HEARTH PRODUCTS
KITS AND ACCESSORIES
P/N 504267M
Rev. F, 09/2010
LBF SERIES BI-FOLD GLASS DOORS
INSTALLATION INSTRUCTIONS FOR LBF SERIES BI-FOLD GLASS DOORS
36LBF/ LBF-BB • 38LBF/LBF-BB/LBF-BS • 42LBF /LBF-BB • 43LBF /LBF-BB /LBF-BS • 50LBF /LBF-BB
WARNING
THIS KIT IS TO BE INSTALLED BY A QUALIFIED
SERVICE TECHNICIAN OR OTHER QUALIFIED AGENCY
IN ACCORDANCE WITH THE MANUFACTURER’S
INSTRUCTIONS AND ALL CODES AND REQUIREMENTS OF
THE AUTHORITY HAVING JURISDICTION IN THE USA OR
CANADA. IF THESE INSTRUCTIONS ARE NOT FOLLOWED
EXACTLY, A FIRE OR EXPLOSION MAY RESULT, CAUSING
Figure 1
PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF
LIFE. THE QUALIFIED AGENCY PERFORMING THIS WORK
ASSUMES RESPONSIBILITY FOR THIS INSTALLATION.
GENERAL INFORMATION
The bi-fold glass door assemblies listed in this Instruction Sheet are
designed for use with Lennox Hearth Products fireplaces or appliances
that specify 36", 38", 42", 43", or 50" LBF Series doors.
WARNING
Each door assembly consists of a right and left glass panel assembly
with factory-mounted door handles. 36LBF Series and 42LBF Series door
kits also include air deflectors. 50LBF Series door kits also include vent
channels. Each kit also includes a center door clip hardware kit.
HOT FIREPLACES WILL CAUSE SEVERE BURNS.
DO NOT TOUCH GLASS, METAL FRAME OR SCREEN
UNTIL COOLED. NEVER ALLOW CHILDREN TO TOUCH
THESE AREAS.
DONOTALTERORMODIFYTHESEDOORASSEMBLIES,ORAFIREPLACE
MALFUNCTION OR FIRE HAZARD MAY RESULT.
The LBF Series bi-fold glass doors have been tested and listed by Intertek.
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.
KITS
Kit
ALL WARNINGS, PRECAUTIONS, AND INSTRUCTIONS IN THE
INSTALLATION INSTRUCTIONS AND CARE AND OPERATION MANUALS
PROVIDED WITH THE APPLIANCE APPLY TO THESE INSTRUCTIONS.
Model
Finish
36LBF Series Bi-Fold Glass Door Kits
12M17
12M19
36LBF
36LBF-BS
Black
Brushed Stainless
KIT CONTENTS
(Letters in brackets refer to Figure 2.)
38LBF Series Bi-Fold Glass Door Kits
12M20
12M21
12M22
38LBF
38LBF-BB
38LBF-BS
Black
Brass
Brushed Stainless
• 1 ea. Bi-Fold Door, Left [A]
• 1 ea. Bi-Fold Door, Right [A]
• 1 ea. Air Deflector, Left [B]
[A] Left/Right Bi-Fold Doors
(36LBF and 42LBF Series doors only)
• 1 ea. Air Deflector, Right [B]
(36LBF and 42LBF Series doors only)
• 1 ea. Vent Channel, Left [C]
(50LBF Series doors only)
• 1 ea. Vent Channel, Right [C]
(50LBF Series doors only)
42LBF Series Bi-Fold Glass Door Kits
H7962
H7964
42LBF
42LBF-BS
Black
Brushed Stainless
[B] Left/Right Air Deflectors
(36/42LBF Series only)
43LBF Series Bi-Fold Glass Door Kits
12M23
12M24
12M25
43LBF
43LBF-BB
43LBF-BS
Black
Brass
Brushed Stainless
[C] Left/Right Vent Channels
(50LBF Series only)
• 1 ea. Center Door Clip Hardware Kit [D]
• 1 ea. Warranty
50LBF Series Bi-Fold Glass Door Kits
H7965
H7967
50LBF
50LBF-BS
Black
Brushed Stainless
TOOLS NEEDED
• Medium Phillips Screwdriver
• 3/8" Open-end Wrench
[D] Center Door Clip and
Hardware
Figure 2
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
Download from Www.Somanuals.com. All Manuals Search And Download.
