LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES
STYLE VIEW DOOR KITS
ChARCOAL AND SATIN PEWTER
750,215M
REV. B 08/2007
INSTALLATION INSTRUCTIONS FOR OPTIONAL STYLE VIEW DOOR KITS FOR USE WITh
LENNOx (ELDV) ELITE™ SERIES AND (MPLDV) MERIT™ PLUS SERIES GAS FIREPLACES
STYLE VIEW DOOR KITS
Description
STYLE VIEW DOOR KITS
Description
Cat. No.
Model
Model Series
Cat. No.
Model
ModelSeries
ARCH PANE DESIGN KITS
35” Arch Doors, Charcoal
35” Arch Doors, Satin Pewter
40” Arch Doors, Charcoal
40” Arch Doors, Satin Pewter
45” Arch Doors, Charcoal
45” Arch Doors, Satin Pewter
ARCH PANE DESIGN KITS
30” Arch Doors, Charcoal
30” Arch Doors, Satin Pewter
35” Arch Doors, Charcoal
35” Arch Doors, Satin Pewter
40” Arch Doors, Charcoal
40” Arch Doors, Satin Pewter
45” Arch Doors, Charcoal
45” Arch Doors, Satin Pewter
h3970
h3971
h3973
h3974
h3976
h3977
APDL35C
APDL35SP
APDL40C
APDL40SP
APDL45C
APDL45SP
h6104
h6105
h6106
h6107
h6108
h6109
h6110
h6111
APDML30C
APDML30SP
APDML35C
APDML35SP
APDML40C
APDML40SP
APDML45C
APDML45SP
ELDV35
ELDV40
ELDV45
MPLDV30*
MPLDV35
MPLDV40
MPLDV45
SQUARE PANE DESIGN KITS
35” Square Doors, Charcoal
35” Square Doors, Satin Pewter
40” Square Doors, Charcoal
40” Square Doors, Satin Pewter
45” Square Doors, Charcoal
45” Square Doors, Satin Pewter
h3979
h3980
h3982
h3983
h3985
h3986
Table 1
SPDL35C
SPDL35SP
SPDL40C
SPDL40SP
SPDL45C
SPDL45SP
ELDV35
ELDV40
ELDV45
SQUARE PANE DESIGN KITS
30” Square Doors, Charcoal
30” Square Doors, Satin Pewter
35” Square Doors, Charcoal
35” Square Doors, Satin Pewter
40” Square Doors, Charcoal
40” Square Doors, Satin Pewter
45” Square Doors, Charcoal
45” Square Doors, Satin Pewter
h6096
h6097
h6098
h6099
h6100
h6101
h6102
h6103
Table 2
SPDML30C
SPDML30SP
SPDML35C
SPDML35SP
SPDML40C
SPDML40SP
SPDML45C
SPDML45SP
MPLDV30*
MPLDV35
MPLDV40
MPLDV45
KIT CONTENTS
DESCRIPTION
Door, Left
ITEM
QUANTITY
1 ea.
1
2
3
1 ea.
Door, Right
KIT CONTENTS
1 ea.
Doorframe Assembly
ITEM QUANTITY
DESCRIPTION
4
1 ea.
Instruction Sheet
1
2
3
1 ea.
1 ea.
1 ea.
Door, Left
Door, Right
*30” Doors Feature
A Single Piece Non-Operable Facade Panel
TOOLS REQUIRED - None
Doorframe Assembly
4
5
2 ea.
1 ea.
Door Clip
Read and understand all instructions and warnings in this
document before beginning the installation.
Instruction Sheet
Arch Pane Design
Arch Pane Door/Facade Design
Square Pane Design
Square Pane Door/Facade Design
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tabs engage into
slots (both sides)
hook Doorframe
Over Glass door
Slot
Tab
Fireplace
Doorframe
Locate the doorframe
bracket on the lower
front of the doorframe and
lock it behind the cabinet bottom
flange as shown here.
Doorframe
Bracket
Figure 5 - MPLDV Models
Detail Showing
Glass Door Clip
Being Put Into
Place Between
Doorframe And
Glass Door
Locate slot on
each side
Figure 4 - ELDV Models
d. ELDV Models - Locate slots on each side of fireplace
(see Figure 4).
e. ELDV Models - Hold the top of the door frame slightly away from
the fireplace front while aligning the tabs on door frame with the
corresponding slots on fireplace. While the tabs engage, slide the
top of the door frame so that it goes over the top of glass door
assembly (see Figures 4 & 7).
f. MPLDV Models - Locate the top of the door frame and identify the
return flange. Position the door frame in front of the glass door
assembly and hook the door frame over it at the top. Let the door
frame fall into place. Position the door frame right to left and use
the clips to engage the door frame and glass door assembly, to
lock it (lower left and right corners of the opening). The clip will
slide between the metal frame of the glass door assembly and the
glass. Refer to Figures 5 and 6.
Door Clip In
Place Between
Doorframe And
Glass Door
*g. Connect the switch wires to the ON/OFF switch. Press the ON/OFF
switch down into the switch mounting bracket on door frame until
it locks in place (see Figure 8).
Figure 6 - MPLDV Models
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Remove the left and right side Style View doors from packaging. Install
them by aligning hinge pins on the doors with the hinge holes on the
doorframe and slide down (see Figure 9 ). Ensure the hinge pins are
fully seated onto the shoulders of the hinge holes.
Note: For MPLDV 30” models, remove single piece facade panel and
mount the four pins into the hinge shoulders.
Insert hinge Pins Into
hinge holes as Shown
hinge
Pin
Door
Figure 7 - Doorframe Installed
Figure 9
ON/OFF Switch
ON
OFF
8. Close Doors (see Figure 10).
ON
OFF
ON/OFF Switch Original Location
ON/OFF switch
installed on door-
frame bracket
ON/OFF Switch New Location
Figure 10 - Completed Installation
Figure 8
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and the discontinuance of colors, styles and products.
Consult your local distributor for fireplace code information.
1110 West Taft Avenue
Orange, CA 92865
Printed in U.S.A. © LENNOX HEARTH PRODUCTS 2006
P/N 750,215M REV. B 08/2007
Download from Www.Somanuals.com. All Manuals Search And Download.
|