LG Electronics Refrigerator LFXS30796D User Manual

OWNER’S MANUAL  
FRENCH DOOR  
REFRIGERATOR  
Please read this owner's manual thoroughly before  
operating and keep it handy for reference at all times.  
LFXS30796*  
LFXC24796*  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT FEATURES  
3
PRODUCT FEATURES  
* Depending on the model, some of the following functions may not be available.  
FILTERED WATER AND ICE DISPENSER  
The water dispenser dispenses fresh, chilled water.  
The ice dispenser dispenses cubed and crushed ice.  
DOOR ALARM  
The Door Alarm function is designed to prevent refrigerator malfunctioning  
that could occur if a refrigerator door or freezer drawer remains open. If a  
refrigerator door or freezer drawer is left open for more than 60 seconds, a  
warning alarm sounds at 30-second intervals.  
GLIDE‘N’SERVE  
Glide‘N’Serve provides storage space with a variable temperature control  
that keeps the compartment colder than the refrigerator. It is a convenient  
place to store sandwiches or meat to be cooked.  
AUTO CLOSING HINGE  
The refrigerator doors and freezer drawers close automatically with a slight  
push. (The door only closes automatically when it is open at an angle less  
than 30°.)  
ICE PLUS  
Ice production can be increased by approximately 20 percent when the  
freezer section is maintained at the coldest temperature for a 24-hour  
period.  
HUMIDITy CONTROLLED CRISPER  
The Humidity Controlled Crisper is designed to help keep your fruits and  
vegetables fresh and crisp. You can control the amount of humidity in the  
crisper by adjusting the setting between Low and High.  
INSTAVIEW DOOR-IN-DOOR  
Use this space to store frequently used items like beverages and snacks.  
Knock twice on the glass to see at a glance if you need to stock up, without  
opening the refrigerator door.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
IMPORTANT SAFETy INSTRUCTIONS  
IMPORTANT SAFETY INSTRUCTIONS  
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.  
This guide contains many important safety messages. Always read and obey all safety messages.  
This is the safety alert symbol. It alerts you to safety messages that inform you of  
hazards that can kill or hurt you or others, or cause damage to the product.  
All safety messages will be preceded by the safety alert symbol and the hazard  
signal word WARNING or CAUTION. These words mean:  
You can be killed or seriously injured if you do not follow instructions.  
WARNING  
Indicates an imminently hazardous situation which, if not avoided, may result  
in minor or moderate injury, or product damage.  
CAUTION  
WARNING  
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety  
precautions should be followed, including the following:  
Power  
y NEVER unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull it  
straight out from the outlet.  
y If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a  
similarly qualified person in order to avoid a hazard. Do not use a cord that shows cracks or abrasion  
damage along its length or at either the plug or connector end.  
y Do not use an uncertified power outlet.  
y Unplug the power plug immediately in the event of a blackout or thunderstorm.  
y Plug in the power plug with the power cord facing downward.  
Installation  
y Contact an authorized service center before you install or relocate the refrigerator.  
y When moving your refrigerator away from the wall, be careful not to roll over or damage the power  
cord.  
y Prior to use, ensure that you are connecting this product to a dedicated, grounded electrical outlet  
rated for use with this product (115V, 60Hz, AC only). It is the user’s responsibility to replace a  
standard 2-prong wall outlet with a standard 3-prong wall outlet.  
y Do not install the refrigerator where there may be a danger of the unit falling.  
Use  
y DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in the  
refrigerator. They could damage the refrigerator and seriously injure themselves.  
y Do not hang on to or place heavy objects on the refrigerator’s dispenser.  
y Do not place heavy or dangerous objects (bottles with liquid) on the refrigerator.  
y Do not put live animals inside the refrigerator.  
y Do not allow children to climb into the product when it is in use.  
y In the event of a gas leak (propane/LPG), ensure adequate ventilation and contact an authorized service  
center before resuming use. Do not touch or disassemble the electric outlet of the refrigerator.  
y In the event of a refrigerant leak, move flammable objects away from the refrigerator. Ensure adequate  
ventilation and contact an authorized service center.  
y Do not use or place flammable substances (chemicals, medicine, cosmetics, etc) near the refrigerator  
or store them inside the refrigerator. Do not place the refrigerator in the vicinity of flammable gas.  
y Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or  
personal injury if items are removed with excessive force.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETy INSTRUCTIONS  
5
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.  
