IdeaPad Y560
Hardware
Maintenance
Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
About this manual
This manual contains service and reference information for the following
Lenovo IdeaPad product:
Lenovo IdeaPad Y560
Use this manual to troubleshoot problems.
The manual is divided into the following sections:
•
The common sections provide general information, guidelines, and safety
information required for servicing computers.
•
The product-specific section includes service, reference, and product-specific
parts information.
Important:
This manual is intended only for trained servicers who are familiar with Lenovo
IdeaPad products. Use this manual to troubleshoot problems effectively.
Before servicing a Lenovo IdeaPad product, make sure to read all the information
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
General safety
Follow these rules below to ensure general safety:
•
Observe a good housekeeping in the area where the machines are put
during and after the maintenance.
•
When lifting any heavy object:
1. Make sure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt
to lift it.
4. Lift it by standing or pushing up with your leg muscles; this action could
avoid the strain from the muscles in your back. Do not attempt to lift any
object that weighs more than 16 kg (35 lb) or that you think is too heavy
for you.
•
•
•
•
•
Do not perform any action that causes hazards to the customer, or that
makes the machine unsafe.
Before you start the machine, make sure that other service representatives
and the customer are not in a hazardous position.
Place removed covers and other parts in a safe place, keeping them away
from all personnel, while you are servicing the machine.
Keep your toolcase away from walk areas so that other people will not trip it
over.
Do not wear loose clothing that can be trapped in the moving parts of the
machine. Make sure that your sleeves are fastened or rolled up above your
elbows. If your hair is long, fasten it.
•
•
Insert the ends of your necktie or scarf inside clothing or fasten it with the
nonconductive clip, about 8 centimeters (3 inches) from the end.
Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for
your clothing.
Attention: Metal objects are good electrical conductors.
•
•
Wear safety glasses when you are hammering, drilling, soldering, cutting
wire, attaching springs, using solvents, or working in any other conditions
that may be hazardous to your eyes.
After service, reinstall all safety shields, guards, labels, and ground wires.
Replace any safety device that is worn or defective.
•
•
Reinstall all covers correctly before returning the machine to the customer.
Fan louvers on the machine help to prevent the overheating of internal
components. Do not obstruct fan louvers or cover them with labels or
stickers.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Electrical safety
Observe the following rules when working on electrical equipments.
Important:
Use only approved tools and test equipments. Some hand tools have handles
covered with a soft material that does not insulate you when working with live
electrical currents.
Many customers have rubber floor mats near their machines that contain small
conductive fibers to decrease electrostatic discharges. Do not use such kind of mat
to protect yourself from electrical shock.
•
Find the room emergency power-off (EPO) switch, disconnecting the switch
or electrical outlet. If an electrical accident occurs, you can then operate the
switch or unplug the power cord quickly.
•
•
Do not work alone under hazardous conditions or near the equipment that
has hazardous voltages.
Disconnect all power before:
–
–
–
Performing a mechanical inspection
Working near power supplies
Removing or installing main units
•
•
Before you start to work on the machine, unplug the power cord. If you
cannot unplug it, ask the customer to power-off the wall box that supplies
power to the machine, and to lock the wall box in the off position.
If you need to work on a machine that has exposed electrical circuits,
observe the following precautions:
–
Ensure that another person, familiar with the power-off controls, is near
you.
Attention: Another person must be there to switch off the power, if
necessary.
–
Use only one hand when working with powered-on electrical equipment;
keep the other hand in your pocket or behind your back.
Attention: An electrical shock can occur only when there is a complete
circuit. By observing the above rule, you may prevent a current from
passing through your body.
–
When using testers, set the controls correctly and use the approved
probe leads and accessories for that tester.
–
Stand on suitable rubber mats (obtained locally, if necessary) to insulate
you from grounds such as metal floor strips and machine frames.
Observe the special safety precautions when you work with very high voltages;
instructions for these precautions are in the safety sections of maintenance
information. Be extremely careful when you measure the high voltages.
•
Regularly inspect and maintain your electrical hand tools for safe operational
condition.
•
•
Do not use worn or broken tools and testers.
Never assume that power has been disconnected from a circuit. First, check
it to make sure that it has been powered off.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
•
•
•
Always look carefully for possible hazards in your work area. Examples of
these hazards are moist floors, nongrounded power extension cables, power
surges, and missing safety grounds.
Do not touch live electrical circuits with the reflective surface of a plastic
dental mirror. The surface is conductive; such touching can cause personal
injury and machine damage.
Do not service the following parts with the power on when they are removed
from their normal operating places in a machine:
–
–
–
–
Power supply units
Pumps
Blowers and fans
Motor generators
and similar units. (This practice ensures correct grounding of the units.)
If an electrical accident occurs:
•
–
–
–
Caution: do not become a victim yourself.
Switch off the power.
Send the victim to get medical aid.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety inspection guide
The purpose of this inspection guide is to assist you in identifying potential
unsafe conditions. As each machine was designed and built, required safety
items were installed to protect users and service personnel from injury. This
guide addresses only those items. You should use good judgment to identify
potential safety hazards according to the attachment of non-Lenovo IdeaPad
features or options not covered by this inspection guide.
If any unsafe conditions are present, you must determine how serious the
apparent hazard could be and whether you can continue without first correcting
the problem.
Consider these conditions and the safety hazards they present:
•
Electrical hazards, especially primary power (primary voltage on the frame
can cause serious or fatal electrical shock)
•
•
Explosive hazards, such as a damaged CRT face or a bulging capacitor
Mechanical hazards, such as loose or missing hardware
To determine whether there are any potential unsafe conditions, use the
following checklist at the beginning of every service task. Begin the checks with
the power off, and the power cord disconnected.
Checklist:
1. Check exterior covers for damage (loose, broken, or sharp edges).
2. Turn off the computer. Disconnect the power cord.
3. Check the power cord for:
a. A third-wire ground connector in good condition. Use a meter to measure
third-wire ground continuity for 0.1 ohm or less between the external
ground pin and the frame ground.
b. The power cord should be the type specified in the parts list.
c. Insulation must not be frayed or worn.
4. Check for cracked or bulging batteries.
5. Remove the cover.
6. Check for any obvious non-Lenovo IdeaPad alterations. Use good judgment
as to the safety of any non-Lenovo IdeaPad alterations.
7. Check inside the unit for any obvious unsafe conditions, such as metal
filings, contamination, water or other liquids, or signs of fire or smoke
damage.
8. Check for worn, frayed, or pinched cables.
9. Check that the power-supply cover fasteners (screws or rivets) have not
been removed or tampered with.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Handling devices that are sensitive to electrostatic discharge
Any computer part containing transistors or integrated circuits (ICs) should be
considered sensitive to electrostatic discharge (ESD). ESD damage can occur
when there is a difference in charge between objects. Protect against ESD
damage by equalizing the charge so that the machine, the part, the work mat,
and the person handling the part are all at the same charge.
Notes:
1. Use product-specific ESD procedures when they exceed the requirements
noted here.
2. Make sure that the ESD protective devices you use have been certified (ISO
9000) as fully effective.
When handling ESD-sensitive parts:
•
•
•
Keep the parts in protective packages until they are inserted into the product.
Avoid contact with other people.
Wear a grounded wrist strap against your skin to eliminate static on your
body.
•
•
•
Prevent the part from touching your clothing. Most clothing is insulative and
retains a charge even when you are wearing a wrist strap.
Use the black side of a grounded work mat to provide a static-free work
surface. The mat is especially useful when handling ESD-sensitive devices.
Select a grounding system, such as those listed below, to provide protection
that meets the specific service requirement.
Note:
The use of a grounding system to guard against ESD damage is desirable but not
necessary.
–
–
Attach the ESD ground clip to any frame ground, ground braid, or green-
wire ground.
When working on a double-insulated or battery-operated system, use an
ESD common ground or reference point. You can use coax or connector-
outside shells on these systems.
–
Use the round ground prong of the ac plug on ac-operated computers.
Grounding requirements
Electrical grounding of the computer is required for operator safety and correct
system function. Proper grounding of the electrical outlet can be verified by a
certified electrician.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notices: multilingual translations
The safety notices in this section are provided in English, French, German,
Hebrew, Italian, Japanese, and Spanish.
Safety notice 1
Before the computer is powered on after FRU replacement, make sure all screws,
springs, and other small parts are in place and are not left loose inside the
computer. Verify this by shaking the computer and listening for rattling sounds.
Metallic parts or metal flakes can cause electrical shorts.
Avant de remettre l’ordinateur sous tension après remplacement d’une unité en
clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et
bien fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun bruit suspect
ne se produit. Des pièces métalliques ou des copeaux de métal pourraient causer
un court-circuit.
Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird,
muß sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile
fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf
Klappergeräusche geprüft werden. Metallteile oder-splitter können Kurzschlüsse
erzeugen.
Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di una
FRU, accertarsi che tutte le viti, le molle e tutte le altri parti di piccole dimensioni
siano nella corretta posizione e non siano sparse all’interno dell’elaboratore.
Verificare ciò scuotendo l’elaboratore e prestando attenzione ad eventuali rumori;
eventuali parti o pezzetti metallici possono provocare cortocircuiti pericolosi.
Antes de encender el sistema despues de sustituir una FRU, compruebe que
todos los tornillos, muelles y demás piezas pequeñas se encuentran en su sitio
y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema
y escuchando los posibles ruidos que provocarían. Las piezas metálicas pueden
causar cortocircuitos eléctricos.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Safety notice 2
DANGER
Some standby batteries contain a small amount of nickel and cadmium. Do not
disassemble a standby battery, recharge it, throw it into fire or water, or short-
circuit it. Dispose of the battery as required by local ordinances or regulations.
Use only the battery in the appropriate parts listing. Use of an incorrect battery can
result in ignition or explosion of the battery.
Certaines batteries de secours contiennent du nickel et du cadmium. Ne les
démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne
les mettez pas en court-circuit. Pour les mettre au rebut, conformez-vous à la
réglementation en vigueur. Lorsque vous remplacez la pile de sauvegarde ou celle
de l’horloge temps réel, veillez à n’utiliser que les modèles cités dans la liste de
pièces détachées adéquate. Une batterie ou une pile inappropriée risque de prendre
feu ou d’exploser.
Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet,
kann geringe Mengen Nickel und Cadmium enthalten. Sie darf nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden.
Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Bereitschafts-oder Systembatterie nur Batterien des Typs verwenden,
der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu
Entzündung oder Explosion führen.
Alcune batterie di riserva contengono una piccola quantità di nichel e cadmio.
Non smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né cortocircuitarle.
