LGEUS_LF-D7150A.JA1ULLN(LF-D7150)_ENG_133E
DVD MICRO HI-FI SYSTEM
OWNER’S MANUAL
MODEL : LF-D7150
CD - R/RW
Please read this manual carefully before operating your set.
Retain it for future reference.
Designs and specifications are subject to change without
notice for improvement.
Call us and we will
guide you through
your first recording,
for free.
1-800-243-0000
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-
dures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and oper-
ating instructions should be read before the product is
operated.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future refer-
ence.
11. Only use attachments/accessories specified by
the manufacturer.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this product near water. – For example:
near a bath tub, wash bowl, kitchen sink, laundry tub,
in a wet basement; or near a swimming pool; and
other areas located near water.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution
when moving the cart/product combination to
avoid injury from tip-over.
6. Clean only with dry cloth. – Unplug this product from
the wall outlet before cleaning. Do not use liquid
cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over- heating. The open-
ings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This prod-
uct should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is pro-
vided or the manufacturer’s instructions have been
adhered to.
13. Unplug this product during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Before Use
Introduction
Playable Discs
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . 3
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Front Panel/ Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
Preparation
In addition, this unit can play a DVD R, DVD RW discs,
CD-R/CD-RW that contain audio titles, MP3, WMA,
JPEG or DivX files.
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Before Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-16
Operation
Operation with DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-20
Operation with Audio CD and MP3/WMA Disc . . . . . . . 20-22
Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . 21
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Operation with DivX Disc . . . . . . . . . . . . . . . . . . . . . . . . . 23
Operation with RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Notes
– Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD R/RW) disc itself,
some CD-R/RW (or DVD R/RW) discs cannot be
played on the unit.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Reference
–
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Notes on DVDs
Some playback operations of DVDs may be intentionally
fixed by software manufacturers. As this unit plays
DVDs and according to disc content designed by the
software manufacturer, some playback features of the
unit may not be available or other functions may be
added.
About Symbols
About the
symbol display
“
” may appear on the TV screen during operation.
Refer also to the instructions supplied with the DVDs.
Some DVDs made for business purposes may not be
played on the unit.
This icon means the function explained in this owner’s
manual is not available on that specific DVD disc, or at
that time.
Regional code of the DVD player and DVDs
This unit is designed and manufactured for playback of
region “1” encoded DVD software. The region code on
the labels of some DVD discs indicates which
type of player can play those discs. This unit
can play only DVD discs labeled “1” or “ALL”. If
you try to play any other discs, the message
“Check Regional Code” will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
DVD DVD
1
CD
Audio CDs
MP3 MP3 disc
WMA disc
JPEG disc
WMA
JPEG
DivX DivX disc
About the symbols for instructions
Indicates hazards likely to cause harm to the unit itself or
other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel/ Rear Panel
1
OPTICAL
IN
19
2
3
4
R
L
FM
SOUND
XDSS
PLAY
14
13
12
L
A
U
X
GND
AM
TUN. (-)
TUN. (+)
18
17
R
5
6
STOP
SPEAKERS
XTSpro
EQ
VOLUME
15
16
FUNCTION
MICVOL.
7
8
11
10
9
1. CD DOOR
9. HEADPHONE SOCKET ( PHONES) - 3.5mm
10. USB connector
2. DISPLAY WINDOW
3. • POWER ( ) button
• CLOCK button
11. MIC JACKS (MIC1, MIC2) - 3.5mm
12. MIC VOLUME KNOB (MIC VOL.)
13. EQUALIZER PATTERN (EQ) button
14. XDSS button
•
TIMER button
• SET/CD button
[]
15. ANTENNA Connector
• MP3 OPT. button
16. POWER CORD
• MONO/STEREO (MONO/ST.) button
• Z OPEN/CLOSE button
17. AUXILIARY INPUT (AUX) connector
18. SPEAKER Connector
4. SOUND button
19. • COMPONENT VIDEO OUT (PROGRESSIVE SCAN)
(Y Pb Pr) Connector
5. • PLAY ( ) button
G
• STOP (x) button
• TUN. (-/+) buttons
• MONITOR OUT Connector
• S-VIDEO OUT Connector
• OPTICAL IN Connector
• CD SKIP (. bb/BB >) buttons
6. XTSpro button
7. FUNCTION (FUNC.) DIAL
8. VOLUME knob
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1. POWER button
POWER
MUTE
USB
2. FUNCTION SELECT buttons
(TUNER/BAND, DVD, AUX/D.INPUT, USB)
3. NUMERIC buttons (0-9)
4. EQUALIZER (EQ), XDSS, XTS pro, SOUND,
AUDIO, SUBTITLE buttons
20
19
1
2
AUX/
TUNER/BAND
DVD
D.INPUT
5. SET UP button
SLEEP
6. • ARROW buttons (
/
/
/
)
3
(For use in highlighting a selection on a GUI
menu screen, TITLE and MENU screen.)
• PRESET (-/+) buttons
XTS pro
EQ
XDSS
• TUN. (-/+) buttons
7. SELECT/ENTER button
8. MENU button
4
5
AUDIO
SOUND MODE
SET UP
SUBTITLE
(Use the MENU button to display the menu screen
included on DVD video discs.)
PRESET
DISPLAY
TUN.+
18
+
9. SCAN (
)/ SLOW (t T)/ SKIP (./>)
FF/GG
/
TUN.-
buttons
SELECT
/ENTER
6
10. PROG./MEMO, REPEAT, REPEAT A-B buttons
11. STOP (x), PAUSE([])/ STEP, PLAY ( ) buttons
12. CLEAR/ ZOOM/ DIMMER/ DISP.MODE buttons
G
7
8
9
MENU
TITLE
_
17
16
13. ECHO VOL. (
14. MIC VOL. (
/
) buttons
) buttons
PROG./MEMO
SCAN
SLOW
SKIP
/
15. MARKER/ SEARCH buttons
16. VOLUME -/+ buttons
17. TITLE button
REPEAT
10
REPEAT A-B
(Use the TITLE button to display the title screen
included on DVD video discs.)