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety  
precautions should be followed, including the following:  
y This product is not to be used for special purposes such as the storage of medicine or test materials  
or for use on ships, etc.  
y Unplug the power plug before cleaning or repairing the refrigerator.  
y When you replace the light bulb in the refrigerator, unplug the refrigerator or turn off the power.  
y Do not modify or extend the power cord.  
y Do not use a dryer to dry the interior. Do not light a candle to remove interior odors.  
y For your safety, this appliance must be properly grounded. Have the wall outlet and the circuit  
checked by a qualified electrician to make sure the outlet is properly grounded.  
y Do not use an outlet that can be turned off with a switch. Do not use an extension cord. It is the  
user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.  
y Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.  
y Do not use an adapter plug and plug the power plug into a multi-outlet extension cord.  
y Disconnect the power cord immediately if you hear a noise, smell a strange odor or detect smoke  
coming from the appliance.  
y Turn the power off if water or dust penetrates into the refrigerator. Call a service agent.  
y Do not disassemble or modify the refrigerator.  
y Do not put hands, feet, or metal objects below or behind the refrigerator.  
y Do not operate the refrigerator or touch the power cord with wet hands.  
y In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector  
mechanism or with the heating element that releases the cubes. Do not place fingers or hands on the  
automatic ice-making mechanism while the refrigerator is plugged in.  
y When dispensing ice from the dispenser, do not use crystal ceramics.  
y Do not touch the cold surfaces in the freezer compartment with wet or damp hands, when your  
refrigerator is in operation.  
y Do not put glass containers, glass bottles or soda in the freezer.  
y This appliance is not intended for use by persons (including children) with reduced physical, sensory  
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision  
or instruction concerning the use of the appliance by a person responsible for their safety.  
y Do not refreeze frozen food that has thawed completely. Doing so may result in a serious health  
issue.  
y If you are throwing away your old refrigerator, make sure the CFC coolant is removed for proper  
disposal by a qualified servicer. If you release CFC coolant, you may be fined or imprisoned in  
accordance with the relevant environmental law.  
y Junked or abandoned refrigerators are dangerous, even if they are sitting for only a few days. When  
disposing of the refrigerator, remove the packing materials from the door or take off the doors but  
leave the shelves in place so that children may not easily climb inside.  
y If connected to a circuit protected by fuses, use time delay fuse.  
WARNING  
This product contains chemicals known to the State of California to cause cancer and birth defects  
or other reproductive harm. Wash hands after handling.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
IMPORTANT SAFETy INSTRUCTIONS  
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.  
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety  
precautions should be followed, including the following:  
CAUTION  
Installation  
y The refrigerator must be properly installed in accordance with the Installer Instructions that were  
taped to the front of the refrigerator.  
y Be careful when you unpack and install the refrigerator. Immediately dispose of plastic and other  
packing materials out of reach of children.  
y The appliance must be positioned for easy access to a power source.  
Use  
y Close the door carefully when children are around.  
y Keep fingers out of pinch point areas; clearances between the doors and cabinets are  
necessarily small. Be careful closing doors when children are nearby.  
y If you store food improperly, be aware that it may fall and cause injury.  
y Do not use aerosols near the refrigerator.  
y Do not store articles on the top of the appliance.  
y Do not strike or apply excessive force to any glass surface. It may break.  
Maintenance  
y Do not use strong detergents like wax or thinners for cleaning. Clean with a soft cloth.  
y Wipe foreign objects (such as dust and water) off the prongs of the power plug and contact  
areas regularly.  
y Do not store, disassemble or repair the refrigerator by yourself.  
y Remove any dust or foreign matter from the power plug pins.  
y Do not use a wet or damp cloth when cleaning the plug.  
y If the refrigerator is disconnected from the power supply, you should wait for at least five  
minutes before plugging it back in.  
y If you notice a chemical or burning plastic smell or see smoke, unplug the refrigerator  
immediately and contact your LG Electronics Service Center.  
SAVE THESE INSTRUCTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPONENTS  
7
COMPONENTS  
Use this page to become more familiar with the parts and features of your refrigerator.  
The appearance and specifications of the actual product may differ depending on the model.  
Refrigerator Exterior  
InstaView  
Door-in-Door  
Filtered Water and  
Ice Dispenser  
Dispenses purified water and ice.  
Handle  
Opens and closes the  
door.  
