Lenovo Computer Monitor T545 User Manual

DANGER

To avoid shock hazard:

• Do not remove the covers.

• Do not operate this product unless the stand is attached.

• Do not connect or disconnect this product during an electrical storm.

• The power cord plug must be connected to a properly wired and grounded power outlet.

• Any equipment to which this product will be attached must also be connected to properlywired and

grounded power outlets.

• To isolate the monitor from the electrical supply, you must remove the plug from the power outlet.

The power outlet should be easily accessible.

Handling:

• Your color monitor is heavy, so handle it with care. IBM recommends that this monitor is moved or

lifted by two people.

DANGER

Pour éviter les risques d’électrocution :

• Ne retirez pas les capots du moniteur.

• N’utilisez pas ce produit si le socle n’est pas fixé.

• Ne connectez, ni ne déconnectez ce produit pendant un orage.

• Le câble d’alimentation doit être connecté à une prise électrique correctement mise à la terre et en

bon état de marche.

• Tout équipement auquel ce produit est relié doit être également connecté à une prise correctement

mise à la terre et en bon état de marche.

• Pour isoler le moniteur de la source d’alimentation électrique, vous devez le débrancher de la prise

électrique. Cette prise doit être facile d’accès.

Manutention :

• Votre moniteur couleurs est lourd et doit donc être manipulé avec soin. IBM vous conseille de le

déplacer ou de le porter à deux.

GEFAHRENHINWEIS

Um die Gefahr eines elektrischen Schlags zu vermeiden, folgendes beachten:

• Unter keinen Umständen die Abdeckungen abnehmen.

• Das Produkt nicht in Betrieb nehmen, wenn der Sockel nicht montiert ist.

• Das Gerät nicht während eines Gewitters an eine Steckdose anschließen oder von ihr trennen.

• Das Netzkabel ist an eine ordnungsgemäß verdrahtete und geerdete Steckdose anzuschließen.

• Jedes Gerät, mit dem dieses Produkt verbunden wird, muß ebenfalls an eine ordnungsgemäß

verdrahtete und geerdete Steckdose angeschlossen werden.

• Um den Monitor von der Stromversorgung zu trennen, muß der Stecker aus der Steckdose

gezogen werden. Die Steckdose sollte leicht zugänglich sein.

Handhabungshinweis:

• Ihr Farbbildschirm ist schwer. Sie sollten daher beim Transport vorsichtig vorgehen. IBM empfiehlt

Ihnen, den Bildschirm zu zweit anzuheben bzw. zu tragen.

Download from Www.Somanuals.com. All Manuals Search And Download.

PERIGO

Para evitar o perigo de choques eléctricos:

• Não retire as coberturas.

• Não utilize este produto antes de montar a base.

• Não ligue nem desligue este produto durante uma tempestade eléctrica.

• O cabo de alimentação deve ser ligado a uma tomada eléctrica devidamente ligada à terra.

• Qualquer equipamento ligado a este produto deve estar ligado a tomadas eléctricas devidamente

ligadas à terra.

• Para isolar o monitor da fonte de alimentação, retire a ficha do cabo de alimentação da tomada

eléctrica. A tomada eléctrica deve ser de fácil acesso.

Manuseio:

• Seu monitor colorido é pesado, então manuseie-o com cuidado. A IBM recomenda que o monitor

seja movido ou carregado por duas pessoas.

FARE

Sådan undgår du elektrisk stød:

• Kabinettet må under ingen omstaendigheder fjernes.

• Undgå at anvende dette produkt, uden at vippe/drejefoden er monteret.

• Undgå at tilslutte eller frakoble dette produkt i tordenvejr.

• Netledningen skal vaere tilsluttet en korrekt jordet stikkontakt med korrekt ledningsføring.

• Alt udstyr, som tilsluttes dette produkt, skal også vaere tilsluttet korrekt jordede stikkontakter med

korrekt ledningsføring.

• For at isolere skaermen fra strømforsyningen, skal stikket tages ud af stikkontakten.

Stikkontakten bør vaere let tilgaengelig.

Håndtering:

• Farveskærmen er tung, så den skal håndteres forsigtigt. IBM anbefaler, at skærmen flyttes eller

løftes af to personer.

FARE

Slik unngår du fare for elektrisk støt:

• Ikke ta av dekslene.

• Ikke bruk produktet dersom sokkelen ikke er montert.

• Ikke koble produktet til eller fra under tordenvaer.

• Pluggen på strømledningen må kobles til korrekt montert og jordet strømuttak.

• Utstyr som dette produktet eventuelt blir koblet til, må også kobles til korrekt montert og jordet

strømuttak.

• For å isolere skjermen fra strømkilden må du ta ut pluggen fra strømuttaket. Strømuttaket bør

vaere lett tilgjengelig.

Käsittely:

• Värinäyttö on painava, joten käsittele sitä varoen. IBM suosittelee, että kaksi henkilöä siirtää tai

nostaa sitä.

Download from Www.Somanuals.com. All Manuals Search And Download.

ARNING - LIVSFARA

För att undvika risk för elektriska stötar måste du tänka på följande:

• Ta inte bort några skyddskåpor.

• Använd inte den här produkten innan du har satt fast stativet.

• Anslut inte produkten till ett eluttag under åskväder. Koppla inte heller ur produkten från ett

eluttag under åskväder.

• Strömkabeln måste anslutas till ett felfritt och jordat uttag.

• All utrustning som den här produkten kopplas till måste också anslutas till felfria och jordade

uttag.

• För att bryta strömmen till bildskärmen måste du dra ut kontakten. Vägguttaget bör vara lätt att

komma åt.

Hantering:

• Färgskärmen är tung och bör därför hanteras försiktigt. IBM rekommenderar att den flyttas eller

lyfts av två personer.

VAARA

Sähköiskun vaaran välttämiseksi:

• ¢l‰ avaa laitteen kansia miss‰ ‰n tilanteessa.

• ¢lä käytä laitetta, ellei jalustaa ole kiinnitetty.

• ¢l‰ kytke laitetta pistorasiaan tai irrota sit‰ pistorasiasta ukonilman aikana.

• Virtajohto on kytkett‰v‰ asianmukaisesti johdotettuun ja maadoitettuun pistorasiaan.

• Kaikki muutkin laitteet, joihin t‰m‰ tuote on liitetty, on kytkett‰v‰ asianmukaisesti

johdotettuihin pistorasioihin.

• Kun haluat erottaa näyttimen sähköverkosta, sinun pitää irrottaa sen verkkojohto pistorasiasta.

Pistorasian pitäisi olla mahdollisimman lähellä näytintä ja vaivattomasti käsillä.

Håndtering:

• Värimonitorinne on painava, joten käsitelkää sitä varovasti. IBM suosittelee, että monitorin

siirtämiseen tai kantamiseen käytetään kahta henkilöä.

KIN¢Y¡ ™

°È· ÙËÓ · ÔÊ˘Á‹ ÎÈÓ‰‡ÓÔ˘ ËÏÂÎÙÚÔ ÏËÍ›·˜:

• ªËÓ ·Ê·ÈÚÂ›ÙÂ Ù· Î·Ï‡ÌÌ·Ù·.

• ÔıﬁÓË ‰ÂÓ Ú¤ ÂÈ Ó· ÏÂÈÙÔ˘ÚÁÂ› ÛÂ ÔÚÈ˙ﬁÓÙÈ· ı¤ÛË.

• ªË Û˘Ó‰¤ÂÙÂ ‹ · ÔÛ˘Ó‰¤ÂÙÂ ÙÔ ÚÔ˚ﬁÓ Î·Ù¿ ÙË ‰È¿ÚÎÂÈ·

ËÏÂÎÙÚÔı‡ÂÏÏ·˜.

• TÔ ËÏÂÎÙÚÈÎﬁ Î·ÏÒ‰ÈÔ ı· Ú¤ ÂÈ Ó· Û˘Ó‰¤ÂÙ·È ÌﬁÓÔ ÛÂ Ú›˙Â˜

ÌÂ Î·Ù¿ÏÏËÏË Î·Ïˆ‰›ˆÛË Î·È ÁÂ›ˆÛË.

• N· ¯ÚËÛÈÌÔ ÔÈÂ›ÙÂ ¿ÓÙÔÙÂ ÙÔÓ ÚÔÛ·ÚÌÔÁ¤· AC Ô˘ ˘ ¿Ú¯ÂÈ

ÛÙË Û˘ÛÎÂ˘·Û›· ÙË˜ ÔıﬁÓË˜.

• °È· Ó· · ÔÌÔÓÒÛÂÙÂ ÙËÓ ÔıﬁÓË · ﬁ ÙËÓ ·ÚÔ¯‹ ÚÂ‡Ì·ÙÔ˜,

Ú¤ ÂÈ Ó· ·Ê·ÈÚ¤ÛÂÙÂ ÙÔ ÊÈ˜ · ﬁ ÙËÓ Ú›˙·.

‚Ú›ÛÎÂÙ·È ÛÂ ÛËÌÂ›Ô Â‡ÎÔÏ· ÚÔÛ ÂÏ¿ÛÈÌÔ.

Ú›˙· Ú¤ ÂÈ Ó·

TEHLIKE

Elektrik çarpmas7 tehlikesinden kaçynmak için:

• Kapaklar7 çykarmay7n7z.

• Bu cihaz7 kaidesine tak7l7 durumda de5ilken çal7ttyrmay7n7z.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Bu cihaz7 elektriksel f7rt7na s7ras7nda prize takmay7n7z veya prizden ç7karmay7n7z.

• Elektrik kablosunun fiti, elektrik ve toprak ba5lant7lar7 usulüne uygun olarak yap7lm7t bir prize

tak7lmal7d7r.

• Bu cihazyn ba5lanaca57di5er tüm cihazlar da elektrik ve toprak ba5lant7lar7 usulüne uygun olarak

yap7lm7t prize tak7lm7t olmal7d7r.

• Monitörün elektrikle ba5lant7s7n7 kesmek için fitini prizden çekmeniz gereklidir. Priz, kolayca

eritilebilecek bir yerde olmal7d7r.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

. IBM

18Kg

•

Download from Www.Somanuals.com. All Manuals Search And Download.

3These user’s setup instructions cover typical user environments. The on-screen messages

may differ depending on the level of your hardware and software. In some cases you may

need to vary the setup procedures.

For more information, refer to your computer or operating system manuals or consult your

system administrator or dealer.

Ces instructions de configuration d’exploitation s’appliquent aux environnements

d’utilisation types. Les messages affichés à l’écran peuvent varier en fonction du niveau de

votre matériel et de vos logiciels informatiques. Dans certains cas, vous pouvez être amenés

à changer de procédures de configuration.

Pour de plus amples informations à ce sujet, veuillez vous reporter aux manuels de votre

ordinateur et de votre système d’exploitation, ou consultez l’administrateur de votre système

ou votre revendeur.

Diese Einstellungsanweisungen durch den Benutzer gelten für typische

Betriebsumgebungen. Die Bildschirmmeldungen können je nach Art der verwendeten

Hardware und Software auch anders lauten. In einigen Fällen müssen die

Einstellungsschritte unter Umständen abgeändert werden.

Weitere Informationen finden Sie im Computer- oder Betriebssystemhandbuch, oder wenden

Sie sich an Ihren Systemadministrator oder Fachhändler.

En estas instrucciones de configuración se describen entornos de usuarios típicos. Los

mensajes en pantalla, pueden diferir según sea el nivel del hardware y del software. En

algunos casos, necesitará seguir otros procedimientos para la configuración.

Para obtener más información, puede consultar los manuales del ordenador o del sistema

operativo o ponerse en contacto con el administrador del sistema o con el distribuidor.

