6500R/6500RS
• Conventional technology
• Transmitter and receiver unit
integrated into one housing
• Detection of clear and dark smoke
• 6 sensitivity levels selectable
• Test filter for optimum commissioning
• Automatic drift compensation
Description
With a range of 5m to 70m the Beam Smoke Detector Four levels have a fixed response threshold, whereas
6500R serves for the monitoring of open spaces. The two further levels with variable response sensitivity al-
transmitter/receiver unit projects a pulsed infrared light low to adjust the detector to changing environmental
beam through the area to be protected towards a reflec- conditions.
tor, which returns the light beam. The smoke detection
is based on the attenuation of the light beam by means The detector is delivered with a reflector, which can be
of smoke.
used for ranges from 5m to 70m. A three-part reflector
The detector uses intelligent evaluation algorithms to set, which extends the range of the detector to 100m,
compensate for the influence of contamination of the is available as accessory.
optical measurement system. With that, the response
sensitivity of the detector is kept constant for a long The Beam Smoke Detector 6500RS corresponds to the
time – an effective step to avoid false alarms.
Beam Smoke Detector 6500R in design and function.
In addition, the 6500RS can be remotely activated, al-
Conventional technology is used for alarm transmission lowing easy function testing during maintenance. This
to the fire detection control panel. The response sen- test simulates light obscuration by means of a motor-
sitivity of the detector can be set to one of six levels. driven test filter.
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
6500R_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
|