WIRELESS 915 MHz TEMPERATURE STATION
Instruction Manual
Contents
Language
Page
TABLE OF CONTENTS
___________________________________________________________
Topic
Page
3
4
6
9
10
12
14
18
33
34
38
41
42
43
44
Inventory of Contents
Features
Setting Up
WWVB Radio Controlled Time
Battery Installation
Function Keys
LCD Screen and Settings
Manual Settings
English
French
Spanish
2
53
103
Alarm setting
Weather Forecast and Tendency
Display of Temperature and Humidity Readings
Sunrise, sunset, sun duration
Moon phases
915 MHz Reception
Positioning
1
2
FEATURES:
Care and maintenance
Specifications
Warranty
46
47
48
51
The Weather Station
Battery compartment cover
FCC Disclaimer
LCD Display
Hanging hole
INSTANT TRANSMISSION is the state-of-
the-art new wireless transmission
technology, exclusively designed and
developed by LA CROSSE TECHNOLOGY.
INSTANT TRANSMISSION offers you an
immediate update (every 4 seconds!) of all
your outdoor data measured from the
transmitters: follow your climatic
This product offers:
variations in real-time!
Foldout Stand
Function Keys
Function Keys
INVENTORY OF CONTENTS
WWVB Radio controlled time with manual setting options
WWVB Time reception ON/OFF
12/24 hour display
Hour, minute and second time display
Calendar (weekday, date, month and year)
1.
2.
3.
Wireless Temperature Station WS-9711U-IT
Wireless Temperature Transmitter TX29U-IT
Instruction Manual
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT:
Note: If the WWVB tower icon flashes on the top left of the LCD, but does not set the time
Transmission problems will arise if the setting for additional sensors is not followed as
described above. Should transmission problems occur, it is necessary to remove the
batteries from all units and start the setup again from step 1.
or the tower does not appear at all, then please note the following:
Recommended distance from any interfering sources like computer monitors or TV
sets is a minimum of 6 feet (2 meters).
Note: Daily WWVB reception (Atomic time) is attempted at the top of each hour between
12:00 am to 6:00 am. If the reception is successful, there is no reception attempt until the
following day. When this is successful, the received time will override the manually set time.
The date is also updated with the received time. (Please also refer to the notes on “WWVB
Radio Controlled time” and “Manual Time Setting”)
With ferro-concrete rooms (basements, superstructures), the received signal is
naturally weakened. In extreme cases, please place the unit close to a window and/ or
point its front or back towards the Fort Collins, Colorado transmitter.
During nighttime, the atmospheric disturbances are usually less severe and reception
is possible in most cases. A single daily reception is adequate to keep the accuracy
deviation below 1 second.
In case the Weather Station is not able to detect the WWVB-signal (disturbances,
transmitting distance, etc.), the time can be manually set (please refer to the notes on
Manual time setting).
WWVB RADIO CONTROLLED TIME
The NIST (National Institute of Standards and Technology – Time and Frequency Division
WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time signal
continuously throughout the United States at 60 kHz. The signal can be received up to 2,000
miles away through the internal antenna in the Wireless Weather Station. However, due to
the nature of the Earth’s ionosphere, reception is very limited during daylight hours. The
Wireless Weather Station will search for a signal every night when reception is best. The
WWVB radio station receives the time data from the NIST Atomic clock in Boulder,
Colorado. A team of atomic physicists is continually measuring every second, of every day,
to an accuracy of ten billionths of a second per day. These physicists have created an
international standard, measuring a second as 9.192.631.770 vibrations of a Cesium-133
atom in a vacuum. This atomic clock regulates the WWVB transmitter.
INSTALL OR REPLACE BATTERIES IN THE WEATHER STATION
The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. To install or replace the
batteries, please follow the steps below:
1.
2.
Remove the cover at the back of the Weather Station.
Insert batteries observing the correct polarity (see
marking).
3.
Replace compartment cover.
9
10
SNOOZE/ SUN key
INSTALL OR REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The Temperature Transmitter uses 2 x AA, IEC LR6 and a 1.5V battery.
To install or replace the batteries, please follow the steps below:
FUNCTION KEYS:
Weather Station:
1.
Remove the battery compartment cover at the back of the
transmitter.
ALM key
SET key
2.
3.
Insert the batteries, observing the correct polarity (see marking).
Replace the battery compartment cover on the unit.
Note:
MIN/ MAX key
CH/ + key
When changing batteries in any of the units, all units need to be reset
by following the setup procedures. This is because a random security
code is assigned by the transmitter at start-up and this code must be received and stored by
the Weather station in the first 3 minutes of power being supplied to it.
