Legacy Car Audio DVD Player LDVD52 User Manual

DVD Player  
Operating Instructions  
LDVD52  
Before attempting to connect,  
or operating this product.  
Please read the instructions completely  
NOTES Any change to the design and specifications will not be advised.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD features  
Table of content  
1. DVD features  
7
8
9
Functions of buttons in remote control _ _ _ _  
Technical terms _ _ _ _ _ _ _ _ _ _ _ _ _ _  
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _  
20  
24  
24  
25  
It provides this multi-media disc player high-resolution image  
with, high-quality sound and surround sound effect. The DVD  
player can play not only DVD discs of various versions, but  
also VCD, SUPER-VCD, DVCD, CD,MP3,etc.  
10 Specification _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
Features  
1. It is compatible to DVD, VCD, SUPER-VCD, DVCD,CD,  
MP3, etc.  
2. Multi language on screen menu.  
3. High quality image with over 500 lines horizontal  
pesolution.  
Other features  
1. Dts digital output, provides high-fidelity stereo interface.  
2. Multi-language support. DVD supports up to 32-  
language caption and 8-language dub.  
3. Multi-angle. The user can select different angle at their  
option to watch, e.g. closer angle, full view, etc.  
4. Multi-image ratio. multi-image ratio mode enables the  
product to match different types of TV screen.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of parts  
Names of parts  
2. Names of parts  
2.3 Remote control  
2.1 Front panel  
13  
14  
1
2
6
2
3
5
1.POWER  
ON/OFF  
2.DISK TRAY  
3.OPEN/CLOSE  
4.LCD DISPLAY  
5.PAUSE/PLAY  
6.PHONE  
3
15  
7.STOP  
16  
17  
4
5
8.AUDIO R  
9.AUDIO L  
10.VIDEO  
6
7
18  
19  
20  
21  
8
9
10  
8
9
4
1
7
22  
10  
11  
23  
24  
2.2 Rear panel  
12  
25  
26  
8
1
1.MENU PBC  
2.POWER  
3.NUMBER  
4.SUBTITLE  
5.DISPLAY  
6.AUDIO  
7.ANGLE  
8.SETUP  
9.ENTER/SELECT  
10.DIRECTION KEYS  
11.DVD/GAME(DVD/TV/ GAME)  
12.VOLUME  
13.TITLE  
14.EJECT  
15.CLEAR  
16.SLOW  
17.PROGRAM  
18. MUTE  
19.REPEAT  
20.ZOOM  
21.PLAY PAUSE  
22.STOP  
23.FORWARD  
24.BACKWARD  
25.NEXT  
1.COAXIAL  
2.S-VIDEO  
3.VIDEO  
4.AUDIO L  
5.AUDIO R  
6.REMOTE  
SENSOR INPUT  
7.POWER  
8.RF IN  
RF IN  
(FROM ANT)  
26.PREVIOUS  
2
3
4
5
6
7
NOTE:  
THE 8 (RF IN) TERMINAL USED ONLY DVD WITH TV  
TUNER MODEL.  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation before operation  
Names of parts  
3. Preparation before operation  
3.3 Connections  
3.1 Unpacking and check  
Check for the following Accessories:  
The video signal is output through s-video or video output  
terminal, while audio signal is output by mixing channel terminal,  
coaxial terminal, dts signal is only output through or coaxial  
terminal. There are many solutions to connect TV and this  
product, user can select one according to the condition of the  
apparatus to be connected. However, be aware to shut off all  
power prior connection.  
Remote control 1  
choke 1  
DVD+TV  
Hanger 2  
TV  
Screw  
S-VIDEO VIDEO  
L
R
-
Battery 2  
YELLOW  
WHITE  
RED  
Audio/Video cord  
Owner's manual 1  
Remote sensor  
S-video terminal  
Plug one end of S-video cable into S-VIDEO socket in back panel  
of the product, the other end into TV S-VIDEO socket, then  
connect audio cable to TV (notes:do not connect video cable) .  
See diagram blow.  
DVD player+TV  
3.2 Assembling batteries of remote control  
Open battery compartment , Insert two 7#A batteries, make sure  
to match "+" and "-" of the batteries to the marks in the battery  
compartment. While operating remote control, please point it to  
the frontal panel of the DVD player.  
