U S B
2 . 0
C O M P A N I O N
H A R D D R I V E
user manual
user manual
user manual
user manual
user manual
user manual
user manual
user manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Foreward
LaCie mini
COMPANION HARD DRIVE
Copyrights
Copyright © 2005 LaCie. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior
written consent of LaCie.
Trademarks
Apple, Mac mini, and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows 98, Windows 98
SE, Windows 2000, Windows Millennium Edition and Windows XP are registered trademarks of Microsoft Corporation.
Sony and iLink are registered trademarks of Sony Electronics. Other trademarks mentioned in this manual are the property of
their respective owners.
Changes
The material in this document is for information only and subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its accuracy, LaCie assumes no liability resulting from errors or
omissions in this document, or from the use of the information contained herein. LaCie reserves the right to make changes or
revisions in the product design or the product manual without reservation and without obligation to notify any person of such
revisions and changes.
FCC Statement:
Warning! Modifications not authorized by the manufacturer may void the user’s authority to operate this device.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
LaCie mini - USB 2.0
Tested To Comply
With FCC standards
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the
interference at his own expense.
FOR HOME OR OFFICE USE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Download from Www.Somanuals.com. All Manuals Search And Download.user manual | page 3
Foreword
LaCie mini
page 4
COMPANION HARD DRIVE
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canada Compliance Statement
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Manufacturer’s Declaration for CE Certification
We hereby certify that this device is in compliance with both the EMC Directive (89/336/EEC) and the Low Voltage Directive
(73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms:
Class B EN60950, EN55022, EN50082-1, EN61000-3-2
With reference to the following conditions:
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
Download from Www.Somanuals.com. All Manuals Search And Download.user manual | page 4
Precautions
LaCie mini
COMPANION HARD DRIVE
Health And Safety Precautions
Only qualified persons are authorized to carry out maintenance on this device.
• Read this User's Manual carefully, and follow the correct procedure when setting up the device.
• Do not open your hard drive or attempt to disassemble or modify it. Never insert any metallic object into the drive to avoid
any risk of electrical shock, fire, short-circuiting or dangerous emissions. Your hard drive contains no user-serviceable parts. If
it appears to be malfunctioning, have it inspected by a qualified LaCie Technical Support representative.
• Never expose your device to rain, or use it near water, or in damp or wet conditions. Never place objects containing
liquids on the drive, as they may spill into its openings. Doing so increases the risk of electrical shock, short-circuiting, fire or
personal injury.
General Use Precautions:
• Do not expose the hard drive to temperatures outside the range of 5° C to 35° C (41° F to 95° F) during operation. Doing
so may damage the drive or disfigure its casing. Avoid placing your drive near a source of heat or exposing it to sunlight
(even through a window). Inversely, placing your drive in an environment that is too cold or humid may damage the unit.
• Always unplug the hard drive from the electrical outlet if there is a risk of lightning or if it will be unused for an extended
period of time. Otherwise, there is an increased risk of electrical shock, short-circuiting or fire.
• Use only the power supply shipped with the device.
• Do not use the hard drive near other electrical appliances such as televisions, radios or speakers. Doing so may cause
interference which will adversely affect the operation of the other products.
• Do not place the drive near sources of magnetic interference, such as computer displays, televisions or speakers. Magnetic
interference can affect the operation and stability of your hard drive.
• Do not place heavy objects on top of the drive or use excessive force on it.
• Never use excessive force on your drive. If you detect a problem, consult the Troubleshooting section in this manual.
• Protect your hard drive from excessive exposure to dust during use or storage. Dust can build up inside the device,
increasing the risk of damage or malfunction.
• Never use benzene, paint thinners, detergent or other chemical products to clean the outside of the drive. Such products will
disfigure and discolor the casing. Instead, use a soft, dry cloth to wipe the device.
• Do not block the ventilation outlets on the top of the drive. These help to keep your drive cool during operation. Blocking the
ventilation outlets may cause damage to your drive and cause an increased risk of short-circuiting or fire. Always place mini
under Apple Mac Mini to allow for proper cooling for both the mini and the Mac Mini.
Warning! The drive's warranty may be void as a result of the failure to respect the precautions listed above.
Download from Www.Somanuals.com. All Manuals Search And Download.user manual | page 5
Unpacking Your LaCie Drive
LaCie mini
COMPANION HARD DRIVE
1. Unpacking Your LaCie Drive
Your LaCie mini is designed to upgrade the storage capacity of your Mac mini conveniently stacking under it. You can also
use your LaCie mini with other computers, using a variety of operating systems. Ideal for speed intensive applications, the
LaCie mini handles your demanding data needs. Secure and stable, the LaCie mini is an easy way to add storage space to
your computer without losing space on your desk.
