LOREX Technology VCR SG7965 User Manual

"Professional"  
1280 Hr Time Lapse VCR  
40 Hr Real-Time with Jog Shuttle  
INSTRUCTION MANUAL  
English Version 1.0  
Real Time & High Density  
CLOCK  
COUNT  
ALARM  
REMAIN  
KEY LOCK  
CLEAR  
BUZZER OFF  
LOCK OFF  
Model: SG7965  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
• Time Lapse VCR Function  
CONTENTS  
INTRODUCTION  
Features/Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
PREPARATION  
• Trigger Function  
Control Names and Locations . . . . . . . . . . . . . . . . .4-8  
Installation & VCR to Monitor and CCD  
• Buzzer Function  
Camera Connection . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Multiplexer/Matrix Switcher Connections . . . . . . . .10-11  
Alarm Record Connection . . . . . . . . . . . . . . . . . . . . .12  
Series Record Connection . . . . . . . . . . . . . . . . . . . . .12  
Setting the On Screen Display . . . . . . . . . . . . . . . . . .13  
Setting the VCR SET UP Menu . . . . . . . . . . . . . . . . .14  
Setting the Set Time . . . . . . . . . . . . . . . . . . . . . . . . .15  
Video Cassette Tapes . . . . . . . . . . . . . . . . . . . . . . . .16  
PLAYBACK  
Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Special Effects Playback . . . . . . . . . . . . . . . . . . .18-19  
Tape Counter Memory Feature . . . . . . . . . . . . . . . . .20  
RECORDING  
• Auto Switcher Functionality  
• Tape Compatibility  
• Elapsed Time Display  
• Series Recording Function  
• Alarm Recording Function  
Normal Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Repeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Series Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Alarm Recording . . . . . . . . . . . . . . . . . . . . . . . . .25-26  
ADDITIONAL INFORMATION  
Check the Alarm Record Information . . . . . . . . . . . . .27  
Recording Time Table Information . . . . . . . . . . . . . . .27  
Check the Power Fail Recall . . . . . . . . . . . . . . . . . . .28  
Key Lock Function . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Service Guide Table . . . . . . . . . . . . . . . . . . . . . . . . .30  
VIDEO Head Cleaning . . . . . . . . . . . . . . . . . . . . . . .30  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
Warning : The battery used in this device may present a fire or chemical burn hazard if mis-  
treated. Do not recharge, disassemble, incinerate, or heat above 212°F (100°C). Replace the  
battery with Matsushita Elec. Ind., Co., Ltd. (Panasonic) part no. VL2330 only. Use of another  
battery may present a risk of fire or explosion. Dispose of used batteries. Keep away from  
children. Do not disassemble or dispose of in fire.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL NAMES AND LOCATIONS  
FRONT  
CLOCK  
COUNT  
ALARM  
REMAIN  
KEY LOCK  
CLEAR  
BUZZER OFF  
LOCK OFF  
REMOTE CONTR OL  
7
1
2
8
9
10  
11  
12  
13  
3
4
5
6
14  
15  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL NAMES AND LOCATIONS  
FRONT  
1. POWER/TIMER button  
9. KEY LOCK Indicator  
(Press for on; press again for off)  
The display window becomes brighter  
when the VCR is switched on.  
Timer function is activated when power  
switch is in the Off position.  
Illuminates during key lock mode is activated.  
10. Cassette loading slot  
Cassette tape is inserted in this slot.  
11.CLEAR, KEY LOCK OFF, BUZZER OFF  
Press to delete the information stored on  
screen display, such as Alarm recall,  
Power fail and Timer program.  
2. MENU button  
Press to activate the Menu selection.  
It can also be used to stop the buzzer  
sound and to release key lock mode if it  
is held for at least 3 seconds.  
3. REC (RECORD) button  
Press to begin recording.  
12. CLOCK, COUNT, REMAIN  
Pressing this button toggles between the  
CLOCK, COUNT, and REMAIN displays.  
CLOCK shows the current time. COUNT  
shows the incremental counter for  
recording or playing, and REMAIN indi-  
cates the remaining time on the tape.  
4. MOVE button  
Press to change a value in Menu mode  
or to operate tracking during playback  
or slow.  
Press repeatedly to move the Time and  
Date display’s position.  
If a still picture vibrates vertically, stabi-  
lize it by pressing the MOVE button.  
13. Shuttle Ring  
Refer to page 19.  
5. SEL (SELECT) button  
14. Jog Ring  
Press to change the value or to operate  
tracking during playback or slow.  
If a still picture vibrates vertically, stabi-  
lize it by pressing the SEL button.  
Refer to page 19.  
15. PAUSE/STILL button  
When pressed during recording, tape  
movement stops temporarily. Press again  
to continue the recording.  
When pressed during playback, tape  
movement stops. Press again to advance  
by still frame.  
It can also be used to search alarm  
recording by pressing this button in stop  
mode.  
6. DOWN button  
Press to set speed in descending order 30H,  
18H, 6H.... during recording or playback.  
7. UP button  
Press to set speed in ascending order  
6H, 18H, 30H.... during recording or play-  
back.  
16. PLAY/REC CHECK button  
8. ALARM Indicator  
Press to play back a previously recorded  
tape. Press this button during recording  
to confirm the recording operation. It  
plays back the recording on screen for 4  
seconds and returns to recording mode.  
Illuminates when alarm record is set on and  
blinks during alarm record.  
It can be turned off by setting REC MODE to  
OFF under ALARM SET UP menu (only  
when there is no alarm record informa-  
tion on the ALARM RECALL menu. To  
erase the alarm record information, refer  
to “To erase the alarm record informa-  
tion” on page 27).  
17. STOP/EJECT button  
Press once to discontinue all tape related  
functions. Press again to eject the cas-  
sette.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL NAMES AND LOCATIONS (contd)  
REAR  
1
3
2
VIDEO IN  
1
2
3
4
5
6
7
8
9
ALARM IN  
ALARM OUT  
ALARM RESET  
GND  
AUDIO IN  
SERIES IN  
SERIES OUT  
WARNING OUT  
TRIGGER OUT  
GND  
10 LOW TAPE OUT  
11 SHOT REC IN  
12 GND  
1
2
3
4
5
6
7
8
9
10 11 12  
AUDIO OUT  
1
RESET  
VIDEO OUT  
5
4
1. POWER CORD  
3. VIDEO IN/OUT JACK  
Connect only to an AC 100-240V, 50/60Hz  
Connect the video input and output  
outlet.  
terminal.  
2. AUDIO IN/OUT JACK  
Connect the audio input and output  
terminal.  
