Leica Laser Level 812806 User Manual
Leica DISTOTM E7100i  
The original laser distance meter  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instrument Set-up  
Introduction  
EN  
Overview  
The safety instructions and the user manual should be read  
through carefully before the product is used for the first time.  
The person responsible for the product must ensure that all  
users understand these directions and adhere to them.  
Display  
The symbols used have the following meanings:  
ƽWARNING  
Indicates a potentially hazardous situation or an unintended use  
which, if not avoided, will result in death or serious injury.  
ƽCAUTION  
Indicates a potentially hazardous situation or an unintended use  
which, if not avoided, may result in minor injury and/or appreciable  
material, financial and environmental damage.  
On/Measure  
Area / Units  
Important paragraphs which must be adhered to in practice as  
i
they enable the product to be used in a technically correct and  
efficient manner.  
Bluetooth®  
Clear / Off  
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
     
Instrument Set-up  
Display  
EN  
Insert batteries  
To ensure a relia-  
ble use, do not  
use zinc-carbon  
batteries.  
Info  
i
Change batteries  
when battery  
Battery  
symbol is flashing.  
Area  
Units  
Bluetooth®  
-
+
+
-
Main line  
Attach / Remove clip  
click!  
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
     
Operations  
EN  
Switching ON/OFF  
Clear  
Message Codes  
ON  
OFF  
1x  
2x  
If the message "InFo" appears with a  
number, observe the instructions in  
"Message Codes" section.  
Example:  
Press ON button  
2 sec to start  
continuous laser  
mode.  
i
2 sec  
Device is turned  
OFF.  
Undo last action.  
Leave actual func-  
tion, go to default  
operation mode.  
Unit setting  
Switch between the  
following units:  
0.000 m  
0.00 ft  
2 sec  
0.0000 m 0‘00‘‘ 1/32  
0 in 1/32  
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
         
Measuring Functions  
EN  
Measuring single distance  
Target surfaces: Measuring errors  
can occur when measuring to  
colourless liquids, glass, styrofoam  
or permaeble surfaces or when  
aiming at high gloss surfaces.  
Against dark surfaces the  
1
2
3
i
measuring time increases.  
8.532  
m
Aim active laser at target.  
Permanent measuring  
The last value measured is dis-  
played.  
1
2
3
2 sec  
Stops permanent measuring.  
8.532  
m
Aim active laser at target.  
Area  
1
2
3
4
5
2
Aim laser at first  
target point.  
Aim laser at sec-  
ond target point.  
24.352  
m
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
       
Measuring Functions  
EN  
®
Bluetooth Smart  
2 sec  
Deactivate/Activate Bluetooth®  
Value from main-  
line is transferred  
2
I8.462  
m
App Mode: Use this mode to transfer the data using an App.  
Ready devices. All other Bluetooth® devices do not support the energy  
saving Bluetooth® Smart Module, which is integrated in the device.  
We provide no warranty for free DISTO™ software and offer no support  
for it. We accept no liability whatsoever arising from the use of the free  
software and we are not obliged to provide corrections nor to develop  
upgrades. A wide range of commercial software can be found on our  
homepage. Apps for Android® or iOS can be found in special internet  
shops.  
i
Bluetooth® Smart is always active when the device is switched on.  
Connect the device with your smart-phone, tablet, laptop,…  
Measurement values will be transferred automatically right after a meas-  
urement. To tranfer a result from the main line, press the Bluetooth® key.  
Bluetooth® switches off as soon as the laser distance meter is switched off.  
The efficient and innovative Bluetooth® Smart module (with the new  
Bluetooth® standard V4.0) works together with all Bluetooth® Smart  
For more details, see our homepage.  
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
 
Technical Data  
EN  
* applies for 100 % target reflectivity (white painted wall),  
low ambient light, 25 ºC  
** applies for 10 to 500 % target reflectivity, high ambient  
light, - 10 ºC to + 50 ºC  
*** Tolerances apply from 0.2 m to 5 m with a confidence  
level of 95%. The maximum tolerance may deteriorate to  
0.1 mm/m. At unfavorable conditions such as bright  
sunlight, targets with poor reflectivity, or high or low  
temperatures, the maximum tolerance may deteriorate to  
0.15 mm/m above 5m.  
General  
Functions  
Typical Measuring Tolerance* 1.5 mm / 0.06 in ***  
Maximum Measuring  
Tolerance**  
Range at Leica target plate  
GZM26  
Typical Range*  
Range at unfavourable  
condition ****  
Smallest unit displayed  
Distance measuring  
Permanent measuring  
Area  
yes  
yes  
yes  
yes  
yes  
yes  
3.0 mm / 0.12 in ***  
70 m / 230 ft  
Beep  
®
Bluetooth Smart  
0.2-60 m / 0.6-200 ft  
30 m / 98 ft  
Illuminated display  
0.1 mm / 1/32 in  
**** applies for 100 % target reflectivity, background illumi-  
nation of approximately 30'000 lux  
™
Power Range Technology  
yes  
Laser class  
Laser type  
2
635 nm, < 1 mW  
Ø laser point  
at distances  
6 /30 / 60 mm  
10 / 50 / 100 m  
Protection class  
IP54 (dust- and splash  
water protected)  
Autom. laser switch off  
Autom. power switch-off  
Bluetooth® Smart  
after 90 s  
after 180 s  
Bluetooth v4.0  
10 m  
Range of Bluetooth®  
Battery durability (2 x AAA) up to 5000 measure-  
ments  
Dimension (H x D x W)  
Weight (with batteries)  
120 x 37 x 23 mm  
4.72 x 1.46 x 0.91 in  
92 g / 3.25 oz  
Temperature range:  
- Storage  
-25 to 70 °C  
-13 to 158 °F  
-10 to 50 °C  
14 to 122 °F  
- Operation  
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
 
