Lenovo Z710
Hardware
Maintenance
Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
Before using this information and the product it supports, be sure to read the general information
First Edition (August 2013)
© Copyright Lenovo 2013. All rights reserved.
LENOVO products, data, computer software, and services have been developed exclusively at private
expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with
limited and restricted rights to use, reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are
delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclo-
sure is subject to restrictions set forth in Contract No. GS-35F-05925.
© 2013 Lenovo
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1030 Hard disk drive(HDD)/Memory/
Handling devices that are sensitive to
cover ..............................................................36
1070 PCI Express Mini Card for wireless
1140 Base cover, speakers, audio board,
Strategy for replacing a hard disk
Important notice for replacing a system
Important information about replacing RoHS
assembly........................................................57
Restoring the factory contents by using
Operating System Recovery Disc (one or
Applications and Drivers Recovery Disc
Putting the computer to sleep or shutting it
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
About this manual
This manual contains service and reference information for the following
Lenovo product:
IdeaPad Z710
Use this manual to troubleshoot problems.
The manual is divided into the following sections:
• The common sections provide general information, guidelines, and safety
information required for servicing computers.
• The product-specific section includes service, reference, and product-specific
parts information.
Important:
This manual is intended only for trained servicers who are familiar with
Lenovo products. Use this manual to troubleshoot problems effectively.
Before servicing a Lenovo product, make sure to read all the information
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
General safety
Follow these rules below to ensure general safety:
• Observe a good housekeeping in the area where the machines are put during
and after the maintenance.
• When lifting any heavy object:
1. Make sure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt
to lift it.
4. Lift it by standing or pushing up with your leg muscles; this action could
avoid the strain from the muscles in your back. Do not attempt to lift any
object that weighs more than 16 kg (35 lb) or that you think is too heavy for
you.
• Do not perform any action that causes hazards to the customer, or that makes
the machine unsafe.
• Before you start the machine, make sure that other service representatives
and the customer are not in a hazardous position.
• Please remove covers and other parts in a safe place, away from all
personnel, while you are servicing the machine.
• Keep your toolcase away from walk areas so that other people will not trip it
over.
• Do not wear loose clothing that can be trapped in the moving parts of the
machine. Make sure that your sleeves are fastened or rolled up above your
elbows. If your hair is long, fasten it.
• Insert the ends of your necktie or scarf inside clothing or fasten it with the
nonconductive clip, about 8 centimeters (3 inches) from the end.
• Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for
your clothing.
Attention: Metal objects are good electrical conductors.
• Wear safety glasses when you are hammering, drilling, soldering, cutting
wire, attaching springs, using solvents, or working in any other conditions
that may be hazardous to your eyes.
• After service, reinstall all safety shields, guards, labels, and ground wires.
Replace any safety device that is worn or defective.
• Reinstall all covers correctly before returning the machine to the customer.
• Fan louvers on the machine help to prevent the overheating of internal
components. Do not obstruct fan louvers or cover them with labels or
stickers.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Electrical safety
Observe the following rules when working on electrical equipments.
Important:
Use only approved tools and test equipments. Some hand tools have
handles covered with a soft material that does not insulate you when
working with live electrical currents.
Many customers have rubber floor mats near their machines that contain
small conductive fibers to decrease electrostatic discharges. Do not use such
kind of mat to protect yourself from electrical shock.
• Find the room emergency power-off (EPO) switch, disconnecting switch, or
electrical outlet. If an electrical accident occurs, you can then operate the
switch or unplug the power cord quickly.
• Do not work alone under hazardous conditions or near the equipment that
has hazardous voltages.
• Disconnect all power before:
– Performing a mechanical inspection
– Working near power supplies
– Removing or installing main units
• Before you start to work on the machine, unplug the power cord. If you
cannot unplug it, ask the customer to power-off the wall box that supplies
power to the machine, and to lock the wall box in the off position.
• If you need to work on a machine that has exposed electrical circuits, observe
the following precautions:
– Ensure that another person, familiar with the power-off controls, is near
you.
Attention: Another person must be there to switch off the power, if
necessary.
– Use only one hand when working with powered-on electrical equipment;
keep the other hand in your pocket or behind your back.
Attention: An electrical shock can occur only when there is a complete
circuit. By observing the above rule, you may prevent a current from
passing through your body.
– When using testers, set the controls correctly and use the approved probe
leads and accessories for that tester.
– Stand on suitable rubber mats (obtained locally, if necessary) to insulate
you from grounds such as metal floor strips and machine frames.
Observe the special safety precautions when you work with very high voltages;
instructions for these precautions are in the safety sections of maintenance
information. Be extremely careful when you measure the high voltages.
• Regularly inspect and maintain your electrical hand tools for safe operational
condition.
• Do not use worn or broken tools and testers.
• Never assume that power has been disconnected from a circuit. First, check it
to make sure that it has been powered off.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
• Always look carefully for possible hazards in your work area. Examples of
these hazards are moist floors, nongrounded power extension cables, power
surges, and missing safety grounds.
• Do not touch live electrical circuits with the reflective surface of a plastic
dental mirror. The surface is conductive; such touching can cause personal
injury and machine damage.
• Do not service the following parts with the power on when they are removed
from their normal operating places in a machine:
– Power supply units
– Pumps
– Blowers and fans
– Motor generators
and similar units. (This practice ensures correct grounding of the units.)
• If an electrical accident occurs:
– Use caution: do not become a victim yourself.
– Switch off the power.
– Send the victim to get medical aid.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety inspection guide
The purpose of this inspection guide is to assist you in identifying potential
unsafe conditions. As each machine was designed and built, required safety
items were installed to protect users and service personnel from injury. This
guide addresses only those items. You should use good judgment to identify
potential safety hazards due to attachment of non-Lenovo features or options not
covered by this inspection guide.
If any unsafe conditions are present, you must determine how serious the
apparent hazard could be and whether you can continue without first correcting
the problem.
Consider these conditions and the safety hazards they present:
• Electrical hazards, especially primary power (primary voltage on the frame
can cause serious or fatal electrical shock)
• Explosive hazards, such as a damaged CRT face or a bulging capacitor
• Mechanical hazards, such as loose or missing hardware
To determine whether there are any potential unsafe conditions, use the
following checklist at the beginning of every service task. Begin the checks with
the power off, and the power cord disconnected.
Checklist:
1. Check exterior covers for damage (loose, broken, or sharp edges).
2. Turn off the computer. Disconnect the power cord.
3. Check the power cord for:
a. A third-wire ground connector in good condition. Use a meter to measure
third-wire ground continuity for 0.1 ohm or less between the external
ground pin and the frame ground.
b. The power cord should be the type specified in the parts list.
c. Insulation must not be frayed or worn.
4. Check for cracked or bulging batteries.
5. Remove the cover.
6. Check for any obvious non-Lenovo alterations. Use good judgment as to the
safety of any non-Lenovo alterations.
7. Check inside the unit for any obvious unsafe conditions, such as metal filings,
contamination, water or other liquids, or signs of fire or smoke damage.
8. Check for worn, frayed, or pinched cables.
9. Check that the power-supply cover fasteners (screws or rivets) have not been
removed or tampered with.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Handling devices that are sensitive to electrostatic discharge
Any computer part containing transistors or integrated circuits (ICs) should be
considered sensitive to electrostatic discharge (ESD). ESD damage can occur
when there is a difference in charge between objects. Protect against ESD damage
by equalizing the charge so that the machine, the part, the work mat, and the
person handling the part are all at the same charge.
Notes:
1. Use product-specific ESD procedures when they exceed the
requirements noted here.
2. Make sure that the ESD protective devices you use have been certified
(ISO 9000) as fully effective.
When handling ESD-sensitive parts:
• Keep the parts in protective packages until they are inserted into the product.
• Avoid contact with other people.
• Wear a grounded wrist strap against your skin to eliminate static on your
body.
• Prevent the part from touching your clothing. Most clothing is insulative and
retains a charge even when you are wearing a wrist strap.
• Use the black side of a grounded work mat to provide a static-free work
surface. The mat is especially useful when handling ESD-sensitive devices.
• Select a grounding system, such as those listed below, to provide protection
that meets the specific service requirement.
Notes:
The use of a grounding system to guard against ESD damage is desirable but
not necessary.
– Attach the ESD ground clip to any frame ground, ground braid, or green-
wire ground.
– When working on a double-insulated or battery-operated system, use an
ESD common ground or reference point. You can use coax or connector-
outside shells on these systems.
– Use the round ground prong of the ac plug on ac-operated computers.
Grounding requirements
Electrical grounding of the computer is required for operator safety and correct
system function. Proper grounding of the electrical outlet can be verified by a
certified electrician.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notices: multilingual translations
The safety notices in this section are provided in English, French, German,
Hebrew, Italian, Japanese, and Spanish.
Safety notice 1
Before the computer is powered on after FRU replacement, make sure all
screws, springs, and other small parts are in place and are not left loose
inside the computer. Verify this by shaking the computer and listening for
rattling sounds. Metallic parts or metal flakes can cause electrical shorts.
Avant de remettre l’ordinateur sous tension après remplacement d’une unité
en clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en
place et bien fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun
bruit suspect ne se produit. Des pièces métalliques ou des copeaux de métal
pourraient causer un court-circuit.
Bevor nach einem FRU-Austausch der Computer wieder angeschlossen
wird, muß sichergestellt werden, daß keine Schrauben, Federn oder andere
Kleinteile fehlen oder im Gehäuse vergessen wurden. Der Computer muß
geschüttelt und auf Klappergeräusche geprüft werden. Metallteile oder-
splitter können Kurzschlüsse erzeugen.
Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di
una FRU, accertarsi che tutte le viti, le molle e tutte le altri parti di piccole
dimensioni siano nella corretta posizione e non siano sparse all’interno
dell’elaboratore. Verificare ciò scuotendo l’elaboratore e prestando
attenzione ad eventuali rumori; eventuali parti o pezzetti metallici possono
provocare cortocircuiti pericolosi.
Antes de encender el sistema despues de sustituir una FRU, compruebe que
todos los tornillos, muelles y demás piezas pequeñas se encuentran en su
sitio y no se encuentran sueltas dentro del sistema. Compruébelo agitando el
sistema y escuchando los posibles ruidos que provocarían. Las piezas
metálicas pueden causar cortocircuitos eléctricos.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Safety notice 2
DANGER
Some standby batteries contain a small amount of nickel and cadmium. Do
not disassemble a standby battery, recharge it, throw it into fire or water, or
short-circuit it. Dispose of the battery as required by local ordinances or
regulations. Use only the battery in the appropriate parts listing. Use of an
incorrect battery can result in ignition or explosion of the battery.
Certaines batteries de secours contiennent du nickel et du cadmium. Ne les
démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne
les mettez pas en court-circuit. Pour les mettre au rebut, conformez-vous à
la réglementation en vigueur. Lorsque vous remplacez la pile de sauvegarde
ou celle de l’horloge temps réel, veillez à n’utiliser que les modèles cités dans
la liste de pièces détachées adéquate. Une batterie ou une pile inappropriée
risque de prendre feu ou d’exploser.
Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet,
kann geringe Mengen Nickel und Cadmium enthalten. Sie darf nicht
zerlegt, wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser
ausgesetzt werden. Bei der Entsorgung die örtlichen Bestimmungen für
Sondermüll beachten. Beim Ersetzen der Bereitschafts-oder Systembatterie
nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist.
Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen.
Alcune batterie di riserva contengono una piccola quantità di nichel e
cadmio. Non smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né
cortocircuitarle. Smaltirle secondo la normativa in vigore (DPR 915/82,
successive disposizioni e disposizioni locali). Quando si sostituisce la
batteria dell’RTC (real time clock) o la batteria di supporto, utilizzare
soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di una
batteria non adatta potrebbe determinare l’incendio o l’esplosione della
batteria stessa.
Algunas baterías de reserva contienen una pequeña cantidad de níquel y
cadmio. No las desmonte, ni recargue, ni las eche al fuego o al agua ni las
cortocircuite. Deséchelas tal como dispone la normativa local. Utilice sólo
baterías que se encuentren en la lista de piezas. La utilización de una batería
no apropiada puede provocar la ignición o explosión de la misma.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notice 3
DANGER
The battery pack contains small amounts of nickel. Do not disassemble it,
throw it into fire or water, or short-circuit it. Dispose of the battery pack as
required by local ordinances or regulations. Use only the battery in the
appropriate parts listing when replacing the battery pack. Use of an
incorrect battery can result in ignition or explosion of the battery.
La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni
à l’eau. Ne la mettez pas en court-circuit. Pour la mettre au rebut,
conformez-vous à la réglementation en vigueur. Lorsque vous remplacez la
batterie, veillez à n’utiliser que les modèles cités dans la liste de pièces
détachées adéquate. En effet, une batterie inappropriée risque de prendre
feu ou d’exploser.
Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt
werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll
beachten. Beim Ersetzen der Batterie nur Batterien des Typs verwenden, der
in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu
Entzündung oder Explosion führen.
La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel
fuoco o nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in
vigore (DPR 915/82, successive disposizioni e disposizioni locali). Quando
si sostituisce la batteria, utilizzare soltanto i tipi inseriti nell’appropriato
Catalogo parti. L’impiego di una batteria non adatta potrebbe determinare
l’incendio o l’esplosione della batteria stessa.
Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni
recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal
como dispone la normativa local. Utilice sólo baterías que se encuentren en
la lista de piezas al sustituir la batería. La utilización de una batería no
apropiada puede provocar la ignición o explosión de la misma.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Safety notice 4
DANGER
The lithium battery can cause a fire, an explosion, or a severe burn. Do not
recharge it, remove its polarized connector, disassemble it, heat it above
100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of
the battery as required by local ordinances or regulations. Use only the
battery in the appropriate parts listing. Use of an incorrect battery can result
in ignition or explosion of the battery.
La pile de sauvegarde contient du lithium. Elle présente des risques
d’incendie, d’explosion ou de brûlures graves. Ne la rechargez pas, ne
retirez pas son connecteur polarisé et ne la démontez pas. Ne l’exposez pas
à une temperature supérieure à 100°C, ne la faites pas brûler et n’en exposez
pas le contenu à l’eau. Mettez la pile au rebut conformément à la
réglementation en vigueur. Une pile inappropriée risque de prendre feu ou
d’exploser.
Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden,
explodieren oder schwere Verbrennungen hervorrufen. Batterien dieses
Typs dürfen nicht aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt
werden. Auch darf ihr Inhalt nicht mit Wasser in Verbindung gebracht oder
der zur richtigen Polung angebrachte Verbindungsstecker entfernt werden.
Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten.
Beim Ersetzen der Batterie nur Batterien des Typs verwenden, der in der
Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu
Entzündung oder Explosion führen.
La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o
procurare gravi ustioni. Evitare di ricaricarla, smontarne il connettore
polarizzato, smontarla, riscaldarla ad una temperatura superiore ai 100
gradi centigradi, incendiarla o gettarla in acqua. Smaltirla secondo la
normativa in vigore (DPR 915/82, successive disposizioni e disposizioni
locali). L’impiego di una batteria non adatta potrebbe determinare
l’incendio o l’esplosione della batteria stessa.
La batería de repuesto es una batería de litio y puede provocar incendios,
explosiones o quemaduras graves. No la recargue, ni quite el conector
polarizado, ni la desmonte, ni caliente por encima de los 100°C (212°F), ni la
incinere ni exponga el contenido de sus celdas al agua. Deséchela tal como
dispone la normativa local.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notice 5
If the LCD breaks and the fluid from inside the LCD gets into your eyes or
on your hands, immediately wash the affected areas with water at least for
15 minutes. Seek medical care if any symptoms caused by the fluid are
present after washing.
Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans
les yeux ou sur les mains une partie du fluide, rincez-les abondamment
pendant au moins quinze minutes. Consultez un médecin si des symptômes
persistent après le lavage.
Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der
Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Der
LCD-Bildschirm besteht aus Glas und kann zerbrechen, wenn er
unsachgemäß behandelt wird oder der Computer auf den Boden fällt. Wenn
der Bildschirm beschädigt ist und die darin befindliche Flüssigkeit in
Kontakt mit Haut und Augen gerät, sollten die betroffenen Stellen
mindestens 15 Minuten mit Wasser abgespült und bei Beschwerden
anschließend ein Arzt aufgesucht werden.
Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto
entrasse in contatto con gli occhi o le mani, lavare immediatamente le parti
interessate con acqua corrente per almeno 15 minuti; poi consultare un
medico se i sintomi dovessero permanere.
Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o
sus manos, lave inmediatamente las áreas afectadas con agua durante
15 minutos como mínimo. Obtenga atención medica si se presenta algún
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Safety notice 6
DANGER
To avoid shock, do not remove the plastic cover that protects the lower part
of the inverter card.
Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en
plastique protégeant la partie inférieure de la carte d’alimentation.
Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der
Spannungswandlerplatine umgibt, nicht entfernen.
Per evitare scosse elettriche, non rimuovere la copertura in plastica che
avvolge la parte inferiore della scheda invertitore.
Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja
de la tarjeta invertida.
Safety notice 7
DANGER
Though the main batteries have low voltage, a shorted or grounded battery
can produce enough current to burn personnel or combustible materials.
Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou
la mise à la masse d’une batterie peut produire suffisamment de courant
pour brûler des matériaux combustibles ou causer des brûlures corporelles
graves.
Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei
Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien
zu entzünden oder Verletzungen bei Personen hervorzurufen.
Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in
corto circuito o a massa può fornire corrente sufficiente da bruciare materiali
combustibili o provocare ustioni ai tecnici di manutenzione.
Aunque las baterías principales tienen un voltaje bajo, una batería
cortocircuitada o con contacto a tierra puede producir la corriente suficiente
como para quemar material combustible o provocar quemaduras en el
personal.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notice 8
DANGER
Before removing any FRU, turn off the computer, unplug all power cords
from electrical outlets, remove the battery pack, and then disconnect any
interconnecting cables.
Avant de retirer une unité remplaçable en clientèle, mettez le système hors
tension, débranchez tous les cordons d’alimentation des socles de prise de
courant, retirez la batterie et déconnectez tous les cordons d’interface.
Die Stromzufuhr muß abgeschaltet, alle Stromkabel aus der Steckdose
gezogen, der Akku entfernt und alle Verbindungskabel abgenommen sein,
bevor eine FRU entfernt wird.
Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese
elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare
i cavi di interconnessione.
Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de
las tomas de corriente eléctrica, quite la batería y, a continuación, desconecte
cualquier cable de conexión entre dispositivos.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Laser compliance statement
Some models of Lenovo computer are equipped from the factory with an optical
storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are
also sold separately as options. If one of these drives is installed, it is certified in
the U.S. to conform to the requirements of the Department of Health and Human
Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class
1 laser products. Elsewhere, the drive is certified to conform to the requirements
of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60
825 for Class 1 laser products.
If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note
the following:
CAUTION
Use of controls or adjustments or performance of procedures other than
those specified herein might result in hazardous radiation exposure.
O uso de controles, ajustes ou desempenho de procedimentos diferentes
daqueles aqui especificados pode resultar em perigosa exposição à radiação.
Pour éviter tout risque d’exposition au rayon laser, respectez les consignes
de réglage et d’utilisation des commandes, ainsi que les procédures décrites.