18. DISPLAY button
19. SLEEP button
20. MUTE button
STOP
PAUSE/STEP PLAY
11
12
13
CLEAR
ZOOM
MARKER
SEARCH
15
14
DIMMER DISP.MODE
ECHO VOL.
MIC VOL.
Remote Control Operation Range
Remote control battery installation
Point the Remote Control at the remote sensor and
press the buttons.
Detach the battery cover on
the rear of the Remote
ꢀ Distance: About 23 ft (7 m) from the front of the
remote sensor
Control, and insert two R03
(size AAA) batteries with
ꢀ Angle: About 30° in each direction of the front of the
remote sensor
and
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV
Progressive Scan (ColorStream® pro) connection
ꢀ Make one of the following connections, depending on
the capabilities of your existing equipment.
ꢀ If your television is a high-definition or “digital ready”
television, you may take advantage of this unit’s
progressive scan output for higher video resolution.
ꢀ If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
ips
ꢀ Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use one of the connections described
below.
ꢀ Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Progressive Scan on the unit
.
Connect the COMPONENT VIDEO OUT (PROGRESSIVE
SCAN) jacks from the unit to the corresponding in jacks
on the TV using an optional Y Pb Pr cable (C).
Caution
ote
–
Make sure the unit is connected directly to the TV.
Select the correct AV input on your TV.
– Set the Progressive to “On” in the Setup menu for
progressive signal, see page 14.
– Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy protection
system.
Video connection
Connect the MONITOR OUT jack from the unit to the
VIDEO IN jack on the TV using the video cable supplied
(V).
S-Video connection
OPTICAL
IN
Connect the S-VIDEO OUT jack on the unit to the S-
VIDEO IN jack on the TV using the S-Video cable (S).
Component Video (Color Stream®) connection
Connect the COMPONENT VIDEO (PROGRESSIVE
SCAN) jacks from the unit to the corresponding in jacks
on the TV using an Y Pb Pr cable (C).
V
S
C
VIDEO
IN
S-VIDEO
IN
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Pb
Pr
L
Rear of TV
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to Antenna
Connecting to Auxiliary Equipment
Connect the supplied FM/AM antennas for listening to
the radio.
- Connect the AM loop antenna to the AM antenna
You can use VCR or other unit connected to the AUX
connector.
connector.
- Connect the FM wire antenna to the FM antenna
connector.
OPTICAL
IN
R
L
FM
L
A
X
GND
AM
R
SPEAKERS
R
L
FM
L
A
U
X
GND
AM
R
SPEAKERS
To AUDIO IN
IN
OUT
VIDEO
To AUDIO OUT
otes
AUDIO (L)
ꢀ To prevent noise pickup, keep the AM loop antenna
away from the unit and other component.
ꢀ Be sure to fully extend the FM wire antenna.
ꢀ After connecting the FM wire antenna, keep it as
horizontal as possible.
AUDIO (R)
VCR (or Auxiliary Device, etc)
Connect a VCR or auxiliary device, etc to the
1
AUX connector.
Select AUX function by turning the FUNCTION
2 dial on the front panel or pressing the
AUX/D.INPUT button on the Remote Control.
“AUX” will be shown on the display window.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to Optional Equipment
Connecting USB
STOP
You can use an optical output of a Digital Device to the
OPTICAL IN connector.
XTSpro
EQ
VOLUME
FUNCTION
MICVOL.
DVD Player (or Digital Device, etc)
OPTICAL
OUT
USB Memory, MP3 Player (or
Memory Card Reader, etc.)
Connect the USB port of USB memory (or MP3
player, etc) to the USB connector on the front
panel.
OPTICAL
N
1
Select USB function by turning the FUNCTION
2 dial on the front panel or pressing the USB but-
Connect an optical output of DVD Player (or
Digital Device etc) to the OPTICAL IN connec-
tor.
ton on the Remote Control.
“USB” will be shown on the display window.
1
Select AUX OPT function by turning the FUNC-
2 TION dial on the front panel or pressing the
ote
AUX/D.INPUT button on the Remote Control.
“AUX OPT” will be shown on the display window.
Any DivX files in your memory card will not be able to
be played.
Speaker System Connection
Connect the speaker cables to the speaker connector.
otes
ꢀ Be sure to match the speaker
cable to the appropriate termi-
nal on the components: + to +
and – to –. If the cords are
reversed, the sound will be dis-
torted and will lack base.
ꢀ If you use front speakers with
low maximum input rating,
adjust the volume carefully to
avoid excessive output on the
speakers.
OPTICAL
IN
R
L
FM
L
A
U
X
GND
AM
R
SPEAKERS
ꢀ Connect the Left/Right speaker
correctly. If it reversed, the
sound may be distorted.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Volume Adjustment
Setting the Clock
• Turn VOLUME knob clockwise to increase the sound
level, or counterclockwise to decrease it.
Press CLOCK.
1
(If the clock requires setting, press and hold CLOCK
for more than 2 seconds.)
- The hours display begins to blink.
• Press VOLUME + to increase the sound level, or use
VOLUME - to decrease it on the Remote Control.
Sound Quality Adjustment
Select a 24 hour cycle or 12 hour cycle by
pressing . bb/BB > on the front panel.
• To activate stereo sound
2
Select a desired sound mode by using the EQ button
on the front panel or the Remote Control.
Each time you press the button the setting changes in
the display window as shown below.
(12HR)
or
(24HR)
FLAT
→
POP
→
CLASSIC
↑
↓
Press SET/CD to confirm the selected hour
[ [
JAZZ
← DRAMA
←
ROCK
3
4
5
6
7
cycle.
Use . bb/BB > on the front panel to set
the correct hours.
Press SET/CD .
• Headphone Jack
Connect a stereo headphone plug ( 3.5mm) into the
headphone jack.
