PRINTED MATERIALS CONTENTS:
4. Printed Product Overview Guide (this document)
IMPORTANT: Product set up and activation
5. IMPORTANT: Activation Key Card required for
set up and activation. Do not throw away.
PRODUCT OVERVIEW GUIDE
WIRELESS REMOTE WATER DETECTOR
ADD ON SENSOR WITH EARLY WARNING ALERTS
Model: D013.105.M3
ADDITIONAL EQUIPMENT (NOT INCLUDED)
• Two fresh AAA, IEC LR03, 1.5V Alkaline batteries
• Two-sided tape as needed
• Browser with high speed Internet
• Network router
IMPORTANT:
• Existing La Crosse Alerts Internet Gateway with mounting
bracket, AC adapter and LAN cable (sold separately)
This document provides general product information and
complete product set up and activation instructions.
FEATURES AND MEASUREMENTS (Diagram 1)
choose model TX71U-IT on the website to begin the set up
process with step-by-step instructions. Enter the key from the
ACTIVATION KEY CARD (included in the package) when
prompted by the website.
(B)
(A)
This socket is ONLY
for the water sensor.
DO NOT insert
**H2O sensor
with 6-foot
wire to plug
LCD
LED
power plug into it.
into sensor
Need help? Visit:
Button
GENERAL USE AND APPLICATIONS
Use your smartphone, tablet or computer to monitor for water
leaks that could lead to frozen pipes and mold growth.* Water
damage can originate in almost any room: frozen pipes, broken
pipes, broken dishwasher hose or leakage, washing machine
overflow, leaking roof, basement leaks, foundation cracks,
plumbing leaks, sump pump overflow and leaks from bad
weather such as snow, rain or floods.* The good news is that
water damage is a costly problem that you can prevent: Simply
connect the gateway to your network router to enable remote
monitoring with text and e-mail alerts from anywhere with
Internet access.*
(A) Wireless Remote Water Detector:
•
•
LCD displays water status: WET (H20) or DRY
Transmits collected data to your Internet Gateway
(not included) within a 200 Ft. wireless range.
•
Weather resistant case (not water proof)
Note: The case with LCD cannot get wet and may
be affected by high humidity conditions.
•
Wall hanging or free standing
(B) H20 Water Sensor on 6 Ft. Detachable Cable:
Wall-mount the water detector, or use tabletop bracket/stand,
and place the H2O sensor on the floor to monitor the area for
water.* Alerts are sent if water is detected, if the batteries are
low or if the connection is lost.*
•
•
H20 sensor detects the presence or absence of water
**Attach it to the water detector case and place the
sensor on the floor or other area you wish to monitor
for WET/DRY conditions.
MONITORING OPTIONS
•
**The official D000.105 H20 Sensor can be plugged
into the sensor at any time without resetting.
•
•
•
•
•
•
Home, second home, office or rental property
Kitchens, baths, laundry & pool rooms
Utility sinks, sumps & water heaters
Basements, garages & attics
Near aquariums & terrariums
Greenhouses & farms
HOW IT WORKS
•
•
The wireless sensor transmits data to the Internet
Gateway (not included) within a 200 Ft. (60.96m) range.*
PACKAGE CONTENTS
The Internet Gateway (not included) connects to your
existing network router and uses your high-speed Internet
connection to upload collected measurements to your own
Once the sensor is activated with the Internet Gateway
(not included), you monitor sensor(s) from a smartphone,
up custom e-mail/text alerts*.
HARDWARE CONTENTS:
1. Wireless remote water
detector with mounting
(1)
(2)
•
•
bracket (TX71U-IT)
2. H20 (water) sensor on 6 Ft.
detachable cable (D000.105)
that detects WET (H20) or DRY
(DRY) conditions.
Add up to 5 sensors (sold separately) per Internet gateway
(not included) to monitor additional areas.
3. Screws and drywall anchors
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
IMPORTANT SETUP & OPERATION NOTES
Transmission range:
200 feet (60.96 m) in open space
• The sensor has a wireless range of 200 feet (60.96 m). The
200 ft. range equates to open air with no obstructions, and
that radio waves DO NOT curve around objects. Actual
transmission range will vary depending on what is in the path
of the signal. Each obstruction (roof, walls, floors, ceilings,
etc.) will effectively cut signal range in half.
• Metal, stucco, and some types of glass can reduce signal
range by as much as ¾ or more, compared to the ½
reduction typical of most obstructions. It is possible to
receive a signal through these materials, however maximum
range will be reduced due to their tendency to absorb or
reflect a much larger portion of the sensor’s signal.
• The Wireless Remote Water Detector updates the water
status on the LCD every 6 seconds.
Water status (H20/DRY):
6 ft. detachable water sensor cable
detects wet (H20) and dry (DRY)
conditions. Displays last reading on
LCD if probe is not connected.
Sensor battery power
Battery life cycle:
2 x AAA Alkaline, IEC LR03, 1.5V
Approximately 24 months
TX71U-IT size:
5.23" H x 0.76" W x 1.44" D
D000.105 H20 Sensor size .26” H x 1.77" W x 1.17" D
WARRANTY INFORMATION
Note: The new measurement is reported to your account at
intervals that you select using your online account.