LENNOX HEARTH PRODUCTS • LBF SERIES BI-FOLD GLASS DOORS • INSTALLATION INSTRUCTIONS
INSTALLING THE BI-FOLD DOORS
ALIGNING THE BI-FOLD DOORS
Step 1. Refer to Figure 1 on page 1 for correct door position. Starting
with the left door panel, hold it at a slight angle to the door frame outer
edge, with the top of the door tilted toward the center of the firebox.
The doors are properly aligned when the top door trim is in a straight, level
line, and the vertical gap between the doors is even from top to bottom.
To align the bi-fold doors:
Step 2. Swing the lower outer corner of the door over the hole in the
lower frame of the firebox opening, and insert the lower pivot pin into
the hole (Figures 6 and 7, below).
Step 1. Grasp one door handle, and loosen the lower door pivot pin using
a 3/8" open-end wrench.
Note: The upper door pivot pins can be loosened for adjustment
purposes; however, it is easier to loosen the lower pins.
Step 2. Slide the door panel on the hinge pin until the gap between the
upper door trim and upper frame is even.
Step 3. Retighten the lower door pivot pin.
Step 4. If needed, repeat this procedure for the opposite door.
Lower
Pivot Pin
GENERAL OPERATING PRECAUTIONS
AND INSTRUCTIONS
Figure 6: Lower Left Door Panel
CAUTION
Lower
Frame
THESE GLASS DOORS ARE LISTED ONLY FOR USE
WITH FIREPLACES OR APPLIANCES THAT SPECIFY
LBF SERIES BI-FOLD GLASS DOORS. USE ON ANY
OTHER FIREPLACE OR APPLIANCE MAY CONSTITUTE
A POTENTIAL FIRE HAZARD.
Pivot
Point
• Avoid building extremely large fires, as the tempered glass could
become damaged.
Figure 7: Lower Left Door Panel
• Use fireplace tools carefully to avoid striking the glass.
• Keep wire mesh screens closed during fireplace use.
Step 3. Carefully move the top edge of the door assembly until the upper
pivot pin and upper roller pin are inside the upper guide track of the
firebox frame (Figure 8, below).
• Fireplace flue damper must remain open until fire is completely out.
• Ensure that wood and embers are well within the confines of the grate
area and well away from the glass doors.
Pivot Pin
Lock
Roller Pin
• Keep wire mesh screens closed during fireplace use.
• Keep glass doors closed at night when retiring to minimize the loss of
heated room air up the vent.
IMPORTANT: THE FINISH OF THESE DOORS MAY BE PROTECTED
WITH A SELF-ADHERING PLASTIC COATING THAT MUST BE REMOVED
BEFORE HEAT IS GENERATED BY A FIRE IN THE FIREBOX. TO PREVENT
MELTING, ENSURE THAT ANY PLASTIC COATING PROTECTING THE
FINISH OF THESE DOORS IS REMOVED FOLLOWING INSTALLATION.
REFER TO THE FIREPLACE INSTALLATION INSTRUCTIONS AND HO-
MEOWNER'S CARE AND OPERATION INSTRUCTIONS FOR DETAILED
INSTRUCTIONS REGARDING THE MAINTENANCE OF THE FINISH OF
THESE DOORS.
Figure 8
Step 4. Continue to carefully move the door until the upper pivot pin slips
into the upper door guide track hole and engages the spring clip, which
locks it into place (Figure 9, below).
WARNING
Spring Clip
Upper Door
Guide Track
DO NOT BURN TRASH, CONSTRUCTION SCRAPS,
RAILROAD TIES, OR OTHER HIGHLY FLAMMABLE
MATERIAL IN THE FIREPLACE. INTENSE HEAT
CAN CAUSE THE GLASS TO LOSE STRENGTH AND
RESILIENCE, WHICH WILL RESULT IN GLASS
BREAKAGE.
