Lennox Hearth Bluetooth Headset M5390 User Manual

M5390  
USER MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you  
Thank you for purchasing the Jabra M5390 Multiuse headset.  
The Jabra M5390 Multiuse headset is supplied together with the Jabra A335w Dongle and the Jabra M5390 Multiuse base.  
This unique combination allows you to use one single headset for all your communication needs. The Jabra M5390 Multiuse  
headset connects simultaneously to mobile phones and desk phones - or to mobile phones and PC softphones.  
The headset base and the headset are used together with your desk phone.  
The dongle allows the headset to communicate with a softphone such as Microsoft Office Communicator, Skype or Cisco IP  
Communicator, etc. through your PC or laptop.  
The headset can also be connected directly to your Bluetooth®-enabled mobile phone.  
Furthermore, the headset and dongle have been optimised for the new wideband technology and are compliant to the  
TIA-920 specifications that ensure clear and crisp voice reception and transmission (wideband is only supported between  
the dongle and the headset).  
Contents  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
10.  
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Fitting the headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Setting up your desk phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Setting up your mobile phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Making a call from your desk phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Answering a call from your desk phone . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Making and answering a call from your mobile phone . . . . . . . . . . . . . . . .10  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Reset/Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Using the Jabra M5390 Multiuse Headset with multiple  
Bluetooth®-enabled devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
11.  
12.  
13.  
14.  
15.  
Operating devices in multiuse scenarios . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Switching between Base and Jabra A335w Dongle in a multiuse scenario . .17  
Troubleshooting & FAQ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Maintenance, safety and disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Appendix – GN 1000 Remote Handset Lifter (RHL) (optional accessory) . . .19  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Overview  
4
9
5
3
2
23  
17  
10  
18  
1
6
16  
11  
22  
12  
15  
8
21  
13  
14  
19  
7
20  
Headset  
[1] Visual indicator  
Base unit  
[9] Charge cradle  
[10] Visual indicator  
[11] Clear dial tone switch  
[12] AUX port  
Cords & adapters  
[19] Connection cord  
[20] AC power adapter  
[21] Dongle  
[22] Travel charger  
[23] USB cable for travel  
charger  
[2] Answer/End button  
[3] Volume up/down  
[4] Ear hook  
[5] Mute button  
[6] Microphone  
[13] Telephone port  
[14] Handset port  
[7] Reset button  
[8] Snap-on cover (replaceable)  
[15] AC power adapter port  
[16] Transmit volume  
[17] Reset button  
[18] Headset switch  
Definition of “Tap, double tap and press”:  
Tap = Button press for up to 0.8 sec.  
Press = Button press for longer than 0.8 sec, and release before 1.5 sec. Tone indication is heard.  
Double tap = Two taps made within 0.5 sec.  
!
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Fitting the headset  
Fitting to ear  
2.1 Open hinged ear hook as  
wide as possible. 1)  
2.1  
2.2  
2.2 Hold headset to the ear so  
speaker fits comfortably and  
microphone points towards the  
mouth.  
2.3 Close hinged ear hook over  
the ear.  
2.3  
2.4  
2.4 Adjust ear hook for a  
comfortable fit.  
Fitting to left ear  
2.5  
2.5 Pull ear hook hinge from the  
slot and insert it on opposite  
side of headset marked with L.  
Perform steps 2.1 – 2.4 above.  
1)  
Note: The headset is configured for use with the right ear.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Setting up your desk phone  
If your telephone has a headset  
port, go directly to 3.2b.  
3.1  
3.1 Unplug handset cord from  
your telephone and connect to  
the port on base unit marked  
with  
.
3.2a  
3.2a Connect enclosed telephone  
cord to the now empty handset  
port on telephone, and to the port  
on base unit marked with  
.
3.2b (Headset port use only)  
3.2b  
Connect enclosed telephone cord  
to the headset port on telephone,  
and to the port on base unit marked  
with  
.
3.3 Connect AC power adapter  
to port on bottom of base unit,  
then connect to AC power outlet.  