The speakers are automatically disabled when you
plug in headphones (not supplied).
[ [
Use . bb/BB > on the front panel to set
the correct minutes.
MUTE
Press SET/CD and the correct time is shown
on the display window.
[ [
Press MUTE to turn off the sound, press again to restore.
You can mute your unit in order to answer the telephone.
The “ ” indicator flashes in the display window.
ote
When the clock does not appear in the display
window, follow as below.
- In case the clock is set, prese the CLOCK button.
The clock will be shown in the display window for
about 5 seconds.
XDSS (Extreme Dynamic Sound System)
Press XDSS button repeatedly to reinforce treble and bass.
XDSS ON → XDSS OFF
- In case the clock is not set, the clock will be blinked in the
display window for about 1 minute. Set the clock as above.
MP3 Optimizer
This function is optimizes compressed MP3 file. It provides
improvement to the bass sound. Each time you press MP3
OPT. the setting changes in the following order.
MP3-OPT ON t MP3-OPT OFF
Sleep Timer Function
When the sleep timer is set, the unit automatically turns
off after the specified time has elapsed.
To specify the time delay before the power is
1
turned off, press SLEEP.
In the display window you can see SLEEP 180 for
about 5 seconds. This means that the system turns
off automatically after 180 minutes.
XTS pro
Each time you press XTS pro the setting changes in the fol-
lowing order.
XTS-P ON → XTS-P OFF
Each time you press SLEEP the setting changes
2 in the following order.
SLEEP 180 →150 → 120 →90→80→70 → 60→ 50 → 40 →
30 → 20 →10 → OFF→SLEEP 180...
To check the remaining time until the power is
turned off.
While the sleep function is active press SLEEP
briefly. The time remaining until the unit turns off is
displayed for about 5 seconds.
SPECTRUM Effect
Each time you press the DISP.MODE button repeatedly
on the Remote Control, you can check the sprectrum
change of 6 types in the display window.
3
ote
DIMMER
If you press SLEEP while the sleep time is displayed,
the SLEEP time is reset.
This function dims the LED of the front panel by half in
power-on status .
Press DIMMER once. The LED (Light-emitting diode) of front
panel is turned off. If you press it once more, the display win-
dow will be darken by half. To cancel, press the button again.
To cancel Sleep Timer setting
If you wish to stop the function, press the SLEEP button
repeatedly until “SLEEP 10 ” appears, and then press
SLEEP once again after “SLEEP 10 ” shows on the display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Adjust the volume level by pressing
. bb/BB > on the front panel.
Timer Function
13
14
With the TIMER function you can have the radio recep-
tion, CD play and USB play turned on and off at the
time desired.
Press SET/CD .
[ ]
“
” appears in the display window and the timer
Press CLOCK to check the current time.
setting has been completed.
1
For your reference
Turn the system off.
The selected timer functions are automatically
switched on and off at the preset times.
If you don’t set clock, timer function doesn’t work.
15
Press TIMER to enter the timer setting mode.
TUNER
t
DVD/CD
dow in turn.
For your reference
tUSB flash in the display win-
2
To cancel or check the timer
Each time the TIMER button is pressed you can
select the timer set or cancel. You can also check the
timer setting status.
To activate or check the timer, press the TIMER button
repeatedly so that “ ” appears in the display window.
To cancel the TIMER, press the TIMER button repeat-
edly so that “ ” disappears from the display window.
If you want to correct the previous memorized TIMER
setting, press and hold the TIMER button more than 2
seconds.
- The previous memorized timer setting for on Time and
“
” indicator appears in the display window.
Press SET/CD when the desired function
[ ]
flashes.
Using Microphone
3
You can sing to a music source by connecting a
microphone to the unit.
4 1. When you select the TUNER function,
Select the previous memorized preset
number with . bb/BB > on the front panel
Connect your microphone to the MIC socket.
and press SET/CD .
[]
“
” will be shown in the display window.
1
‘ON TIME’ indicator appears for about 0.5 sec-
onds in the display window and then disappears.
2. When you select DVD/CD or USB function,
‘ON TIME’ indicator appears for about 0.5 sec-
onds in the display window and then disappears.
2 Play the music you want.
Sing along with the accompaniment.
Adjust the microphone volume by turning MIC
VOLUME KNOB.
3
Set the hour to switch on by pressing
. bb/BB > on the front panel.
otes
5
6
7
ꢀ When not using the microphone, set the MIC volume
knob to minimum or turn off the MIC and remove the
microphone from the MIC socket.
ꢀ If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using the MIC volume control.
ꢀ If sound through the microphone is extremely loud, it
may be distorted. In this case, turn the MIC volume
control toward minimum.
Press SET/CD to confirm the turn on hour
[ ]
time.
Set the minute to switch on by pressing
. bb/BB > on the front panel.
Press SET/CD to confirm the turn on minutes
[ ]
time.
8
‘OFF TIME’ indicator appears for about 0.5 seconds
in the display window and then disappears.
To Adjust ECHO Volume
You can give an echo effect to the sound from the
microphones.
Set the hour to switch off by pressing
. bb/BB > on the front panel.
9
Press the ECHO VOL. (
to increase the echo volume or decrease it.
/
) on the Remote Control
Press SET/CD .
[ ]
10
11
12
Set the minute to switch off by pressing .
bb/BB > on the front panel.
Press SET/CD .
[ ]
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Mini Glossary for Audio Stream &
Surround mode
DVD
CD
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
When DVD is inserted
You can change the Digital Audio Output mode by
pressing the AUDIO button on the Remote Control
during playback. Although the DVD contents differ from
disc to disc, the following explains the basic operation
when this feature is used.
program source. If you play DVDs with “
” mark, you
can enjoy even better sound quality, greater spatial accura-
cy, and improved dynamic range.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and double-D symbol are trademarks
of Dolby Laboratories.
Each time you press SOUND button, the “BYPASS
indicator will only be shown in the display window.
