Important Note:
For all users wanting to get additional informations on the function of the World Time Center there is an
alphabetically sorted subject index at the end of this manual offering a number of technical and functional
explanations. For use and operation of this product however the knowledge of this index is not necessary.
World Time Center
Putting into Operation
Basic Setup
Introduction
Congratulations on purchasing this state-of-the-art World Time Center as an example of superior design and
engineering. Providing radio controlled time, indoor temperature and humidity displays, outdoor temperature, this unit will
never keep you guessing on time, date or current and future weather conditions. Operation of this product is simple and
straightforward. By reading this operating manual, the user will however receive a better understanding of the WorldTime
Center together with the optimum benefit of all its features.
Battery
Compartment
World Time Center
Hanging Hole
LCD1
Battery Cover
1.
Open the battery cover of the World Time Center and - checking the correct polarities –
insert 2 x AA, IEC LR6 1.5V batteries into the battery compartment as indicated above and replace the cover.
Your World Time Center is now operational.
LCD2
2.
LCD3
SET-Key
Reset
+ -Key
To reset the World Time Center. Wait for at least 30 seconds and repeat the setup procedure above.
WORLDTIME-Key
LANGUAGE-
Key
Important!
After putting into operation (basic setup or reset) all key functions except for the “SET” and the “+” keys should
not be operated until the WWVB time signal has been received or the time is manually set.
TIMEZONE-Key
Self Programming after Basic Setup or Reset (Putting into Operation)
Features
After the the batteries are inserted (see “Putting into Operation”) into World Time Center and a self programming
sequence will start which cannot be influenced by the user. At first all segments in the LCD will light up for appr. 3
seconds. Next, the unit will perform a battery test followed by the measurements of indoor temperature and humidity,
and a scanning of the WWVB time signals. After this starting phase the indoor temperature (Left on LCD 3) will be
displayed along with the displays “- - -” in the weekday, time (LCD 1), WWVB time (LCD 2) and indoor humidity sections
(Right on LCD 3). If measurements and signal receptions are successful, the dashes will be updated one by one by the
real values measured and received.
World Time Center
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4 digits showing Hour and Minute in the main display
WWVB time signal radio-controlled clock with manual time display
12/24 hour display
Time zone selectable
World time display with specific place represented by 3 sucessive characters
Calendar display
Display of weekday (8 languages to choose from)
Display of current indoor temperature
Display of current indoor relative humidity
Display of 8 Moon phases troughout the year
°C or °F temperature display selectable
LCD contrast changeable to 8 different tones
Low battery indicator
Initial Displays
If the “SET” key is pressed after “- - -” is displayed (as described in 7.1), but before the real measurements are
displayed, the learning mode will be terminated. Apart from the temperature already displayed on LCD 3 the following
initial displays will now be assigned to the various sections on the LCD:
•
•
Date (LCD 1)
Time of day (LCD 2)
“MON 1.1.99”
“12:00”
If selected:
•
•
•
Worldtime location (LCD 1)
Worldtime (LCD 1)
Time zone (LCD 2)
“- - -”
“12:00”
“EST”
Wall Mounting
Getting started
Further default values:
Display modes
Remove all parts from the packaging and place onto a table in front of you. Ensure that the following parts are included:
•
•
•
•
Time:
Temperature:
Language for weekday display:
LCD Contrast:
12 hours
1.
2.
World Time Center (main unit)
Instruction manual
°F (degrees Fahrenheit)
GB (English)
Level 5
If any one of the above mentioned parts is missing please contact your supplier.
Please follow all further explanations and descriptions in this manual in order to ensure that your World Time
Center and Outdoor temperature sensor work correctly.
Note:
Download from Www.Somanuals.com. All Manuals Search And Download.
World Time Setting
12/24 Hours Setting
After entering the programming mode as described above the 12/24 hours display can be selected on LCD 2 in the
following way:
1.
2.
The hour digits of the worldtime on LCD 1 will start flashing. Select the desired hour by use of the “+” key. Setting
of minutes is neither possible nor necessary.
Press the “SET” key to move on to the “ °C/°F Setting”.
1.
The “12h” or “24h” will start flashing (Default setting 12h). Select the desired time display mode by use of the
“+”key.
°C/°F Setting
Note:
In 12 hours mode the date will be displayed in the configuration “Weekday / Month / Day”, in 24 hours mode in
“Weekday / Date / Month”.
Press the “SET” key to enter the “Time Setting“.
1.
2.
The temperature displays including the characters “°C” or “°F” will start flashing on LCD 3 (Default setting °F). By
use of the “+” key select “°C” for temperature display in degrees Celsius or “°F” for degrees Fahrenheit.
Press the “SET” key to move to the mode “LCD Contrast Setting”.
2.
Time Setting
LCD Contrast Setting
1.
2.