BATTERY CHANGE:
SET:
It is recommended to replace the batteries in all units regularly to ensure optimum accuracy
of these units (Battery life See Specifications below).
This key is used to:
Enter the set mode for the following functions: LCD contrast, Time zone, Daylight
saving time ON/OFF, Time Reception ON/OFF, 12/24 hour display, Manual time,
Year, Month, Date, Sunrise/ Sunset city location, Snooze time duration, °F/°C, and
Weather forecast sensitivity settings.
Please participate in the preservation of the environment. Return used
batteries to an authorized depot.
Toggle between the display of "Weekday + date + month", "Second", "Alarm time",
and "Date + month + year".
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Press and hold for 3 seconds to reset the maximum/ minimum temperature and
humidity records of indoor and the currently selected outdoor channel at the same
time (will reset all records to current level).
Stop the alarm
Switch on the backlight
CH/ + key
This key is used to:
Toggle between the Outdoor transmitters 1, 2 and 3 (if more than 1 transmitter is
used)
Adjust LCD contrast, time zone, Time Reception ON/OFF, 12/24 hour display, hour,
minute, year, month, day, snooze time duration, °F/°C and weather forecasting icon
sensitivity in setting modes
MIN/ MAX
This key is used to:
Adjust the alarm time in alarm setting mode
Stop the alarm
Switch on the backlight
Toggle between the maximum/ minimum outdoor temperature and maximum/
minimum indoor temperature and humidity data
Note: The Time/date shown is corresponding to MIN/MAX temperature data.
SNOOZE/ SUN key
This key is used to:
Stop the alarm
Switch on the backlight
Activate the snooze function for the alarm
Toggle between the sunrise time, sunset time, sun duration in the Sun display
Exit manual setting mode and alarm setting mode
Switch on the backlight
ALM key (alarm)
This key is used to:
Press for about 3 seconds to enter the Alarm set mode
Activate/ deactivate the alarm
Stop the alarm
LCD SCREEN AND SETTINGS:
The LCD screen is split into 5 sections displaying the information for time, date, weather
forecast, indoors and outdoors.
Switch on the backlight
13
14
indicates whether the last reception was successful (“ON” icon) or not (“OFF” icon). If this
icon is blinking, the Temperature Station is currently receiving data.
Daylight
saving time
Weather
Tendency icon
Weather station low
battery icon
WWVB Tower Icon
(for time reception)
Alarm icon
Section 1 - TIME AND CALENDAR
Normal mode display of radio controlled time.
A reception tower symbol will be shown indicating that the WWVB time signal is
scanned for (flashing) or received (steady).
Indoor
Temperature
Time
Note:
The symbol will not be shown when radio time reception is not successful or when time
reception function is turned off.
Relative
Humidity in %
Calendar
Display of "Weekday + date + month", "Second", "Alarm time" or "Date + month +
year"
In normal display, the alarm icon will be shown when the alarm is turned on. Or when
the snooze function is activated, the alarm icon will be flashing.
Transmitter low
battery icon
Sunrise/ sunset
display
Outdoor
Temperature
Moon phase
display
Section 2 - Moon phase and Sunrise / Sunset
Displays the sunrise, sunset, and sun duration time
Displays the 12 different moon phases.
Outdoor
Reception
Signal*
Weather Forecast
icon (Weather girl)
Number showing
Transmitter unit
*When the signal from the transmitter is successfully received by the Temperature Station,
this icon will be switched on. (If not successful, the icon will not be shown on the LCD). This
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - WEATHER ICON (WEATHER GIRL)
MANUAL SETTINGS:
The weather is represented in the form of 15 weather symbols (Weather Girl), which
changes appearance depending on the air pressure development and the current
outdoor temperature.
The weather girl icon representations can be seen in the section "WEATHER
FORECAST AND TENDENCY".
To enter the manual setting mode, press and hold the SET key for approximately 3 seconds
until the first setting option appears and flashes (LCD contrast setting). From here, each time
the SET key is pressed the next available setting option will be selected and will flash to
indicate the current option. Once a setting has been made according to the specific
instructions that follow, press the SET button once to move the next desired setting or
repeatedly until the display returns to normal operating mode.
Section 4 - INDOOR TEMPERATURE AND HUMIDITY
Note: If no buttons are pressed within approximately 15 seconds while in any setting option,
the unit will return to normal operating mode.
Current indoor temperature and humidity.
By pressing the MIN/ MAX key, display of the stored MIN/MAX indoor temperature
and humidity, with simultaneous display of MIN/ MAX symbol in Section 5.
