Model: S88907
Instruction Manual
DC: 072314
WIRELESS COLOR WEATHER STATION
SIDE BUTTONS
FRONT
VIEW
Time
Calendar +
Alarm
Color Animated
Forecast +
Tendency
Remote
Humidity &
Temperature
with Trend
Indoor
Humidity &
Temperature
with Trend
Indoor
Comfort
Indicator
IN/OUT
Temperature
Alerts
FRONT BUTTONS
REMOTE
SENSOR
TX141TH-Bv2
Wall
Hanging
Holes
BACK
VIEW
LED
Battery
Compartment
3 “AAA”
TX
AC Power
Jack
DC 5.0V
GPU280500150WD00
Sensor
Battery
Cover
Sensor Battery
Compartment
2 “AA”
Stand
Model: S88907
Page | 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Deactivate Alarm.......................................................................................................................................... 9
Snooze............................................................................................................................................................ 9
Adjust Backlight (HI-LOW-OFF)......................................................................................................... 9
Indoor Comfort Indicator...................................................................................................................... 9
Heat Index/Dew Point ......................................................................................................................... 10
Heat Index ................................................................................................................................................... 10
Dew Point Temperature............................................................................................................................. 10
Temperature/Humidity Trend indicators...................................................................................... 10
Search for Remote Sensor .................................................................................................................. 11
MIN/MAX (View, Reset) ...................................................................................................................... 11
Animated Color Forecast Icons......................................................................................................... 11
Pressure Tendency Indicators (Up, Right, Down Arrows) .................................................... 12
Manual WWVB Time Signal Search.................................................................................................. 12
Remote Sensor Positioning and Use............................................................................................... 12
Low Battery icon..................................................................................................................................... 12
Care and Maintenance .......................................................................................................................... 12
Specifications........................................................................................................................................... 13
Warranty Information .......................................................................................................................... 13
FCC Statement ......................................................................................................................................... 14
Model: S88907
Page | 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
La Crosse Technology® introduces a Wireless Color Weather Station with precise, real-
time backyard weather. Animated color forecasts with trends react to changing
barometric pressure. Indoor comfort indicator can help achieve a comfortable and
healthy living environment and may even save you heating costs. Monitor in/out
temperature trends with high and low alert settings. Measure in/out temperature and
humidity with daily min/max records -- all on one easy-to-read color display with
adjustable brightness.
Features
12/24 hr. atomic time (manual setting)
Signal strength icon for sensor transmission
Indoor and Remote humidity (%RH) with trend indicator
Indoor and Remote temperature (°F / °C) with trend
Animated forecast icons
Forecast tendency indicator
Customize Indoor and Remote temp. alerts (low / high) for weather station and
remote sensor
Perpetual calendar (day / month / date / year)
Back light control (high / low / off)
Time alarm
Heat index and dew point
Min. / max. temperature and humidity
Indoor comfort indicator
Station and sensor low battery icon
Atomic reception indicator
Snooze / alarm icon
Detailed Setup: Weather Station and Remote Sensor
STEP 1:
Insert the 5-volt A/C power adapter into the designated area
on the back of the weather station.
Plug the A/C power adapter into a wall outlet for continuous
backlight (ON/OFF), and dimmer feature.
STEP 2: (optional battery operation)
Slide tab to down and pull out to remove the battery cover.
Insert three new AAA Alkaline batteries into the back of the weather
station. Observe the correct polarity (see marking inside the battery
compartment).
The weather station will light up and show indoor temperature, humidity and
time.
(Backlight will illuminate for 8 seconds when using only battery power with a
press/release of the SNOOZE/LIGHT button)
Model: S88907
Page | 4
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3:
Ensure that the transmitter is within 10 feet of the weather station.
Remove battery cover from transmitter. Slide the battery cover down
and lift off the front.
Insert two new AA batteries into the TX141TH-Bv2 transmitter.
Observe the correct polarity.