Werden Steuer- und Einstellelemente anders als hier festgesetzt verwendet,
kann gefährliche Laserstrahlung auftreten.
L’utilizzo di controlli, regolazioni o l’esecuzione di procedure diverse da
quelle specificate possono provocare l’esposizione a.
El uso de controles o ajustes o la ejecución de procedimientos distintos de los
aquí especificados puede provocar la exposición a radiaciones peligrosas.
Opening the CD-ROM drive, the DVD-ROM drive, or any other optical storage
device could result in exposure to hazardous laser radiation. There are no
serviceable parts inside those drives. Do not open.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may
contain an embedded Class 3A or Class 3B laser diode. Note the following:
DANGER
Emits visible and invisible laser radiation when open. Do not stare into the
beam, do not view directly with optical instruments, and avoid direct
exposure to the beam.
Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe
diretamente por meio de instrumentos óticos e evite exposição direta com o
feixe de luz.
Rayonnement laser si carter ouvert. Évitez de fixer le faisceau, de le regarder
directement avec des instruments optiques, ou de vous exposer au rayon.
Laserstrahlung bei geöffnetem Gerät. Nicht direkt oder über optische
Instrumente in den Laserstrahl sehen und den Strahlungsbereich meiden.
Kinyitáskor lézersugár ! Ne nézzen bele se szabad szemmel, se optikai
eszközökkel. Kerülje a sugárnyalábbal való érintkezést!
Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non
guardarlo direttamente con strumenti ottici e evitare l’esposizione diretta al
fascio.
Radiación láser al abrir. No mire fijamente ni examine con instrumental
óptico el haz de luz. Evite la exposición directa al haz.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Important service information
This chapter presents the following important service information:
Important:
BIOS and device driver fixes are customer-installable. The BIOS and device
drivers are posted on the customer support site:
Strategy for replacing FRUs
Before replacing parts:
Make sure that all software fixes, drivers, and BIOS downloads are installed
before replacing any FRUs listed in this manual.
After a system board is replaced, ensure that the latest BIOS is loaded to the
system board before completing the service action.
To download software fixes, drivers, and BIOS, follow the steps below:
2. Enter the serial number or select a product or use Lenovo smart
downloading.
3. Select the BIOS/Driver/Applications and download.
4. Follow the directions on the screen and install the necessary software.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Important service information
Use the following strategy to prevent unnecessary expense for replacing and
servicing FRUs:
• If you are instructed to replace an FRU, but the replacement does not solve
the problem, reinstall the original FRU before you continue.
• Some computers have both a processor board and a system board. If you are
instructed to replace either of them, and replacing one of them does not solve
the problem, reinstall that board, and then replace the other one.
• If an adapter or a device consists of more than one FRU, any of the FRUs may
be the cause of the error. Before replacing the adapter or device, remove the
FRUs one by one to see if the symptoms change. Replace only the FRU that
changed the symptoms.
Attention: The setup configuration on the computer you are servicing may have
been customized. Running Automatic Configuration may alter the settings. Note
the current configuration settings (using the View Configuration option); then,
when service has been completed, verify that those settings remain in effect.
Strategy for replacing a hard disk drive
Always try to run a low-level format before replacing a hard disk drive. This will
cause all customer data on the hard disk to be lost. Make sure that the customer
has a current backup of the data before performing this action.
Attention: The drive startup sequence in the computer you are servicing may
have been changed. Be extremely careful during write operations such as
copying, saving, or formatting. If you select an incorrect drive, data or programs
can be overwritten.
Important notice for replacing a system board
Some components mounted on a system board are very sensitive. Improper
handling can cause damage to those components, and may cause a system
malfunction.
Attention: When handling a system board:
• Do not drop the system board or apply any excessive force to it.
• Avoid rough handling of any kind.
• Avoid bending the system board and hard pushing to prevent cracking at
each BGA (Ball Grid Array) chipset.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Important information about replacing RoHS compliant FRUs
RoHS, The Restriction of Hazardous Substances in Electrical and
Electronic Equipment Directive (2002/95/EC) is a European Union legal
requirement affecting the global electronics industry. RoHS requirements
must be implemented on Lenovo products placed on the market after June
2006. Products on the market before June 2006 are not required to have
RoHS compliant parts. If the original FRU parts are non-compliant,
replacement parts can also be non-compliant. In all cases if the original
FRU parts are RoHS compliant, the replacement part must also be RoHS
compliant.
Note: RoHS and non-RoHS FRU part numbers with the same fit and function are
identified with unique FRU part numbers.
Lenovo plans to transit to RoHS compliance well before the implementation date
and expects its suppliers to be ready to support Lenovo’s requirements and
schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS
compliant FRUs. The following statement pertains to these products and any
product Lenovo produces containing RoHS compliant FRUs.
RoHS compliant FRUs have unique FRU part numbers. Before or after the RoHS
implementation date, failed RoHS compliant parts must always be replaced with
RoHS compliant ones, so only the FRUs identified as compliant in the system
HMM or direct substitutions for those FRUs may be used.
Products marketed before June 2006 Products marketed after June 2006
Current or
original part
Replacement
FRU
Current or
original part
Replacement
FRU
Non-RoHS
Non-RoHS
Non-RoHS
RoHS
Can be Non-RoHS
Can be RoHS
Must be RoHS
Must be RoHS
Can sub to RoHS
Must be RoHS
Note: A direct substitution is a part with a different FRU part number that is
automatically shipped by the distribution center at the time of the order.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
General checkout
General checkout
This chapter presents the following information:
Before you go to the checkout, make sure to read the following important notes:
Important notes:
• Only certified trained personnel can service the computer.
• Before replacing any FRU, read the entire page on removing and
replacing FRUs.
• When you replace FRUs, use new nylon-coated screws.
• Be extremely careful during such write operations as copying,
saving, or formatting. Drives in the computer that you are servicing
sequence might have been altered. If you select an incorrect drive, data
or programs might be overwritten.
• Replace an FRU only with another FRU of the correct model. When
you replace an FRU, make sure that the machine model and the FRU part
number are correct by referring to the FRU parts list.
• An FRU should not be replaced just because of a single,
unreproducible failure. Single failures can occur for a variety of reasons
that have nothing to do with a hardware defect, such as cosmic radiation,
electrostatic discharge, or software errors. Consider replacing an FRU
only when a problem recurs. If you suspect that an FRU is defective,
clear the error logs and run the test again. If the error does not recur, do
not replace the FRU.
• Be careful not to replace a nondefective FRU.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
What to do first
When you do return an FRU, you must include the following information in the
parts exchange form or parts return form that you attach to it:
1. Name and phone number of servicer
2. Date of service
3. Date on which the machine failed
4. Date of purchase
5. Procedure index and page number in which the failing FRU was detected
6. Failing FRU name and part number
7. Machine type, model number, and serial number
8. Customer’s name and address
Note for warranty: During the warranty period, the customer may be
responsible for repair costs if the computer damage was caused by misuse,
accident, modification, unsuitable physical or operating environment, or
improper maintenance by the customer.
The following is a list of some common items that are not covered under
warranty and some symptoms that might indicate that the system was subjected
to stress beyond normal use.
Before checking problems with the computer, determine whether the damage is
covered under the warranty by referring to the following list:
The following are not covered under warranty:
• LCD panel cracked from the application of excessive force or from being
dropped
• Scratched (cosmetic) parts
• Distortion, deformation, or discoloration of the cosmetic parts
• Plastic parts, latches, pins, or connectors that have been cracked or broken by
excessive force
• Damage caused by liquid spilled into the system
• Damage caused by the improper insertion of a PC Card or the installation of
an incompatible card
• Improper disk insertion or use of an optical drive
• Diskette drive damage caused by pressure on the diskette drive cover, foreign
material in the drive, or the insertion of a diskette with multiple labels
• Damaged or bent diskette eject button
• Fuses blown by attachment of a nonsupported device
• Forgotten computer password (making the computer unusable)
• Sticky keys caused by spilling a liquid onto the keyboard
• Use of an incorrect AC adapter on laptop products
The following symptoms might indicate damage caused by nonwarranted
activities:
• Missing parts might be a symptom of unauthorized service or modification.
• If the spindle of a hard disk drive becomes noisy, it may have been subjected
to excessive force, or dropped.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
General checkout
Power system checkout
To verify a symptom, follow the steps below:
1. Turn off the computer.
2. Remove the battery pack.
3. Connect the AC adapter.
4. Make sure that power is supplied when you turn on the computer.
5. Turn off the computer.
6. Disconnect the AC adapter and install the charged battery pack.
7. Make sure that the battery pack supplies power when you turn on the
computer.
If you suspect a power problem, see the appropriate one of the following power
supply checkouts:
Checking the AC adapter
You are here because the computer fails only when the AC adapter is used.
• If the power-on indicator does not turn on, check the power cord of the AC
adapter for correct continuity and installation.
• If the computer does not charge during operation, go to “Checking
operational charging”.
To check the AC adapter, follow the steps below:
1. Unplug the AC adapter cable from the computer.
2. Measure the output voltage at the plug of the AC adapter cable. See the
following figure:
Pin
1
Voltage (V DC)
+20
0
2
2
1
Note: Output voltage for the AC adapter pin No. 2 may differ from the one you
are servicing.
3. If the voltage is not correct, replace the AC adapter.
4. If the voltage is acceptable, do the following:
• Replace the system board.
Note: Noise from the AC adapter does not always indicate a defect.
Checking operational charging
To check whether the battery charges properly during operation, use a
discharged battery pack or a battery pack that has less than 50% of the total
power remaining when installed in the computer.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Perform operational charging. If the battery status indicator or icon does not
light on, remove the battery pack and let it return to room temperature. Reinstall
the battery pack. If the charge indicator or icon is still off, replace the battery
pack.