”
BYPASS
When CD is inserted
Outputs the sound from the front left and right speakers
and subwoofer.
Each time you press SOUND button, the sound mode
of Audio CD is changed on the display window in the
following order.
BYPASS → STUDIO → CLUB → HALL → THEATER 1 →
CHURCH → BYPASS...
For your reference
•
You can identify the encoding format of program
software by looking at its packaging.
- Dolby Digital discs are labelled with the
logo.
- Dolby Surround encoded programs are labelled with
the
logo.
ote
When you play sound tracks with 96kHz sampling frequency,
the output signals will be converted to 48kHz (sampling fre-
quency).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Press or
to change the setting of an item.
Caution:
3 The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press SELECT/ENTER to execute the setting.
Before using the Remote Control, press the DVD button to
select the device to be operated.
General Explanation
This manual gives basic instructions for operating the
unit. Some DVDs require specific operation or allow
only limited operation during playback.
Temporary Feedback Field Icons
Title
Repeat title
A - B
Repeat sequence
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
the unit or is not available on the disc.
Resume play from this point
Action prohibited or not available
On-Screen Display
General playback status can be displayed on the TV
screen. Some items can be changed on the menu.
Notes
ꢀ Some discs may not provide all of the features on the
on-screen display example shown below.
ꢀ If no button is pressed for 10 seconds, the on-screen
display disappears.
On-screen display operation
Press DISPLAY during playback.
1
Press
/
to select an item.
2 The selected item will be highlighted.
Example: On-Screen Display during playing DVD
Items
Selection Method
Function / Action using
/
to select item
Title Number
Shows the current title number and total number of titles /
skips to the desired title number.
/
, Numbers or
SELECT/ENTER
, Numbers or
1 / 3
Chapter Number
Time search
Shows the current chapter number and total number of
chapters / skips to the desired chapter number.
/
1 / 12
SELECT/ENTER
Shows the elapsed playing time / searches by elapsed
time.
0:20:09
Numbers, SELECT/ENTER
Audio language
and Digital Audio
Output mode
Shows the current audio soundtrack language,
encoding method, and channel number / changes the
setting.
/
or
AUDIO
Subtitle language
Shows the current subtitle language / changes the set-
ting.
/
or
ABC
1 ENG
1 / 3
SUBTITLE
Angle
Shows the current angle number and total number of
angles / changes the angle.
/
Sound
Shows the current sound mode / changes the setting.
/
or
Bypass
SOUND
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Initial Settings
DISPLAY
DISPLAY
By using the Setup menu, you can make various adjust-
ments to items such as picture and sound. You can also
set a language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
item, see pages 13 to 15.
TV Aspect
16
:
9
Display Mode
Progressive Scan
Widescreen
Off
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Move
Select
TV Aspect DVD
Press on the Remote Control.
To go back to the previous level:
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Press on the Remote Control.
Display Mode DVD
General Operation
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Press SETUP.
1
The setup menu appears.
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not fit.
Use
/
to select the desired option then
to move to the second level.
2 press
The screen will be shown the current setting for the
selected item, as well as alternate setting(s).
Progressive Scan DVD
Use
/
to select the second desired option
to move to the third level.
3 then press
Progressive Scan Video provides higher quality pictures
with less flickering.
If you are using the Component Video jacks for connec-
tion to a TV or monitor that is compatible with a pro-
gressive scan signal, set Progressive Scan to On.
Use
/
to select the desired setting then
4 press SELECT/ENTER to confirm your selection.
Some items require additional steps.
Press SETUP or PLAY to exit the setup menu.
To Turn ON progressive scan:
5
Connect component out of the DVD to the input of your
monitor/television, set your television or monitor to
Component Input.
LANGUAGE
LANGUAGE
1. Select “Progressive Scan” on the DISPLAY menu
English
Original
Off
OSD
then press
.
Disc Audio
Disc Subtitle
Disc Menu
2. Select “On” using the
/
buttons.
Original
3. Press SELECT/ENTER to confirm your selection.
The confirm menu will appear.
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the
buttons to highlight Enter.
/
Move
Select
5. Pressing “Enter” will set the player to Progressive
scan mode.
OSD
Select a language for the Setup menu and on-screen
display.
Caution
Disc Audio / Subtitle / Menu DVD
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that “NO DISC” is displayed on the display
window
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number buttons
to enter the corresponding 4-digit number according to the
language code list on page 26. If you enter the wrong lan-
guage code, press CLEAR on the Remote Control.
2) Press and hold STOP ( ) for five seconds then
x
release it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
AUDIO
OTHERS
OTHERS
AUDIO
DivX(R) Registration
Select
DRC
On
On
Vocal
Select
Move
Move
Select
DivX(R) Registration DivX
Dynamic Range Control (DRC) DVD
You can show the DivX DRM (Digital Right
Management) Registration code for your unit only.
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing dialog intelligibility. Set
DRC to On for this effect.
Your registration code is : XXXXXXXX
Please use this code to register this player with
the DivX(R) Video On Demand service.
This will allow you to rent and purchase videos
using the DivX(R) Video On Demand format.
The Registration code is used for VOD (Video-On-
Demand) service agent. You can purchase or rental an
encrypt movie file.
Notes
ꢀ The DRC function works only during playback of
Dolby Digital recorded discs.
ꢀ The level of Dynamic Range Compression may differ
depending on the DVD disc.
Notes
If you rent the DivX VOD file, it has several options of
viewing limits as show below.
Vocal DVD
• Display the number which you can watch the file.
Set Vocal to On only when a multi-channel Karaoke
DVD is playing. The karaoke channels on the disc will
mix into a normal stereo sound.
This rental video has 7 views left. A view
ends when you stop playback, play a different
video, or turn off your player.
?
Do you want to use one of your 7 views now
Yes
No
• The rental has been expired.
This rental is expired.
• Display the authorization error.