Message Codes  
Care  
Warranty  
EN  
If the message Error does not disappear  
after switching on the device repeatedly,  
contact the dealer.  
If the message InFo appears with a number,  
press the Clear button and observe the  
following instructions:  
• Clean the device with a damp, soft cloth.  
• Never immerse the device in water.  
• Never use aggressive cleaning agents or  
solvents.  
Lifetime Manufacturer's Warranty  
Warranty coverage for the entire usage time  
of the product according to Leica Geosys-  
tems International Limited Warranty. Free of  
charge repair or replacement for all products  
that suffer defects as a result of faults in mate-  
rials or manufacturing, for the entire life of  
the product.  
Disposal  
No.  
Cause  
Correction  
ƽCAUTION  
204  
Calculation error  
Perform measurement  
again.  
Flat batteries must not be disposed of with  
household waste. Care for the environment  
and take them to the collection points  
provided in accordance with national or local  
regulations.  
3 Years no Cost  
240  
252  
253  
254  
Data transfer error  
Temperature too high  
Temperature too low  
Repeat procedure.  
Let device cool down.  
Warm device up.  
Guaranteed service should the product  
become defective and require servicing  
under normal conditions of use, as described  
in the user manual, at no additional charge.  
Battery voltage too low Change batteries.  
for measurements  
The product must not be disposed with  
household waste.  
Dispose of the product appropriately  
in accordance with the national regu-  
lations in force in your country.  
Adhere to the national and country specific  
regulations.  
Product specific treatment and waste  
management can be downloaded from our  
homepage.  
255  
Received signal too  
weak, measuring time  
too long  
Change target surface  
(e.g. white paper).  
To receive the "3 years no cost" period, the  
product must be registered at www.leica-  
geosystems.com/registration within 8 weeks  
of the purchase date. If the product is not  
registered, a "2 years no cost" period applies.  
256  
257  
258  
260  
Received signal too high Change target surface  
(e.g. white paper).  
Too much background  
light  
Shadow target area.  
Measurement outside of Correct range.  
measuring range  
Laser beam interrupted Repeat measurement.  
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
       
Safety Instructions  
EN  
The person responsible for the instrument  
must ensure that all users understand these  
directions and adhere to them.  
Permitted use  
• Measuring distances  
Hazards in use  
ƽWARNING  
Prohibited use  
• Using the product without instruction  
• Using outside the stated limits  
• Deactivation of safety systems and  
removal of explanatory and hazard labels  
• Opening of the equipment by using tools  
(screwdrivers, etc.)  
Watch out for erroneous measurements if  
the instrument is defective or if it has been  
dropped or has been misused or modified.  
Carry out periodic test measurements,  
particularly after the instrument has been  
subject to abnormal use, and before, during  
and after important measurements.  
Symbols used  
The symbols used have the following mean-  
ings:  
ƽWARNING  
Indicates a potentially hazardous situation or  
an unintended use which, if not avoided, will  
result in death or serious injury.  
ƽCAUTION  
• Carrying out modification or conversion of  
the product  
Never attempt to repair the product your-  
self. In case of damage, contact a local dealer.  
ƽCAUTION  
Indicates a potentially hazardous situation or • Use of accessories from other manufac-  
an unintended use which, if not avoided, may  
result in minor injury and/or appreciable  
material, financial and environmental  
damage.  
turers without express approval  
• Deliberate dazzling of third parties; also in  
the dark  
ƽWARNING  
Changes or modifications not expressly  
approved by Leica Geosystems for compli-  
ance could void the user’s authority to  
operate the equipment.  
• Inadequate safeguards at the surveying site  
(e.g. when measuring on roads, construc-  
tion sites, etc.)  
• Deliberate or irresponsible behaviour on  
scaffolding, when using ladders, when  
measuring near machines which are  
running or near parts of machines or instal-  
lations which are unprotected  
Important paragraphs which must be  
i
adhered to in practice as they enable  
Limits of use  
the product to be used in a technically  
correct and efficient manner.  
Refer to section "Technical data".  
The device is designed for use in areas  
permanently habitable by humans. Do not  
use the product in explosion hazardous areas  
or in aggressive environments.  
i
• Aiming directly in the sun  
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
           
