Lanzar Car Audio Car Stereo System SDBT75NU User Manual

SDBT75NU  
OWNER’S MANUAL  
Mobile Video System  
• Vertical Adjustable And Horizontal Rotatable Panel  
• 7.0 Inch Touch Screen Monitor  
• Multi-subtitle/audio Languages Function  
• Multi-angle Function  
• Smart Mode Function  
• Parental Control  
• Remote Control  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Features.........................................................................................................2  
Use This Product Safely...............................................................................2  
Safety Information ........................................................................................4  
Disc Notes .....................................................................................................5  
Installation.....................................................................................................6  
The Player......................................................................................................9  
Electrical Connection .................................................................................11  
Remote Control...........................................................................................12  
Preparing the Remote Control..............................................................................14  
Loading a disc ......................................................................................................14  
Ejecting a disc ......................................................................................................14  
Operation.....................................................................................................15  
Basic Operation....................................................................................................15  
Disc (DVD, VCD, CD, MP3) Operation..................................................................19  
Radio Operation....................................................................................................24  
AV Operation.........................................................................................................25  
USB Play Operation..............................................................................................25  
Trouble Shooting.........................................................................................26  
Specification................................................................................................27  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION  
CAUTION:  
Region Management Information  
Region Management Information:  
This Mobile DVD Player is designed and  
manufactured to respond to the Region  
Management Information that is recorded  
on a DVD disc. If the Region number  
described on the DVD disc does not  
correspond to the Region number of this  
Mobile DVD Player, this Mobile DVD  
Player cannot play this disc.  
MOBILE DVD PLAYER IS A CLASS I  
LASER PRODUCT. HOWEVER THIS  
MOBILE DVD PLAYER USES A  
VISIBLE/INVISIBLE LASER BEAM  
WHICH COULD CAUSE HAZARDOUS  
RADIATION EXPOSURE IF DIRECTED.  
BE SURE TO OPERATE THE MOBILE  
DVD PLAYER CORRECTLY AS  
INSTRUCTED.  
USE OF CONTROLS OR  
ADJUSTMENTS OR PERFORMANCE  
OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
DO NOT OPEN COVERS AND - DO NOT  
REPAIR YOURSELF. REFER SERVICING  
TO QUALIFIED PERSONNEL.  
WARNING:  
• TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE  
THIS EQUIPMENT TO RAIN OR  
MOISTURE.  
• TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, AND ANNOYING  
INTERFERENCE, USE ONLY THE  
RECOMMENDED ACCESSORIES.  
• THIS DEVICE IS INTENDED FOR  
CONTINUOUS OPERATION.  
This product incorporates copyright  
protection technology that is protected  
by method claims of certain U.S. patents  
and other intellectual property rights  
owned by Macrovision Corporation and  
other rights owners. Use of this  
copyright protection technology must be  
authorized by Macrovision Corporation,  
and is intended for home and other  
limited viewing uses only unless  
otherwise authorized by Macrovision  
Corporation. Reverse engineering or  
disassembly is prohibited.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISC NOTES  
Disc formats supported by this player  
Label side up  
DVD  
12 cm disc  
(Single-sided disc only)  
Video CD  
Do not touch  
the underside  
of the disc  
12 cm disc  
CD  
12 cm disc  
MP3  
12 cm disc  
Do not bend  
Handling and Cleaning  
• Dirt, dust, scratches and warping disc  
will cause misoperation.  
• Do not place stickers or make  
scratches on discs.  
Wipe the disc from center  
toward the outside edge  
• Do not warp discs.  
Preparing New Discs with Rough  
Spots  
• A disc should always be kept in its  
case when not in use to prevent from  
damage.  
• Do not place discs in the following  
places:  
1. Direct sunlight  
2. Dirty, dusty and damp areas  
3. Near car heaters  
A new disc may have rough edges on its  
inside and outside edges. If a disc with  
rough edges is used, the proper setting  
will not be performed and the player will  
not play the disc. Therefore, remove the  
rough edges in advance by using a ball  
point pen or pencil as shown on the right.  
To remove the rough edges, press the  
side of the pen or pencil against the  
inside and outside edges of the disc.  
4. On the seats or dashboard  
Disc Cleaning  
Use a dry soft cloth to wipe the surface.  
If the disc is quite dirty, use a soft cloth  
slightly moistured with isopropyl (rubbing)  
alcohol. Never use solvents such as  
benzine, thinner or conventional record  
cleaners as they may mar the surface of  
the disc.  
Rough spots on  
outside edge  
Ball point pen  
or pencil  
Note:  
A disc may become somewhat scratched  
(although not enough to make it  
unusable) depending on the way it is  
handle and conditions in the usage  
environment.  
Note these scratches are not an  
indication of any problem with the player.  
Rough spots  
on inside edge  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Notes:  
DIN FRONT-MOUNT (Method A)  
Installation Opening  
This unit can be installed in any dashboard  
having an opening as show below:  
• Choose the mounting location where  
the unit will not interfere with the  
normal driving function of the driver.  
• Before finally installing the unit,  
connect the wiring temporarily and  
make sure it is all connected up  
properly and the unit and the system  
work properly.  
53 mm  
182 mm  
Installing the unit  
• Use only the parts included with the  
unit to ensure proper installation.  
The use of unauthorized parts can  
cause malfunctions.  
Be sure you test all connections first, and  
then follow these steps to install the unit.  
1. Make sure the ignition is turned off,  
and then disconnect the cable from  
the vehicle battery's negative (-)  
terminal.  
• Consult with your nearest dealer if  
installation requires the drilling of holes  
or other modifications of the vehicle.  
2. Disconnect the wire harness and the  
antenna.  
3. Lift the top of the outer trim ring then  
pull it out to remove it.  
• Install the unit where it does not get in  
the driver’s way and cannot injure the  
passenger if there is a sudden stop,  
like an emergency stop.  
4. The two supplied keys release tabs  
inside the unit's sleeve so you can  
remove it. Insert the keys as far as they  
will go (with the notches facing up) into  
the appropriate slots at the middle left  
and right sides of the unit. Then slide  
the sleeve off the back of the unit.  
• If installation angle exceeds 30˚ from  
horizontal, the unit might not give its  
optimum performance.  