This video player is not authorized to
play this video.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Password (Security Code)
LOCK (Parental Control)
You can enter or change password.
LOCK
Rating
Unlock
1 Select Password on the LOCK menu then press
2 Follow step 2 as shown left (Rating). “Change” or
“New” is highlighted.
.
Password
Country Code
****
RU
U S
3 Enter the new 4-digit code, then press
SELECT/ENTER. Input it again to verify.
4 Press SETUP to exit the menu.
Move
Select
If you forget your Security Code
Rating DVD
If you forget your security code you can clear it using
the following steps:
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain parental
control information that applies to the complete disc or to
certain scenes on the disc. Movies and scenes are rated
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
1 Input the 6-digit number “210499” in the setup menu
and the security code is cleared.
2
Enter a new code as described above.
ote
The parental control feature allows you to block access
to scenes below the rating you input, thereby preventing
your children from being able to view material you
believe is unsuitable.
INPUT PASSWD
When “
” appears on the TV screen,
press STOP (x) and then press SETUP to move to the
setup menu.
Select “Rating” on the LOCK menu then press
Country Code DVD
1
.
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the list
in the reference chapter.
To access the Rating, Password and Country
2 Code features, you must input the 4-digit
security code you created.
Select “Country Code” on the LOCK menu then
If you have not yet entered a security code you are
prompted to do so.
1
press
.
Follow step 2 as shown left (Rating).
Input a 4-digit code and press SELECT/ENTER.
Enter it again and press SELECT/ENTER to verify.
If you make a mistake before pressing
2
3
Select the first character using
/
buttons.
SELECT/ENTER, press CLEAR.
Select a rating from 1 to 8 using the
/
Shift the cursor using button and select the
3 buttons.
4 second character using
/
buttons.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
Press SELECT/ENTER to confirm your country
5 code selection.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
ote
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit pass-
word or change the rating level in order to play the disc.
Press SELECT/ENTER to confirm your rating
4 selection, then press SETUP to exit the menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD
Playing a DVD
General Features
Playback Setup DVD
ote
ꢀ Turn on the TV and select the video input source
connected to the unit.
ꢀ Audio system: Turn on the audio system and select
the input source connected to the unit.
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be
available in the Setup menu.
Moving to another TITLE DVD
Press Z OPEN/CLOSE button to open the disc
1
tray.
When a disc has more than one title, you can move to
another title. Press DISPLAY while playback is stopped
Load your chosen disc in the tray, with the
playback side facing down.
2
then the appropriate number (0-9) or use
to another title.
/
to move
Press Z OPEN/CLOSE button to close the tray.
3 Playback starts automatically. If playback does not
start, press PLAY.
You can play any title by inputting its number while play-
back is stopped.
In some cases, the disc menu might appear instead.
Moving to another CHAPTER/TRACK
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which contains a menu.
DVD
DivX
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
ꢀ Press . or > briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
DVD
Use the
/
/
/
buttons to select the title/chapter
you want to view, then press SELECT/ ENTER to start.
Press TITLE or MENU to return to the menu screen.
ꢀ Press . twice briefly to step back to the previous
chapter/track.
ꢀ To go directly to any chapter during DVD playback,
Notes
– If parental control is set and the disc is not within the
rating settings you must input the password.
(See “LOCK” on page 16.)
– DVDs may have a region code. Your player will not
play discs that have a region code different from your
player. The region code for this player is 1 (one).
press DISPLAY and press
ter/track icon. Then, input the chapter/track number or
use
/
to select the chap-
/
.
Search DVD
DivX
1 Press m or M during playback.
The player will now go into SEARCH mode.
2 Press m or M repeatedly to select the required
speed: mX2, mX4, mX8, mX16, mX100
(backward) or MX2, MX4, MX8, MX16,
MX100 (forward).
With a DivX, the Search speed changes: mX2,
mX4, mX8, mX16 (backward) or MX2, MX4,
MX8, MX16 (forward).
3 To exit SEARCH mode, press PLAY.
Still Picture and Frame-by-frame playback
DVD
DivX
1 Press PAUSE/STEP on the Remote Control during
playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the Remote
Control.
3 To exit still motion mode, press PLAY.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD
Zoom DVD
General Features (continued)
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
Slow Motion DVD
1 Press ZOOM during playback or still playback to
activate the Zoom function.
1 Press t or T on the Remote Control during
playback.
If you press ZOOM repeatedly, the magnification level
increases up to four steps.
100% size → 400% size → 800% size →
The player will enter SLOW mode.
2 Use the t or T to select the required speed: t
1/2, t 1/4, t 1/8 or t 1/16 [(backward) - DVD
only] or T 1/2, T 1/4, T 1/8 or T 1/16
(forward).
1600% size → 100% size
2 Use the
/
/
/
buttons to move through the
3 To return to normal PLAY, press PLAY.
zoomed picture.
Repeat DVD
DivX
ote
You can play a title/chapter/all/track on a disc.
The zoom function may not work for some DVDs.
Press REPEAT during playback to select a desired
repeat mode.
DVD
Marker Search
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
1 During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
• Off : does not play repeatedly.
DivX - Repeat Track/All/Off
• Track : repeats the current track
• All : repeats all the tracks on a disc.
• Off : does not play repeatedly.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
Repeat A-B DVD
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
To repeat a sequence in a title:
1 Press REPEAT A-B at your chosen starting point.
“ A - ” appears briefly on the TV screen.
2 Within 10 seconds, press
number that you want to recall.
/
to select a Marker
2 Press REPEAT A-B again at your chosen end point.
“A - B” appears briefly on the TV screen, and the
repeat sequence begins.
3 Press SELECT/ENTER.
Playback will start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
3 To cancel the sequence, press REPEAT A-B.
To clear a Marked Scene
Time Search DVD
1 During disc playback, press SEARCH.
The Time Search function allows you to start playing at
any chosen time on the disc.
The MARKER SEARCH menu will appear on the screen.