The hour digits will start flashing on LCD 2. Set the desired hours by pressing the “+” key followed by pressing the
“SET” key.
Now the minute digits will start flashing. Set the desired minutes by pressing the “+” key followed by pressing the
1.
2.
The word “LCD 5” will be flashing on LCD 1. This is the manufacturer's default setting.
Using the “+” key choose the most convenient contrast (0 - 7 contrast levels) for the location of the World Time
Center.
“SET” key to move to the “Weekday Setting”.
3.
Press the “SET” key to exit the programming mode and switch back to the normal display mode.
Note:
In 12 hours mode the time will be displayed with an additional “PM” for the time from 12:00 noon until 11:59.
Leaving the Programming Mode
Weekday Setting
•
•
To return to the normal display mode from anywhere in programming mode simply press any desired key but the
“SET” or the “+” key at any time.
If no keys are pressed for at least 15 seconds in programming mode, the Wallclock Weather Station will
automatically switch back to normal display mode.
1.
2.
The weekday symbols will be displayed on LCD 1 in the preset language and flashing. Set the desired weekday by
use of the “+” key.
Press the “SET” key to enter the mode “Month Setting”.
Reset of all Data
Month Setting
By removing the batteries from the World Time Center all displayed data will be lost. To reset all data perform a basic
setup as described in “Reset” above.
1.
2.
The month digits on LCD 1 will start flashing. Set the desired month by use of then “+” key.
Press the “SET” key to move to the mode “Date Setting”.
Data Reception
Date Setting
Criteria for Reception
1.
The digits for the date will start flashing on LCD 1 (Default setting 1). Set the desired date by use of the “+” key.
Note:
For reception and computing of displayed values, the software of the World Time Center performs a number of
comprehensive operations (see Index) which are not necessarily important for the user to know. In case the time is not
correctly displayed on LCD 2, then please see “ WWVB Reception Check”.
WWVB-Signal Test
The date can only be set in conjunction with the selected month. I.e., it is not possible to set the date 30 if the
month of February is selected.
Press the “SET” key to enter the mode “Setting of Year”.
2.
Year Setting
The World Time Center will automatically start scanning for the WWVB frequency signal (time signal transmission) after
the batteries are inserted. In normal surroundings (i.e. at a safe distance from interferring sources such as TV sets), it
takes between 6 to 10 minutes to receive the signal. If after 10 minutes of inserting the batteries the WWVB signal is not
properly received then check the following list before manually setting the time (see “Time Setting”) in programming
mode.
1.
The year digits will start flashing on LCD 1 (Default setting 1999). Select the desired year by use of the “+” key.
Note:
The year can be selected sequentially from 1998 to 2020 and will then start over again. The year furthermore will
only be visible on the display of LCD 1 in programming mode.
Press the “SET” key to switch to the mode “Worldtime Location Setting”.
1.
The distance of the units should be at least 1.5 - 2.0 Meters away from interferring sources such as computer
monitors or TV sets.
3.
2.
3.
Avoid placing the unit onto or in the immediate proximity of metal window frames.
Within thick concrete rooms such as basements and tower blocks, the WWVB frequency signal is naturally weaker
for reception. In extreme cases, place the unit closer to a window and/or point its front or rear towards the general
direction of NIST Radio Station WWVB in Ft. Collins, Colorado (again avoid placing near metal frames or
structures).
Worldtime Location Setting
1.
The dash representing the first character of the worldtime location (Default setting - - -) on LCD 1 will start flashing.
Select the desired character by use of the “+” key.
2.
3.
4.
5.
Press the “SET” key to move to the second character.
The second dash will start flashing. Select the desired character by use of the “+” key.
Press the “SET” key to switch to the third character.
Note:
Users may be located in areas where atmospheric disturbances are the immediate cause for not receiving the WWVB
frequency signal. During nighttime, atmospheric disturbances are usually less severe and reception is possible in most
cases. With a single daily reception, it is adequate for the World time Center to keep time accuracy deviation to below
0.5 seconds in a period of 24 hours.
When reception is successful, the WWVB transmission tower icon will start flashing in the upper center of LCD 2 as a
sign that the signal has been located and is about to be received. Once the signal has been locked, the WWVB tower
icon will stay fixed on the LCD and the received time will then update and correct the manually set time.
The third dash will start flashing. Select the desired character by use of the “+” key.
Note:
For designation of the worldtime location the characters “A” through “Z” and “0” as well as “-” and “ ” (Space)
can be chosen.
6.
Press the “SET” key to move to the mode “World Time Setting”.
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioning of World Time Center
Specifications
Radio controlled time signal
Recommended operating temperature
World Time Center
:
WWVB
Hanging
Hole
:
:
0°C to +50°C
8 levels
LCD contrast
Temperature measuring range
Indoor
:
+14ºF to +158ºF with 0.2ºF resolution
(-9,9°C to +69,9°C with 0.1°C
resolution)
(“OFL“ displayed if outside this range)
19% to 96% with 1% resolution
Relative indoor humidity range
:
The World Time Center has been designed to be hung on a wall. To mount please do the following:
Data checking intervals
Indoor Temperature
Indoor Humiditiy
:
:
Every 20 seconds
Every 1 minute
1.
