field and enter “open
source”. In addition, you can also obtain a copy of the applicable open source code on CD by sending a
money order or check for $10 (USD) to:
LenovoEMC, Ltd. • ATTN: Source Code • 4059 South 1900 West • Roy, UT 84067 USA
Please include the model name for your network storage product with the request.
Open Source 150
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal
Warranty Information
Limited Warranty Notice
Lenovo Network Storage products are covered by the terms of the Lenovo Limited Warranty, version L505-
0010-02 08/2011. Read the Lenovo Limited Warranty (LLW) at http://www.lenovo.com/warranty/llw_02/.
You can view the LLW in a number of languages from this Web site. If you cannot view the LLW from the
Web site, contact your local Lenovo office or reseller to obtain a printed version of the LLW.
Warranty Period
The warranty period for px4-300r Network Storage Array products is 3 years for product purchased in all
regions.
Applicable Types of Warranty Service (as described in the Lenovo Limited Warranty):
1. Customer Replaceable Unit (“CRU”) Service
7. Product Exchange Service
For network storage products, coverage for product exchange transportation may differ by region. For
additional information on this coverage, please contact a local Lenovo service provider.
For a full explanation of the types of warranty service, refer to the full warranty available at
http://www.lenovo.com/warranty/llw_02/.
NOTE: Lenovo Network Storage products are manufactured solely to standard commercial grade levels of
reliability and are not intended for use in any systems that require the products to conform to the higher
grades of reliability, such as critical safety systems, life-support systems, medical devices, nuclear
facilities, military devices, satellites, or aviation equipment. Lenovo shall not be liable for any damages
incurred if Lenovo products are used in such capacities, and no warranty shall apply.
Limited Warranty for Iomega Products
Iomega network storage products are covered by a limited 3 year warranty. Iomega warranties are now
serviced by Lenovo Customer Support. See the LenovoEMC web support site at
http://support.lenovoemc.com for complete warranty terms and conditions.
151
Warranty Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal
Regulatory Information
This topic provides regulatory information for various countries.
Manufacturer/Responsible Party
LenovoEMC, Ltd., 4059 South 1900 West, Roy, UT 84067
EU Representative
Lenovo, Einsteinova 21, 851 01 Bratislava, Slovakia
Federal Communication Commission Interference Statement
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
●
●
●
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV technician for help.
Lenovo is not responsible for any radio or television interference caused by using other than
specified or recommended cables and connectors or by unauthorized changes or modifications to
this equipment. Unauthorized changes or modifications could void the user’s authority to operate
the equipment.
Canadian Verification
This Class A digital apparatus complies with Canadian ICES-003.
European Union conformity
Lenovo declares that this network storage product conforms to all applicable European Directives and
Standards, including by way of example, 2004/108/EC and 2006/95/EC.
The Declaration of Conformity is available at http://support.lenovoemc.com/ce.
Regulatory Information 152
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal
Important WEEE Information
The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for
example, European Directive 2002/96/EC, India E-Waste Management & Handling Rules, 2011).
Appliances are labeled in accordance with local regulations concerning waste electrical and electronic
equipment (WEEE). These regulations determine the framework for the return and recycling of used
appliances as applicable within each geography. This label is applied to various products to indicate that
the product is not to be thrown away, but rather put in the established collection systems for reclaiming
these end-of-life products.
Country-specific information is available at http://www.lenovo.com/recycling.
European Union RoHS
Lenovo products sold in the European Union, on or after January 3, 2013, meet the requirements of the
European Union Directive 2011/65/EU; The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment (RoHS).
For more information about Lenovo progress on RoHS, go to:
http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.pdf
India RoHS
RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.
Lithium Battery – California Perchlorate Information
This product contains a CR coin cell lithium battery which contains perchlorate material—special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Polyvinyl Chloride (PVC) Cable and Cord Notice
WARNING: Handling the cord on this product or cords associated with accessories sold with this product
will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or
other reproductive harm. Wash hands after handling.
Recycling and environmental information
Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their
equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist
equipment owners in recycling their IT products. For information on recycling Lenovo and LenovoEMC
products, go to: http://www.lenovo.com/recycling.
Dispose of the coin cell lithium battery as required by local ordinances or regulations.
153
Regulatory Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal
Export classification notice
This product is subject to the United States Export Administration Regulations (EAR) and has an Export
Classification Control Number (ECCN) of 5A992.c It can be re-exported except to any of the embargoed
countries in the EAR E1 country list.
Regulatory Information 154
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal
Copyright and Trademark Information
© 2013 LenovoEMC, Ltd. All rights reserved.
Lenovo and the Lenovo logo are registered trademarks of Lenovo in the United States, other countries, or
both. The EMC logo is a registered trademark of EMC Corporation in the United States and/or other
countries. LenovoEMC and LifeLine are registered trademarks or trademarks of LenovoEMC, Ltd. in the
United States, other countries, or both. Windows is a trademark of the Microsoft group of companies. Mac
is a trademark of Apple Inc., registered in the United States and other countries. Linux® is the registered
trademark of Linus Torvalds in the U.S. and other countries. Certain other product names, brand names,
and company names may be trademarks or designations of their respective owners.
155
Copyright and Trademark Information
Download from Www.Somanuals.com. All Manuals Search And Download.
|