Smaltirle secondo la normativa in vigore (DPR 915/82, successive disposizioni e
disposizioni locali). Quando si sostituisce la batteria dell’RTC (real time clock) o
la batteria di supporto, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo
parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o
l’esplosione della batteria stessa.
Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio.
No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite.
Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se
encuentren en la lista de piezas. La utilización de una batería no apropiada puede
provocar la ignición o explosión de la misma.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notice 3
DANGER
The battery pack contains small amounts of nickel. Do not disassemble it, throw
it into fire or water, or short-circuit it. Dispose of the battery pack as required by
local ordinances or regulations. Use only the battery in the appropriate parts listing
when replacing the battery pack. Use of an incorrect battery can result in ignition
or explosion of the battery.
La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Ne la mettez pas en court-circuit. Pour la mettre au rebut, conformez-vous à la
réglementation en vigueur. Lorsque vous remplacez la batterie, veillez à n’utiliser
que les modèles cités dans la liste de pièces détachées adéquate. En effet, une
batterie inappropriée risque de prendre feu ou d’exploser.
Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden.
Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste
aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion
führen.
La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel fuoco
o nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in vigore (DPR
915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la
batteria, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego
di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della
batteria stessa.
Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni
recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como
dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de
piezas al sustituir la batería. La utilización de una batería no apropiada puede
provocar la ignición o explosión de la misma.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Safety notice 4
DANGER
The lithium battery can cause a fire, an explosion, or a severe burn. Do not
recharge it, remove its polarized connector, disassemble it, heat it above 100°C
(212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as
required by local ordinances or regulations. Use only the battery in the appropriate
parts listing. Use of an incorrect battery can result in ignition or explosion of the
battery.
La pile de sauvegarde contient du lithium. Elle présente des risques d’incendie,
d’explosion ou de brûlures graves. Ne la rechargez pas, ne retirez pas son
connecteur polarisé et ne la démontez pas. Ne l’exposez pas à une temperature
supérieure à 100°C, ne la faites pas brûler et n’en exposez pas le contenu à l’eau.
Mettez la pile au rebut conformément à la réglementation en vigueur. Une pile
inappropriée risque de prendre feu ou d’exploser.
Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren
oder schwere Verbrennungen hervorrufen. Batterien dieses Typs dürfen nicht
aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden. Auch darf ihr
Inhalt nicht mit Wasser in Verbindung gebracht oder der zur richtigen Polung
angebrachte Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen
Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien
des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher
Batterien kann zu Entzündung oder Explosion führen.
La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o
procurare gravi ustioni. Evitare di ricaricarla, smontarne il connettore polarizzato,
smontarla, riscaldarla ad una temperatura superiore ai 100 gradi centigradi,
incendiarla o gettarla in acqua. Smaltirla secondo la normativa in vigore (DPR
915/82, successive disposizioni e disposizioni locali). L’impiego di una batteria
non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa.
La batería de repuesto es una batería de litio y puede provocar incendios,
explosiones o quemaduras graves. No la recargue, ni quite el conector polarizado,
ni la desmonte, ni caliente por encima de los 100°C (212°F), ni la incinere ni
exponga el contenido de sus celdas al agua. Deséchela tal como dispone la
normativa local.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notice 5
If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your
hands, immediately wash the affected areas with water at least for 15 minutes.
Seek medical care if any symptoms caused by the fluid are present after washing.
Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les
yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au
moins quinze minutes. Consultez un médecin si des symptômes persistent après le
lavage.
Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung
die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm
besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird
oder der Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und
die darin befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten
die betroffenen Stellen mindestens 15 Minuten mit Wasser abgespült und bei
Beschwerden anschließend ein Arzt aufgesucht werden.
Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto
entrasse in contatto con gli occhi o le mani, lavare immediatamente le parti
interessate con acqua corrente per almeno 15 minuti; poi consultare un medico se i
sintomi dovessero permanere.
Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o sus
manos, lave inmediatamente las áreas afectadas con agua durante 15 minutos
como mínimo. Obtenga atención medica si se presenta algún síntoma del fluido
despues de lavarse.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Safety notice 6
DANGER
To avoid shock, do not remove the plastic cover that protects the lower part of the
inverter card.
Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique
protégeant la partie inférieure de la carte d’alimentation.
Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der
Spannungswandlerplatine umgibt, nicht entfernen.
Per evitare scosse elettriche, non rimuovere la copertura in plastica che avvolge la
parte inferiore della scheda invertitore.
Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la
tarjeta invertida.
Safety notice 7
DANGER
Though the main batteries have low voltage, a shorted or grounded battery can
produce enough current to burn personnel or combustible materials.
Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la
mise à la masse d’une batterie peut produire suffisamment de courant pour brûler
des matériaux combustibles ou causer des brûlures corporelles graves.
Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei
Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien zu
entzünden oder Verletzungen bei Personen hervorzurufen.
Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in
corto circuito o a massa può fornire corrente sufficiente da bruciare materiali
combustibili o provocare ustioni ai tecnici di manutenzione.
Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada
o con contacto a tierra puede producir la corriente suficiente como para quemar
material combustible o provocar quemaduras en el personal.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
Safety notice 8
DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, remove the battery pack, and then disconnect any interconnecting
cables.
Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension,
débranchez tous les cordons d’alimentation des socles de prise de courant, retirez
la batterie et déconnectez tous les cordons d’interface.
Die Stromzufuhr muß abgeschaltet, alle Stromkabel aus der Steckdose gezogen,
der Akku entfernt und alle Verbindungskabel abgenommen sein, bevor eine FRU
entfernt wird.
Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese
elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare i cavi
di interconnessione.
Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de
las tomas de corriente eléctrica, quite la batería y, a continuación, desconecte
cualquier cable de conexión entre dispositivos.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Laser compliance statement
Some models of Lenovo IdeaPad computer are equipped from the factory with
an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such
devices are also sold separately as options. If one of these drives is installed,
it is certified in the U.S. to conform to the requirements of the Department of
Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR)
Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to
conform to the requirements of the International Electrotechnical Commission
(IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note
the following:
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
O uso de controles, ajustes ou desempenho de procedimentos diferentes daqueles
aqui especificados pode resultar em perigosa exposição à radiação.
Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de
réglage et d’utilisation des commandes, ainsi que les procédures décrites.
Werden Steuer- und Einstellelemente anders als hier festgesetzt verwendet, kann
gefährliche Laserstrahlung auftreten.
L’utilizzo di controlli, regolazioni o l’esecuzione di procedure diverse da quelle
specificate possono provocare l’esposizione a.
El uso de controles o ajustes o la ejecución de procedimientos distintos de los aquí
especificados puede provocar la exposición a radiaciones peligrosas.
Opening the CD-ROM drive, the DVD-ROM drive, or any other optical storage
device could result in exposure to hazardous laser radiation. There are no
serviceable parts inside those drives. Do not open.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may
contain an embedded Class 3A or Class 3B laser diode. Note the following:
DANGER
Emits visible and invisible laser radiation when open. Do not stare into the beam,
do not view directly with optical instruments, and avoid direct exposure to the
beam.
Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe
diretamente por meio de instrumentos óticos e evite exposição direta com o feixe
de luz.
Rayonnement laser si carter ouvert. Évitez de fixer le faisceau, de le regarder
directement avec des instruments optiques, ou de vous exposer au rayon.
Laserstrahlung bei geöffnetem Gerät. Nicht direkt oder über optische Instrumente
in den Laserstrahl sehen und den Strahlungsbereich meiden.
Kinyitáskor lézersugár ! Ne nézzen bele se szabad szemmel, se optikai
eszközökkel. Kerülje a sugárnyalábbal való érintkezést!
Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non
guardarlo direttamente con strumenti ottici e evitare l’esposizione diretta al fascio.
Radiación láser al abrir. No mire fijamente ni examine con instrumental óptico el
haz de luz. Evite la exposición directa al haz.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Important service information
This chapter presents the following important service information:
•
–
–
•
Important:
BIOS and device driver fixes are customer-installable. The BIOS and device
drivers are posted on the customer support site:
http://consumersupport.lenovo.com/.
Strategy for replacing FRUs
Before replacing parts:
Make sure that all software fixes, drivers, and BIOS downloads are installed
before replacing any FRUs listed in this manual.
After a system board is replaced, ensure that the latest BIOS is loaded to the
system board before completing the service action.
To download software fixes, drivers, and BIOS, follow the steps below:
1. Go to http://consumersupport.lenovo.com/.
2. Enter a serial number or select a product or use Lenovo smart downloading.
3. Select the BIOS/Driver/Applications and download.
4. Follow the directions on the screen and install the necessary software.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Important service information
Use the following strategy to prevent unnecessary expense for replacing and
servicing FRUs:
•
If you are instructed to replace an FRU, but the replacement does not solve
the problem, reinstall the original FRU before you continue.
•
Some computers have both a processor board and a system board. If you
are instructed to replace either of them, and replacing one of them does not
solve the problem, reinstall that board, and then replace the other one.
•
If an adapter or a device consists of more than one FRU, any of the FRUs
may be the cause of the error. Before replacing the adapter or device,
remove the FRUs one by one to see if the symptoms change. Replace only
the FRU that changed the symptoms.
Attention: The setup configuration on the computer you are servicing may
have been customized. Running Automatic Configuration may alter the
settings. Note the current configuration settings (using the View Configuration
option); then, when service has been completed, verify that those settings
remain in effect.
Strategy for replacing a hard disk drive
Always try to run a low-level format before replacing a hard disk drive. This
will cause all customer data on the hard disk to be lost. Make sure that the
customer has a current backup of the data before performing this action.
Attention: The drive startup sequence in the computer you are servicing may
have been changed. Be extremely careful during write operations such as
copying, saving, or formatting. If you select an incorrect drive, data or programs
can be overwritten.
Important notice for replacing a system board
Some components mounted on a system board are very sensitive. Improper
handling can cause damage to those components, and may cause a system
malfunction.
Attention: When handling a system board:
•
•
•
Do not drop the system board or apply any excessive force to it.
Avoid rough handling of any kind.
Avoid bending the system board and hard pushing to prevent cracking at
each BGA (Ball Grid Array) chipset.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Important information about replacing RoHS compliant FRUs
RoHS, The Restriction of Hazardous Substances in Electrical and
Electronic Equipment Directive (2002/95/EC) is a European Union legal
requirement affecting the global electronics industry. RoHS requirements
must be implemented on Lenovo products placed on the market after
June 2006. Products on the market before June 2006 are not required to
have RoHS compliant parts. If the original FRU parts are non-compliant,
replacement parts can also be non-compliant. In all cases if the original
FRU parts are RoHS compliant, the replacement part must also be RoHS
compliant.