4. RESET BUTTON  
Use this button to reset the VCR.  
5. 12-PIN TERMINAL BLOCK  
Connect external signals.  
Terminal Signal Levels  
TERMINAL  
1. ALARM IN  
SIGNAL LEVEL  
IN/OUT  
VIH: 4~5V, VIL: 0~0.6V  
VIH  
INPUT  
VIL  
T: above 250msec  
T
VOH  
VOH: 4~5V, VOL: 0~0.6V  
T: ALARM REC STATE  
VIH: 4~5V, VIL: 0~0.6V  
T: above 250msec  
2. ALARM OUT  
OUTPUT  
INPUT  
VOL  
T
T
VIH  
3. ALARM RESET  
5. SERIES IN  
VIL  
VIL  
VIH: 4~5V, VIL: 0~0.6V  
T: above 250msec  
VIH  
INPUT  
T
T
T
T
T
T
VOH: 4~5V, VOL: 0~0.6V  
T: above 250msec  
6. SERIES OUT  
7. WARNING OUT  
8. TRIGGER OUT  
10. LOW TAPE OUT  
11. 1-SHOT REC IN  
4, 9, 12. GND  
VOH  
VOH  
VOH  
VOH  
VIH  
OUTPUT  
OUTPUT  
OUTPUT  
OUTPUT  
INPUT  
VOL  
VOL  
VOL  
VOL  
VIL  
VOH: 4~5V, VOL: 0~0.6V  
T: until any key is pressed  
VOH: 4~5V, VOL: 0~0.6V  
T: above 8~10msec  
VOH: 4~5V, VOL: 0~0.6V  
T: below 5 min, end of tape  
VIH: 4~5V, VIL: 0~0.6V  
T: above 250msec  
COMMON  
0V  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
1. POWER button  
(Press for on; press again for off)  
The display window becomes brighter when the VCR is switched on.  
Timer function is activated when power switch is in the Off  
position.  
7
1
2
2. UP button  
Press to set speed in ascending order 6H, 18H, 30H.... during  
recording or playback.  
8
9
10  
11  
12  
13  
3
4
3. TR V button  
To operate tracking during playback or slow. If a still picture  
vibrates vertically, stabilize it by pressing the TR V button.  
4. MENU button  
5
6
Press to display current status on TV screen. You can change its  
contents.  
14  
5. P/STILL button  
15  
When pressed during recording, tape movement stops temporari-  
ly. Press again to continue the recording.  
When pressed during playback, tape movement stops. Press  
again to advance by still frame.  
It can also be used to search alarm recording by pressing this  
button in stop mode.  
6. REW (Rewind)  
To rewind the tape during the STOP mode or for fast reverse pic-  
ture search during playback.  
7. EJECT  
Press to eject the cassette in the VCR.  
8. ENTER (SELECT) button  
Press to change the value or to operate tracking during playback  
or slow.  
9. TR v (MOVE) button  
Press to change the value or to operate tracking during playback  
or slow. If a still picture vibrates vertically, stabilize it by pressing  
the TR v button.  
10. DOWN button  
Press to set speed in descending order 30H, 18H, 6H.... during  
recording or playback.  
11. REC/PLAY HOURS button  
Press to set speed in ascending order 6H, 18H, 30H.... during  
recording or playback.  
12. STOP  
Press to discontinue all tape related functions.  
13. REC (RECORD) button  
Press to begin recording.  
14. FF (Fast Forward)  
To advance the tape during the STOP mode or for fast forward  
picture search.  
15. PLAY (PLAY/REC CHECK) button  
Press to play back a previously recorded tape. Press this button  
during recording to confirm the recording operation. It plays back the  
recording on screen 4 seconds and returns to recording mode.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL NAMES AND LOCATIONS (contd)  
INDICATOR PANEL  
1
2
3
4
5
6
7
ALARM  
SERIES  
REC  
TIMER  
INDEX  
P.FAIL  
H
K.LOCK  
REPEAT  
12  
11  
10  
9
8
1. TIME LAPSE VCR TIME Indication  
2. ALARM Indication  
(ALARM REC ON indication)  
3. SERIES Indication  
7. INDEX Indication  
8. POWER FAILURE Indication  
9. KEY LOCK indication  
10. REPEAT Indication  
4. RECORD Indication  
5. TIMER Indication  
6. CASSETTE Indication  
11. FUNCTION Indication  
(CLOCK, TAPE COUNTER, ERROR)  
12. VCR FUNCTION Indication  
VCR FUNCTION Indication  
PLAYBACK INDICATION  
PLAYBACK  
RECORDING INDICATION  
RECORDING  
PAUSE STILL  
FAST FORWARD  
REWIND  
TIMER RECORDING  
ALARM INDEX  
FORWARD SLOW PICTURE/  
FORWARD FIELD ADVANCE  
ALARM RECORDING  
SERIES RECORDING  
REVERSE SLOW PICTURE/  
REVERSE FIELD ADVANCE  
CUE  
REVIEW  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connect your VCRs AUDIO/VIDEO output jacks to the A/V input jacks on back of your  
monitor.  
Connect the CCD camera to VCRs VIDEO input jack.  
VCR TO MONITOR AND CCD CAMERA CONNECTION  
The cables for audio and video connection are not provided with your VCR.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
MULTIPLEXER CONNECTIONS  
If the multiplexer has two output terminals (MONITOR OUT, PB OUT), connect monitor to the PB  
OUT terminal if you want to see the playback picture.  
To use the multiplexer and trigger function properly, refer to the multiplexer instruction manual.  
HOW TO CONNECT MULTIPLEXER WITH TRIGGER INPUT TERMINAL  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MATRIX SWITCHER CONNECTIONS  
HOW TO CONNECT SWITCHER WITHOUT TRIGGER INPUT TERMINAL  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARM RECORD CONNECTION  
Connect alarm output of external device to alarm input of VCR, and then connect alarm out  
GND of device to alarm input GND of VCR.  
1
2
3
4
5
6
7
8
9
10 11 12  
SERIES RECORD CONNECTION  
Make all connections to the first VCR before making any connections to the other VCRs in the  
series.  
After connecting, turn on the VCRs and then select the ON: SERIES mode in REC MODE  
menu. (Refer to the page 24.)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS THE ON SCREEN DISPLAY  
The following pages describe the on screen selections to be set.  
PREPARATION  
Turn on the power of both the VCR and the monitor.  
If you have a TV instead of monitor, turn on the power of TV  
and then set the TVs source selector to VIDEO.  
