Wireless 4 Channel Receiver
with 2 Night Vision cameras
Instruction Manual
English Version 3.0
MODEL:
SHS-4WLS
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
Important Safeguards
In addition to the careful attention devoted to quality standards in the manufacture process of your video
product, safety is a major factor in the design of every instrument. However, safety is your responsibility too.
This sheet lists important information that will help to assure your enjoyment and proper use of the video
product and accessory equipment. Please read them carefully before operating and using your video product.
Installation
1. Read and Follow Instructions - All the safety and
operating instructions should be read before the
video product is operated. Follow all operating
instructions.
8. Ventilation - Slots and openings in the case are
provided for ventilation to ensure reliable operation
of the video product and to protect it from
overheating. These openings must not be blocked
or covered. The openings should never be blocked
by placing the video equipment on a bed, sofa, rug,
or other similar surface. This video product should
never be placed near or over a radiator or heat
register. This video product should not be placed in
a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the video
product manufacturer’s instructions have been
followed.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings - Comply with all warnings on the
video product and in the operating instructions.
4. Polarization - Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other.
9. Attachments - Do not use attachments unless
recommended by the video product manufacturer as
they may cause a hazard.
Agroundingtypeplughastwoblades
and a third grounding prong.
10. Water and Moisture - Do not use this video product
nearwater. Forexample, nearabathtub, washbowl,
kitchen sink or laundry tub, in a wet basement, near
a swimming pool and the like.
The wide blade or the third prong are
provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet
Caution: Maintain electrical safety. Powerline
operated equipment or accessories connected to
this unit should bear the UL listing mark of CSA
certification mark on the accessory itself and should
not be modified so as to defeat the safety features.
This will help avoid any potential hazard from
electrical shock or fire. If in doubt, contact qualified
service personnel.
5. .Power Sources - This video product should be
operated only from the type of power source
indicated on the marking label. If you are not sure of
the type of power supply to your location, consult
your video dealer or local power company. For video
products intended to operate from battery power, or
other sources, refer to the operating instructions.
11. Accessories - Do not place this video equipment
on an unstable cart, stand, tripod, or table. The video
equipment may fall, causing serious
6. Overloading - Do not overload wall outlets of
extension cords as this can result in the risk of fire
or electric shock. Overloaded AC outlets, extension
cords, frayed power cords, damaged or cracked wire
insulation, and broken plugs are dangerous. They
may result in a shock or fire hazard. Periodically
examine the cord, and if its appearance indicates
damage or deteriorated insulation, have it replaced
by your service technician.
damage to the video product. Use
this video product only with a cart,
stand, tripod, bracket, or table
recommended
by
the
manufacturer or sold with the video
product.Anymountingoftheproduct
should follow the manufacturer’s
instructions and use
a
mounting accessory
recommended by the manufacturer.
7. Power-CordProtection -Powersupplycordsshould
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
paying particular attention to cords at plugs,
convenience receptacles, and the point where they
exit from the video product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
Service
13. Servicing - Do not attempt to service this video
equipment yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
Use
19. Cleaning - Unplug the video product from the wall
outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
20. Product and Cart Combination - Video and cart
combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may
cause the video product and car combination to
overturn.
14. Conditions Requiring Service - Unplug this video
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions.
21. Object and Liquid Entry - Never push objects for
any kind into this video product through openings as
they may touch dangerous voltage points or
“short-out” parts that could result in a fire or electric
shock. Never spill liquid of any kind on the video
product.
A. When the power supply cord or plug is
damaged.
B. If liquid has been spilled or objects have fallen
into the video product.
C. If the video product has been exposed to rain
or water.
22. Lightning - For added protection for this video
product during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the video product due to lightning and power line
surges.
D. If the video product does not operate normally
by following the operating instructions. Adjust
only those controls that are covered by the
operating instructions. Improper adjustment of
other controls mayresult in damage and will often
require extensive work by a qualified technician
to restore the video product to its normal
operation.
E. If the video product has been dropped or the
cabinet has been damaged.
F. When the video product exhibits a distinct
change in performance. This indicates a need for
service.
15. Replacement Parts - When replacement parts are
required, have the service technician verify that the
replacements used have the same safety
characteristics as the original parts. Use of
replacements specified by the video product
manufacturercanpreventfire, electricshockorother
hazards.
16. Safety Check - Upon completion of any service or
repairs to this video product, ask the service
technician to perform safety checks recommended
by the manufacturer to determine that the video
product is in safe operating condition.
17. Wall or Ceiling Mounting - The cameras provided
with this system should be mounted to a wall or
ceiling only as instructed in this guide, using the
provided mounting brackets.
18. Heat - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Precautions
NOTE
This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it
is designated to provide reasonable protection against interference and will not cause interference with other appliance
usage.
However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in
damage to the unit, electrical shock and fire hazard injury
In order to improve the feature functions and quality of this product, the specifications are subject to change without
notice from time to time.
