IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
LASKO PRODUCTS, INC.
1700 Meacham Boulevard
Fort Worth, Texas 76106
ASSEMBLY OF 12" and 16" OSCILLATING FANS
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
This Fan is for residential use only.
It is not intended to be used in commercial or industrial settings.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed
to reduce the risk of fire, electric shock and injury to persons, including the following:
1. Read all instructions before using Fan.
2. Make certain that the power source conforms to the electrical
requirements of the Fan.
3. Use this Fan only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electrical shock, or injury to persons.
4. To reduce the risk of personal injury and electric shock,
the Fan should not be played with or placed where small
children can reach it.
INJURY, DO NOT REMOVE, REPLACE, REPAIR OR
TAMPER WITH THE ORIGINALLY SUPPLIED PLUG. IF THE
FAN DOES NOT FUNCTION PROPERLY, IT MAY BE DUE
TO THE SAFETY DEVICE INCORPORATED IN THIS PLUG.
RETURN TO AN AUTHORIZED SERVICE CENTER OR
CALL 800-233-0268, MONDAY THRU FRIDAY, BETWEEN
8:00AM AND 5:00PM EST. IF THE PLUG WARNING LABEL
IS MISSING OR DAMAGED, CALL THE TOLL FREE
NUMBER FOR A REPLACEMENT LABEL.
5. Unplug power cord before installing, servicing, or moving the
Fan.
9. Where possible, avoid the use of extension cords. If they
must be used, minimize the risk of overheating by ensuring
that they are UL listed. Never use a single extension cord
to operate more than one Fan.
WARNING: DO NOT DEPEND UPON THE ON-OFF
SWITCH AS THE SOLE MEANS OF DISCONNECTING
POWER WHEN INSTALLING OR SERVICING THE FAN.
ALWAYS UNPLUG THE POWER CORD.
6. This Fan must NOT be used in potentially dangerous locations
such as flammable, explosive, chemical-laden or wet atmo-
spheres.
7. DO NOT use Fan in or near a window. Rain may create an
electrical hazard.
8. Completely assemble Fan, according to instructions, before
connecting to power supply.
LASKO PRODUCTS, INC. LIMITED WARRANTY (NOT VALID IN MEXICO)
WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of
original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
WHAT LASKO WILL DO: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or
replace the whole product with the same or comparable model.
10.Do not operate any Fan with a damaged cord or plug or after
the Fan malfunctions, has been dropped or damaged in any
manner.
11.Do not insert or allow fingers or foreign objects to enter any
ventilation or exhaust opening as it may cause an electric
shock or fire, or damage the Fan. Do not block or tamper
with the Fan in any manner while it is in operation.
12.Always place the Fan on a stable, flat, level surface when
operating, to avoid the chance of the Fan overturning. Locate
the Power Cord so the Fan or other objects are not resting
on it. Do not run Power Cord under carpeting. Do not cover
Power Cord with throw rugs, runners, or the like. Arrange
Power Cord away from room traffic and where it will not be
tripped over.
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of accident, improper
handling or operation, shipping damage, abuse, misuse, unauthorized repairs made or attempted. This warranty does not cover shipping costs for the
return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.
ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY),
LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS
THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY
INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACMENT OR REPAIR OF ANY
HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL LASKO’S
LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL
TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.
WARNING: THIS APPLIANCE HAS A POLARIZED
PLUG (ONE BLADE IS WIDER THAN THE OTHER). TO
REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS
INTENDED TO FIT IN A POLARIZED OUTLET ONLY ONE
WAY. MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT. IF THE PLUG DOES NOT FIT FULLY INTO
THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES
NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT
ATTEMPT TO DEFEAT THIS SAFETY FEATURE.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which
vary from state to state and province to province.
13.This Fan is not intended for use in wet or damp
locations. Never locate a Fan where it may fall into a
bathtub or other water container.
Proof of purchase is required before a warranty claim will be accepted.
14. Do not use Fan outdoors.
15. This Fan is not suitable for use in agricultural facilities
including areas where livestock, poultry or other animals
are confined. Please refer to National Electric Code (NEC)
Article 547-7 (2008), or applicable state or local codes or
CUSTOMER SERVICE:
Our Customer Service team is available to assist you with product and service questions, and replacement parts. They can be reached
Monday through Friday, 8am-5pm Eastern. Please have your model number available, as well as the type and style (located on the
underside of your product). Please do not return product to place of purchase.
WARNING: THIS PLUG IS A SAFETY DEVICE. TO
REDUCE THE RISK OF FIRE, SHOCK, AND PERSONAL
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380 (Please do not send product to this location)
SAVE THESE INSTRUCTIONS
Rev. F 10/09
2084537
Rev. F 10/09
2084537
8
1
Download from Www.Somanuals.com. All Manuals Search And Download.
REPLACEMENT PARTS LIST
ASSEMBLY
KEY 12" OSC
16" OSC
2011200M
2098061
2010359
2010059
2010380L
2096529I
2011013
2010710
2010661
02030066GL
02090040
2010119
02090060
07091657
2010263S
2010251
2010276
2090140
2060090
02090585
2010252S
02090051
2060071
02090033
02090521
02010110A
02010109A
2010533
2009224
02055087
2010415
02065458
02090038
2010343
2060012
DESCRIPTION
Rear Grill
1
2011212
2098060
2010359
2010058
2010380L
2096531I
2010008
2010710
2010661
02030062GL
02090040
2010119
02090060
07091657
2010263S
2010251
2010276
2090140
2060090
02090585
2010252S
02090051
2060071
02090033
02090521
02010110A
02010109A
2010533
2009224
02055087
2010415
02065457
02090038
2010343
2060012
5. To secure Blade, screw Spinner onto Shaft
Counter Clockwise until tight on Blade hub.