Within three minutes, the Weather station will show readings in the
remote temperature area on the LCD.
Note: Use Alkaline batteries (or Lithium for temperatures below -20°F/-
28.8°C).
Button Functions
The weather station
has 5 buttons up the
right side and 2
buttons on the front.
▼ (Down) Button
Setting-
Press to decrease values during setting.
Hold 2 seconds to quickly adjust values.
Default Time Display-
Press to display minimum temperature/humidity.
Hold 2 seconds to clear minimum temperature/humidity memory.
Temperature Alert-
Press to disarm alerts
TIME SET Button
Default Time Display-
Press to start or stop a WWVB time signal search
Hold for 3 seconds to set time/calendar, etc.
SNOOZE/LIGHT (HI-LOW-OFF) Button
Default Time Display-
Press to change the LCD backlight brightness. HI/LOW/OFF
Press to activate backlight for 10 seconds.(without adaptor)
Time Alarm-
Press to activate the snooze function when alarming
HEAT/DEW/SENSOR SEARCH button
Default Time Display-
Press once to view Heat Index.
Press twice to view Dew Point.
Hold to search for Remote sensor.
Model: S88907
Page | 5
Download from Www.Somanuals.com. All Manuals Search And Download.
▲ (UP) Button
Setting-
Press to increase the values during setting.
Hold 2 seconds to quickly adjust values.
Default Time Display-
Press to view maximum temperature/humidity.
Hold 2 seconds to clear maximum temperature/humidity memory.
Temperature Alert-
Press to arm alerts
ALERT Button
Default Time Display-
Press to toggle between Remote High Alert, Remote Low Alert, Indoor High Alert and
Indoor Low Alert.
Hold to enter Alert setting
ALARM Button
Default Time Display-
Press once to show alarm time
Hold for 2 seconds enter alarm setting mode
Alarm Mode-
Press to activate or deactivate time alarm.
Set Time, Date, Temperature Unit
Hold the TIME SET button to enter time set mode.
1. Press the ▼ or ▲ buttons to adjust the values.
2. Hold the ▼ or ▲ buttons to quickly adjust the values.
3. Press the TIME SET button to confirm adjustments and move to the
next item.
Time Set Order:
1. WWVB time signal (On/Off)
2. Time Zone - 7 time zones
3. DST (Daylight Saving Time On/Off)
4. 12/24 hour time format
5. Hour
6. Minutes
7. Year
8. Month
9. Date
10.Fahrenheit/Celsius
Press the TIME SET button to exit, or wait 20 seconds without pressing buttons to
return to the normal time display.
Model: S88907
Page | 6
Download from Www.Somanuals.com. All Manuals Search And Download.
WWVB Reception ON/OFF
The WWVB atomic time reception defaults to ON.
To turn the WWVB reception OFF:
1. Hold the TIME SET button for 5 seconds.
2. WWVB and ON will flash above the date.
3. Press and release the ▼ or ▲ buttons to turn this OFF if you do not
ON
WWVB
want to receive the WWVB time signal.
4. Confirm with the TIME SET button and move to the Time Zone.
Time Zone
This station offers seven time zones listed in letter format (default is EST):
AST Atlantic Time
EST
EST Eastern Time
CST Central Time
MST Mountain Time
PST Pacific Time
AKT Alaskan Time
HAT Hawaiian Time
1. EST will flash above the date.
2. Press and release the ▼ or ▲ buttons to select a different Time Zone.
3. Confirm with the TIME SET button and move to Daylight Saving Indicator.
Daylight Saving Time Indicator
DST will default to the ON position as most of the country observes the DST change. If
you live in an area does not observe the DST change, switch this to the OFF position.
1. DST and ON will flash above the date.
2. Press and release the ▼ or ▲ buttons to turn DST to OFF.
3. Confirm with the TIME SET button and move to 12/24 hour time format.
ON
DST
12-hour or 24-hour Time Format
The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.