LCD contrast setting
Time zone setting
Daylight saving time (DST) ON/OFF setting
Time reception ON/OFF setting
12/24-Hour setting
Section 5 - OUTDOOR TEMPERATURE
Displays the current outdoor temperature.
By pressing the MIN/ MAX key, display of the stored MIN/MAX outdoor temperature
with simultaneous display of a MIN or MAX symbol.
By pressing the CH/ + key, display of outdoor sensors (up to three outdoor
transmitters). The number 1, 2 or 3 will be shown.
A signal reception symbol will be shown indicating that receiver is receiving outdoor
temperature.
Manual time setting
Manual calendar setting
Sunrise/ Sunset city location
Snooze setting
°F/ °C setting
Weather forecasting icon sensitivity setting
17
18
LCD CONTRAST SETTING
The time zone default of the Weather Station is -5. To change to another time zone:
1.
Press the SET key after completing the LCD contrast setting in order to enter the time
zone setting (flashing).
2.
Using the CH/ + key, set the time zone. The range runs from 12 to -12 in consecutive
1hour intervals. The U.S. time zones are (negative numbers) -5h (EST), -6h (CST), -
7h (MST) and –8h (PST) zones.
Flashing
3.
Press the SET key to confirm and enter the “Daylight Saving Time” (DST) or exit the
setting mode by pressing the SNOOZE/ SUN key
The LCD contrast can be set to 8 different levels (0 to 7) to suit the user’s needs (default
LCD contrast setting is LCD 5). To set the desired contrast level:
DAYLIGHT SAVING TIME (DST) ON/OFF SETTING
1.
Press and hold the SET key until the above display is seen. Press the CH/ + key to
select the level of contrast desired.
2.
Press the SET key to confirm and enter the “Time Zone setting” or exit the setting
mode by pressing the SNOOZE/ SUN key.
Note: The DST default is “ON”, meaning that the
Flashing
received time will automatically be adjusted according to
Daylight Saving Time in the spring and fall. For areas
that do not recognize DST changes turn the DST
‘’OFF’’.
TIME ZONE SETTING:
Flashing
Flashing
19
20
Download from Www.Somanuals.com. All Manuals Search And Download.
The default is ON for the daylight saving time setting
2.
3.
Use the CH/ + key to turn OFF the time reception function.
Confirm with the SET key and enter the “12/24-Hour Display setting” or exit the
setting mode by pressing the SNOOZE/ SUN key.
1.
DST starts flashing in the top left black bar and ‘’on” flashing in the bottom left section
above the city selection.
2.
3.
Use the CH/+ key to toggle between and select on or off.
Confirm selection with the SET key and enter the Radio Controlled Time Reception
ON/OFF Setting.
Note: If the Time Reception function is turned OFF manually, the clock will not attempt any
reception of the WWVB time as long as the Time Reception OFF function is activated. The
Time Reception icon will not be displayed on the LCD.
12/24 HOUR TIME DISPLAY SETTING
RADIO CONTROLLED TIME RECEPTION ON/OFF SETTING
Flashing (time
reception icon)
Flashing
1.
After setting time reception ON/OFF, press the SET key, “12h” or “24h” flashes in the
LCD. (default 12h)
Digit flashing
2.
3.
Press the CH/ + key to select the “12h” or “24h” display mode.
Press the SET again to confirm and to enter the “Manual Time setting” or exit the
setting mode by pressing the SNOOZE/ SUN key.
In area where reception of the WWVB time is not possible, the WWVB time reception
function can be turned OFF. The clock will then work as a normal Quartz clock (Default
setting is ON).
1.
The digit “ON” and the time reception icon will start flashing on the LCD.
21
22
Note: When 24h mode display is selected, the calendar format will be date and month
display. When 12h mode display is selected, the calendar format will be month and date
display.
Note: The unit will still try to receive the signal between 12:00 to 6:00 a.m. every day even if
the time has been manually set and if the WWVB time reception function has been set ON.
When it does receive the signal, it will change the manually set time into the received time.
During reception attempts the WWVB tower icon will flash. If reception has been
unsuccessful, then the WWVB tower icon will not appear but reception will still be attempted
the following hour.
MANUAL TIME SETTING
In case the Weather Station is not able to detect the WWVB-signal (for example due to
disturbances, transmitting distance, etc.), the time can be manually set. The clock will then
work as a normal Quartz clock.