TV  
S-VIDEO VIDEO  
L
R
WHITE  
RED  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation before operation  
Preparation before operation  
DVD+AC  
DVD+AMP  
Power connection drawing while operating in room  
Connect AC adapter to +12V input  
When you turn off the car's  
power supply by key (ACC),  
the unit will be turn off and  
can remember the latest  
picture. When you turn on  
the IGNITION SWITCH  
again and play DVD, the  
unit will play from the  
memorypoint.  
AMP  
S-VIDEO VIDEO  
L
R
When you turn off the car's  
power supply by key (ACC),  
and want to take away the  
disc, you can turn on the  
unit's power supply by push  
[POWER] on the unit or  
remote control, and take  
away disc, then turn off the  
unit's power supply. If you  
forget turning off the unit's  
power supply, the unit can  
turn off automatically after  
30second.  
ADAPTOR  
YELLOW  
-110V 60Hz  
WHITE  
RED  
UP ADAPTOR WIRE  
DVD+CHOKE  
DVD WITH TV TUNER + ANTENNA (THIS CONNECTED  
ONLY USE IN DVD WITH TV TUNER MODEL)  
Power connection for automotive application  
12V remote out  
It provides the power of DC  
12V/0.5A when power of  
theproductison. Ifyouturn  
off power of the product, it  
willhavenooutput.  
ANT  
RF IN  
(FROM ANT)  
+12V  
CHOKE  
+RED  
CAR DC12V  
-BLACK  
Note:  
It is recomended to connect  
tocarbattery.  
Ground  
YELLOW  
ACC(IGNITION SWITCH)  
REMOTE OUT  
BLUE  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operation  
Basic operation  
4. Basic operation  
playback, push [  
play  
]
again to resume  
If you have connected the product to TV,  
all power lines have been plugged into  
receptacles, and loaded the batteries  
into remote control, so you can play the  
player.  
Turn on TV power  
Mute (available to analog audio output  
Signalonly)  
If you have connected amplifier, you  
should also turn it on, and select proper  
amplifier mode according to the type of  
discs to be played.  
Push [MUTE] to silence the sound of the  
player, press it again to return to normal  
state.  
Play  
Stop playing EJECT  
1. Push [POWER] in the player.  
1. Push [EJECT]  
Control TV remote control to shift TV  
to proper video input mode (VIDEO IN).  
unload the disc until the tray is  
ejected. After stopping playing, unload  
the disc until the tray is ejected.  
2. Push open/close eject player or [  
EJECT] buttons on the remote control  
to the tray.  
2. Push [EJECT] to close the tray  
Attention:  
3. Press [POWER] to turn off the player.  
Load a disc in the tray, with label side  
upward (see following figure), place  
single disc in the tray,  
Whileplayingifyoufindthe  
picture is not shown in full  
screenorsomeparthiddenor  
black and white image  
occur,youneedtothesystem,  
please select right TV system  
(PAL or NTSC), Please refer  
to instructions of [SYSTEM]  
IN CHAPTER 6 or examples  
inchapter6.  
Then turn off power of all connected  
equipment.  
3. Push [  
] PLAY/PAUSE  
The use of REMOTE SENSOR  
The player will close the tray  
automatically and begin to read it, It can  
identify different disc format then  
display it on the screen of DVD frontal  
panel, afterwards if automatically plays  
disc, If directory or menu picture disply  
in the screen, you can push the  
direction buttons [UP], [DOWN],[LEFT]  
and [RIGHT] buttons in the remote  
control to move lighting band to desired  
track, You can directly push number  
buttons to select track.  
If you want to put the DVD player in  
where you can not see, please insert  
REMOTE SENSOR in the REMOTE  
SENSOR INPUT, and put REMOTE  
SENSOR on where you can see in  
automobile, you can control the DVD  
player so long as let REMOTE  
CONTROL toward REMOTE SENSOR.  
REMOTE  
SENSOR  
When the  
symbol  
shows in TV screen, it  
signifies invalid operation or  
y o u r o p e r a t i o n i s n o t  
acceptedbytheplayer.  
While playing push [  
] to pause the  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequent operation  
Frequent operation  
5. Frequent operation  
Play fast backward  
While playing you can push [FB] button to play fast backward.  