1
3
LaCie mini
1
2
Power supply and adapter cable
2
Long and short Hi-speed USB 2.0
certified cable
3
4
C
O
M
P
A
N
I
O
N
H
A
R
D
D
R
I
V
E
4
LaCie Storage Utilities CD-ROM
User’s Manual
Higher
Windows® 2000/XP or Mac OS
For Mac OS Higher: Silverkeeper v1.1.2
X
&
X
&
•
1.1. Minimum System Requirements
System Requirements for USB 2.0:
• Windows 98 SE, Windows 2000, Windows Me and Windows XP
• Mac OS 9.x (Apple USB support 1.3.5 and greater) and Mac OS 10.1, 10.2, 10.3, and 10.4
Hardware Requirements for USB 2.0:
• Mac: G3 processor or greater
• Computer with USB 2.0 or 1.1 interface*
• Intel Pentium 233MHz-compatible processor or greater
• Minimum 32MB RAM
Tech Note: *To achieve USB 2.0 speeds, your drive must be connected to a USB 2.0 host port. If it is connected to a
USB 1.1 port, your drive will operate at USB 1.1 speeds. For more details, see 4.1. Advice for Optimizing USB 2.0
Connections.
Download from Www.Somanuals.com. All Manuals Search And Download.user manual | page 6
Unpacking Your LaCie Drive
LaCie mini
COMPANION HARD DRIVE
1.2 Stacking your LaCie mini
Your LaCie mini is designed to stack under another LaCie mini or your Apple Mac mini. To allow for proper cooling, always
stack your LaCie mini under your Mac Mini. DO NOT turn over your drive or place your Lacie mini on top of the Apple Mac
mini, as this will risk overheating.
Download from Www.Somanuals.com. All Manuals Search And Download.user manual | page 7
Getting Connected
LaCie mini
COMPANION HARD DRIVE
2. Getting Connected
Follow these steps to quickly get your LaCie mini powered on and connected to your computer. See the
following steps to get started!
2.1. Connect the Power Supply and Switch On the Drive
2.2. Connect the USB 2.0 Cable to Your LaCie Drive and to Your Computer
Once you’ve gotten the drive powered on and connected to your computer, move on to section 3. Using
Your LaCie Drive for important information on how to format and utilize your drive.
Mac OS 9.x Users!
Windows 98 SE and Windows Me Users!
Before following the next three steps, first install this important software to help you configure and manage your LaCie drive.
• Mac OS 9.x Users, see 3.1.1.
• Windows 98 SE and Windows Me Users, click see 3.1.2.
Download from Www.Somanuals.com. All Manuals Search And Download.user manual | page 8
Getting Connected
LaCie mini
COMPANION HARD DRIVE
Mac OS 9.x Users Only! Silverlining Pro Installation
Before connecting the power supply and USB 2.0 cable to your drive, you will need to install Silverlining Pro, which will help
you manage your drive. Follow the steps below to install the necessary drivers and software to configure your drive. Then
move on to the power supply and USB 2.0 cable installation steps.
1) Insert the LaCie Storage Utilities CD-ROM in your computer’s internal CD/DVD drive.
2) Open the CD icon and double-click on the Silverlining Software folder.
3) Click on the Silverlining Installer icon (Fig.2.1).
4) The Silverlining Utilities screen appears. Click on Continue.
5) The “Silverlining Read Me” screen appears. Read the following information and click
on Continue.
6) The “License Agreement” screen appears. Click on Agree.
7) The “Installation” screen appears. Choose either Easy Install, Custom Install or
Uninstall from the pull-down menu in the upper left-hand side of the “Installation”
screen. Once you’ve made your choice, click on Install.
8) A message appears to confirm that the installation was successful. Now move onto
Step 1.
Fig.2.1
Download from Www.Somanuals.com. All Manuals Search And Download.user manual | page 9
Getting Connected
LaCie mini
COMPANION HARD DRIVE
Windows 98 SE and Windows Me Users Only! Silverlining 98 Installation
Before connecting the power supply and USB 2.0 cable cable to your drive, you will need to install Silverlining 98, which will
help you manage your drive. Follow the steps below to install the necessary drivers and software to configure your drive.
Then move on to the power supply and USB 2.0 cable installation steps.
1) Insert the LaCie Storage Utilities CD-ROM in your computer’s internal CD/DVD drive and open the disc (Fig.2.2).
2) Double-click the Silverlining 98 folder.
3) Double-click the Silverlining98_Install.EXE icon.
4) Silverlining 98 will then initialize the install screen.
5) The “Welcome” screen will appear. Click Next.
6) The “Destination Location” screen will appear. To alter the location
where the software is installed on your system, click the Browse
button. If you do not want to change the location, do not click on the
Browse button, and allow the software to be installed in its default
location. Click Next to continue.
7) Next is the “Start Installation” screen. Click Next.
8) The software installation will begin, and you will see the installation
screens.
9) Finally, you will see the “Silverlining 98 has been installed
correctly” screen. Click Finish to complete the installation.
Now move onto Step 1.
Fig.2.2
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 10
Getting Connected
LaCie mini
COMPANION HARD DRIVE
Step 2.1 –
Connect the power supply and switch on the drive.