CALENDAR SETTING
The date default of the Weather Station is 1. 1. of
the year 2005 after initial set-up. Once the radio-
controlled time signals are received, the date is
automatically updated. However, if the signals are
not received, the date can also be set manually. To
do this:
Minutes
(Flashing)
Hours
(Flashing)
To set the clock:
1.
2.
The hour digits start flashing in the time display section.
Use the CH/ + key to adjust the hours and then press SET key to go to the minute
setting.
The minute will be flashing. Press the CH/ + key to adjust the minutes.
Confirm with the SET key and enter the “Calendar Setting” or exit the setting mode
by pressing the SNOOZE/ SUN key.
Year
1.
Using the CH/ + key, set the year required.
The range runs from 2005 to 2029 (default is
2005).
"Date. Month." (for 24h time display)
"Month. Date." (for 12h time display)
3.
4.
2.
Press the SET key to enter the month setting
mode.
23
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
The month digit will be flashing. Press the CH/ + key to set the month and then press
the SET key to go to the date setting.
3.
Press the SET key to confirm selection and enter the Snooze Setting or exit the
manual setting mode by pressing the SNOOZE/ SUN key.
4.
5.
The date digit will be flashing. Press the CH/ + key to set the date.
Confirm with the SET key and enter the “City Setting for Sunrise, Sunset and Sun
duration” or exit the setting mode by pressing the SNOOZE / SUN key.
Note: City Selection is done in the Program Menu, not by pressing and releasing the
SNOOZE button. If your City is not available please choose a city directly North or South of
your location (even in different state) for the most accurate sunrise/set time.
The US cities are displayed as follows:
CITY SELECTION FOR SUNRISE, SUNSET AND SUN DURATION
The wireless Weather Station will display the sun rise/ sun set/ or sun duration for 99
selected US and Canada cities:
Short form of City location
(Flashing)
1.
2.
The city abbreviation starts flashing.
Use the CH/+ key to toggle through the 99 cities and select cit closest to your
location.
25
26
State, Code – City
Alabama
MGM – Montgomery
MOB – Mobile
Arkansas
State, Code – City
Kentucky
LEX – Lexington
State, Code – City
Oklahoma
OKC – Oklahoma City
TUL – Tulsa
Florida
Mississippi
JAN – Jackson
Texas
AMA – Amarillo
AIN – Austin
BRO – Brownsville
DFW – Dallas/Ft. Worth
ELP – El Paso
HOU – Houston
ODO – Odessa
SAT – San Antonio
JAX – Jacksonville
MIA – Miami
ORL – Orlando
TLH – Tallahassee
TPA – Tampa
Georgia
Montana
BIL – Billings
HLN – Helena
Louisiana
Oregon
LIT – Little Rock
NEW – New Orleans
SHV – Shreveport
Massachusetts
BOS – Boston
MFR – Medford
PDX – Portland
Pennsylvania
North Carolina
CLT – Charlotte
RDU – Raleigh
North Dakota
BIS – Bismarck
FAR – Fargo
Nebraska
ATL – Atlanta
Arizona
PHX – Phoenix
CXY – Harrisburg
PIT – Pittsburgh
SCR – Scranton
South Carolina
CHS – Charleston
CUB – Columbia
South Dakota
FSD – Sioux Falls
RAP – Rapid City
Hawaii
HNL – Honolulu
Utah
California
FAT – Fresno
LAS – Los Angeles
ROD – Redding
SAN – San Diego
SFO – San Francisco
Maine
AUG – Augusta
CAR – Caribou
SLC – Salt Lake City
Iowa
DSM – Des Moines
DVN – Davenport
Virginia
LYH – Lynchburg
ORF – Norfolk
Michigan
DET – Detroit
PZQ – Rogers city
LNK – Lincoln
SNY – Sidney
Colorado
Idaho
BOI – Boise
Illinois
ORD –Chicago
SPI – Springfield
New Hampshire
CON – Concord
New Jersey
Vermont
DEN – Denver
DRO – Durango
GUT – Grand Junction
PUB – Pueblo
Minnesota
DLH – Duluth
INL – International Falls
BTV – Burlington
Washington
SEA – Seattle
SFF – Spokane
Tennessee
MEM – Memphis
BNA – Nashville
DKX – Knoxville
TTN – Trenton
District of Columbia
Missouri
DCA – Washington D.C.
JEF – Jefferson City
27
28
Download from Www.Somanuals.com. All Manuals Search And Download.