Four speed are available to play forward, press it once the speed  
grows by one shift, when the speed reaches maximum speed,  
press [FB] again to return to normal state.  
We will introduce some regular  
operations of different types of function,  
the user can perform one or more  
operations as you like, In addition  
c h a p t e r 7 d e t a i l s p u r p o s e s a n d  
operations of all buttons  
Slow play  
While playing push [SLOW] to play slowly at different speed. You  
can play slow forward or backward, three shift speed are  
available for either of them. Push [SLOW] once, press it once the  
speed decreases by one shift, finally it returns to normal state.  
Select part to be played with  
menu  
MENU PBC  
If DVD disc to be played has menu, when  
PBC. state is on you can display the  
menu by pushing [MENU/PBC] or  
[TITLE], whereon you select a popular  
part to play. you can operate following  
procedures  
Skip to next chapter/track  
While playing push [NEXT] button.  
1.Push [MENU/PBC]  
Skip to previous chapter/track  
The screen display menu picture, the  
content to be selected varies with  
different disc.  
While playing push [PREV] button.  
2.Push [UP], [DOWN], [LEFT], [RIGHT]  
Select track  
Move the lighting band to the desired  
item or Made by pushing these buttons  
There are more than one operation procedure available  
A.Push [NEXT] or [PREV] to skip to the next or the previous  
track and play.  
3. Push [ENTER] to confirm selecting  
the item  
ENTER  
! B.For those discs with track numbered directly push number  
buttons to enter the No. of desired track to play. If the moment  
This moment the screen may display a  
submenu. You can also push [UP],  
[DOWN]. [LEFT], [RIGHT] to confirm  
selecting the push [ENTER] to comfirm  
the selection  
the screen displays  
, so there may be three possible  
reasons:(1) the track in the disc is not numbered; (2) the  
number entered beyond the scope; (3) PBC is on (push [PBC] to  
shift PBC state);  
C.Select among the song track list (refer to the next chapter).  
Play fast forward  
While playing you can push [FF] button  
to play fast forward. Four speed are  
available to play forward, press it once  
the speed grows by one shift, when the  
speed reaches maximum speed, press  
[FF] again to return to normal state.  
Display the track list  
For DVD discs, when PBC is on, push [MENU] to display the track  
list, the moment firstly push [UP], [DOWN] to select a track then  
push [ENTER] to play,  
For non-DVD discs, when PBC is on, while playing push  
[RESUME] to display the track list, the moment you can directly  
enter No.to select.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequent operation  
Frequent operation  
You can push [MENU/PBC] to change PBC  
state.  
The player will play orderly as the user Defined.  
Attention:whether the above procedures  
work will be subject to the type of disc.  
Display playing time and state  
Push [DISPLAY] button, TV screen will display current play time  
state, i.e.playing time, remaining time, press [DISPLAY] each  
time, the screen will show a time alternatively (the time displayed  
in the frontal panel accordingly changes), the content to be  
displayed each time will subject to the type of the disc.  
Repeat play  
While playing you can push [REPEAT] to  
select different repeat content.  
1
For DVD discs.push [REPEAT] to repeat  
chapter push [REPEAT] again to repeat title,  
push [REPEAT] again to exit.  
Mp3 operation  
MP3 is recently introduced disc, which is recorded with MP3  
format audio program. This DVD player supports MP3 disc, you  
can operate following these procedures:  
2
For non-DVD discs, when PBC is off, push  
[REPEAT] to repeat the track content, push  
[REPEAT] again to repeat all disc, push  
[REPEAT] again to exit.  
Push [EJECT] to eject tray, load MP3 disc, push [EJECT] again,  
TV screen will display following pictures  
Select subtitle Language (subject the Type  
ofdisc)  
For DVD disc, you can push [SUBTITLE] to  
select the language of caption.e.g. English.  
Press it once, the screen will display  
available language alternatively.  
Program play (subjecttothetypeofDisc)  
When PBC is off, in the stopping state:  
1. Push [PROGRAM]  
The screen display following figure,  
programming operation is available.  
