Lennox Hearth Indoor Fireplace ELDV3530 User Manual

750,20ꢀm  
reV. a 05/2008  
Log PLacement  
guide  
ELDV3530/ELDV4035/ELDV4540  
ELitE SEriES  
Log PLacement guide for eLdV3530/eLdV4035/eLdV4540  
eLite SerieS gaS aPPLianceS  
generaL information  
This log placement guide has been prepared to present detailed place-  
ment illustrations and provide instruction to assist in the initial (new  
appliance) setup and after the annual cleaning and inspection cycles.  
The information provided here is to be used in conjunction with the  
Care and Operation Instructions provided together with this document  
in the appliance literature packet. Please read the Care and Operation  
Instructions completely before completing the procedures detailed in  
this placement guide.  
Figure 1  
glowing embers  
(rockwool)  
main Ports  
glowing embers  
(rockwool)  
initiaL inStaLLation conSiderationS  
If the logs are being installed for the first time, the following para-  
graphs apply:  
DO NOT attempt to install the logs until the appliance installation  
has been completed, the gas line connected and tested for leaks and  
the initial burner operation has been checked out.  
Step ꢀ. Remove the appliance front door.  
Step 2. Cut and remove the nylon strapping securing the log set  
inside the fireplace.  
do not Place  
embers on  
main Ports  
mixture of Vol-  
cano Stone  
& Vermiculite  
Place embers  
in front of  
Ports Here  
Step 3. Remove the logs from their packaging. Handle logs care-  
fully to prevent breakage.  
Figure 2  
Log and gLowing ember PLacement  
Step ꢀ. Position the individual logs as shown in Figures 3, 4 and 5.  
Logs should be placed in the order shown.  
Proper log and twig placement is critical to encourage outstanding  
flame appearance and prevent sooting.  
Step 2. Separate the Glowing Ember (Rockwool) into pieces about  
the size of a nickel (see Figure 1). Keep the pieces fluffed up with  
torn edges and not matted. Distribute these pieces over the burner as  
shown in Figure 2. Do not use more than necessary. When properly  
positioned, the Glowing Embers will cover approximately 10% of the  
burner. Do not place embers on main ports.  
These fires are designed to provide a rich orange/red glow on the logs.  
Rear log (2) placement is critical. An adjustment of one quarter of an  
inch can have significant effect on flame color and height. Pull rear log  
(2) forward as far as it will go on the pins.  
Note: The log set and fire are artistically arranged to provide a random  
asymmetric look to the fire. The fire intentionally does not burn in the  
left rear quarter of the log set.  
Step 3. Place a mixture of volcanic stone and vermiculite around the  
burner as shown. do not place the mixture on the burner.  
Note: Excessive use of embers may result in sooting or poor flame.  
This appliance is provided with enough Glowing Embers for several  
applications, do not feel compelled to use all that is in a new bag. For  
best glowing effect, replace the ember material annually. Replacement  
Glowing Embers are available (Catalog Number 88L53).  
US  
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
eLdV4035 Log PLacement  
Log  
number  
2
description  
1
2
3
4
5
Log, Center  
Log, Rear  
Log, Front  
Log, Left  
4
5
Log, Right  
catalog number for the entire  
log set: H4657  
3
bafe Pins  
align the holes at the bottom of log (4)  
over the pins on logs (ꢀ) and (2)  
bafe  
2
4
3
grate  
assembly  
burner  
align holes at the bottom of log (ꢀ) over the  
pins on the burner  
align groove at the bottom of log (3)  
over the grate as shown.  
Step ꢀ  
Step 3  
align the groove at the bottom of log (5) over the grate as-  
align holes at the bottom of log (2) over the pins  
sembly and on the landing area of log (4) as shown.  
of the back bafe.  
2
4
5
Step 2  
Step 4  
Figure 4  
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
eLdV4540 Log PLacement  
(Repeat StepS 1 thRu 4 FRom eLDV4035 Log pLacemeNt aND theN aDD the FoLLowiNg StepS)  
Log  
number  
4
7
2
description  
1
2
3
4
5
6
7
Log, Center  
Log, Rear  
6
Log, Front  
Log, Left  
Log, Right  
Log, Right/Rear  
Log, Left/Rear  
catalog number for the entire  
log set: H4658  
5
3
Place log (7) over log (4) as shown  
Place log (6) between log (2) and log (5) as shown  
7
4
2
6
5
Step 5  
Step 6  
Figure 5  
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.  
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.  
Consult your local distributor for fireplace code information.  
Printed in U.S.A. © 2006 by Lennox Hearth Products  
LHP  
P/n 750,20ꢀm reV. a 05/2008  
ꢀꢀꢀ0 west taft avenue • orange, ca 92865  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lanier Printer Accessories CP 458 User Manual
LG Electronics CRT Television W1943T User Manual
Liebert Surge Protector SERIES 300 UPS User Manual
Lincoln Electric Welding System MC04 216 User Manual
Link electronic Telephone Door phone User Manual
LOREX Technology Security Camera SG7209P User Manual
LST Home Security System M500RFE AS User Manual
Marantz Home Theater Server DH9500 User Manual
Master Lock Saw MK 470 User Manual
Memorex Flat Panel Television MT1120A User Manual