Sleeve  
L Key  
Outer Trim Ring  
30˚  
• Avoid installing the unit where it would  
be subject to high temperature, such  
as from direct sunlight, or from hot air,  
from the heater, or where it would be  
subject to dust, dirt or excessive  
vibration.  
R Key  
5. Mount the sleeve by inserting the sleeve  
into the opening of the dashboard and  
bend open the tabs located around the  
sleeve with a screwdriver. Not all tabs  
will be able to make contact, so  
examine which ones will be most  
effective. Bending open the appropriate  
tabs behind the dashboard to secure  
the sleeve in place.  
DIN FRONT/REAR-MOUNT  
This unit can be properly installed either  
from “Front” (conventional DIN Front-  
mount) or “Rear” (DIN Rear-mount  
installation, utilizing threaded screw holes  
at the sides of the unit chassis).  
For details, refer to the following  
illustrated installation methods.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Dashboard  
9. Reconnect the cable to the vehicle  
battery's negative (-) terminal. Then  
replace the outer trim ring and install  
the unit's front panel. (see the steps  
of “using the detachable front panel”).  
Tabs  
Screwdriver  
Removing the unit  
1. Make sure the ignition is turned off,  
and then disconnect the cable from  
the vehicle battery's negative (-)  
terminal.  
Sleeve  
2. Remove the metal strap attached the  
back of the unit (if attached).  
3. Lift the top of the outer trim ring then  
pull it out to remove it.  
4. Insert both of the supplied keys into  
the slots at the middle left and right  
sides of the unit, then pull the unit out  
of the dashboard.  
6. Reconnect the wire harness and the  
antenna and be careful not to pinch  
any wires or cables.  
7. Slide the unit into the sleeve until it  
locks into place.  
8. To further secure the unit, use the  
supplied metal strap to secure the back  
of the unit in place. Use the supplied  
hardware (Hex Nut (M5mm) and Spring  
Washer) to attach one end of the strap  
to the mounting bolt on the back of  
the unit. If necessary, bend the metal  
strap to fit your vehicle's mounting  
area. Then use the supplied hardware  
(Tapping Screw (5x25mm) and Plain  
Washer) to attach the other end of  
metal strap to a solid metal part of the  
vehicle under the dashboard. This strap  
also helps ensure proper electrical  
grounding of the unit.  
Note to install the short threading  
terminal of the mounting bolt to the  
back of the unit and the other long  
threading terminal to the dashboard.  
Spring Washer  
Hex Nut  
Metal Strap  
Mounting Bolt  
Plain Washer  
Tapping Screw  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
When you install the front panel the unit  
will resume work automatically.  
DIN REAR-MOUNT (Method B)  
If your vehicle is a Nissan, Toyota, follow  
these mounting instructions.  
Use the screw holes marked T (Toyota),  
N (Nissan) located on both sides of the  
unit to fasten the unit to the factory radio  
mounting brackets supplied with your  
vehicle.  
Side view showing  
Screw Holes marked T, N  
Screw  
Factory Radio  
Mounting  
Bracket  
Screw  
Dashboard or  
Console  
To fasten the unit to the factory radio  
mounting brackets.  
1. Align the screw holes on the bracket  
with the screw holes on the unit, and  
then tighten the screws on each side.  
2. Fasten with the supplied truss screws  
(5x5mm) or flush surface screws  
(4x5mm), depending on the shape of  
the screw holes in the bracket.  
Note:  
(1) The outer trim ring, sleeve and the  
metal strap are not used for method B  
installation.  
(2) When the unit is on work, if you release  
the front panel, the unit will enter into the  
power off state automatically, and you  
can see the indicator LED flashing.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE PLAYER  
FRONT VIEW  
Closed Position  
1
2
3
4
5
6
21 20 19 18 17 16 15 14 13 12 11 10  
9
8
7
Open Position  
22  
23  
24  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE PLAYER  
1. BAND  
15. DSP  
2. AS/PS  
16.  
17.  
(Open/Close)  
(USB Interface)  
3. Disc Slot  
4. LCD Display  
5. LOC  
18. AV IN  
19. Reset Button  
20. Remote Sensor  
21. (BACK)  
6. MO/ST  
7.  
/
,
/
(Cursor Buttons)  
8. ENT  
22. 7 INCH TFT TOUCH  
SCREEN MONITOR  
23. SET+/-  
9.  
(Eject)  
10.  
(MENU)  
11. S(Smart MODE)  
12. /MUT  
24. SET/SRC  
13. VOL+/-  
14. MODE  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELECTRICAL CONNECTION  
REMOTE SENSOR  
CONNECTOR  
ANTENNA (BLACK)  
(BLACK)  
(GREY)  
CHOCK  
BOX  
R OUT (RED)  
(GREY)  
L OUT (WHITE)  
VIDEO OUT (YELLOW)  
L IN (WHITE)  
(GREY)  
(BLACK)  
(BLACK)  
(BLACK)  
(BROWN)  
(BROWN)  
(GREY)  
R IN (RED)  
VIDEO IN (YELLOW)  
PRE FROUT (RED)  
PRE FLOUT (WHITE)  
PRE RROUT (RED)  
PRE RLOUT (WHITE)  
CONNECT TO GPS BOX  
(GREY)  
(ORANGE)  
(GREEN)  
COAXIAL (ORANGE)  
Ground (Black)  
ACC (RED)  
SUBWOOFER (WHITE)  
Power Antenna (Blue)  
+12V Constant Power Supply (Yellow)  
4-speaker System  
(Green/Black)  
(Green)  
(White/Black)  
(White)  
(Gray/Black)  
(Gray)  
Rear Left  
Speaker  
Front Left  
Speaker  
Front Right  
Speaker  
(Violet/Black)  
(Violet)  
Rear Right  
Speaker  
TELEPHONE MUTE (ORANGE)  
BRAKE (PINK)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
LOCATION AND FUNCTION OF KEYS  
1
2
7
21  
34  
33  
29  
22  
19  
16  
17  
3
20  
18  
11  
12  
14  
13  
36  
4
8
15  
9
31  
30  
24  
26  
35  
23  
28  
5
32  
27  
10  
6
25  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
1.  
Press POWER to turn the unit ON or OFF.  
2.  
Press to eject the disc.  
3. EQ  
4. SUBT/BACK  
Press it to select desired audio equalization.  