New Mexico
ABQ – Albuquerque
SNOOZE SETTING:
Flashing
Indiana
West Virginia
EVV – Evansville
IND – Indianapolis
CRW – Charleston
Nevada
LAS – Las Vegas
RNO – Reno
Kansas
DDC – Dodge City
K32 – Wichita
TOP – Topeka
New York
BUF – Buffalo
JFK – New York City
SYR – Syracuse
Wisconsin
GBR – Green Bay
LSE – La Crosse
The snooze time can be set OFF or to a maximum time of 30 minutes (default is 10
minutes):
Ohio
CLE – Cleveland
CMH – Columbus
Wyoming
CPR – Casper
1.
The snooze time (in minutes) digit will be flashing. Use the CH/ + key to set the
snooze time (in minutes). Each pressing of the key will increase the snooze time by 5
minutes. The snooze can also be set OFF when the “OFF” digit is being displayed.
Confirm with the SET key and enter the “ºF/ºC temperature unit setting” or exit the
manual setting mode by pressing the SNOOZE/ SUN key.
2.
The Canadian cities are displayed as follows:
Note:
Code – City
Code – City
Code – City
If the snooze time has been set “OFF”, the snooze function will not be activated.
ALB – Calgary
OTT – Ottawa
QUE – Quebec
TOR – Toronto
Van – Vancouver
WIN – Winnipeg
29
30
Flashing
°F/°C TEMPERATURE UNIT SETTING
pm
Flashing
Flashing
The default temperature reading is set to °F (degree Fahrenheit). To select °C (degree
Celsius):
1.
2.
The “°F” will be flashing, use the CH/ + key to toggle between “°F” and “°C”.
Once the desired temperature unit has been chosen, confirm with the SET key and
enter the “Weather Forecast Icon Sensitivity setting” or exit the setting mode by
pressing the SNOOZE/ SUN key.
WEATHER FORECASTING ICON SENSITIVITY SETTING
For locations with rapid changes of weather conditions, the threshold can be set to a
different level for faster display of changing weather conditions.
1.
2.
The current sensitivity value will start flashing.
Using the CH/ + key to set the weather sensitivity level. There are 3 levels of setting:
1, 2 and 3; level 1 is the most sensitive setting, level 3 is the least sensitive setting
(default setting is "2").
3.
Confirm with the SET key and exit the Manual settings.
31
32
Download from Www.Somanuals.com. All Manuals Search And Download.
ALARM SETTING:
SNOOZE SETTING AND STOPPING THE ALARM:
Alarm icon flashing
1.
When the alarm is sounding, press the SNOOZE/ SUN key to activate the snooze
function. The alarm will stop and re-activate after the time interval of the snooze time
pre-set by user.
2.
To stop the alarm completely, press any keys other than the SNOOZE/ SUN key.
WEATHER FORECAST AND TENDENCY:
Flashing
The weather forecast icons (Weather girl):
One of the 15 different weather icons (featured by Weather girl with different clothing) is
displayed in the centre of LCD, which indicates the different forecast weather condition due
to air pressure level (Sunny, Sunny + Cloudy or Cloudy + Rainy) and the current outdoor
temperature (Temperature value detected by Channel 1):
To set alarm:
1.
2.
Press and hold ALM for about 3 seconds until the alarm time display flashes.
The hour digit and the alarm icon will be flashing. Press the CH/ + key to adjust the
hour.
78.8F
66.2 – 78.6F
50 – 66F
32 – 49.8F
< 32F
3.
Press ALM button once and minute digit will be flashing. User shall then press CH/ +
button to set the minute.
4.
5.
Press ALM button once to confirm the setting.
To activate/ deactivate the alarm function, press the ALM button once. The display of
the alarm icon represents that the alarm is "ON".
Sunny
Note: The duration of alarm sounding is 120 seconds
33
34
For every sudden or significant change in the air pressure, the weather icons will update
accordingly to represent the change in weather. If the icons do not change, then it means
either the air pressure has not changed or the change has been too slow for the Weather
Station to register. However, if the icon displayed is a sun or raining cloud, there will be no
change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon)
since the icons are already at their extremes.
78.8F
66.2 – 78.6F
50 – 66F
32 – 49.8F
< 32F
Sunny +
Cloudy
The icons displayed forecasts the weather in terms of getting better or worse and not
necessarily sunny or rainy as each icon indicates. For example, if the current weather is
cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it
is not raining. It simply means that the air pressure has dropped and the weather is expected
to get worse but not necessarily rainy.
Note: After setting up, readings for weather forecasts should be disregarded for the next 48-
60 hours. This will allow sufficient time for the Weather Station to collect air pressure data at
a constant altitude and therefore result in a more accurate forecast.