FCC CLASS B NOTICE
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception (which can be determined by turning the equipment on
and off), the user is encouraged to try to correct the interference by one or more of the following measures:
z
z
z
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
z
Consult the dealer or an experienced radio or television technician for assistance
General Precautions
1. All warnings and instructions of this manual should be followed
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth
for cleaning
3. Do not use this unit in humid or wet places
4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked
5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, antenna, and cables
to protect the unit from electrical surge
LOREX TECHNOLOGY INC.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents
Important Safeguards ............................................................................... 3
General Precautions ................................................................................. 5
SHS-4WLS Features ................................................................................ 6
Receiver Specifications ............................................................................................................. 13
SHS-4WLS Features
• Complete DIY Wireless Video Security System with 2 cameras
• Easily connects to any TV, VCR or Monitor
• Weather Resistant Night Vision Cameras with built in Microphone
• Cameras can be placed up to 330ft from the receiver*
* 330ft is the Maximum open space transmission range. Actual
range dependent upon building materials and other obstructions in
path of wireless signal.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
The SHS-4WLS comes with the following components:
2 x Weatherproof Color
Day/Night IR Cameras
with Stands
4-Channel Wireless
Receiver
Remote Control
AV Cable
Receiver Power Adapter
2 x Camera Power Adapters
CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE
SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SHS-4WLS - Front View
SHS-4WLS - Front View
ANTENNA
CHANNEL BUTTON -
Press to cycle through available
cameras.
LED CHANNEL DISPLAY -
Shows the currently displayed
channel number.
IR
SIGNAL
RECEIVING
WINDOW -
Receives the Infrared signal
from the Remote Control.
SHS-4WLS - Rear View
POWER JACK
VIDEO OUTPUT
AUDIO OUTPUT (LEFT)
AUDIO OUTPUT (RIGHT)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Remote Control
Listed below is a quick reference for the Remote Control.
CHANNEL BUTTONS -
Press to choose a specific
camera by number:
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
LOCK / UNLOCK BUTTON -
Locks the SHS system against
accidental button press on the
Remote Control.
Press the button once to
LOCK or UNLOCK the
SHS-4WLS system.
LOOPING BUTTON -
Sets LOOPING display:
1. Press the button once
to enable LOOPING.
2. Press buttons 1~4 to
input two or more
channels to be looped
3. Press the button once
more
to
set
the
LOOPING Sequence.
CHANNEL UP / DOWN -
Increments the channel (1~4) or
decrements the channel (4~1)
Decrement
Increment
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SHS-4WLS Cameras
SHS-4WLS Cameras
The SHS-4WLS switcher includes 2 CMOS Color Indoor/Outdoor Wireless Cameras*
INFRARED-RED LEDs -
Provides illumination for low
light conditions
CAMERA LENS
MICROPHONE
STAND -
Metal stand connects to the
Camera for mounting to
walls, ceilings and other
surfaces
POWER CABLE (BACK) -
Connects power to the
camera via the power
adapter
MICROPHONE SWITCH -
The default Microphone
Switch is “On”.
* Picture changes from Color to B&W under low light conditions on Night Vision Cameras Only.
Installation Warnings:
• Before you install the camera, carefully plan where and how you will position the camera, and
where you will route the cable that connects the camera to an electrical outlet.
• Select a location for the camera that provides a clear view of the area you want to monitor,
which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.
• Plan the camera location so that it is not close to power or telephone lines, transformers,
microwave ovens or other electrical equipment that could interfere with the system.
• Select a location for the camera that has an ambient temperature between 14°F~113°F
(-10°C~45°C)
• Before starting permanent installation, have another person hold the camera for you while
you verify its performance by observing the image on the monitor.
•Thisproductbroadcastsoverpublicairwaysanditsvideoandaudiosignalsmaybeintercepted
without your consent.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the SHS-4WLS A/V Cable
Connecting the SHS-4WLS A/V Cable
Connect the Video and Audio Cables to the matching color ports on the SHS-4WLS Switcher.
Connect the cable to the TV, VCR or Monitor.
TV / VCR / MONITOR
Connect the Video and Audio Cables
to the matching color ports.
SHS-4WLS
Connect the Video and Audio Cables
to the matching color ports.
Connectivity Diagram
TV / VCR / MONITOR
2 x CAMERAS &
POWER ADAPTERS
POWER
ADAPTER
A/V CABLE
SHS-4WLS SYSTEM
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SHS-4WLS System Specifications - Appendix #1
SHS-4WLS System Specifications - Appendix #1
Receiver Specifications
Receiving Frequency
ISM 2,400 MHz ~ 2,483 MHz
480 MHz / FM
Intermediate Frequency /
Demodulation Type
Antenna
Patch Antenna
Receiving Sensitivity
Video Output Signal Level
Audio Output Signal Level
Power Supply
< -85 dBm
1.0 V @ 75ohm, S/N>38dB
1.0 V @ 600ohm
12V DC / 300mA
Unobstructed Effective Range
Dimensions (W x D x H)
300 ft. (100m) (Maximum)
4” x 5.7” x 1.7”
106mm x 146mm x 43mm (excluding antenna)
7.8oz (222g)
Weight
Operating Temperature
Operating Humidity
14°F ~ 122°F (-10°C ~ 50°C)
85% RH
Camera Specifications
Image Sensor
CMOS (510 x 492 NTSC
0 LUX
Minimum Illumination
Transmission Frequency
Transmission Power
Bandwidth
ISM 2,400 MHz ~ 2,483 MHz
2mW/FCC
18 MHz
Modulation Type
FM
Power Supply
8V DC / 200mA
Unobstructed Effective Range
NIght Vision Range
Dimensions (W x D x H)
300 ft. (100m) (Maximum)
15 ft. (4.6m)
1.8” x 3” x 3.3”
45mm x 78mm x 83mm (including stand)
7.6oz. (217g)
Weight
Operating Temperature
Operating Humidity
14°F ~ 122°F (-10°C ~ 50°C)
85% RH
12
Download from Www.Somanuals.com. All Manuals Search And Download.
It’s all on the web
Product Information
Specification Sheets
Software Upgrades
Firmware Upgrades
User Manuals
Quick Start Guides
VISIT
Lorex Technology Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|