1
Power Supply Brick
3
2
Cable B
4
Cable A
There are two cables that are supplied with the power supply: one cable (A) connects to a power outlet, such as a wall outlet
or a surge protector; and the other cable (B) connects to the LaCie drive.
Connect Cable A to your LaCie mini.
1
Connect Cable B to the Power Supply brick.
Connect Cable B to a wall outlet.
2
3
4
Turn the drive on and off by using the On/Off switch.
Warning! Use only the AC adapter supplied with your specific LaCie mini. Do not use a power supply from another
LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage to the device
and void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the
adapter may result in damage to your drive and will void your warranty.
Important Note: You may use your LaCie mini when in a foreign country, thanks to its autoswitching 100-240 Volt
power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. Consult
LaCie Technical Support for assistance in choosing the right adapter. LaCie accepts no responsibility for any damage
to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized by LaCie
will void your warranty.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 11
Getting Connected
LaCie mini
COMPANION HARD DRIVE
Step 2.2 –
Connect the USB 2.0 Cable to Your LaCie mini and to Your Computer
5
2
USB 2.0 Logo
1
USB 1.1 Logo
Examine the cable carefully and make sure that you have the USB 2.0 cable properly aligned, then insert the cable
firmly into the USB port on the back of the drive for a stable connection.
1
2
Look for a USB 2.0* logo (which generally is used to identify the port) next to the connector on the front or back of
your computer, then insert the cable firmly into the USB port for a stable connnection.
Tech Note: Please refer to section 4.1 Advice for Optimizing USB 2.0 Connections for important information on
disconnecting USB 2.0 devices and ensuring optimum performance. To achieve USB 2.0 speeds, your drive must be
connected to a USB 2.0 host port. If it is connected to a USB 1.1 port, your drive will operate at USB 1.1 speeds. For
more details, see 4.1 Advice for Optimizing USB 2.0 Connections.
Important Note: Windows Users: It may take a few seconds for your computer to recognize the drive and assign it a
letter.
Mac Users: It may take a few seconds for the drive to appear on your desktop.
Mac OS 9.x Mac OS 10.x
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 12
Using Your LaCie Drive
LaCie mini
COMPANION HARD DRIVE
3. Using Your LaCie Drive
Tech Note: Windows Users! This
LaCie Hard Drive is formatted for
the Mac operating system, and you will
need to re-format the drive in order for it
to appear and operate under the
Windows operating system.
Formatting a disk consists of the following: the operating system erases all of
the bookkeeping information on the disk, tests the disk to make sure that all of
the sectors are reliable, marks bad sectors (i.e., those that are scratched) and
creates internal address tables that it later uses to locate information.
As you format the drive, you will have the opportunity to divide the hard drive
into sections, called partitions. A partition is a section of the hard drive’s
storage capacity that is created to contain files and data.
Important Note: If you will be
using this drive between Mac and
Once formatted, the actual available storage capacity varies, depending on
operating environment, and is generally about 10% less than the non-
formatted capacity.
Windows operating environments, you can
create two partitions: one 32GB FAT 32
volume, and one large Mac OS Extended
volume. There are certain limitations to this
configuration, though; to achieve the best
performance and reliability, it is
recommended that you utilize a third-party
utility, such as Mediafour’s MacDrive,
which allows Windows computers to read
and write files on a volume formatted for
the Mac.
File System Formats
There are three different file system formats that are predominately found in
Mac and Windows environments:
•Mac OS Extended (HFS+) - for Mac OS 9.x and Mac OS 10.x
•NTFS - for Windows 2000 and XP
•FAT 32 - for Windows Me and legacy operating systems
Mac Users
Windows Users
• If you will be using the drive in a strictly Mac OS
environment, leave the drive formatted as one large Mac
OS Extended volume.
• If you will be using this drive between Windows
98SE, Me, 2000 and/or XP environments, it is
recommended that you create two partitions: one that is
a 32GB FAT 32 (MS-DOS File System) volume, and the
other as a large NTFS volume.
• If you want to be able to install multiple Mac operating
systems on the LaCie Drive, partition the drive into
multiple Mac OS Extended volumes.
• If you will be using the drive in a strictly Win
2000/XP environment, create one large NTFS volume.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 13
Using Your LaCie Drive
LaCie mini
COMPANION HARD DRIVE
3.1 Formatting And Partitioning Your LaCie mini
3.1.1. Mac Users
The LaCie mini is pre-formatted in HFS+ for immediate use on Apple computers so you do not need to reformat it. If you want
to reformat it, see below.
• Mac OS 9.x – Install and use LaCie Silverlining Pro, which is included with your drive.
• Mac OS 10.x – Use the Apple Disk Utility application, which is native to the operating system.
For instructions on installing and using Silverlining Pro, please refer to the Silverlining manual, located on your LaCie Storage
Utilities CD, in PDF format.
Formatting And Partitioning Using Mac OS 10.x
Warning! Following these steps will erase anything that is on the hard drive. Therefore, if you have information that
you want to protect or continue to use, backup this information before performing these steps.
1) Connect the drive to the computer via the USB 2.0 port.
