1/3” CCD COLOR PAN / TILT
DOME CAMERA
WITH 3x DIGITAL ZOOM
Instruction Manual
English Version1.0
MODEL:
SG7381
Copyright © 2007 Lorex Technology Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
General Precautions
General Precautions
1. All warnings and instructions of this manual should be followed
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water
dampened cloth for cleaning
3. Do not use this unit in humid or wet places
4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should
not be blocked
5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply,
antenna, and cables to protect the unit from electrical surge
FCC CLASS B NOTICE
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not in-stalled and used in accordance with the instruction, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception (which can be determined
by turning the equipment on and off), the user is encouraged to try to correct the interference by one
or more of the following measures:
o
o
o
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected
o
Consult the dealer or an experienced radio or television technician for assistance
This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and
LVD. Therefore, it is designated to provide reasonable protection against interference and will not
cause interference with other appliance usage.
However, it is imperative that the user follows this manuals guideline to avoid improper usage which
may result in damage to the unit, electrical shock and fire hazard injury
In order to improve the feature functions and quality of this product, the specifications are subject to
change without notice from time to time.
LOREX TECHNOLOGY INC.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents
Camera Features .................................................................................................. 4
Getting Started ...................................................................................................... 5
Camera Connections – DIN Cable........................................................................ 6
DIN – Port Pins..........................................................................................................................................6
Camera Connections – DIN to BNC / RS-485 Adaptor Cable .............................. 7
Observation System / DVR Connections .............................................................. 7
Observation System / DVR Connections (cont.)................................................... 8
Connectivity Diagram ................................................................................................................................8
Changing the Camera Address Settings............................................................... 9
DIP Switch Address Chart.........................................................................................................................9
Calculating the DIP Switch Addresses....................................................................................................10
Technical Specifications...................................................................................... 11
Dimensions..............................................................................................................................................11
Camera Features
• High Resolution Color CCD camera
• 480 lines, 1.0 lux
• Indoor Pan/Tilt Dome System
• Supports PELCO-D Protocol
• Auto Pan -330°, Auto Tilt -90°
• 3x Digital Zoom
• Light Weight, Compact Size
• 6 pin DIN connection & BNC / RS-485 Adaptor
• Smoked housing provides unobtrusive appearance
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
The system comes with the following components:
1 x MINI COLOR PAN / TILT
DOME CAMERA
1 x 60’ DIN EXTENSION
CABLE
1 x MOUNTING BRACKET
1 x DIN TO BNC / RS-485
ADAPTOR CABLE
1 x HARDWARE MANUAL
1 x POWER ADAPTOR FOR
DIN TO BNC ADAPTOR
CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE
SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Connections – DIN Cable
Camera Connections – DIN Cable
NOTE: Visit us on the web at http://www.lorexcctv.com for a full list of compatible Observation Systems.
Before installation make sure that:
•
•
You have the proper lift equipment or ladder to reach the installation location.
Electrical power is not connected to the dome camera and surveillance monitor during installation.
DIN Installation
NOTE: The camera will only work on CHANNEL 1 when using the DIN Cable connection.
1.) Connect the 60 ft Din cable (included with the dome camera) to the wired lead of the dome camera.
NOTE: Confirm that the arrows on the DIN Camera Cable and the
DIN Extension cable are pointed together when connecting the
cable. If the pins in the DIN Connector are bent, the Camera will
NOT function.
2.) Attach the adaptor plate on the ceiling using the 3screws
provided (M3X20 screw). The mounting bracket must be attached to a structural object, such as a ceiling
rafter which will support the weight of the camera.
3.) Twist the base of the dome camera on to the adaptor plate on the ceiling. Do not hold the clear plastic
bubble or swivel when you attach the dome to the adapter plate.
4.) Connect the other end of the 60 ft cable to the CH1 DIN Camera Input on the back of the Observation
System (the System must include a Pelco-D Pan/Tilt Zoom feature).
5.) Turn on the Observation System.
Camera
DIN Extension
Cable
Observation
System Ports
DIN – Port Pins
A. Video Input
B. Audio Out
C. NC (Not Connected)
D. B+ 12V ( Power )
E. Audio Input
F. Camera Audio AMP: B+ 12V ( Power )
G. Ground
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Connections – DIN to BNC / RS-485 Adaptor Cable
Camera Connections – DIN to BNC / RS-485 Adaptor Cable
NOTE: The camera will work on a BNC channel when using the Adaptor Cable. Please refer to the
Observation System User manual for details on available channels for PTZ functionality.
1.) Connect the 60 ft Din cable (included with the dome camera) to the wired lead of the dome camera.
NOTE: Confirm that the arrows on the DIN Camera Cable and the
DIN Extension cable are pointed together when connecting the
cable. If the pins in the DIN Cable are bent, the Camera will NOT
function.