Note: When in 12-hour format AM or PM will show in front of the hour.
1. 12H will flash in the time display.
2. Press and release the ▼ or ▲ buttons to select 24-hour time.
3. Confirm with the TIME SET button and move to Set Time.
12H
Set Time
To set the time manually:
1. The hour digit will flash.
2. Press and release the ▼ or ▲ buttons to select the hour.
3. Press and release the TIME SET button to set the minutes.
4. The minute’s digit will flash.
5. Press and release the ▼ or ▲ buttons to select the minutes.
6. Confirm with the TIME SET button and move to Set Calendar.
Model: S88907
Page | 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Calendar
The date default of the weather station is 1. 1. 2014.
To set the calendar:
1. The year will flash.
2. Press and release the ▼ or ▲ buttons to set the year (between years 2000-
2039).
3. Press the TIME SET button again to confirm and to enter the month setting.
4. The month will flash.
5. Press and release the ▼ or ▲ buttons to set the month.
6. Press the TIME SET button again to confirm and enter the date setting.
7. The date will flash.
8. Press and release the ▼ or ▲ buttons to set the date.
9. Confirm all calendar settings with the TIME SET button to confirm and move to select
Fahrenheit/Celsius.
Note: The day of the week will set automatically once the year, month and date are set.
Fahrenheit/Celsius
1. °F will flash.
2. Press and release the ▼ or ▲ buttons to select Fahrenheit or Celsius.
3. Confirm with the TIME SET button and exit the program menu.
Temperature Alerts
The weather station offers programmable high and low temperature alerts.
Hold the ALERT button for five seconds, until the weather station beeps, to
select and set temperature alert values. Each alert value will flash
separately during alert set mode.
REMOTE HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert
value, and press the ALERT button to confirm. Then press the ALERT button again
switch to REMOTE LOW setting.
REMOTE LOW alert will flash. Press the ▼ or ▲ buttons to set the alert value, and
press the ALERT button to confirm. Then press the ALERT button again switch to
INDOOR HIGH setting.
INDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert value, and
press the ALERT button to confirm. Then press the ALERT button again switch to
INDOOR LOW setting.
INDOOR LOW alert will flash. Press the ▼ or ▲ buttons to choose the value, and
press the ALERT button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn individual alerts
ON or OFF.
Arm/Disarm Temperature Alerts
In normal time mode, press and release the ALERT button to toggle between:
o
o
o
o
Remote HI
Remote Lo
Indoor HI
Indoor LO
Model: S88907
Page | 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the ▲ button to arm the selected alert.
The alert bell appears when each alarm is activated.
Press the ▼ button to disarm the selected alert.
OFF will show in the Alerts area if no alert is active.
Temperature Alert Sounds
When temperature alert sounds, the corresponding alert bell will flash.
The alert beeps once every minute, until the temperature is out of alert range.
Press any button to stop alert. The alert bell will still show.
Disarm Alert: In normal mode, hold and release the ALERT button to select the alert
to disarm. With HI or LO alert selected, press the ▼ button disarm alert.
Time Alarm Set
Hold the ALARM button for 5 seconds to enter the alarm time set mode.
1. The alarm hour digit will flash in the time display.
2. Press and release the ▼ or ▲ buttons to select the hour.
3. Press and release the ALARM button to set the minutes. The minute
digits will flash.
4. Press and release the ▼ or ▲ buttons to select the minutes.
5. Confirm with the ALARM button and exit.
6. The bell icon will show indicating the alarm is active.
7. The bell icon will flash when the alarm is sounding.
Deactivate Alarm
1. Press and release the ALARM button once to show alarm time.
2. Press and release the ALARM button to deactivate the Alarm.
3. The bell icon will disappear indicating the alarm is no longer active.
Snooze
1. When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm
for 10 minutes. The snooze icon Zz will flash by the weekday when the snooze
feature is active.
