B501/B501DG
• Suitable for automatic detectors
in ADM loop technology with
System Sensor/200 protocol
• Screw terminals for secure
connection of multiple wires
• Terminals for connection of remote
indicator
• Mechanical theft protection can be
activated
Description
The Detector Base B501/B501DG is designed to ac-
commodate intelligent fire detectors Series 200 and
500 for use in ADM loops with System Sensor/200
protocol. Due to its robust multi-wire screw terminals,
the detectors can be wired with ease, thus achieving a
secure and durable connection.
The base provides the possibility to easily connect an
external remote indicator, and has been designed for
surface mounting in dry rooms. For special applicati-
ons a range of accessories (for moist room, false cei-
ling or flush installation) is available.
A mechanical theft protection of the detector can
optionally be activated at the detector base.
The Detector Base B501DG is 6mm higher than the
Detector Base B501, and is therefore suitable for thick
cables. It has the same height as the Isolator Detector
Base B524IEFT-1.
Specifications
Ambient temperature
Relative humidity
Colour
-30°C to +70°C
0 – 95% (no condensation)
cream
Detector Base B501
Dimensions ø × H
Weight
102 × 20 (mm)
53g
Order number
Order name
246002
Detector Base/Anal./500/200/SS B501
Detector Base B501DG
Dimensions ø × H
Weight
102 × 26 (mm)
57g
Order number
246015
Order name
Detector Base/Anal./500/200/SS B501DG
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
B501_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
|