Queste istruzioni di configurazione per l’utente coprono gli ambienti operativi comuni. I

messaggi che appaiono sul video possono differire a seconda dell’hardware e del software

utilizzati. In alcuni casi potrebbe essere necessario variare le procedure di configurazione.

Per ulteriori informazioni, fare riferimento ai manuali del computer o del sistema operativo, o

consultare il proprio amministratore di sistema o il concessionario.

Download from Www.Somanuals.com. All Manuals Search And Download.

First Edition (May / 2001)

This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information

herein; these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or

program(s) at any time.

It is possible that this publication may contain reference to, or information about, IBM products (machines and programs),

programming, or services that are not announced in your country.

Requests for copies of this publication and for technical information about IBM products should be made to your IBM Authorized

Dealer or IBM Retailer.

No part of this publication may be reproduced or distributed in any form or by any means without prior permission in writing from

the International Business Machines Corporation.

Note to U.S.Government users- - Documentation related to restricted rights- - use, duplication or disclosure is subject to

restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Notices

References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all

countries in which IBM operates. Any reference to an IBM product, program or service is not intended to state or imply that only

IBM’s product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe

any of IBM’s intellectual property rights or other legally protectable rights may be used instead of the IBM product, program, or

service. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly

designated by IBM, are the user’s responsibility.

IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document

does not give you any license to these patents.

Trademarks

The following terms, used in this publication, are trademarks or service marks of the IBM Corporation in the United States, other

countries, or both:

HelpCenter IBM

ENERGY STAR is a U.S. registered mark.

Microsoft®, Window®, and Windows NT@ are trademarks of Microsoft corporation in the United States, other countries, or both.

Other company, product, and service name may be trademarks or service marks of others.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Setup............................................................................................................................2

Hardware Requirements......................................................................................2

Handling Instructions ...........................................................................................2

Workplace preparation.........................................................................................2

Working Practices ................................................................................................3

Connecting your Monitor......................................................................................4

Switching on your Monitor....................................................................................4

Adjusting the Monitor Position .............................................................................5

Caring for your Monitor ........................................................................................5

Configuring your Monitor ..........................................................................................6

Setup Diskette for Microsoft Windows95 or Microsoft Windows98......................6

Setup Diskette for Microsoft Windows 2000 ........................................................7

Auto Setup ..................................................................................................................8

Auto Setup ...........................................................................................................8

Auto Setup for DOS .............................................................................................9

Auto Setup for Microsoft Windows3.1, Microsoft Windows95,

Microsoft Windows98, Microsoft Windows NT or Microsoft Windows2000........10

Manual Setup ............................................................................................................12

Adjusting Your LCD Monitor ...................................................................................13

User controls......................................................................................................13

On-screen display (OSD) controls .....................................................................15

Further Information ..................................................................................................18

Display modes ...................................................................................................18

Power Management...........................................................................................19

Troubleshooting .......................................................................................................20

Further Help.......................................................................................................22

Specifications ...........................................................................................................24

Warranty....................................................................................................................27

Compliances ...............................................................................see at rear of manual

Service Information....................................................................see at rear of manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup

Hardware Requirements

This monitor requires a computer with a suitable on-board sub-system or

Video Adapter card that can support XGA 1024 x 768, SVGA 800 x 600, or

VGA 640 x 480 at 60Hz.

Handling Instructions

Do not support the monitor

within the screen area. The

Liquid Crystal Display is glass

and can be damaged by rough

handling or excessive

1. Lift the monitor by placing both hands under the lower part of the cover.

(The display will rise to maximum lift height when locking clip has been

removed. See page 5 for details on removing the locking clip.)

pressure.

2. Before using your monitor for the first time, remove the clear protective

film from the front of the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Workplace Preparation

Height

This section gives advice

on what you should

consider before you set up

your monitor.

The monitor should be positioned so that the top of the screen is slightly

below your eye level when you sit at your workstation.

Orientation

- Choose a position that gives the least reflection from lights and windows,

usually at a right angle to any windows.

- Positon the monitor directly in front of you so that you do not have to twist

your body to use it.

- Tilt the monitor to a comfortable viewing angle.

Working Practices

Rest

This section gives advice

on how you can work

comfortably and reduce

fatigue.

Take regular breaks. Vary your posture, stand up and stretch occasionally

as prolonged use of computer workstations can be tiring.

Back

You should sit back in your chair and use the backrest.

Hands

Use a light touch on the keyboard, keeping your hands and fingers relaxed.

Allow a space in front of the keyboard to rest your wrists when not typing.

Consider using a wristpad.

Eyesight

Working with monitors, in common with any prolonged close work, can be

visually demanding. Look away from the screen periodically and have your

eyesight checked regularly.

Screen settings

Set the screen brightness and contrast to a comfortable level. You may

have to adjust this as the lighting changes during the day. Many application

programs let you select color combinations which can help you to view in

comfort. See the User controls section on page 13 for more information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting your Monitor

1. Turn off your computer and all attached devices.

Be sure to read the ‘Safety

Information’ at the front of this

User Guide before carrying out

this procedure.

2. Connect the monitor signal cable to the Video output of your computer

and tighten the thumscrews. Ensure that the connectors align. Do not

force the connectors as this may bend the pins.

If you system is equipped

with a digital Video card

using a DVI connector, change

the signal cable to the DVI-D

cable provided (See page 22

for details)

The AC adapter and signal

cable are connected to

your monitor. If you wish to

change these or to fit a

different stand, see Further

Help on page 22.

3. Connect the power cord. Connect it to the power adapter first insert the

plug into a properly grounded outlet.

Switching on your Monitor

1. Switch on the power source to your monitor.

2. Switch on your monitor by pushing and releasing the power switch

marked [ ].

[To switch off your monitor, push and release the power switch again.]

3. Switch on your computer.

4. Run AUTO SETUP by following the instructions in the Auto Setup

section on page 8.

Download from Www.Somanuals.com. All Manuals Search And Download.

038F/En

Adjusting the Monitor Position

Viewing Angle

You can tilt the screen backward and forward as shown below(figure A).

Rotate

You can rotate the screen leftward and rightward as shown below(figure A).

Height

You can adjust height of the screen(figure B).

Before adjusting your monitor for the first time, remove the locking clip

on rear of the stand. Carefully put down and hold the screen of monitor

and then squeeze at arrows shown to remove(figure C).

(B)

(C)

(A)

Caring for your Monitor

Be sure to turn off the power before you perform any maintenance on the

monitor. Clean your monitor as follows:

• Gently wipe the covers and the screen with a soft cloth.

• Remove finger marks and grease with a damp cloth and mild detergent.

• Never use flammable cleaning materials to clean your IBM monitor or

any other electrical apparatus.

Download from Www.Somanuals.com. All Manuals Search And Download.

Configuring your Monitor

Setup Diskette for Microsoft®Windows®95 or Microsoft®Windows®98

This section must be

completed before

To use the Plug and Play feature in Windows 95 or Windows 98, files

should be loaded from the IBM Monitor Installation diskette.

1. Turn off the computer and all attached devices.

2. Ensure that the monitor is connected correctly.

continuing with the

Microsoft Windows95 or

Microsoft Windows98 Auto

Setup on page 8.

3. Turn on the monitor and then the system unit. Allow the system to boot

into Microsoft Windows95 or Microsoft Windows98.

Your computer’s Plug and Play code may warn you that your system

hardware has changed. This probably means that it has detected your

new monitor for the first time.

4. Open the D^ISPLAYPROPERTIES window by clicking on START, SETTINGS,

CONTROL PANEL and then double clicking on the DISPLAY icon.

On LCD monitors, unlike

CRTs, a faster refresh rate

5. Select the SETTINGS tab.

does not improve display

quality. IBM recommends

using either 1024 x 768 at a

refresh rate of 60Hz or 640 x

480 at a refresh rate of 60Hz.

• In case of Windows 95 :

6 - 1. Select the CHANGE DISPLAY TYPE button.

2.Select the CHANGE MONITOR TYPE button.

• In case of Windows 98 :

6 - 1.Select the ADVANCED button.

2.Select the MONITOR tab.

3. Open the UPGRADE D^EVICEDRIVER W^IZARDwindow by clicking on

C^HANGEbutton and then select the N^EXTbutton.

If the UPGRADE DEVICE DRIVER WIZARD is open go to step 6-3. if not

contine to step 4.

4. Select the “Display a list of the known drivers for this device so that

I can choose a specific driver” and then select the NEXT button.

7. Insert the Setup diskette into drive A: and select the HAVE DISK button.

8. Select OK.

9. Choose IBM T545H monitor and select OK. The files will be copied from

the diskette to your hard drive.

10.Close all open windows and remove the diskette.

11.Reboot the system.

The system will automatically select the maximum refresh rate and

corresponding Color Matching Profiles.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Diskette for Microsoft®Windows®2000 Professional

This section must be

completed before

continuing with the

To use the Plug and Play feature in Windows 2000, files should be loaded

from the IBM Monitor Installation diskette.

1. Turn off the computer and all attached devices.

2. Ensure that the monitor is connected correctly.

Microsoft Windows2000 Auto

Setup on page 8.

3. Turn on the monitor and then the system unit. Allow the system to boot

into Microsoft Windows2000.

4. Open the D^ISPLAYPROPERTIES window by clicking on START, SETTINGS,

CONTROL PANEL and then double clicking on the DISPLAY icon.

5. Select the SETTINGS tab.

6. Select the A^DVANCEDbutton.

7. Select the M^ONITORtab.

8. Select the PROPERTIES button.

9. Select the D^RIVERtab.

On LCD monitors, unlike

CRTs, a faster refresh rate

does not improve display

quality. IBM recommends

using either 1024 x 768 at a

refresh rate of 60Hz or 640 x

480 at a refresh rate of 60Hz.

10.Open the U^PGRADEDEVICE DRIVER W^IZARDwindow by clicking on U^PDATE

D^RIVERand then select the N^EXTbutton.

11.Select the “Display a list of the known drivers for this device so that I can

choose a specific driver” and then select the NEXT button.

12.Insert the Setup diskette into drive A: and select the HAVE DISK button.

13.Select OK.

14.Choose IBM T545H monitor and select OK. The files will be copied

from the diskette to your hard drive.

15.Close all open windows and remove the diskette.

16.Reboot the system.

The system will automatically select the maximum refresh rate and

corresponding Color Matching Profiles.

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Setup

When you first use your monitor you must perform Auto Setup. This procedure

sets up your monitor to process the video signals from your computer without

image discoloration or smearing. After you perform Auto Setup, the settings are

stored and used each time you turn on the monitor.

Before carrying out this

section, it is very important

that The Setup Diskette for

Windows 95 or Windows 98

has been run.(see page6)

In order to optimise the displayed image a set-up utility is provided on the

IBM Monitor Installation Diskette. Operation of this utility is dependent on the

operating system on your computer. For correct operation locate the operating

system on your computer from the table below and follow the appropriate

instructions. You may choose to run AUTO SETUP for each operating system

that you use. This means that if you sometimes use your monitor while running

any version of Windows and sometimes also use it from within DOS (not a DOS

window), you must run AUTO SETUP for both Windows and DOS. You may run

versions of AUTO SETUP in any order.

The Setup Utility included

on the setup diskette is for

displaying dot patterns. They

do not replace or modify the

display driver.

The Auto Setup

instructions require the

monitor to be warmed up for 15

minutes. This is not required

for normal operation.