Note: RoHS and non-RoHS FRU part numbers with the same fit and function
are identified with unique FRU part numbers.
Lenovo plans to transit to RoHS compliance well before the implementation
date and expects its suppliers to be ready to support Lenovo’s requirements
and schedule in the EU. Products sold in 2005 and 2006 will contain some
RoHS compliant FRUs. The following statement pertains to these products and
any product Lenovo produces containing RoHS compliant FRUs.
RoHS compliant FRUs have unique FRU part numbers. Before or after the
RoHS implementation date, failed RoHS compliant parts must always be
replaced with RoHS compliant ones, so only the FRUs identified as compliant
in the system HMM or direct substitutions for those FRUs may be used.
Products marketed before June 2006 Products marketed after June 2006
Current or
original part
Replacement FRU Current or
original part
Replacement FRU
Non-RoHS
Non-RoHS
Non-RoHS
RoHS
Can be Non-RoHS
Can be RoHS
Must be RoHS
Can sub to RoHS
Must be RoHS
Must be RoHS
Note: A direct substitution is a part with a different FRU part number that is
automatically shipped by the distribution center at the time of the order.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
General checkout
General checkout
This chapter presents the following information:
•
•
Before you go to the checkout, make sure to read the following important notes:
Important notes:
• Only certified trained personnel can service the computer.
• Before replacing any FRU, read the entire page on removing and replacing
FRUs.
• When you replace FRUs, use new nylon-coated screws.
• Be extremely careful during such write operations as copying, saving, or
formatting. Drives in the computer that you are servicing sequence might
have been altered. If you select an incorrect drive, data or programs might be
overwritten.
• Replace an FRU only with another FRU of the correct model. When you
replace an FRU, make sure that the machine model and the FRU part number are
correct by referring to the FRU parts list.
• An FRU should not be replaced just because of a single, unreproducible
failure. Single failures can occur for a variety of reasons that have nothing to
do with a hardware defect, such as cosmic radiation, electrostatic discharge, or
software errors. Consider replacing an FRU only when a problem recurs. If you
suspect that an FRU is defective, clear the error logs and run the test again. If the
error does not recur, do not replace the FRU.
• Be careful not to replace a nondefective FRU.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
What to do first
When you do return an FRU, you must include the following information in the
parts exchange form or parts return form that you attach to it:
1. Name and phone number of servicer
2. Date of service
3. Date on which the machine failed
4. Date of purchase
5. Procedure index and page number in which the failing FRU was detected
6. Failing FRU name and part number
7. Machine type, model number, and serial number
8. Customer’s name and address
Note for warranty: During the warranty period, the customer may be
responsible for repair costs if the computer damage was caused by misuse,
accident, modification, unsuitable physical or operating environment, or
improper maintenance by the customer.
The following is a list of some common items that are not covered under
warranty and some symptoms that might indicate that the system was
subjected to stress beyond normal use.
Before checking problems with the computer, determine whether the damage is
covered under the warranty by referring to the following list:
The following are not covered under warranty:
•
LCD panel cracked from the application of excessive force or from being
dropped
•
•
•
Scratched (cosmetic) parts
Distortion, deformation, or discoloration of the cosmetic parts
Plastic parts, latches, pins, or connectors that have been cracked or broken
by excessive force
•
•
Damage caused by liquid spilled into the system
Damage caused by the improper insertion of a PC Card or the installation of
an incompatible card
•
•
Improper disc insertion or use of an optical drive
Diskette drive damage caused by pressure on the diskette drive cover,
foreign material in the drive, or the insertion of a diskette with multiple labels
•
•
•
•
•
Damaged or bent diskette eject button
Fuses blown by attachment of a nonsupported device
Forgotten computer password (making the computer unusable)
Sticky keys caused by spilling a liquid onto the keyboard
Use of an incorrect AC adapter on laptop products
The following symptoms might indicate damage caused by nonwarranted
activities:
•
•
Missing parts might be a symptom of unauthorized service or modification.
If the spindle of a hard disk drive becomes noisy, it may have been subjected
to excessive force, or dropped.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
General checkout
Power system checkout
To verify a symptom, follow the steps below:
1. Turn off the computer.
2. Remove the battery pack.
3. Connect the AC adapter.
4. Make sure that power is supplied when you turn on the computer.
5. Turn off the computer.
6. Disconnect the AC adapter and install the charged battery pack.
7. Make sure that the battery pack supplies power when you turn on the
computer.
If you suspect a power problem, see the appropriate one of the following power
supply checkouts:
•
•
•
Checking the AC adapter
You are here because the computer fails only when the AC adapter is used.
•
•
If the power-on indicator does not turn on, check the power cord of the AC
adapter for correct continuity and installation.
If the computer does not charge during operation, go to “Checking
To check the AC adapter, follow the steps below:
1. Unplug the AC adapter cable from the computer.
2. Measure the output voltage at the plug of the AC adapter cable. See the
following figure:
Pin
1
Voltage (V DC)
+20
0
2
2
1
Note: Output voltage for the AC adapter pin No. 2 may differ from the one you
are servicing.
3. If the voltage is not correct, replace the AC adapter.
4. If the voltage is acceptable, do the following:
•
•
Replace the system board.
Note: Noise from the AC adapter does not always indicate a defect.
Checking operational charging
To check whether the battery charges properly during operation, use a
discharged battery pack or a battery pack that has less than 50% of the total
power remaining when installed in the computer.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Perform operational charging. If the battery status indicator or icon does not
light on, remove the battery pack and let it return to room temperature. Reinstall
the battery pack. If the charge indicator or icon is still off, replace the battery
pack.
If the charge indicator still does not light on, replace the system board. Then
reinstall the battery pack. If it is still not charged, go to the next section.
Checking the battery pack
Battery charging does not start until the Power Meter shows that less than 95%
of the total power remains; under this condition the battery pack can charge to
100% of its capacity. This protects the battery pack from being overcharged or
from having a shortened life.
To check your battery, move your cursor to the Power Meter icon in the icon
tray of the Windows® taskbar and wait for a moment (but do not click it), and the
percentage of battery power remaining is displayed. To get detailed information
about the battery, double-click the Power Meter icon.
Note: If the battery pack becomes hot, it may not be able to be charged.
Remove it from the computer and leave it at room temperature for a while. After
it cools down, reinstall and recharge it.
To check the battery pack, follow the steps below:
1. Turn off the computer.
2. Remove the battery pack and measure the voltage between battery
terminals 1 (+) and 7 (-). See the following figure:
Terminal
Voltage (V DC)
+0 to +14
1
7
7(-)
6(-)
5
Ground (-)
4
3
2(+)
1(+)
3. If the voltage is less than +11.0 V DC, the battery pack has been
discharged.
Note: Recharging will be continued for at least 3 hours, even though the
indicator does not light on.
If the voltage is still less than +11.0 V DC after recharging, replace the
battery.
4. If the voltage is more than +11.0 V DC, measure the resistance between
battery terminals 5 and 7. The resistance must be 4 to 30 KΩ.
If the resistance is not correct, replace the battery pack. If the resistance is
correct, replace the system board.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Related service information
Related service information
This chapter presents the following information:
•
•
•
Restoring the factory contents by using OneKey Recovery
Restore of factory default
The IdeaPad Y560 computers come with pre-installed OneKey Rescue System.
In order to save application files and the initial backed up files of the system,
the hard disk in a Lenovo computer includes a hidden partition when it is
shipped. If you need to restore the system to the point of your first boot up, just
enter Lenovo OneKey Rescue System and run Restore to factory default. For
the User Guide for OneKey Rescue System
details of OneKey Rescue System, see
.
This will delete all the new data on the system partition (C drive), which
Note:
is not recoverable. Make sure to back up your critical data before you perform this
action.
Using recovery discs
When you replace a hard disk drive in your computer, you are unable to use
the pre-installed Lenovo OneKey Recovery and OneKey Rescue. However, you
can use the recovery discs that store your backed up data to restore your new
hard drive to a previous backup status.
You can create recovery discs by burning the backup image to a CD/DVD
Note:
as recovery discs. For details of Create recovery discs, see the User Guide for
OneKey Rescue System.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
When you use the recovery discs to boot your computer, the system will enter
the user interface for system recovery automatically. Please follow the prompt
to insert the backup discs to complete the whole recovery process.
The recovery process might take up to 2 hours.
Note:
Passwords
As many as two passwords may be needed for any Lenovo IdeaPad computer:
the power-on password (POP) and the supervisor password (SVP).
If any of these passwords has been set, a prompt for it appears on the screen
whenever the computer is turned on. The computer does not start until the
password is entered.
Exception: If only an SVP is installed, the password prompt does not appear
when the operating system is booted.
Power-on password
A power-on password (POP) protects the system from being powered on by
an unauthorized person. The password must be entered before an operating
system can be booted.
Supervisor password
A supervisor password (SVP) protects the system information stored in the
BIOS Setup Utility. The user must enter the SVP in order to get access to the
BIOS Setup Utility and change the system configuration.
Attention: If the SVP has been forgotten and cannot be made available to
the servicer, there is no service procedure to reset the password. The system
board must be replaced for a scheduled fee.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Related service information
Power management
Note: Power management modes are not supported for APM operating system.
To reduce power consumption, the computer has three power management
modes: screen blank, sleep (standby), and hibernation.
Screen blank mode
If the time set on the “Turn off monitor” timer in the operating system expires,
the LCD backlight turns off. You can also turn off the LCD backlight by pressing
Fn+F2.
To end screen blank mode and resume normal operation, press any key.
Sleep (standby) mode
When the computer enters sleep (standby) mode, the following events occur in
addition to what occurs in screen blank mode:
•
•
•
The LCD is powered off.
The hard disk drive is powered off.
The CPU stops.
To enter sleep (standby) mode, press Fn+F1.
In certain circumstances, the computer goes into sleep (standby) mode
automatically:
•
If a “suspend time” has been set on the timer, and the user does not do any
operation with the keyboard, the hard disk, the parallel connector, or the
diskette drive within that time.
•
If the battery indicator is amber, indicating that the battery power is low.
(Alternatively, if Hibernate when battery becomes low has been selected
in the “Power Management Properties” window, the computer goes into
hibernation mode.)
To cause the computer to return from sleep (standby) mode and resume the
operation, do one of the following:
•
•
•
Press the Fn key.
Open the lid.
Turn on the power switch.
Also, in the following event, the computer automatically returns from sleep
(standby) mode and resumes the operation:
•
The time set on the resume timer elapses.
Note: The computer does not accept any input immediately after it enters
sleep (standby) mode. Wait a few seconds before taking any action to reenter
operation mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Hibernation mode
In hibernation mode, the following occurs:
•
•
The system status, RAM, VRAM, and setup data are stored on the hard disk.
