Video Surveillance System
with 2 Indoor/Outdoor
Night Vision Cameras
Instruction Manual
English Version 1.0
MODEL:
SHS-2S
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
Important Safeguards
In addition to the careful attention devoted to quality standards in the manufacture process of your video
product, safety is a major factor in the design of every instrument. However, safety is your responsibility too.
This sheet lists important information that will help to assure your enjoyment and proper use of the video
product and accessory equipment. Please read them carefully before operating and using your video product.
Installation
1. Read and Follow Instructions - All the safety and
operating instructions should be read before the
video product is operated. Follow all operating
instructions.
8. Ventilation - Slots and openings in the case are
provided for ventilation to ensure reliable operation
of the video product and to protect it from
overheating. These openings must not be blocked
or covered. The openings should never be blocked
by placing the video equipment on a bed, sofa, rug,
or other similar surface. This video product should
never be placed near or over a radiator or heat
register. This video product should not be placed in
a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the video
product manufacturer’s instructions have been
followed.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings - Comply with all warnings on the
video product and in the operating instructions.
4. Polarization - Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other.
9. Attachments - Do not use attachments unless
recommended by the video product manufacturer as
they may cause a hazard.
Agroundingtypeplughastwoblades
and a third grounding prong.
10. Water and Moisture - Do not use this video product
nearwater. Forexample, nearabathtub, washbowl,
kitchen sink or laundry tub, in a wet basement, near
a swimming pool and the like.
The wide blade or the third prong are
provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet
Caution: Maintain electrical safety. Powerline
operated equipment or accessories connected to
this unit should bear the UL listing mark of CSA
certification mark on the accessory itself and should
not be modified so as to defeat the safety features.
This will help avoid any potential hazard from
electrical shock or fire. If in doubt, contact qualified
service personnel.
5. .Power Sources - This video product should be
operated only from the type of power source
indicated on the marking label. If you are not sure of
the type of power supply to your location, consult
your video dealer or local power company. For video
products intended to operate from battery power, or
other sources, refer to the operating instructions.
11. Accessories - Do not place this video equipment
on an unstable cart, stand, tripod, or table. The video
equipment may fall, causing serious
6. Overloading - Do not overload wall outlets of
extension cords as this can result in the risk of fire
or electric shock. Overloaded AC outlets, extension
cords, frayed power cords, damaged or cracked wire
insulation, and broken plugs are dangerous. They
may result in a shock or fire hazard. Periodically
examine the cord, and if its appearance indicates
damage or deteriorated insulation, have it replaced
by your service technician.
damage to the video product. Use
this video product only with a cart,
stand, tripod, bracket, or table
recommended
by
the
manufacturer or sold with the video
product.Anymountingoftheproduct
should follow the manufacturer’s
instructions and use
a
mounting accessory
recommended by the manufacturer.
7. Power-CordProtection -Powersupplycordsshould
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
paying particular attention to cords at plugs,
convenience receptacles, and the point where they
exit from the video product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
Service
13. Servicing - Do not attempt to service this video
equipment yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
Use
19. Cleaning - Unplug the video product from the wall
outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
20. Product and Cart Combination - Video and cart
combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may
cause the video product and car combination to
overturn.
14. Conditions Requiring Service - Unplug this video
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions.
21. Object and Liquid Entry - Never push objects for
any kind into this video product through openings as
they may touch dangerous voltage points or
“short-out” parts that could result in a fire or electric
shock. Never spill liquid of any kind on the video
product.
A. When the power supply cord or plug is
damaged.
B. If liquid has been spilled or objects have fallen
into the video product.
C. If the video product has been exposed to rain
or water.
22. Lightning - For added protection for this video
product during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the video product due to lightning and power line
surges.
D. If the video product does not operate normally
by following the operating instructions. Adjust
only those controls that are covered by the
operating instructions. Improper adjustment of
other controls mayresult in damage and will often
require extensive work by a qualified technician
to restore the video product to its normal
operation.
E. If the video product has been dropped or the
cabinet has been damaged.
F. When the video product exhibits a distinct
change in performance. This indicates a need for
service.
15. Replacement Parts - When replacement parts are
required, have the service technician verify that the
replacements used have the same safety
characteristics as the original parts. Use of
replacements specified by the video product
manufacturercanpreventfire, electricshockorother
hazards.
16. Safety Check - Upon completion of any service or
repairs to this video product, ask the service
technician to perform safety checks recommended
by the manufacturer to determine that the video
product is in safe operating condition.
17. Wall or Ceiling Mounting - The cameras provided
with this system should be mounted to a wall or
ceiling only as instructed in this guide, using the
provided mounting brackets.