78.8F
66.2 – 78.6F
50 – 66F
32 – 49.8F
< 32F
Cloudy +
Rainy
Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather
forecasting feature is estimated to have an accuracy level of about 75% due to the varying
areas the Weather Station has been designed for use in. In areas that experience sudden
changes in weather (for example from sunny to rain), the Weather Station will be more
accurate compared to use in areas where the weather is stagnant most of the time (for
example mostly sunny).
35
36
Download from Www.Somanuals.com. All Manuals Search And Download.
If the Weather Station is moved to another location significantly higher or lower than its initial
standing point (for example from the ground floor to the upper floors of a house), remove the
batteries and re-insert them after about 30 seconds. By doing this, the Weather Station will
not mistake the new location as being a possible change in air-pressure when really it is due
to the slight change of altitude. Again, disregard weather forecasts for the next 48-60 hours
as this will allow time for operation at a constant altitude.
DISPLAY OF TEMPERATURE AND HUMIDITY READINGS:
INDOOR TEMPERATURE
The indoor temperature and humidity are measured automatically and displayed on the
fourth section of the LCD.
Indoor
Temperature
in °F
THE WEATHER TENDENCY INDICATOR
Indoor Relative
Humidity %
Working together with the weather icons are the weather tendency indicators (the upward
and downward arrow located near the Weather girl). When the indicator points upwards, it
means that the air-pressure is increasing and the weather is expected to improve, but when
indicator points downwards, the air-pressure is dropping and the weather is expected to
become worse.
OUTDOOR TEMPERATURE:
The last LCD section shows the outdoor temperature, a reception symbol and a channel
Therefore, user may see how the weather has changed and is expected to change. For
example, if the indicator is pointing downwards together with cloudy icons, it means that the
last noticeable change in the weather was when it was sunny (the sunny icon only).
Therefore, the next change in the weather will be the cloudy icons since the indicator is
pointing downwards.
number under the temperature will also show if more than one transmitter has been used.
Outdoor
Reception
Symbol
Outdoor temperature
in F
Note: Once the weather tendency indicator has registered a change in air pressure, it will
remain permanently visualized on the LCD.
Maximum icon
Transmitter Identification No. (only shown
when more than one transmitter is used)
37
38
DISPLAY OF INDOOR MAXIMUM AND MINIMUM RECORDS:
RESETTING THE OUTDOOR MAXIMUM/ MINIMUM RECORDS
Note: It is required to reset the outdoor MAX/MIN temperature records of different channels
separately.
1.
In normal display mode, press the MIN/ MAX button three times. The maximum indoor
temperature and humidity will be shown. Also the date and time of recording this
temperature will be displayed.
1.
In normal display mode, press the CH/ + button to select a channel (1, 2 or 3). The
channel ID will be displayed above the outdoor temperature reading.
2.
Press the MIN/ MAX button once more to display the minimum indoor temperature
and humidity. Also the date and time of recording this temperature will be displayed.
Note: The transmitter number will only be displayed if more than one transmitter is applied.
RESETTING THE INDOOR MAXIMUM/ MINIMUM RECORDS
2.
3.
Press the MIN/ MAX button once. The max icon will be displayed.
Press and hold the SET button for about 3 seconds; this will reset all outdoor
minimum and maximum temperature recorded to the current time, date and
temperature.
1.
In normal display mode, press the MIN/ MAX button to advance to the MIN/ MAX
display.
2.
Press and hold the SET key for about 3 seconds; this will reset all indoor minimum
and maximum data recorded to the current time, date, temperature and humidity. The
max/ min temperature of the currently selected outdoor channel will also be reset at
the same time.
Note: The max/ min temperature records of the indoor channel will also be reset at the same
time.
DISPLAY OF OUTDOOR MAXIMUM AND MINIMUM RECORDS:
SUNRISE/ SUNSET/ SUN DURATION TIME:
1.
2.
3.
In normal display mode, press the CH/ + button to select the desired channel. The
channel ID will be displayed above the outdoor temperature reading.
Press the MIN/MAX button, the max temperature of the selected channel will be
displayed. Also the date and time of recording this temperature will be displayed.
Press the MIN/MAX button once more, the min temperature of the selected channel
will be shown. Press the ALM button to go back to the normal display mode.
Sunrise time/ Sunset
time/ Sun duration time
Sunrise/ sunset
display
Short form of City
name (For example,
JFK - New York)
39
40
Download from Www.Somanuals.com. All Manuals Search And Download.
THE MOON PHASE
Press the SNOOZE/ SUN key to toggle between the sunrise, sunset, and sun duration time:
The Moon icon of the Weather Station will also display 12 different Moon phases according
to the set calendar.