Changing of the SUBTITLE language on multi-subtitle language DVD  
disc. In menu operation on the screen press it to return to the previous menu.  
Changing of the view angle on multi-angle DVD disc.  
Display statistical disc information during playback in DVD mode.  
Press to change the input source.  
5. ANG  
6. DISP  
7. MODE  
8. SETUP  
9. PROG  
10. AUD  
Display the SETUP menu in DVD mode.  
Allows the track played in the order you programmed.  
Changing of the AUDIO soundtrack on multi-audio soundtrack DVD disc.  
Changing of the sound mode of the VCD/CD discs.  
Display the TITLE menu that is stored in DVD disc.  
In other mode, press DSP to display the current mode on or off.  
Display the main menu.  
11. TITLE(DSP)  
12. MENU  
13.  
/
,
/
In case of MENU mode,  
/
,
/
buttons served as cursor buttons  
to select item left/right, ahead/back.In FM mode,use  
frequency.  
/
to choose the  
14. OK  
Confirm the Track/Chapter selected with the numeric buttons or selected  
with the cursor buttons on screen.  
Changing for slow forward/reverse playback motion on DVD disc.  
Press to play the disc.  
15.  
16.  
17.  
/
/
/
Press  
In FM mode, use  
Press to skip to the next track & press  
In radio mode, press to select the preset station.  
to search forward rapidly &  
to search the frequency.  
to skip back one track.  
to search reverse rapidly.  
/
18.  
/
19.  
20.  
21. 0-9  
22. MO/ST  
Press it to stop playback.  
Press it to pause playback.  
Numeric buttons  
In radio mode press the button to set the reception between mono mode  
or stereo mode.  
No defining.  
Switch between PAL mode and NTSC mode.  
Press it to enter SMART MODE function.  
Allows the picture to be increased in size.  
Press VOL+ button to increase the volume level.  
Disc search button in DVD mode, cooperatively used with numeric buttons.  
No defining.  
Press it to play all tracks on CD in random order.  
In FM mode, press it to select between local and distant stations.  
If you press the RESUME button, you can press CLEAR button to clear  
the stop point.  
-/- -  
23. P/N  
24. S-M  
25. ZOOM  
26. VOL+  
27. GOTO  
AUTO  
28. RDM (SHF)  
29. LOC(CLEAR)  
30. VOL-  
31. RPT  
32. A-B  
Press VOL- button to decrease the volume level.  
Switch the Repeat mode of discs.  
A-B repeat allows a passage to be repeated continuously.  
In radio mode, press it to activate Automatic Memory Storing/Program  
Scanning function.  
In radio mode, press it to select desired band.  
Changing between PBC ON and PBC OFF on the VCD disc.  
In radio, DVD, AV1, AV2 mode, press to mute the sound.  
Switch it to select operation mode among, DVD and AUDIO.  
33. AS/PS  
34. BAND(PBC)  
35. MUTE  
36. DVD-AUDIO  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
Preparing the Remote Control  
Inserting the Batteries  
1. Open the battery compartment cover.  
2. Insert the new batteries. Make sure  
that the positive and negative  
terminals of the batteries are oriented  
as indicated.  
3. Close the cover  
Battery: One button cell lithium  
battery.  
Using the Remote Control  
Point the remote control towards the  
remote control signal receiver on the  
player front face.  
Operation angle: About ± 30 degree in  
each the direction of the front of the  
remote sensor.  
LOAD/EJECT A DISC  
Loading a Disc  
1. Turn the ignition on to the accessory  
position.  
2. Press the button (21).  
3. Insert the disc with printed side facing  
up into the disc slot (3).  
4. The player will start playback  
automatically.  
21  
3
9
Ejecting a Disc  
In any mode, press button (9) to eject  
the disc.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
wait for several seconds, the panel will  
slide out automatically.  
BASIC OPERATION  
Turning the player on/off  
Shortly press button on the front panel  
or on the remote control to turn the player  
on.  
Screen Ajustment (Angle/ Slide/  
Picture)  
1) Method A (Adjust the angle/ slide/  
picture):  
When the monitor stops moving, touch  
the screen you will see the following  
picture(for the different mode the picture  
has a little difference):  
When the unit is on, press and hold  
button on the front panel or shortly press  
button on the remote control will turn  
the unit off.  
(Note: Shortly press button on the front  
panel will return the previous menu.)  
Open/Close the Monitor  
Press  
button on the front panel the  
monitor will draw out automatically.  
Touch the SCR icon on the screen or  
press SET/SRC button on the front panel,  
the following picture will appear:  
Press this button  
to draws out the monitor  
When the monitor draws out to a certain  
location, it will turn upward automatically  
and stop at vertical position.  
Tap  
/
icon to adjust the monitor angel  
upward/downward in small steps or draw  
the panel in/out to get a desired viewing  
position.  
Return the monitor to the central viewing  
position, then press button on the front  
panel .  
the monitor will turn downward  
automatically.  
Tap the PICTURE icon on the screen,  
touch  
/
to adjust the picture among  
Bright /contrast /Color /Tint. Or use  
/
icon to adjust the picture continuously.  
When the monitor turns downward to a  
certain angle, it will draw in.  
Shortly press SET/SRC on the front panel  
to select Angle or Slide items. Then use  
+/-buttons on the front panel to turn the  
monitor angel upward/downward in small  
steps or draw the panel in/out to get a  
desired viewing position.  
And you can rotate the monitor left and right  
from the central viewing position at a  
certain angle range manually.  
Note: The panel has automatic protection  
function. If the panel was hit by suddenly,  
it would be pushed into the unit. Please  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Note:  
7 Inch TFT Monitor Display  
1. Don’t rotate the monitor forcibly to  
avoid mechanical damage.  
When the monitor stretches out, the 7  
inch TFT Monitor display can show the  
current state of the unit.  
2. When the front panel is on the outside  
position (Slide item select the right  
dot.), you can adjust the angle of the  
panel. Pushing the front panel into the  
slot, the front panel will be drawn out  
after several seconds.  
Volume Level Adjustment  
Press VOL+/- buttons on the remote  
control or +/- icon on the right side of  
the screen to increase or decrease the  
volume level.  
Shortly press MUT on the front panel  
or MUTE on the remote control or tap  
the  
icon on the right side of the  
screen will mute the sound. Shortly  
press MUT or MUTE or tap  
icon  
again the sound will resume.  