The system is powered off.
To cause the computer to enter hibernation mode, follow the steps below:
•
If you are using the ACPI operating system and have defined one of the
following actions as the event that causes the system to go into hibernation
mode, perform that action:
–
–
Closing the lid.
Pressing the power button.
Also, the computer goes into hibernation mode automatically in either of the
following conditions:
•
If a “hibernation time” has been set on the timer, and if the user does not do
any operation with the keyboard, the hard disk drive, the parallel connector,
or the diskette drive within that time.
•
If the timer conditions are satisfied in suspend mode.
When the power is turned on, the computer returns from hibernation mode and
resumes operation. The hibernation file in the boot record on the hard disk drive
is read, and system status is restored from the hard disk drive.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Lenovo IdeaPad Y560
This chapter presents the following product-specific service references and
product-specific parts information:
•
•
•
•
•
•
•
Specifications
The following table lists the specifications of the Lenovo IdeaPad Y560 :
Table 7. Specifications
Feature
Description
Processor
•
Intel® Core™ i7, Quad Core Performance, Clarksfield, 45nm
(Calpella)
•
Intel® Core™ i7/i5/i3, Power Optimized Performance, Arrandale,
32nm (Calpella)
Support latest Intel standard voltage mobile processors
Core Chipset
•
•
•
•
•
•
•
•
Intel HM55 (Calpella)
Bus architecture
DDR3: 800, 1066MT/s for Auburndale
DDR3: 800, 1066, 1333MT/s for Clarksfield
DMI X4, 2.5Gb/s
FDI 8 lanes (2channels), 2.7Gt/s
PCI Express
Graphic memory
chip
AMD Madison XT (DDR3 1G/128bit)
Support Intel-AMD switchable graphics, with ME click switch
design (Arrandale only)
Display
•
15.6-Inch, 16M colors, HD(1366 × 768 Resolution), 16:9,
WLED type, TFT color LCD
Standard
memory
•
•
•
•
•
•
•
•
•
•
1 x 2GB (DDR3)
2 x 2GB (DDR3)
1 x 4GB (DDR3)
2 x 4GB (DDR3)
CMOS RAM
256 bytes
Hard disk drive
250GB, 5400rpm, 9.5 mm high, SATA interface
320GB, 5400rpm, 9.5 mm high, SATA interface
500GB, 5400rpm, 9.5 mm high, SATA interface
320GB, 7200rpm, 9.5 mm high, SATA interface
500GB, 7200rpm, 9.5 mm high, SATA interface
Supported hard disk drives depend on the model.
Optical drive
•
•
•
9.5mm SATA, Fixed Bay, tray-in
DVD Rambo
Blue Ray Combo
27
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Table 7. Specifications (continued)
Feature
Description
I/O port
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
External monitor connector
Stereo headphone jack
Microphone jack
RJ45 x 1 (on planar)
HDMI port
CIR port (for remote controller)
USB2.0 x 3 (on planar)
E-SATA + USB combo x 1 (on planar)
Express Card slot
6-in-1 media card reader
N/A
MODEM slot
Audio
1/8" Stereo Headphone Output Jack/ SPIDIF
1/8" Microphone Input Jack
Built-in stereo speakers
CRT port x 1 (on planar), HDMI port x 1 (on planar)
Video
Ethernet (on the
system board)
•
10/100M Ethernet
PCI Express
Mini Card
•
•
•
Wi-Fi/ WiMax card x 1
TV card x 1
WWAN card x 1(share with SSD slot)
ExpressCard
slot
•
•
34mm width x 1
WLAN
802.16e Wimax
- Intel Kilmer Peak HMC (2x2), US certification only
802.11 a/b/g/n WIFI
•
- Intel AGN Puma Peak HMC (2x2)
- Intel BGN Condor Peak HMC (1x2)
- Non-Intel BGN HMC
WWAN
•
•
Tech ready, selected model
Bluetooth
wireless
BCM92070 BT2.1 EDR, selected model
SSD
•
•
•
•
•
•
•
•
•
•
32G, share with WWAN slot, selected model
Digital/analog, mini-PCIE, worldwide support
With compliant cable/antenna solution
Selected model
TV
Slidebar
Work with Lenovo SlideNav Application
Quick link and launch software
Keyboard
Touch pad
6 row full size Lenovo standard KB
CapsLK and NumLK LED integrated
Yes with two buttons and 1 LED indicator
Gesture function support, Synaptics
Integrated
camera
•
•
1.3 mega slim type with 1 LED indicator
Li-ion battery (6 cells) 2600mAH
Battery
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Table 7. Specifications (continued)
Feature
Description
AC adapter
•
•
•
65W (20V) for UMA
90W/120W (20V) for discreate graphics
Pre-installed
operating
system
Windows 7 (Home Basic/Premium/Professional /Ultimate
X86/X64)
•
•
•
Windows XP Home/Pro + SP3 (mini support)
Windows Vista SP2 Mini Support
DOS
29
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Status indicators
The system status indicators below show the computer status:
1
2
3
4
5
8
9
6
7
Table 8. Status indicators
Indicator
Meaning
White:
Data is being read from or written to the hard disk
drive, the solid state drive, or the optical disk drive.
When this indicator is on, do not put the computer
into standby mode or turn off the computer.
Drive in use
1
Note: Do not move the system while the white drive-in-use
light is on. Sudden physical shock could cause drive errors.
White:
The bluetooth is switched on or the bluetooth radio
is turned on or the bluetooth radio is turned on and
connected to AP.
Bluetooth
2
Flashing white:
User data is being transferred by bluetooth.
Off:
The bluetooth is switched off.
White:
The wireless LAN radio is turned on and connected
to AP.
WLAN
3
Blinking white:
The wireless LAN is switched on and the radio of
it is also turned off, or the wireless LAN radio is
turned on and not connected to AP.
Flashing white:
The wireless LAN radio is turned on and data is
being transmitted.
Off:
The wireless LAN is switched off and the radio of it
is also turned off.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Table 8. Status indicators (continued)
Indicator
Meaning
White:
Num lock
The numeric keypad on the keyboard is enabled.
To enable or disable the keypad, press and hold
the Fn key, and press the F8(NumLk) key.
4
Caps lock
White:
Caps Lock mode is enabled. You can enter all
alphabetic characters (A-Z) in uppercase without
pressing the Shift key. To enable or disable Caps
Lock mode, press the CapsLk key.
5
Power on
White:
System is enabled.
6
7
Blinking white:
System is in sleep mode.
System is in hibernate mode or shut down.
Battery status Blinking amber: (500ms off/1s on)
The remaining power of the battery is less than 5%
Off:
of its capacity.
Blinking amber: (100ms off/3.2s on)
The battery is being charged with the remaining
power between 5% and 20% of its capacity.
Amber:
The computer is operating on battery power with
the remaining power between 5% and 20% of its
capacity.
Blinking white:
The battery is being charged with the remaining
power between 20% and 80% of its capacity.
White:
The remaining power of the battery is more than
80% of its capacity, or the computer is operating on
battery power with the remaining power between
20% and 80% of its capacity.
Touchpad
White:
The touchpad is disabled. To enable or disable the
touchpad, press and hold the Fn key, and press
the F6 key.
8
9
Graphics
status
(specific
models only)
White:
Off:
The graphics is switched to a dedicated AMD GPU
(high-performance GPU).
The graphics is switched to an integrated Intel
GPU (power-saving GPU).
*GPU is short for graphics processing unit.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Fn key combinations
The following table shows the function of each combination of Fn with a
function key.
Table 10. Fn key combinations
Key combination
Description
Fn + Esc
Fn + F1
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Turn on/off the integrated camera.
Enter sleep mode.
Turn on/off the backlight for the LCD screen.
Shift to other connected display devices.
Open the interface for display resolution settings.
Open the interface for integrated wireless devices settings
(enable/disable).
Fn + F6
Enable/Disable the touchpad.
Fn + F7
Start/Pause playback of Windows Media Player.
Enable/Disable the numeric keypad.
Activate the pause function.
Fn + F8
Fn + F9
Fn + F10
Fn + F11
Fn + F12
Fn + PrtSc
Activate the break function.
Enable/Disable the Scroll Lock.
Turn on/off the insert input.
Activate the system request.
↑ ↓
Fn + /
Increase/Decrease display brightness.
Decrease/Increase volume level.
← →
Fn +
/
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
FRU replacement notices
This section presents notices related to removing and replacing parts. Read
this section carefully before replacing any FRU.
Screw notices
Loose screws can cause a reliability problem. In the Lenovo IdeaPad computer,
this problem is addressed with special nylon-coated screws that have the
following characteristics:
•
•
•
•
They maintain tight connections.
They do not easily come loose, even with shock or vibration.
They are harder to tighten.
Each one should be used only once.
Do the following when you service this machine:
•
•
•
Keep the screw kit in your tool bag.
Always use new screws.
Use a torque screwdriver if you have one.
Tighten screws as follows:
•
Plastic to plastic
Turn an additional 90° after the screw head touches the surface of the
plastic part:
more than 90°
(Cross-section)
•
Logic card to plastic
Turn an additional 180° after the screw head touches the surface of the
logic card:
more than 180°
(Cross-section)
Torque driver
•
•
If you have a torque screwdriver , refer to the “Torque” column for each step.
Make sure that you use the correct screws. If you have a torque screwdriver,
tighten all screws firmly to the torque shown in the table. Never use a
screw that you removed. Use a new one. Make sure that all screws are
tightened firmly.
•
Ensure torque screwdrivers are calibrated correctly following country
specifications.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Removing and replacing an FRU
This section presents exploded figures with the instructions to indicate how to
remove and replace the FRU. Make sure to observe the following general rules:
1. Do not attempt to service any computer unless you have been trained and
certified. An untrained person runs the risk of damaging parts.
3. Begin by removing any FRUs that have to be removed before the failing
FRU. Any of such FRUs are listed at the top of the page. Remove them in
the order in which they are listed.
4. Follow the correct sequence in the steps to remove the FRU, as given in the
figures by the numbers in square callouts.
5. When turning a screw to replace an FRU, turn it in the direction as given by
the arrow in the figure.
6. When removing the FRU, move it in the direction as given by the arrow in
the figure.
7. To put the new FRU in place, reverse the removal procedures and follow
any of the notes that pertain to replacement. For information about
8. When replacing an FRU, use the correct screw as shown in the procedures.
DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, remove the battery pack, and then disconnect any of the
interconnecting cables.
Attention: After replacing an FRU, do not turn on the computer until you have
made sure that all screws, springs, and other small parts are in place and none
are loose inside the computer. Verify this by shaking the computer gently and
listening for rattling sounds. Metallic parts or metal flakes can cause electrical
short circuits.