Sunrise time
Sunrise icon
Note: In the southern hemisphere, the phases of the moon are same but the shape of the
moon is mirror inverted.
Sunrise time
Sunset time
Sunset icon
Large Waning Small Waning
Full Moon
New Moon
Last Quarter
First Quarter
Large Waning Small Waning
Crescent Crescent
Gibbous
Gibbous
Sunset time
Small Waxing Large Waxing
Gibbous
Small Waxing
Crescent
Large Waxing
Crescent
Gibbous
Sun duration time (total number of hours of sunlight on the day)
Sun duration
time icon
LED BACK-LIGHT
Sun duration time
(hh:mm)
The LED back-light will be automatically switched ON when any key is pressed. The LED
back-light will be switched on for approximately 9 seconds before automatically switching
OFF.
41
42
The transmission range is about 330 feet (100 m) from the transmitter to the Weather
Station (in open space). However, this depends on the surrounding environment and
interference levels. If no reception is possible despite the observation of these factors, all
system units have to be reset (see Setting up).
TEMPERATURE TRANSMITTER:
The range of the Temperature transmitter may be affected by the temperature. At cold
temperatures the transmitting distance may be decreased. Please bear this in mind when
placing the transmitter.
915 MHz RECEPTION
Note: Sensor must be outside to transmit outdoor temperature. The sensor reads data from
If the outdoor temperature data is not being received within 5 minutes after setting up (the
display shows ‘’ - -. - F’’ on the outdoor section for a long time during normal operation) please
check the following items:
the environment it is currently in.
1.
2.
3.
The distance of the Weather Station or transmitter should be at least 5 to 6.5 feet
away from any interfering sources such as computer monitors or TV sets.
Avoid positioning the Weather Station onto or in the immediate proximity of metal
window frames.
Using other electrical products such as headphones or speakers operating on the
same signal frequency (915MHz) may prevent correct signal transmission and
reception.
POSITIONING
TEMPERATURE TRANSMITTER:
The Transmitter is supplied with a holder that may be attached to a
wall with the two screws supplied. The Transmitter can also be
position on a flat surface by securing the stand to the bottom to the
Transmitter.
4.
Neighbors using electrical devices operating on the 915MHz signal frequency can also
cause interference.
Note: When the 915MHz signal is received correctly, do not re-open the battery cover of
either the transmitter or Weather Station, as the batteries may spring free from the contacts
and force a false reset. Should this happen accidentally then reset all units (see Setting up
above) otherwise transmission problems may occur.
43
44
Download from Www.Somanuals.com. All Manuals Search And Download.
To wall mount:
CARE AND MAINTENANCE:
1. Secure the bracket onto a desired wall using the screws and plastic
anchors.
2. Clip the remote temperature sensor onto the bracket.
Extreme temperatures, vibration and shock should be avoided as these may cause
damage to the unit and give inaccurate forecasts and readings.
Precautions shall be taken when handling the batteries. Injuries, burns, or property
damage may be resulted if the batteries are in contact with conducting materials, heat,
corrosive materials or explosives. The batteries shall be taken out from the unit before
the product is to be stored for a long period of time.
Note:
Before permanently fixing the transmitter wall base, place all units in the
desired locations to check that the outdoor temperature reading is
receivable. In event that the signal is not received, relocate the
transmitters or move them slightly as this may help the signal reception.
Immediately remove all low powered batteries to avoid leakage and damage. Replace
only with new batteries of the recommended type.
When cleaning the display and casings, use a soft damp cloth only. Do not use
solvents or scouring agents as they may mark the LCD and casings.
Do not submerge the unit in water.
POSITIONING THE WEATHER STATION:
Special care shall be taken when handling a damaged LCD display. The liquid crystals
can be harmful to user's health.
The Weather Station comes complete with a foldout stand that gives the
option of table standing or wall mounting.
Do not make any repair attempts to the unit. Return them to their original point of
purchase for repair by a qualified engineer. Opening and tampering with the unit may
invalidate their guarantee.
To wall mount:
1.
Fix a screw into the desired wall, leaving the head extended out
Never touch the exposed electronic circuit of the device as there is a danger of electric
shock should it becomes exposed.
Do not expose the units to extreme and sudden temperature changes, this may lead
to rapid changes in forecasts and readings and thereby reduce their accuracy.
about 0.2” (5mm).
Using the Weather Station’s hanging hole, carefully hang it onto the
screw.
2.
Note: Always ensures that the unit locks onto the screw head before
releasing.