2.
Fix a screw (not supplied) into the desired wall, leaving the head extended out the wall by about 5 mm as indicated
above.
Using the World Time Center's hanging hole on the back of the unit, carefully hang it onto the screw. Always
ensure that the product securely locks onto the screw head before releasing.
Power Supply
World Time Center
Dimensions (L x W x D)
World Time Center
:
:
3 x 1.5V Battery Typ AA, IEC LR6
375 x 30 x 250mm
Note:
Users are recommended to check that the WWVB time signal is properly received before permanent
standing, hanging or mounting of World Time Center. Should the World Time Center not pick up the signal
from the desired location, then relocate slightly. Once the signal is received, mount your system units
permanently.
Liability Disclaimer
•
The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences
that occur should any inaccurate reading take place.
•
•
•
•
•
This product is not to be used for medical purposes or for public information.
This product has been designed for strict use in the home
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
Important Notes
•
•
Avoid placing the World Time Center where it can be exposed to sudden changes in temperature, i.e. direct
sunlight, extreme cold and wet/moist conditions since the design of this product is for indoor use only. This will help
to avoid any inaccurate readings and any possible damage to the unit.
Should the World Time Center be exposed to extreme and sudden temperature changes, it will lead to rapid
changes in its readings and thereby reduce its accuracy.
No part of this manual may be reproduced without written consent of the manufacturer.
Subject Index
Care and Maintenance
Here the interested user will find a number of additional informations regarding the function of this Wallclock
Weather Station. Their knowledge however is not necessary for efficient operation of this system.
•
•
Avoid placing the units in places prone to extreme temperatures, vibration and shock as these may cause damage
and inaccurate readings.
When cleaning the World Time Center and Temperature Sensor's displays and casings, use a soft damp cloth
only. Do not use solvents or scouring agents as they may mark the LCDs and casing.
Do not submerge the units in water.
Clock, Radio Controlled
The time base for radio controlled time and date is a operated by the NIST radio station WWVB in Ft. Collins, Colorado.
WWVB broadcasts are used by millions of people throughout the United States to synchronize electronic products like
clocks, clock radios and wristwatches. WWVB continuously broadcasts time and frequenzy signals at 60kHz and the
time information received and displayed is absolutely accurate regardless of summer or wintertime.
•
•
Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of
the recommended size.
•
Do not make any attempts to repair the units. Return them to their original point of purchase for repair by a
qualified engineer. Opening and tampering with the units may invalidate their guarantee.
Software Operations
Battery Change
•
WWVB Time Signal
Once every day with reception within 12:00am to 6:00am, after every setup or reset and after leaving the
programming mode with the time manually changed the software of the World Time Center will start a reception of
the WWVB time signal.
For best performance, batteries to all units should be replaced when the low battery indicator is displayed on the LCD of
the World Time Center and the Outdoor temperature sensor or at least once a year to maintain maximum running
accuracy.
•
Indoor Temperature and Humidity
The software of the World Time Center will perform measurements of the current indoor temperature every 20
seconds, the current indoor humidity every 1 minute. In programming mode and while any one key is pressed no
WWVB reception will take place.
Please help in the preservation of the environment and return used up batteries only to an
authorized depot.
•
Battery
After setup, reset or after every 12:00 am reception a low-battery detection is started by the software of the World
Time Center. If the batteries run low, a low battery indication flag is shown on the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials
and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North
America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La
Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by
a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request
as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with
new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All
replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse
Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days,
whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by
this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or
repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting
your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. La Crosse
Technology, Ltd will pay reasonable return shipping charges to the owner of the product.
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following
specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of
reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to
the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from
failure to follow instructions contained in your owner’s manual; (5) damage resulting from the performance of
repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service
center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8)
the products inability to receive a signal due to any source of interference.. This warranty covers only actual
defects within the product itself, and does not cover the cost of installation or removal from a fixed installation,
normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations
resulting from installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE,
OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no
allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to
you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2809 Losey Blvd. S.
La Crosse, WI 54601
Phone: 608.782.1610
Fax: 608.796.1020
e-mail:
(warranty work)
(information on other products)
web:
Questions ? Instructions? Please visit:
EJIN70920010
Download from Www.Somanuals.com. All Manuals Search And Download.
World Time Center
Operating Manual
Canada
Mountain Time
(-7h GMT)
Pacific Time
(-8h GMT)
Central Time
(-6h GMT)
Eastern Time
(-5h GMT)
United States
Mexico
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
1.
2.
THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|