WASHING MACHINE
SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLES
CORRECTLY BEFORE OFFERING SERVICE.
MODEL : WD-1433RD
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1. SPECIFICATION............................................................................................................................3
2. FEATURES & TECHNICAL EXPLANATION ................................................................................ 4
3. PARTS IDENTIFICATION ............................................................................................................ 6
4. INSTALLATION............................................................................................................................. 7
5. OPERATION................................................................................................................................10
6. WIRING DIAGRAM / PROGRAM CHART...................................................................................12
7. TROUBLE SHOOTING................................................................................................................13
7-1.BEFORE SVC CHECKING..................................................................................................13
7-2.QC TEST MODE..................................................................................................................13
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY.........................................................13
7-4.ERROR DISPLAY ................................................................................................................14
8. ERROR DIAGNOSIS AND CHECK LIST ....................................................................................16
8-1. DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION...........................................16
8-2. FAULT DIAGNOSIS AND TROUBLE SHOOTING .............................................................19
9. DISASSEMBLY INSTRUCTIONS ...............................................................................................29
10. EXPLODED VIEW AND PARTS LIST .......................................................................................39
10-1. THE EXPLODED VIEW OF CABINET ASSEMBLY .........................................................39
10-2. THE EXPLODED VIEW OF CONTROL PANEL AND DISPENSER ASSEMBLY ............40
10-3. THE EXPLODED VIEW OF DRUM AND TUB ASSEMBLY .............................................41
10-4. THE EXPLODED VIEW OF DRYER ................................................................................42
APPENDIX (Replacement parts list)...........................................................................................43
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. SPECIFICATION
ITEM
WD-1433RD
POWER SUPPLY
PRODUCT WEIGHT
WASHING
220V-240V~, 50HZ
61kg
135W
ELECTRICITY
SPIN
FAN MOTOR
DRAIN MOTOR
WASH HEATER
DRY HEATER
WASH
530W
CONSUMPTION
25W
32W
2000W
1200W
45rpm
REVOLUTION
SPEED
SPIN
WD-1433RD
WD-1233RD
400/600/800/1000/1200/1400 rpm
400/600/800/1000/1200 rpm
0.3-10kgf/cm2 (30-1000kPa)
OPERATION WATER PRESSURE
CONTROL TYPE
Electronic
7.0kg (Cotton)
WASH CAPACITY
DRY CAPACITY
4.0kg (Cotton)
DIMENSION
600mm(W) 550mm(D) 850mm(H)
WASH PROGRAM
OPTION
Cotton, Cotton-Eco, Synthetic, Delicate, Wool/Silk, Hand Wash, Quick 30
+
Intensive, Rinse Hold, Rinse , Pre Wash, Dry
DOOR SWITCH TYPE
WATER LEVEL
Bi-Metal type
9 steps (by sensor)
From 3 hours to 19 hours
Adapted
RESERVATION
SENSING OF THE LAUNDRY AMOUNT
FUZZY LOGIC
Adapted
DISPLAY OF THE REMAINING TIME
ERROR DIAGNOSIS
POWER AUTO OFF
CHILD LOCK
Adapted
10 items
Adapted
Adapted
AUTO RESTART
Adapted
TIME SAVE
Adapted
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. FEATURES & TECHNICAL EXPLANATION
2-1.FEATURES
Automatic process from washing to drying.
Automatic process from washing to drying can be
selected easily.
Washing capacity : 7 kg (Cotton)
Drying capacity : 4 kg (Cotton)
More economical by Intelligent Wash System
Intelligent Wash System detects the amount of load and water
temperature, and then determines the optimum water level and
washing time to minimize energy and water consumption.
Direct Drive system
The advanced Brushless DC motor rotates the Drum directly
without belt and pulley.
Child-Lock
The Child-Lock system has been developed to prevent
children from pressing any button to change the program
during operation.
Low noise speed control system
By sensing the amount of load and balance, evenly distributes
load to minimize the spinning noise level.
Auto Restart
Although the washing machine is turned off by a power failure, it
restarts automatically in its stopped process when power is
supplied again. And it will be the same when the machine
unplugged in operation is plugged in again.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature,
selected washing temperature and laundry amount.
water
temperature
washing time
the best
washing
performance
selected
FUZZY
LOGIC
washing
rinsing time
temperature
spin rhythm, time
laundry
amount
SENSING
PROCESSING
DETERMINATION
EFFECT
2-3.WATER LEVEL CONTROL
This model adopts a pressure sensor which can sense the water level in the tub.