2) Once the drive mounts onto the desktop, go to the Menu Bar, and open Go.
3) From the Go menu, click on Applications.
4) In the Applications menu, open the Utilities
folder, and then double-click Disc Utility from the
Utilities folder.
5) The Disc Utility window will open. In the left side
of the window will be a list of the available hard
disk drives. You should see a volume that represents
your internal hard drive, and one that reads LaCie.
6) Select the LaCie drive, and then click on the
Partition tab.
7) From the Volume Scheme: button, choose the
number of partitions you want to divide the drive
into by clicking on the pull down menu starting with
Current (Mac OS 10.x gives you the option of
dividing the drive into at most 8 partitions). You can
customize the size of the partitions by using the
slide bar between the partitions in the Volume
Scheme: area.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 14
Using Your LaCie Drive
LaCie mini
COMPANION HARD DRIVE
8) In the Volume Information section, create a name for each partition, choose the volume format (Mac OS Extended, Mac
OS Standard or UNIX File System) and the volume size.
Important Note: Please refer to section 4.2. File System Formats, for a more detailed discussion on the differences
between the two systems.
Important Note: Apple recommends that unless you have a specific reason to use the UNIX File System (UFS), you
should use the Mac OS Extended format since it provides a more familiar experience to Macintosh users.
9) In the Options section, click the Install Mac OS 9 Disk Drivers box if you plan on sharing the drive between the Mac OS
9.x and Mac OS 10.x.
10) Once you have finalized the volume format, number of partitions, size and options, click OK. The following message will
appear: “Warning! Saving the new volume will erase all existing volumes. This can NOT be undone. Are you sure you want
to do that?” Click Partition to continue.
11) Mac OS 10.x will automatically setup the disk with the partitions and volume format you selected, and your new drive
will be available for use.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 15
Using Your LaCie Drive
LaCie mini
COMPANION HARD DRIVE
3.1.2. Windows Users
The LaCie mini is formatted in HFS+ so Windows users must reformat it. If you use only Windows 2000 and XP, format the
drive in NTFS. If you want cross platform use between Windows and Mac and or Windows 98 SE and Me, please use FAT32.
• Windows 98 SE and Me – Install and use LaCie Silverlining 98, which is included with your drive.
• Windows 2000 and XP – Use the Disk Management Utility, which is native to the operating system.
For instructions on installing and using Silverlining 98, please refer to the Silverlining manual, located on your LaCie Storage
Utilities CD, in PDF format.
Formatting And Partitioning Using Windows 2000 And Windows XP
The process of formatting and partitioning a drive on a computer running Windows 2000 or Windows XP consists of two
steps: (1) installing a signature on the drive, and (2) partitioning/formatting the drive. These steps will erase anything that is
on the disk.
1) Connect the drive to the computer via the USB 2.0 port.
2) Right-click My Computer and click Manage.
3) From the Computer Management window, select Disk Management (located below the Storage group).
4) If this is the first time the drive is being formatted, Windows 2000 will launch the Write Signature Wizard (Write Initialize
Wizard in Windows XP). Click Next.
5) Windows will list the new
drive(s) attached. If you are
formatting a single drive, only
one drive should be visible.
Select the checkbox next to the
drive and click Next.
Important Note:
Check the "quick
format" box.
6)Click Finish to exit the
Wizard.
7) Now, with the disk
management window open, a
new drive will be visible. Right-
click on the available space
and select Create Partition...
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 16
Using Your LaCie Drive
LaCie mini
COMPANION HARD DRIVE
8) This will bring up the Create Partition Wizard. Click Next.
9) Select Primary Partition. Click Next.
10) Here you must specify partition size. It is recommended that you leave
the partition set to the maximum available size, unless you want multiple partitions on the same drive. Click Next.
11) Select Assign drive letter and select the desired letter for the drive. Click Next.
12) Select Format this partition… and then select a file system:
FAT32
FAT32 is a file system that is compatible with Windows 98 SE, Windows
Me, Windows 2000 and Windows XP; however, it has limitations. In
Windows 2000 and Windows XP, you will not be able to create a partition
greater than 32GB.
NTFS
NTFS is a newer file system that is compatible only with Windows NT, Windows 2000 and Windows XP. It has fewer
limitations than FAT 32 and will enable a partition to be created that is larger than 32GB.
Important Note: Please refer to section 4.2. File System Formats, for a more detailed discussion on the differences
between the two systems.
13) Click Next.
14) Click Finish.
15) Disk Management will create the partition and begin formatting the
drive. Once completed, close Disk Management and your new drive will be
ready to use.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 17
Helpful Information
LaCie mini
COMPANION HARD DRIVE
4. Helpful Information
4.1. Advice For Optimizing USB 2.0 Connections
The following technical information relates to your LaCie Drive and gives some
practical advice:
USB 2.0 Logo
USB 1.1 Logo
4.1.1 What is USB 2.0?
The new USB 2.0 standard provides higher bandwidth for high-speed peripherals
such as external hard drives, high-speed scanners and CD-RW drives. USB 2.0
delivers transfer rates up to 480Mb/s, while conveniently maintaining backward
compatibility with USB 1.1 devices.