MENU SELECTION  
Your VCR allows adjustment of several features.  
1 Press MENU button and the main menu will appear.  
2 Select the desired menu with the MOVE button and then  
press the SEL button.  
REC MODE (pages 21-22, 24)  
VCR SET UP (pages 14-15)  
VCR SET UP  
REC MODE  
G
CLOCK SET  
ELAPSED TIME  
VHS-TAPE  
G
REC TIME  
000H  
10SEC  
1 FIELD  
OFF  
INTERVAL  
E-180  
AUTO  
ON  
TRIGGER OUT  
SERIES  
REPEAT OPTION :  
VIDEO  
DISPLAY  
AUDIO PLAY  
QUASI V-SYNC  
ON  
STOP AT EOT.  
ON  
(MOVE) (SELECT) (MENU)  
(MOVE) (SELECT) (MENU)  
TIMER REC SET UP (page 23)  
ALARM SET UP (pages 25-27)  
MAIN MENU  
ALARM SET UP  
SET DAY START END SPD  
G
REC MODE  
DURATION  
BUZZER  
ALARM READY  
ALARM RECALL  
6H  
1 MIN  
ON  
G
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
6
6
6
6
6
6
6
6
MENU  
G
VCR SET UP  
ON  
REC MODE SET UP  
TIMER REC SET UP  
ALARM SET UP  
POWER FAIL RECALL  
LANGUAGE ENGLISH  
(MOVE) (SELECT) (MENU)  
(MOVE) (SEL) (CLEAR) (MENU)  
(MOVE) (SELECT) (MENU)  
POWER FAIL RECALL (page 28)  
LANGUAGE SELECTION  
POWER FAIL RECALL  
MENU  
G1 OFF 01/01/03 20:56:55  
ON  
01/01/03 20:56:57  
VCR SET UP  
2 OFF 01/01/03 20:56:50  
ON 01/01/03 20:56:53  
3 OFF 01/01/03 20:56:47  
ON 01/01/03 20:56:49  
4 OFF 01/01/03 20:56:43  
ON 01/01/03 20:56:46  
(DOWN) (CLEAR) (MENU)  
REC MODE SET UP  
TIMER REC SET UP  
ALARM SET UP  
POWER FAIL RECALL  
G
LANGUAGE ENGLISH  
(MOVE) (SELECT) (MENU)  
You can select the  
language among  
ENGLISH, FRANCAIS,  
DEUTSCH, ITALIANO,  
ESPAÑOL, POLSKI and  
.
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE VCR SET UP MENU  
MAIN MENU  
PREPARATION  
Turn on the power of both the VCR and the monitor.  
If you have a TV instead of monitor, turn on the power of TV  
and then set the TVs source selector to VIDEO.  
MENU  
G
VCR SET UP  
REC MODE SET UP  
TIMER REC SET UP  
ALARM SET UP  
1 Press MENU button. The main menu will appear.  
POWER FAIL RECALL  
LANGUAGE ENGLISH  
Press MOVE to choose VCR SET UP.  
(MOVE) (SELECT) (MENU)  
2 Press SEL button. The VCR SET UP menu will appear.  
VCR SET UP MENU  
VCR SET UP  
1. CLOCK SET  
G
CLOCK SET  
ELAPSED TIME  
VHS-TAPE  
E-180  
AUTO  
ON  
Details are on page 15.  
VIDEO  
DISPLAY  
AUDIO PLAY  
QUASI V-SYNC  
ON  
ON  
(MOVE) (SELECT) (MENU)  
2. ELAPSED TIME  
Check the used time of head by pressing  
.
Press MOVE to choose a  
desired item on the VCR  
SET UP menu.  
SEL  
3. VHS-TAPE  
ELAPSED TIME  
Choose the tape type used (E-180, E-240, E-260, E-300) by  
pressing  
DATE OF FIRST USE:  
01/01/03  
.
SEL  
PERIOD IN USE:  
00004 HOURS  
4. VIDEO  
(MENU)  
Choose the cameras color type (B/W, AUTO, COLOR) by  
pressing  
.
SEL  
VCR SET UP  
5. DISPLAY  
CLOCK SET  
ELAPSED TIME  
G
VHS-TAPE  
VIDEO  
DISPLAY  
AUDIO PLAY  
QUASI V-SYNC  
(MOVE) (SELECT) (MENU)  
E-180  
AUTO  
ON  
The time/date DISPLAY is switched between ON and OFF by  
pressing SEL.  
ON  
ON  
6. AUDIO PLAY  
The audio is switched between ON and OFF during playback  
by pressing SEL.  
7. QUASI-SYNC  
The quasi-sync is switched between ON and OFF during play-  
back by pressing SEL.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE SET TIME  
Things to know before starting  
The clock uses the 24-hour system.  
The initial SET DAY Setting is JANUARY 1, 2003.  
MAIN MENU  
MENU  
PREPARATION  
G
VCR SET UP  
Turn on the power of both the VCR and the monitor.  
If you have a TV instead of monitor, turn on the power of TV  
and then set the TVs source selector to VIDEO.  
REC MODE SET UP  
TIMER REC SET UP  
ALARM SET UP  
POWER FAIL RECALL  
LANGUAGE ENGLISH  
1 Press MENU button. The main menu will appear.  
(MOVE) (SELECT) (MENU)  
VCR SET UP MENU  
2 Press MOVE to select the VCR SET UP item and then  
VCR SET UP  
press SEL. The VCR SET UP menu will appear.  
G
CLOCK SET  
ELAPSED TIME  
VHS-TAPE  
E-180  
AUTO  
ON  
3 Press MOVE to select the CLOCK SET item and then  
press SEL. The CLOCK SET UP menu will appear.  
VIDEO  
DISPLAY  
AUDIO PLAY  
QUASI-V-SYNC  
ON  
ON  
(MOVE) (SELECT) (MENU)  
4 Press SEL and then DOWN or UP to set a day and then  
press SEL to move to month item.  
CLOCK SET UP MENU  
CLOCK SET UP  
5 Press DOWN or UP to set a month and then press SEL to  
move to year item.  
DD/MM//YY  
DATE 23 / 05 / 03 FRI  
G
HH/MM/SS  
TIME 17 / 30 / 00  
6 Press DOWN or UP to set an year and then press SEL.  
The day of the week will display automatically.  
(MOVE) (SELECT) (MENU)  
7 Press MOVE to move cursor to TIME item and then press  
SEL to move to hour item.  
8 Press DOWN or UP to set an hour and then press SEL to  
move to minute item.  