Water supply is stopped when the water level to the preset level, then washing program proceeds.
Spinning does not proceed until the water in the tub reduces to a certain level.
2-4.THE DOOR CAN NOT BE OPENED
While program is operating.
While Door Lock light turns on.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. PARTS IDENTIFICATION
tton
o
C
C
Eco
te
a
lic
e
D
ACCESSORIES
Spanner
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. INSTALLATION
Before servicing ask troubles of customers
Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O Kor NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
BOLTS
INSTALL THE APPLIANCE
ADJUST THE
HORIZONTAL
ON FLAT AND FIRM SURFACE
Remove the transit bolts
Turn the leveling feet to
(4EA: )with supplied spanner.
set the appliance horizontally.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
provided into the hole
Low
High
The appliance goes up by
rotating the feet clockwise.
1
The appliance come down by
rotating the feet counter
clockwise.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
Make sure that the hose is not twisted.
Avoid submerging the end of the hose.
The drain hose should be placed under 100cm from the floor.
CONNECT POWER PLUG
Avoid connecting several electric devices,
It may be the cause of the fire.
Connect the power plug to the wall outlet.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TEST OPERATION
Preparation for
washing.
Press the POWER button.
Press the Start/Pause
button.
Connect the power plug to
the outlet.
In case of Coloreds program.
Check the water supply.
Connect the inlet hose.
Check the water heating.
Check automatic reverse
turn.
Press the Time Delay and Rinse
Hold buttons simultaneously and
the present temperature will be
displayed.
Check if the drum rotates
clockwise and counterclockwise.
Check if water is supplied
through the detergent
dispenser.
Check drain and spin
Power off and open the
door
Water removal
Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Power off and then power on.
Check if the door can be
opened after 3 minutes.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5. OPERATION
Wash program selector
LED display
8 program can be set depending on the type of the laundry.
If the power button is pressed, Cotton program is automatically
set.
Display the estimated remaining time
(Hour : Minute) to finish.
In case of abnormal operation, error
indications are displayed.
By turning the dial, [Cotton
Drain Rinse+Spin Quick 30
(The opposite is possible)
-Synthetic
-
Wool/Silk
-
Hand Wash
-
(
)
-
-
-
Delicate ]can be selected.
See troubleshooting guide.
Water temperature selector
Press the button to select water
temperature.
95 C is selected for Cotton only.
By pressing the button while
operating the washer, the present
temperature is displayed.
Intensive
Rinse Hold
Start/Pause button
• If the laundry is heavily
soiled “Intensive” option
is effective.
• By selecting the
Intensive option, the
wash time may be
• Is selected by pressing the Rinse Hold
button this function leaves clothes in
the machine; suspended in the water
after a rinse without entering into spin.
• To proceed through to a drain or spin,
once the rinse hold function is
Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
extended, depending on
the program selected.
completed using to program dial scroll
to the required program. (Spin)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Delay
Spin button
Power button
Press the button when delayed washing is
needed.
By pressing the Spin
button the spin speed
can be chosen.
Press the button to turn
power on and off.
Press the button to
cancel the delay finish.
When the button is pressed,
is displayed,
maximum delay of
hours can be set.
Each press advances time delay by the hour.
Use [Power] button to cancel [Time Delay]
[Time Delay] means the time required from the
present to the completion of washing.
Child - Lock
Child Lock system can be set and
canceled by pressing and holding both
+
[Rinse ] and [Pre Wash] buttons
simultaneously more than 2 seconds.
Once Child Lock is set, all buttons
are inoperable except power button.
Child Lock system can be set
anytime even during Power-off and
operation.
It is automatically cancelled when an
operational error occur.
+
Rinse
Pre Wash
Dry
• For additional rinse
which may assist in
removing traces of
detergent residue.
• By selecting Rinse+
function, the rinse time
and the rinse water are
increased.
• If the laundry is heavily
soiled, “Pre Wash”
course is effective.
• Pre Wash is available in
Cotton and Synthetic.
• If you want Dry, select this button.
• By pressing the botton [Normal – More – Time –
Low Temp. – Less]
11
Download from Www.Somanuals.com. All Manuals Search And Download.