Note: Under the label (printed “Take out  
screw before turn TFT”), there is a screw  
on the back of the unit, before you turn  
the TFT monitor, please take it out.  
Note: if there is no operation of the  
volume bar, the volume bar will  
disappear automatically. Tap the right  
place of the scree, it will appear.  
screw  
Reset  
Press  
on the front panel to release  
the front panel you will see the Reset  
button (See THE PLAYER picture  
above.) It must be activated with either  
a ballpoint pen or thin metal object. The  
reset button is to be activated for the  
following reasons:  
Mode Selection  
1) Tap SRC icon on the touch screen, or  
press and hold SET/SRC button on the  
front panel for several seconds,  
SOURCE picture will appear:  
- Initial installation of the unit when all  
wiring is completed.  
- All the function buttons do not operate.  
- Error symbol on the display.  
Setup  
Press MENU button on the remote  
control or tap any place on the screen  
main menu will appear. Then tap  
Tap the different icon on the screen to  
select the corresponding mode among:  
Radio, Media, AV1-IN, AV2-IN,  
BT(Optional), Navi(Optional).  
icon on the left of the screen will enter  
the SETUP interface like followed  
picture (note: Only in Media mode the  
“DVD SETUP” bar can be displayed):  
2) Press MODE button on the remote  
control to select among RADIO, MEDIA,  
AV1-IN,AV2-IN, BT(Optional),  
Navi(Optional).  
Remote Sensor  
There is a remote sensor on the front  
panel. You can point the remote control  
handset to the remote sensor on the  
front panel and press function keys on  
the remote control to control the unit.  
The unit is also connected to an external  
remote receiver (See the electrical  
connection diagram above), and the  
function is the same with the remote  
sensor on the front panel.  
Note:  
For all the operation on the screen, you  
can tap the corresponding icon on the  
screen or use  
on the remote control to select and  
confirm.  
/
,
/
and OK buttons  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Use  
/
to adjust the bass level between  
Tap  
tap  
will return to the previous menu,  
to turn off the current menu.  
-14dB~14dB.  
D: Subwoofer Selection (Only for the unit  
with subwoofer function.)  
1) AUDIO  
Tap AUDIO bar to enter the AUDIO menu.  
Use  
/
to select subwoofer on or off.  
E: Fader/Balance Adjustment  
Tap the Trable, Loud, Bass, Sub.W,  
Fad/Bal, EQ bar to adjust the different  
items. (Note: when the unit has not  
subwoofer function, tapping Sub.W bar  
on the screen doesn’t work.)  
A: Treble Adjustment  
Use R  
/
F to adjust the sound level of  
R to adjust sound level of the  
the front/rear speaker.  
Use L  
left/right speaker.  
F: EQ selection  
/
Use  
/
to adjust the treble level between  
-14dB~14dB.  
B: Loud Selection  
Tap the corresponding bar to select the  
deffrent sound mode : Flat, Rock, Classis,  
POP, Jazz, Custom.  
Note: when you select the deffrent sound  
mode, the corresponding value of BASS  
and TREBLE will be displayed on the  
screen.  
Use  
/
to select loud ON or OFF.  
2) SYSTEM  
Tap the SYSTEM bar to enter SYSTEM  
menu.  
C: Bass Adjustment  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
A: Expert menu  
reset the time to “00:00”.  
D: Wallpaper selection  
In expert menu, the following operation  
will be allowed:  
- Use  
- Use  
or off.  
/
/
to select Beep on or off.  
Use  
/
to select the wallpaper among:  
Blue, Black and Cyan.  
to turn the Clock display on  
3) DVD SETUP  
Note: With the expert menu on, when  
select clock on, the current time will be  
displayed on the up right of the screen,  
and you can see the time is changing.  
When exit the expert menu the clock  
will be displayed on the up right of the  
screen.  
When select clock off, the current clock  
will be stopped, when you exit the  
expert menu, the clock display will be  
turned off.  
Please refer to the DISC (DVD, VCD, CD,  
MP3) OPERATION part in this instruction  
manual.  
4) DEFAULT  
Tap the DEFAULT bar on the SETUP menu,  
you will be asked “Are you sure to load  
factory default setting?”, if you want to  
select default setting, tap ENTER bar on  
the screen or press OK  
button on the remote control to confirm,  
and “Load factory ok ! ” will appear on  
the screen.  
- Use  
/
to turn the Zone on or off.  
(only in radio mode, you can change  
Zone to ON.)  
Note (FOR THE UNIT WITH TEL-  
MUTE AND BRAKE FUNCTION)  
1) When there is an incoming call, the unit  
will be in mute state, and “TEL MUTE”  
appears on the screen display.  
- Use  
/
to select the mode of time  
between 12H/24H per day.  
B: Dual Zone  
2) If the brake wire isn’t connected to the  
ground (when driving, in BRAKE OFF),  
the picture will not be shown on the  
screen in DVD/AV mode for safety  
purpose. Only the audio will be heard.  
Smart Mode Operation  
Shortly press S-M button on the remote  
control or S (Smart MODE) button on the  
front panel to enter Smart Mode.  
1) When the current mode is TUNER,BT  
press S-M or S to enter smart mode,  
the front zone mode is TUNER, the rear  
zone mode can be switched among  
MEDIA, AV1 IN and AV2 IN. In this time,  
the front speaker’s audio is RADIO, the  
rear speaker’s audio will be muted. And  
AV OUT is DVD, AV1 IN or AV2 IN.  
2) (Only for the unit with navigation  
function.)  
For the front speaker, use  
corresponding items.  
/
to select  
How to operate dual zone, please refer  
to the following Smart Mode Operation  
section.  
C: Clock adjustment  
When the current mode is NAVI, Press  
S-M or S to enter smart mode, the front  
zone mode is NAVI, the rear zone mode  
can be switched between TUNER and  
DVD. In this time, if there is no  
Using  
/
to select the hour and minute.  
Then using  
/
to change the value of  
the hour and minute.  
Note: Tap the Reset bar on the screen will  
navigation sound, the front/rear  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
speaker’s audio is RADIO or DVD. When  
the speaker’s sound is RADIO, AV OUT  
is no output. When the speaker’s sound  
is DVD, AV OUT is DVD. If there comes  
navigation sound, the current front  
speaker’s audio will be switched to  
navigation sound, the rear speaker’s  
audio is RADIO or DVD. When the  
speaker’s sound is RADIO, AV OUT is  
no output. When the speaker’s sound  
is DVD, AV OUT is DVD.  