12H  
17: 30 : 00  
23 / 05 / 03  
9 Press DOWN or UP to set a minute and then press SEL to  
move to second item.  
(TV screen/monitor)  
Time and Date display  
position change  
10 Press DOWN or UP to set a second and then press SEL.  
Press MOVE repeatedly  
until desired position is  
achieved. The Time and  
Date display moves  
clockwise.  
11 Press MENU button when finished.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO CASSETTE TAPES  
SAFETY TAB  
WHEN HANDLING VIDEO CASSETTES  
Do not expose video cassettes to extreme heat, high humidi-  
ty, or strong magnetic fields.  
Do not tamper with the cassette mechanism.  
Do not touch the tape with your fingers.  
Always store an unused cassette in its case.  
To prevent accidental era-  
sure, remove the tab after  
recording.  
To record again, cover the  
hole with vinyl tape.  
LOADING  
Hold the cassette with the arrow side up (top). Insert the  
cassette gently into the slot in the direction of the arrow (on the  
cassette) until the loading mechanism automatically pulls the  
cassette into the unit. Make certain that the cassette is inserted  
correctly.  
If the cassette is not loaded correctly, the VCR will eject the  
cassette automatically after approximately 3 seconds.  
UNLOADING  
Press the STOP/EJECT button twice. The cassette will be eject-  
ed automatically. After the cassette is visible in the tape slot, pull  
it out to remove it.  
Unloading the cassette is possible only when the power cord  
is connected to the wall outlet.  
The cassette can be ejected when the STOP/EJECT button is  
pressed, even if the VCRs power is OFF.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NORMAL PLAYBACK  
PREPARATION  
Turn on the power of both the VCR and the monitor.  
If you have a TV instead of monitor, turn on the power of TV  
and then set the TVs source selector to VIDEO.  
REW  
REV  
F. F  
CUE  
ALARM  
NORMAL PLAYBACK  
KEY  
LOCK  
PAUSE / STILL  
PLAY  
/
REC CHK  
STOP / EJECT  
1 Insert a prerecorded video cassette.  
The  
indicator will light and the VCR will power-up auto-  
MENU  
REC  
matically.  
POWER / TIMER  
• If a tape without a record protect tab is inserted, the unit will  
start the playback automatically.  
MOVE  
DOWN  
SEL  
CLEAR  
KEY LOCK OFF  
BUZZER OFF  
TRACKING  
UP  
CLOCK  
COUNT  
REMAIN  
2 Press the PLAY/REC CHK button.  
REC  
/
PB SPEED  
Press REC/PB SPEED (DOWN or UP) button to choose the  
desired time mode.  
The select time is displayed in the VCR indicator panel.  
Select the time while the tape is stopped or being played back.  
6H  
18H  
30H  
72H➔  
96H  
120H  
168H  
240H➔  
480H➔  
960H  
• The time mode can not be changed while the tape is playing  
back in 2H or 4H.  
CLOCK  
COUNT  
• If the tape reaches the end before STOP/EJECT is pressed,  
the VCR will automatically stop and rewind.  
REMAIN  
CLEAR  
BUZZER OFF  
LOCK OFF  
3 Press the STOP/EJECT button to stop playback.  
TRACKING CONTROL  
If noise appears on the screen during playback, press either  
TRACKING (MOVE / SEL) buttons until the noise on the screen  
is reduced.  
• In case of vertical jitter, adjust these controls very carefully.  
• Tracking is automatically reset to normal when the tape is  
ejected.  
MENU  
MOVE  
SEL  
UP  
ALARM  
TRACKING  
KEY LOCK  
DOWN  
REC / PB SPEED  
NOTES:  
Ensure that the selected tape recording and playback times match one another.  
A picture may vibrate vertically, but this is normal. Adjust the tracking  
A distortion may appear on the top of the screen, but this is normal. Adjust the tracking  
A sound may be muted during playback, but this is normal.  
If the recording hour and playback hour are different, the sound may not play back normally. (Set the  
AUDIO PLAY to OFF mode on the VCR SET UP menu.)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL EFFECTS PLAYBACK  
TO WATCH A STILL PICTURE  
During PLAYBACK mode...  
REW  
REV  
F. F  
CUE  
1 Press the PAUSE/STILL button.  
ALARM  
Still picture will appear on the monitor.  
KEY  
LOCK  
PAUSE / STILL  
PLAY  
/
REC CHK  
STOP / EJECT  
• If a still picture vibrates vertically, stabilize it by pressing the  
TRACKING (MOVE / SEL) buttons.  
• If the VCR is left in the STILL mode for more than 5 minutes,  
the VCR will automatically enter the STOP mode to protect the  
tape and video heads.  
MENU  
REC  
POWER / TIMER  
2 To continue normal playback, press the PLAY/REC CHK  
button.  
MOVE  
DOWN  
SEL  
CLEAR  
KEY LOCK OFF  
BUZZER OFF  
TRACKING  
UP  
CLOCK  
COUNT  
REMAIN  
REC  
/
PB SPEED  
TO WATCH A FIELD ADVANCE PICTURE  
During PLAYBACK mode...  
1 Press the PAUSE/STILL button.  
2 Rotate the JOG dial to forward / reverse or press  
PAUSE/STILL button repeatedly.  
The picture will slowly advance to forward or reverse field by  
field.  
CLOCK  
COUNT  
REMAIN  
CLEAR  
BUZZER OFF  
LOCK OFF  
3 To continue normal playback, press the PLAY/REC CHK  
button.  
TO SEARCH ALARM RECORDING  
MENU  
During STOP mode...  
MOVE  
SEL  
UP  
ALARM  
TRACKING  
KEY LOCK  
1 Press the PAUSE/STILL button.  
DOWN  
REC / PB SPEED  
The INDEX indicator will appear in the VCR indicator panel.  
2 Rotate and release the SHUTTLE ring to forward or reverse.  
Alarm video will play for 5 seconds and then search to the next  
alarm recording.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL EFFECTS PLAYBACK (contd)  
SHUTTLE RING  
During Still mode...  
1 Rotate the Shuttle Ring to forward or reverse.  
STILL (Pause)  
2 Rotate Shuttle Ring toward FF to advance the tape, or  
toward REW to reverse the tape. How far you rotate and hold  
the shuttle ring determines the speed at which the tape  
moves.  
-SLOW  
-PLAY  
-PLAY X 3  
-SEARCH  
SLOW  
PLAY  
PLAY X 2  
SEARCH  
REVERSE  
Rotate Shuttle Ring for variable speed adjust from Slow to  
FORWARD  
REW  
REV  
F. F  
CUE  
Search in the direction chosen.  