Attention: The system board is sensitive to, and can be damaged by,
electrostatic discharge. Before touching it, establish personal grounding by
touching a ground point with one hand or using an electrostatic discharge (ESD)
strap (P/N 6405959) to remove potential shock reasons.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1010 Battery pack
DANGER
Only use the battery specified in the parts list for your computer. Any other battery
could ignite or explode.
Figure 1. Removal steps of battery pack
Unlock the battery release lever . Holding the battery release lever in the
1
unlocked position , remove the battery pack in the direction shown by arrow
2
.
3
3
2
1
When installing: Install the battery pack along the slide rails of the slot. Then
make sure that the battery release lever is in the locked position.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1030 Hard disk drive (HDD) slot cover and HDD
For access, remove this FRU:
•
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damages
and permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information on
it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Figure 3. Removal steps of HDD slot cover and HDD
Note: Loosen the screws , but do not remove them.
1
Remove the HDD slot cover in the direction shown by arrow
.
2
1
1
1
2
37
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 3. Removal steps of HDD slot cover and HDD (continued)
Remove the screw , pull the tab up in the direction shown by arrows
to
4 5
3
remove the hard disk drive from the slot.
3
4
5
Step
Screw (quantity)
Color
Torque
2.0±0.2 kgfcm
M2.5 × 4 mm, flat-head, nylok-coated (1)
Black
3
When installing: Make sure that the HDD connector is attached firmly.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1040 Optical drive
For access, remove this FRU in the order:
•
Figure 4. Removal steps of optical drive
Remove the screw , insert a screwdriver into the hole aside and push the
1
optical drive in the direction shown by arrow , then pull the optical drive out in
2
the direction shown by arrow
.
3
1
Step
Screw (quantity)
Color
Torque
M2.5 × 6.5 mm, flat-head, nylok-coated (1) Black
2.5±0.2 kgfcm
1
2
3
39
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
1050 Thermal slot cover
For access, remove this FRU in order:
•
Figure 5. Removal steps of thermal slot cover
Note: Loosen the screws , but do not remove them.
1
Remove the thermal slot cover in the direction shown by arrow
.
2
1
1
1
1
2
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1060 DIMM
For access, remove this FRU in order:
•
•
Figure 6. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
direction shown by arrows , and then unplug the DIMM in the direction shown
1
by arrow
.
2
1
2
1
Note: If only one DIMM is used on the computer you are servicing, the card
a
b
must be installed in SLOT-0 (
slot).
: lower slot), but not in SLOT-1 (
: upper
b
a
When installing: Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly
fixed in the slot and difficult to be moved.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
1070 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
•
•
Figure 7. Removal steps of fan assembly and heat sink assembly
Note: Loosen the screws , but do not remove them.
1 2
Unplug the connector in the direction shown by arrow
.
3
1
1
1
2
1
1
1
3
When installing: Make sure that the fan connector is attached firmly to the
system board.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 7. Removal steps of fan assembly and heat sink assembly (continued)
Lift the fan assembly and heat sink assembly in the direction shown by arrow
Be careful not to damage the connector.
.
4
4
Attention: Do not handle the heat sink assembly roughly. Improper handling
can cause distortion or deformation and imperfect contact with components.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 7. Removal steps of fan assembly and heat sink assembly (continued)
Loosen two screws
to detach the fan assembly and the heat sink assembly.
5
c
5
a
b
5
When installing:
•
Before you attach the fan assembly to the computer, apply thermal grease,
a
b
at an amount of 0.2 grams, to the
part shown in the figure above. Either
too much or too less grease application can cause a thermal problem due
to imperfect contact with a component. In models with the discrete graphics
c
chip, there is an additional thermal rubber whose film to be peeled off.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1080 CPU
For access, remove these FRUs in order:
•
•
•
Attention: CPU is extremely sensitive. When you service the CPU, avoid any
kind of rough handling.
Figure 8. Removal steps of CPU
Rotate the head of the screw in the direction shown by arrow
to release the
1
lock, then remove the CPU in the direction shown by arrow
.
2
1
a
b
2
When installing: Place the CPU on the CPU socket in the direction shown by
a
arrow , and then rotate the head of the screw in the direction shown by arrow
b
to secure the CPU.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1100 SIM card for Mobile Broadband
For access, remove these FRUs in order:
•
•
Figure 10. Removal steps of SIM card for Mobile Broadband
Remove the SIM card in the direction shown by arrows
.
1 2
1
2
When installing:
Make sure that the beveled corner on the SIM card is inserted last and that the
golden contact area on the card faces downward.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
1110 PCI Express Mini Card for wireless LAN/WAN and TV card
For access, remove these FRUs in order:
•
•
•
Figure 11. Removal steps of PCI Express Mini Card for wireless LAN/WAN and
TV card
2
2
1
Disconnect the two wireless LAN cables (black, white) , and then remove the
1
screws
.
2
In step , unplug the jacks by using the removal tool antenna RF connector
1
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by arrows.
Notes: wireless LAN card has 2 cables in step
.
1
wireless LAN card in some models may have 3 cables in step
.
1
Step
Screw (quantity)
Color
Torque
M2.5 × 4 mm, flat-head, nylok-coated (2)
Black
2.0±0.2 kgfcm
2
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 11. Removal steps of PCI Express Mini Card for wireless LAN/WAN and
TV card (continued)
Remove the card in the direction shown by arrow
.
3
3
When installing:
•
In models with a wireless LAN card that has two antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled 1, and the white cable (2nd)
(AUX) into jack labeled 2 on the card.
•
In models with a wireless LAN card that has three antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into
jack labeled 3, and the white cable (2nd) (AUX) into jack labeled 2 on the
card.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 11. Removal steps of PCI Express Mini Card for wireless LAN/WAN and
TV card (continued)
Disconnect the TV card cable (grey)
and remove two screws
.
5
4
5
5
4
In step , unplug the jack by using the removal tool antenna RF connector (P/N:
4
08K7159), or pick up the connector with your fingers and gently unplug it in the
direction shown by the arrow.
Step
Screw (quantity)
Color
Torque
M2.5 × 4 mm, flat-head, nylok-coated (2)
Black
2.0±0.2 kgfcm
5
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 11. Removal steps of PCI Express Mini Card for wireless LAN/WAN and
TV card (continued)
Remove the TV card in the direction shown by arrow
.
6
6
51
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
1120 Keyboard cover, system status indicator board and
touch inductive panel
For access, remove this FRU:
•
Note: System status indicator board is attached to the keyboard cover.
Figure 12. Removal steps of keyboard cover, system status indicator board and
touch inductive panel
Remove the screws
.
1 2
2
2
1
1
2
1
1
2
Step
Screw (quantity)
Color
Black
Black
Torque
M2.5 × 2 mm, flat-head, nylok-coated (4)
M2.5 × 6.5 mm, flat-head, nylok-coated (4)
1.5±0.2 kgfcm
2.5±0.2 kgfcm
1
2
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 12. Removal steps of keyboard cover, system status indicator board and
touch inductive panel (continued)
Open the LCD at an angle about 120°.
Lift the keyboard cover with fingers in the direction shown by arrows
.
3 4
4
4
4
4
4
4
3
53
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 12. Removal steps of keyboard cover, system status indicator board and
touch inductive panel (continued)
Turn the keyboard cover over in the direction shown by arrow , detach the
5
two FPC connectors in the direction shown by arrows
the keyboard cover.
, and then remove
6 7
6
7
7
6
5
When installing: Make sure that the FPC connectors are attached firmly.
Remove the screw , and then remove the system status indicator board in
8
the direction shown by arrow
.
9
8
9
Step
Screw (quantity)
M2.5 × 2 mm, flat-head, nylok-coated (1)
Color
Torque
Black
1.5±0.2 kgfcm
8
Note: Touch inductive panel is fixed on the keyboard cover.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1130 Keyboard
For access, remove these FRUs in order:
•
•
Figure 13. Removal steps of keyboard
Lift the keyboard a little , and then detach the connector in the direction
1
shown by arrows
.
2 3
1
2
3
When installing: Make sure that the FPC connector is attached firmly.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
1140 Keyboard bezel, speakers, power board and volume
buttons board
For access, remove these FRUs in order:
•
•
•
•
•
•
•
Note: Power board and volume buttons board are attached to the keyboard bezel.
Figure 14. Removal steps of keyboard bezel, speakers, power board and
volume buttons board
Remove three screws
and six screws
on the bottom.
1
2
1
1
1
2
2
2
2
2
2
Step
Screw (quantity)
M2.5 × 2 mm, flat-head, nylok-coated (3)
M2.5 × 6.5 mm, flat-head, nylok-coated (6) Black
Color
Torque
Black
1.5±0.2 kgfcm
2.5±0.2 kgfcm
1
2
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 14. Removal steps of keyboard bezel, speakers, power board and
volume buttons board (continued)
Remove four screws
.
3
3
3
3
3
Step
Screw (quantity)
M2.5 × 4 mm, flat-head, nylok-coated (4)
Color
Torque
Black
2.0±0.2 kgfcm
3
57
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 14. Removal steps of keyboard bezel, speakers, power board and
volume buttons board (continued)
Detach five FPC connectors in the direction shown by arrows
. Unplug the
4 5
LCD connector in the direction shown by arrow
.
6
4
5
6
4
5
When installing: Make sure that all the FPC connectors and the LCD connector
are attached firmly.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 14. Removal steps of keyboard bezel, speakers, power board and
volume buttons board (continued)
Pull out two antenna cables (red, black) from the guide hole of the system
board in the direction shown by arrow . Release the antenna cables and the
7
LCD cable from the cable guides in the direction shown by arrows
.
8
7
8
8
8
8
8
When installing:
•
Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
•
Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 14. Removal steps of keyboard bezel, speakers, power board and
volume buttons board (continued)
Lift the keyboard bezel a little, detach two connectors in the direction shown by
arrows , and then remove the keyboard bezel
9
.
0
10
9
9
When installing: Make sure that the two connectors are attached firmly.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 14. Removal steps of keyboard bezel, speakers, power board and
volume buttons board (continued)
Remove four screws , release the speaker cables from the cable guides, and
K
then remove the speakers
.
L
11
11
11
11
12
12
Step
Screw (quantity)
Color
Torque
M2.0 × 2.65 mm, flat-head, nylok-coated (4) Black
1.5±0.2 kgfcm
K
61
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 14. Removal steps of keyboard bezel, speakers, power board and
volume buttons board (continued)
Detach two FPC connectors in the direction shown by arrows
, remove six
M N
screws , and then remove the power board and volume buttons board.