If the headset is disconnected,  
the indicator on the base will  
flash green.  
3.3  
Note: AUX port is used for Remote Handset Lifter (RHL). Please refer to Appendix.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.4 Place headset in charge  
cradle and charge for a minimum  
of 30 min. before use. A full  
charge takes about 2 hours.  
Visual indicator on headset will  
flash green while headset is  
charging, and light steady green  
when fully charged. The same  
procedure is to be followed when  
using the travel charger.  
3.4  
3.5 Turn on headset by pressing  
Answer/End button for 1 sec.  
(visual indicator will flash blue  
four times and headset will beep  
three times), or by placing headset  
in charge cradle. Turn off headset  
by pressing Answer/End button  
for 2 sec. (visual indicator will  
flash blue four times and headset  
will beep three times).  
3.5  
2 sec  
Clear dial tone  
3.6 Take headset out of charge  
3.6  
3.7  
cradle and put it on.  
3.7 Lift handset from telephone  
and listen for a dial tone in headset.  
3.8 If dial tone is missing or unclear,  
slowly slide the clear dial tone  
switch on bottom of base unit  
through the 3 settings.  
3.8  
3.9  
3.9 Set switch to the position  
that gives the clearest dial tone.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting transmit volume  
3.10 Make a call (see section 4)  
to someone who can act as a test  
person.  
3.10  
3.11 Adjust outgoing volume with  
transmit volume control on base  
unit. Switch through the 3 settings  
until test person confirms the  
appropriate volume. 1)  
3.11  
Setting incoming volume  
3.12 During a call, adjust incoming  
volume by pressing Volume button  
on headset.  
3.12  
3.13  
3.13 A tone in headset will indicate  
when min./max. volume is reached.  
1)  
Note: If you can hear your own voice, transmit volume is probably too high. Reduce volume setting on your  
desk phone (if available feature) and compensate by increasing volume on headset.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Setting up your mobile phone  
Setup  
Pairing your headset with your mobile phone  
NOTE: Before use, please charge your headset (see 3.4).  
Before using your Jabra M5390 Multiuse headset with a mobile phone, you need to pair it with  
your mobile phone.  
Make sure the headset is off.  
During start-up keep pressing the Answer/End button for three seconds. Alternatively remove  
the snap-on cover and press the reset button on the headset for three seconds. The visual  
indicator on headset will light constant blue. (see 9.1)  
Set your Bluetooth® phone to ‘discover’ the Jabra M5390 Multiuse headset:  
o Follow your phone’s User Manual. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’  
menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth® device.  
o Your phone will find the Jabra M5390 Multiuse headset and ask if you want to pair with it.  
Accept pairing by pressing Yes/OK (or similar) on the phone and confirm with the passkey or  
PIN ‘0000’ (4 zeros).  
Your phone will confirm when pairing is complete. If pairing is unsuccessful, repeat the steps  
above. Some mobile phones require manual connection after pairing. Note that on some mobile  
phones, the headset has to be set as “Trusted device”.  
NOTE: If you accidentally put the headset into pairing mode, tap the Answer/End button to exit  
pairing mode.  
IMPORTANT: The same headset can be paired with multiple mobile phones. However, if you  
have multiple mobile phones paired, switched on and within range of the headset, the headset will  
not be able to connect to the base. It is only possible to be connected to one mobile phone and the  
headset base at a time. To be able to connect to the headset base, only have one paired mobile  
phone turned on and within range of the headset.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Making a call from your desk phone  
5.1 Put on headset. 1)  
5.1  
5.2  
5.2 Lift handset from telephone,  
or press telephone´s “line” button  
if connected to the headset port.  
Then tap Answer/End button to  
transfer the call to headset.  
5.3 Wait for dial tone, then dial  
number.  
5.4  
5.3  
5.4 To end call, tap the Answer/  
End button on the headset and  
replace handset on telephone,  
or press telephone’s “end call”  
button if base is connected directly  
to telephone’s headset port.  
