Laser DVR STB HDM2000 User Manual

STB-HDM2000  
User Manual  
Please read carefully before use  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InTroDucTIon  
Thank you for choosing this quality Set top box from Laser Co Australia.  
This device enables you to receive digital free-to-air channels.  
TaBle of conTenTS  
Front Panel and Rear Panel ................................................................................................................................4  
Remote Controller .....................................................................................................................................................5  
First time installation ..............................................................................................................................................6  
System Setup ................................................................................................................................................................6  
Video Setting ................................................................................................................................................................7  
Audio Setting ................................................................................................................................................................8  
Favourites ........................................................................................................................................................................9  
The Menus ......................................................................................................................................................................9  
Recording ...................................................................................................................................................................... 10  
Trouble Shooting..................................................................................................................................................... 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
STB-HDM2000 User Manual  
fronT panel anD rear panel  
Front Panel  
1. MUTE  
2. CH+  
3. CH-  
5. STANDBY INDICATOR  
6. REMOTE CONTROL SENSOR  
7. USB INPUT  
4. LED DISPLAY  
Rear Panel  
1. Antenna Input  
2. Spare Antenna Output  
3. Video Output  
5. YCbCr Output  
6. Coaxial  
7. Left/Right Audio Output  
8. Super Video Output  
4. HDMI Output  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
reMoTe conTroller  
1.  
2.  
3.  
4.  
STANDBY: Press to place the unit in  
standby mode.  
NUMBER KEYS:Used to select channel  
numbers or input numbers in menus.  
TEXT: Used to open teletext OSD display if  
teletext available in the broadcast stream.  
MENU: Display main menu on TV screen,  
press again to exit the menu.  
5/23. CH+/CH-: Program changing keys. Move  
cursor up or down in menu item.  
6/21. VOL-/ VOL+: To increase / decrease volume.  
Or to move cursor left or right in menu item.  
And to change date in the EPG environment.  
7.  
8.  
9.  
OK: Used to confirm a selection  
within a menu.  
EPG: Used to display information about the  
program being viewed and what’s on next.  
FAVOURITES: Used to access your  
favourite channels.  
10.  
11.  
REC: Press “REC” button to record to USB.  
PLAY/PAUSE: Used to play and pause  
multimedia files from USB.  
12.  
13.  
STOP: Stop playing USB Media.  
PREV/NEXT/REV/FWD: Play previous/next  
USB Media image REV/FWD speed up/down.  
RED/GREEN/YELLOW/BLUE: Use to  
navigate between pages in EPG mode.  
USB: Play USB media.  
14.  
15.  
16.  
HDMI: Switch the HDMI  
576i/576p/720p/1080i.  
TV/RADIO: Switch between Digital Radio  
and DVB-T modes .  
AUDIO: Change the Audio language or  
switch to AC3 mode (availability depends  
on the channel).  
17.  
18.  
19.  
SUB-T: Display subtitle options (availability  
depends on the channel).  
20.  
22.  
24.  
EXIT: Use this key to quit current menu.  
MUTE: Mutes the volume.  
INFO: Display information about the  
current channel.  
25.  
RETURN: Go back to the previously  
viewed channel.  
26/27. PAGE UP/PAGE DOWN:To navigate in the  
menu environment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
STB-HDM2000 User Manual  
fIrST TIMe InSTallaTIon  
Start channel installation.  
For first time use, the automatic installation message will appear on screen.  
a. Select the menu display language.  
b. Select the reception country.  
c. Then, select your time zone .  
d. Please keep the LCN (Logical Channel Number) option ON (activated), so that  
the channels can be classified in the correct order.  
e. Press the Start button to begin the channel search. The DVB-T channel search  
starts immediately and will only take a few minutes  
SySTeM SeTup  
Press [Menu] key to access:  
OSD Language  
Use this item to select the language of the setup menu and screen display.  
Country  
Australia is the correct default setting.  
LCN (Logical Channel Number)  
Used to classify DVB-T channels in the predefined order. In most of the countries,  
including Australia, this option must be enabled.  
Time Zone  
In this menu adjust the time zone to NSW/ACT+10:00, VIC+10:00, QLD+10:00,  
SA+9:30,WA+8:00, TAS+10:00,NT+9:30  
Parental Control  
Select Parental Control to set a block based on program ratings. Highlight Parental  
Control and press OK. A PIN CODE Dialogue box will be displayed, enter your PIN  
(default code is “0000”) and press OK. Once in the Parental Control sub-menu use  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
the up and down arrow keys to select the level of program rating to be blocked. All  
programs with this rating and above will require the PIN code to view the program.  
Change Password  
To change your password (PIN Code) follow these simple steps:  
1. Highlight Change password and press OK to activate the  
Change PIN dialogue box.  