45
46
SPECIFICATIONS:
Temperature measuring range:
LIABILITY DISCLAIMER
The manufacturer and supplier cannot accept any responsibility for any incorrect
readings and any consequences that occur should an inaccurate reading take place.
This product is not to be used for medical purposes or for public information.
This product is only designed to be used in the home as indication of the future
weather and is not 100% accurate. Weather forecasts given by this product should be
taken as an indication and not as being totally accurate.
Indoor
:
14.1°F to +139.8°F with 0.2°F resolution (-9.9ºC to +59.9ºC with 0.1ºC
resolution, “OF.L” displayed if outside this range)
Outdoor
:
-39.8°F to +139.8°F with 0.2°F resolution, (-39.9ºC to +59.9ºC with 0.1ºC
resolution, “OF.L” displayed if outside this range)
Relative humidity measuring range:
Indoor
:
1% to 99% with 1% resolution (displays “- -” when lower than 1 %; displays
"99" % if higher than 99 %)
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written consent of the
manufacturer.
Indoor temperature checking interval : every 15 seconds
Indoor humidity checking interval
Outdoor temperature reception
Transmission range
:
:
every 20 seconds
every 4 seconds
:
up to 330 feet (100 meters) in open air
WARRANTY INFORMATION
La Crosse Technology ®, Ltd provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
Power consumption:
Weather Station
Temperature transmitter
Battery life cycle (Alkaline batteries recommended)
Weather station
Temperature transmitter
:
:
2 x AA, IEC, LR6, 1.5V
2 x AA, IEC, LR6, 1.5V
This limited warranty begins on the original date of purchase, is valid only on products
purchased and used in North America and only to the original purchaser of this product. To
receive warranty service, the purchaser must contact La Crosse Technology ®, Ltd for
problem determination and service procedures. Warranty service can only be performed by
a La Crosse Technology ®, Ltd authorized service center. The original dated bill of sale must
be presented upon request as proof of purchase to La Crosse Technology ®, Ltd or La
Crosse Technology ®, Ltd’s authorized service center.
:
:
Approximately 24 months
Approximately 24 months
Dimensions (H x L x D)
Weather Station
Temperature transmitter
:
:
3.64 x 4.89 x 1.12 inches (92.5 x 124.3 x 28.4 mm)
5.05 x 0.83 x 1.50 inches (128.3 x 38.2 x 21.2 mm)
47
48
Download from Www.Somanuals.com. All Manuals Search And Download.
La Crosse Technology ®, Ltd will repair or replace this product, at our option and at no
charge as stipulated herein, with new or reconditioned parts or products if found to be
defective during the limited warranty period specified above. All replaced parts and products
become the property of La Crosse Technology ®, Ltd and must be returned to La Crosse
Technology ®, Ltd. Replacement parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer. La Crosse Technology ®, Ltd will pay all
expenses for labor and materials for all repairs covered by this warranty. If necessary repairs
are not covered by this warranty, or if a product is examined which is not in need or repair,
you will be charged for the repairs or examination. The owner must pay any shipping
charges incurred in getting your La Crosse Technology ®, Ltd product to a La Crosse
Technology ®, Ltd authorized service center. La Crosse Technology ®, Ltd will pay ground
return shipping charges to the owner of the product to a USA address only.
installation, normal set-up or adjustments, claims based on misrepresentation by the seller
or performance variations resulting from installation-related circumstances.
LA CROSSE TECHNOLOGY ®, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE
OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE
USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS
NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to your
State. Some States do no allow the exclusion of consequential or incidental damages
therefore the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
Your La Crosse Technology ®, Ltd warranty covers all defects in material and workmanship
with the following specified exceptions: (1) damage caused by accident, unreasonable use
or neglect (including the lack of reasonable and necessary maintenance); (2) damage
occurring during shipment (claims must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4) damage resulting from failure to
follow instructions contained in your owner’s manual; (5) damage resulting from the
performance of repairs or alterations by someone other than an authorized La Crosse
Technology ®, Ltd authorized service center; (6) units used for other than home use (7)
applications and uses that this product was not intended or (8) the products inability to
receive a signal due to any source of interference.. This warranty covers only actual defects
within the product itself, and does not cover the cost of installation or removal from a fixed
La Crosse Technology ®, Ltd
2809 Losey Blvd. South
La Crosse, WI 54601
Phone: 608.782.1610
Fax: 608.796.1020
To contact Customer Support / Warranty work by email
49
50
FCC DISCLAIMER
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1)
(2)
This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or
duplicated or processed using electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is
regularly checked and corrections made in the next issue. We accept no liability for technical
mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
|