USB 2.0 can still be used to connect lower-speed USB 1.1 ports and devices like digital cameras, scanners, modems,
keyboards, mice, joysticks and printers. In the USB 2.0 system, existing USB peripherals do not have to be upgraded, and
lower-speed devices will not require additional performance, instead operating as USB 1.1 devices.
USB Cables and Connectors
Your LaCie drive is shipped with a USB 2.0-certified USB cable, to ensure maximum data transfer performance when
connected to a USB 2.0 port. The cable will also work when connected to a USB 1.1 port, but drive performance will be
limited to USB 1.1 transfer rates.
There are also different types of USB connections, such as the mini-cable and device end. Make sure that you have the
correct type of connection on computer. Consult LaCie Customer Support or your LaCie reseller for more information.
USB 2.0 Host Bus Adapters and Performance
To utilize the newly-enhanced USB 2.0 performances, your computer must be equipped with a USB 2.0 host bus adapter
card (sold separately, such as the LaCie USB 2.0 PCI Card, or integrated by your PC manufacturer) and the appropriate
drivers. These host bus adapter cards, which include one or more USB ports, are shipped with special USB 2.0 drivers that
enable the computer to control the card. These drivers must be installed in order for USB 2.0 devices connected to the port to
work at their correct speeds. For installation instructions, please refer to the documentation that comes with the host adapter
card.
LaCie supplies only the appropriate USB 2.0 drivers for its peripherals and does not provide drivers for third-party host
adapter cards. To obtain the right drivers for your host adapter card, visit your card manufacturer’s Internet site.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 18
Helpful Informaion
LaCie mini
COMPANION HARD DRIVE
4.1.2. Disconnecting USB 2.0 Devices
USB 2.0 external devices feature "plug & play" connection. This means that your drive can be connected and disconnected
while the computer is running. To prevent failures, it is important you follow these steps when disconnecting your USB 2.0
device.
Windows Users
Important Note: Windows 98 SE Users: If you have installed the Windows Storage Supplement Update, you will
have to unmount the drive before disconnecting it or powering it down. If you have not installed the update, simply
disconnect the drive when it is not active. No unmounting is required.
1) From the System Tray (located in the lower right-hand side of your screen), click on the Eject
icon (a small green arrow over a hardware image).
Fig.4.1.4
2) A message will appear, detailing the devices that the Eject icon controls, i.e. "Safely remove…" Click on this prompt.
3) You will then be given the following message: "Safe to Remove Hardware" (or similar). It is now safe to disconnect the device.
Mac Users
You must unmount the hard drive system before disconnecting it or powering it down. Either:
• Drag the hard drive icon to the trash.
• Launch Silverlining Pro, highlight the hard drive and select “Unmount.”
The drive can now be disconnected.
Mac OS 9.x Mac OS 10.x
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 19
Helpful Informaion
LaCie mini
COMPANION HARD DRIVE
4.1.3. Data Transfers
Data transfers are the flow of data that accomplishes a task, usually related to moving data from storage to computer RAM or
between storage devices. During data transfers, it’s best to wait before launching other applications on the same USB 2.0
port. Anomalies may arise with computers that have USB 2.0 controllers* that do not conform to OHCI (Open Host Controller
Interface) standards. In any other configurations, we cannot ensure 100% correct operation. Due to this, you may encounter
hanging problems. If this happens, proceed as follows:
1) Make sure that the USB 2.0 cable is connected tightly and securely on both ends of the cable, from the drive to the
computer. If you are using a USB 2.0 cable other than the one supplied with your LaCie drive, check that it is USB 2.0
certified. The cable that is provided with your LaCie drive is USB 2.0 certified.
Warning! Do not connect USB 2.0 cables so that they form a ring of devices. There is no need for terminators on
USB 2.0 devices, so the unused USB 2.0 connectors should be left empty.
2) Check that the power supply and ground connection are seated properly.
3) Disconnect your computer’s USB 2.0 cable. Wait 30 seconds. Reconnect.
Tech Note: *Controller - This is a component or an electronic card (referred to in this case as a “controller card”) that
enables a computer to communicate with or manage certain peripherals. An external controller is an expansion
card which fills one of the free slots (i.e. PCI or PCMCIA) inside your PC and which enables a peripheral (i.e. CD-
R/RW drive, mini , scanner or printer) to be connected to the computer. If your computer is not equipped with a USB
2.0 controller card, you can purchase an external controller through LaCie. Contact your LaCie reseller or LaCie
Technical Support (6. Contacting Customer Support) for more information.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 20
Helpful Informaion
LaCie mini
COMPANION HARD DRIVE
4.2 File System Formats
4.2.1. Mac Users
The LaCie mini comes preformatted in HFS+ (Mac OS Extended).
Mac OS 9.x Users:
You will be able to format the drive in one of two formats, using Silverlining Pro (for specific instructions, please refer to the
Silverlining User’s Manual, in the Silverlining folder): HFS (Mac OS Standard) or HFS+ (Mac OS Extended).