By pressing the

keys simultaneously allows

direct access to the auto set-up

controls.

and

Corresponding Auto Setup procedure

Operating System

DOS

Auto Setup for DOS on page 9

Auto Setup Microsoft Windows 3.1,

Windows 95, Windows 98, Windows 2000

or Microsoft Windows NT 4.0 workstation

on page 10

Microsoft Windows 3.1

Microsoft Windows 95

Microsoft Windows 98

Microsoft Windows 2000

Microsoft Windows NT 4.0

workstation

If your computer does not

run with the setup

Before you begin AUTO SETUP for your computer:

1. Make a backup copy of the setup diskettes supplied with the monitor.

diskettes shipped with the

monitor, refer to Manual Setup

on page 12

2. Make sure the computer video mode is set in the range of the

supported screen resolution shown in the table on page18.

You should perform AUTO SETUP for each screen mode you use.

The AUTO SETUP process

only applies to the current

screen mode. When a new

mode is selected, repeat this

section to reset the monitor.

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Setup for DOS

If the monitor is in standby

mode (STANDBY ON), it

1. Turn on the monitor first; then the computer.

may automatically turn off while

you are waiting for it to warm

up. If this happens, switch off

the monitor and switch it on

again after a few seconds.

If the message CHECK SIGNAL CABLE is displayed, or if nothing is

displayed check:

• that the video interface cable is not connected properly.

• the correct video adapter card is not installed.

2. Wait approximately 15 minutes, until the monitor warms up.

3. Insert the diskette labelled ‘IBM Monitor Installation Disk’ into the

diskette drive.

If you are using PC-DOS/V,

change to U.S. mode by

typing ‘CHEV US’ and pressing

ENTER at the command

prompt.

You must use when you run

DOS Auto Setup.

4. Display the command prompt screen of the DOS full-screen display.

5. At the command prompt, type ‘A:’ and press ENTER.

6. Type ‘TESTPATD’ and press ENTER.

7. Select from the screen the number for the color or text mode you want

to setup.

8. Select from the screen the number for the video mode you want to

setup.

You may repeat this process for as many of the color and video modes

as you need.

The size and diversity of

the dot pattern varies with

the screen resolution.

If the screen flickers,

repeat the setup several

times until the flicker is

minimised, or adjust it manually

by following Manual Setup on

page 12.

9. When the dot pattern appears, press the OSD Enter button

bottom of the monitor to display the initial OSD menu.

at the

10. Use an Arrow button ( or ), to select the IMAGE SET-UP icon

and press the OSD Enter button to access the function.

11. Using an Arrow button ( or ), select AUTO and press the OSD

Enter button . This activates the AUTO SETUP procedure, which will

optimize the display settings with the provided dot patterns.

The image may be affected during this procedure and you may notice

small changes to the test pattern.

12. When finished, the OSD main menu returns.

Press the Exit button

to exit from the OSD.

13. Press the ESCAPE key to exit the test pattern program.

14. Type ‘Exit’ at the command prompt to return to Windows.

If you use other operating systems, perform the appropriate AUTO SETUP

for those systems, also: see

Auto Setup Microsoft Windows 3.1, Windows 95, Windows 98,

Windows 2000 or Microsoft Windows NT on page 10.

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Setup for Microsoft®Windows®3.1, Windows®95 or

Microsoft®Windows®2000

If the monitor is in standby

mode (STANDBY ON), it

1. Turn on the monitor first; then the computer.

If the message CHECK SIGNAL CABLE is displayed, or if nothing is

displayed check:

may automatically turn off while

you are waiting for it to warm up.

• that the video interface cable is not connected properly.

• the correct video adapter card is not installed.

2. Wait approximately 15 minutes, until the monitor warms up.

3. Drag the icon bar and tool bar, if they are displayed, to the bottom of

the screen.

4. Insert the diskette labelled ‘IBM Monitor Installation Disk’ into the

diskette drive.

The size and diversity of the

dot pattern varies with the

screen resolution.

5. Check the operating system installed on your computer and follow the

instructions from the table below.

Operating

Step1

Step2

Step3

Step4

System

Open

Microsoft Windows 3.1

Select

RUN

PROGRAM PROGRAM

Manger

Type

‘A:\TESTPAT’

and press

ENTER

Microsoft Windows 95

Microsoft Windows 98

Manger

Select

START

Select RUN

Microsoft Windows 2000

Microsoft Windows NT

6. When the test pattern appears, press the OSD Enter button

bottom of the monitor to display the initial OSD menu.

at the

7. Use an Arrow button ( or ), to select the IMAGE SET-UP icon

and press the OSD Enter button to access the function.

Position the mouse pointer

at the bottom center of the

screen. This allows AUTO

SETUP to run properly

8. Using an Arrow button ( or ), select AUTO and press the OSD

Enter button . This activates the AUTO SETUP procedure, which will

optimize the display settings with the provided test pattern. The image

may be affected during this procedure and you may notice small

changes to the test pattern.

To abort the AUTO SETUP function, press the ESC key.

9. When finished, the OSD main menu returns. Press the Exit button

once to exit from the OSD.

Download from Www.Somanuals.com. All Manuals Search And Download.

10. Press the ESC key to return to Windows.

You have completed the monitor setup for Windows. If you use other operat-

ing systems, perform the appropriate AUTO SETUP for those systems, also: see

Auto Setup for DOS on page 9.

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual Setup

Normally, you can complete the setup procedure using AUTO SETUP, however,

if your screen image is still distorted after you perform AUTO SETUP or the

setup diskette does not run on your system, perform MANUAL SETUP.

If the monitor is in standby

mode (STANDBY ON), it

might automatically turn off

while you are waiting for it to

warm up.

1. Have your monitor turned on for about 15 minutes, until the monitor

warms up.

2. Display the image you most frequently use on the screen.

3. Press the OSD Enter button

the initial OSD menu.

at the bottom of the monitor to display

4. Use an Arrow button (

and press the OSD Enter button

5. Using an Arrow button ( or

press once to select COARSE. Left and right arrow adjustment

) to select the IMAGE SET-UP icon

to access the function.

), select MANUAL, press

and then

indicators become illuminated (see page18).

6. Use the Arrow buttons to manually adjust to correct (as much as

possible) for noise in the video signal then press

changes.

to save the

7. Use an Arrow button to select FINE and press the

button.

8. Use the Arrow buttons again to tune the image to your liking.

9. When finished, press the Exit button

OSD.

four times to exit from the

You have completed the monitor setup.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Your LCD Monitor

User controls

User control features

Icon

Direct Access Function

Function Using Menu Controls

1. Exits from menus, sub menus

2. Exits from OSD

None

Moves the cursor to highlight icons or

make adjustments.

1. Brings up Brightness control

OSD

2. Left and Right arrows

pressed together bring up

auto setup

Moves the cursor to highlight icons or

make adjustments.

1. Brings up Contrast control

OSD

2. Left and Right arrows

pressed together bring up

auto setup

The image is already

optimized for many display

modes, however the user

controls can be used to adjust

the image to your liking.

1. Displays main OSD menu

2. Enters highlighted menus and

submenus

Control lock activated when

pressed for 10 seconds

The settings are saved

after adjustment and

when exiting the OSD and

3. Selects highlighted option

Switches the monitors on and off

will be effective thereafter.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS LOCK / UNLOCK

This feature allows you to secure the current control settings, while allowing

the user to adjust Brightness, Contrast and initiate Auto Setup, so that they

cannot be inadvertently changed. Push and hold the enter button[ ] for 10

seconds; the message “Controls Locked” appears.

You can unlock the OSD controls at any time by pushing the enter button[

]

for 10 seconds; the message “Controls Unlocked” will appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-screen display (OSD) controls

The settings adjustable with the user controls are viewed through the On -

Screen Display (OSD). Press the enter button [ ] to display the main OSD

menu.

The LCD monitor needs

time to become thermally

stable the first time you turn it

on each day. Thus, to achieve

more accurate adjustments for

parameters, allow the LCD

monitor to warm up (be On) for

at least 15 minutes before

Initial appearance of OSD

main menu;

When the Digital Signal input

M A I N M E N U

When the Analog Signal input

M A I N M E N U

making any screen adjustment.

B R I G H T N E S S

Dgital Input

B R I G H T N E S S

Analog Input

sub menu;

B R I G H T N E S S

7 5

OSD functions

Control and

Adjustments

OSD Icon

Description

sub-menu(s)

Adjusts brightness

BRIGHTNESS

CONTRAST

Adjusts contrast

The IMAGE SET-UP function is used

to adjust the level of noise in the video

signal which causes horizontal lines or

areas on the screen where the image

appears to be unstable and jitters or

shimmers. This can be done

Auto

If AUTO is selected the

image will automatically

adjust

IMAGE SET-UP

automatically or manually.

It is not availible when the digital

input

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls and

Adjustments

OSD Icon

Description

Sub-menu(s)

If manual is selected, the user will go

to the manual adjustment screen.

To adjust the focus of the

display. This item allows

you to remove any

Manual SET-

• Fine

• Coarse

horizontal noise and clear

or sharpen the image of

characters.

Fine adjustments should

be can done after

adjusting the Coarse .

Select the Color Mode you find most

comfortable and then fine tune the

colors using the User Color Mode

menu, if necessary.

COLOR MODE

Preset 1

(Warm White)

COLOR

Preset 2

(Normal White)

Preset 3

(Cool White)

USER COLOR

MODE-

•

Red

Increases or decreases

redness

Green

Blue

Increases or decreases

greenness

Increases or decreases

blueness

H-POSITION

V-POSITION

Changes the position of the OSD on the

screen.

OSD Position

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls and

Adjustments

Description

Sub-menu(S)

OSD Icon

RESET

Reset should return all available functions

(apart from language which should not

change unless adjusted via the

LANGUAGE menu) fo their factory

presets.

• YES

• NO

Moves the screen left and right .

It is not availible when the digital input

H-POSITION

V-POSITION

Moves the screen up and down.

It is not availible when the digital input

To select OSD size

• SMALL

• MID

• BIG

OSD SIZE

Language

OSD time

• ENGLISH

• FRANCAIS

• DEUTSCH

• ITALIANO

• ESPANOL

The language chosen affects only the language of the OSD.

Select one of the five language to use for the OSD.

It has no effect on any software running on the computer.

To select OSD display duration time.

(5 - 60 seconds)

Display model name, serial number, year of manufacture

and microcode level.

• INFORMATION

• PRESET MODES

Information

Display all preset modes stored in the monitor.

Display all user modes stored in the monitor.

• USER MODES

The current display mode will be shown at the base of all

information screens.

Use the

buttons to move between

information screens.

and

Download from Www.Somanuals.com. All Manuals Search And Download.

Further Information

The display mode the monitor uses is controlled by the computer. Therefore,

you should refer to your computer documentation for details on how to

change display modes.

Display modes

The image size, position and shape may change when the display mode

changes. This is normal and the image can be readjusted using AUTO SETUP

and the monitor controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker,

TFT technology is inherently flicker-free. If possible, configure your computer

for 1024 x 768 addressability at 60Hz vertical refresh rate.

For the display modes listed below, the screen image has been optimized

during manufacture.

Factory Set Display Modes

Horizontal

Frequency

Addressabillty

Refresh Rate

640 x 350

720 x 400

640 x 480

800 x 600

832 x 624

1024 x 768 †

1024 x 768

70 Hz

60 Hz

66 Hz

75 Hz

56 Hz

60 Hz

72 Hz

75 Hz

60 Hz

70 Hz

75 Hz

31.5 kHz

35.0 kHz

37.5 kHz

35.2 kHz

37.9 kHz

48.1 kHz

46.9 kHz

49.7 kHz

48.4 kHz

56.5 kHz

60.0 kHz

† Recommended

Note : VESA timings are as detailed in the VESA “Display Monitor Timing

Specification”. Version 1.0, Revision 0.8, Dated 09/17/98.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Management

To benefit from power management, the monitor must be used in

If your computer has

previously been used with

a CRT monitor and is currently

configured to a display mode

outside the range that the Flat

Panel monitor can display, you

conjunction with a computer that implements the Video Electronics

Standards Association (VESA) Display Power Management Signalling

(DPMS) Standard.