6. WIRING DIAGRAM / PROGRAM CHART
* Water Supply : W·S
* Intermittent Spin : I·S
* Disentangle : D·T
Washing
Rinse
A
U
T
O
O
F
C
Spin
Y
Pre
Main
Normal
Rinse +
E
N
D
C
Washing Staycooling
1
2
3
4
Normal
Working
Time
(Hour:Minute)
(With Intensive)
L
W
·
W
·
S
I
·
S
W
·
S
W
·
S
W
W
·
S
W
E
I
·
S
I
·
S
I
·
S
I
·
S
·
·
S
T
E
S
C
S
S
F
O
U
R
S
E
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
P
Time 120 MIN
60 240 120
MIN 120 60 60 60 240 120 360 60 240 120 360 60 240 120 360 60 240 120 360 60 480 120 20 20
(SEC)
44
~
87
8
Cotton(BIG)
Cotton(Small)
Synthetic
Delicate
About 2:47
About 2:04
About 1:39
About 1:03
About 1:01
About 55
About 40
About 24
42
8
~
44
26
~
51
4
18
4
Wool/Silk
Handwash
Quick
18
4
24
Rinsing
+ Spin
Drain
About
1
*
*
Basic Cycle
Optional Cycle
* Pre-Setting Time : Water Supply - 120 sec.
Drain 60 sec.
* ~ Time for varies as the temperature or the amount of laundry
* Basic time is minute in washing chart
* The actual program time can be varied with the load amount,
water temperature or ambient temperature
-
12
Download from Www.Somanuals.com. All Manuals Search And Download.
7. TROUBLE SHOOTING
7-1.BEFORE PERFORMING SERVICE
Be careful of electric shock or disconnecting the parts while troubleshooting.
Voltage of each terminal in 220-240V~ and DC while applying an electric current.
7-2.QC TEST MODE.
Press Intensive and Rinse Hold button simultaneously.
Power supply on with pressing upper two buttons.Then buzzer sound twice.
Press the Start/Pause button as follows.
Press the Start/Pause button more 4 times until stop spinning
Pressing number of
Checking Point
Display Status
Start/Pause button
None
1 time
All lamps turn on
Counterclockwise spin (left)
Low speed Spin
Drum rpm (About 40~52)
Drum rpm (About 55~70)
Drum rpm (About 130~143)
Water level frequency (25~65)
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
12 times
High speed Spin
Inlet valve for prewash operation
Inlet valve for mainwash operation
Hot inlet valve in case of hot water fill
Inlet valve for Dry operation
Clockwise spin (right)
Water level frequency (25~65)
Water level frequency (25~65)
Drum rpm (About 40~52)
Water temperature
Wash Heater is in operation for 3 sec.
Dry Heater & Dry fan operation
Dry fan & motor tums on
Auto off operation
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY
Press the Rinse Hold button.
The digits means water level frequency (10-1
-1
)
ex) 241 : Water level frequency = 241 10
=24.1
7-4.HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR
AT OPERATING CONDITION.
I Thermistor in tub : Press the [TIME DELAY] and [RINSE HOLD] button.
I Thermistor in dry duct : Press the [DRY] button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
7-5.ERROR DISPLAY.
If you press the Start/Pause button in error condition, any error except ‘ ’ will disappear and the
machine will change into pause status.
In case o
if the error is not resolved within 20 sec., and in case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in case o
, power will not be turned off.
ERROR
SYMPTOM
CAUSE
WATER INLET
• Not reached to the water level(2 level)within 4
minutes after water supplied or not reached to
the preset water level within 25 minutes.
1
ERROR
DRAIN ERROR
• Not fully drained within 5 minutes.
• Water is over flowing(over 8 level).
2
OVERFLOW
3
ERROR
※If
is displayed, drain pump operates to
drain water automatically.
SENSOR PRESSURE
• The sensor pressure switch is out of order.
4
S/W ERROR
• In case of operating the reservation function or
the other function with door opened. Close the
door, then the error display is resolved.
• The door switch is out of order.
DOOR OPEN
ERROR
5
• The appliance is tilted.
6
7
IMBALANCE
ERROR
• Laundry is gatherd to one side.
• The THERMISTOR is out of order.
HEATING
ERROR
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ERROR SYMPTOM
CAUSE
• MAIN PWB ASSEMBLY is out of order
Replace the MAIN PWB ASSEMBLY
8
CURRENT
ERROR
• Winding in the STATOR ASSEMBLY is short-circuited.