O
15
15
15
15
15
13
15
14
13
14
Step
Screw (quantity)
Color
Torque
M2.5 × 2 mm, flat-head, nylok-coated (6)
Black
1.5±0.2 kgfcm
O
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1150 System board, ExpressCard slot assembly and bluetooth
daughter card
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• In the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface such
as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
Note: ExpressCard slot assembly is attached to the system board.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 15. Removal steps of system board, ExpressCard slot assembly and
bluetooth daughter card
Remove three screws , and unplug the power assembly connector
1
.
2
1
1
1
2
When installing: Make sure that the power assembly connector is attached
firmly.
Step
Screw (quantity)
Color
Torque
M2.5 × 4 mm, flat-head, nylok-coated (3)
Black
2.0±0.2 kgfcm
1
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 15. Removal steps of system board, ExpressCard slot assembly and
bluetooth daughter card (continued)
Remove the system board in the direction shown by arrow
.
3
3
a
a
b
b
When installing: When attaching the system board to the base cover, adjust
the placement of the wireless radio switch and the graphics switch as shown
b
in , and make sure that both of the audio jack and the microphone jack are
a
attached to the holes on the base cover as shown in . Improper placement of
the switch or those jacks might cause a damage.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 15. Removal steps of system board, ExpressCard slot assembly and
bluetooth daughter card (continued)
Turn the system board over and remove two screws
.
4
4
4
Step
Screw (quantity)
Color
Torque
M2.0 × 2 mm, flat-head, nylok-coated (2)
White
1.5±0.2 kgfcm
4
Remove the ExpressCard slot assembly in the direction shown by arrow
.
5
5
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 15. Removal steps of system board, ExpressCard slot assembly and
bluetooth daughter card (continued)
Note: The bluetooth daughter card is attached to the system board.
Detach the connector , and remove the bluetooth daughter card in the
6
direction shown by arrow
.
7
7
6
When installing: Make sure that the connector is attached firmly.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
1160 LCD unit
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 16. Removal steps of LCD unit
Release three antenna cables from the cable guides of the base cover
and
1
remove four screws
.
2
2
2
2
2
1
Step
Screw (quantity)
Color
Torque
2.5±0.2 kgfcm
M2.5 × 6.5 mm, flat-head, nylok-coated (4) Black
2
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 16. Removal steps of LCD unit (continued)
Remove the LCD unit in the direction shown by arrows
.
3
3
3
69
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
1170 Base cover
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 17. Removal steps of base cover
Remove the power assembly in the direction shown by arrows
.
1
When installing: Make sure that the power connector is attached firmly.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 17. Removal steps of base cover (continued)
Release the TV-in cable from the cable guide and then remove the TV-in
assembly in the direction shown by arrows
.
2
2
When installing: Make sure that the TV-in connector is attached firmly.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
label:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
a
b
c
d
e
f
Rating label
COA label
WLAN label
Bluetooth label
MTM & PRC label
Israel label
g
Energy Save label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
a
c
b
d
e
f
g
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1180 LCD front bezel
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 18. Removal steps of LCD front bezel
Remove six screws
.
1
1
1
1
1
1
1
Step
Screw (quantity)
M2.5 × 4 mm, flat-head, nylok-coated (6)
Color
Torque
Black
2.0±0.2 kgfcm
1
73
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 18. Removal steps of LCD front bezel (continued)
Remove the LCD front bezel in the direction shown by arrows
.
2
2
2
2
2
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1190 LCD panel, LCD cable and hinges
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 19. Removal steps of LCD panel, LCD cable and hinges
Remove four screws
, and then release the hinges in the direction shown
1 2
by arrows
.
3
1
2
3
2
1
3
Step
Screw (quantity)
Color
Torque
M2.5 × 3.5 mm, flat-head, nylok-coated (2) Black
M2.0 × 3.5 mm, flat-head, nylok-coated (2) Black
2.0±0.2 kgfcm
1.5±0.2 kgfcm
1
2
75
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Figure 19. Removal steps of LCD panel, LCD cable and hinges (continued)
Remove two screws . Lift the lower side of the LCD panel, detach the
4
integrated camera connector in the direction shown by arrow
and then
5
remove the LCD panel
.
6
4
5
4
6
When installing: Make sure that the connector is attached firmly.
Step
Screw (quantity)
Color
Torque
M2.0 × 3.5 mm, flat-head, nylok-coated (2) Black
1.5±0.2 kgfcm
5
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Figure 19. Removal steps of LCD panel, LCD cable and hinges (continued)
Note: The LCD cables are attached to the LCD panel by a metal connector.
Peel off the adhesive tape and detach the metal connector in the direction
shown by arrow
.
7
7
When installing: Make sure that the metal connector is attached firmly.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
1200 Integrated camera
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 20. Removal steps of integrated camera
Note: The integrated camera is stuck on the top center of the LCD cover.
Remove the integrated camera from the LCD cover
.
1
1
When installing: Stick the integrated camera to the top center of the LCD
cover and ajust the placement of it to make sure the connector is attached
firmly.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
1210 Antenna assembly and LCD cover
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Figure 21. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the
direction shown by arrows
.
1
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Locations
Front view
Integrated camera
1
2
3
4
5
Array microphones (bulit-in)
Wireless LAN antennas
Speakers
System status indicators
Ambient Light Sensor
6
7
8
9
J
K
L
M
N
O
Lenovo SlideNav bar
OneKey Rescue System button
Power button
Touch pad
Media card slot
GPU (graphics processing unit) switch (specific models only)
Integrated wireless device switch
Cap sensor buttons
IdeaPad lighting logo
3
2
3
5
4
1
8
6
15
7
9
5
4
5
15
10
5
11
12
13
14
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Right-side view
Kensington slot
1
2
3
4
5
6
7
AC power adapter jack
TV-in jack (specific models only)
Optical drive
eSATA/USB combo port
ExpressCard Slot
USB port
1
2
3
4
5
6
7
Bottom and Left-side view
Microphone jack
Headphone jack
USB port
1
2
3
4
5
6
7
8
9
J
K
L
M
N
RJ-45 port
Fan louvers
HDMI port
VGA port
Central Processing Unit (CPU)/ Memory (RAM) compartment
Battery latch-manual
Battery pack
Battery latch-spring loaded
Mini PCI ExpressCard slot compartment (specific models only)
SIM card slot (specific models only)
Hard disk drive (HDD) compartment
11
10
9
8
7
12
13
6
5
12
4
3
14
2
1
81
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Table 5. Parts list—Overall
No. FRU
FRU no.
1
KL3 KB COVER ASSY
2
31043075
3
KL3 SENSOR/B (HD/LAN/BT_LED)SP
KL3 TOP COVER GRAY ASSY SP
4
11012049
31043058
11012047
11012048
31043056
31043057
5
6
KL3 POWER BUTTON/B (PWR/NOVO) SP
KL3A POWER BUTTON/B (PWR/NOVO)SP
KL3 VOLUME/B (VOL UP/DOWN/MUTE)SP
KL3A VOLUME/B (VOL UP/DOWN/MUTE) SP
6
7
7
8
Bluetooth card, BT2.1 + EDR, Fcn BCM92070 BT2.1 EDR Flash U NB 20002266
Bluetooth card, BT2.1 + EDR, USI BCM92070 BT2.1 EDR Flash U NB 20002326
8
9
KL3B M/B (PCH/XT/H1G)CLS WOCPU
11011963
11011964
11011972
102000791
102000790
102000789
9
KL3A M/B (PCH/XT)ARD WOCPU/SI
9
KL3 M/B (PCH/UMA)WOCPU/SIMM SP
10
10
10
10
10
10
10
10
11
11
12
13
13
13
13
13
CPU assembly, Intel ARD 2.66G 4M I7-620M rPGA processor
CPU assembly, Intel ARD 2.53G 3M I5-540M rPGA processor
CPU assembly, Intel ARD 2.40G 3M I5-520M rPGA processor
CPU assembly, Intel ARD 2.26G 3M C2 I5-430M PGA processor 102000788
CPU assembly, Intel ARD 2.26G 3M C2 I3-350M PGA processor 102000787
CPU assembly, Intel ARD 2.13G 3M C2 I3-330M PGA processor 102000786
CPU assembly, Intel i-720QM 1.60G 6M B-1 rPGA processor
CPU assembly, Intel i-820QM 1.73G 8M B-1 rPGA processor
KL3 HEAT SINK ASSY 35W UMA SP
102000734
102000733
31043101
31043102
31043064
KL3B HEAT SINK ASSY 45W DIS SP
KL3 FAN ASSY UMA (80.9*84.4*9.6) FCN
DDRIII 1066 1GB, SAM M471B2873FHS-CF8 DDR3 1066 1GB 11011550
DDRIII 1066 1GB, EBJ10UE8BDS0-AE-F (Rev D /1Gb/65nm) 11011281
DDRIII 1066 1GB, MT8JSF12864HZ-1G1F1(V58B/1Gb/68nm) 11010924
DDRIII 1066 1GB, HMT112S6BFR6C-G7 N0 (Orion/1Gb/54nm) 11010904
DDRIII 1066 1GB, HYN HMT112S6TFR8C-G7N0 DDR3 1066 11011555
1GB
13
13
13
13
13
DDRIII 1066 2GB, SAM M471B5673FH0-CF8 DDR3 1066 2GB 11011551
DDRIII 1066 2GB, EBJ21UE8BDS0-AE-F(Rev D /1Gb/65nm)
11011240
DDRIII 1066 2GB, MT16JSF25664HZ-1G1F1 (V58B/1Gb/68nm) 11010925
DDRIII 1066 2GB, HMT125S6BFR8C-G7 N0 (Orion/1Gb/54nm) 11010905
DDRIII 1066 2GB, HYN HMT125S6TFR8C-G7N0 DDR3 1066 11011554
2GB
13
13
13
13
DDRIII 1066 4GB, SAM M471B5273CH0-CF8 DDR3 1066 4GB 11011937
DDRIII 1066 4GB, HMT351S6AFR8C-G7N0 (Orion/2Gb/54nm) 11011215
DDRIII 1066 4GB, ELP EBJ41UF8BAS0-DJ-F DDR3 1066 4GB 11011867
DDRIII 1333 1GB, M471B2873EH1-CH9 (Rev E /1Gb/56nm) 11011242
(128Mbx8)
13
13
DDRIII 1333 1GB, M471B2873FHS-CH9 (Rev F /1Gb/46nm)
DDRIII 1333 1GB, EBJ10UE8BDS0-DJ-F(Rev D /1Gb/65nm)
11011936
11011497
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Table 5. Parts list—Overall (continued)
No. FRU
FRU no.