Making a call with handset  
5.5 Place headset in charge cradle.  
5.6  
5.5  
5.6 Use handset as usual.  
1)  
Note: If making a call with telephone handset, make sure the headset is placed in charge cradle.  
Otherwise, the call will be routed through to the headset.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Answering a call from your desk phone  
6.1 Put on headset. 1)  
6.2  
16.1  
6.2 Lift handset from telephone,  
or press telephone’s “line” button  
if connected to the headset port.  
Then tap Answer/End button to  
transfer the call to headset.  
6.3 To end call, tap the Answer/  
End button on the headset and  
replace handset on telephone,  
or press telephone’s “end call”  
button if base is connected directly  
to telephone’s headset port.  
6.3  
Switching from handset to  
headset  
6.4  
6.4 During a call using telephone  
handset, take headset from charge  
cradle. Tap Answer/End button and  
the call will automatically be routed  
to the headset. 1)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching from headset to  
handset  
6.5  
6.5 During a call using the headset,  
pick up telephone handset and replace  
headset in charge cradle. The call will  
not be routed through to the telephone  
handset until headset is in the charge  
cradle.  
1)  
Important: Do not replace handset on telephone as this will disconnect the call.  
7. Making and answering a call from your mobile phone  
Making and ending a mobile phone call  
When you make a call from your mobile phone, the call will transfer to your headset  
automatically (this is subject to phone settings, see your mobile phone’s User Manual to  
find out how to activate this feature).  
If your phone does not allow this feature, see your mobile phone’s User Manual on how to  
answer a call with a headset.  
To end a call, tap the headset Answer/End button, OR press End/No (or similar) on your  
mobile phone.  
Answering and ending an incoming mobile phone call  
To answer, tap the headset Answer/End button on your headset after the first ring OR,  
if the headset is placed in the base, simply remove it from the base.  
To end a call, tap the headset Answer/End button, OR press End/No (or similar) on your  
mobile phone, or place the headset in the base.  
IMPORTANT: If you answer a call on your mobile phone handset, some mobile phone models  
will not automatically transfer the call to your headset.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching from headset to mobile phone  
You can switch from your headset to your mobile phone during an active call. You might want to  
do this if, for example, your headset battery is running low.  
Use the menu on your mobile phone to switch from headset to mobile phone during an active  
call (see your mobile phone’s User Manual).  
Switching from mobile phone to headset  
It is possible to switch from your mobile phone to your headset during an active call.  
Use the menu on your mobile phone to switch from mobile phone to headset during an active  
call (see your mobile phone’s User Manual).  
Rejecting an incoming call  
Press the headset Answer/End button when the phone rings to reject an incoming call.  
Depending on your phone settings, the person who called will either be forwarded to your voice  
mail or hear a busy signal.  
Making a call with Voice Dial  
Tap the headset Answer/End button to enter Voice Dial mode. (Consult your mobile phone’s  
User Manual for more information about how to use this feature.)  
For best results, record the voice dialing tag through your headset.  
Redialing the last number  
Double tap the headset Answer/End button.  
Handling multiple calls  
Having one active call in headset  
Double tap on Answer/End button will put active call on hold and make a call to last dialled  
phone number.  
Having one active call while receiving one additional incoming call  
Tap on Answer/End button will end active call and answer incoming call.  
Double tap on Answer/End button will reject incoming call.  
Press Answer/End button for app. 1.5 sec to put active call on hold and answer incoming call.  
Having one active call plus one call on hold  
Tap on Answer/End button will end active call and retrieve call on hold.  
Press Answer/End button for app. 1.5 sec. to switch between the two calls.  
Please note that this behaviour might change depending on connected phone type.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Staying within range  
The sound in your headset will deteriorate if you move beyond range.1) Move back into range to  
restore sound quality. If you move too far from your mobile phone, the call might be ended or  
re-routed to your mobile phone from the headset, depending on what mobile phone model you  
are using. Please see your mobile phone’s User Manual for more information on this function.  