If the charge indicator still does not light on, replace the system board. Then
reinstall the battery pack. If it is still not charged, go to the next section.
Checking the battery pack
Battery charging does not start until the Power Meter shows that less than 95%
of the total power remains; under this condition the battery pack can charge to
100% of its capacity. This protects the battery pack from being overcharged or
from having a shortened life.
To check your battery, move your cursor to the Power Meter icon in the icon tray
®
of the Windows taskbar and wait for a moment (but do not click it), and the
percentage of battery power remaining is displayed. To get detailed information
about the battery, double-click the Power Meter icon.
Note: If the battery pack becomes hot, it may not be able to be charged. Remove
it from the computer and leave it at room temperature for a while. After it cools
down, reinstall and recharge it.
To check the battery pack, follow the steps below:
1. Turn off the computer.
2. Remove the battery pack and measure the voltage between battery terminals
1 (+) and 7 (-). See the following figure:
Terminal
Voltage (V DC)
+0 to +14
1
7
7(-)
6(-)
5
Ground (-)
4
3
2(+)
1(+)
3. If the voltage is less than +11.0 V DC, the battery pack has been discharged.
Note: Recharging will be continued for at least 3 hours, even though the
indicator does not light on.
If the voltage is still less than +11.0 V DC after recharging, replace the battery.
4. If the voltage is more than +11.0 V DC, measure the resistance between
battery terminals 5 and 7. The resistance must be 4 to 30 KΩ.
If the resistance is not correct, replace the battery pack. If the resistance is
correct, replace the system board.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Related service information
Related service information
This chapter presents the following information:
Restoring the factory contents by using Recovery Disc Set
When the hard disk drive or solid state drive is replaced because of a failure, no
product recovery program is on the new drive. In this case, you must use the
Recovery Disc Set for the computer. Order the Recovery Disc Set and the drive at
the same time so that you can recover the new drive with the pre-installed
software when they arrive.
The Recovery Disc Set consists of the following set of DVDs to restore the
computer to the original factory configuration.
Start Recovery Disc (one disc)
This disc is used to format the hard disk drive and initiate the recovery process.
Operating System Recovery Disc (one or more discs)
This disc restores the Microsoft Windows operating system.
Applications and Drivers Recovery Disc (one or more discs)
This disc restores the pre-installed applications and drivers on the computer.
Supplemental Recovery Disc
This disc contains additional content, such as software for specific models and
updates to the software that was preloaded on the computer. Not all recovery
disc sets come with a Supplemental Recovery Disc.
To restore the computer to the original factory configuration using the recovery
disc set, do the following:
1. Insert the bootable Start Recovery Disc into the optical drive.
2. Start the computer. When the Lenovo logo comes up, immediately press F12;
on the boot sequence menu, select the optical drive as the first boot-up device.
The computer will boot from the Start Recovery Disc. Follow the on-screen
instructions to begin the recovery process.
3. Read the license. If you agree with the terms, select I accept these terms and
conditions and then click Next.
4. Insert the Operating System Recovery Disc when prompted and click Yes to
begin the operating system recovery process.
5. Insert the Applications and Drivers Recovery Disc when prompted and then
click OK to begin the applications and drivers recovery process.
6. If you have a Supplemental Recovery Disc, insert it when prompted and click
Yes. If you do not have a Supplemental Recovery Disc, click No.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
7. When all of the data has been copied from the last disc in the set, remove the
disc and restart the computer.
Note: The remainder of the recovery process is fully automated and no
action is required by you. The computer will restart into the Windows
desktop several times and you might experience periods when no activity is
apparent on the screen for several minutes at a time. This is normal.
8. When the recovery process is complete, the Welcome to the Microsoft
Windows screen is displayed. Follow the instructions on the screen to
complete the Windows setup.
Passwords
As many as three passwords may be needed for any Lenovo computer: the
power-on password (POP), the hard disk password (HDP), and the supervisor
password (SVP).
If any of these passwords has been set, a prompt for it appears on the screen
whenever the computer is turned on. The computer does not start until the
password is entered.
Exception: If only an SVP is installed, the password prompt does not appear
when the operating system is booted.
Power-on password
A power-on password (POP) protects the system from being powered on by an
unauthorized person. The password must be entered before an operating system
can be booted.
Hard-disk password
There are two hard-disk passwords (HDPs):
+ User HDP - for the user
+ Master HDP - for the system administrator, who can use it to get access to the
hard disk drive even if the user has changed the user HDP
Attention: If the user HDP has been forgotten, check whether a master HDP has
been set. If it has, it can be used for access to the hard disk drive. If no master
HDP is available, neither Lenovo nor Lenovo authorized service technicians
provide any services to reset either the user or the master HDP, or to recover data
from the hard disk drive. The hard disk drive can be replaced for a scheduled fee.
Supervisor password
A supervisor password (SVP) protects the system information stored in the BIOS
Setup Utility. The user must enter the SVP in order to get access to the BIOS
Setup Utility and change the system configuration.
Attention: If the SVP has been forgotten and cannot be made available to the
servicer, there is no service procedure to reset the password. The system board
must be replaced for a scheduled fee.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Related service information
Power management
Note: Power management modes are not supported for APM operating system.
To reduce power consumption, the computer has three power management
modes: screen blank, sleep (standby), and hibernation.
Screen blank mode
If the time set on the “Turn off monitor” timer in the operating system expires,
the LCD backlight turns off. You can also turn off the LCD backlight by pressing
Fn+F2.
To end screen blank mode and resume normal operation, press any key.
Putting the computer to sleep or shutting it down
When you have finished working with your computer, you can put it to sleep or
shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer
to sleep. When the computer is in sleep mode, you can quickly wake it to resume
use, bypassing the startup process. To put the computer to sleep, do one of the
following:
• Close the display panel.
• Press the power button.
• Open the charms bar, then select Settings
→ Power
→ Sleep.
Attention: Wait until the power indicator light starts blinking (indicating that
the computer is in sleep mode) before you move your computer. Moving your
computer while the hard disk is spinning can damage the hard disk, causing loss
of data.
To wake the computer, do one of the following:
• Press any key on the keyboard.
• Press the power button.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Shutting down the computer
If you are not going to use your computer for a long time, shut it down. To shut
down your computer:
• Open the charms bar, then select Settings
.
• Select Power
→ Shut down.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Lenovo Z710
This chapter presents the following product-specific service references and
product-specific parts information:
• “FRU tests” on page 31
Specifications
The following table lists the specifications of the Lenovo Z710:
Table 1. Specifications
Feature
Description
Processor
See the system properties of your computer, you can do
this as follows:
Click Start, right-click Computer; then from the pull down
menu select Properties.
Core Chipset
• Intel HM86
Graphic Chipset • Nvidia graphics card
• N14P-GS/N14P-GV2
• Integrated (UMA)
Display
• 1600x900 pixels HD+/220nit, 1920x1080 pixels FHD/
220nit
Standard
memory
• DDR3L-1600MHz
CMOS RAM
• 256 bytes
Hard disk drive
• 2.5-inch, 7.0 mm/9.5 mm
• SATA II /SATA III
Optical drive
• 9.5 mm tray-in Rambo/Blue Ray Rambo
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Table 1. Specifications (continued)
Feature
Description
I/O port
• External monitor connector
• Stereo headphone jack
• Microphone jack
• RJ45 × 1
• USB 2.0 × 2, USB 3.0 × 2
• 2 in 1 slot × 1 (SD/MMC)
• N/A
MODEM slot
TV
• N/A
Audio
• 1/8" Stereo Headphone and Microphone combo jack
• Array Mic with voice control(Voice control option)
• Built-in stereo speakers
• Built-in microphone
• CRT port × 1
Video
• HDMI port × 1
Ethernet (on the
system board)
• 10/100M/1G
• WIFI × 1
PCI Express Mini
Card slot
WLAN
• Intel 2x2 BGN+ BT 4.0(support WIDI)
• Non-Intel Wifi BGN 1x1
• Non-Intel Wifi BGN 1x1+ BT4.0
• N/A
WWAN
Bluetooth
wireless
• Option
Keyboard
Touch pad
• Numberic Keyboard
• Multi-touch touchpad
Finger Print
Reader
• N/A
Integrated
camera
• 1280 × 720 pixels
Battery
• Li-Cylinder,4 cell, 41Wh
AC adapter
• 65 W/90 W/135 W
Pre-installed
• Linpus lite/DOS, mini Support Win7, Win8
operating system
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Table 2. Status indicators
Symbol
Indicator status
On (solid white)
Blinking
Meaning
The computer is powered on.
The computer is in sleep mode.
The computer is powered off.
The battery has more than 20% charge.
The battery has between 5% and 20%
charge.
Off
On (solid white)
Solid amber
Fast blinking amber There is a problem with the battery or the
battery connection.
Slow blinking amber The battery is being charged. When
battery charge reaches 20%, the blinking
color changes to white.
Slow blinking white The battery has between 20% and 80%
charge and is still charging. When the
battery reaches 80% charge, the light will
stop blinking, but charging will continue
until the battery is fully charged.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Fn key combinations
The following describes the features of each function key.
Table 3. Fn key combinations
Fn + Home:
Fn + End:
Activates the pause function.
Activates the break function.
Enables/disables the scroll lock.
Activates the system request.
Fn + PgUp:
Fn + PgDn:
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
FRU replacement notices
This section presents notices related to removing and replacing parts. Read this
section carefully before replacing any FRU.
Screw notices
Loose screws can cause a reliability problem. In the Lenovo computer, this
problem is addressed with special nylon-coated screws that have the following
characteristics:
• They maintain tight connections.
• They do not easily come loose, even with shock or vibration.
• They are harder to tighten.
• Each one should be used only once.
Do the following when you service this machine:
• Keep the screw kit in your tool bag.
• Always use new screws.