18. Heat - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Precautions
NOTE
This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it
is designated to provide reasonable protection against interference and will not cause interference with other appliance
usage.
However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in
damage to the unit, electrical shock and fire hazard injury
In order to improve the feature functions and quality of this product, the specifications are subject to change without
notice from time to time.
FCC CLASS B NOTICE
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception (which can be determined by turning the equipment on
and off), the user is encouraged to try to correct the interference by one or more of the following measures:
z
z
z
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
z
Consult the dealer or an experienced radio or television technician for assistance
General Precautions
1. All warnings and instructions of this manual should be followed
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth
for cleaning
3. Do not use this unit in humid or wet places
4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked
5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, antenna, and cables
to protect the unit from electrical surge
LOREX TECHNOLOGY INC.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SHS-2S FEATURES
SHS-2S FEATURES
• 2 Channel Camera Switcher
• Automatic/Manual switch over two channel
• PIR Motion Sensor and sound activation alarm function *
• Intercom Feature: Press the Intercom button for 2 way communication between the base
station and the cameras
• Adjustable sound trigger level
• Adjustable auto scanning time for 2s, 5s and 10s
• Adjustable alarm time from 5 - 30 s
• 6 Pin Mini DIN input for any LOREX CMOS/CCD observation camera
• Easy installation
• Easy Setup (connects to any TV, VCR or Monitor) makes this security system perfect for
protecting your home, family and personal property
• PIR Motion Sensor feature notifies you when motion is detected through the PIR Motion
Sensor (Optional)
• 2 Indoor/Outdoor Night Vision Color Cameras allow you to monitor multiple locations in and
around your home with both video and audio
* Functions with the addition of a Lorex PIR Accessory or PIR Camera - not included.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents
Important Safeguards ............................................................................ 3-4
General Precautions ................................................................................. 5
SHS2S - Rear View ................................................................................ 11
SHS-2S Cameras ................................................................................... 12
Installation Warnings: ................................................................................................................ 13
Camera Stand Installation: ........................................................................................................ 13
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
The SHS-2S comes with the following components:
2-Channel Camera
Switcher
2 x 57’ DIN Extension
Cables
2 x Weatherproof Color
Day/Night IR Cameras
AV Cable
Swticher Power Adapter
CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE
SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SHS-2S - Front View
SHS-2S - Front View
1
2
3
4
5
6
1. MULTICOLORED LED INDICATORS- Three LED indicators with different colors:
• Green - Indicates the Power Status (On/OFF)
• Yellow - Indicates the Alarm Status (Alarm Detected)
• Orange - Indicates the Intercom Status (Intercom is ON/OFF)
2. AUTO/MANUAL SCAN BUTTON - Scans through the available cameras. When the switcher
is initially powered on, the scan type is set to AUTO and will cycle through all available cameras
(CAM1-CAM2), displaying one image at a time. The GREEN LED indicator will be ON or flashing
to indicate the switcher is in AUTO SCAN mode.
The AUTO SCAN has a default of 2 seconds per channel. To change this setting, press and
hold the CAM SELECT button for 2 seconds to set the preferred duration:
z
z
z
2 Second Display Interval - The GREEN LED is solid
5 Second Display Interval - The GREEN LED will flash (fast flash)
10 Second Display Interval - The GREEN LED will flash (slow flash)
To view a specific camera, press the AUTO/MANUAL button to set the switcher to Manual
mode (The GREEN LED will be OFF). Individual cameras can be viewed by pressing the CAM
SELECT button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SHS-2S - Front View
SHS-2S - Front View
1
2
3
4
5
6
3. PIR / AUDIO TRIGGER - Sets the Alarm Type to PIR Only (Alarm will be triggered when motion
is detected by the PIR), Audio (Alarm will trigger when the built-in microphone detecs a sound
level exceeding the set level), PIR+AUDIO (Alarm will trigger when the PIR / Audio sensors are
triggered), or the alarm can be set to OFF.
NOTE: The PIR Functionality ONLY works with PIR Cameras or with the Camera PIR
Accessory. Not included with the SHS-2S.
4. BUZZER ON/OFF - Turns the Alarm buzzer ON or OFF
5. CAMERA SELECT - Switches between CAM1 and CAM2
6. INTERCOM & MICROPHONE - Enables 2-way communication between the Cameras and the
SHS-2S Switchbox (through TV/Monitor speaker).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SHS2S - Side View
SHS2S - Side View
1
2
3
1. AUDIO SENSITIVITY 2 - Sets the Audio Sensitivity for CAM2 from Low to High by moving the
switch left or right.