Replace the STATOR ASSEMBLY
• “
” is displayed during a high spin
Replace the LEAD WIRE ASSEMBLY (MOTOR)
• The connector in the LEAD WIRE ASSEMBLY is not connected to
the connnector of STATOR ASSEMBLY
Reconnect or repair the connector
MOTOR
ERROR
9
• The hall sensor is out of order/defective.
Replace the STATOR ASSEMBLY
• The Dry Heater is out of order
DRY
10
Replace the Dry Heater
HEATOR
ERROR
• The Connector of the Dry Heater is not connected properly to the
connector in the Main PWB ASSEMBLY
Reconnect or repair the connector
• The Dry fan motor is out of order
Replace the fan Motor.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
8. ERROR DIAGNOSIS AND CHECK LIST
8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION
SYMPTOM
GUIDE FOR SERVICE CALL
NO POWER
Is the power plug connected firmly to
220-240V~ outlet?
Power failure? or Breaker opened?
Visit to check
Water inlet trouble
Is "
" displayed?
Is the tap opened?
Is the tap frozen?
Is the water supply shut-off?
Clean the filter of
inlet valve
Is filter in the inlet valve clogged with
foreign material?
Visit to check
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMPTOM
GUIDE FOR SERVICE CALL
• Door does not open
• Error displayed on
the program
Started with door opened?
YES
Close the door
NO
Visit to check
.
Check if the door switch is O K.
• DRAIN TROUBLE
Is "
" displayed?
YES
Is the debris filter clogged with foreign
material such as pin, coin and etc.?
Clean up
the filter.
YES
NO
Is the drain hose frozen with water,
kinked or crushed?
NO
Visit to check
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMPTOM
GUIDE FOR SERVICE CALL
Is low-sudsing detergent for the drum
Suds overflow from the
appliance.
washing machine used?
(In this condition, wash and
spin do not operate
normally)
LOW-SUDSING
Is the proper amount of detergent used
as recommended?
Recommend to reduce the using amount
of detergent.
This appliance has the automatic suds sensing function which
operates under much suds condition for good rinse and
preventing overflow.
When much suds are sensed, suds removing function such as
drain, water input and pause will operate without rotating the
drum.
No effect of softener
Is softener put in the correct compartment of
Compartment for
the drawer?
softener
Is the drawer closed during wash?
Is the softener cap clogged?
Explain how to use softener
< Clean the compartment for softener >
Visit to check
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2.FAULT DIAGNOSIS AND TROUBLE SHOOTING
CAUTION
1. Be careful of electric shock or disconnecting the parts while trouble shooting.
2. First of all, check the connection of each part terminal with wiring diagram.
3. If you replace the MAIN PWB ASSEMBLY, Put in the connectors correctly.
NO POWER
When measuring the voltage of the outlet,
is the voltage AC 220-240V~?
Check the fuse?
Is the led(1) on?
Replace MAIN PWB
ASSEMBLY
Is connector(2) disconnected or
disassembled?
Reconnect the PWB
ASSEMBLY
Reconnect the PWB
ASSEMBLY
Is wire of the PWB ASSEMBLY disconnected?
Replace PWB ASSEMBLY
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NO WATER SUPPLY
Is water supply shut-off?
Is the tap opened?
Open the tap.
Check the AIR CHAMBER
and the tube clogged
with impurity.
When you press both Rinse button and Spin button
simultaneously, is the water level frequency below
242?
Is the inlet valve filter clogged with impurity?
Clean the filter.
Replace the INLET VALVE
ASSEMBLY.
Is resistance between each terminal of INLET
VALVE ASSEMBLY is 2~8
k
?
Check the voltage of the inlet valve connector
220-240V~.
Replace the MAIN PWB
ASSEMBLY
(Refer to 7-2 QC TEST MODE)
DETERGENT DOES NOT FLOW IN
Refer to
Is water supplied?
NO WATER SUPPLY
Check the wiring on the
dispenser.
Are replaceptacles correctly connected to the
terminals of the INLET VALVE ASSEMBLY?
Put the detergent in the
correct position
Is detergent put in the correct compartment of
the drawer?
PRE+MAIN
MAIN WASH
: Detergent
Clean the drawer.
Is the detergent hardened?
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTENER DOES NOT FLOW IN
Refer to
Is water supplied?