Remember!  
For optimal performance, wear the Jabra M5390 Multiuse headset and your mobile phone on the  
same side of your body or within line of sight. In general, you will get better performance when  
there are no obstructions between your headset and your mobile phone.  
8. Features  
Muting & unmuting  
8.1 Press Mute button on  
headset. A dual tone will be  
heard in the headset.  
8.1  
8.2  
8.2 To unmute, press Mute button  
again. A dual tone will be heard  
in the headset.  
1)  
Note: If answering a call with telephone handset, make sure the headset is placed in charge cradle.  
Otherwise, the call will be routed through the headset.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Low battery  
8.3  
8.3 Approx. 10 minutes before  
the headset runs out of battery,  
the visual indicator on headset will  
start to flash with a red light and  
a series of tones will be heard.  
If the battery runs out of power,  
visual indicator on headset will  
switch off automatically. Replace  
headset in charge cradle and  
continue the call using telephone  
handset. The headset contains a  
battery level indicator. By tapping  
the Vol. up/down button the visual  
indicator will flash quickly twice -  
green, yellow or red depending on  
the battery level.  
10 min  
Out of range  
8.4  
8.4 If you go out of range (app.  
70 m), all buttons except Answer/  
End button will stop working until  
back in range again.2) Please note  
that the majority of mobile phones  
only support 10 m.  
If headset is muted when going  
out of range, it will also be muted  
when going within range again.  
70m  
2)  
Important: If headset is out of range for more than 1 min., the link between base and headset will be  
terminated.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Headset switch  
8.5  
8.5 If the headset is absent,  
the headset switch must be  
activated in order to use the  
handset or, if the headset is in  
use with another Bluetooth®  
device, the headset switch must  
be activated in order to use the  
handset.  
Features:  
70 m headset/base -  
headset/dongle  
10 m for most mobile phones  
Range  
Talk time/  
standby time  
Up to 6 hours/up to 60 hours  
Transmission  
protocol  
Bluetooth®  
2.4 GHz  
Frequency band  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Reset/Pairing  
9.1 Under start-up, keep pressing  
the Answer/End button for three  
seconds. Alternatively, remove the  
snap-on cover and press the reset  
button on the headset for three  
seconds.  
9.1  
3
~
sec.  
Visual indicator on headset will  
light constant blue. 1)  
9.2 Then press reset button on  
base unit for 3 seconds. Visual  
indicator on base unit will light  
constant blue.  
9.2  
3
~
sec.  
9.3 Make sure headset and base  
are within 1 m of each other.  
When pairing is successful, both  
visual indicators will flash blue 5  
times, and the visual indicator on  
base unit will turn  
9.3  
to steady green.  
In order to clear the pairing list  
in the base, press and hold the  
reset button underneath the base  
for 5 seconds. In order to clear  
the pairing list in the headset,  
press and hold the reset button  
on the headset for 5 seconds.  
Note that after resetting, a new  
pairing sequence has to be  
initiated.  
1 m  
1)  
Note: The headset is already paired with the base unit from the factory. Pairing should only be necessary if  
a new headset has to work with an existing base unit (or vice versa).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Using the Jabra M5390 Multiuse headset with multiple Bluetooth®-enabled devices  
Your Jabra M5390 Multiuse headset can be paired with up to 8 devices. However, only two can be  
connected (paired with the headset, turned on and in range) with the headset at one time. This could  
be any two Bluetooth® devices (for example, a mobile phone and the Jabra M5390 Multiuse base,  
or the Jabra A335w Dongle and a mobile phone, or two mobile phones). Therefore, if the headset is  
in range of the Jabra M5390 Multiuse base or Jabra A335w Dongle, only one additional Bluetooth®  
device can be connected to the headset (paired with the headset, turned on and in range).  
The headset is per default paired with the base from the factory. This means that the headset will  
automatically connect to the base if in range and turned on. For the dongle pairing see the dongle  
manual on CD.  