2. To stop alarm for one day, press ALARM button, while in snooze mode. The bell icon
will remain solid.
Note: When the alarm sounds, it continues for 2 minutes then shuts off completely.
Adjust Backlight (HI-LOW-OFF)
When using A/C power:
Press the HI/LOW/OFF button to adjust the backlight:
When using Battery power only:
Press the HI/LOW/OFF button for 10 second backlight.
Indoor Comfort Indicator
The indoor comfort display is based off of the indoor humidity read by the weather
station. Air that is too dry or too wet can cause discomfort. The weather station will
display one of five indicators:
Model: S88907
Page | 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Status
Indicator
Color
Too Humid
Humid
Good
First Arrow
Second Arrow
Third Arrow
Fourth Arrow
Fifth Arrow
Blue
Blue
Green
Orange
Orange
Dry
Too Dry
Heat Index/Dew Point
The HEAT/DEW button toggles between Heat Index, Dew Point, and Mold Risk.
Each feature will display for 10 seconds then return to default display if the
button is not pressed again.
Heat Index
Heat Index combines the effects of heat and humidity. It is the apparent temperature of
how hot it feels to a human being. As humidity increases, the body is unable to cool
effectively; therefore, the temperature will feel warmer.
View Heat Index: From a normal display, press the HEAT/DEW button once and Heat
Index will show in place of the remote temperature.
Dew Point Temperature
Dew Point Temperature is the saturation point of the air, or the temperature to which the
air has to cool in order to create condensation. The higher the dew points, the higher the
moisture content of the air at a given temperature.
View Dew Point Temperature: From a normal display, press the HEAT/DEW button
twice and Dew Point will show place of the remote temperature.
Note: Dew Point is lower than the actual temperature.
Temperature/Humidity Trend indicators
The indoor and remote temperature/humidity trend indicators will update every 30
minutes or less. These trends represent temperature changes over the past three hours.
Example: At 1:00pm, the arrow indicates the change in temperature since 10:00am. At
1:30pm, the arrow will indicate the temperature change since 10:30am.
Temperature has risen in the past 3 hours.
Humidity has risen in the past 3 hours.
Temperature has not changed in the past 3 hours.
Humidity has not changed in the past 3 hours.
Temperature has fallen in the past 3 hours.
Humidity has fallen in the past 3 hours.
Model: S88907
Page | 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Search for Remote Sensor
Hold the HEAT/DEW button to search for the remote sensor.
The strength signal icon will animate until the sensor signal is received or for
3 minutes if no signal available.
MIN/MAX (View, Reset)
The Weather station provides the daily minimum and maximum temperatures each day
starting at midnight (12:00 AM). The Weather station automatically resets the min/max
temperatures at midnight (12:00 AM).
View MIN data: Press and release the ▼ button to view the minimum
Indoor and Remote Temperatures.
Reset MIN data: Hold the ▼ button for five seconds and the Indoor and
Remote Minimum Temperatures will be reset.
View MAX data: Press and release the ▲button to view the maximum Indoor and
Remote Temperatures.
Reset MAX data: Hold the ▲ button for five seconds and the Indoor and all Remote
Maximum Temperatures will be reset.
Note: The temperature area shows dashes briefly then return to current temperatures.
Animated Color Forecast Icons
Animated forecast icons use changing atmospheric pressure to predict weather
conditions for the next 12-hours with 70-75% accuracy.
INTELLIGENT WEATHER FORECAST
This station learns; please allow 3 to 4 weeks for barometric calibration. This will ensure
an accurate personal forecast for your location.
The Weather station samples the barometric pressure every twelve minutes.
These samples are averaged hourly and daily then stored in nonvolatile memory.
The three hour pressure icon change is based off of the last four average hourly
readings.
Model: S88907
Page | 11
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT: As the Weather station builds memory, it will compare the current
average pressure to the past forty day average pressure for increased accuracy. The
longer the Weather station operates in one location, the more accurate the forecast icons
will be.