Pivot Pin
Roller Pin
(continued on next page)
Figure 9
3
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
Download from Www.Somanuals.com. All Manuals Search And Download.
LENNOX HEARTH PRODUCTS • BI-FOLD GLASS DOORS • LBF SERIES • INSTALLATION INSTRUCTIONS
GENERAL OPERATING PRECAUTIONS AND INSTRUCTIONS (continued from previous page)
WARNING
WARNING
FRONT-OPEN FIREPLACES SHOULD ONLY BE
OPERATED WITH DOORS FULLY OPEN OR
DOORS FULLY CLOSED.
BE AWARE THAT SAFETY GLASS IS UNPREDICT-
ABLE WHEN HOT, AND MAY BREAK, EXPELLING
HOT GLASS INTO THE ROOM.
MULTI-OPEN FIREPLACES MUST BE OPERATED
WITH DOORS FULLY CLOSED.
WHEN OPERATING WITH DOORS CLOSED,
ADVISE ALL FAMILY MEMBERS TO REMAIN
WELL AWAY FROM THE FIREPLACE TO AVOID
PERSONAL INJURY.
IF DOORS ARE LEFT PARTLY OPEN, FLAME MAY
BE DRAWN OUT OF THE FIREPLACE OPENING,
CREATING RISKS OF BOTH FIRE AND SMOKE.
The bi-fold doors utilize tempered glass that is designed for use with high
temperatures but that also can shatter unexpectedly. Tempered glass
breaks into small particles when it shatters. If the glass in the bi-fold
doors does break, particles of extremely hot glass could be discharged
into the surrounding environment, thereby creating a risk of personal
injury or fire. Observe all operating precautions and instructions to reduce
the risk of personal injury or fire.
CAUTION
GLASS AND METAL FRAMES GET HOT! ALWAYS USE
HANDLES TO OPEN AND CLOSE THE DOORS.
• DO NOT SIT CLOSE TO THE GLASS.
Please refer to the appliance Care and Operation Instructions for proper
operating conditions.
• Extreme temperature changes can cause breakage. IF THE DOORS ARE
COLD, DO NOT BUILD A HOT FIRE AND THEN CLOSE THE DOORS.
Front-open fireplace systems should only be operated with the glass
doors FULLY OPEN or FULLY CLOSED (see Figure 9).
• A chip or scratch creates a weakness in tempered glass that can cause
the glass to break when heated. IF THE GLASS IN THE BI-FOLD DOOR
ASSEMBLY BECOMES SCRATCHED OR CHIPPED, REPLACE THE DOOR
ASSEMBLY.
Multi-open fireplace systems must be operated with the glass doors
FULLY CLOSED (see Figure 9).
Always use the door handles when opening and closing the doors.
CLEANING
• NEVER CLEAN THE GLASS WHEN THE DOORS ARE HOT.
• Ammonia-based cleaners will damage the finish. DO NOT USE AM-
MONIA OR AMMONIA-BASED GLASS OR HOUSEHOLD CLEANERS
TO CLEAN THE GLASS OR DOOR FRAME.
• Take care not to scratch the glass surface. DO NOT USE ABRASIVE
CLEANING PRODUCTS OR MATERIALS.
Fully Open or
Fully Closed
Front-Open Systems
Fully Closed
Multi-Open Systems
To remove dirt and grime from the doors, gently scrub with a soft cloth
dampened with water; and then wipe dry.
Figure 9
To remove stubborn stains from the doors, use a mild non-ammonia
soap solution and soft cloth to gently scrub away the stains. Rinse with
clear water, and then wipe dry.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Lennox Hearth Products reserves the right to make changes at any time, without notice, in
design, materials, specifications, orprices, andalsotodiscontinuecolors, stylesandproducts.
Consult your local distributor for fireplace code information.
Printed in U.S.A. © 2000 Lennox Hearth Products
P/N 504267M REV. F 09/2010
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|