The power management feature is invoked when the computer recognizes

may need to re-attach the CRT that you have not used your mouse or keyboard for a user-definable period.

monitor temporarily until you

have reconfigured the

There are several states as described in the table below.

computer, preferably to 1024 x

768 at 60Hz.

As an ENERGY STAR 2000 Partner, IBM has determined that this

product meets the ENERGY STAR 2000 guidelines for energy efficiency.

IBM recommends that you switch off your monitor at the end of each

working day, or whenever you expect to leave it unused for long periods

during the day.

Restoring

Operation

Power

Indicator

Compliance

Screen

State

Steady green

Steady amber

Normal

Blank

DPMS

Standby

ENERGY

STAR 2000^®

Press a key or

move the mouse.

Flashing

amber

(0.5 sec. interval)

Press a key or

move the mouse.‡

ENERGY

DPMS

Suspend

Blank

STAR 2000^®

Flashing

amber

(1 sec. interval)

Press a key or

move the mouse.‡

ENERGY

STAR 2000^®

DPMS Off

‡ There may be a slight delay before the picture reappears.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

If you have a problem setting up or using your monitor, you may be able

to solve it yourself. Before calling your retailer or IBM, try the suggested

actions that are appropriate to your problem.

Possible

Cause

Problem

Suggested Action

Reference

Connecting

your

Monitor

• Ensure that the electrical outlet

and the monitor are both

switched on.

No power to

monitor.

Sreen is blank

and power

indicator is off.

• Check that the power cord

is firmly plugged into the

electrical outlet and the power

supply unit.

section on

page 4.

• If the power cord plug has

a removalble fuse, replace it.

• Try another power cord.

• Try another electrical outlet.

Brightness

and Contrast

may be too

low.

• Adjust brightness and contrast. User

controls

Sreen is blank

and power

indicator is

section on

page 13.

steady green.

Sreen is blank The monitor is

• Press any key on the keyboard

or move the mouse to restore

operation.

• Check the Power Management

software on your computer.

Power

Management

and power

indicator is

in the Power

Management

section on

page 19.

steady amber. Standby state.

• Press the

to switch

between analog and digital

mode. If the panel is the wrong

mode for the signal being

provided, the monitor appears

to go into sleep mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Possible

Cause

Suggested Action

Reference

Problem

The monitor is

not receving a

video signal

Sreen is blank

and power

indicator is

flashing green

every 0.5

Connecting

your monitor

• Check that the signal cabel

is firmly connected to the

computer.

• Check that no pins are bent

in the signal cable connector.

section on

page 4

second

Display mode of • Reconfigure key on the

Further

the computer is

outside the

range of the

monitor

computer to use a supported Information

display mode.

section on

page 18

Sreen is blank

and power

indicator is

flashing green

every 0.5 or 1

second

Power

The monitor is in • Press any key on the keyboard

the Power

Management

Suspend or Off

state.

or move the mouse to restore

operation.

Management

section on

page 19

• Check the Power management

software on your computer.

User

Image appears

to be smeared

• Select IMAGE SET-UP menu

in the OSD. Then select

MANUAL to adjust FINE /

COARSE settings.

There are noises

in the video

Controls

section on

page 13

For image problems, you

signal

i _{may want to run AUTO}

SETUP again before

consulting to this section. In

most cases, AUTO SETUP

can fix the problems. See

Auto Setup for the computer

on page 8 for details.

User

Image appears

to be discolored

• Adjust the Color settings.

The color setting

may be incorrect.

Controls

section on

page 13

The LCD contains over 2,300,000 thin-film transistors (TFTs).

A small number of missing, discolored, or lighted dots may be

present on the screen, which is an intrinsic characteristic of the

TFT LCD technology and is not an LCD defect.

A few dots are

missing,

discolored, or

inappropriately

lighted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Further Help

Machine Name – T545H Color Monitor

Warranty Period – Three (3) Years

See the IBM Statement of Limited Warranty included in this publication for IBM’s

warranty terms and conditions.

The IBM Machine Warranty worldwide Web site at

http://www-1.ibm.com/servers/support/machine_warranties/ provides a worldwide

overview of IBM’s Limited Warranty for IBM Machines, a Glossary of IBM definitions,

Frequently Asked Questions (FAQs) and Support by Product (Machine) with links to

Product Support pages. The IBM Statement of Limited Warranty is also available

on this site in 29 languages via pdf files.

If possible, stay by your

computer. Your Technical

Support Representative may

wish to go through the problem

with you during the call.

Service and support

With the original purchase of an IBM machine, you have access to extensive support

coverage. During the IBM machine warranty period, you may call IBM or your

reseller for problem determination assistance under the terms of the IBM Statement

of Limited Warranty. You may seek help as follows:

Call IBM HelpCenter ® .

In the US call 1-800-772-2227

In Canada (Toronto only) call 416-383-3344

(all others) call 1-800-565-3344

In other countries, contact your dealer, retailer, or other IBM authorized servicer.

Before calling, please have available as much of the following information as

possible:

1. Type, model and serial number from the label on the back of your monitor.

2. Purchase receipt.

3. Description of problem.

4. computer type and model.

5. System configuration (hardware fitted etc.).

6. System BIOS version number.

7. Operating System and version number.

8. Display driver version number.

If possible, stay by your computer system. Your technical support representative

might want to go through the problem with you during the call.

More help, late-breaking

news and details of the

latest accessories for these

products may be found on the

worldwide web at:

http://www.pc.ibm.com/us/

accessories

Information about the Video

Electronics Standards

Association can be found

on the worldwide web at :

Removing the stand and cables

Alternative stands for your IBM Flat Panel Monitor may be available from specialist

suppliers.

http://www.vesa.org

This product is equipped with mounting facilities that conform to the VESA

Flat Panel Monitor Physical Mounting Interface Standard (FPMPMI).

This product is shipped with the signal cable and the power cord attached

to the monitor. If you want to use other cables for reasons such as having the

monitor wall-mounted, follow the instructions below:

Be sure to read the Safety

Information at the front of

this user guide before carrying

out changes to stands or

cables.

1. Disconnect the power cord from the wall outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Lift the bottom of the cable cover (A) and pull it off.

3. Lay the monitor facedown on a cushion and remove the four screws

holding the hinge mechanism on the monitor. Lift off the hinge and base

assembly(B).

4. If you are installing an arm or wall-mounting device, follow the directions

included with the device. If you are just changing your cables, continue

with step 5.

5. Squeeze the side of the rear cover (C) and pull it off.

6. Remove the signal cable and the power cord from the monitor by

disconnecting the corresponding adapters.

7. Connect the signal cable and the power cord and ensure the positioning

of the cables is as shown in the diagram.

8. Slide the rear cover(C) on rear panel of the monitor.

9. Put the hinge cover back on, fit the four screws to hold the hinge

mechanism on rear panel of the monitor.

10. Slide the cable cover on the base assembly(B).

To obtain the correct cables and/or to get further instructions on

installing them, call the IBM HELPCENTER at the above numbers or

contact your dealer, retailer, or other IBM authorized Servicer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

DVI-I Connector (Digital/Analog)

Signal(DVI-I)

T. M. D. S. Data2-

T. M. D. S. Data2+

T. M. D. S. Data2/4 Shield

T. M. D. S. Data4-

T. M. D. S. Data4+

DDC Clock

16.

17.

18.

19.

20.

21.

22.

23.

24.

Hot Plug Detect

T. M. D. S. Data0-

T. M. D. S. Data0+

T. M. D. S. Data0/5 Shield

T. M. D. S. Data5-

T. M. D. S. Data5+

T. M. D. S. Clock Shield

T. M. D. S. Clock+

T. M. D. S. Clock-

Analog Red

DDC Data

Analog Vertical Sync.

T. M. D. S. Data1-

T. M. D. S. Data1+

T. M. D. S. Data1/3 Shield

T. M. D. S. Data3-

T. M. D. S. Data3+

+5V Power

The DVI - I (Digital Visual

Interface - integrated) port

supports analog and digital signal

inputs and also improves quality of

the displayed image by eliminating

poor video at the monitor source.

10.

11.

12.

13.

14.

15.

Analog Green

Analog Blue

Analog H. Sync.

Analog Ground

Ground (return for +5V,

H. Sync. and V. Sync.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

This color monitor (Type-model 9493-Axx) uses a 15.1-inch TFT LCD.

401.3 mm

57 mm

Dimensions

Width:

Depth:

250 mm(including stand)

338.5 mm (min lift)

463.5 mm (max lift)

Height:

7.1 kg (15.62 lbs)

Weight

0°

30°

Stand Range

Forward Tilt :

Backward Tilt :

Vertical Lift :

Swivel :

Range : 125mm

Range : -150˚ / +150˚

Viewable Image Size:

Maximum Height:

Maximum Width:

Pixel Pitch:

Image

15.1” (383.6 mm)

230.4 mm

307.2 mm

Power consumption figures

are for the monitor and the

power supply combined.

0.3 mm (H) x 0.3 mm (V)

Supply Voltage:

Max Supply Current:

90 - 264 Vac 60/50 ± 3Hz

3 Arms at 90 Vac

Power Input

Normal Operation:

DPMS Stand-by:

DPMS Suspend:

DPMS off:

Power

Consumption

< 30 W

< 3 W

Analog /Digital Direct Drive

75 ohm 0.7V

1024 pixels (max)

768 lines (max)

78 MHz

Input Signal:

Video Input

Horiz. Addressability:

Vert. Addressability:

Clock Frequency:

Separate (TTL)

Composite (TTL)

Sync Input

Type

Communications

VESA DDC:

Supported Display

Modes

Standard modes :

IBM, VESA, MAC

Horiz / Vert Freq:

See Factory Set Display Modes

on page 18.

See Display Mode Ranges on

page 26.

Temperature:

Operating:

Storage:

Shipping:

Humidity:

Operating:

Storage:

Environment

10 to 35° C

- 20 to 60° C

10 to 80%

5 to 95%

Shipping:

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Mode Ranges

Horizontal Frequency /

Range ( + / - 3%)

Refresh Rate /

Range ( + / - 3%)

Addressabillty

640 x 350

720 x 400

640 x 480

800 x 600

832 x 624

1024 x 768

67.9 ~ 72.1 Hz

58.2 ~ 61.8 Hz

64.0 ~ 68.0 Hz

72.8 ~ 77.3 Hz

54.3 ~ 57.7 Hz

58.2 ~ 61.8 Hz

69.8 ~ 74.2 Hz

72.8 ~ 77.3 Hz

58.2 ~ 61.8 Hz

67.9 ~ 72.1 Hz

72.8 ~ 77.3 Hz

30.56 ~ 31.45 kHz

34.95 ~ 36.05 kHz

36.38 ~ 38.63 kHz

34.14 ~ 36.26 kHz

36.76 ~ 39.04 kHz

46.66 ~ 49.54 kHz

45.49 ~ 48.31 kHz

48.21 ~ 51.19 kHz

46.95 ~ 49.85 kHz

54.81 ~ 58.20 kHz

58.20 ~ 61.80 kHz

Download from Www.Somanuals.com. All Manuals Search And Download.