Shuttle Ring  
3 Release the Shuttle Ring to return to STILL mode.  
4 Press PLAY/REC CHK to return to normal playback speed.  
NOTES:  
During STOP mode, rotate and release the Shuttle ring to rewind or  
fast forward the tape.  
If the Shuttle Ring is used during the normal playback, the playback  
mode is changed between the double speed play and forward  
search on the forward direction, and among the reverse play,  
reverse triple-speed play, and reverse search on the reverse direc-  
tion. Releasing the ring resumes a normal playback mode.  
JOG DIAL  
During Still mode...  
REW  
REV  
F. F  
1 Move Jog Dial with finger toward FF to advance tape frame-  
by-frame, or toward REW to reverse tape frame-by-frame.  
Movement of the Jog Dial one clickmoves the tape by one  
frame. How fastyou move the Jog Dial determines how  
fast the frame-by-frame movement occurs.  
CUE  
Jog Dial  
Move Jog Dial for frame-  
by-frame tape playback  
forward or reverse.  
2 Press PLAY/REC CHK to return to normal playback speed.  
NOTES:  
Horizontal lines (noise bars) will appear on the monitor screen, but this is normal.  
The audio is automatically muted during special effect modes, so there is no sound during search.  
During the high-speed picture search modes, a short period is needed to stabilize tape speed when re-  
entering the PLAY mode. Slight interference may be observed during this period.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TAPE COUNTER MEMORY FEATURE  
REAL TIME COUNTER  
H
During PLAYBACK or RECORDING mode...  
CLOCK  
Press the CLOCK/COUNT/REMAIN button.  
Whenever you press the CLOCK/COUNT/REMAIN button, time  
H
and counter are displayed alternately in the VCR indicator panel.  
When the COUNTER is displayed...  
COUNTER  
• Counter changes to TIME when the cassette is ejected.  
• The real-time counter does not operate when nothing is  
recorded on the tape.  
H
REMAINING TIME  
COUNTER MEMORY FUNCTION  
This function is only provided when COUNTER is displayed in  
the VCR indicator panel.  
MENU  
REC  
1 Begin recording or playing a tape.  
POWER  
/
TIMER  
Continue to play or record.  
MOVE  
DOWN  
SEL  
UP  
CLEAR  
KEY LOCK OFF  
BUZZER OFF  
2 At the point where you want playback to begin, reset the  
real-time counter to 0:00:00 by pressing the CLEAR button  
once.  
TRACKING  
CLOCK  
COUNT  
REMAIN  
REC / PB SPEED  
The VCR will stop at the COUNTER position 0:00:00.  
3 Press the STOP/EJECT button when recording or playback  
finishes.  
4 Rotate and release the SHUTTLE ring to reverse.  
CLOCK  
COUNT  
REMAIN  
CLEAR  
BUZZER OFF  
LOCK OFF  
TAPE REMAINING  
This function allows the time of the remaining tape to be  
displayed during recording or playback.  
1 Press the CLOCK/COUNT/REMAIN button until the remain-  
ing time displays on the VCR indicator panel.  
2 Start recording or playback.  
The remaining time is not display during more than 72H”  
recording mode.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NORMAL RECORDING  
PREPARATION  
Turn on the power of both the VCR and the monitor.  
If you have a TV instead of monitor, turn on the power of TV  
and then set the TVs source selector to VIDEO.  
1
Insert the VIDEO CASSETTE that has the safety tab in place.  
REC MODE  
REC TIME  
G
6H  
2 Press REC/PB SPEED (DOWN or UP) to choose the  
TRIGGER OUT  
SERIES  
1 FIELD  
OFF  
desired recording mode.  
REPEAT OPTION :  
STOP AT EOT.  
The selected time is displayed in the VCR indicator panel.  
(MOVE) (SELECT) (MENU)  
6H  
18H  
30H  
72H➔  
96H  
120H  
168H  
240H➔  
480H  
960H  
000H  
• If you select the “000H” REC TIME, the INTERVAL time mode  
is changed on the REC MODE SET UP menu as below, to the  
second unit.  
REC MODE  
REC TIME  
INTERVAL  
TRIGGER OUT  
SERIES  
REPEAT OPTION :  
000H  
10SEC  
1 FIELD  
OFF  
G
10 SEC 20 SEC 30 SEC 1 MIN 2 MIN 3 MIN AUTO  
STOP AT EOT.  
(MOVE) (SELECT) (MENU)  
• If you select AUTO, this unit records when the external 1-SHOT  
REC signal is input.  
3 Press the REC button.  
Recording will start.  
(The REC indicator will appear in the VCR indicator panel.)  
4 Press the STOP/EJECT button to stop recording.  
.
To PAUSE the recording  
During the RECORDING mode...  
1 Press the PAUSE/STILL button to pause the tape.  
2 When you want to continue recording, press the  
PAUSE/STILL button again.  
• After 5 minutes in pause mode, the tape will be stopped  
automatically to protect the tape and the video heads.  
.
To Record Check  
When in record mode, pressing the PLAY/REC CHECK should  
cause the unit to reproduce recently recorded video.  
During the RECORDING mode...  
Press PLAY/REC CHECK to reproduce recently recorded video.  
During the Record Check, the unit cant record at all. After the  
Record Check, the unit returns to the original recording mode.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPEAT RECORDING  
This function is used to select various options before starting a  
recording.  
Things to know before starting  
Make sure a tape is in the each VCR and the safety tab is in  
place otherwise, the tape will be automatically ejected.  
Turn on the power of both the VCR and the monitor.  
MAIN MENU  
1 Press MENU button and the main menu will appear.  
MENU  
2 Press the MOVE to select REC MODE SET UP. Press SEL.  
The REC MODE menu will display.  
VCR SET UP  
G
REC MODE SET UP  
TIMER REC SET UP  
ALARM SET UP  
POWER FAIL RECALL  
LANGUAGE ENGLISH  
3 Press MOVE to choose the REPEAT OPTION item. Press  
SEL repeatedly to choose options.  
(MOVE) (SELECT) (MENU)  
STOP AT EOT: Goes into STOP mode when it reaches end of  
tape in RECORD mode.  
RE-REC EVEN IF ALARM: Rewinds tape and enters  
RECORD mode at beginning of tape even if there has been  
alarm.  
REWIND, STOP: Rewinds tape and then enters STOP mode.  
STOP IF ALARM: If there has been alarm, it goes into stop  
mode when it reaches end of tape in record mode. Otherwise  
it operates same as RE-REC even if alarm mode.  