13
13
DDRIII 1333 1GB, MT8JSF12864HZ-1G4F1(V58B/1Gb/68nm) 11011494
DDRIII 1333 1GB, HMT112S6TFR8C-H9 N0 (CS Samples
2010.1.8)
11011971
13
DDRIII 1333 1GB, HMT112S6BFR6C-H9 N0 (Rev
Orion/1Gb/54nm)
11011244
13
13
13
13
13
DDRIII 1333 2GB, M471B5673EH1-CH9 (Rev E /1Gb/56nm)
DDRIII 1333 2GB, M471B5673FH0-CH9(Rev F /1Gb/46nm)
DDRIII 1333 2GB, EBJ21UE8BDS0-DJ-F(Rev D /1Gb/65nm)
11011241
11011935
11011496
DDRIII 1333 2GB, MT16JSF25664HZ-1G4F1((V58B/1Gb/68nm)) 11011493
DDRIII 1333 2GB, HMT125S6TFR8C-H9 N0 (CS Samples
2009.12.24)
11011970
13
DDRIII 1333 2GB, HMT125S6BFR8C-H9 N0 (Rev
Orion/1Gb/54nm)
11011243
13
13
DDRIII 1333 4GB, SAM M471B5273CH0-CH9 DDR3 1333 4GB
11011934
11011513
DDRIII 1333 4GB, HMT351S6AFR8C-H9 N0 ((Rev Orion
/2Gb/54nm))
13
14
14
14
14
14
DDRIII 1333 4GB, ELP EBJ41UF8BAS0-DJ-F DDR3 1066 4GB 11011867
WLAN card, 802.16e, Intel 6250NX MOW M PCIE NB HMC
WLAN card, 802.16e, Intel 6250GX MOW M PCIE NB HMC
20002321
20002388
WLAN card, 802.11 a/g/n, Intel 6200N MOW M PCIE NB HMC 20002324
WLAN card, 802.11 b/g/n(2*2), Gtc BCM43225 BGN MOW NB HMC 20002271
WLAN card, 802.11 b/g/n(2*2), Cbt AR9283 HB93 BGN MOW
HMC NB
20002276
14
14
14
14
14
WLAN card, 802.11 b/g/n(1*1), Gtc BCM4313 M 802.11N MOW NB 20002347
WLAN card, 802.11 b/g/n(1*1), Cbt AR9285 HB95 BGN MOW NB 20002346
WLAN card, 802.11 b/g/n(1*1), Liteon AR9285 HB95 BGN MOW NB 20002357
WLAN card, 802.11 b/g/n(1*2), Intel 1000N MOW M PCIE NB HMC 20002329
WWAN card, WCDMA/HSDPA 7.2M, Ericsson F3607gw
WCDMA 850MHz WWAN card
11011296
11011295
11010888
14
14
14
14
WWAN card, WCDMA/HSDPA 7.2M, Ericsson F3607gw
WCDMA 900MHz WWAN card
WWAN card, WCDMA/HSDPA 7.2M, Huawei EM770 HSDPA
MiniPCIE WWAN card
WWAN card, WCDMA/HSDPA 7.2M, Huawei EM770U WCDMA 11011654
MOW WWAN card
WWAN card, WCDMA/HSDPA 7.2M, Huawei EM770W
WCDMA MOW WWAN card
11011653
14
14
14
14
WWAN card, Gobi, Qualcomm GOBI WCDMA/EVDO WWAN Card 11011655
WWAN card, EVDO, Huawei EM660 EV-DO MiniPCIE WWAN card 11010853
WWAN card, EVDO, ZTE MC2716 EVDO MiniPCIE WWAN card
11011055
11011598
WWAN card, TD-SCDMA, TC LC5730C TD+CMMB MiniPCIE
WWAN card
14
14
WWAN card, TD-SCDMA, TC LC5730D TD-SCDMA MiniPCIE 11011652
WWAN card
WWAN card, TD-SCDMA, LM TD232 TD+CMMB MiniPCIE 11011650
WWAN card
85
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Table 5. Parts list—Overall (continued)
No. FRU
FRU no.
11011651
11011600
11011599
14
14
14
WWAN card, TD-SCDMA, LM TD231 TD-SCDMA MiniPCIE
WWAN card
WWAN card, TD-SCDMA, ZTE M302 TD-SCDMA MiniPCIE
WWAN card
WWAN card, TD-SCDMA, ZTE M303 TD+CMMB MiniPCIE
WWAN card
15
15
15
15
16
KL3 TV TUNER CARD DMB-TH 61A328HB04AD
KL3 TV TUNER MODULE ATSC 51A336AN00AE
KL3 DMB-TH TV TUNER CARD(MC163M)
KL3DVB-T TV TUNER CARD(MC907)
11012050
11012051
11012052
11012053
Battery pack, 3S2P 6cell, 5200mAh, 11.1V, Sanyo Y460&Y560 121000918
3S2P 57Wh Li-ion Battery
16
16
Battery pack, 3S2P 6cell, 5200mAh, 11.1V, Sony Y460&Y560
3S2P 57Wh Li-ion Battery
121000917
Battery pack, 3S2P 6cell, 5200mAh, 11.1V, LG Y460&Y560 3S2P 121000916
57Wh Li-ion Battery
17
17
17
18
KL3 BASE DIS W TV TUNE SP
KL3 BASE UMA W TV TUNER SP
KL3 BASE HYB W/TV TUNER SP
31043059
31043060
31043061
16004060
Hard disk drive, 250G 5400rpm SATA, Hitachi
HTS545025B9A300 250G 9NB
18
18
18
18
18
18
18
18
18
18
18
18
18
Hard disk drive, 250G 5400rpm SATA, WD WD2500BEVT-
22ZCT0 250G 9NB
16003731
Hard disk drive, 250G 5400rpm SATA, WD WD2500BEVT-24A23T0 16004524
5400RPM250G
Hard disk drive, 250G 5400rpm SATA, Seagate ST9250315AS 16004186
250G 9NB
Hard disk drive, 250G 5400rpm SATA, Toshiba MK2565GSX
5400RPM 250G
16004641
16004076
16004059
Hard disk drive, 250G 5400rpm SATA, Fujitsu MJA2250BH 250G
9NB
Hard disk drive, 320G 5400rpm SATA, Hitachi HTS545032B9A300
320G 9NB
Hard disk drive, 320G 5400rpm SATA, WD WD3200BEVT-22ZCT0 16003403
320G 9NB
Hard disk drive, 320G 5400rpm SATA, WD WD3200BEVT-
24A23T0 5400RPM320G
16004525
Hard disk drive, 320G 5400rpm SATA, Seagate ST9320325AS 16004183
320G 9NB
Hard disk drive, 320G 5400rpm SATA, Toshiba MK3265GSX
5400RPM 320G
16004642
16004075
16004058
16004526
Hard disk drive, 320G 5400rpm SATA, Fujitsu MJA2320BH
320G 9NB
Hard disk drive, 500G 5400rpm SATA, Hitachi
HTS545050B9A300 500G 9NB
Hard disk drive, 500G 5400rpm SATA, WD WD5000BEVT-
24A0RT0 5400RPM500G
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Table 5. Parts list—Overall (continued)
No. FRU
FRU no.
18
18
18
18
18
18
18
18
18
18
Hard disk drive, 500G 5400rpm SATA, Seagate ST9500325AS 16004189
500G 9NB
Hard disk drive, 500G 5400rpm SATA, Toshiba MK5065GSX
5400RPM 500G
16004643
16004074
16004527
16004644
16004530
16004639
Hard disk drive, 500G 5400rpm SATA, Fujitsu MJA2500BH
500G 9NB
Hard disk drive, 640G 5400rpm SATA, WD WD6400BEVT-
24A0RT0 5400RPM640G
Hard disk drive, 640G 5400rpm SATA, Toshiba MK6465GSX
5400RPM 640G
Hard disk drive, 320G 7200rpm SATA, Hitachi
HTS725032A9A364 7200RPM320G
Hard disk drive, 320G 7200rpm SATA, WD WD3200BEKT
7200RPM 320G
Hard disk drive, 320G 7200rpm SATA, Seagate ST9320423AS 16004533
7200RPM320G 9NB
Hard disk drive, 500G 7200rpm SATA, Hitachi
HTS725050A9A364 7200RPM500G
16004531
Hard disk drive, 500G 7200rpm SATA, Seagate ST9500420AS
7200RPM500G 9NB
16004532
18
18
19
SSD, Samsung MMDPE64GEDXP-MVB mSATA 64G
SSD, Samsung MMCRE32GEDXP-MVB mSATA 32G
16004558
16004557
ODD, 12.7mm Tray Rambo, Optiarc AD-7700H Tray in RAMBO 25009572
ODD
19
19
19
19
19
19
20
20
21
21
22
22
23
24
ODD, 12.7mm Tray Rambo, HLDS GT30N Tray in RAMBO
ODD, 12.7mm Tray Rambo, Optiarc AD-7585H
ODD, 12.7mm Tray Rambo, PCC UJ-890A Tray in RAMBO
ODD, 12.7mm Tray Rambo, PLDS DS-8A4S Tray in RAMBO
ODD, 12.7mm Tray BD Combo, Optiarc BC-5500H BD Combo
ODD, 12.7mm Tray BD Combo, PLDS DS-4E1S BD Combo
KL3 ODD BEZELASSY SP
25009116
25009461
25009440
25009439
25009785
25009829
31043062
31043063
31043054
31043055
31043082
31043083
31043089
31043086
KL3 BD COMBO BEZELASSY SP
KL3 SD DUMMY CARD
KL3 NEW CARD DUMMY CARD
KL3 THERMAL DOOR ASSY
KL3 THERMAL DOOR ASSY FOR DIS
KL3 HDD DOOR ASSY
KL3 SIM DOOR ASSY
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
15.6-in. WXGA TFT
Table 6. Parts list—15.6-in. WXGA TFT
No. FRU
FRU no.