Slow Motion Playback (For DVD Only)  
on the remote control during  
Press  
/
play. Each time the button is pressed, the  
speed of slow forward / reverse changes  
according to the disc as follows.  
DVD:  
Normal Playback  
SF1/2  
SF1/6  
SF1/3  
SF1/5  
SF1/4  
SF1/7  
In slow motion state, press on the  
remote control to recover normal playback.  
Skipping Track  
DISC (DVD, VCD, CD, MP3) OPERATION  
In media mode, tap anywhere of the  
screen the DVD menu will be displayed  
on the screen:  
Press  
/
buttons on the remote  
control or on the screen or  
front panel during playback.  
/
on the  
Press  
press  
to skip to the next track, and  
to skip to the previous track.  
Note: For some VCD2.0 discs (PBC-  
playback control),  
be unavailable.  
/
buttons may  
DVD Video Menu Play  
When playing a DVD disc in the DVD  
player:  
Stopping Playback  
1) The disc will be played automatically  
and stop at menu picture.  
Shortly press button on the remote  
control or on the screen one time to pre-  
stop the unit playback. When / button  
on the front panel or on the screen or  
on the remote control is pressed, normal  
playback will continue.  
2) Use  
/
,
/
cursor buttons to move  
between the highlight bars in the menu.  
3) Press OK button on the remote control  
to confirm the selected item.  
Last Play Memory  
Press button twice to stop the playback  
and go back to the DVD LOGO.  
Pausing Play/Step Play  
Pressing / on the front panel or on the  
remote control or on the screen during  
playback will stop playback temporarily.  
1) During disc playback, if you hold  
power on the DVD unit for several  
seconds or press power button on  
the remote control to turn off the unit  
and then press the power button on  
the DVD unit again to turn on the unit,  
the DVD unit will resume playing from  
the point that just interrupted.  
To return to normal playback, press  
again.  
/
If you play a DVD/VCD/SVCD, second  
press / on the front panel for several  
seconds to stop at the next picture (step  
function). If you play a CD/MP3/Picture  
CD, second press / on the front panel  
for several seconds is ineffective.  
2) During disc playback, if you press  
MODE button to switch to other mode,  
then return to DVD mode again, the unit  
will resume playing from the point that  
just interrupted.  
Repeat Play/Paragraph Repeat Play  
Repeat play: when you want to repeat  
playing the whole disc or a track or a  
chapter in the disc.  
1) Press RPT button repeatedly to select  
different repeat modes.  
2) For different kinds of discs, pressing  
RPT button has different effects.  
Rapid Forward/Rapid Reverse  
Press  
&
on the screen or on the  
remote control during playback.  
Each time the button is pressed, the speed  
of rapid forward /reverse changes  
according to the disc as follows.  
DVD/VCD/CD/MP3:  
For DVD:  
Normal Playback  
X2  
X4  
X8  
X20  
REP:[OFF]  
REP:[CHAPTER]  
REP:[TITLE]  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
For VCD/SVCD/CD/MP3/WMA:  
ON-SCREEN DISPLAY  
FUNCTION  
REP:[OFF]  
REP:[REP1]  
REP:[REPALL]  
Press the DSP button during playback to  
display the console information of the  
current disc on the screen.  
For DVD:  
Once you press DISP button you will  
see the information as the following  
order.  
Note: REPEAT feature does not support  
VCD2.0 (with PBC ON).  
Paragraph Repeat Play: when you want  
to repeating play a desired paragraph.  
A-B repeat allows a passage to be  
repeated continuously.  
1) Press A-B button first at the start of  
the required passage:  
DVD TT 1/1 CH 4/28 C 00:07:12  
1/1 ENG  
5.1CH  
3/4 FRE  
OFF  
DVD TT 1/1 CH 4/28 C -00:05:15  
DVD TT 1/1 CH 4/28 T 00:15:55  
DVD TT 1/1 CH 4/28 T -01:48:33  
REPEAT A-  
2) Press A-B button secondly at the end  
of the passage:  
REPEAT A-B  
1) Item: TT  
Function: Display the current title  
number and total title  
number.  
3) Then the unit will repeat playing the  
passage you just set from A to B.  
4) To revert to normal playback, press A-  
B button again.  
2) Item: CH  
A-B CANCLE  
Function: Display the current chapter  
number and total chapter  
number.  
Shuffle/Random Play  
Press RDM/SHF button on the remote  
control will play the tracks in shuffle  
order, and “SHUFFLE” will appear on  
the screen. Press this button again will  
exit shuffle play mode, and “SHUFFLE:  
[OFF]” will appear on the screen.  
Note: when playing a DVD disc, this  
button is an invalid key.  
3) Item:  
(This icon only displayed  
for several seconds, after  
several seconds it will  
disappeared.)  
Function: Display the played time of  
the current chapter.  
4) C-: Display the remaining time of the  
current chapter.  
5) T: Display the player time of time  
current title.  
6) T-: Display the remaining time of the  
current title.  
PBC Menu Playback of VCD/SVCD  
For some VCD or SVCD discs, there is  
a menu in order to select the desired  
contents. This menu is called PBC  
(Playback Control) menu.  
Press PBC button on the remote control  
to change between PBC ON and PBC  
OFF on the disc.  
In PBC ON mode, REPEAT, RANDOM,  
BOOKMARK, A-B, PROGRAM and  
GOTO functions are unavailable.  
7) C: Display the played time of the current  
chapter.  
1/1 ENG  
5.1CH  
3/4 FRE  
OFF  
8)  
Display the current disc’s LANGUAGE,  
AUDIO TYPE, SUBTITLE LANGUAGE  
and PLAY ANGLE.  
For VCD:  
CD TRK 4/16  
HDCD  
HDCD  
HDCD  
HDCD  
C 00:00:08  
C -00:03:31  
CD TRK 4/16  
CD TRK 4/16  
CD TRK 4/16  
T
00:13:21  
T -00:58:04  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
The meaning of the menu is the same  
with the DVD menu above.  
Notes:  
- The language number is different  
according to the disc.  