REC MODE MENU  
REC MODE  
REC TIME  
6H  
TRIGGER OUT  
SERIES  
1 FIELD  
ON  
G
REPEAT OPTION :  
STOP AT EOT.  
(MOVE) (SELECT) (MENU)  
4 Press MENU when finished. Press MENU repeatedly to exit  
menu screen.  
5 Press REC button.  
The VCR will start recording.  
We do not recommend repeat recording for security  
applications.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIMER RECORDING  
This VCR can be programmed to record up to 8 programs. For  
programmed recording, the timer must be set for the starting  
and ending times.  
PREPARATION  
Make sure a tape is in the VCR and the safety tab is in  
place otherwise the tape will be automatically ejected.  
Turn on the power of both the VCR and the monitor.  
If you have a TV instead of monitor, turn on the power of TV  
and then set the TVs source selector to VIDEO.  
MAIN MENU  
MENU  
VCR SET UP  
REC MODE SET UP  
TIMER REC SET UP  
ALARM SET UP  
G
POWER FAIL RECALL  
LANGUAGE ENGLISH  
1 Press MENU and the main menu will appear.  
(MOVE) (SELECT) (MENU)  
2 Press the MOVE to choose the TIMER REC SET UP item.  
TIMER REC MODE MENU  
3 Press SEL to enter the TIMER REC SET UP menu.  
SET DAY START END SPD  
The TIMER REC SET UP menu will appear.  
G
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
6
6
6
6
6
6
6
6
4 Press SEL to select the SET item then press DOWN or UP  
to choose ON or OFF. Activated Timer Recording only  
when the SET item is set to ON.  
(UP) (DOWN) (SELECT) (MENU)  
5 Press SEL to move to next item and then set the next items  
(day, start time, end time recording hour) by using UP,  
DOWN and SEL buttons.  
SET DAY START END SPD  
G
OFF SUN 10 : 30 11 : 30  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
OFF - - - - - : - - - - : - -  
6
6
6
6
6
6
6
6
DAY option  
SUN~SAT: Same time once a week.  
M-F or S-S: Same time during Monday ~ Friday or  
Saturday ~ Sunday  
(UP) (DOWN) (SELECT) (MENU)  
DLY: Same time(s) every day  
NOTES:  
If you want to stop record-  
6 Press MENU when finished. Press MENU repeatedly to exit  
menu screen.  
ing during the  
Time  
press  
recording,  
STOP/EJECT  
If you are finished programming and you want to set the VCR  
to record the programs you have entered. A) MAKE SURE  
YOU HAVE INSERTED A TAPE INTO THE VCR. B) YOU  
MUST PRESS TIMER BUTTON BEFORE IT WILL RECORD  
ANY TIMER PROGRAMS (TIMER appears). The VCR is now  
set to record the preset programs.  
button  
more than 3 seconds.  
If you press button,  
TIMER  
the Time Lapses power is  
turned off. After finishing  
Time recording,  
the  
Time Lapses power is  
turned off again.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERIES RECORDING  
Series Recording mode is convenient when it is necessary to  
record with two or more VCRs. If you have two VCRs in series  
recording mode, the second VCR will start to record automati-  
cally at the end of the first VCR recording.  
Things to know before starting  
Before series recording, refer to page 12 for Series Record  
connection.  
Make sure a tape is in the each VCR and the safety tab is in  
place.  
SERIES recording is not available when the Timer recording  
is in standby mode.  
SERIES and REPEAT OPTION on the REC MODE menu  
can not be set to ON mode simultaneously.  
MAIN MENU  
MENU  
1 Press MENU button and the main menu will appear.  
VCR SET UP  
G
REC MODE SET UP  
TIMER REC SET UP  
ALARM SET UP  
2 Press MOVE to choose the REC MODE SET UP item and  
then press SEL.  
POWER FAIL RECALL  
LANGUAGE ENGLISH  
The REC MODE SET UP menu will appear.  
(MOVE) (SELECT) (MENU)  
3 Press the MOVE to choose the SERIES item.  
Press SEL to choose ON.  
REC MODE MENU  
REC MODE  
4 Press MENU when finished. Press MENU repeatedly to exit  
REC TIME  
6H  
menu screen.  
TRIGGER OUT  
SERIES  
REPEAT OPTION :  
1 FIELD  
ON  
G
5 Press REC button.  
The first VCR will start recording.  
STOP AT EOT.  
(MOVE) (SELECT) (MENU)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARM RECORDING  
Alarm recording will start when the external alarm signal is input.  
This function is available when the VCR is connected to an  
external device having an alarm output terminal.  
Things to know before starting  
Before alarm recording, refer to page 12 for alarm record  
connection.  
Make sure a tape is in the VCR and the safety tab is in place.  
MAIN MENU  
1 Press MENU and the main menu will appear  
MENU  
2 Press the MOVE to choose the ALARM SET UP item and  
VCR SET UP  
then press SEL.  
REC MODE SET UP  
TIMER REC SET UP  
ALARM SET UP  
The ALARM SET UP menu will appear.  
G
POWER FAIL RECALL  
LANGUAGE ENGLISH  
3 Press the MOVE to choose the REC MODE item. Press SEL  
repeatedly to choose recording hours.  
(MOVE) (SELECT) (MENU)  
The recording mode is changed as below.  
ALARM SET UP  
OFF 6H 18H 30H  
ALARM SET UP  
G
REC MODE  
DURATION  
6H  
1 MIN  
ON  
4
Press MOVE to choose the DURATION item. Press SEL  
repeatedly to choose the desired duration of recording.  
BUZZER  
ALARM READY  
ALARM RECALL  
ON  
The duration of recording is changed as below.  
30 SEC 1 MIN 3 MIN 5 MIN 10 MIN T.END AUTO1 AUTO2  
(MOVE) (SELECT) (MENU)  
• If you choose the T.END, alarm recording continues until tape  
ends.  
• If you choose the AUTO1, alarm recording continues until the  
alarm reset signal is input.  
• If you choose the AUTO2, alarm recording continues while the  
alarm signal is input.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARM RECORDING (contd)  
5 Press MOVE to choose the BUZZER item. Press SEL  
repeatedly to switch buzzer function during alarm recording.  
ALARM SET UP  
ALARM SET UP  
While the alarm is in process, the buzzer will ring. If you want  
to stop buzzer, press BUZZER OFF button.  
REC MODE  
DURATION  
BUZZER  
ALARM READY  
ALARM RECALL  
6H  
1 MIN  
ON  
G
ON  
6 Press MOVE to choose the ALARM READY item. Press  
SEL repeatedly to switch alarm ready function.  