2. Enter the current PIN (default is “0000”) and press OK.  
3. Enter your new PIN and press OK  
4. Enter your new PIN once again then press OK to verify the change.  
System Information  
Highlight System Information and press OK to view software and hardware tags.  
Press Ok to exit this environment. .  
Factory Reset  
Use this option if you encounter a problem after having changed some parameters.  
This option will reset the unit’s data to restore it to the out of factory value, thus  
deleting all channels. You will need to scan all Channels Afterwards.  
VIDeo SeTTIng  
TV System  
The default setting for this environment is PAL.  
HDMI Output  
To enjoy the enhanced audio and video quality that HDMI offers, you need an  
HD Ready television with HDMI connection. You then simply need to select the  
maximum resolution supported by your television in the menu:  
576i/480i  
576p/480p  
1280x720p (720p)  
1920x1080i (1080i)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
STB-HDM2000 User Manual  
Display problem in HDMI mode  
If you have selected a HDMI resolution which is not supported by your TV (for  
example, you have selected 1080i while your TV supports 720p resolution only),  
a black screen will appear. To solve this problem, press the HDMI button on the  
remote to change the HDMI resolution.  
Screen Ratio  
In this environment you can select the aspect ratio to match your TV, for a  
widescreen TV or panel version 16:9.  
auDIo SeTTIng  
Audio LR Mode  
LR MODE can switch left/Right/Stereo.  
Audio SPDIF  
Selecting the SPDIF setting allows the user to adjust the audio output on SPDIF  
Ports to work in harmony with audio equipment (e.g.receiver,speakers) conected  
to this unit.  
PCM Select this option when you are going to use stereo signals(2 channels).  
RAW If you select this option the player will use the DVB original audio track. Use  
this option when you want to use the Dolby Digital AC3 signals through the  
coaxial audio output.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
faVourITeS  
This function allows you to define a list of favourite channels. When you select  
the menu CHANNEL EDIT, a message will appear to ask you to select whether you  
want to create a favourite list for DVB-T channels, or for radio stations.  
a. Press the red button to select a favorite list 1,Press the red key a second time  
for favorite list 2,and a third Time favorite list 3.  
b. Press the UP and DOWN keys to select a channel and press OK to add this  
channel to the selected favorite list.A confirmation logo will be displayed next  
to the selected channel.  
c. Press the EXIT key to quit the menu.  
THe MenuS  
Main Menu  
System Setup  
Video Settings  
Audio Settings Installation  
Channel Edit  
Country  
Lcn  
TimeZone  
TV System  
HD Output  
Screen Ratio  
LR Mode  
SPDIF  
Manual Search  
Audio Search  
Upgrade STB  
OTA  
TV Channel  
Radio Channel  
Parental Control  
ChangePassword  
System Information  
Factory Reset  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
STB-HDM2000 User Manual  
recorDIng anD prograM reMInDer  
Record live TV  
Simply use the “REC” button while viewing the current channel.  
Schedule record / Reminder  
Highlight your chosen program and press “OK”. Confirm the schedule recording/  
reminder settings and press “OK” to confirm.  
Notes  
Conflicts may occur if 2 or more programs are scheduled for the same time.  
Recorded files are designed to play on this unit only.  
Recordings are made to a USB flash drive or external hard drive (less than  
500GB). Please plug your device in before powering the unit on. Restart the unit  
if there are any connection issues.  
THe MenuS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
TrouBle SHooTIng  
Symptom  
possible cause  
remedy  
Connect power cord  
properly into the power  
socket  
AC power cord  
disconnected  
LED on front panel does Incorrect connection of  
Connect two terminals  
correctly with RCA  
not display  
the video/audio output  
to TV input terminal  
Incorrect Connection of  
antenna cable  
Connect the antenna  
cable correctly  
Incorrect placement of  
antenna  
Adjust the direction of  
antenna  
Check the cable  
connections, TV and  
other equipment  
connected between the  
TV and the receiver or  
adjust the antenna  
No picture or sound  
No signal or weak signal  
Your TV mode is  
different from Set Top  
Box broadcasting mode  
Use AV mode  
Black and white screen  
or V-Hold  
Battery exhausted  
Change the batteries  
Switch off the light  
Fluorescent light  
interfering with the  
remote controller  
The remote controller is  
not working  
Unplug the power from  
the wall and plug it  
back in  
No Power  
Power Down  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
STB-HDM2000  
Digital Set Top Box  
For technical support please visit  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LG Electronics Computer Monitor W2252TG User Manual
LG Electronics Log Splitter LSVFSD LP User Manual
LG Electronics Refrigerator LMX21984 User Manual
Lincoln Electric Welder 215 XT User Manual
Linksys Cordless Telephone CIT310 User Manual
Makita Drill 6343DWAE User Manual
Maytag Dishwasher MDB8959AWB0 User Manual
Mellerware Bread Maker 26500 User Manual
Mellerware Fryer 27700 User Manual
Metabo Grinder STS 630 Set User Manual