NO WATER SUPPLY
Are receptacles correctly connected to the terminals
of the INLET VALVE ASSEMBLY?
Check the wiring on the
dispenser.
Put it in the correct
compartment.
Is softener put in the correct compartment of the
drawer?
Clean the cap and
drawer.
Is the softener cap clogged?
ABNORMAL SOUND
Is the motor bolt loosened?
Fix the bolt tightly.
Replace the STATOR
ASSEMBLY or ROTOR
ASSEMBLY.
Is there friction noise from the motor?
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HEATING WITHOUT WATER
When pressing Rinse Hold after draining, is the
water level frequency 248 ~ 262 or more?
When pressing Rinse Hold while wash, is the
water level frequency between 230 - 245?
Replace the
S.PRESSURE SWITCH
ASSEMBLY
Checking voltage between two pins as press
the POWER button is the voltage 220-240V~?
Replace the MAIN PWB
ASSEMBLY
DRAIN MALFUNCTIONING
Repair the DRAIN HOSE
ASSEMBLY.
Is the drain hose twisted or frozen?
Remove foreign
material.
Is the impeller of the drain pump clogged?
Is the connector disconnected, disassembled?
Reconnect or repair the
connector
Is the coil of the drain pump cut-off?
Repair the DRAIN PUMP
ASSEMBLY.
(resistance of coil is 80~150
)
When checking voltage between connectors
)on spinning, is the voltage 220-240V~
as the figure?
Repair the MAIN PWB
ASSEMBLY.
(
,
22
Download from Www.Somanuals.com. All Manuals Search And Download.
HEATING CONTINUOUSLY ABOVE
THE SETTING WATER TEMPERATURE
When disconnect the connector (1) on the
MAIN PWB ASSEMBLY is the resistance of the
Replace the THERMISTOR
(6322FR2046C)
natural connectors
(Blue/White) between
2.5 to 180
(White/Red),
k
k
(105 ~0 )?
When checking THERMISTOR on the tub is the
THERMISTOR loosened above 2mm from
the rubber?
Push the THERMISTOR
tightly to the rubber.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SPIN TROUBLE
Check the sensor
Check on the spinning, is the frequency of the
water level 248 or more? The frequency can be
checked by pressing the Rinse Hold and Spin
buttons at the same time on the program.
(Pressure) or hose
(Sensor). If the problem
is on the sensor or the
hose, replace the sensor
or the hose.
When pressing Intensive, Rinse Hold and POWER
buttons at the same time after power off, press the
Start/Pause button 2 times, is the drum low speed
spin?
Normal
Is it disconnected, or disassembled?
[White : 3pin( ), Red:3pin( ), Red:3pin( ),
Natural:4pin( )]
Correct the connector.
Correct the connector.
Is it disconnected, or disassembled?
[White:3pin ( ), White:5pin ( )]
Check the motor connector, Is the resistance of
the terminal same as the figure?
Replace the STATOR
ASSEMBLY
(4417EA1002D)
MOTOR TERMINAL (1)
Resistance of terminal:
About 5
10
Replace the MAIN PWB ASSEMBLY
24
Download from Www.Somanuals.com. All Manuals Search And Download.
[dHE] ERROR DISPLAY
Dry duct
Replace the thermistor.
(6322FR2046L)
~
NO
YES
Condensing
duct
CHECK FOR DRY HEATER TROUBLE
CHECK FOR DRY FAN MOTOR TROUBLE
Disassemble the condensing duct.
Thermistor
Is there any foreign object in condensing
duct.
Clean the condensing
duct.
YES
NO
Disassemble the dry fan assy and dry duct
upper, and clean foreign object in duct and
fan.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Yellow/Black
Black
26
Download from Www.Somanuals.com. All Manuals Search And Download.
(1)
(1)
(1) (3)
(2)
Yellow
(3)
(2)
(1)
DOOR DOES NOT OPEN
After draining and
^Door lock_lamp off,
open the door.
^
_
Is Door lock Display lamp on?
Check switch Assembly,
Door lock connector and
Main PWB ASSEMBLY.
^
Is
_
Displayed?
27
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
9. DISASSEMBLY INSTRUCTIONS
ꢀ
Disassemble and repair the parts after pulling out power cord from the outlet.
CONTROL PANEL
Unscrew 2 screws on the back of the top plate.
PLATE ASSEMBLY (TOP)
Pull the top plate backward and upward as shown.