• Use a torque screwdriver if you have one.
Tighten screws as follows:
• Plastic to plastic
Turn an additional 90° after the screw head touches the surface of the plastic
part:
more than 90°
(Cross-section)
• Logic card to plastic
Turn an additional 180° after the screw head touches the surface of the logic
card:
more than 180°
(Cross-section)
• Torque driver
If you have a torque screwdriver , refer to the “Torque” column for each step.
• Make sure that you use the correct screws. If you have a torque screwdriver,
tighten all screws firmly to the torque shown in the table. Never use a screw
that you removed. Use a new one. Make sure that all screws are
tightened firmly.
• Ensure torque screwdrivers are calibrated correctly following country
specifications.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Removing and replacing an FRU
This section presents exploded figures with the instructions to indicate how to
remove and replace the FRU. Make sure to observe the following general rules:
1. Do not attempt to service any computer unless you have been trained and
certified. An untrained person runs the risk of damaging parts.
3. Begin by removing any FRUs that have to be removed before the failing FRU.
Any of such FRUs are listed at the top of the page. Remove them in the order
in which they are listed.
4. Follow the correct sequence in the steps to remove the FRU, as given in the
figures by the numbers in square callouts.
5. When turning a screw to replace an FRU, turn it in the direction as given by
the arrow in the figure.
6. When removing the FRU, move it in the direction as given by the arrow in the
figure.
7. To put the new FRU in place, reverse the removal procedures and follow any
of the notes that pertain to replacement. For information about connecting
and arranging internal cables, see “Locations” on page 68.
8. When replacing an FRU, use the correct screw as shown in the procedures.
DANGER
Before removing any FRU, turn off the computer, unplug all power cords
from electrical outlets, remove the battery pack, and then disconnect any of
the interconnecting cables.
Attention: After replacing an FRU, do not turn on the computer until you have
made sure that all screws, springs, and other small parts are in place and none
are loose inside the computer. Verify this by shaking the computer gently and
listening for rattling sounds. Metallic parts or metal flakes can cause electrical
short circuits.
Attention: The system board is sensitive to, and can be damaged by, electrostatic
discharge. Before touching it, establish personal grounding by touching a
ground point with one hand or using an electrostatic discharge (ESD) strap
(P/N 6405959) to remove potential shock reasons.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1010 Battery pack
DANGER
Only use the battery specified in the parts list for your computer. Any other
battery could ignite or explode.
Figure 1. Removal steps of battery pack
Unlock the manual battery latch
. Holding the spring-loaded battery latch in
a
the unlocked position
, remove the battery pack in the direction shown by the
b
arrow
.
c
a
c
b
When installing: Install the battery pack along the slide rails of the slot. Then
make sure that the battery release lever is in the locked position.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card
slot compartment cover
For access, remove this FRU:
Figure 3. Removal steps of Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover
Loosen the screws
that secure the compartment cover. Remove the
a
compartment cover
.
b
a
a
a
b
Step
Screw (quantity)
Color
Torque
1.5 ~ 2.0 kgfcm
M2 × 6 mm, flat-head, nylok-coated (3) Black
a
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
1040 Hard disk drive
For access, remove these FRUs in order:
Attention:
• Do not drop the hard disk drive or apply any physical shock to it.
The hard disk drive is sensitive to physical shock. Improper handling
can cause damages and permanent loss of data.
• Before removing the drive, suggest the customer to backup all the
information on it if possible.
• Never remove the drive while the system is operating or is in suspend
mode.
Figure 4. Removal steps of hard disk drive
Detach connector
. Remove the frame fixing screws
.
a
b
a
b
b
b
b
Step
Screw (quantity)
Color
Torque
M2 × 6 mm, flat-head, nylok-coated (4) Black
1.5 ~ 2.0 kgfcm
a
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Figure 4. Removal steps of hard disk drive (continued)
Pull the tab up in the direction shown by arrow
from the slot.
to remove the hard disk drive
c
c
Hold the SATA receptacle connector with one hand and pull the hard disk drive
(secured in the metal frame) in the direction shown below to detach the
connector.
When installing: Make sure that the HDD connector is attached firmly.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 4. Removal steps of hard disk drive (continued)
Remove four screws
and detach the metal frame from the hard disk drive.
d
d
d
d
d
Step Screw (quantity)
Color Torque
P/N
M3 × 3 mm, flat-head, nylokcoated Black 1.5 ~ 2.0 kgfcm 90202769
(1)
e
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1050 Optical drive
For access, remove this FRU:
Figure 5. Removal steps of optical drive
Remove the screw
. Pull the optical drive out in the direction shown by arrow
a
.
b
a
b
Step
Screw (quantity)
Color
Torque
M2 × 6 mm, flat-head, nylokcoated (1) Black
2.0 ~ 2.5 kgfcm
a
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
1060 DIMM
For access, remove these FRUs in order:
Figure 6. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
direction shown by arrows
, and then unplug the DIMM in the direction
a
shown by arrow
.
b
b
a
a
Note: If only one DIMM is used on the computer you are servicing, the card must
be installed in SLOT-0 (
: lower slot), but not in SLOT-1 (
: upper slot).
z
b
a
When installing: Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly
fixed in the slot and difficult to be moved.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1070 PCI Express Mini Card for wireless LAN/WAN
For access, remove these FRUs in order:
Figure 7. Removal steps of PCI Express Mini Card for wireless LAN/WAN
Disconnect the two wireless LAN cables (black, white)
, and then remove the
a
screw
.
b
b
a
a
In step
, unplug the jacks by using the removal tool antenna RF connector
a
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by arrows.
Notes: wireless LAN card has 2 cables in step
.
a
Wireless LAN card in some models may have 3 cables in step
.
a
Step
Screw (quantity)
Color
Torque
M2 × 3 mm, flat-head, nylok-coated (1) Black
1.5 ~ 2.0 kgfcm
b
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 7. Removal steps of PCI Express Mini Card for wireless LAN/WAN (continued)
Remove the card in the direction shown by arrow
.
c
c
When installing:
• In models with a wireless LAN card that has two antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled 1, and the white cable (2nd)
(AUX) into jack labeled 2 on the card.
• In models with a wireless LAN card that has three antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into
jack labeled 3, and the white cable (2nd) (AUX) into jack labeled 2 on the
card.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 8. Removal steps of keyboard (continued)
Lift the keyboard a little , and then detach the connector in the direction
b
shown by arrows
.
cd
b
c
d
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1090 Fan assembly
For access, remove these FRUs in order:
Figure 9. Removal steps of fan assembly
Detach the fan connector in the direction shown by arrow
and loosen two
a
screws
to lift the fan assembly.
b
a
b
b
c
When installing: Make sure that the fan connector is attached firmly to the
system board.
Step
Screw (quantity)
Color Torque
Black 1.5 ~ 2.0 kgfcm
M2.0 × 6 mm, flat-head, nylok-coated (2)
b
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
1100 Keyboard bezel
For access, remove these FRUs in order:
Figure 10. Removal steps of keyboard bezel
Remove twenty-one screws
on the bottom.
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
Step
Screw (quantity)
Color
Torque
M2 × 6 mm, flat-head, nylokcoated (21) Black
1.5 ~ 2.0 kgfcm
a
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Figure 10. Removal steps of keyboard bezel (continued)
Remove five screws
.
b
b
b
b
b
b
Step
Screw (quantity)
M2 × 6 mm, flat-head, nylokcoated(5)
Color
Torque
Black
1.5 ~ 2.0 kgfcm
a
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 10. Removal steps of keyboard bezel (continued)
Detach the touch pad connector in the direction shown by arrows
, power
c d
board connector in the direction shown by arrows
,unplug speakers
c d
connector in the direction shown by arrow
.
e
e
c
d
When installing: Make sure that all the FPC connectors, speakers connectors
and power board connector are attached firmly.
Remove the keyboard bezel in the direction shown by arrow
.
f
f
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1110 System board
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard
surface, such as metal, wood, or composite.
• Avoid rough handling of any kind.
• In the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded
surface such as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 11. Removal steps of system board
Loosen screws
.
a
a
a
a
Step Screw (quantity)
M2.0 × 6 mm, flat-head, nylok-coated (3)
Color Torque
Black 2.0 ~ 2.5 kgfcm
a
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Figure 11. Removal steps of system board (continued)
Unplug DC-IN cable connector
, camera connector in the direction shown by
g
arrow
, LCD connector in the direction shown by arrow
, detach IO board
f
e
connector in the direction shown by arrow
,optical drive board connector
a b
in the direction shown by arrow
.
c d
f
g
e
c
a
b
d
When installing: Make sure that all the connectors are attached firmly.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 11. Removal steps of system board (continued)
Remove the system board in the direction shown by arrow
.
f
h
a
a
When installing: When attaching the system board to the base cover, adjust the
placement of the jacks, and make sure that both of the USB jacks are attached to
the holes on the base cover as shown in
might cause a damage.
. Improper placement of those jacks
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1120 LCD unit
For access, remove these FRUs in order:
Figure 12. Removal steps of LCD unit
Release the antenna cables from the cable guides in the direction shown by
arrows
. Remove four screws
.
a
b
b
b
b
b
a
a
a
Step
Screw (quantity)
Color
Torque
M2.5 × 5 mm, flat-head, nylok-coated (4) Black
1.5 ~ 2.0 kgfcm
b
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 12. Removal steps of LCD unit (continued)
• Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
Remove the LCD unit in the direction shown by arrows
.
c
c
c
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1130 CPU
For access, remove these FRUs in order:
Attention: CPU is extremely sensitive. When you service the CPU, avoid any
kind of rough handling.