Statement of Limited Warranty

Part 1 - General Terms

This Statement of Limited Warranty includes Part 1 - General Terms and Part 2 - Country-unique Terms. The terms of Part 2 replace or modify those of

Part 1. The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use, and not for resale, from

IBM or your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of

them. The term “Machine” does not include any software programs, whether pre-loaded with the Machine, installed subsequently or otherwise. Unless

IBM specifies otherwise, the following warranties apply only in the country where you acquire the Machine. Nothing in this Statement of Limited

Warranty affects any statutory rights of consumers that cannot be waived or limited by contract. If you have any questions, contact IBM or your

reseller.

The IBM Warranty for Machines

IBM warrants that each Machine 1) is free from defects in materials and workmanship and 2) conforms to IBM’s Official Published Specifications

(“Specifications”). The warranty period for a Machine is a specified, fixed period commencing on its Date of Installation. The date on your sales receipt is

the Date of Installation unless IBM or your reseller informs you otherwise.

If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) make it do so or 2) replace it with

one that is at least functionally equivalent, you may return it to your place of purchase and your money will be refunded.

Extent of Warranty

The warranty does not cover the repair or exchange of a Machine resulting from misuse, accident, modification, unsuitable physical or operating

environment, improper maintenance by you, or failure caused by a product for which IBM is not responsible. The warranty is voided by removal or

alteration of Machine or parts identification labels.

THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS,

EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL

RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. SOME

JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO THE

ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN

DURATION TO THE WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.

Items Not Covered by Warranty

IBM does not warrant uninterrupted or error-free operation of a Machine.

Any technical or other support provided for a Machine under warranty, such as assistance via telephone with “how-to” questions and those regarding

Machine set-up and installation, will be provided WITHOUT WARRANTIES OF ANY KIND.

Warranty Service

To obtain warranty service for a Machine, contact IBM or your reseller . If you do not register your Machine with IBM, you may be required to present

proof of purchase. During the warranty period, IBM or your reseller, if approved by IBM to provide warranty service, provides without charge certain

types of repair and exchange service to keep Machines in, or restore them to, conformance with their Specifications. IBM or your reseller will inform you

of the available types of service for a Machine based on its country of installation. At its discretion, IBM or your reseller will 1) either repair or exchange

the failing Machine and 2) provide the service either at your location or a service center. IBM or your reseller will also manage and install selected

engineering changes that apply to the Machine.

Some parts of IBM Machines are designated as Customer Replaceable Units (called “CRUs”), e.g., keyboards, memory, or hard disk drives. IBM ships

CRUs to you for replacement by you. You must return all defective CRUs to IBM within 30 days of your receipt of the replacement CRU. You are

responsible for downloading designated Machine Code and Licensed Internal Code updates from an IBM Internet Web site or from other electronic media,

and following the instructions that IBM provides.

When warranty service involves the exchange of a Machine or part, the item IBM or your reseller replaces becomes its property and the replacement

becomes yours. You represent that all removed items are genuine and unaltered. The replacement may not be new, but will be in good working order and at

least functionally equivalent to the item replaced. The replacement assumes the warranty service status of the replaced item. Many features, conversions, or

upgrades involve the removal of parts and their return to IBM. A part that replaces a removed part will assume the warranty service status of the removed

part. Before IBM or your reseller exchanges a Machine or part, you agree to remove all features, parts, options, alterations, and attachments not under

warranty service.

You also agree to

1. ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange;

2. obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own; and

Download from Www.Somanuals.com. All Manuals Search And Download.

3. where applicable, before service is provided:

a. follow the problem determination, problem analysis, and service request procedures that IBM or your reseller provides;

b. secure all programs, data, and funds contained in a Machine;

c. provide IBM or your reseller with sufficient, free, and safe access to your facilities to permit them to fulfill their obligations; and

d. inform IBM or your reseller of changes in a Machine’s location.

IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the

transportation charges.

Neither IBM nor your reseller is responsible for any of your confidential, proprietary or personal information contained in a Machine which you return to

IBM or your reseller for any reason. You should remove all such information from the Machine prior to its return.

Limitation of Liability

Circumstances may arise where, because of a default on IBM’s part or other liability, you are entitled to recover damages from IBM. In each such instance,

regardless of the basis on which you are entitled to claim damages from IBM (including fundamental breach, negligence, misrepresentation, or other

contract or tort claim), except for any liability that cannot be waived or limited by applicable laws, IBM is liable for no more than

1. damages for bodily injury (including death) and damage to real property and tangible personal property; and

2. the amount of any other actual direct damages, up to the charges (if recurring, 12 months’ charges apply) for the Machine that is subject of the claim. For

purposes of this item, the term “Machine” includes Machine Code and Licensed Internal Code.

This limit also applies to IBM’s suppliers and your reseller. It is the maximum for which IBM, its suppliers, and your reseller are collectively responsible.

UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR

DAMAGES (OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2) LOSS OF, OR DAMAGE TO, YOUR RECORDS

OR DATA; OR 3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES,

LOST PROFITS OR LOST SAVINGS, EVEN IF IBM, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

GOVERNING LAW

Both you and IBM consent to the application of the laws of the country in which you acquired the Machine to govern, interpret, and enforce all of your

and IBM’s rights, duties, and obligations arising from, or relating in any manner to, the subject matter of this Agreement, without regard to conflict of law

principles.

Part 2 - Country-unique Terms

AMERICAS

BRAZIL

Governing Law: The following is added after the first sentence:

Any litigation arising from this Agreement will be settled exclusively by the court of Rio de Janeiro.

NORTH AMERICA

Warranty Service: The following is added to this Section:

To obtain warranty service from IBM in Canada or the United States, call 1-800-IBM-SERV (426-7378).

CANADA

Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first sentence: laws in the Province of Ontario.

UNITED STATES

Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first sentence: laws of the State of New York.

ASIA PACIFIC

AUSTRALIA

The IBM Warranty for Machines: The following paragraph is added to this Section:

The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other similar legislation and are

only limited to the extent permitted by the applicable legislation.

Limitation of Liability: The following is added to this Section:

Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974 or other similar legislation, IBM’s liability is limited to the

repair or replacement of the goods or the supply of equivalent goods. Where that condition or warranty relates to right to sell, quiet possession or clear

title, or the goods are of a kind ordinarily acquired for personal, domestic or household use or consumption, then none of the limitations in this paragraph

apply.

Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first sentence: laws of the State or Territory.

Download from Www.Somanuals.com. All Manuals Search And Download.

CAMBODIA, LAOS, AND VIETNAM

Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first sentence: laws of the State of New York.

The following is added to this Section:

Disputes and differences arising out of or in connection with this Agreement shall be finally settled by arbitration which shall be held in Singapore in

accordance with the rules of the International Chamber of Commerce (ICC). The arbitrator or arbitrators designated in conformity with those rules shall

have the power to rule on their own competence and on the validity of the Agreement to submit to arbitration. The arbitration award shall be final and

binding for the parties without appeal and the arbitral award shall be in writing and set forth the findings of fact and the conclusions of law.

All proceedings shall be conducted, including all documents presented in such proceedings, in the English language. The number of arbitrators shall be

three, with each side to the dispute being entitled to appoint one arbitrator.

The two arbitrators appointed by the parties shall appoint a third arbitrator before proceeding upon the reference. The third arbitrator shall act as chairman

of the proceedings. Vacancies in the post of chairman shall be filled by the president of the ICC. Other vacancies shall be filled by the respective

nominating party. Proceedings shall continue from the stage they were at when the vacancy occurred.

If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other party appoints its, the first appointed arbitrator

shall be the sole arbitrator, provided that the arbitrator was validly and properly appointed. The English language version of this Agreement prevails over

any other language version.

HONG KONG AND MACAU

Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first sentence: laws of Hong Kong Special

Administrative Region

INDIA

Limitation of Liability: The following replaces items 1 and 2 of this Section:

1. liability for bodily injury (including death) or damage to real property and tangible personal property will be limited to that caused by IBM’s

negligence;

2. as to any other actual damage arising in any situation involving nonperformance by IBM pursuant to, or in any way related to the subject of this

Statement of Limited Warranty, IBM’s liability will be limited to the charge paid by you for the individual Machine that is the subject of the claim.

JAPAN

Governing Law: The following sentence is added to this Section:

Any doubts concerning this Agreement will be initially resolved between us in good faith and in accordance with the principle of mutual trust.

NEW ZEALAND

The IBM Warranty for Machines: The following paragraph is added to this Section:

The warranties specified in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or other legislation which

cannot be excluded or limited. The Consumer Guarantees Act 1993 will not apply in respect of any goods which IBM provides, if you require the goods

for the purposes of a business as defined in that Act.

Limitation of Liability: The following is added to this Section:

Where Machines are not acquired for the purposes of a business as defined in the Consumer Guarantees Act 1993, the limitations in this Section are

subject to the limitations in that Act.

PEOPLE’S REPUBLIC OF CHINA (PRC)

Governing Law: The following is replaces this Section:

Both you and IBM consent to the application of the laws of the State of New York (except when local law requires otherwise) to govern, interpret, and

enforce all your and IBM’s rights, duties, and obligations arising from, or relating in any manner to, the subject matter of this Agreement, without regard

to conflict of law principles. Any disputes arising from or in connection with this Agreement will first be resolved by friendly negotiations, failing which

either of us has the right to submit the dispute to the China International Economic and Trade Arbitration Commission in Beijing, the PRC, for arbitration

in accordance with its arbitration rules in force at the time. The arbitration tribunal will consist of three arbitrators. The language to be used therein will be

English and Chinese. An arbitral award will be final and binding on all the parties, and will be enforceable under the Convention on the Recognition and

Enforcement of Foreign Arbitral Awards (1958). The arbitration fee will be borne by the losing party unless otherwise determined by the arbitral award.

During the course of arbitration, this Agreement will continue to be performed except for the part which the parties are disputing and which is undergoing

arbitration.

EUROPE, MIDDLE EAST, AFRICA (EMEA)

THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES.

The terms of this Statement of Limited Warranty apply to Machines purchased from IBM or an IBM reseller.

Warranty Service:

If you purchase an IBM Machine in Austria, Belgium, Denmark, Estonia, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland or United Kingdom, you may obtain warranty service for that Machine in any

of those countries from either (1) an IBM reseller approved to perform warranty service or (2) from IBM.

Download from Www.Somanuals.com. All Manuals Search And Download.

If you purchased an IBM Personal Computer Machine in Albania, Armenia, Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic,

Georgia, Hungary, Kazakhstan, Kirghizia, Federal Republic of Yugoslavia, Former Yugoslav Republic of Macedonia (FYROM), Moldova, Poland,

Romania, Russia, Slovak Republic, Slovenia, or Ukraine, you may obtain warranty service for that Machine in any of those countries from either (1) an

IBM reseller approved to perform warranty service or (2) from IBM. If you purchase an IBM Machine in a Middle Eastern or African country, you may

obtain warranty service for that Machine from the IBM entity within the country of purchase, if that IBM entity provides warranty service in that country,

or from an IBM reseller, approved by IBM to perform warranty service on that Machine in that country. Warranty service in Africa is available within 50

kilometers of an IBM authorized service provider. You are responsible for transportation costs for Machines located outside 50 kilometers of an IBM

authorized service provider.