(Figure 5)
7. WithFanHeadtiltedbackandcentered,alignOrnamentof
Parts Bag*:
Front Grill so it is horizontal. Insert bottom of Front Grill
into Rear Grill. Tabs at the bottom of Rear Grill should be
between two wires of Front Grill. Snap Front Grill into the
Rear Grill beginning at the top and working down both
sides. (Figure 7)
11
2
3
Plastic Nut (Large)
Spinner
10
4
Ornament
16" Fan Spinner
5
Front Grill
6
Blade
7
Motor Cover (Front w/Threads)
Motor Cover (Rear)
Motor
9
8
12" Fan Spinner
9
8
10
11
12
13
Screw Motor Cover (1)
Oscillation Knob
#7 x .080 PPH Type B Screw (2)
Threaded Spindle
Neck Assembly **:
Neck Piece Bearing
Oscillation Link
Link Screw (2)
Snaps
7
Snaps
Figure 5
12
13
16
Ornament
Tab
Tab
6. Install Ornament into Metal Front Grill. Insert Tabs into
14
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
rectanglar Slots. Snap into place. (Figure 6)
Figure 7
15
17
18
Elevation Washer
Elevation Spring
Neck Piece
21
19
22
20
Neck Screw
25
27
Elevation Range Plate
Hex Nut
Tab
23
Slot
Ornament
Elevation Shaft
Side View
Figure 6
26
Small Adjustment Knob
Large Adjustment Knob
Stand
24
Knob
28
Switch
36
Rubber Feet (4)
Stand Ornament
Screw #8 x 9/16 PPH Type 25
Bottom Plate (Plastic)
Bottom Plate (Metal)
35
30
29
34
32
33
34
35
2091145
7091854
2091145
7091854
Screw #8 x 1.5 Type A POH
Crimp Connect
31
36
37
02050013WB
2084537
02050013WB
2084537
Power Supply Cord w/Plug
Instruction Sheet (Not Shown)
* Parts 2-4 ordered as a Bagged Assembly
** Parts 14-21 ordered as an Assembly
1
6
2
3 (16")
4
5
3 (12")
2084537
3
2084537
Rev. F 10/09
6
Rev. F 10/09
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
MAINTENANCE
CONVERTING FROM TABLE FAN TO WALL MOUNTED FAN
OSCILLATION: Push down oscillation knob on motor hous-
ing to make fan head move from side to side. (Figures 8
and 9)
WARNING: ALWAYS UNPLUG CORD BEFORE CLEAN-
ING OR DISASSEMBLING.
(Grills and blade removed for clarity)
WARNING: DO NOT IMMERSE FAN IN WATER!
MOTOR
HOUSING
CLEANING: IMPORTANT! DO NOT immerse electrical
parts in water! Disassembled grills may be immersed
to be cleaned with a mild detergent and water. Wipe all
other parts with soft cloth moistened with water and mild
detergent only. DRY ALL PARTS COMPLETELY BEFORE
REASSEMBLING. After any maintenance or servicing,
completely reassemble unit as described in this instruction
manual before reconnecting to the power supply.
Down: Oscillate
Up: Stationary
NECK
LARGE
SMALL
ADJUSTMENT
KNOB
ADJUSTMENT
KNOB
CAUTION: Do not use gasoline, benzine, thinner, harsh
cleaners, etc. as they will damage the Fan. NEVER use
ALCOHOL OR SOLVENTS.
(For minor adjustments)
STAND
Figure 8
Figure 9
SPEED: Control fan speed with Speed Knob. (Figure 10)
SERVICING: All other servicing, with the exception of gen-
eral user maintenance, should be performed by an autho-
rized service representative. Call 1-800-233-0268, Monday
through Friday, between the hours of 8:00 a.m.and 5:00 p.m.
EST for the location of your nearest service center.
3 - High Speed
2 - Medium Speed
1 - Low Speed
1. UNPLUG FAN FROM OUTLET.
2. Remove the Small and Large Adjustment Knobs.
LUBRICATION: Motor is permanently lubricated.
1/8"
Speed
Knob
Figure 10
TILTING: This Fan is equipped with a multi-angle Fan Head
for Whole-Room Air Circulation. Follow the steps below to
properly adjust the "tilt angle" of your Fan.
3. Tilt Motor Housing all the way back.
4. Reinstall Small Adjustment Knob and tighten.
1. Place one hand just under the Fan Neck.
5. Reinstall Large Adjustment Knob.
2. Place your other hand on top of Fan.
6. Install two #8 x 1 1/4" Wood Screws (not provided), using Template below, leaving 1/8" between Screwheads and wall.
7. Mount Fan over Screws using Slotted Holes on Bottom Plate.
3. Gently push or pull the Fan Head until it is in the desired
position.
NOTE: TO ADJUST HEAD VERTICALLY - Loosen Large Adjustment Knob, set Motor Housing, retighten Knob.
CAUTION: FAN IS UNSTABLE IN THIS POSITION AND CANNOT BE USED AS A TABLE FAN.
TEMPLATE - DETACH TEMPLATE AND TURN 90° for use...
NOT SUPPLIED - Two #8x1-1/4" Wood Screws (Must be purchased separately)
NOTE: BE SURE THAT THE MOUNTING SCREWS ARE INSTALLED IN A WALL STUD FOR MAXIMUM SUPPORT.
7"
2084537
5
Rev. F 10/09
2084537
4
Rev. F 10/09
Download from Www.Somanuals.com. All Manuals Search And Download.
|