Figure 13. Removal steps of CPU
Rotate the head of the screw in the direction shown by arrow
to release the
a
lock, then remove the CPU in the direction shown by arrow
.
b
a
a
b
b
When installing: Place the CPU on the CPU socket in the direction shown by
arrow , and then rotate the head of the screw in the direction shown by arrow
to secure the CPU.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
1140 Base cover, speakers, audio board, power board, power
assembly and heat sink assembly
For access, remove these FRUs in order:
Figure 14. Removal steps of base cover, speakers, audio board, power board, power
assembly and heat sink assembly
Loosen four screws
, and then remove the speakers in the direction shown by
a
arrows
.
b
a
a
a
a
b
b
Step Screw (quantity)
Color Torque
P/N
M2 × 2 + 4.8 flat-head, nylok-coated Black 1.5 ~ 2.0 kgfcm 90204137
(4)
a
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Figure 14. Removal steps of base cover, speakers, audio board, power board, power
assembly and heat sink assembly (continued)
Loosen the screw
, then remove the audio board in the direction shown by
a
arrow
.
b
a
b
When installing: Make sure that the power connector is attached firmly.
Step Screw (quantity)
M2.0 × 6 mm, flat-head, nylok-coated (1)
Color
Torque
Black
1.5 ~ 2.0 kgfcm
a
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 14. Removal steps of base cover, speakers, audio board, power board, power
assembly and heat sink assembly (continued)
Remove the power assembly in the direction shown by arrow
.
a
a
Loosen screw
to lift the power board in the direction shown by arrow
.
b
a
a
b
Step
Screw (quantity)
Color
Torque
M2 × 3 mm, flat-head, nylok-coated (1) Black
1.5 ~ 2.0 kgfcm
a
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Figure 14. Removal steps of base cover, speakers, audio board, power board, power
assembly and heat sink assembly (continued)
Loosen four screws
to lift the heat sink assembly in the direction shown by
a
arrow
.
b
a
a
a
a
b
Step Screw (quantity)
M2 × 3 mm, flat-head, nylok-coated (4)
Color Torque
Black 1.0 ~1.5 kgfcm
a
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
label:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
Rating label
On line print rating label
3G Label
KCC Label
GML Label
WLAN Label for Malaysia
WLAN Label for CA\US\TW\Indonesia\Israel
WLAN Label for BRAZIL
WLAN Label for ISRAEL
Indonesia D side label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
b
a
c
d
e
g
f
j
h
i
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1150 LCD front bezel
For access, remove these FRUs in order:
Figure 15. Removal steps of LCD front bezel
Remove two screws
.
a
a
a
Step
Screw (quantity)
Color
Torque
M2.5 × 5 mm, flat-head, nylokcoated
(2)
Black
1.5 ~ 2.0 kgfcm
a
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 15. Removal steps of LCD front bezel (Continued)
Remove the LCD front bezel in the direction shown by arrows
.
b
b
b
b
b
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1160 LCD panel, LCD cable and hinges
For access, remove these FRUs in order:
Figure 16. Removal steps of LCD panel, LCD cable and hinges
Remove six screws
shown by arrow
. Unplug the integrated camera connector in the direction
a
b
. Lift the LCD panel in the direction shown by arrows
.
c
b
a
a
a
a
c
a
a
c
c
When installing: Make sure that the connector is attached firmly.
Step
Screw (quantity)
Color
Torque
1.5 ~ 2.0 kgfcm
M2.5 × 5 mm, flat-head, nylokcoated (6) Black
a
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Figure 16. Removal steps of LCD panel, LCD cable and hinges (continued)
Remove six screws
. Lift the LCD panel with hinges in the direction shown by
d
arrows
.
e
d
d
d
d
d
d
e
e
Step
Screw (quantity)
Color
Torque
M2.0 × 3 mm, flat-head, nylokcoated (6) Black
1.0 ~ 1.5 kgfcm
d
Note: The LCD cables are attached to the LCD panel by a metal connector.
Peel off the adhesive tape and detach the connector in the direction shown by
arrow
.
f
f
When installing: Make sure that the metal connector is attached firmly.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
1170 Integrated camera
For access, remove these FRUs in order:
Figure 17. Removal steps of integrated camera
Note: The integrated camera is stuck on the top center of the LCD cover.
Remove the integrated camera from the LCD cover
.
a
a
When installing: Stick the integrated camera to the top center of the LCD cover
and adjust the placement of it to make sure the connector is attached firmly.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
1180 Antenna assembly and LCD cover
For access, remove these FRUs in order:
Figure 18. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the
direction shown by arrows
.
a
a
a
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Locations
Front view
Integrated camera
a
b
c
d
e
f
g
h
i
Wireless antennas
Built-in microphone
Computer display
Speakers
Power button
Novo button
Touch pad
System status indicators
b
a
b
c
d
e
f
g
h
i
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Bottom and Left-side view
AC power adapter jack
a
b
c
d
e
f
g
h
i
j
k
l
Ventilation slots
VGA port
HDMI port
RJ-45 port
USB ports
Memory card slot
Battery latch - manual
Battery pack
Louvers
Battery latch - spring loaded
Hard disk drive /Memory /Mini PCI Express Card slot compartment
h
i
j
k
a
b
c
d
e
l
f
g
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Table 4. Parts list—Overall
No. FRU
FRU no.
CRU ID
1
2
3
4
5
5
5
5
DUMBO2 Upper Case
**
N
N
**
**
**
**
90204156
90005019
20200412
20200102
20200223
20200222
DUMBO2 Power Board
Wlan, Intel 7260BN 2x2BN+BT PCIE HMC WLAN
Wlan, Cbt BCM94313HMG 1x1BGN HMC WLAN
Wlan, Liteon HB125 1x1BGN HMC WLAN
Wlan, Cbt BCM943142HM 1x1BGN+BT4.0 HMC
WLAN
5
5
6
6
6
7
7
7
7
7
8
9
Wlan, Liteon WB225 1x1BGN+BT4.0 HMC WLAN
Wlan, Liteon WB335 1x1BGN+BT4.0 HMC WLAN
SY L12S4E01 14.4V41Wh 4cell bty
SP/L L12M4E01 14.88V41Wh 4cell bty
LG L12L4E01 14.8V41Wh 4cell bty
Intel I7-4702MQ 2.2G 4cPGA CPU
Intel I7-4700MQ 2.4G 4cPGA CPU
Intel I5-4200M 2.6G D0 2cPGA QS CPU
Intel I3-4100M 2.6G D0 2cPGA QS CPU
Intel I3-4000M 2.4G D0 2cPGA QS CPU
DUMBO2 ODD Board
DUMBO2 Speaker
Z710 GGEC 1624 Speaker
DUMBO2 MB DIS GV2 2G
DUMBO2 MB W8P DIS GV2 2G
DUMBO2 MB W8S DIS GV2 2G
DUMBO2 MB DIS GS 2G
DUMBO2 MB W8P DIS GS 2G
DUMBO2 MB W8S DIS GS 2G
DUMBO2 Thermal Model W/FAN
HMT425S6AFR6A-PB 2GB DDR3L 1600
RMT3190EB76F8W-1600 2GB DDR3L 1600
M471B5173QH0-YK0 4GB DDR3L 1600
HMT451S6AFR8A-PB 4GB DDR3L 1600
SM321NQ08ICF 4GB DDR3L 1600
RMT3170EB68F9W-1600 4GB DDR3L 1600
M471B5773DH0-YK0 2GB DDR3L 1600
M471B5173BH0-YK0 4GB DDR3L 1600
20200224
20200437
121500171
121500172
121500173
102500541
102500540
102500644
102500645
102500594
90005018
90204136
101500386
90004560
90004561
90004562
90004563
90004564
90004565
90204147
11201299
11201835
11202079
11201300
11201834
11201512
11200502
11201966
**
**
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
*
9
10
10
10
10
10
10
11
13
13
13
13
13
13
13
13
*
*
*
*
*
*
*
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Table 4. Parts list—Overall (continued)
No. FRU
FRU no.
CRU ID
13
13
13
13
13
13
14
15
16
17
17
17
MT4KTF25664HZ-1G6E1 2GB DDR3L 1600
MT8KTF51264HZ-1G6J1 4GB DDR3L 1600
M471B1G73QH0-YK0 8GB DDR3L 1600
HMT41GS6AFR8A-PB 8GB DDR3L 1600
SM322NW08IAF 8GB DDR3L 1600
MT16KTF1G64HZ-1G6E1 8GB DDR3L 1600
BAMBI2 Audio Board
DUMBO2 Lower Case
11201967
11201342
11202080
11201301
11201514
11201304
90004368
90204143
90004559
16200384
16200388
16200551
*
*
*
*
*
*
N
N
N
**
**
**
DUMBO2 Battery Switch Board
HDD, ST320LT012 6G 7mm 5.4K 320G HDD
HDD, ST320LM001 6G 9.5mm 5.4K 320G HDD
HDD, WD3200LPCX-24C6HT0 6G 7mm 5.4K 320G
HDD
17
17
17
17
17
17
HDD, HTS545032A7E660 6G 7mm 5.4K 320G HDD
HDD, ST500LM012 6G 9.5mm 5.4K 500G HDD
HDD, ST500LT012 6G 7mm 5.4K 500G HDD
HDD, HTS545050A7E660 6G 7mm 5.4K 500G HDD
HDD, MQ01ABF050 6G 7mm 5.4K 500G HDD
HDD, WD5000LPCX-24C6HT0 6G 7mm 5.4K 500G
HDD
16200405
16200387
16200383
16200404
16200433
16200395
**
**
**
**
**
**
17
17
17
17
17
17
18
19
20
20
20
20
20
21
HDD, ST1000LM024 6G 9.5mm 5.4K 1T HDD
HDD, HTS541010A9E660 6G 9.5mm 5.4K 1T HDD
HDD, TSB MQ01ABD100 6G 9.5mm 5.4K 1T HDD
HDD, WD10JPCX-24UE4T0 6G 9.5mm 5.4K 1T HDD
HDD, ST1000LM014 6G 9.5mm 1T SSHD
HDD, ST500LM000 6G 7mm 500G SSHD
DUMBO2 Lower Case Door
16200385
16200400
16200429
16200393
16200389
16200391
90204140
90202793
25205807
25205806
25212030
25209260
25209259
90204142
**
**
**
**
**
**
N
N
**
**
**
**
**
N
BAMBI DC-IN Cable
ODD, HLDS GU70N 9.5 Rambo ODD
ODD, PLDS DU-8A5SH 9.5 Rambo ODD
ODD, PSN UJ8DB Slim Tray Rambo w/o bezel
ODD, HLDS BU10N 9.5 BD Rambo ODD
ODD, Panasonic UJ262 9.5 BD Rambo ODD
DUMBO2 ODD Bezel Rambo
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
17.3-in. HD TFT
Table 5. Parts list—17.3-in. HD TFT
No. FRU
FRU no.