Governing Law:

The applicable laws, that govern, interpret and enforce rights, duties, and obligations of each of us arising from, or relating in any manner to, the subject

matter of this Statement, without regard to conflict of laws principles, as well as Country-unique terms and competent court for this Statement are those of

the country in which the warranty service is being provided , except that in 1) Albania, Bosnia-Herzegovina, Bulgaria, Croatia, Hungary, Former Yugoslav

Republic of Macedonia, Romania, Slovakia, Slovenia, Armenia, Azerbaijan, Belarus, Georgia, Kazakhstan, Kyrgyzstan, Moldava, Russia, Tajikistan,

Turkmenistan, Ukraine, and Uzbekistan, the laws of Austria apply; 2) Estonia, Latvia, and Lithuania, the laws of Finland apply; 3) Algeria, Benin, Burkina

Faso, Cameroon, Cape Verde, Central African Republic, Chad, Congo, Djibouti, Democratic Republic of Congo, Equatorial Guinea, France, Gabon,

Gambia, Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Mali, Mauritania, Morocco, Niger, Senegal, Togo, and Tunisia, this Agreement will be construed

and the legal relations between the parties will be determined in accordance with the French laws and all disputes arising out of this Agreement or related to

its violation or execution, including summary proceedings, will be settled exclusively by the Commercial Court of Paris; 4) Angola, Bahrain, Botswana,

Burundi, Egypt Eritrea, Ethiopia, Ghana, Jordan, Kenya, Kuwait, Liberia, Malawi, Malta, Mozambique, Nigeria, Oman, Oman Pakistan, Qatar, Rwanda,

Sao Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda, United Arab Emirates, United Kingdom, West Bank/Gaza, Yemen, Zambia, and

Zimbabwe, this Agreement will be governed by English Law and disputes relating to it will be submitted to the exclusive jurisdiction of the English courts;

and 5) in Greece, Israel, Italy, Portugal, and Spain any legal claim arising out of this Statement will be brought before, and finally settled by, the competent

court of Athens, Tel Aviv, Milan, Lisbon, and Madrid, respectively.

THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED:

AUSTRIA and GERMANY

The IBM Warranty for Machines: The following replaces the first sentence of the first paragraph of this Section: The warranty for an IBM Machine

covers the functionality of the Machine for its normal use and the Machine’s conformity to its Specifications.

The following paragraphs are added to this Section:

The minimum warranty period for Machines is six months. In case IBM or your reseller is unable to repair an IBM Machine, you can alternatively ask for a

partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and

get your money refunded.

Extent of Warranty: The second paragraph does not apply.

Warranty Service: The following is added to this Section:

During the warranty period, transportation for delivery of the failing Machine to IBM will be at IBM’s expense.

Limitation of Liability: The following paragraph is added to this Section:

The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages caused by IBM with fraud or gross negligence and

for express warranty.

The following sentence is added to the end of the first paragraph of item 2:

IBM’s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence.

EGYPT

Limitation of Liability: The following replaces item 2 in this Section:

as to any other actual direct damages, IBM’s liability will be limited to the total amount you paid for the Machine that is the subject of the claim. For

purposes of this item, the term “Machine” includes Machine Code and Licensed Internal Code.

Applicability of suppliers and resellers (unchanged).

FRANCE

Limitation of Liability: The following replaces the second sentence of the first paragraph of this Section:

In such instances, regardless of the basis on which you are entitled to claim damages from IBM, IBM is liable for no more than:

(items 1 and 2 unchanged).

IRELAND

Extent of Warranty: The following is added to this Section:

Except as expressly provided in these terms and conditions, all statutory conditions, including all warranties implied, but without prejudice to the generality

of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and Supply of Services Act 1980 are hereby excluded.

Limitation of Liability: The following replaces items one and two of the first paragraph of this Section:

1. death or personal injury or physical damage to your real property solely caused by IBM’s negligence; and

Download from Www.Somanuals.com. All Manuals Search And Download.

2. the amount of any other actual direct damages, up to 125 percent of the charges (if recurring, the 12 months’ charges apply) for the Machine that is the

subject of the claim or which otherwise gives rise to the claim.

Applicability of suppliers and resellers (unchanged).

The following paragraph is added at the end of this Section:

IBM’s entire liability and your sole remedy, whether in contract or in tort, in respect of any default shall be limited to damages.

ITALY

Limitation of Liability: The following replaces the second sentence in the first paragraph:

In each such instance unless otherwise provided by mandatory law, IBM is liable for no more than:

1. (unchanged)

2. as to any other actual damage arising in all situations involving non-performance by IBM pursuant to, or in any way related to the subject matter of this

Statement of Warranty, IBM’s liability, will be limited to the total amount you paid for the Machine that is the subject of the claim.

Applicability of suppliers and resellers (unchanged).

The following replaces the second paragraph of this Section:

Unless otherwise provided by mandatory law, IBM and your reseller are not liable for any of the following: (items 1 and 2 unchanged) 3) indirect damages,

even if IBM or your reseller is informed of their possibility.

SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND

Limitation of Liability: The following is added to this Section:

IBM’s entire liability to you for actual damages arising in all situations involving nonperformance by IBM in respect of the subject matter of this Statement

of Warranty will be limited to the charge paid by you for the individual Machine that is the subject of your claim from IBM.

UNITED KINGDOM

Limitation of Liability: The following replaces items 1 and 2 of the first paragraph of this Section:

1. death or personal injury or physical damage to your real property solely caused by IBM’s negligence;

2. the amount of any other actual direct damages, up to 125 percent of the charges (if recurring, the 12 months’ charges apply) for the Machine that is the

subject of the claim or which otherwise gives rise to the claim;

The following item is added to this paragraph:

3. breach of IBM’s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982.

Applicability of suppliers and resellers (unchanged).

The following is added to the end of this Section:

IBM’s entire liability and your sole remedy, whether in contract or in tort, in respect of any default will be limited to damages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Environmental Labelling of Personal Computers

You have just purchased a TCO’95 approved and labelled product! Your

Congratulations!

choice has provided you with a product developed for professional use. Your

purchase has also contributed to reducing the burden on the environment and

to the further development of environmentally-adapted electronic products.

In many countries, environmental labelling has become an established method

for encouraging the adaptation of goods and services to the environment. The

m ain problem as far as com puters and other electronic equipm ent are

concerned is that environmentally harmful substances are used both in the

products and during their manufacture. Since it has not been possible so far

for the majority of electronic equipment to be recycled in a satisfactory way,

most of these potentially damaging substances sooner or later enter Nature.

Why do we have

environmentally

labelled computers?

Th e re a re a ls o o th e r ch a ra cte ris tics o f a co m p u te r, s u ch a s e n e rg y

consum ption levels, that are im portant from both the working and natural

environment viewpoints. Since all types of conventional electricity generation

have a negative effect on the environm ent (acidic- and clim atic-influencing

emissions, radioactive waste, etc.), it is vital to conserve energy. Electronic

equipm ent in offices consum es as enorm ous am ount of energy, since it is

often routinely left running continuously.

What does the

environmenal

labelling involve?

This product meets the requirements for the TCO’95 scheme, which provides

for international environmental labelling of personal computers. The labelling

s ch e m e w a s d e ve lo p e d a s a jo in t e ffo rt b y th e TCO (Th e S w e d is h

Confederation of Professional Em ployees), Naturckyddsföreningen (The

Swedish Society for Nature Conservation), and NUTEK (The National Board for

Industrial and Technical Developm ent in Sweden), and SEMKO AB (an

international certification agency).

The requirem ents cover a wide range of issues: environm ent, ergonom ics,

usability, emission of electrical and magnetic fields, energy consumption and

electrical and fire safety.

What does the

environmenal

labelling involve?

The environmental demands concern, among other things, restriction on the

presence and use of heavy m etals, brom inated and chlorinated flam e

retardants, CFCs (freons), and chlorinated solvents. The product m ust be

p re p a re d fo r re cyclin g , a n d th e m a n u fa ctu re r is o b lig e d to h a ve a n

environm ental plan, which m ust be adhered to in each country where the

company implements its operational policy.

Download from Www.Somanuals.com. All Manuals Search And Download.

The energy requirements include a demand that the computer and/or display,

after a certain period of inactivity, shall reduce its power consumption to a

lower level, in one or more stages. The length of time to reactivate the

computer shall be reasonable for the user.

Labelled products must meet strict environmental demands, for example, in

respect of the reduction of electric and magnetic fields, along with physical

and visual ergonomics and good usability.

The following is a brief summary of the environmental requirements met by

this product. The complete environmental criteria document may be ordered

from:

TCO Development Unit

Linnegatan 14, S-11494 Stockholm, Sweden

FAX +46-8 782 92 07

E-mail (Internet): [email protected]

Current information regarding TCO’95 approved and labelled products may

also be obtained on the Internet using the address:

http://www.tco-info.com/

TCO’95 is a co-operative project between:

NUTEK

Naturskydds

föreningen

SEMKO

Närings- och teknikutvecklingsverket

Environmental

requirements

Brominated flame retardants are present in printed circuit boards, cabling,

casings, and housings, and are added to delay the spread of fire. Up to 30% of

the plastic in a computer casing can consist of flame-retardant substances.

These are related to another group of environmental toxins, PCBs, and are

suspected of giving rise to similar harm, including reproductive damage in

fish-eating birds and mammals. Flame retardants have been found in human

blood, and researchers fear that they can disturb fetus development.

Bio-accumulative TCO’95 demands require that plastic components

weighing more than 25 grams must not contain flame retardants with

organically bound chlorine or bromine.

Lead can be found in picture tubes, display screens, solder, and capacitors.

Lead damages the nervous system and in higher doses causes lead poisoning.

The relevant bio-accumulative TCO’95 requirement permits the inclusion of

lead, as no replacement has yet been developed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cadmium is present in rechargeable batteries and in the color-generating

layers of certain computer displays. Cadmium damages the nervous system

and is toxic in high doses. The relevant bio-accumulative TCO’95

requirement states that batteries may not contain more than 25 ppm (parts

per million) of cadmium. The color-generating layers of display screens

must not contain any cadmium.

Mercury is sometimes found in batteries, relays and switches. Mercury

damages the nervous system and is toxic in high doses. TCO’95 requirement

states that batteries may not contain more than 25 ppm (part oer million) of

mercury. It also demands that no mercury is present in any of the electrical

or electronics components concerned with the display unit. Mercury is, for

the time being, permitted in the back light system of flat panel monitors as

there today is no commercially available alternative. TCO aims on removing

this exception when a mercury free alternative is available.

CFCs (freons) are sometimes used for washing printed circuit boards and in

the manufacture of expanded foam for packaging. CFCs break down ozone and

thereby damage the ozone layer in the atmosphere, causing increased

reception on Earth of ultra-violet light with consequent increased risks of

skin cancer (malignant melanoma). The relevant TCO’95 requirement:

Neither CFCs nor HCFCs may be used during the manufacture of the product or

its packaging.

Shipping Package

The packaging material can be recycled, or you can save it to return the

monitor to a service center for repair or disposal.

CFC Compounds in

Distribution Packaging

Cushioning material used for shipping finished monitors are not

manufactured with nor do they contain any CFC compounds.

Design for

Disassembly/

Recycling

These monitors have been designed for easy end-of-life disassembly and

recycling. Fasteners are generally of the same type for efficient disassembly.

Components made of different materials can be easily separated and plastics

have been identified using intermational symbols to aid in recycling.

Monitor Disposal

ATTENTION

If you need to dispose of a monitor, ask a qualified service

representative for the proper procedure. Improper disposal

could result in personal injury from implosion.

1 _{Bio-accumulative means that the substance accumulates within living organisms.}

Download from Www.Somanuals.com. All Manuals Search And Download.

Environmental Labelling of Personal Computers

Congratulations!

You have just purchased a TCO’99 approved and labelled product! Your choice

has provided you with a product developed for professional use. Your purchase

has also contributed to reducing the burden on the environment and also to the

further development of environmentally adapted electronics products.