(MOVE) (SELECT) (MENU)  
When selected ONand the alarm input is triggered, the unit  
will go to alarm record mode from either STOP, POWER OFF  
or RECORD modes.  
When selected OFFand the alarm input is triggered, the unit  
will go to alarm record mode only from the RECORD mode  
(including Timer Record). If the unit is in STOP or POWER  
OFF mode, it will ignore the alarm input command.  
ALARM SET UP  
REC MODE  
DURATION  
BUZZER  
ALARM READY  
ALARM RECALL  
6H  
1 MIN  
ON  
G
ON  
(MOVE) (SELECT) (MENU)  
7 Press MENU when finished. Press MENU repeatedly to exit  
menu screen.  
• ALARM indicator in VCR indicator panel blinks when alarm  
recording is proceeding.  
NOTES:  
When you select ALARM REC MODE ON (6H, 18H, 30H), the  
ALARM indicator will light in VCR indicator panel.  
You can not stop during ALARM REC MODE.  
For example: When the Alarm REC MODE is set to 6H  
Record  
Record  
Record  
Record  
(18H - 30H mode)  
(6H mode)  
(18H - 30H mode)  
(6H mode)  
Time Lapse  
Record  
Alarm  
Record  
Time Lapse  
Record  
Alarm  
Record  
Record Start  
Alarm signal  
is input  
Alarm record  
duration ends or  
alarm reset  
Alarm signal  
is input  
signal is input  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHECK THE ALARM RECORD INFORMATION  
To check or cancel the Alarm Record Information, use the  
ALARM RECALL function.  
MAIN MENU  
1 Press MENU button and the main menu will appear.  
MENU  
VCR SET UP  
REC MODE SET UP  
2 Press MOVE to choose the ALARM SET UP item and then  
press SEL.  
TIMER REC SET UP  
G
ALARM SET UP  
POWER FAIL RECALL  
LANGUAGE ENGLISH  
ALARM SET UP menu will appear.  
(MOVE) (SELECT) (MENU)  
3 Press MOVE to choose the ALARM RECALL item and then  
press SEL.  
ALARM REC MODE MENU  
ALARM RECALL menu will appear.  
ALARM SET UP  
REC MODE  
DURATION  
6H  
1 MIN  
ON  
To erase the alarm record inform  
BUZZER  
ALARM READY  
ALARM RECALL  
ON  
G
If you want to erase the alarm record information, press the  
CLEAR button.  
(MOVE) (SELECT) (MENU)  
4 Press MENU when finished. Press MENU repeatedly to exit  
menu screen.  
ALARM RECALL  
1
2
3
4
5
6
7
8
01/01/03  
01/02/03  
01/03/03  
--/--/--  
--/--/--  
--/--/--  
--/--/--  
--/--/--  
00:21:13  
04:07:37  
03:59:36  
--:--:--  
--:--:--  
--:--:--  
--:--:--  
--:--:--  
G
NOTES:  
Alarm recall can memorize up to 16 alarms, but only 8 can be dis-  
played on the monitor. Press  
page.  
repeatedly to see the next  
MOVE  
(UP) (DOWN) (CLEAR) (MENU)  
RECORDING TIME TABLE INFORMATION  
Recording Time  
Field / sec (NTSC)  
Field / sec (PAL)  
6H  
60  
50  
18H  
30H  
20  
12  
16.67  
10  
72H  
4.62  
3.53  
2.86  
2.07  
1.46  
0.74  
0.37  
3.85  
2.94  
2.38  
1.72  
1.22  
0.62  
0.31  
96H  
120H  
168H  
240H  
480H  
960H  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHECK THE POWER FAIL RECALL  
To check or cancel the POWER FAIL RECALL while you are play-  
back or stop mode, use the POWER FAIL RECALL function.  
MAIN MENU  
1 Press MENU and the main menu will appear.  
MENU  
2 Press MOVE button to choose the POWER FAIL RECALL  
item.  
VCR SET UP  
REC MODE SET UP  
TIMER REC SET UP  
ALARM SET UP  
POWER FAIL RECALL  
LANGUAGE ENGLISH  
G
3 Press SEL to enter the POWER FAIL RECALL menu.  
(MOVE) (SELECT) (MENU)  
POWER FAIL RECALL menu will appear.  
Power fail information will display up to 8 occurrences.  
POWER FAIL  
INFORM MENU  
To erase the power fail recall  
POWER FAIL RECALL  
1 OFF 01/01/03 20:56:55  
If you want to erase the power fail recall, select a power fail recall  
item to erase and then press the CLEAR button. The power fail  
recall is erased.  
ON  
01/01/03 24:00:00  
G2 OFF 03/06/03 12:25:50  
ON 03/06/03 16:56:53  
3 OFF --/--/-- --:--:--  
ON --/--/-- --:--:--  
4 OFF --/--/-- --:--:--  
ON --/--/-- --:--:--  
(UP) (DOWN) (CLEAR) (MENU)  
4 Press MENU when finished. Press MENU repeatedly to exit  
menu screen.  
KEY LOCK FUNCTION  
CLOCK  
COUNT  
ALARM  
REMAIN  
KEY LOCK  
CLEAR  
BUZZER OFF  
LOCK OFF  
KEY LOCK indicator  
LOCK OFF button  
When the external alarm signal is input the VCR is activated  
to KEY LOCK mode to protect unauthorized persons using  
the VCR . The KEY LOCK indicator lights and any button  
except LOCK OFF button is not be operated.  
Press and hold LOCK OFF button for more than 3 seconds  
to release KEY LOCK mode.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELF-DIAGNOSIS  
This function informs you of error messages to help solve problems more easily.  
When the VCR malfunctions, an error code is displayed in the VCR indicator panel.  
ERROR CODE TABLE  
DISPLAY  
DESCRIPTION  
INPUT SIGNAL  
CIRCUIT STATUS  
Mode Switch Position not Loading Motor Drive  
changed within 6 seconds IC  
SERVICE POINTS  
Loading Motor Error Mode Switch  
S1,S2,S3,S4  
Load Motor +, -  
after cassette loading attempt. Loading Motor  
Mode Switch  
Tape Loading Error  
Tape Eject Error  
Mode Switch  
S1,S2,S3,S4  
Load Motor +, -  
Mode Switch Position not Mode Switch  
changed within 6 seconds  
after cassette loading attempt.  
contacts  
Mode Switch  
S1,S2,S3,S4  
CST IN Switch  
Load Motor +, -  
CST Switch must be activat- CST IN Switch  
ed within 3 seconds, other-  
wise unit shut down will occur.  
contacts  
Reel Rotational Error Supply/Take-up  
CFG Signal present, but take- Capstan belt  
Reel Pulses  
up pulses are missing.  