1
2
3
3
3
3
3
4
5
6
6
7
7
7
7
KL3 LCD BEZEL ASSY SP
31043070
31043072
18003942
18003936
18003947
18003931
18003934
31043107
31043071
31043090
31043091
31043065
31043066
31043067
31043069
KL3 HINGE SP
15.6 HD LED Panel (Flat), B156XW04 V0
15.6 HD LED Panel (Flat), LP156WH3-TLQ1
15.6 HD LED Panel (Flat), CLAA156WA15A
15.6 HD LED Panel (Flat), N156B6-L0D
15.6 HD LED Panel (Flat), LTN156AT10-L01
KL3 LCD CABLE ASSY
KL3 CAMERA SP
KL3 ANTENNA DTV(EARTH II)+CABLE(F)
KL3 ANTENNA DTV(EARTH II)+CABLE(IEC)
KL3 LCD COVER PATTERN 3G ASSY SP
KL3 LCD COVER PATTERN W/O 3G ASSY SP
KL3 LCD COVER GAMING 3G ASSY SP
KL3 LCD COVER GAMING W/O 3G ASSY SP
89
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Keyboard
Table 7. Parts list—Keyboard
Language
P/N
Four Nordic countries
Canadian English&French
Japanese
25009485
25009487
25008698
25008734
25008581
25008684
25008737
25008746
25008687
25008691
25008748
25008749
25008750
25008752
25008583
25008585
25008592
25008417
25008419
25008422
25008754
25008594
25008756
25008425
25008596
25008598
25008757
25008436
25008443
25009497
25009499
25008384
25008656
25008660
25008664
25008666
25008669
25008678
25008682
25008685
25008688
25008694
25008706
25008709
Czech
International English
Swiss
Slovenian
Slovak
Icelandic
Belgian
Hungarian
Hebrew
Greek
Dutch
Chicony
Brazilian
Arabic
German
French
Russian
Traditional Chinese
Korean
Latin
Keyboard
(grey)
Portuguese
Thai
Turkish
Spanish
Italian
U.K. English
English
Four Nordic countries
Canadian English&French
International English
Swiss
Slovenian
Slovak
Icelandic
Belgian
Sunrex
Hungarian
Hebrew
Greek
Dutch
Czech
Japanese
Brazilian
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Table 7. Parts list—Keyboard (continued)
Language
P/N
Arabic
25008712
25008713
25008385
25008386
25008387
25008714
25008577
25008715
25008388
25008579
25008711
25008727
25008439
25008389
25008406
25008717
25008718
25008722
25008723
25008726
25008773
25008774
25008775
25008776
25008785
25008789
25008570
25008573
25008790
25008431
25008792
25008794
25008745
25008742
25008740
25008739
25008738
25008716
25008720
25008721
25008724
German
French
Russian
Traditional Chinese
Korean
Latin
Sunrex
(continued)
Portuguese
Thai
Turkish
Spanish
Italian
U.K. English
English
International English
Swiss
Slovenian
Slovak
Icelandic
Belgian
Keyboard (grey)
(continued)
Hungarian
Hebrew
Greek
Dutch
Czech
Japanese
Brazilian
Arabic
NMB
German
French
Russian
Traditional Chinese
Korean
Latin
Portuguese
Thai
Turkish
Spanish
Italian
U.K. English
English
Canadian English&French
Four Nordic countries
International English
Swiss
25009486
25009500
25008430
25008553
25008633
Keyboard
(white)
Chicony
Slovenian
91
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Table 7. Parts list—Keyboard (continued)
Language
P/N
Slovak
25008637
25008639
25008644
25008652
25008658
25008661
25008667
25008601
25008231
25008253
25008254
25008255
25008256
25008257
25008258
25008259
25008262
25008263
25008264
25008265
25008266
25008267
25008274
25008100
25009496
25009498
25008761
25008434
25008672
25008677
25008679
25008606
25008619
25008616
25008621
25008623
25008541
25008233
25008275
25008277
25008278
25008282
25008284
25008285
25008286
25008288
Icelandic
Belgian
Hungarian
Hebrew
Greek
Dutch
Czech
Japanese
U.K. English
Italian
Spanish
Chicony
(continued)
Turkish
Thai
Portuguese
Latin
Korean
Traditional Chinese
Russian
French
German
Arabic
Keyboard
(white)
(continued)
Brazilian
English
Four Nordic countries
Canadian English&French
Swiss
International English
Slovenian
Slovak
Icelandic
Belgian
Hungarian
Hebrew
Greek
Sunrex
Dutch
Czech
Japanese
U.K. English
Spanish
Italian
Turkish
Thai
Portuguese
Latin
Korean
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Table 7. Parts list—Keyboar d (continued)
Language
P/N
Traditional Chinese
25008289
25008290
25008291
25008292
25008293
25008294
25008101
25008600
25008765
25008766
25008767
25008768
25008769
25008772
25008725
25008736
25008743
25008751
25008242
25008232
25008236
25008238
25008237
25008240
25008241
25008243
25008245
25008246
25008247
25008249
25008250
25008251
25008252
25008099
French
Russian
German
Brazilian
Arabic
Sunrex
(continued)
English
International English
Swiss
Slovenian
Slovak
Icelandic
Belgian
Hungarian
Hebrew
Greek
Keyboard
(white)
(continued)
Dutch
Czech
Portuguese
Japanese
U.K. English
Italian
NMB
Spanish
Turkish
Thai
Latin
Korean
Traditional Chinese
French
Russian
German
Brazilian
Arabic
English
93
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Miscellaneous parts
Table 8. Parts list—Miscellaneous parts
FRU
P/N
System miscellaneous parts:
•
•
(a) KL2 ODD BKT (FBKL2003,REV3A)
31042936
59010524
(b) LE5 HDD BKT (FBLE5003,R3B)
Cable miscellaneous parts:
(c) KL2 BT CABLE ASSY
•
31042935
Note: Italicized letters in parentheses are references to the
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
AC adapters
Table 9. Parts list—3-pin AC adapters
FRU
P/N
65W, Delta ADP-65KH B adapter
65W, Liteon PA-1650-56LC adapter
65W, CPA-A065 20V3.25A adapter
65W, Brazil PA-1650-52LB adapter
90W, Delta ADP-90DD B adapter
90W, Liteon PA-1900-56LC adapter
90W, CPA-A090 20V4.5A adapter
120W, Liteon PA-1121-04 adapter
36001646
36001651
36001792
36001714
36001647
36001652
36001789
36001718
95
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Power cords
A Lenovo IdeaPad power cord for a specific country or region is usually
available only in that country or region:
Table 10. Parts list—3-pin power cords
Region
P/N
CCC
145000602
•
SSD YD-118-1+IEC53RVV+SSD-3-2B-1 1m
CCC
145000600
145000599
145000598
145000597
145000596
145000595
145000594
145000593
145000592
145000591
145000590
145000589
145000588
145000587
145000586
145000585
145000568
145000567
145000566
145000565
•
LINETEK PC323+RVV300/300+LS15 1m
Argentina
•
LINETEK LS15+H03VV-F+LP39 1m
Danmark
•
LINETEK LS15+H03VV-F+LP-38 1m
Switzerland
•
LINETEK LS15+H03VV-F+LP-37 1m
Brazil
• LINETEK LS15 H03VV-F LP26A 1m
Israel
•
LINETEK LS15+H03VV-F+LP-41 1m
UL
•
LINETEK LP-30B + SPT-2 + LS15 1m
UK
•
LINETEK LP-61L+ H03VV-F+ LS15 1m
Indian
•
LINETEK PE-361+ H05VV-F+ LS15 1m
Italy
•
LINETEK LS15+H03VV-F+PE-336 1m
Korea
•
LINETEK LS15+H05VV-F+LP-E04A 1m
Australia
•
LINETEK LS15+H03VV-F+LP-23A 1m
Taiwan
•
LINETEK LS15+VCTF+LP-53 1m
Japan
•
LINETEK LS15+VCTF+LP-54 1m
Africa
•
LINETEK LS15+H03VV-F+PE-364 1m
CE
•
LINETEK LP-34+H03VV-F + LS15 1m
CCC
•
Longwell LSG-31+RVV300/300+LS-18 1m
Argentina
•
Longwell LP-24+H03VV-F+LS-18 1m
Danmark
•
Longwell LP-40+H03VV-F+LS-18 1m
Switzerland
•
Longwell LP-37+H03VV-F+LS-18 1m
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo IdeaPad Y560
Table 10. Parts list—3-pin power cords (continued)
Region
P/N
Brazil
145000564
•
Longwell LP-46+H03VV-F+LS-18 1m
Israel
Longwell LP-41+H03VV-F+LS-18 1m
UL
Longwell LP-30B+SPT-2 18AWG+LS-18 1m
UK
145000563
145000562
145000561
145000560
145000559
145000558
145000557
145000556
145000555
145000554
145000553
•
•
•
Longwell LP-61L+H03VV-F+LS-18 1m
Indian
•
Longwell LP-67+BIS+LS-18 1m
Italy
•
Longwell LP-22+H03VV-F+LS-18 1m
Korea
•
Longwell LP-486+KTLH03VV-F+LS-5 1m
Australia
•
Longwell LP-23A+LFC-3R+LS-18 1m
Taiwan
•
Longwell LP-71+VCTF+LS-33 1m
Japan
•
Longwell LP-54+VCTF+LS-18 1m
Africa
•
Longwell LP-39+H03VV-F+LS-18 1m
CE
•
Longwell LP-34A+H03VV-F+LS-18 1m
97
Download from Www.Somanuals.com. All Manuals Search And Download.
IdeaPad Y560 Hardware Maintenance Manual
Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe
any Lenovo intellectual property right may be used instead. However, it is the
user’s responsibility to evaluate and verify the operation of any other product,
program, or service.
Lenovo may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents.
LENOVO GROUP LTD. PROVIDES THIS PUBLICATION “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimer of express or implied
warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes
will be incorporated in new editions of the publication. Lenovo may make
improvements and/or changes in the product(s) and/or the program(s)
described in this publication at any time without notice.
The products described in this document are not intended for use in
implantation or other life support applications where malfunction may result in
injury or death to persons. The information contained in this document does not
affect or change Lenovo product specifications or warranties. Nothing in this
document shall operate as an express or implied license or indemnity under the
intellectual property rights of Lenovo or third parties. All information contained
in this document was obtained in specific environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those
Web sites. The materials at those Web sites are not part of the materials for
this Lenovo product, and use of those Web sites is at your own risk.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments
may vary significantly. Some measurements may have been made on
development-level systems and there is no guarantee that these measurements
will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results
may vary. Users of this document should verify the applicable data for their
specific environment.
Trademarks
The following terms are either registered trademarks or trademarks of Lenovo
in the United States and/or other countries:
Lenovo®
Lenovo logo®
IdeaPad®
VeriFace®
OneKey Rescue®(OneKey Recovery, OneKey Antivirus)
APS®
Power Express®
Energy Management and ReadyComm®
The following terms are trademarks of Microsoft Corporation in the United
States, other countries, or both:
Windows®
Windows Vista®
Windows® 7
The following are trademarks of Intel Corporation or its subsidiaries in the
United States, other countries, or both:
Intel®
Intel® Core™ 2 Duo
Other company, product, or service names may be the trademarks or service
marks of others.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
|