Why do we have

environmentally

labelled computers?

In many countries, environmental labelling has become an established method

for encouraging the adaptation of goods and services to the environment. The

main problem, as far as computers and other electronics equipment are

concerned, is that environmentally harmful substances are used both in the

products and during their manufacture. Since it is not so far possible to

satisfactorily recycle the majority of electronics equipment, most of these

potentially damaging substances sooner or later enter nature.

There are also other characteristics of a computer, such as energy

consumption levels, that are important from the viewpoints of both the work

(internal) and natural (external) environments. Since all methods of

electricity generation have a negative effect on the environment (e.g. acidic

and climate-influencing emissions, radioactive waste), it is vital to save

energy. Electronics equipment in offices is often left running continuously and

thereby consumes a lot of energy.

What does labelling

involve?

This product meets the requirements for the TCO’99 scheme which provides

for international and environmental labelling of personal computers. The

labelling scheme was developed as a joint effort by the TCO (The Swedish

Confederation of Professional Employees), Svenska Naturskyddsforeningen

(The Swedish Society for Nature Conservation) and Statens Energimyndighet

(The Swedish National Energy Administration).

Download from Www.Somanuals.com. All Manuals Search And Download.

Approval requirements cover a wide range of issues: environment,

ergonomics, usability, emission of electric and magnetic fields, energy

consumption and electrical and fire safety.

The environmental demands impose restrictions on the presence and use of

heavy metals, brominated and chlorinated flame retardants, CFCs (freons)

and chlorinated solvents, among other things. The product must be prepared

for recycling and the manufacturer is obliged to have an environmental policy

which must be adhered to in each country where the company implements its

operational policy.

The energy requirements include a demand that the computer and/or display,

after a certain period of inactivity, shall reduce its power consumption to a

lower level in one or more stages. The length of time to reactivate the

computer shall be reasonable for the user.

Labelled products must meet strict environmental demands, for example, in

respect of the reduction of electric and magnetic fields, physical and visual

ergonomics and good usability.

Below you will find a brief summary of the environmental requirements met

by this product. The complete environmental criteria document may be

ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): [email protected]

Current information regarding TCO’99 approved and labelled

products may also be obtained via the Internet, using the address:

http://www.tco-info.com/

Download from Www.Somanuals.com. All Manuals Search And Download.

Environmental Flame retardants

Flame retardants are present in printed circuit boards, cables, wires,

requirements

casings and housings. Their purpose is to prevent, or at least to delay the

spread of fire. Up to 30% of the plastic in a computer casing can consist of

flame retardant substances. Most flame retardants contain bromine or

chloride, and those flame retardants are chemically related to another group

of environmental toxins, PCBs. Both the flame retardants containing bromine

or chloride and the PCBs are suspected of giving rise to severe health effects,

including reproductive damage in fish-eating birds and mammals, due to the

bio-accumulative* processes. Flame retardants have been found in human

blood and researchers fear that disturbances in foetus development may

occur.

The relevant TCO’99 demand requires that plastic components weighing more

than 25 grams must not contain flame retardants with organically bound

bromine or chlorine. Flame retardants are allowed in the printed circuit

boards since no substitutes are available.

Cadmium**

Cadmium is present in rechargeable batteries and in the colour-generating

layers of certain computer displays. Cadmium damages the nervous system

and is toxic in high doses. The relevant TCO’99 requirement states that

batteries, the colour-generating layers of display screens and the electrical

or electronics components must not contain any cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and switches. Mercury

damages the nervous system and is toxic in high doses. TCO’99 requirement

states that batteries may not contain more than 25 ppm (part oer million) of

mercury. It also demands that no mercury is present in any of the electrical

or electronics components concerned with the display unit. Mercury is, for

the time being, permitted in the back light system of flat panel monitors as

there today is no commercially available alternative. TCO aims on removing

this exception when a mercury free alternative is available.

CFCs (freons)

The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be

used during the manufacture and assembly of the product. CFCs (freons) are

sometimes used for washing printed circuit boards. CFCs break down ozone

and thereby damage the ozone layer in the stratosphere, causing increased

reception on earth of ultraviolet light with e.g. increased risks of skin cancer

(malignant melanoma) as a consequence.

Lead**

Lead can be found in picture tubes, display screens, solders and capacitors.

Lead damages the nervous system and in higher doses, causes lead poisoning.

The relevant TCO’99 requirement permits the inclusion of lead since no

replacement has yet been developed.

* Bio-accumulative is defined as substances which accumulate within living organisms

** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.

Download from Www.Somanuals.com. All Manuals Search And Download.

Service Information

The following parts are for use by IBM service, or IBM authorised dealers, to support the customer

warranty. Parts are for service use only.

P/NO

Description

FRU Monitor

FRU Video

Interface

Video

Color

MTM

22P7473

22P7474

22P7475

Hybrid

Analog

Stealth Black

Pearl White

Black

6653-HG2

6653-HW2

Cable

22P7476

FRU Video

Interface

Digital

Black

Cable

22P7477

22P7478

22P7479

FRU Stand

FRU Power

Supply

Hybrid

Stealth Black

Pearl White

Download from Www.Somanuals.com. All Manuals Search And Download.

Compliances

Federal Communications Commission (FCC) Statement

IBM T545H color monitor

Tested To Comply

With FCC Standard

FOR HOME OR OFFICE USE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult an IBM authorized dealer or service representative for help.

Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits.

Proper cables and connectors are available from IBM authorized dealers. IBM is not responsible for any radio

or television interference caused by using other than recommended cables and connectors or by

unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void

the user’s authority to operate the equipment.

Power Cords

For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM

product. To avoid electrical shock, always use the power cord and plug with a properly grounded power

outlet.

IBM power cords used in the United States and Canada are listed by the Underwriter’s Laboratories

(UL) and certified by the Canadian Standards Association (CSA).

For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified cord set consisting of

a minimum 18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet in length and a

parallel blade, grounding-type attachment plug rated 15 amperes, 125 volts.

For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and CSA-certified cord set

consisting of a minimum 18 AWG, type SVT or SJT, three-conductor cord, a maximum of 15 feet in

length and a tandem blade, grounding-type attachment plug rated 15 amperes, 250 volts.

Download from Www.Somanuals.com. All Manuals Search And Download.

For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a grounding-type

attachment plug. The cord set should have the appropriate safety approvals for the country in which

the equipment will be installed.

IBM power cords for a specific country or region are usually available only in that country or region.

IBM Fig. #

(Plug Stnd.)

IBM P/N

(1.8M)

Regions

6952301 US, Canada, Mexico, Brazil, Costa Rica, Peru,

Colombia, Ecuador, Venezuela, Bolivia,

(NEMA 5-15P)

125V

Panama, El Salvador, Honduras, Nicaragua,

Dominican Republic, Guatemala, Taiwan,

Saudi Arabia, Thailand, Phillipines, Japan

US, Canada, Mexico, Brazil, Costa Rica, Peru,

Colombia, Ecuador, Venezuela, Bolivia,

Panama, El Salvador, Honduras, Nicaragua,

Dominican Republic, Guatemala, Taiwan,

Saudi Arabia, Thailand, Phillipines, Japan

1838576

(NEMA 6-15P)

250V

Australia, New Zealand

13F9939

13F9978

(AS/NZS C112)

France, Germany, Sweden, Norway, Austria,

Netherlands, Finland, Belgium, Bosnia, Croatia,

Egypt, Greece, Hungary, Poland, Portugal,

Romania, Slovenia, Spain, Sweden, Turkey,

Iceland, Estonia, Lativa, Lithuania,

(CEE 7 - VII)

Luxembourg, Andorra, Guadeloupe, French

Guyana, Martinique, Monaco, New Caledonia,

Madagascar, Mauritius, Greece, Turkey,

Portugal, Albania, Armenia, Azerbaidjan,

Belarus, Bosnia, Crotia, Czech Republic,

Georgia, Hungary, Kazakhstan, Kyrhgistan,

Macedonia, Moldavia, Poland, Romania,

Serbia, Slovakia, Slovenia, Tajikistan,

Turkmenistan, Ukranine, Uzbekistan, Russia,

Lebanaon, Syria, Egypt, Iran, Algeria, Benin,

Cape Verde, Burkina Faso, Cameroon, Central

African Republic, Chad, Congo (Republic of),

Congo (Democratic Republic of), Djibouti,

Equatorial Guinea, Gabon, Guinea, Guinea

Bissau, Ivory Coast, Mali, Mauritania, Morocco,

Niger, Senegal, Togo, Tunisia, Angola,

Burundi, Ethiopia, Mozambique, Rwanda,

Somalia, Sao Tome, Eritrea, Mayotte,

Comoros, Reunion, French Polynesia,

Vanuatu, Wallis and Futuna, Korea, Vietnam,

Indonesia

Download from Www.Somanuals.com. All Manuals Search And Download.

14F0032 UK, United Arab Emirate (Dubai), China (Hong

Kong S.A.R.), Singapore, Malaysia, Ireland,

Cyprus, Bahrain, Jordan, Kuwait, Oman,

Quatar, Yemen, Gambia, Malta, Botswana,

Seychelles, Nigeria, Ghana, Kenya, Liberia,

Malawi, Sierra Leone, Sudan, Tanzania,

Zambia, Zimbabwe

(BS 1363/A)

13F9996

Denmark

(DK2-5a)

Italy, Chile

14F0068

36L8879

(CEI 23-16)

Argentina, Uruguay, Paraguay,,

(IRSM 2073)

02K0545

14F0086

China

Israel

(GB 2099.1)

(SI 32)

South Africa, India, Sri Lanka, Pakistan,

Uganda, Lesotho, Nambia, Swaziland

14F0014

14F0050

(SABS 164)

Switzerland, Lichtenstein

(1011-S24507)

Industry Canada Class B emission compliance statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel

brouilleur du Canada.

Avis de conformité à la réglementation d'Industrie Canada

Cet appareil numérique de classe B est conforme à la norme NMB-003 du Canada.

As an ENERGY STAR Partner,

IBM Corporation has determined

that this product meets the

ENERGY STAR guidelines for

energy efficiency.

Models 6658-HWX comply with

TCO ’95 guidelines.

Models 6658-HWX comply with

TCO ’99 guidelines.

Download from Www.Somanuals.com. All Manuals Search And Download.

Congratulations!

You have just purchased a TCO99 approved and labeled product! Your choice has provided you with a

product developed for professional use. Your purchase has also contributed to reducing the burden on

the environment and also to the further development of environmentally adapted electronics products.

Why do we have environmentally labeled computers?

In many countries, environmental labeling has become an established method for encouraging the

adaptation of goods and services to the environment. With the growing manufacture and usage of

electronic equipment throughout the world, there is a recognized concern for the materials and

substances used by electronic products with regards to their eventual recycling and disposal. By proper

selection of these materials and substances, the impact on the environment can be minimized. There

are also other characteristics of a computer, such as energy consumption levels, that are important

from the viewpoints of both the work (internal) and natural (external) environments. Electronic

equipment in offices is often left running continuously, resulting in unnecessary consumption of large

amounts of energy and additional power generation. From the standpoint of carbon emissions alone, it

is vital to save energy.

What does labeling involve?

This product meets the requirements for the TCO99 scheme which provides for international and

environmental labeling of personal computers. The labeling scheme was developed as a joint effort by

the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen

(The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National

Energy Administration) Approval requirements cover a wide range of issues: environment, ergonomics,

emission of electric and magnetic fields, energy consumption and electrical safety. Environmental

criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame

retardants, CFCs (freons) and chlorinated solvents, and other materials.