Program: P00:00  
Use Direction key to move the cursor and use  
Enter key or PLAY key to enter the corresponding  
directory or select the corresponding file for  
playing. The option list of play modes lists some  
play modes. When LEFT/RIGHT key is used to  
move the cursor to a certain option, UP/DOWN key  
may be used to select a play mode. After the  
selection is completed, LEFT/RIGHT key may be  
used again to move the cursor to the directory or  
file to be played. And then press PLAY key (if it is  
in the directory, it is probably required to press the  
key twice) to start playing the disc.  
2.Push number buttons to enter the number  
Of Chapter or track  
Example:of the user want to firstly play track  
5, then track 3,finally track 6, so you can enter  
5,3, 6 orderly. (You can push [CLEAR] button  
to escape the entered number).  
3. Push [PLAY]  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequent operation  
System setting  
There are two kinds of file disc play mode:1. No-menu play mode.2.  
6. System setting  
Menu play mode. The factory default play mode of this unit is no-menu  
play mode. Please refer to the description on [SETUP] setting menu for  
the information on the switching of play modes.  
Attention:  
While playing, you can  
Push [SETUP], the screen will display system setting menu, the  
moment you can push [UP], [DOWN] to move the high lighting  
band to the desired item, push [ENTER] to display sub-menu. In  
the sub-menu push [RIGHT] to enter inferior sub-menu. You can  
push [UP], [DOWN] to move the high lighting band in all menu  
pictures. Push [ENTER] your selection will be valid. Push [LEFT]  
to escape the sub-menu in the right of the screen. Any time push  
[SETUP] or [EXIT SETUP] you will escape system setting state.  
In the first play mode, after a disc is put into the player and the player  
reads the disc, the player will go into [STOP] state and display [STOP]  
on DVD display panel.  
At this time, you can press a numerical key to select a file and play the  
disc starting with the selected file or press [PLAY] key to play the disc  
starting with the first file of this disc. This file may be either an MP3 file  
or [MPEG] file. When an MP3 is being played, you can press [DISPLAY]  
key to view file play time.  
push[PREVIOUS]or[NEXT]  
to play the previous track or  
thenextone.  
While playing you can  
push [STOP] to back to the  
menupicture.  
Note:1.If you are not quite familiar with thisunitand press [PROG] key  
Or select programming function through the menu when the discs  
described above are played,error operations will be caused.  
2. If your disc contains files of multiple formats, press [STOP] key after  
the play of the disc is finished and display the picture that you can`t  
usage [UP]or[DOWN ]key controled the menu.But you may press  
Previous or Next key to view track numbers in the list on the right side or  
directly press a numerical key to select a track to play.  
The high lighting band  
indicates current item  
After a JPEG file disc is read out, you can press PLAY key to start  
playing.  
The explanation to the  
current item  
Following are some examples of frequent setting the user can  
setting other items following their instructions.  
Example 1:Set TV screen ratio mode  
1.Push [SETUP] to enable the screen display the system  
setting picture, make sure the high lighting band has been  
located in GENERAL SETUP push [ENTER], TV screen will  
display following picture.  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System setting  
System setting  
2.Push [RIGHT] to enter the sub-menu in the sub-menu in the  
right screen. If you want to set the screen to "WIDE", firstly push  
[DOWN] twice to move the high lighting band to "WIDE' item, then  
push [ENTER],  
once to move the high lighting band to "STEREO" item, then  
push [ENTER].  
3,Push [MAIN PAGE] to exit system setting page.  
3.Push [MAIN PAGE] to exit system setting.  
Notes:three screen ratio modes, i, e, 16:9 WIDE, 4:3 PS, 4:3 L are  
available for your selection to enable different discs to match TV.  
the relationship between the video of disc and screen ratio mode  
are as follows:  
Example 3: Coaxial output  
If the user use coaxial terminal to output audio signal, you need to  
set the audio output "SPDIF/RAW' or "SPDIF/PCM", you can  
operate following these procedures:  
Video of disc  
4:3  
normal  
4:3PS  
4:3LB  
16:9  
Push [SETUP] to enable TV screen display system setting menu  
picture, please firstly enter general setting sub-menu,then  
select the item "AUDIO OUTPUT" in the menu, then push  
[ENTER], TV screen will display:  
16:9  
16:9  
Example 2:Set sound mix output mode  
1. Push [SETUP] to enable TV screen display system setting  
menu picture, push [DOWN] to move the high lighting band to the  
item "SPEAKER SETUP", push [ENTER], TV screen will display  
2. Push [RIGHT] to enter the sub-menu in the right screen, If you  
2.Push [RIGHT] to enter the sub-menu in the right screen, push  
[DOWN] to move the high lighting band to the item "SPDIF/RAW"  
or "SPDIF/PCM",then push [ENTER].  
