• ADM loop technology with
System Sensor/200 protocol
• One output with dry relay contacts
230VAC
• Status LED
• Setting of module address via
decadic rotary switches
• Prepared for mounting on a DIN rail
Description
The Control Module M201E-240-DIN serves to actuate
external devices by means of one normally open and
a separate normally closed relay contact, suitable for
switching 230VAC. Communication to the fire detec-
tion control panel is established via the ADM loop using
System Sensor/200 protocol.
A status LED indicates the condition of the control mo-
dule.
The case is prepared for mounting on a 35mm DIN rail.
Separate terminals enable the operation of the module
with or without the integrated dual-isolator.
Specifications
Operating voltage
Current consumption
Contacts
Supply through loop voltage
approx. 510µA (quiescent)
1 × NO, 1 × NC
Contact rating
Ambient temperature
Dimensions L × W × H
Colour
5A/30VDC or 5A/230VAC
-20°C to +60°C
127 × 76 × 48 (mm)
cream
Weight
140g
Approval
VdS G202141
Order number
Order name
249106
Control Module 1xRel.Out-DIN/Anal./200/SS M201E-240-DIN
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
M201E-240-DIN_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
|