- Some discs only contain one  
soundtrack language.  
GOTO FUNCTION  
FOR DVD:  
Press GOTO button, the screen will display  
the following message:  
Multi-angle Function  
Press ANG during playback. The  
following information will be shown on  
the screen.  
Use the number keys to input the desired  
Title, Chapter or Time, then press OK key  
to confirm.  
[ 1/4 ]  
Each time the button is pressed, the  
angle changes in sequential order.  
Notes:  
FOR VCD (WITH PBC OFF)/CD:  
- The angle number is different  
according to the disc.  
You can input the Track and Time then  
press OK key to confirm.  
- The function only works for discs  
having scenes recorded at different  
angles.  
ZOOM FUNCTION  
Allows the picture to be increased in size.  
Press ZOOM button on the remote control  
to toggle among 2 scale, 3 scale and 4  
scale, 1/2 scale,1/3 scale, 1/4 scale.  
When the scale is 1/4 times, press ZOOM  
button again to cancel the zoom function.  
Program Play  
In program play mode, you can play the  
track in your desired sequence.  
To program play a disc, please follow  
the next instructions.  
ZOOM 2  
ZOOM 3  
ZOOM 4  
ZOOM 1/2  
For VCD and CD:  
1) In PBC OFF mode. Press PROG  
button on the remote control to enter  
program edit interface.  
ZOOM OFF  
ZOOM 1/4  
ZOOM 1/3  
During Zoom mode, press  
/
,
/
buttons to move pictures up, down, left,  
or right direction.  
Prog-  
SPECIAL FUNCTIONS FOR DVD  
Multi-subtitle Language Function  
Press SUBT during playback. The  
following information will be shown on  
the screen.  
1 [ ]  
2 [ ]  
3 [ ]  
4 [ ]  
5[ ]  
6[ ]  
7[ ]  
8[ ]  
9[ ]  
10[ ]  
11[ ]  
12[ ]  
13[ ]  
14[ ]  
15[ ]  
16[ ]  
: [1 CHINESE]  
Each time the button is pressed, the  
subtitle language changes in sequential  
order.  
Play  
Clear  
2) Use  
/
or  
/
cursor buttons to  
select the items you want to program.  
The items you selected will become  
highlight.  
Notes:  
- The language number is different  
according to the disc.  
- Some discs only contain one subtitle  
language.  
3) Input the sequence number you want  
to program by numeric buttons (0-9)  
on the remote control.  
4) Use cursor buttons to select PLAY  
character, and PROG will be  
Multi-audio Language Function  
Press AUD during playback. The following  
information will be shown on the screen.  
highlighted, press OK button on  
remote control or ENT button on the  
front panel to confirm. And the unit  
will play the tracks you programmed.  
5) If you want to clear the programe,  
select CLEAR character and press  
: [3 ENGLISH  
5.1CH]  
Each time the button is pressed, the  
audio soundtrack language changes on  
sequential order.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
OK will clear the information you have  
SYSTEM SETUP  
programmed.  
When you open the setup menu, you will  
see the system setup page at first, see  
below:  
For data disc including audio  
(MP3/WMA), movie(MPEG), picture  
(JPG) files:  
The operation is the same as VCD/CD  
operation.  
Press PROG button on the remote control  
the following media play window will be  
shown on the screen:  
SYSTEM SETUP  
TV SYSTEM  
SCREEN SAVER  
TV TYPE  
PASSWORD  
RATING  
DEFAULT  
Prog-  
T
C
T
C
T
C
T
C
1__:__ 5__:__  
9__:__ 13__:__  
EXIT SETUP  
2__:__ 6__:__ 10__:__ 14__:__  
3__:__ 7__:__ 11__:__ 15__:__  
4__:__ 8__:__ 12__:__ 16__:__  
1) TV SYSTEM: Change the TV mode  
among NTSC, PAL and AUTO.  
2) SCREEN SAVER: Change the SCREEN  
SAVER on or off.  
3) TV TYPE: Change the TV TYPE among  
4:3PS, 4:3LB and 16:9.  
4) PASSWORD: Change the PASSWORD  
lock or unlock, the default PASSWORD  
is “0000”.  
5) RATING: Change the parental RATING  
among 1KID SAFE, 2G, 3PG, 4PG13,  
5PG-R, 6R, 7NC-17, 8ADULT.  
6) DEFAULT: Restore the system setup to  
the default setup.  
Play  
Clear  
Note:  
When playing tracks you programmed,  
press PROG button to enter the  
program interface, press PROG for  
second time will exit the menu and the  
unit will resume to normal play. When  
you want to return to program play,  
press PROG to enter program interface  
and select PLAY then use OK button  
to confirm, it will begin program play.  
And “PROG PLAY” will appear on the  
screen.  
LANGUAGE SETUP  
• When you open the language setup  
menu, you will see the language setup  
page:  
DVD SETUP  
There are two method to enter the DVD  
SETUP menu:  
Method A: In DVD mode, when the disc  
is playing or in stop mode, press SETUP  
on the remote control to enter setup menu.  
Method B: in SETUP menu, tap the DVD  
SETUP bar to enter the menu.  
LANGUAGE SETUP  
OSD LANGUAGE  
AUDIO LANG  
SUBTITLE LANG  
MENU LANG  
When the cursor is on the topside, use  
/
buttons to move between the different  
pages.  
* Press button to move the cursor to  
the setup page below and then you can  
EXIT SETUP  
use  
/
buttons to move between the  
different setup options.  
* Press button to display the choice  
list for each setup option and then use  
/
buttons and OK button to change  
your selection.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
You can change the OSD LANGUAGE  
among: English, German, Spanish, French,  
Portuguese, Italian and Russian.  
ATTACHMENT: PARENTAL CONTROL  
DVD discs have a parental level assigned  
to the disc. The range of parental controls  
is from 1 to 8.  
The player can be set in a similar way. If  
the player’s parental level is set to 8 it will  
play all discs. If the player’s parental level  
is set below 8, only discs with a lower or  
equal parental level will play.  
For example if the player is set to 5, only  
discs with parental control ratings of 5,  
4, 3, 2, & 1 will play. To play a higher rated  
disc you must change the player’s rating  
to a higher number.  