La Crosse Technology, Ltd provides a 1-year limited warranty
on this product against manufacturing defects in materials and
workmanship.
This limited warranty begins on the original date of purchase, is
valid only on products purchased and used in North America
and only to the original purchaser of this product. To receive
warranty service, the purchaser must contact La Crosse
Technology, Ltd for problem determination and service
procedures. Warranty service can only be performed by a La
Crosse Technology, Ltd authorized service center. The
original dated bill of sale must be presented upon request as
proof of purchase to La Crosse Technology, Ltd or La Crosse
Technology, Ltd’s authorized service center.
BATTERY REPLACEMENT
1. Remove the battery cover by sliding the cover down.
2. Observing the correct polarity install 2-AAA batteries.
Batteries will fit tightly. Avoid start-up problems by
making sure the batteries do not spring free.
3. Do not mix old and new batteries.
4. Do not mix alkaline, lithium, standard or rechargeable
batteries.
5. Replace the battery cover by sliding upwards and check that
it is securely fitted.
La Crosse Technology, Ltd will repair or replace this product,
at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during
the limited warranty period specified above. All replaced parts
and products become the property of La Crosse Technology,
Ltd and must be returned to La Crosse Technology, Ltd.
Replacement parts and products assume the remaining
original warranty, or ninety (90) days, whichever is longer. La
Crosse Technology, Ltd will pay all expenses for labor and
materials for all repairs covered by this warranty. If necessary
repairs are not covered by this warranty, or if a product is
examined which is not in need or repair, you will be charged for
the repairs or examination. The owner must pay any shipping
charges incurred in getting your La Crosse Technology, Ltd
product to a La Crosse Technology, Ltd authorized service
center. La Crosse Technology, Ltd will pay ground return
shipping charges to the owner of the product to a USA address
only.
LOW BATTERY INDICATOR
• Low battery icon appears on LCD when batteries are low.
• You will receive an e-mail or mobile text message alert when
the battery power of the sensor is low. Change the batteries
immediately.
Note: The LED light turns ON briefly after changing batteries.
The LED light turns OFF when not needed to save battery
power. The previously stored information in the sensor will not
be affected or cancelled while you change the batteries.
MAINTENANCE AND CARE
• Avoid extreme temperatures, vibration and shock.
• Clean the sensor with a soft, damp cloth.
Do not use solvents or scouring agents.
• Do not submerge the sensor case in water.
• Do not kink the 6 ft. sensor cable.
• Secure the 6 ft. cable to avoid tripping hazards.
• Immediately remove all low powered batteries to avoid
leakage and damage.
• Opening the casings invalidates the warranty. Do not try to
repair the unit. Contact La Crosse Technology® for repairs.
Your La Crosse Technology, Ltd warranty covers all defects in
material and workmanship with the following specified
exceptions: (1) damage caused by accident, unreasonable use
or neglect (including the lack of reasonable and necessary
maintenance); (2) damage occurring during shipment (claims
must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4)
damage resulting from failure to follow instructions contained in
your owner’s manual; (5) damage resulting from the
performance of repairs or alterations by someone other than
an authorized La Crosse Technology, Ltd authorized service
center; (6) units used for other than home use (7) applications
and uses that this product was not intended or (8) the products
inability to receive a signal due to any source of interference..
This warranty covers only actual defects within the product
itself, and does not cover the cost of installation or removal
from a fixed installation, normal set-up or adjustments, claims
based on misrepresentation by the seller or performance
variations resulting from installation-related circumstances.
Download from Www.Somanuals.com. All Manuals Search And Download.
PROTECTED UNDER US PATENTS:
5,978,738 6,076,044 6,597,990
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME
LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE
OPERATION OR MALFUNCTION OF THIS PRODUCT.
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL
PURPOSES OR FOR PUBLIC INFORMATION. THIS
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S
REACH.
This warranty gives you specific legal rights. You may also
have other rights specific to your State. Some States do not
allow the exclusion of consequential or incidental damages
therefore the above exclusion of limitation may not apply to
you. For warranty work, technical support, or information,
please contact:
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received,
including interference that may cause undesired operation.
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Printed in China
Lost your Activation Key Card?
Contact Customer Support:
Phone: (608) 785-7920
LA CROSSE ALERTS™ PRODUCTS
For online product information:
DISCLAIMERS
* Disclaimers: La Crosse Technology, LTD. (“La Crosse”)
provides various alert and monitoring services to aid users.
(1) Service providers may charge users for alert services.
Standard messaging and data rates apply and will be billed to
the customer’s wireless account. Customers may be unable to
receive text messaging or data service in some areas due to
unavailability of service. (2) La Crosse shall not be liable for
accuracy, usefulness or availability of data transmitted via the
service. Users are solely responsible for damages to persons
or property by service use.
All rights reserved. This handbook must not be reproduced in
any form, even in excerpts, or duplicated or processed using
electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The
information in this handbook is regularly checked and
corrections made in the next issue.
We accept no liability for technical mistakes or printing errors,
or their consequences. All trademarks and patents are
acknowledged.
Download from Www.Somanuals.com. All Manuals Search And Download.
|