The product must be prepared for recycling and the manufacturer is obliged to have an environmental

policy which must be adhered to in each country where the company implements its operational policy.

Energy requirements include a demand that the computer and/or display, after a certain period of

inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time

to reactivate the computer shall be reasonable for the user.

Labeled products must meet strict environmental demands, for example, in respect of the reduction of

electric and magnetic fields as well as physical and visual ergonomics.

Congratulations!

You have just purchased a TCO95 approved and labeled product! Your choice has provided you with a

product developed for professional use. Your purchase has also contributed to reducing the burden on the

environment and also to the further development of environmentally adapted electronics products.

Why do we have environmentally labeled computers?

In many countries, environmental labeling has become an established method for encouraging the adaptation

of goods and services to the environment. With the growing manufacture and usage of electronic equipment

throughout the world, there is a recognized concern for the materials and substances used by electronic

Download from Www.Somanuals.com. All Manuals Search And Download.

products with regards to their eventual recycling and disposal. By proper selection of these materials and

substances, the impact on the environment can be minimized. There are also other characteristics of a

computer, such as energy consumption levels, that are important from the viewpoints of both the work

(internal) and natural (external) environments. Electronic equipment in offices is often left running

continuously, resulting in unnecessary consumption of large amounts of energy and additional power

generation. From the standpoint of carbon emissions alone, it is vital to save energy.

What does labeling involve?

This product meets the requirements for the TCO99 scheme which provides for international and

environmental labeling of personal computers. The labeling scheme was developed as a joint effort by the

TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The

Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy

Administration) Approval requirements cover a wide range of issues: environment, ergonomics, emission of

electric and magnetic fields, energy consumption and electrical safety. Environmental criteria impose

restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs

(freons) and chlorinated solvents, and other materials. The product must be prepared for recycling and the

manufacturer is obliged to have an environmental policy which must be adhered to in each country where the

company implements its operational policy. Energy requirements include a demand that the computer and/or

display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more

stages. The length of time to reactivate the computer shall be reasonable for the user. Labeled products must

meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields as

well as physical and visual ergonomics.

MPRII

This product complies with Swedish National Council for Metrology (MPR) standards issued in December

1999 (MPRII) for very low frequency (VLF) and Extremely low frequency (ELF) emissions.

Hinweise

Gemäß der Amtsblätter des BMPT Nm. 61Ú1991 und 6Ú1992 wird der Betreiber darauf aufmerksam

gemächt, daß die von ihm mit diesem Gerät zusammengestellte Anlage auch den technischen

Bestimmungen dieser Amtsblätter genügen muß.

Aus ergonomischen Gründen wird empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu

verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast).

Aus ergonomischen Gründen sollten nur Darstellungen auf dunklem Hintergrund bei Vertikalfrequenzen ab 60

Hz (ohne Zeilensprung) benutzt werden.

Die Konvergenz des Bildes kann sich auf Grund des Magnetfeldes am Ort der Aufstellung aus der Korrekten

Grundeinstellung verändern. Zur Korrektur empfiehlt es sich deshalb, die Regler an der Frontseite für H STAT

und V STAT so einzustellen, daß die getrennt sichtbaren Farblinien für Rot. Grün und Blau bei z.B. der

Darstellung eines Buchstabens zur Deckung (Konvergenz) gelangen. Siehe hierzu auch die Erklärungen zu H

STAT und V STAT.

Download from Www.Somanuals.com. All Manuals Search And Download.

European Union (EU) Statement

This product is in conformity with the protection requirements of the EU Council Directive 89/366/ECC on

the approximation of the laws of the Member States relating to electromagnetic compatibility.

IBM can not accept responsibility for any failure to satisfy the protection requirements resulting from a non-

recommended modification of the product, including the fitting of non-IBM option cards.

This product has been tested and found to comply with the limits for Class B Information Technology

Equipment according to CISPR 22 Ú European Standard EN 55022. The limits for Class B equipment

were derived for typical residential environments to provide reasonable protection against interference with

licensed communication devices.

Properly shielded and grounded cables and connectors must be used in order to reduce the potential for

causing interference to radio and TV communications and to other electrical or electronic equipment. Such

cables and connectors are available from IBM authorised dealers.

In accordance with EN 50082-1 1992, Performance Criterion A:, it should be noted that in the presence of

certain electromagnetic fields, some screen jitter may be observed.

Spécifications de la CEE

Ce produit est conforme aux exigences de protection de la directive 89/ 336/ EEC du Conseil de l’UE sur le

rapprochement des lois des États membres en matière de compatibilité électromagnétique.

IBM ne peut accepter aucune responsabilité pour le manquement aux

exi gences de protection résultant d’une modification non recommandée du produit, y compris l’installation

de cartes autres que les cartes IBM.

Ce produit a été testé et il satisfait les conditions de l’équipement

informatique de Classe B en vertu de CISPR22 / Standard européen EN 55022. Les conditions pour

l’équipement de Classe B ont été définies en fonction d’un contexte résidentiel ordinaire afin de fournir une

protection raisonnable contre l’interférence d’appareils de communication autorisés.

Des câbles blindés et correctment reliés à la terre doivent être utilisés pour réduire les risques d’interférence

avec des communications radio et télévisées, ainsi qu’avec des équipements électriques ou électroniques.

Ces câbles et connecteurs sont disponibles auprés de vos revendeurs IBM agréés.

Conformément à la norme EN 50082- 1 1992 (Critére de Performance A), l’utilisateur doit être conscient du

fait qu’en présence de certains champs électroma gnétiques, l’image peut être instable.

Erklärung für die Europäische Union (EU)

Zulassungbescheinigunglaut dem Deutschen Gesetz uber die elektromagnetische Vertraglichkeit von

Geraten (EMVG) vom 30. August

1995 (bzw. der EMC EG Richtlinie 89/336):

Download from Www.Somanuals.com. All Manuals Search And Download.

Dieses Gerat ist berechtigt in Ubereinstimmungmit dem Deutschen EMVG das EG-Konformitatszeichen - CE

- zu fuhren.

Verantwortlich fur die Konformitatserklarung nach Paragraph 5 des EMVG ist die:

IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart.

Informationen in Hinsicht EMVG Paragraph 3 Abs. (2) 2:

Das Gerat erfullt die Schutzanforderungen nach EN 50082-1 und EN 55022 Klasse B.

EN 50082-1 Hinweis:

Wir dieses Gerat in einer industriellen Umgebung betrieben (wie in EN 50082-2 festgetlegt), dann kann es

dabei eventuell gestort werden. In solch einem FAll ist der Abstand bzw. die Abschirmungzu der industriellen

Storquelle zu vergroern.

Anmerkung:

Um die Einhaltung des EMVG sicherzustellen sind die Gerate, wie in den IBM Handbuchern angegeben, zu

installieren und zubetreiben.

Declaración de la Unión Europea (UE)

Este producto satisface los requisitos de protección del Consejo de la UE, Directiva 89/ 336/ CEE en lo que a

la le gislatura de los Estados Miembros sobre compatibilidad electroma gnética se refiere.

IBM no puede aceptar responsabilidad al guna si este producto deja de satisfacer dichos requisitos de

protección como resultado de una modificación no recomendada del producto, inclu yendo el ajuste de

tarjetas de opción que no sean IBM.

Este producto ha sido probado y satisface los límites para Equipos Informáticos Clase B de conformidad con

el Estándar CISPR22 y el Estándar Europeo EN 55022. Los límites para los equipos de Clase B se han

establecido para entornos residenciales típicos a fin de proporcionar una protección razonable contra las

interferencias con dispositivos de comunicación licenciados.

Se deben utilizar concetores y cables debidamente protegidos y conectados a tierra a fin de reducir las

posibilidades de que se produzcan interferencias con comunicaciones por radio o televisión y otros

equipos eléctricos o electrónicos. Este tipo de cables y conectores pueden adquirirse en

concesionarios autorizados de IBM.

De acuerdo con la norma EN 50082- 1 1992, Performance Criterion A, habría que destacar que en

presencia de determinados campos electroma gnéticos, podría observarse una marcada inestabilidad

e la imagen.

Dichiarazione di conformità dell’Unione Europea (EU)

Questo prodotto è conforme alle normative di protezione ai sensi della Direttiva del Consi glio

dell’Unione Europea 89/ 336/ CEE sull’armonizzazione le gislativa degli stati membri in materia di

compatibilità elettromagnetica.

Download from Www.Somanuals.com. All Manuals Search And Download.

IBM non accetta responsabilità alcuna per la mancata conformità alle

normative di protezione dovuta a modifiche non consi gliate al prodotto, compresa l’installazione di

schede e componenti di marca diversa da IBM.

Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti stabiliti per le le

apparecchiature di informatica Classe B ai sensi del CISPR 22 / Norma Europea EN 55022. I limiti

delle apparecchiature della Classe B sono stati stabiliti al fine di fornire ra gionevole protezione da

interferenze mediante dispositivi di comunicazione in concessione in ambienti residenziali tipici.

Utilizzare cavi e connettori colle gati a terra per ridurre il rischio potenziale di interferenza delle

comunicazioni radiotelevisive e di a; tri apparecchi elettrici o elettronici. I cavi sono disponibili presso i

rivenditori IBM.

In accordo con quando previsto nel documento EN 50082- 1 1992,

Performance Criterion A, é importante sottolineare che in presenza di

determinati campi elettroma gnetici é possibile che si verifichi un certo

tremolio delle immagini.

Europeiska unionen (EU)

Denna produkt har testats och följer gränsvärdena för Klass B Information Technology Equipment

enligt CISPR 22 Ú Europeisk standard EN 55022. Gränsvärden för Klass B-utrutning utgår frår vanliga

bostadsomräden för att ge ett rimligt skydd mot störningar i kommunikationsenheter.

Korrekt avskärmade och jordade kablar och kontakter måste användas för att minska risken för

störningar i radio- och TV-kommunikationer och annan elektrisk utrustning. Sådana kablar och

kontakter finns tillgängliga hos auktoriserade IBM-återförsäljare.

I enlighet med EN 50082-1 1992, Performance Criterion A påpekas följande: I närheten av en del

elektromagnetiska fält kan vissa bildstörningar uppstår på skårmen.

Deutsche EMV-Direktive

(electromagnetische Verträglichkeit)

Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG vom 9.Nov.92 das EG-

Konformitätszeichen zu führen.

Der Aussteller der Konformitätserklärung ist die IBM UK, Greenock.

Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse B.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCCI Class B Notice (Japan Only)

This equipment complies with the limits for a Class B digital device (devices used in or adjacent to a

residential environment) and conforms to the standards for information technology equipment that are

set by the Voluntary Control Council for Interference for preventing radio frequency interference in

residential areas.

Japanese statement of compliance for products less than or equal to 20 A per phase:

Mercury Statements

The fluorescent lamp in the liquid crystal display contains mercury. Dispose of it as required by local

ordinances and regulations.

Download from Www.Somanuals.com. All Manuals Search And Download.

Kyocera Cell Phone KYOCERA S2100 User Manual
Land Pride Lawn Mower ZSR60 User Manual
Learning Resources Webcam LER 2240 User Manual
Legacy Car Audio Car Amplifier LA 1099 User Manual
Leviton Surge Protector 120 VAC Junction Box Kit User Manual
LG Electronics Air Conditioner LP121HEM Y8 User Manual
Life Fitness Home Gym FZRW ROW User Manual
Magnavox Portable DVD Player MPD720 User Manual
Makita Chainsaw Sharpener MLS100 User Manual
Mellerware Electric Heater 3 5 5 3 0 User Manual