2 Press
/
to select the Marker number that you
1 Press DISPLAY during playback. The on-screen
display appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
want to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
2 Within 10 seconds, press
/
to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
5 To remove the MARKER SEARCH menu, press
SEARCH.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4 Within 10 seconds, press SELECT/ENTER to confirm
the start time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD
DVD
Last Scene Memory DVD
Special DVD Features
This player memorizes last scene from the last disc that
is viewed. The last scene remains in memory even if
you remove the disc from the player or switch off the
player. If you load a disc that has the scene memorized,
the scene is automatically recalled.
Checking the contents of DVD Video
discs: Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
ote
Or, use the
/
/
/
buttons to highlight your
This player does not memorize the scene of a disc if
you switch off the player before commencing to play the
disc.
selection, then press SELECT/ENTER.
DVD
Title Menu
Screen Saver
1 Press TITLE.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TITLE again.
DVD
Disc Menu
Press MENU.
The disc menu is displayed.
DVD
Camera Angle
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
1 Press DISPLAY and then press the
/
to select
a angle.
The number of the current angle appears on the display
window.
2 Select a desired angle pressing the
/
buttons.
Changing the Audio Language DVD
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
Subtitle DVD
DivX
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
ote
If
appears, the feature is not available on the disc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA
CD
MP3
WMA
Repeat Track/All/Off
You can play a title/chapter/all/track on a disc.
CD
MP3
WMA
Disc
1 Press REPEAT when playing a disc. The repeat icon
appears.
The unit can play MP3/WMA formatted recordings on
CD-ROM, CD-R, or CD-RW discs.
2 Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
Audio CD
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.
Once you insert an audio CD a menu appears on the
TV screen. Press
/
to select a track then press
PLAY or SELECT/ENTER and playback starts.
CD
MP3
WMA
Search
0:00:00
1 / 12
1 Press m or M during playback.
Audio CD
The player will now go into SEARCH mode.
List
Track1
Track2
Track3
Track4
Track5
Program
2 Press m or M repeatedly to select the required
speed: mX2, mX4,mX8 (backward) or MX2,
MX4, MX8 (forward).
Track6
Track7
Track8
3 To exit SEARCH mode, press PLAY.
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3),
40 - 192kbps (WMA)
MP3 / WMA
1. Press
/
to select a folder, and press
SELECT/ENTER to see the folder contents.
2. Press to select a track then press PLAY or
SELECT/ENTER. Playback starts.
/
0:00:00
1 / 104
• The player cannot read an MP3/WMA file that has a
file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We rec-
ommend that you use Easy-CD Creator, which cre-
ates an ISO 9660 file system.
MP3 / WMA
List
Program
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
• File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ?
* : “ < > l etc.
• The total number of files on the disc should be less
than 999.
otes
If you are in a file list on the MP3/WMA menu and want
to return to the Folder list, use the to highlight
on the stop mode and press SELECT/ENTER.
•
/
• Press MENU to move to the next page.
• On a CD with MP3/WMA file and JPEG file, you can
switch MP3/WMA and JPEG menu. Press TITLE on
the stop mode and MP3/WMA or JPEG word on top
This unit requires discs and recordings to meet cer-
tain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatical-
ly set to these standards. There are many different
types of recordable disc formats (including CD-R con-
taining MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compat-
ible playback.
of the menu is highlighted. Then, use
/
to select
MP3/WMA or JPEG then press SELECT/ENTER.
CD
MP3
WMA
Pause
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY or press
PAUSE/STEP again.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always be sought from the copyright owner.
CD
MP3
WMA
Moving to another Track
ꢀ Press . or > briefly during playback to go to the
next track or to return to the beginning of the current
track.
ꢀ
Press . twice briefly to step back to the previous track.
ꢀ In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with JPEG Disc
JPEG
Slide Show
JPEG
Viewing a JPEG disc
Use
/
/
/
to highlight the
(Slide Show)
This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on right.
then press SELECT/ENTER.
Moving to another File
JPEG
Insert a disc and close the tray.
1
The JPEG menu appears on the TV screen.
Press . or > once during viewing a picture to
advance to the next file or to the previous file.
JPEG
List
Preview
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
Still Picture
JPEG
1 Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
Press
/
to select a folder, and press
2 SELECT/ENTER. A list of files in the folder
To rotate picture
JPEG
appears.
Press
/
during showing a picture to rotate the
picture clockwise or counter-clockwise.
Tip
If you are in a file list and want to return to the Folder
list, use the
highlight “
the previous menu screen.
/
buttons on the Remote Control to
JPEG disc compatibility with this player is limited
as follows:
and press SELECT/ENTER to return to
”
• Depending upon the size and number of JPEG files,
it could take a long time for the DVD player to read
the disc’s contents. If you don’t see an on-screen
display after several minutes, some of the files may
be too large — reduce the resolution of the JPEG
files to less than 2760 x 2048 pixels and burn
another disc.
If you want to view a particular file, press
3
/
to highlight a file and press
SELECT/ENTER or PLAY.
Slide Show starts from the selected file if Speed
option is not Off.
While viewing a file, you can press STOP(x) to
move to the previous menu (JPEG menu).
• The total number of files and folders on the disc
should be less than 999.
Tip
• Some discs may be incompatible due to a different
recording format or the condition of disc.
• Press MENU to move to the next page.
• There are four Slide Speed options:
> (Slow), >> (Normal), >>> (Fast) and II (off).
:
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
Use
/
/
/
/
to highlight the Speed. Then, use
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
to select the option you want to use then press
SELECT/ENTER.
• File names without “.jpg” extension will not be able
to be read by this DVD player. Even though the files
are shown as JPEG image files in Windows
Explorer.
• If you set Speed option to Off, Slide Show is not
active.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
MP3
WMA
Programmed Playback
The Program function enables you to store your favorite tracks from any disc in the player memory.
A program can contain 300 tracks (Audio CD/MP3/WMA).
Insert a disc.