LED Display  
Button  
Displays the refrigerator and  
freezer temperature, the water  
filter condition and the dispenser  
status.  
LED Light  
LED lights up when the  
freezer door is opened.  
Control Panel  
Sets the refrigerator and freezer  
temperatures, the water filter  
condition and the dispenser mode.  
Freezer  
Preserves frozen food.  
Ez Handle  
Easily opens the freezer  
door.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
COMPONENTS  
Refrigerator Interior  
* on some models  
Bluetooth Speaker*  
Refer to the speaker manual packed with the  
refrigerator.  
LED interior lamps  
The interior lamps light up the  
inside of the refrigerator.  
Adjustable Refrigerator Shelf  
The shelves in your refrigerator are  
adjustable to meet your individual  
storage needs.  
Water filter  
Purifies water.  
Door-in-Door Case  
A convenient storage area for  
frequently-used items that require  
easy access.  
NOTE  
The filter should be replaced every  
6 months. Please refer to the “Replacing  
the Filter” section in this  
manual for details.  
* This function may  
not be available,  
depending on the  
model.  
Indoor Ice Bin  
Ice cubes are  
automatically produced.  
Crisper  
Helps vegetables and  
fruit to stay crisp.  
Pullout Drawer  
Used for extra storage  
within the freezer  
compartment.  
Fixed Door Bin  
Used to preserve  
chilled food or drinks.  
Glide‘N’Serve  
Allows you to store food  
items at a different  
temperature than the  
regular refrigerator area.  
Auto Closing Hinge  
The refrigerator doors  
and freezer drawers close  
automatically when you push  
them slightly.  
(The door only closes  
automatically when it is open  
at an angle of less than 30°.)  
Durabase® and Durabase® Divider  
The Durabase is a storage space  
recommended for the preservation of large  
food items. The Durabase Divider is used  
to organize the Durabase area into sections.  
It can be adjusted from side to side to  
accommodate items of different sizes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
9
INSTALLATION  
Installation Overview  
Please read the following installation instructions first after purchasing this product or transporting  
it to another location.  
1
Unpacking your  
refrigerator  
2 Choosing the proper  
location  
3 Disassembling/Assembling  
4 Connecting the water  
5 Leveling and Door  
Alignment  
supply and water line  
NOTE  
Connect to potable water supply only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 INSTALLATION  
Specifications  
The appearance and specifications listed in this manual may vary due to constant product  
improvements.  
Bottom-freezer refrigerator model LFXS30796*  
Description  
French door refrigerator  
115 VAC @ 60 Hz  
Electrical requirements  
Min. / Max. Water pressure  
Dimensions  
20 – 120 psi (138 – 827 kPa)  
35 3/4" (W) X 36 1/4" (D) X 70 1/4" (H), 48 1/8" (D w/ door open)  
908 mm (W) X 921 mm (D) X 1785 mm (H), 1223 mm (D w/ door open)  
Net weight  
360 lb. (163kg)  
Bottom-freezer refrigerator model LFXC24796*  
Description  
French door refrigerator  
115 VAC @ 60 Hz  
Electrical requirements  
Min. / Max. Water pressure  
Dimensions  
20 – 120 psi (138 – 827 kPa)  
35 3/4" (W) X 30 7/8" (D) X 70 1/4" (H). 42 3/4”(D w/ door open)  
908 mm (W) X 785 mm (D) X 1785 mm (H). 1086 mm (D w/ door open)  
Net weight  
333lb. (151kg)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION 11  
Unpacking the Refrigerator  
Choosing the Proper Location  
y Select a place where a water supply can  
be easily connected for the automatic  
icemaker.  
WARNING  
y Use two or more people to move and  
install the refrigerator. Failure to do so  
can result in back or other injury.  
NOTE  
y Your refrigerator is heavy. When moving  
the refrigerator for cleaning or service,  
be sure to protect the floor. Always pull  
the refrigerator straight out when moving  
it. Do not wiggle or walk the refrigerator  
when trying to move it, as floor damage  
could occur.  
The water pressure must be 20 – 120 psi  
or 138 – 827 kPa or 1.4 – 8.4 kgf/cm². If  
the refrigerator is installed in an area with  
low water pressure (below 20 psi), you can  
install a booster pump to compensate for  
the low pressure.  
y Keep flammable materials and vapors,  
such as gasoline, away from the  
refrigerator. Failure to do so can result in  
fire, explosion, or death.  
y The refrigerator should always be plugged  
into its own individual properly grounded  
electrical outlet rated for 115 Volts, 60 Hz,  
AC only, and fused at 15 or 20 amperes.  