CRU ID
1
2
3
3
3
3
3
3
4
5
6
7
8
DUMBO2 LCD Bezel
90204144
90204149
18200208
18200384
18200159
18201051
18201052
18201053
90204145
90204146
90204155
90004558
90204148
N
N
N
N
N
N
N
N
N
N
N
N
N
DUMBO2 LCD Bezel Screw Pack
AUO B173RW01 V5 HD+ G W LED1 NB LCD
CMI N173FGE-L23 HD+ G W LED1 NB LCD
SEC LTN173KT02-L01 HD+ G W LED1 NB LCD
LGD LP173WD1-TLE1 HD+ G W LED1 NB LCD
LGD LP173WF1-TLA2 FHD G W LED1 NB LCD
CMI N173HGE L21 FHD G W LED1 NB LCD
DUMBO2 Hinge L
DUMBO2 Hinge R
DUMBO2 LCD Cable
DUMBO2 Camera
DUMBO2 LCD Cover
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Keyboard
Table 6. Parts list—Keyboard
Language
P/N
CRU ID
English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian English&French
Korean
Traditional Chinese
Russian
French
German
Arabic
Brazilian
Dutch
Greek
Hebrew
Hungarian
Four Nordic countries
Belgian
Icelandic
Slovenian
Swiss
International English
Czechoslovakian
Bulgarian
Indian
25211262
25211263
25211264
25211265
25211266
25211267
25211268
25211269
25211270
25211271
25211272
25211273
25211274
25211275
25211276
25211277
25211279
25211280
25211281
25211282
25211283
25211284
25211285
25211286
25211287
25211288
25211289
25211290
25211291
25211354
25211355
25211356
25211357
25211358
25211359
25211360
25211361
25211362
25211363
25211364
25211365
25211366
25211367
25211368
25211369
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
OKI
Z710
English
U.S. English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian English&French
Korean
Traditional Chinese
Russian
OKI
(Black)
French
German
Arabic
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Table 6. Parts list—Keyboard
Language
P/N
CRU ID
Brazilian
Dutch
Greek
25211370
25211372
25211373
25211374
25211375
25211376
25211377
25211378
25211379
25211380
25211381
25211382
25211383
25211384
25211202
25211203
25211204
25211205
25211206
25211207
25211208
25211209
25211210
25211211
25211212
25211213
25211214
25211215
25211216
25211217
25211218
25211219
25211220
25211221
25211222
25211223
25211224
25211225
25211226
25211227
25211228
25211229
25211230
25211231
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
Hebrew
Hungarian
Four Nordic countries
OKI(Black) Belgian
(continued) Icelandic
Slovenian
Swiss
International English
Czechoslovakian
Bulgarian
Indian
English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian English&French
Korean
Traditional Chinese
Russian
French
German
Arabic
Brazilian
Japanese
Dutch
Greek
Hebrew
Hungarian
Four Nordic countries
Belgian
Icelandic
Slovenian
Swiss
Z710
(continued)
Darfon
International English
Czechoslovakian
Bulgarian
Indian
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Table 6. Parts list—Keyboard (continued)
Language
P/N
CRU ID
Indian
Bulgarian
Czechoslovakian
International English
Swiss
Slovenian
Icelandic
Italian
Four Nordic countries
Hungarian
Hebrew
Greek
Dutch
Japanese
Brazilian
Arabic
German
French
Russian
Traditional Chinese
Korean
Canadian English&French
Latin
Portuguese
Thai
Turkish
Spanish
Belgian
U.K. English
English
U.S. English
25211322
25211321
25211320
25211319
25211318
25211317
25211316
25211295
25211314
25211313
25211312
25211311
25211310
25211309
25211308
25211307
25211306
25211305
25211304
25211303
25211302
25211301
25211300
25211299
25211298
25211297
25211296
25211315
25211294
25211292
25211293
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
Z710
Darfon
(continued) (Black)
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Table 6. Parts list—Keyboard
Language
P/N
CRU ID
English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian English&French
Korean
Traditional Chinese
Russian
French
German
Arabic
Brazilian
Dutch
Greek
Hebrew
Hungarian
Four Nordic countries
Belgian
Icelandic
Slovenian
Swiss
International English
Czechoslovakian
Bulgarian
Indian
25211232
25211233
25211234
25211235
25211236
25211237
25211238
25211239
25211240
25211241
25211242
25211243
25211244
25211245
25211246
25211247
25211249
25211250
25211251
25211252
25211253
25211254
25211255
25211256
25211257
25211258
25211259
25211260
25211261
25211323
25211324
25211325
25211326
25211327
25211328
25211329
25211330
25211331
25211332
25211333
25211334
25211335
25211336
25211337
25211338
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
JME
Z710
(continued)
English
U.S. English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian English&French
Korean
Traditional Chinese
Russian
JME
(Black)
French
German
Arabic
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Table 6. Parts list—Keyboard
Language
P/N
CRU ID
Brazilian
Dutch
Greek
Hebrew
Hungarian
Four Nordic countries
25211339
25211341
25211342
25211343
25211344
25211345
25211346
25211347
25211348
25211349
25211350
25211351
25211352
25211353
**
**
**
**
**
**
**
**
**
**
**
**
**
**
Z710
JME (Black) Belgian
(continued) (continued) Icelandic
Slovenian
Swiss
International English
Czechoslovakian
Bulgarian
Indian
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Miscellaneous parts
Table 7. Parts list—Miscellaneous parts
FRU
P/N
CRU ID
System miscellaneous parts:
N
90202778
90204141
90203934
• (a) BAMBI HDD Bracket
• (b) DUMBO2 ODD Bezel BD
• (c) BAMBI2 CPU Mylar
Cable miscellaneous parts:
N
• (d) DUMBO2 TP Cable
90204153
90204154
90204150
90204151
90204152
• (e) DUMBO2 HDD Cable
• (f) DUMBO2 Power Board Cable
• (g) DUMBO2 ODD Cable
• (h) DUMBO2 IO Cable
Note: Italicized letters in parentheses are references to the
exploded view in “Overall” on page 71.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
AC adapters
Table 8. Parts list—3-pin AC adapters
FRU
P/N
CRU ID
65W, Delta ADLX65NDC3A 20V3.25A adapter
65W, Liteon ADLX65NLC3A 20V3.25A adapter
65W, Chicony ADLX65NCC3A 20V3.25A adapter
90W, Chicony ADLX90NCC3A 20V4.5A adapter
90W, Delta ADLX90NDC3A 20V4.5A adapter
90W, Liteon ADLX90NLC3A 20V4.5A adapter
135W, Delta ADL135NDC3A 20V6.75A adapter
135W, Liteon ADL135NLC3A 20V6.75A adapter
36200249
36200251
36200253
36200254
36200250
36200252
36200314
36200318
*
*
*
*
*
*
*
*
Screws
Table 9. Parts list—screws
FRU
P/N
CRU ID
BAMBI Screw M3*3L (K) B-NI
90202769
90202770
90202771
90204137
N
N
N
N
BAMBI Screw M2.5*5L(K)B-NI,NY
BAMBI Screw M2*6L(K,D4.6) B-ZN #1 NY
DUMBO2 SCREW M2*2L+4.8 K B-ZN NY
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Power cords
A Lenovo power cord for a specific country or region is usually available only in
that country or region:
Table 10. Parts list—3-pin power cords
Region
P/N
CRU ID
CCC
145000602
*
• SSD YD-118-1+IEC53RVV+SSD-3-2B-1 1m
CCC
145000600
145000599
145000598
145000597
145000596
145000595
145000594
145000593
145000592
145000591
145000590
145000589
145000588
145000587
145000586
145000585
145000568
145000567
145000566
145000565
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
• LINETEK PC323+RVV300/300+LS15 1m
Argentina
• LINETEK LS15+H03VV-F+LP39 1m
Denmark
• LINETEK LS15+H03VV-F+LP-38 1m
Switzerland
• LINETEK LS15+H03VV-F+LP-37 1m
Brazil
• LINETEK LS15 H03VV-F LP26A 1m
Israel
• LINETEK LS15+H03VV-F+LP-41 1m
UL
• LINETEK LP-30B + SPT-2 + LS15 1m
UK
• LINETEK LP-61L+ H03VV-F+ LS15 1m
India
• LINETEK PE-361+ H05VV-F+ LS15 1m
Italy
• LINETEK LS15+H03VV-F+PE-336 1m
Korea
• LINETEK LS15+H05VV-F+LP-E04A 1m
Australia
• LINETEK LS15+H03VV-F+LP-23A 1m
Taiwan
• LINETEK LS15+VCTF+LP-53 1m
Japan
• LINETEK LS15+VCTF+LP-54 1m
Africa
• LINETEK LS15+H03VV-F+PE-364 1m
CE
• LINETEK LP-34+H03VV-F + LS15 1m
CCC
• Longwell LSG-31+RVV300/300+LS-18 1m
Argentina
• Longwell LP-24+H03VV-F+LS-18 1m
Denmark
• Longwell LP-40+H03VV-F+LS-18 1m
Switzerland
• Longwell LP-37+H03VV-F+LS-18 1m