Pressure Tendency Indicators (Up, Right, Down Arrows)
Working with the forecast icons, the tendency indicators let you know if the weather is
improving, steady or worsening.
Steady Pressure Weather
Rising Pressure Weather
is Expected to Improve
Falling Pressure Weather
is Expected to Stay the
is Expected to Worsen
Same
Manual WWVB Time Signal Search
Press the TIME SET button to start or stop a manual signal search. The WWVB Icon
flashes during signal search.
WWVB
ATOMIC
ICON
For information about WWVB visit:
Remote Sensor Positioning and Use
Mount the remote sensor on a north-facing wall or in any well shaded area. Under an
eave or deck rail is preferred.
The maximum wireless transmission range to the weather station is over 300 feet (91
meters) in open air, not including walls or floors.
Be sure the remote sensor is mounted vertically.
Low Battery icon
Low battery icon for weather station or remote sensor.
If the icon is displayed in the Remote Temperature section, replace batteries in
the remote sensor.
Low
If the icon is displayed in the Indoor Temperature section, replace batteries in
Battery
Icon
the forecast station.
Care and Maintenance
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
Always purchase the correct size and grade of battery most suitable for the intended
use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed correctly with regard to polarity (+and -).
Remove batteries from equipment with is not to be used for an extended period.
Remove expired batteries promptly.
Do not expose to extreme temperature, vibration or shock.
Clean with a soft damp cloth. Do not use solvents or scouring agents.
Model: S88907
Page | 12
Download from Www.Somanuals.com. All Manuals Search And Download.
The product is not a toy. Keep it out of reach of children.
The product is not to be used for medical purpose or for public information. It is
intended for home use only.
The specs of this product may change without prior notice.
Improper use or unauthorized opening of housing voids warranty.
If the product is not working properly, change the batteries and/or check the AC cord
connection.
Specifications
Indoor
Temperature Range:
Humidity Range:
Outdoor
+32°F to +122°F (0°C to 50°C)
1%-99% (RH)
Temperature Range:
Alkaline Batteries:
Lithium Batteries:
-40°F to 140°F (-40°C to 60°C)
-20°F to 140°F (-29°C to 60°C)
-40°F to -20°F (-40°C to -29°C)
Temperatures below - 20°F (-29°C) require Lithium batteries in the
remote sensor
NOTE:
Humidity Range:
1%-99% (RH)
Distance:
Over 300 ft. (91 meters) RF 433MHz (open air)
Power
Weather Station
Primary AC Power:
AC Adapter No:
5-volt AC power adapter (included)
GPU280500150WD00
Optional/Battery Backup
TX141TH-Bv2 Remote Sensor:
Battery Life
Optional 3-AAA, IEC, LR3 batteries (not included)
2-AA, IEC, LR6 batteries (not included)
Battery life is over 12 months when using the AC adapter for primary
power
Weather Station Battery Backup:
TX141TH-Bv2 Remote Sensor:
Battery life is over 24 months when using reputable battery brands for
both Alkaline and Lithium batteries
Dimensions
Weather Station:
6.1” W x 9.6” H x 1.06” D (155.9 x 243.8 x 26.9 mm)
TX141TH-Bv2 Remote Sensor:
1.74"L x 0.81"W x 5.1"H (44.2 x 20.5 x 130mm)
Warranty Information
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product
relating to manufacturing defects in materials & workmanship.
View full warranty details online at:
For warranty work, technical support or other information contact:
La Crosse Technology, Ltd
2830 South 26th St.
La Crosse, WI 54601
Contact Support: 1-855-605-6888
Model: S88907
Page | 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Registration:
Online Product Support:
Protected under U.S. Patents:
5,978,738
6,076,044
RE43903
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error,
or their consequences.
All trademarks and patents are recognized.
Model: S88907
Page | 14
Download from Www.Somanuals.com. All Manuals Search And Download.
|