Important Note: If you will be sharing the hard drive between Macs and Windows operating environments, you will
want to reformat the drive in FAT 32.
HFS+ - Mac OS Extended
Mac OS Extended refers to the file system used by Mac OS 8.1 and later. HFS+ represents an optimization of the older HFS
file system by using hard disk space more efficiently. Building off of HFS, they increased the number of blocks from 65,536 to
4.29 billion. With HFS+, you are no longer limited by block size.
Mac OS 10.x Users: You have the option of formatting the drive in one of four formats: Mac OS Standard (HFS), Mac OS
Extended (HFS+), MS-DOS File System and UNIX File System (UFS).
HFS - Mac OS Standard
Mac OS Standard refers to the file system used by Mac OS 8.0 and earlier. This is no longer a modern file sytem
specification, and Mac OS Extended is more efficient. Only use this file system if you are creating a volume smaller than
32MB, using a Mac with a 680X0 processor, or you are creating a file structure that will be need to be used by Macs using
Mac OS 8.0 or earlier.
MS-DOS File System
This is the Microsoft file system, more typically known as FAT 32. This is the file system to use if you are going to be using
your LaCie hard drive between Macs and Windows operating systems.
UNIX File System
This is the file system based on UNIX, and is preferrable for users developing UNIX-based applications within Mac OS 10.x.
Unless you have a specific reason to use the UNIX File System, you should instead use Mac OS Extended (HFS+), because it
provides Mac users with a more familiar operating experience.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 21
Helpful Informaion
LaCie mini
COMPANION HARD DRIVE
4.2.2. Windows Users
Since the LaCie mini comes preformatted for the Mac operating system, you will need to reformat the drive in one of the two
file system formats for Windows: FAT 32 and NTFS. The following information will hopefully make choosing one or the other
a little easier.
FAT 32
FAT is an acronym for File Allocation Table, which dates back to the beginnings of DOS programming. Originally, FAT was
only 16 bits, but after the second release of Windows 95 it was upgraded to 32 bits, hence the name FAT 32. In theory, FAT
32 volume sizes can range from less than 1MB all the way to 2TB. It is the native file system of Windows 98 and Windows
Me, and is supported by Windows 2000 and XP. When FAT 32 is used with Windows 2000 and XP, though, volume size is
limited to 32GB (by the Windows partition utility, i.e. Disk Manager), and the individual file size is limited to 4GB.
NTFS
This acronym stands for New Technology Filing System, and it is the native file system for Windows NT, Windows 2000 and
XP. NTFS offers several features that are not available with FAT 32; i.e. file compression, encryption, permissions, and
auditing, as well as the ability to mirror drives and RAID 5 capabilities. The minimum supported volume size for NTFS is
10MB, with a maximum of 2TB, with no limit to file size. Volumes created in NTFS can only be directly accessed (not through
shares) by Windows NT, Windows 2000 and XP, without resorting to help from third-party products.
Guidelines for Choosing FAT 32 Or NTFS
Use FAT 32 if:
• You want to access your data on any Operating System - FAT 32 is compatible with Windows 98 SE, Me, 2000, XP, NT,
Mac OS 9.x and Mac OS 10.x.
• You will be dual booting with an Operating System other than Windows NT or Windows 2000.
• You may need the ability to dual boot down the line. Once you have converted a volume from NTFS to FAT 32, there is no
going back. You can convert from FAT 32 to NTFS, but not the other way around.
Use NTFS if:
• You want to optimize drive performance under Windows 2000 or XP.
• You want to encrypt files, assign permissions to files, or want to audit files for access.
• You will be formatting partitions larger than 32GB.
• You need to store individual files that are larger than 4GB.
• You need a filing system that can be mirrored or structured like a RAID 5 configuration.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 22
Troubleshooting
LaCie mini
COMPANION HARD DRIVE
5. Troubleshooting
In the event that your LaCie mini is not working correctly, please refer to the following checklist to find out where the problem
is coming from. If you have gone through all of the points on the checklist and your drive is still not working correctly, please
have a look at the FAQs that are regularly published on our Web site – www.lacie.com. One of these FAQs may provide
an answer to your specific question. You can also visit the drivers pages, where the most recent software updates will be
available.
If you need further assistance, please contact your LaCie reseller or LaCie Technical Support (see 6. Contacting Customer
Service for details).
Manual Updates
LaCie is constantly striving to give you the most up-to-date, comprehensive User’s Manuals available on the market. It is our
goal to provide you with a friendly, easy-to-use format that will help you quickly install and utilize the many functions of your
new device. If your manual does not reflect the configurations of the product that you purchased, please check our Web site
for the most current version available.
The Issue
Questions to Ask
Possible Solutions
The drive is not
recognized.
Is the drive’s power on?
Check to see that all of the power cords are properly
connected and that the switch on the rear of the drive is
turned on. If you are using a surge protector, make sure that
it is switched on, too.