It is also possible to have two Bluetooth®-enabled mobile phones connected to the Jabra M5390 Multiuse  
headset simultaneously. In this case, both base and dongle should be disconnected from the headset.  
11. Operating devices in multiuse scenarios  
From the button interface of the headset, it is possible to operate both devices in a multiuse  
scenario (two devices connected to the headset). Operations can be divided into handling for  
incoming and outgoing calls.  
If receiving an incoming call from either of the connected devices, this device will automatically  
be the device “in focus” and a tap will answer the call. A press will reject the call.  
If wanting to place an outgoing call activated from the headset, the user manually has to place  
one of the devices “in focus. Placing a device “in focus” means that all button presses made on  
the headset will be sent to the given device. For example, if a Voice Dial is to be activated on  
the second connected device, the user must first make sure that the given device is “in focus.  
After that, simply tap the button to activate a Voice Dial command.  
In order to switch focus between the two connected devices, the Answer/End button has to be  
pressed for app. 1.5 seconds.  
After having made a focus-swap action, different indicators will be used to inform the user  
which device is now “in focus”; If swapping focus to the Jabra A335w dongle, then the LED of  
the dongle will give 5 quick light-blue flashes. Also the speaker of the headset will say “Dongle  
in focus. If swapping focus to the Jabra M5390 base, the LED of the base will give 5 quick  
light-blue flashes. Also the speaker of the headset will say “Base in focus. If swapping focus  
to a mobile phone the speaker of the headset will say “Mobile in focus.  
Please note that this only applies to multiuse scenarios. If the headset is only connected to one  
device, then this device will automatically be “in focus.  
Also note that the Last Number Redial command does not use the “in focus” concept. If double  
tapping the Answer/End button, the Last Number Redial command will automatically be sent to  
the connected device with the latest incoming call (when connected to the headset).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: When multiple Bluetooth-enabled devices are paired with the headset, the Voice Dial*  
function will work with the last device that was paired.  
12. Switching between base and Jabra A335w Dongle in a multiuse scenario  
A typical multiuse scenario is to have the headset connected to one mobile phone and either the  
base or the dongle. If wanting to switch between base and dongle, while maintaining the mobile  
phone connection, just press and hold the Volume up/down button for 4 seconds.  
13. Troubleshooting & FAQ  
Q: Nothing happens when I try to adjust the clear dial tone.  
A: Make sure the base is powered (visual indicator on base unit is steady green). Then establish  
a voice link between base and headset (visual indicators on base unit and headset are  
flashing green). Also ensure that the telephone is activated (handset is off the hook or  
“line” button is pressed).  
Q: I hear myself when I talk.  
A: Your transmit volume level (please refer to section 3.10) is probably too high.  
Turn down the transmit volume level (3->2, 2->1).  
Q: The sound in the headset is of poor quality or the person at the other end cannot hear me.  
A: Make sure that you have positioned the clear dial tone switch correctly. To do this, call  
someone to adjust the clear dial tone switch.  
Q: When I press the Answer/End button, the GN 1000 RHL lifts, but the call is not connected.  
A: Make sure that you are using the telephone’s handset port and not the headset port  
(if your telephone has one), when using a GN 1000 RHL for remote answering.  
Q: I have moved desk at work. Is it possible to put my headset on another base?  
A: Yes, this is possible. The headset only needs to be paired to the new base. Just follow the  
procedure as described in section 9 of this guide.  
Q: I cannot hear anything in my headset when using my mobile phone.  
A: - Increase the volume on the headset (or phone).  
- As the volume level needed might vary between your desk phone and mobile phone, it might  
be best to adjust the level on the phones.  
- Then use the headset volume level adjustments for general adjustments (but ensure that the  
headset is paired with the mobile phone).  
- Make sure that the phone is connected to the headset - if it does not connect either from  
the phone’s Bluetooth® menu or by tapping the Answer/End button, follow the pairing  
procedure (see section 4 “Pairing your headset with your mobile phone” in this guide).  