Safety Instructions  
EN  
• Increase the separation between the  
Areas of responsibility  
Responsibilities of the manufacturer  
of the original equipment:  
Leica Geosystems AG  
Heinrich-Wild-Strasse  
CH-9435 Heerbrugg  
Internet: www.disto.com  
The company above is responsible for  
supplying the product, including the User  
Manual in a completely safe condition.  
The company above is not responsible for  
third party accessories.  
Responsibilities of the person in  
charge of the instrument:  
• To understand the safety instructions on  
the product and the instructions in the  
User Manual.  
Electromagnetic Compatibility  
(EMC)  
equipment and receiver.  
• Connect the equipment into an outlet on a  
circuit different from that to which the  
receiver is connected.  
• Consult the dealer or an experienced  
radio/TV technician for help.  
This device complies with part 15 of the FCC  
Rules. Operation is subject to the following  
two conditions:  
• This device may not cause harmful interfer-  
ence, and  
• this device must accept any interference  
received, including interference that may  
cause undesired operation.  
This device complies with Industry Canada  
license-exempt RSS standard(s). Operation  
is subject to the following two conditions:  
ƽWARNING  
The device conforms to the most stringent  
requirements of the relevant standards and  
regulations.  
However, the possibility of causing interfer-  
ence in other devices cannot be totally  
excluded.  
FCC statement (applicable in  
U.S.)  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reason-  
able protection against harmful interference  
in a residential installation.This equipment  
generates, uses and can radiate radio  
frequency energy and, if not installed and  
used in accordance with the instructions,  
may cause harmful interference to radio  
communications.  
• This device may not cause interference and  
• To be familiar with local safety regulations  
relating to accident prevention.  
• Always prevent access to the product by  
unauthorised personnel.  
• this device must accept any interference,  
including interference that may cause  
undesired operation of the device.  
However, there is no guarantee that interfer-  
ence will not occur in a particular installation.  
If this equipment does cause harmful interfer-  
ence to radio or television reception, which  
can be determined by turning the equipment  
off and on, the user is encouraged to try to  
correct the interference by one or more of  
the following measures:  
• Reorient or relocate the receiving antenna.  
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
     
Safety Instructions  
EN  
Use of the product with Blue-  
tooth  
Laser classification  
Labelling  
®
Laser Radiation  
Do not stare into the beam  
Laser class 2  
ƽWARNING  
Electromagnetic radiation can cause distur-  
bances in other equipment, in installations  
(e.g. medical ones such as pacemakers or  
hearing aids) and in aircraft. It can also affect  
humans and animals.  
acc. IEC 60825-1:2007  
Maximum radiant power: <1mW  
Emitted wavelength: 620-690nm  
Beam divergence: 0.16 x 0.6 mrad  
Impulse duration: 0.2 x 10-9s - 0.8 x 10-9  
s
The device produces visible laser beams,  
which are emitted from the instrument:  
Precautions:  
It is a Class 2 laser product in accordance  
with:  
• IEC60825-1 : 2007 „Radiation safety of  
laser products“  
Athough this product conforms to the most  
stringent standards and regulations, the  
possibility of harm to people and animals  
cannot totally excluded.  
• Do not use the product near petrol  
stations, chemical plants, in areas with a  
potentially explosive atmosphere and  
where blasting takes place.  
• Do not use the product near medical  
equipment.  
Laser Class 2 products:  
Do not stare into the laser beam or direct it  
towards other people unnecessarily. Eye  
protection is normally afforded by aversion  
responses including the blink reflex.  
ƽWARNING  
• Do not use the product in airplanes.  
• Do not use the product near your body for  
extended periods.  
Looking directly into the beam with optical  
aids (e.g. binoculars, telescopes) can be  
hazardous.  
ƽCAUTION  
Looking into the laser beam may be  
hazardous to the eyes.  
Subject to change (drawings, descriptions  
and technical data) without prior notice.  
Leica DISTOTM E7100i 812795a  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
     
Leica Geosystems AG, Heerbrugg, Switzerland has been certified as being  
equipped with a quality system which meets the International Standards of  
Quality Management and Quality Systems (ISO standard 9001) and Environ-  
mental Management Systems (ISO standard 14001).  
Total Quality Management - Our commitment to total customer satisfaction.  
Ask your local Leica Geosystems agent for more information about our TQM  
program.  
Copyright Leica Geosystems AG, Heerbrugg,  
Switzerland 2014  
Original text (812795a EN)  
Pat. No.: WO 9427164, WO 9818019, WO 0244754, WO 0216964,  
US 5949531, EP 1195617, US 7030969, WO 03104748,  
EP2589980  
Leica Geosystems AG  
CH-9435 Heerbrugg  
(Switzerland)  
www.disto.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Outdoor Shower Z534686000 User Manual
LG Electronics Air Conditioner LM50 2004 E1 User Manual
LG Electronics Oven LMB0960 User Manual
Life Fitness Home Gym FZBE User Manual
LST Smoke Alarm ECO1005T User Manual
Magnavox Clock Radio AJ344017 User Manual
Magnavox CRT Television HD2717C User Manual
Makita Grinder GA7001L User Manual
Marantz Computer Monitor PD6120D User Manual
Mark Levinson Stereo Amplifier No 53 User Manual