3.Push [MAIN PAGE] to exit system setting.  
Special indications: if you are not going to use coaxial output  
audio signal, you need to set audio output to "ANALOG' output, so  
there will be no audio signal to set audio output to "ANALOG"  
output, so there will be no audio signal to be output in the  
mixchannel.  
want to set the sound mode to "STEREO", firstly push [DOWN]  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System setting  
System setting  
Example 4: Set age control grade  
For original DVD disc, parents can prohibit the those content  
inadvisable to children to be played, you can operate following  
these procedures to set age control grade:  
1.Push [POWER]  
2.Push [SETUP] to enable TV screen display system setting  
menu picture, push [DOWN] till the high lighting band move to the  
item "PREFERENCE", push [ENTER], then push [DOWN] till the  
high lighting band move to the item "PARENTAL", TV screen will  
display:  
2. Push [RIGHT] to enter the sub-menu in the right of the screen. If  
you want to set the language of operation indication or menu  
display to English, you can push "UP" or "DOWN" to move the high  
lighting band to "English", then push [ENTER], the language of the  
menu in the screen will turn into English.  
3.Push [MAIN PAGE] to exit system setting.  
3. The submenu SMART NAV in PREFERENCES item is  
used to set whether there is a menu when an MP3, MPEG  
file disc or JPEG file disc is played.  
3. Push [RIGHT] to enter the sub-menu in the right of the screen, if  
you want to change the age control grade to 3, push [DOWN] till  
the high lighting band move to the item "3PG", the player will  
indicate you to enter password, if the ex-factory password has  
never been modifiied, you can push number buttons "4408" in the  
remote control.  
4.Push [SETUP] to exit system setting.  
Example 5: Set Operation indication or menu display  
language  
For other description of this menu, please refer to the User  
Manual provided at an earlier time.  
1.Push [SETUP] to enable TV screen display system setting  
picture, push [ENTER], push [DOWN] till the high lighting band  
move to the item "OSD LANG", TV screen will display:  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions of buttons in  
remote control  
Functions of buttons in  
remote control  
7. Functions of buttons in remote control  
when PBC is off, while playing you should firstly push [STOP]  
button, then [PBC] to open yet.  
This chapter will detail the functions and operation procedures of  
all buttons in the remote control, for users' instant reference. Most  
operation procedures can be referred to relevant content of  
chapter 4, 5.  
8.8 [  
](whetheritworksdependonthetypeofdisc)  
While playing DVD disc, push the button to skip to next chapter;  
while playing SVCD and other discs, push this button to skip to  
next track  
8. 1[  
]
When the DVD player is in stop, pause, slow play, fast forward,  
fast reverse state, you can push [  
Push [  
it will play.  
8.9 [ANGLE](whetheritworksdependonthetypeofdisc)  
] to resume normal playback.  
] again, the DVD player will be pause,push [ ] again,  
while playing DVD disc with multi-angle function, push [ANGLE]  
to play the video in different angles at your option. Push the button  
each time, the player will be shift to a scene in another angle.  
8. 2[TITLE](whetherifworksdependsonthetypeofdisc)  
8.10 [MUTE]  
Push [TITLE] to display the title menu included in DVD disc. In the  
menu picture, you can push [UP], [DOWN], [LEFT], [RIGHT] to  
move the cursors to define desired item, then push [ENTER] to  
select the part to be played (or the sub-menu, this moment you can  
also push [UP], [DOWN], [LEFT], [RIGHT] to move the cursors to  
define desired item, then [ENTER] to play).  
Push this button to silence the sound output through analog  
channel.  
8.11[  
]
Push this button to play fast forward silently, press it once, the disc  
forward at a new speed and finally return to normal playing state.  
8.3 [PROGRAM]  
8.12 [  
]
Whether it works depends on the type of disc, push [PROGRAM]  
to enable users to change the playing order.  