This provides the best performance  
and also prevents overloading house  
wiring circuits which could cause a fire  
hazard from overheated wires. It is  
Remove tape and any temporary labels from your  
refrigerator before using. Do not remove any  
warning labels, the model and serial number label,  
or the Tech Sheet that is located under the front  
of the refrigerator.  
recommended that a separate circuit  
serving only this appliance be provided.  
WARNING  
To remove any remaining tape or glue, rub the  
area briskly with your thumb. Tape or glue residue  
can also be easily removed by rubbing a small  
amount of liquid dish soap over the adhesive with  
your fingers. Wipe with warm water and dry.  
To reduce the risk of electric shock, do not  
install the refrigerator in a wet or damp  
area.  
Do not use sharp instruments, rubbing alcohol,  
flammable fluids, or abrasive cleaners to remove  
tape or glue. These products can damage the  
surface of your refrigerator.  
Flooring  
To avoid noise and vibration, the unit must be  
leveled and installed on a solidly constructed  
floor. If required, adjust the leveling legs to  
compensate for the unevenness of the floor.  
The front should be slightly higher than the  
rear to aid in door closing. Leveling legs can  
be turned easily by tipping the cabinet slightly.  
Turn the leveling legs to the left to raise the  
unit or to the right to lower it. (See Leveling  
and Door AlIgnment.)  
Refrigerator shelves are installed in the shipping  
position. Please reinstall shelves according to  
your individual storage needs.  
NOTE  
Installing on carpeting, soft tile surfaces,  
a platform or weakly supported structure  
is not recommended.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 INSTALLATION  
Ambient Temperature  
Removing/Assembling the  
Refrigerator Door Handles  
Install this appliance in an area where the  
temperature is between 55°F (13°C) and 110°F  
(43°C). If the temperature around the appliance  
is too low or high, cooling ability may be  
adversely affected.  
NOTE  
When it is necessary to move the  
refrigerator through a narrow opening,  
removing the doors is the recommended  
procedure. If it is necessary to remove  
the handles, follow the directions below.  
Measuring Clearances  
Too small of a distance from adjacent items  
may result in lowered freezing capability and  
increased electricity consumption charges.  
Allow at least 24 inches (61 cm) in front of the  
refrigerator to open the doors, and at least  
2 inches (5.08 cm) between the back of the  
refrigerator and the wall.  
Removing the Handles  
Loosen the set screws with a 3/32 in.  
1
Allen wrench and remove the handle.  
Loosen the mounting fasteners that  
2
connect to the refrigerator door and handle  
using a 1/4 in. Allen wrench, and remove  
the mounting fasteners.  
24” (61 cm)  
2” (5.08 cm)  
Assembling the Handles  
Assemble the mounting fasteners at  
both ends of the handle using a 1/4 in.  
Allen wrench.  
1
Place the handle on the door by fitting  
2
the handle footprints over the mounting  
fasteners and tightening the set screws  
with a 3/32 in. Allen wrench.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION 13  
Removing/Assembling the  
Freezer Drawer Handle  
Removing/Assembling the  
Doors and Drawers  
Removing the Handles  
When it is necessary to move the refrigerator  
through a narrow opening, removing the doors  
is the recommended procedure.  
Loosen the set screws located on the  
1
lower side of the handle with a 1/8 in. Allen  
wrench and remove the handle.  
WARNING  
y If your entrance door is too narrow for the  
refrigerator to pass through, remove the  
refrigerator doors and move the refrigerator  
sideways through the doorway.  
Loosen the mounting fasteners that  
2
connect to the  
freezer drawer  
and handle  
y Use two or more people to remove and  
install the refrigerator doors. Failure to do  
so can result in back or other injury.  
using a 1/4 in.  
Allen wrench,  
and remove  
the mounting  
fasteners.  
y Disconnect the electrical supply to the  
refrigerator before installing. Failure to do  
so could result in serious injury or death.  
y Do not put hands, feet or other objects into  
the air vents or bottom of the refrigerator.  
You may be injured or receive an electrical  
shock.  