For example, consider a disc that generally  
is suitable for most audiences, and is  
rated as level 2 for the most part. However  
in the middle there are also scenes rated  
at 5 & 7 (not suitable for children).  
Alternative scenes with lower rating are  
included.  
You can change the AUDIO/ SUBTITLE/  
MENU language among: English, French,  
Spanish, German, Italian, Portuguese,  
Russian. And you can select  
audio/subtitle/menu language off.  
AUDIO SETUP  
• When you open the AUDIO menu, you  
will see the following picture:  
AUDIO SETUP  
A U D I O O U T  
KEY  
EXIT S E T U P  
The player plays the highest rated scene  
that the parental setting allows.  
A section of the disc can have several  
different sequences that vary in parental  
control level. In the above example of a  
disc with parental control, the player will  
show a different section depending on  
the parental control level set in the player’s  
menu. In this way parents can control the  
content of films and there is no indication  
that any censorship has occurred.  
The meaning of the levels 1 to 8 varies  
depending upon the country and the type  
of content on the disc.  
The parental control levels are:  
Unlock  
1 KID SAFE  
2 G  
3 PG  
4 PG 13  
5 PG-R  
6 R  
7 NC-17  
1) AUDIO OUT: Change among SPDIF/  
OFF, SPDIF/RAW and SPDIF/PCM.  
2) KEY: Change among -4, -2, 0, +2, +4.  
FREQUENTLY ASKED QUESTIONS  
• When inserting a DVD disc, why it can’t  
be played, just showing “region error”?  
It is because that the DVD player and  
the discs all have the “REGION CODE”.  
If the region number described on the  
DVD disc does not correspond to the  
region number of this DVD player, the  
unit cannot play the disc.  
• When inserting a DVD disc, there is a  
window shown on the screen that  
requires entering 4 characters  
password, why?  
It is because that the current disc has  
“Parental Control” level, and the player’s  
parental level is set below the level of  
the disc, you should enter the correct  
password to play the disc normally.  
NOTE:  
8 ADULT  
For how to set the “Parental Control”  
level, please refer to “SYSTEM SETUP  
\RATING” in the following page.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
The stations might be FM1, FM2, FM3,  
MW band. The operation is as below:  
- Store in Memory Press and hold  
desired memory location button for  
several seconds. The current listening  
station will be stored into the number  
button.  
- Or tap “CH” character on the screen  
then press and hold M1~6 button  
bars on the screen will stored the  
current station to the location button.  
- Retrieve a Preset Station  
RADIO OPERATION  
Switching to radio mode  
Press MODE button on remote control  
to select radio mode or tap the Radio  
icon on the SOURCE menu on the  
screen.  
In radio mode, the following information  
will appear on the display.  
Press any one of the RADIO PRESET  
buttons (1~6) on remote control to  
retrieve a station which had been  
stored in the memory in advance the  
hosen number is shown on display.  
Selecting the frequency band  
Press BAND on remote control or tap  
BAND bar on the screen to select  
desired band. The reception band will  
change in the following order:  
For two wave bands:  
Automatic Memory Story & Program  
Scanning  
- Program scanning  
Shortly press AS/PS button on remote  
control or on the front panel to scan  
preset station. And it will hold at each  
station for about 5 seconds.  
FM1 FM2 FM3 AM  
- Automatic memory storing  
Press and hold AS/PS button on  
remote control for about several  
seconds or press AS/PS button on  
the front panel, the radio searches  
from the current frequency and checks  
the signal strength until one cycle  
search is finished. And then stations  
are stored into the preset number  
button in turn according to the  
strength of the stations.  
Selecting station  
During radio mode, shortly press  
button on the front panel or on the  
remote control or tap  
the screen to increase frequency, shortly  
press button on the front panel or on  
icon on  
the remote control or tap  
icon  
on the screen to decrease frequency  
by one step of channel spacing. Hold  
the button longer for fast tuning. The  
frequency is updated correspondingly  
on display.  
When auto search is finished, it will  
enter into preset scan mode  
automatically.  
Press and hold  
/
buttons on the  
Note: In FM mode press and hold 1-  
6 numeric buttons on the front panel  
or on the remote control fro about 2  
seconds, will store the current station  
to the current numeric key position.  
front panel, “Manual” will appear on the  
screen display, you can adjust the  
frequency manually. If there is no  
operation for about 5 seconds, “Manual”  
will disappear. The system will exit this  
mode.  
Mono/Stereo  
Press MO/ST button on remote control  
to select mono or stereo mode. You  
can sometimes improve reception of  
distant stations by selecting mono  
operation.  
Setting memory  
Press RADIO PRESET buttons (1~6)  
on remote control or press  
/
on the  
front panel or on the remote control to  
preset stations at radio mode. With this  
system, a total of 24 stations (for two  
wave band) or 30 stations (for three  
wave band) can be stored in the  
memory of six buttons.  
Local/Distant  
Press and LOC button on the remote  
control to select between local and  
distant stations.  
Local setting for reception of strong  
Station, and a distant setting  
forreception of weaker stations.  
Each band stores up to six preset  
stations.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
When search station in LOC mode, if  
there is no station available, it will switch  
to DIS mode and search station  
automatically. If there is no station  
available too it will stop searching and  
return to LOC mode.  
USB PLAY OPERATION  
On the front panel of the unit, there is an  
USB interface. An USB driver can be  
connected through this interface.  
3) When there is no disc in the disc slot,  
connect an USB driver to the USB  
interface, and change the mode to  
MEDIA mode, the unit will read the files  
stored in the USB device automatically.  
When reading an USB device, if insert  
a disc to disc slot, the unit will read the  
disc automatically.  
When search station in DIS mode, if  
there is no station available, it will stop  
searching in DIS mode.  
AV OPERATION  
Switching to AV mode  
There is a pair of AUDIO/VIDEO INPUT  
jacks on the front and back of the unit.  
When you connect an audio/video system  
through these jacks, press MODE button  
on the remote control or on the front panel  
to select AV mode.  
4) If there is a disc in the disc slot,  
connecting an USB driver to the USB  
interface, when changing the mode to  
MEDIA mode, the unit will play the disc.  
Press (stop) or (pause) button on  
the remote control or press and hold  
/MUT on the front panel to enter  
PRE-STOP, STOP or PAUSE mode, then  
press GOTO button to read the USB  
device.  