Push this button to play fast backward silently, press it once, the  
disc backward at a new speed and finally return to normal playing  
state.  
8.4 [EJECT]  
Push the button once,the tray will be ejected, press it again to  
close the tray. When you want to load or unload disc, you can use  
this button.  
8.13[SLOW]  
Push this button to play slow silently, it can be played slow forward  
or backward, press it once to shift a speed and finally return to  
normal playing state.  
8.5 [REPEAT]  
Push this button to repeat chapter, title & disc.  
8.6 [ZOOM]  
8.14 [DISPLAY]  
Push the button to display some data of time, e, g. the current  
playing time, remaining time, etc.  
While playing push this button to zoom out the image, push the  
button once to enlarge the image by two times, push it twice to  
enlarge it by four times, press it another time to resume normal  
playback.  
8.15 [  
]
While playing DVD disc, push the button to skip to previous  
chapter; while playing SVCD and other discs, push this button to  
skip to previous track.  
8.7 [MENU/PBC]  
While playing DVD, push this button to display the option menu  
included in the disc (whether it works depends on the type of the  
disc). Push this button to shift PBC state. For DVD/SVCD disc,  
8.16 [ENTER]  
Push the button to execute the entered or the selected item.  
20  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions of buttons in  
remote control  
Functions of buttons in  
remote control  
8.17 [UP], [DOWN], [LEFT], [RIGHT]  
8.25 [DVD/GAME]  
When the screen display the menu of DVD disc or system menu,  
the player is in waiting state, you can push these buttons to move  
the cursor then select the desired item.  
Push [DVD/GAME] again, the unit will turn to "GAME"state,you  
can watch other program or play game by LINE INPUT on front  
panel.  
8.18 NUMBER BUTTONS  
8.26 [VOL+, VOL-]  
[0], [1].... [9] number buttons are used to enter number, e.g. No. of  
track, DVD chapter No., time data, etc.  
Push VOL+ to increase volume, push VOL- to lower to volume.  
8.19 [10+]  
NOTE:DVD WITH TV TUNER MODEL,THE [DVD/GAME]  
KEY IS EXCHANGED BY [DVD/TV/GAME]  
When the No. of a track or a chapter is over 9, firstly push [10+]  
then push relevant number buttons. The button is used to enter the  
number in decade of the No., press it each time, the number in  
decade will increase by 1.  
1.Push [DVD/TV/GAME] one time,the unit will turn to ``TV``  
state,then push [SETUP],and choose AUTO SEARCH,push  
[RIGHT] of direction key,and choose ON by direction key.  
Then push [RIGHT].This time,the unit will search and  
remember TV proram automatically.  
8.20 [CLEAR]  
When entering the programmed No., push [CLEAR] to cancel the  
entered number.  
2.You can choose TV program by [UP] and [DOWN] of  
direction key.  
8.21 [SETUP]  
1
5
9
2
6
3
4
Push the button, the screen will display system setting picture, the  
user can select some relative constant parameters. The user also  
can set it as needed. Detailed operation procedures please refer  
to chapter six.  
3.You can choose TV program by number key.  
Fox example,if you want to choose 18 CH, please push [10+  
]then push[8].  
7
8
CLEAR  
0/10  
10+  
8.22 [  
]
4.You can tune finely by[LEFT]and [RIGHT]of direction key.  
While playing DVD, push the button once to pause playing, push it  
twice to completely stop playing. Whether this function works  
subject to the type of disc.  
5.Push [DVD/TV/GAME] again,the unit will turn to  
``INput``state,you can watch other program or play game by  
LINE INPUT on front panel.  
While playing VCD/SVCD and PBC being on,push [STOP], you  
can return menu.  
8.23 [SUBTITLE]  
Push this button to select caption indication language, e.g.  
English, etc. Press it once to change a caption Language.(This  
operation works only for the disc with multi subtitle encoded).  
8.24 [AUDIO]  
Push this key to select the language of sound on the disc, push it  
once to change to another language. (This operation works only  
for the disc with multi language audio).  
23  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical terms  
Specifications  
Check whether the disc is scratched or there is dirt whereof.  