Does an icon for the drive appear Check for an icon on the Desktop (on a Mac) or in My
on the computer?
Computer (on a PC).
Are all of the cables connected
securely and correctly?
Make sure that all the steps in section 2. Getting Connected
have been followed correctly. Examine the connections
carefully to ensure that all the cables are inserted in the
correct orientation and in the correct location.
Are both ends of the USB cable
connected and properly seated?
Check both ends of the USB cable. Disconnect them, wait 10
seconds, and reconnect them. If the drive is still not
recognized, restart your computer and try again.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 23
Troubleshooting
LaCie mini
COMPANION HARD DRIVE
The Issue
Questions to Ask
Possible Solutions
The drive is not
recognized.
Are the USB drivers installed
correctly and enabled?
Mac Users: Open Apple System Profiler and click on the
Devices and Volumes tab. If your device is not listed, recheck
the cables and try the other troubleshooting solutions listed
here.
Tech Note: Mac Users: Apple is constantly providing updated support for drive mechanisms within OS 10.x. To
ensure that you have the latest support, upgrade to the latest version of OS 10.x. To access the latest updates an
upgrades, pull down the Apple Menu and click on System Preferences. In the section titled System, click on
Software Update and then click Update Now. Your computer will then automatically connect via the Internet to
access the latest updates from Apple.
Windows 98 SE & Me Users: Go to Start > Settings >
Control Panel > System > Device Manager > USB Controller
> click on the plus sign next to the controller icon, and you
should see your device listed.
Tech Note: Windows Users: Microsoft
consistently posts updated drivers and support
fixes for their operating systems. Go to
Microsoft’s Web site, support.microsoft.com,
for more information.
Windows 2000 Users: Go to Start > Settings > Control
Panel > System > Hardware tab > Device Manager button >
USB Controller > click on the plus sign next to the controller
icon, and you should see your device listed.
Windows XP Users: Go to Start > Control Panel >
Performance and Maintenance > System > Hardware tab >
Device Manager button > USB Controller > click on the plus
sign next to the controller icon, and you should see your
device listed.
Is there a conflict with other device If you cannot see the device, recheck the cables and try the
drivers or extensions?
other troubleshooting solutions listed here.
Consult LaCie Technical Support. See section 6. Contacting
Customer Support for more details.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 24
Troubleshooting
LaCie mini
COMPANION HARD DRIVE
The Issue
Questions to Ask
Possible Solutions
The drive is not
recognized.
Is the file system supported by your Check the documentation for your Operating System.
Operating System?
Does your computer’s configuration Check section 1.1. Minimum System Requirements.
meet the minimum system
requirements for use with this drive?
Was the drive originally formatted If the drive is configured as a removable drive under
as a removable disk?
Windows 98SE or Windows Me, the removable setting will
need to be re-checked each time that the drive is taken to a
new system. To do this, go to the Device Manager and click
on the Drives Settings tab.
Error messages under Did you get an Error –50 message When copying files or folders from Mac OS 10.x to a FAT 32
Mac OS 10.x.
while copying to a FAT 32 volume? volume, certain characters cannot be copied. These
characters include, but are not limited to:
? < > / \ :
Check your files and folders to ensure that these types of
characters are not being used.
Did you get an error message
Simply ignore this message. The drive will remount to the
telling you that the drive has been desktop. LaCie drives conserve power by spinning down
disconnected when coming out of
sleep mode?
when you set your computer to sleep mode, and when the
computer is “woken” from sleep, it does not give the drive
enough time to spin-up from its sleep mode.
The drive is working
slowly.
Are other USB devices connected to Disconnect any other USB devices and see if performance
the same port? improves.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 25
Troubleshooting
LaCie mini
COMPANION HARD DRIVE
The Issue
Questions to Ask
Possible Solutions
The USB 2.0 drive is not Is the drive connected to a USB 1.1 If so, it is normal that the drive runs at USB 1.1 speeds. A
running noticeably
faster than a USB 1.1
drive.
port on your computer, or to a USB USB 2.0 device can only run at USB 2.0 speeds when con-
1.1 hub?
nected to a USB 2.0 port or hub and controlled by the appro-
priate USB 2.0 drivers.
Is the drive connected to a USB 2.0 Check to see that the USB 2.0 drivers for your Host USB 2.0
port on your computer?
port and for your USB 2.0 device have been correctly
installed (see the 4.1.1 What Is USB 2.0? section for a more
detailed discussion). If in doubt, uninstall the driver and then
reinstall it.
Does your computer or operating
system support USB 2.0?
See the 4.1.1 What Is USB 2.0? section for a more detailed
discussion.
Tech Note: Technically, you can connect up to 127 devices to a single USB bus. For more than two devices, you
must make new connections using a peripheral called a "hub." A hub, which you hook up directly to a USB connec-
tor on your computer, usually has 4 or 7 output connections enabling you to connect the same number of peripher-
als. One of the hub's main functions is to regenerate signals that lose part of their strength as they are transmitted
via the USB cable. By connecting yet another hub to a connector on the existing hub, you can then plug in a new
set of peripherals and so on, up to a maximum of 127.