2.) Attach the adaptor plate on the ceiling, using the 3screws provided (M3X20 screw). The mounting
bracket must be attached to a structural object, such as a ceiling rafter which will support the weight of the
camera.
3.) Twist the base of the dome camera on to the adaptor plate on the ceiling. Do not hold the clear plastic
bubble or swivel when you attach the dome to the adapter plate.
4.) Connect the other end of the 60 ft cable to the BNC / RS-485 Adaptor Cable.
5.) Connect the leads from the Adaptor cable to the inputs on the back of the Observation System (the
Observation System must include a Pelco-D Pan/Tilt Zoom feature).
Connect to Power Adaptor
Connect to BNC Input
Connect to RS-485 Input
5.) Turn on the Observation System or DVR.
Observation System / DVR Connections
Connect to RS-485
Connections:
White: + (positive)
Black: - (negative)
Connect to Power
Adaptor
Connect to BNC Input.
Note: BNC Adaptors and/or RCA Cable may be needed for some systems
(as shown above).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Observation System / DVR Connections (cont.)
Observation System / DVR Connections (cont.)
Connecting to RS-485 (PTZ):
Connections:
White: RS-485 +
Black: RS-485 -
Note: Additional settings are required on the Observation System (to control the
PTZ). Please refer to the Observation System Hardware Manual for menu details
Connecting to BNC:
The BNC end of the cable may be connected directly
to the back of the Observation System or DVR. In
some cases, adaptors may be needed for
connection.
BNC to RCA Adaptor
RCA Cable
BNC to RCA Adaptor
Connectivity Diagram
Camera
DIN Extension
Cable
DIN to BNC / RS-485
Cable
Power Adaptor
Observation System / DVR
RS-485
BNC Port
(PTZ) Port
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Camera Address Settings
Changing the Camera Address Settings
NOTE: This is only applicable when using the BNC Adaptor cable. CH1 is the only available channel if
using the DIN Connection.
The DIP switches inside the camera can be changed to set a unique address for the Camera (set to 1 by
default). The address range is between 1~255:
•
•
If using a single camera, the address does not need to be changed. Refer to the Hardware
Manual for the Observation System for camera channel placement and configuration.
If using multiple cameras, each camera must be set to a unique address using the internal DIP
switches. The DIP switches shown below.
To access the DIP switches:
1. Remove the Dome Cover.
2. Use the chart below to set the desired address. Set the dip switches (ON is up; OFF is down)
using a paperclip or other pointed tool.
Default Configuration: Switch 1 is ON, and
all other switches are off. The address is ‘1’
DIP Switch Address Chart
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Camera Address Settings
DIP Switch Address Chart (cont…)
Calculating the DIP Switch Addresses
Each switch in the block has a specific associated value. When the switch is turned ON, the value is
added to the total.
Switch #
Value
Ex. 1
Ex. 2
Ex. 3
1
1
off
2
2
3
4
4
8
off
off
ON
5
6
7
8
9
N/A
-
-
-
10
N/A
-
-
-
Address
16
ON
off
ON
32
off
ON
off
64
off
ON
off
128
off
off
ON
ON off
18
103
153
ON ON ON
ON off off
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Technical Specifications
1/3” Interline Transfer Color CCD
Image Sensor
Effective Pixels
Scanning System
Scanning Frequency
Horizontal Resolution
Lens
768K (H) x 494K (V)
525 Lines, 2:1 Interlace
15.734 KHz (H) x 59.94Hz (V)
480 TV Lines
3.8 mm
1/60 ~ 1/100,000 sec.
More than 48dB
3x
Pan 50° /sec.
Tilt 40° /sec.
Shutter Speed
S/N Ratio
Digital Zoom Ratio
Pan / Tilt Speed
Pan maximum 330°
Tilt maximum 90°
Pelco-D
Pan / tilt Travel
PTZ Protocol
2400
1.0 lux (F1.2)
1.0V p-p ( 75 ohms )
Baud Rate Supported
Minimum Illumination
Video Output
Power Requirement
•
•
From monitor via cable (when using DIN only)
From power adaptor (when using the DIN to BNC /
RS-485 Adaptor cable).
14 °F – 122°F
-10°C to 50°C
Operating Temperature
90% RH Max
Operating Humidity
Dimensions
4.21” (W) x 4.35” (H) x 4.21” (D)
107mm (W) x 110.5mm (H) x 107mm (D)
2.5 lbs
Weight
1.1 kg
Black – ABS Plastic
Housings
Connections
•
•
6 pin DIN -OR-
BNC with RS-485 Adaptor and Power Adaptor
Dimensions
As our products are subject to continuous improvement, LOREX Technology Inc. and its subsidiaries
reserve the right to modify product design, specifications and prices, without notice and without
incurring any obligation. E&OE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|