Idler and reel gears  
CFG  
(Capstan motor running.)  
damaged  
Drum Motor Error  
DFG Switch  
Drum Motor (Slow Start)  
Drum Motor and  
DPF  
Motor must be up to speed  
within 3 seconds of operation.  
Control Circuits  
When a malfunction occurs in the VCR, press the POWER/TIMER button on the front of  
VCR to operate normally.  
An error message (Err) appears in the display continuously when any button is pressed;  
contact your dealer or service center.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE GUIDE TABLE  
Unit is Hour.  
1500 3000 5000 6000 7500 9000 1000012000  
NO.  
1
DESCRIPTION  
DRUM ASSY  
G
G
G
G
N
G
G
N
G
G
G
G
N
G
G
N
N
N
N
2
MOTOR CAPSTAN (D-35)  
BELT CAPSTAN  
3
4
BASE ASSY A/C  
G
G
G
G
G
G
G
G
G
G
G
G
G
G
N
5
HEAD F/E  
6
ARM ASSY IDLER  
HOLDER ASSY PINCH  
BAND ASSY TENSION  
HOUSING ASSY  
7
N
N
N
N
N
8
9
L
L
L
L
N
L
L
L
10  
CAPSTAN SOFT BRAKE  
Reference:  
N: Changing G: Cleaning L: Checking  
Notes:  
Check the running path adjustment when you change items 1, 2, 4, 5 and 10.  
Check the back tension when you change Band Assy Tension.  
VIDEO HEAD CLEANING  
Dirt accumulating on the head after a long period of time can cause the playback picture to  
become blurred or broken up. High quality video cassette tapes will not normally deposit dirt  
onto the video head, but old or damaged tapes might. Clean the video heads with a  
commercially available video heads cleaning tape.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
SYMPTOM  
CHECK POINT & CORRECTION  
Cassette cannot be inserted.  
Load cassette in direction indicated by arrow on cassette.  
A cassette is already in the VCR.  
Check if power indicator is lit on the VCR indicator panel. If not,  
make sure power cord is plugged in.  
If the  
indicator flashes, press the POWER/TIMER button  
again.  
The VCR will not go into the  
recording mode, even when  
REC button is pressed.  
The cassette has had the erase prevention tab removed. Stick a  
piece of cellophane tape over the erase prevention tab hole or  
select a different cassette.  
No picture appears on monitor  
screen when PLAY/REC CHK  
button is pressed.  
Try a different cassette tape.  
Try to confirm that the system is connected correctly.  
No picture, but audio is clear.  
The heads may require cleaning.  
Take VCR to a qualified Service Center for service.  
Interference on playback  
picture.  
Adjust fine tuning knob on monitor to obtain best picture.  
Adjust TRACKING (MOVE / SEL) control button.  
Take VCR to Service Center for service.  
VCR does not start at preset  
record starting time.  
Setup recording time according to instructions.  
The tape is ejected in the timer  
or alarm recording mode.  
The cassette has had the erase prevention tab removed. Stick a  
piece of cellophane tape over the erase prevention tab hole or  
select a different cassette.  
indication flashes.  
Insert a cassette.  
Using the RESET button (located at the rear panel of VCR)  
This button is used to solve the problems exhibited by the following symptoms :  
When the power cannot be turned on, even if the power cord is connected to the outlet.  
When the VCRs display does not display.  
When the VCR does not operate normally.  
- Use a pencil or ballpoint pen to press the RESET button.  
NOTES:  
If the RESET button is pressed, then all memorized data will be cleared, such as  
timer program, present time, alarm information, etc.  
If the present time is cleared, set the clock again.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
GENERAL  
Head System  
Four head helical scan azimuth system  
AC 100-240V, 50/60Hz  
Power Source  
Power Consumption  
Back up time (clock)  
Dimensions (WxHxD)  
Operating Temperature  
Operating Humidity  
Timer  
Approx. 15 Watts  
30 days  
14.2x 3.7x 10.7(360 x 94 x 273 mm)  
41 °F~105 °F (5 °C~40 °C)  
Less than 80% RH  
24-hour display type  
Weight  
Approx. 8.4 lb (3.8 kg)  
Tape Speed (NTSC)  
11.12 mm/sec (6H) , 3.70 mm/sec (18H),  
2.22 mm/sec (30H), 72H ~ 960H  
Tape Speed (PAL)  
11.695 mm/sec (6H) , 3.89 mm/sec (18H),  
2.33 mm/sec (30H), 72H ~ 960H  
Maximum Recording Time  
6 hours (NT:T-120/PAL:E-180, 6H),  
18 hours (NT:T-120/PAL:E-180, 18H),  
30 hours (NT:T-120/PAL:E-180, 30H), 72H ~ 960H  
0.5 in. (12.7 mm)  
Tape Width  
Rewind Time  
About 65 seconds (NT:T-120)(PAL:E-180)  
Video Signal System(PAL)  
CCIR Standard (625 lines, 50 fields)  
PAL type color signal  
Video Signal System(NTSC)  
EIA Standard 525 lines, 60 fields)  
NTSC type color signal  
Video Input  
1.0 Vp-p 75 ohms unbalanced  
1.0 Vp-p 75 ohms unbalanced  
More than 43 dB (6H mode)  
Video Output  
Signal to Noise Ratio  
Conventional audio  
Input (LINE)  
-6.0 dBm more than 47 kohms  
-6.0 dBm less than 1.5 kohms  
More than 43 dB (6H mode)  
200 Hz to 10kHz (6H mode)  
Output (LINE)  
S/N Ratio  
Frequency Range  
* Designs and specifications are subject to change without notice.  
* Weight and dimensions shown are approximate.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Krell Industries Stereo Amplifier KAV280p User Manual
Krell Industries Universal Remote KAV 300I User Manual
KWC Indoor Furnishings K27H370000A35 User Manual
LG Electronics Flat Panel Television 19LG3000 ZA User Manual
LG Electronics Telephone aria130 User Manual
Magnavox TV VCR Combo CCB255AT User Manual
Maytag Refrigerator 2007 8 User Manual
Metra Electronics Automobile Accessories 99 9107B User Manual
Meyer Sound Car Speaker UP 4XP User Manual
Micro Innovations Camcorder TravelCam Plus User Manual