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Table 10. Parts list—3-pin power cords (continued)
Region
P/N
CRU ID
Brazil
145000564
145000563
145000562
145000561
145000560
145000559
145000558
145000557
145000556
145000555
145000554
145000553
145000538
145000528
145000534
145000524
145000527
145000526
145000537
145000605
145000536
145000535
*
• Longwell LP-46+H03VV-F+LS-18 1m
Israel
• Longwell LP-41+H03VV-F+LS-18 1m
UL
• Longwell LP-30B+SPT-2 18AWG+LS-18 1m
UK
• Longwell LP-61L+H03VV-F+LS-18 1m
India
• Longwell LP-67+BIS+LS-18 1m
Italy
• Longwell LP-22+H03VV-F+LS-18 1m
Korea
• Longwell LP-486+KTLH03VV-F+LS-5 1m
Australia
• Longwell LP-23A+LFC-3R+LS-18 1m
Taiwan
• Longwell LP-71+VCTF+LS-33 1m
Japan
• Longwell LP-54+VCTF+LS-18 1m
Africa
• Longwell LP-39+H03VV-F+LS-18 1m
CE
• Longwell LP-34A+H03VV-F+LS-18 1m
CCC
• VOLEX GB10S3+RVV 300/500+VAC5S 1m
Argentina
• VOLEX VA2073+H03VV-F+VAC5S 1m
Denmark
• VOLEX MP233D+H03VV-F+VAC5S 1m
Switzerland
• VOLEX MP232+H03VV-F+VAC5S 1m
Brazil
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
• VOLEX CH10S3+H03VV-F+VAC5S 1m
Israel
• VOLEX SI16S3+H03VV-F+VAC5S 1m
UL
• Volex US15S3+SPT-2 ?VAC5S 1m
UK
• VOLEX MP5004+H03VV-F+VAC5S 1m
India
• VOLEX IA6A3+IS694+VAC5S 1m
Italy
• VOLEX IT10S3+HO3VV-F+VAC5S 1m
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Table 10. Parts list—3-pin power cords (continued)
Region
P/N
CRU ID
Korea
145000533
*
• VOLEX M2511+KETI IEC+VAC5S 1m
Australia
145000532
145000531
145000530
145000525
145500003
145500015
145500014
145500013
145500011
145500012
145500002
145500000
145500004
145500009
145500008
145500006
145500007
145500005
145500010
145500001
145000579
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
• VOLEX AU10S3+H03VV-F+VAC5S 1m
Taiwan
• VOLEX TW15CS3+VCTF+VAC5S 1m
Japan
• VOLEX VAC5S+VCTF+M755 1m
CE
• VOLEX M2511+HO3VV-F+VAC5S 1m
CCC
• lux 0036+RVV 300/300 0.75/3C+0002 1m
Argentina
• lux 0040+H03VV-F 0.75/3C+0011 1m
Denmark
• lux 0048+H03VV-F 0.75/3C+0011 1m
Switzerland
• lux 0027+H03VV-F 0.75/3C+0011 1m
Brazil
• lux 0034+H03VV-F 0.75/3C+0011 1m
Israel
• lux 0041+H03VV-F 0.75/3C+0011 1m
UL
• lux 0014+SPT-2 60ºC 18/3C+0016 1m
UK
• lux 0031+H03VV-F 0.75/3C+0011 1m
India
• lux 0046+IS694 0.75/3C+0011 1m
Italy
• lux 0029+H03VV-F 0.75/3C+0011 1m
Korea
• lux 0033+H03VV-F 0.75/3C+0011 1m
Australia
• lux 0038+H03VV-F 0.75/3C+0011 1m
Taiwan
• lux 0019+VCTF 0.75/3C+0021 1m
Japan
• lux 0018(E)+VCTF 0.75/3C+0021 1m
Africa
• lux 0044+H03VV-F 0.75/3C+0011 1m
CE
• lux 0033+H03VV-F 0.75/3C+0011 1m
CCC
• LINETEK PC323+RVV300/300+LS15 1m white
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Table 10. Parts list—3-pin power cords (continued)
Region
P/N
CRU ID
Argentina
145000584
145000583
145000582
145000581
145000580
145000578
145000577
145000576
145000575
145000574
145000573
145000572
145000571
145000570
145000569
*
• LINETEK LS15+H03VV-F+LP39 1m white
Denmark
• LINETEK LS15+H03VV-F+LP-38 1m white
Switzerland
• LINETEK LS15+H03VV-F+LP-37 1m white
Brazil
• LINETEK LS15 H03VV-F LP26A 1m white
Israel
• LINETEK LS15+H03VV-F+LP-41 1m white
UL
• LINETEK LS15+SPT-2+LP-30B 1m white
UK
• LINETEK LS15+H03VV-F3+LP-61L 1m white
India
• LINETEK LS15+H05VV-F3*0.75+PE-361 1m white
Italy
• LINETEK LS15+H03VV-F+PE-336 1m white
Korea
• LINETEK LS15+H05VV-F+LP-E04A 1m white
Australia
• LINETEK LS15+H03VV-F+LP-23A 1m white
Taiwan
• LINETEK LS15+VCTF+LP-53 1m white
Japan
• LINETEK LS15+VCTF+LP-54 1m white
Africa
• LINETEK LS15+H03VV-F+PE-364 1m white
CE
*
*
*
*
*
*
*
*
*
*
*
*
*
*
• LINETEK LS15+H03VV-F+LP-34 1m white
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Table 11. Parts list—2-pin power cords
Region
P/N
CRU ID
CCC
145500018
*
• LINETEK PC205+RVV 0.75/2C+LS7H 1m
ARGENTINA
• LINETEK LP40+H03VVH2-F+LS7H 1m
BRAZIL
• LINETEK LP25+H03VVH2-F+LS7H 1m
ISRAEL
• LINETEK LP45+H03VV-F+LS7H 1m
UL
• LINETEK LP5+SPT-2 #18/2C+ LS7H 1m
UK
• LINETEK LP61L+H03VVH2-F+ LS7H 1m
India
• LINETEK LP28+IS:694 0.75/2C+ LS7H 1m
Korea
• LINETEK LPE03A+H03VVH2-F+LS7H 1m
Australia
• LINETEK LP15A+H03VVH2-F+LS7H 1m
Taiwan
• LINETEK LP51A+VCTFK 0.75/2C+LS7H 1m
Japan
• LINETEK LP51A+HVCTFK 0.75/2C+LS7H 1m
Africa
• LINETEK PE364(“O”)+H03VVH2-F+LS7H 1m
CE
• LINETEK LP21+H03VVH2-F+ LS7H 1m
CCC
• Longwell LSG-21+RVV300/300+LS-72 1m
ARGENTINA
• Longwell LP-16+H03VVH2-F+LS-7 1m
BRAZIL
• Longwell LP-18A+H03VVH2-F+LS-18 1m
ISRAEL
145500030
145500028
145500029
145500021
145500019
145500020
145500025
145500023
145500027
145500026
145500024
145500022
145500069
145500070
145500071
145500072
145500073
145500074
145500075
145500076
145500077
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
• Longwell LP-55+H03VVH2-F+LS-7 1m
UL
• Longwell LP-11+SPT-2+LS-7C/7J 1m
UK
• Longwell LP-61L+H03VVH2-F+ LS-7 1m
India
• Longwell LP-77+Longwell-p 2X+LS-7 1m
Korea
• Longwell LP-57+H03VVH2-F+LS-7KS 1m
Australia
• Longwell LP-15A+LFC-2F+LS-7 1m
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710
Table 11. Parts list—2-pin power cords (continued)
Region
P/N
CRU ID
Taiwan
145500078
145500079
145500080
145500081
*
• Longwell LP-70+VCTFK+LS-31 1m
Japan
• Longwell LP-51A+VCTFK+LS-7C/7J 1m
Africa
• Longwell LP-39+H03VVH2-F+LS-7 1m
CE
*
*
*
• Longwell LP-21+ H03VVH2-F+LS-7 1m
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo Z710 Hardware Maintenance Manual
Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any
Lenovo intellectual property right may be used instead. However, it is the user’s
responsibility to evaluate and verify the operation of any other product,
program, or service.
Lenovo may have patents or pending patent applications covering subject
matter described in this document. The furnishing of this document does not
give you any license to these patents.
LENOVO GROUP LTD. PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimer of express or implied
warranties in certain transactions, therefore, this statement may not apply to
you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. Lenovo may make
improvements and/or changes in the product(s) and/or the program(s)
described in this publication at any time without notice.
The products described in this document are not intended for use in
implantation or other life support applications where malfunction may result in
injury or death to persons. The information contained in this document does not
affect or change Lenovo product specifications or warranties. Nothing in this
document shall operate as an express or implied license or indemnity under the
intellectual property rights of Lenovo or third parties. All information contained
in this document was obtained in specific environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those
Web sites. The materials at those Web sites are not part of the materials for this
Lenovo product, and use of those Web sites is at your own risk.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments
may vary significantly. Some measurements may have been made on
development-level systems and there is no guarantee that these measurements
will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results
may vary. Users of this document should verify the applicable data for their
specific environment.
Trademarks
The following terms are trademarks or registered trademarks of Lenovo in the
United States, other countries, or both.
Lenovo
IdeaPad
OneKey
Microsoft and Windows are trademarks of Microsoft Corporation in the United
States, other countries, or both.
Other company, products, or service names may be trademarks or service marks
of others.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
|