Repeat Programmed Tracks
1
You can play a title/chapter/all/track on a disc.
Audio CD and MP3/WMA Discs:
Audio CD or MP3/WMA menu appears as below.
1 Press REPEAT when playing a disc. The repeat icon
appears.
2 Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
0:00:00
1
/
12
0:00:00
1
/
104
MP3
/
WMA
Audio CD
List
Track1
Track2
Track3
Track4
Track5
Program
Track8
List
Program
Music8
Music1
Music2
Music3
Music4
Music5
Music6
Music7
Music16
Music5
Music9
Music1
Music7
Music6
Music3
Track3
Track12
Track7
Track6
• All: repeats all the tracks on a disc.
• Off (No display): does not play repeatedly.
Track6
Track9
Track7
Track8
Track1
Track10
Erasing a Track from Program List
1 Use
/
/
/
to select the track that you wish
Audio CD Menu
MP3/WMA Menu
to erase from the Program list.
2 Press CLEAR. Or, select “
(Delete)” icon then
Press SELECT/ENTER to place the selected track on
the Program list. Repeat to erase additional tracks on
the list.
Select a track on the List.
2
Press PROGRAM. Or, select “
(Add)” icon
Erasing the Complete Program List
3 then SELECT/ENTER to place the selected track
on the Program list. Repeat to place additional
tracks on the list.
Select “
(Del all)”, then press SELECT/ENTER. The
complete Program for the disc is erased.
ote
ote
You can add all tracks in the disc. Select “
icon then press SELECT/ENTER.
(Add All)”
The programs are also cleared when the disc is removed.
To resume normal playback from programmed playback
Select the track you want to start playing on the
4 Program list.
Select a track on the List then press SELECT/ENTER.
“PROG.” disappears from the display window.
Tip
Press MENU to move to the next page.
Press PLAY or SELECT/ENTER to start.
5 Playback begins in the order in which you pro-
grammed the tracks and “PROG.” appears on the
display window. Playback stops after all of the
tracks on the Program list have played once.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DivX Disc
The unit can play the DivX files.
DivX disc compatibility with this player is limited
as follows:
Insert a disc and close the tray.
1
The DivX menu appears on the TV screen.
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
0:00:00
DIVX
1 / 12
• The file name of the DivX subtitle is available by
20-40 characters (differs from language).
List
Movie Folder 1
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
Movie Folder 8
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the dis-
play.
• If the number of the screen frame is over 30 per
1 second, this unit may not operate normally.
• If the video and audio structure of recorded file
is not interleaved, either video or audio is out-
putted.
Press
/
to select a folder, and press
2 SELECT/ENTER to see the folder contents.
• If the file is recorded with GMC, the unit sup-
ports some of 1-point of the record level.
Tip
If you are in a file list and want to return to the Folder
GMC?
*
list, use the
highlight “
the previous menu screen.
/
buttons on the Remote Control to
and press SELECT/ENTER to return to
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually called
1-point, 2-point, or 3-point GMC.
”
If you want to view a particular file, press
3
/
to highlight a file and press
SELECT/ENTER or PLAY.
Playback starts.
Playable DivX subtitle file
z ".srt ", ".smi ", ".sub ".
Press STOP(x) to exit.
Playable DivX file
4
z ".avi ", ".mpg ", ".mpeg "
otes
Playable Codec format
ꢀ
ꢀ
ꢀ
Be sure to select “SUBTITLE ON” mode by pressing the
subtitle file every time before playing a DivX file .
When the subtile has more than two languages in the file,
original subtile is only available.
The DivX files in your memory card will not be able to be
play.
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Playable Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
DivX
Display
• Bit rate: within 32 - 320kbps (MP3),
40 - 192kbps (WMA)
Press DISPLAY during playback.
General playback status can be displayed on the TV
screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with RADIO
Presetting the radio stations
Listening to the radio
Press TUNER/BAND on the Remote Control to
show either FM or AM in the display window. Or
Turn FUNCTION dial on the fornt panel.
The last received station is tuned in.
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned the vol-
ume down to the minimum level.
1
Press TUNER/BAND on the Remote Control to
show either FM or AM in the display window. Or
Press PRESET (-/+) on the Remote Control
repeatedly to select the preset station you want.
Each time you press this button, the unit tunes in
the next preset station.
1
Turn FUNCTION dial on the fornt panel.
Every time you press this button, AM and FM
changes alternately.
2
Select a station you want by pressing
TUN. (-/+) buttons.
Adjust the volume by rotating VOLUME
2
3
/
CONTROL KNOB (or pressing VOLUME (
on the Remote Control) repeatedly.
)
otes
To listen to non-preset radio stations
• For manual tuning, see “Manual Tuning”.
• For automatic tuning, see “Automatic Tuning”.
ꢀ Automatic Tuning
Press TUN. (-/+) for more than 0.5 second.
- Scanning stops when the unit tunes in a station.
ꢀ Manual Tuning
To select a preset radio station directly
You can use the number buttons on the Remote Control
to select a preset radio station directly.
Press TUN. (-/+) briefly and repeatedly.
Press PROG./MEMO. on the Remote Control.
For example, to listen to preset station 4, press 4 on the
Remote Control. To listen to preset station 19, press 1
then 9 (within 3 seconds).
A preset number will flash in the display window.
3
4
5
Press PRESET (-/+) on the Remote Control to
select the preset number you want.
Press PROG./MEMO. again.
The station is stored.
To turn the radio off
Press POWER ( ) to turn off the unit or select another
function mode (DVD/CD, AUX or USB).
6 Repeat steps 1 (or 2) to 5 to store other stations.
For your reference
•
If a FM program is noisy
Press MONO/ST. repeatedly so that “STEREO”
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
MODE/RIF again to restore the stereo effect.
To clear all memorized stations
Press and hold PROG./MEMO. on the Remote Control
for about two seconds, “CLEAR ALL” appears in the dis-
play window and then press PROG./MEMO. on the
Remote Control, the stations are cleared.