8. Technical terms  
This player is controlled by micro computer,if any trouble occurs,  
please turn off the power, reopen it till 10 minutes later, when there  
is notrouble the moment, you can normally operate the player.  
TITLE:For DVD disc it is defined as a long complete segment of  
image or music or a movie. Each title has a number that makes it  
easy to search.  
Button does not work  
This may caused by unstable electricity current or other abnormal  
trouble, please turn off the power, reopen it till 10 minutes later.  
TRACK: The image or music of a VCD or CD. Each track has a  
number for search.  
CHAPTER:It is smaller than title among the units of a DVD, it is  
defined as a long complete segment of image or music or a movie.  
A title is made up of several chapters, and each chapter has a  
number for search.  
10. Specifications  
CAPTION:The literature in TV screen bottom, generally it is  
translation or dialogue, also recorded in the disc.  
Playable discs: DVD/SVCD/DVCD/VCD1.0,1.1,2.0(micro laser  
video/audio disc) CD - DA (common music laser  
CD), MP3 audio disc,CD-R,CD-RW  
ANGLE:For some DVD discs, they record pictures filmed from  
different angles, the user can watch a same picture from different  
angles at your option.  
Videoformat:  
MPEG1,MPEG2, PCM, DOLBY DIGITAL, DTS;  
Audio format: MPEG1,MPEG2,PCM, DOLBY DIGITAL,  
DTS;analog stereo,  
Signaloutput:  
video signal: NTSC or PAL  
video:1.0Vp-p  
9. Troubleshooting  
No sound  
audio: mix stereo 2Vp-p  
Check if the unit is connected securely with other systems  
including amplifier or TV;.  
Functionaloperation:  
please refer to chapter 7.  
Make sure you operate the TV or amplifier correctly.  
Make sure the system setting is correct.  
Disc can not be played  
Output interface: RCA output, high-resolution system (S-VIDEO)  
output,coaxial digital output  
Powervoltage: DC9.5-24v  
Powerconsumption:15W  
.
Make sure the disc has been properly in the tray.  
Check whether there is only disc in the tray.  
Make sure the disc is clean  
Frequencyresponse:DVD:20Hz-20KHz  
Audiosignal/noiseratio: 90dB  
Weight:2.2kg  
Notes:  
.Remote control does not work  
Any change to  
the design and  
specifications  
w i l l n o t b e  
advised.  
Remove barriers from the remote control. Replace the batteries  
with new ones.  
Productdimension:220x160x66(mm)  
Accessories: audio/video cable, remote control (with  
batteries),user's manual, video CABLE.  
Point the remote control at the remote control sensor of the unit.  
Check whether the batteries energy is sufficient.  
Twisting image  
24  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How To Deal With Disk  
How To Deal With Disk  
Attention  
Don't write on the labeled  
side.  
Don't use pickup cleaning  
p r e p a r a t i o n . p h e n y l ,  
c h e m i c a l s o l u t i o n ,  
dispersing solution, anti-  
static electricity solution or  
any other kind of solutions to  
cleandisk  
How to hold disk  
Don't touch the face carving information.  
When there are stains on the face of disk  
wipe genitally with a wet cloth and then with a dry one.  
Don't stick label or glue-  
based note on disk (Don't use  
disks with remaining glue or  
damagedglueylable)  
When a disk is brought from a cold environment to a hot one, there  
could be steam on the face of disk. wipe with a dry, soft, smooth  
cloth before using.  
D o n ' t u s e s c r a t c h i n g -  
preventingmaterialsorcover,  
unless it is assigned to use on  
thismachine.  
Don't put or store disk at  
following environments.  
straight under the sunshine.  
/at moist or dusty places at  
the exit of hot air or beside  
heatinginstallation.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lennox International Inc Heat Pump HPXa15 User Manual
LG Electronics Cell Phone Accessories LG511C User Manual
Lindy Switch 25032 User Manual
Loewe Flat Panel Television L 26 User Manual
LST Smoke Alarm EN 12094 1 User Manual
Lux Products Thermostat 3M 22 User Manual
Lux Products Thermostat 52126 User Manual
Mackie Network Card D8B v51 User Manual
Manitowoc Ice Ice Maker K00341 User Manual
McCulloch Lawn Mower 165H107RB BA165H107RBC User Manual