USB PLAY OPERATION (OPERATION)  
On the back of the unit, there is an USB  
socket. An USB driver can be connected  
through this interface.  
1) Connect a USB driver to the USB  
interface, the unit will read the files  
stored in the USB device automatically.  
2) When there is a disc in the disc slot,  
connecting a USB driver to the USB  
interface, the unit will play the disc.  
Press (stop) or (pause) button on  
* When reading the USB device, Press  
(stop) or (pause) button on the remote  
control or  
/MUT on the front panel  
to enter PRE-STOP, STOP or PAUSE  
mode, then press GOTO button will play  
the disc.  
* When reading the USB device,  
disconnect the USB device, the unit will  
play the disc automatically.  
• The main unit can only support the  
standard USB-memory disc which is  
approved by Microsoft.  
• USB MP3 player is not a standard which  
means different brand name or different  
models have their own standard. So  
our product cannot support every MP3  
player.  
the remote control or  
/MUT on the  
front panel to enter STOP or PAUSE  
mode, then press GOTO button to read  
the USB device.  
When in USB play mode, be sure not  
to remove the USB driver from the USB  
interface. When stop USB play, you  
can remove the USB drive, after remove  
USB driver from the unit, the unit will  
play the disc automatically.  
• When connecting an MP3 player and  
there has normal battery in the player  
(non rechargeable battery), you should  
remove the battery from the MP3 player  
then connect it to the USB interface.  
Otherwise, it may cause battery burst.  
• When in USB play mode, be sure not  
to remove the USB driver from the USB  
interface.  
3) In USB play mode, you can press  
MODE button on remote control to  
switch the mode to other mode.  
The main unit can only support the  
standard USB-memory disc which  
is approved by Microsoft.  
USB MP3 player is not a standard  
which means different brand name  
or different models have their own  
standard. So our product cannot  
support every MP3 player.  
When connecting an MP3 player and  
there has normal battery in the player  
(non rechargeable battery), you  
should remove the battery from the  
MP3 player then connect it to the  
USB interface. Otherwise, it may  
cause battery burst.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
If it appears that your DVD unit is faulty,  
first consult this checklist. It may be that  
something simple has been overlooked.  
• Check if the volume is minimum, and  
adjust the VOL+ to increase the volume  
level.  
Under no circumstances should you  
try to repair the player yourself, as this  
will invalidate the warranty. Only  
qualified service personnel can remove  
the cover or service this player.  
NO RETURN TO START-UP SCREEN  
WHEN DISC IS REMOVED  
• Press POWER to turn off the unit, then  
press it again to turn on the unit.  
• Press Reset button on the front of the  
DVD unit.  
NO POWER  
• Check if the on/off button on the front  
of the player is set to on.  
• Check if AC or DC power plug of the  
mains unit is properly connected.  
• Check if there is power at the AC or DC  
outlet.  
THE PLAYER DOES NOT RESPOND TO  
THE REMOTE CONTROL  
• Aim the remote control directly at the  
sensor on the front of the player.  
• Avoid all obstacles which may interfere  
with the signal path.  
NO PICTURE  
• Inspect or replace the remote control  
batteries.  
• Check if the mode it set to proper state,  
such as DVD mode, RADIO, TV, AV and  
RGB mode.  
NO AUDIO AT DIGITAL OUTPUT  
• Check the digital connections  
• Check the video connection.  
• Check the Digital Audio menu to make  
sure that the digital output is correctly  
set.  
• Check if the audio format of the selected  
audio language matches your receiver’s  
capabilities.  
DISTORTED PICTURE  
• Check the disc for fingerprints and clean  
with soft cloth, wiping from centre to  
edge.  
• Sometimes a small amount of picture  
distortion may appear. This is not a  
malfunction.  
BUTTONS DO NOT WORK  
Turn the player off and on with the power  
on/off button on the front of the player.  
• Press Reset button on the front of the  
DVD unit.  
THE PICTURE IS OVER DARK, OVER  
BRIGHT OR HAS NO COLOR  
Enter the picture setup menu (refer to the  
Picture mode Adjustment above) to adjust  
the corresponding item (BRIGHT,  
CONTRAST, COLOR or TINT) to proper  
value, then you can get an optimum  
picture effect.  
COMPLETELY DISTORTED PICTURE  
• The disc format is not according to the  
TV-set used (PAL/NTSC).  
DISC DOES NOT PLAY  
• Ensure the disc label is upwards.  
• Clean the disc.  
• Check if the disc is defective by trying  
another disc.  
NO SOUND  
• Check audio connections.  
• If using a HIFI amplifier, try another  
sound source.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Power Supply Requirements  
Maximum Output Power  
Current Drain  
: DC12 Volts, Negative Ground  
: 4 x 80 Watts  
: 15 Ampere (max.) (For Normal Power Version)  
RADIO  
FM  
Frequency Coverage  
Sensitivity (S/N = 30 dB)  
Image Rejection  
87.5 to 107.9 MHz  
4 μV  
> 45 dB  
> 25 dB  
Stereo Separation  
AM  
Frequency Coverage  
Sensitivity (S/N = 20 dB)  
Image Rejection  
530 to 1710 KHz  
36 dBu  
45 dB  
36 dBu  
45 dB  
DVD  
Signal System  
Discs Played  
: Compositive video 1.0Vp-p 75Ω  
: (1) DVD-VIDEO disc  
5” (12 cm) single-sided, single-layer  
5” (12 cm) single-sided, double-layer  
(2) Compact disc (CD-DA/CD-R/CD-RW/MP3)  
(3) (12 cm) VIDEO CD  
Monitor Screen Size  
Resolution  
: 7.0” TFT  
: 1440 x 234 dots  
Note:  
Specifications and design are subject to modification, without notice, due to  
improvements in technology.  
8800-0V7020-33  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KTM Motorcycle 3CF8403H0EN User Manual
Kyocera Cell Phone K325 User Manual
Land Pride Lawn Mower SF25 Series User Manual
Lindy Computer Drive 42980 User Manual
LOREX Technology Switch SHS 2SA User Manual
Lyngdorf Audio Projector TDAI 2200 User Manual
Magellan GPS Receiver 9400 LM User Manual
Magnavox VCR DV225MG9 User Manual
Makita Laminate Trimmer 3708 User Manual
Mamp;S Systems Speaker System WS5 User Manual