Disconnect the ASSEMBLY connector.
Pull out the drawer and unscrew 2 screws.
Hook
Push 2 upper hooks down and pull the control panel.
Control Panel Assembly
Disconnect the PWB ASSEMBLY from the control
panel by unscrewing 7 screws.
Control Panel Assembly
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPENSER ASSEMBLY
①Disassemble the Top Plate Assembly.
②Pull the drawer to arrow direction.
③Two screws are unscrewed.
PUSH
①The hose clamps and the hose are
disassembled.
②The ventilation bellows are disassembled on
the tub.
DISPENSER
ASSEMBLY
30
Download from Www.Somanuals.com. All Manuals Search And Download.
INLET VALVE
①Disconnect the wiring connector.
② Remove the valve by two screws of the valve
2
holder.
1
ꢁWhen reconnecting the connector
VALVE
VALVE
VALVE
VALVE
ꢂ
ꢃ
ꢄ
ꢅ
(DRY)
YL/BK - BK
GY/WH - BK
WH/BK - BK
BL/RD - BK
4
(PRE-WASH)
(NORMAL-WASH)
(HOT)
3
COVER LOWER
① Remove the lower cover to arrow direction
after one screw is unscrewed.
Removing method of remained water
①Rotate the Cap(Remaining Hose) to arrow
direction.
②Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
Cap(Remaining Hose)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DOOR
①Open the door completely.
②Remove the two screws from the hinge.
※When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
GASKET
Take apart the CLAMP ASSEMBLY (cabinet).
Unscrew 2 screws from the CABINET COVER.
Open the lower cover cap and unscrew 1 screw inside
Take apart the LOWER COVER.
Disassemble the CONTROL PANEL ASSEMBLY.
(Refer to page 29)
Unscrew all the screws on the upper and lower sides of
the CABINET COVER.
Take apart the tub CLAMP ASSEMBLY
Make sure that the drain hole of the GASKET is put
beneath when reassembling the GASKET.
Refer to the arrow mark on the TUB COVER.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
①Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
Rotor
Bolt
(ROTOR ASSEMBLY)
①Remove the 6 bolt from the stator.
②Disconnect the 2 connectors.
HOW TO ASSEMBLE THE MOTOR
(STATOR ASSEMBLY)
①Remove the bolts at the Tub.
Damper
② The Hinge(Damper) at the base is pulled off
Hinge,
Damper
pressing on the snaps at the sharp end.
③The hinge at the base is pulled off.
(To arrow direction)
(FRICTION DAMPER)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
PUMP
Pump Outlet Hose
①Remove pump outlet hose.
②Remove tub pump bellows.
③Remove cap(Remaining Hose).
④Disconnect the wiring.
⑤Three screws are unscrewed from the cabinet.
⑥Remove the pump to arrow direction.
Tub Pump
Bellows
HEATER
①Loosen the nut.
②Remove washing heater by pulling out.
CAUTION
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
THERMISTOR
①Pull it out by holding the thermistor bracket.
ꢁ If holding the wire and pulling out it, it may be
broken.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCH ASSY, DOOR LOCK
① The cabinet cover clamp is removed and the
gasket is released.
②Two screws are unscrewed.
③ The door lock S/W is disconnected form the
wiring connector and the strap.
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
①Remove washing heater.
② Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DRY DUCT
①Remove 6 screws and dry fan assembly.
Dry fan
Ass'y
②Remove 7 screws and dry duct upper.
Dry Duct
Upper
①Remove 1 screw and dry heater.
②Remove thermostat.
Dry Heater
Thermostat
①Remove 17 screws from Dry duct upper and
Dry fan Assembly.
①Remove 5 screws and condensing duct.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
10. EXPLODED VIEW AND PART LIST
10-1.THE PART LIST OF CABINET ASSEMBLY
37
Download from Www.Somanuals.com. All Manuals Search And Download.
10-2 THE EXPLODED VIEW OF CONTROL PANEL &
DISPENSER ASSEMBLY
F170
F160
F430
F110
A450
38
Download from Www.Somanuals.com. All Manuals Search And Download.
10-3 THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY
39
Download from Www.Somanuals.com. All Manuals Search And Download.
10-4 THE EXPLODED VIEW OF DRYER
:Non-service part
:Service part
M216
M217
40
Download from Www.Somanuals.com. All Manuals Search And Download.
|