2. AUDIO SENSITIVITY 1 - Sets the Audio Sensitivity for CAM1 from Low to High by moving the
switch left or right.
3. ALARM TIME DURATION - Sets the Alarm Time Duration from 5 Seconds to 30 seconds by
moving the switch left or right.
SHS-2S - Rear View
1
2
3
1. CAM1 - CAM2 DIN INPUTS - Camera inputs (for cameras with 6 pin DIN
connection).
2. DIN OUTPUT - Connects the DIN A/V cable to a TV/Monitor.
3. DC 15V - Connects the 15V DC Power adapter
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SHS-2S Cameras
SHS-2S Cameras
The SHS-2S switcher includes 2 CMOS Color IR Day/Night Indoor/Outdoor Cameras*
INFRA-RED LEDs -
Provides illumination for low
light conditions
CAMERA LENS
MICROPHONE -
Picks up sound near the
camera and transmits to the
SHS-2S switcher
STAND -
Stand connects to the
Camera for mounting to
walls, ceilings and other
surfaces
INPUT CABLE -
Connects Video / Audio /
Power from the SHS-2S
switcher to the Camera
* Picture changes from Color to B&W under low light conditions.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Installation
Camera Installation
Before you install the camera, carefully plan where and how you will position the camera, and
where you will route the cable that connects the camera to the SHS-2S switcher.
Installation Warnings:
• Select a location for the camera that provides a clear view of the area you want to monitor,
which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.
• Plan the cables’ route so that it is not close to power or telephone lines, transformers,
microwave ovens or other electrical equipment that could interfere with the system.
• Select a location for the camera that has an ambient temperature between 14°F~113°F
(-10°C~45°C)
• If you plan to install the camera in a location that has conditions not recommended in this
manual, consult with a professional installer and consider use of a separate camera cover
or housing
• Before starting permanent installation, have another person hold the camera for you while
you verify its performance by observing the image on the monitor.
Camera Stand Installation:
1. Attach the pedestal to the
ceiling, wall or other surface by
the base using the provided
screws.
2. The mounting bracket must be
attached to a structural device
such as a wall stud or ceiling rafter
using the supplied screws.
3. Attach the camera to the pedestal.
Adjust the angle of the camera,
and tighten the thumbscrew to set
the position
NOTE: The Camera can be attached to the stand using the screw point on
the top or the bottom (to maintain proper camera alignment). This prevents
the image from becoming inverted.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Installation
Connecting Cameras
1. Connect the female end of the supplied 57’ extension cable to the camera.
NOTE: Confirm that the arrows
on the DIN Camera Cable and the
DIN Extension cable are pointed
together when connecting the
cable. If the pins in the DIN Cable
are bent, the Camera will NOT
function.
2. Connect the male end of the supplied 57’ extension cable to an open camera input on the back
of the SHS-2S switcher. Continue connecting additional DIN cameras.
NOTE: The arrow on the DIN
Camera should be facing up
when connecting the DIN
Extension Cable to the
SHS-2S switcher.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the SHS-2S A/V Cable
Connecting the SHS-2S A/V Cable
Connect the DIN end of the A/V Cable to the SHS-2S Switcher. Connect the RCA Video and
Audio cables to the TV, VCR or Monitor.
TV / VCR / MONITOR
Connect the Yellow AV Cable end
to an available video port, and the
White AV Cable end to an available
audio port.
SHS-2S
Connect the DIN Cable end to the
OUTPUT port
Connectivity Diagram
TV / VCR / MONITOR
2 x CAMERAS & 57’
EXTENSION CABLE
POWER
ADAPTER
A/V CABLE
SHS-2S SYSTEM
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SHS-2S System Specifications - Appendix #1
SHS-2S System Specifications - Appendix #1
Control Box Specifications
Channels
2
Alarm Time
Scan Time
Operating Voltage
Camera Input
AV Output
5 to 30 seconds
2, 5 or 10 seconds
15V DC 500mA
2 DIN
1 DIN
Camera Specifications
Image Sensor
Input Voltage
Lens Angle
Color CMOS
12V DC
90° (Diagonal)
330 TV Lines
Resolution
Minimum Illumination
3 LUX IR LED Off
0 LUX IR LED On
IR LEDs
850nm
Operating Temperature
14°F~ 113° F (-10°C ~ 45° C)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
It’s all on the web
Product Information
Specification Sheets
Software Upgrades
Firmware Upgrades
User Manuals
Quick Start Guides
VISIT
Strategic Vista International Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|