•
To improve reception
Reposition the supplied antennas.
For your reference
If all stations have already been entered, “FULL”
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 4-5 .
To recall preset numbers
Press and hold PRESET (-/+) on the Remote Control
until the desired preset number appears or press the
button repeatedly.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
• No disc is inserted.
• Insert a disc. (Check that the DVD or, audio
CD indicator in the DVD display is lit.)
The power is on, but the
unit does not work.
• The TV is not set to receive DVD signal out-
put.
• Select the appropriate video input mode on
the TV so the picture from the unit appears
on the TV screen.
No picture.
• The video cable is not connected securely.
• The connected TV power is turned off.
• Connect the video cable into the jacks
securely.
• Turn on the TV.
• The equipment connected with the audio
cable is not set to receive DVD signal output.
• Select the correct input mode of the audio so
you can listen to the sound from the unit.
There is no sound or only
a very low-level sound is
heard.
• Connect the audio cable into the jacks
securely.
• The audio cables are not connected securely
.
• Turn on the equipment connected with the
audio cable.
• The power of the equipment connected with
the audio cable is turned off.
• Replace it with new one.
• Clean the disc.
• The audio connecting cord is damaged.
• The disc is dirty.
The playback picture is poor.
• Insert a disc. (Check that the DVD, or audio
CD indicator in the DVD display is lit.)
The unit does not start
playback.
• No disc is inserted.
• Insert a playable disc. (Check the disc type,
color system and Regional code.)
• An unplayable disc is inserted.
• Place the disc with the playback side down.
• The disc is placed upside down.
• Place the disc on the disc tray correctly
inside the guide.
• The disc is not placed within the guide.
• Clean the disc.
• The disc is dirty.
• Press the SET-UP button to turn off the menu
screen.
• A menu is on the TV screen.
• Cancel the Rating function or change the rat-
ing level.
• The Rating level is set.
• The plugs and jacks are dirty.
• The disc is dirty.
• Wipe them with a cloth slightly moistened
with alcohol.
Severe hum or noise is
heard.
• Clean the disc.
• Connect the speakers and components
securely.
• The speakers and components are
connected poorly.
• Move your TV away from the audio compo-
nents.
• The unit is located with too close to the TV.
• Connect the antenna securely.
• The antenna is positioned or connected
poorly.
Radio stations cannot be
tuned in.
• Adjust the antennas and connect an external
antenna if necessary.
• Tune in the station manually.
• The signal strength of the stations is too
weak (when tuning in with automatic tuning).
• Preset the stations.
• No stations have been preset or preset sta-
tions have been cleared (when tuning by
scanning preset stations).
The Remote Control does
not work properly.
• Point the Remote Control at the remote
sensor of the unit.
• The Remote Control is not pointed at the
remote sensor of the unit.
• Operate the Remote Control within about
23 ft (7 m).
• The Remote Control is too far from the unit.
• Remove the obstacle.
• There is an obstacle in the path of the
Remote Control and the unit.
• Replace the batteries with new ones.
• The batteries in the Remote Control are
exhausted.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
Language
Finnish
French
Code
7073
7082
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
7684
Language
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Code
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Kirghiz
Korean
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Kurdish
Laothian
Latin
Latvian, Lettish
Lingala
Singhalese
Slovak
Lithuanian
Country Code List
Choose a country code from this list.
Country
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Code
AF
AR
AU
AT
Country
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Code
ET
FJ
Country
Malaysia
Maldives
Mexico
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
Country
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
Monaco
BE
BT
Mongolia
Morocco
Nepal
Netherlands
Dutch Antilles
New Zealand
Nigeria
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
PA
PY
PH
PL
PT
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
KE
KW
LY
Kuwait
Libya
Luxembourg
RO
El Salvador
LU
Zimbabwe
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power supply
Refer to the main label.
Power consumption
Mass
70 W
4.0 kg
External dimensions (W x H x D)
187 X 255 X 257 mm
Tuner/Amplifier
FM Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
AM Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Output Power
87.5 - 108.0 MHz or 65 -74 MHz, 87.5 -108.0 MHz
10.7 MHz
60/55 dB (Mono/Stereo)
60 - 10000 Hz
522 - 1620 kHz or 520 - 1720 kHz
450 kHz
34 dB
120 - 1800 Hz
80 W + 80 W (6Ω, THD 10 %)
0.5 %
T.H.D
Frequency Response
Signal-to-noise ratio
40 - 20000 Hz
80 dB
DVD/CD player
Frequency response (audio)
Signal-to-noise ratio (audio)
Signal-to-noise ratio (video)
Dynamic range (audio)
Video output
40 - 20000 Hz
More than 75 dB (1 kHz)
More than 55 dB (1 kHz)
More than 80 dB
1.0 V (p-p), 75 Ω
S-video output
(Y) 1.0 V (p-p), 75 Ω
(C) 0.3 V (p-p), 75 Ω
Component Video output
(Y) 1.0 V (p-p), 75 Ω
(Pb)/(Pr) 0.7 V (p-p), 75 Ω
Speakers
Speaker Name
Type
Impedance
Font Speaker (L/R)
Bass Reflex 3Way 4Speaker
6 Ω
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
60 - 20000 Hz
82 dB/W (1m)
80 W
160 W
162X320X258 mm
4.0 kg
27
Download from Www.Somanuals.com. All Manuals Search And Download.
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original pur-
chaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion
of the original warranty period.
Shipping both ways will be paid by LG during the first 90
days of the Warranty Period. During the remainder of the
Warranty Period (91-365days), you pay inbound shipping
charges and LG pays return shipping charges.
Visit our website at: http://www.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELEC-
TRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES
OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST
REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED
IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty
gives you specific legal rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
•
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy,
Product Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
P/N : 3834RH0133E
Issue O
ENGLEWOOD CLIFFS, NJ
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|