You can use your USB 2.0 devices with USB 1.1 hubs, but the peripherals will be limited to USB 1.1 performance
levels. As USB 2.0 is backwards compatible, you will be able to connect USB 1.1 devices to USB 2.0 hubs; howev-
er, the USB 1.1 devices will still maintain their normal performance levels (i.e. 12 Mb/s).
In practice, users who desire enhanced USB 2.0 throughput will need to connect their USB 2.0 hardware on both
ends of a 2.0 hub to achieve the "high-speed" mode. On one end, a USB 2.0 compliant host controller resides on
the host PC to manage the enumeration process and power management. On the other end, USB 2.0 hardware
must be connected directly to the root hub or through a USB 2.0 hub.
Some hubs have no power supply and others are self-powered. When you choose a hub, opt for the self-powered
variety, as they have their own AC adapter. The most powerful hubs provide 0.5A of power to each port. If you buy
a hub, make sure that it supports per-port switching. This function prevents the entire chain of peripherals from
freezing up if one of them is not working properly or is down.
Important Note: Avoid using USB connectors found on certain peripherals such as keyboards. These are passive (or
pass-through) connectors that lead to power loss and unstable operation.
Important Note: Only use USB cables shorter than 5 meters (approximately 15 feet). Using longer cables cause the
peripherals to malfunction due to excessive reduction in electrical signal strength.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 26
LaCie Technical Support
LaCie mini
COMPANION HARD DRIVE
6. Contacting Customer Support
Before You Contact Technical Support
1) Read the manuals and review the Troubleshooting section.
2) Try to isolate the problem. If possible, make the drive the only external device on the CPU, and make sure that all of the
cables are correctly and firmly attached.
If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can't get your LaCie drive
to work properly, contact us via the provided Web link. Before contacting us, make sure that you are in front of your
computer and that you have the following information on hand:
• Your LaCie drive's serial number (on the bottom of your drive)
• Operating system(Mac OS or Windows) and version
• Computer brand and model
• Names of CD or DVD drives installed on your computer
• Amount of memory installed
• Names of any other devices installed on your computer
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 27
LaCie Technical Support
LaCie mini
COMPANION HARD DRIVE
LaCie Australia
Contact Us At:
LaCie Asia, Singapore and Hong Kong
Contact Us At:
LaCie Belgium
LaCie Canada
Contact Us At:
Contact Us At:
LaCie Denmark
LaCie Finland
Contact Us At:
Contact Us At:
LaCie France
LaCie Germany
Contact Us At:
Contact Us At:
LaCie Italy
LaCie Japan
Contact Us At:
Contact Us At:
LaCie Netherlands
LaCie Norway
Contact Us At:
Contact Us At:
LaCie Spain
LaCie Sweden
Contact Us At:
Contact Us At:
LaCie Switzerland
Contact Us At:
LaCie United Kingdom & Ireland
Contact Us At:
LaCie USA
LaCie Grand Export
Contact Us At:
Contact Us At:
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 28
Warranty
LaCie mini
COMPANION HARD DRIVE
7. Warranty
LaCie warrants your drive against any defect in material and workmanship, under normal use, for the period designated on
your warranty certificate. In the event this product is found to be defective within the warranty period, LaCie will, at its option,
repair or replace the defective drive.
This warranty is void if:
• The drive was operated/stored in abnormal use or maintenance conditions;
• The drive is repaired, modified or altered, unless such repair, modification or alteration is expressly authorized in writing by
LaCie;
• The drive was subjected to abuse, neglect, lightning strike, electrical fault, improper packaging or accident;
• The drive was installed improperly;
• The serial number of the drive is defaced or missing;
• The broken part is a replacement part such as a pickup tray, etc.
• The tamper seal on the drive casing is broken.
LaCie and its suppliers accept no liability for any loss of data during the use of this device, or for any of the problems caused
as a result.
LaCie will not, under any circumstances, be liable for direct, special or consequential damages such as, but not limited to,
damage or loss of property or equipment, loss of profits or revenues, cost of replacement goods, or expense or inconvenience
caused by service interruptions.
Any loss, corruption or destruction of data while using a LaCie drive is the sole responsibility of the user, and under no
circumstances will LaCie be held liable for the recovery or restoration of this data.
Under no circumstances will any person be entitled to any sum greater than the purchase price paid for the drive.
To obtain warranty service, call LaCie Technical Support. You will be asked to provide your LaCie product’s serial number, and
you may be asked to furnish proof of purchase to confirm that the drive is still under warranty.
All drives returned to LaCie must be securely packaged in their original box and shipped with postage prepaid.
Download from Www.Somanuals.com. All Manuals Search And Download
u.ser manual | page 29
LaCie USA 22985 NW Evergreen Pkwy Hillsboro, OR 97124
LaCie France 17, rue Ampère 91349 Massy Cedex
Download from Www.Somanuals.com. All Manuals Search And Download.
|