*If the mobile phone supports this feature.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Q: Can I use wideband with a mobile phone or a desk phone?  
A: No, the headset only supports wideband with the Jabra A335w Dongle. Please see the Jabra  
A335w Dongle manual on CD for wideband settings.  
Note: If your desk phone has a volume button, it might help to adjust it to optimize the sound quality in your  
headset.  
14. Maintenance, safety and disposal  
Maintenance  
The ear hook can be wiped with a dry or slightly damp cloth. The cords and base unit can be  
dry-dusted as required. Avoid getting moisture or liquids into any button sockets, receptors or  
other openings. Avoid exposing the product to rain.  
Children and product packaging  
The packaging, including plastic bags and wrapping parts, are not toys for children. The bags  
themselves or the small parts they contain may cause choking if ingested.  
Batteries and product disposal  
Do not expose the headset batteries to heat. Dispose of the product and/or batteries according to  
local standards and regulations.  
Need more help?  
For your country’s support details, see the European and Australasia Safety & Declaration or  
NorthAmerican Declaration & Warranty that came with your Jabra M5390 Multiuse.  
Charger  
Warning: Do not attempt to charge your Jabra headset with anything other than the AC adapter provided.  
The use of any other AC adapter may damage or destroy the headset and may invalidate any approval  
or warranty, and may be dangerous. For availability of approved accessories, please check with your  
dealer. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.  
Never use a charger that is damaged. Important: The “colour” indicator light will be on while charging  
and will turn off when charging is complete. The Jabra headset cannot be used while charging.  
Battery information  
Your device is powered by a rechargeable battery. The full performance of a new battery is achieved  
only after two or three complete charge and discharge cycles. The battery can be charged and  
discharged hundreds of times, but will eventually wear out. Recharge your battery only with the  
provided approved chargers designated for this device. Unplug the charger from the electrical  
plug and the device when not in use. Do not leave a fully charged battery connected to a charger,  
since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge  
over time. Leaving the device in hot or cold places, such as in a closed car in the summer or in  
winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the  
battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work  
temporarily, even when the battery is fully charged. Battery performance is particularly limited in  
temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries  
may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when  
possible. Do not dispose as household waste.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. Appendix – GN 1000 Remote Handset Lifter (RHL) (optional accessory)  
The GN 1000 Remote Handset  
Lifter (RHL) is an optional acces-  
sory that automatically lifts and  
lowers your telephone’s handset  
when making, answering or  
ending a call.  
Setting up  
15.1  
15.2  
15.3  
15.1 Attach RHL to telephone  
handset cradle. Connect RHL  
cord to AUX port on bottom of  
base unit.  
Making/answering a call  
15.2 Put on headset, or press  
Answer/End button if already  
wearing headset. The RHL will  
automatically lift telephone  
handset.  
Ending a call  
15.3 Press Answer/End button,  
or place headset in charge cradle.  
The RHL will automatically replace  
telephone handset, and the call  
will be terminated.  
Note: Out of range. If headset is out of range for more than 1 min., any on-going call will be terminated.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2008 Gn netcom a/S. all rights reserved. Jabra® is a registered  
trademark of Gn netcom a/S. all other trademarks included herein  
are the property of their respective owners. The Bluetooth® word  
mark and logos are owned by the Bluetooth SiG, inc. and any use  
of such marks by Gn netcom a/S is under license. (design and  
specifications subject to change without notice).  
Made in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kustom Stereo Amplifier Dual 35 DFX User Manual
Lennox International Inc Furnace G21 V SERIES User Manual
Lindy Projector 32699 User Manual
Linear TV Receiver 2031 User Manual
Lucent Technologies Answering Machine 101 1620 005 User Manual
Makita Lawn Mower UM40LDW User Manual
Marantz Projector VP 11S1 User Manual
Meade Telescope 8 LS 8 ACF User Manual
Metra Electronics Automobile Accessories 99 7899 User Manual
Microstar Computer Hardware G52 MA00514 User Manual