Assembling the Handles  
Assemble the mounting fasteners at  
1
y Be careful when handling the hinge and  
stopper, to avoid injury.  
both ends of the handle using a 1/4 in. Allen  
wrench.  
y Remove food and bins before detaching the  
doors and drawers.  
Place the handle on the door by fitting  
2
the handle  
footprints over  
the mounting  
fasteners and  
tightening the  
set screws  
with a 1/8 in.  
Allen wrench.  
WARNING  
When assembling or disassembling the  
handle:  
y Grasp the handle tightly to avoid dropping it.  
y Do not swing the handle into nearby people  
or animals.  
y Make sure that the bracket hole of the  
handle fits properly into the stopper bolt of  
the door. Assemble the set screws to fix  
the handle into place.  
y Make sure that there is not a gap between  
the door and handle after assembling the  
handle.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 INSTALLATION  
Rotate the hinge lever counterclockwise  
. Lift the top hinge free of the hinge  
lever latch.  
Removing the Left Refrigerator Door  
4
The water supply is connected to the  
1
upper right part of the rear surface of the  
refrigerator. Remove the ring in the joint  
area. Hold the water supply connection  
and gently push the collet to detach the  
water supply line as shown in and  
.
Hinge Lever Latch  
Collet  
CAUTION  
When lifting the hinge free of the latch, be  
careful that the door does not fall forward.  
NOTE  
Detachment of the water supply line is  
applicable only when detaching the left  
refrigerator door.  
Lift the door from the middle hinge pin and  
remove the door.  
5
Remove the screw from the hinge cover  
2
at the top of the refrigerator. Lift the hook  
(not visible), located at the bottom of the  
front side of the cover with a flat-head  
screwdriver.  
CAUTION  
Place the door, inside facing up, on a  
non-scratching surface.  
Remove the cover and pull out the tube  
.
3
Disconnect all wire harnesses . Unscrew  
3
the ground wire  
.
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION 15  
Removing the Right Refrigerator  
Door  
Rotate the hinge lever clockwise.  
3
Lift the top hinge free of the hinge  
lever latch.  
Remove the screw from the top hinge  
1
cover . Lift the hook (not visible), located  
at the bottom of the front side of the cover  
, with a flat-head screwdriver.  
Hinge Lever Latch  
CAUTION  
When lifting the hinge free of the hinge  
lever latch, be careful that the door  
does not fall forward.  
Detach the wire harnesses . Unscrew  
2
Lift the door from the middle hinge pin and  
remove the door.  
4
the ground wire  
.
CAUTION  
Place the door on the floor, inside  
facing up, on a non-scratching surface.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 INSTALLATION  
Assembling the Right Refrigerator Door  
Install the right-side door first.  
Connect the wire harnesses . Srew the  
3
ground wire  
.
Make sure that the plastic sleeve is  
1
inserted in the bottom of the door. Lower  
the door onto the middle hinge pin as  
shown in the figure.  
Make sure that the door-switch located  
4
inside the cover is tightly connected.  
Position the cover in place. Insert and  
Fit the hinge over the hinge lever latch  
2
and slot it into place. Rotate the lever  
counterclockwise to secure the hinge.  
tighten the cover screw  
.
Hinge Lever Latch  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION 17  
Push the water supply tube into the hole  
Assembling the Left Refrigerator  
Door  
4
on the top case and pull it through the  
backplate.  
Install the left refrigerator door after the right  
door is installed.  
Make sure that the plastic sleeve is  
1
inserted in the bottom of the door. Install  
the refrigerator door onto the middle hinge.  
Hold the water supply connection and  
gently push in the collet to connect the  
5
water supply line as shown in and  
.
Insert the tube at least 5/8 inch (15 mm) into  
the connector. Fasten the clip to the joint.  
Fit the hinge over the hinge lever latch  
2
and slot it into place. Rotate the lever  
clockwise and fasten the hinge.  
Collet  
Hinge Lever Latch  
Screw the ground wire . Make sure that  
6
the door-switch located inside the cover  
is tightly connected. Place the cover in  
3
position and tighten the cover screw  
.
Connect all the wire harnesses.  
3
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 INSTALLATION  
Removing the Freezer Drawers  
NOTE  
In the following figures, the Pullout Drawer  
located above the freezer drawer is not shown  
for clarity.  
Collet  
Tube  
CAUTION  
y Use two or more people to remove and  
install the freezer drawer. Failure to do so  
can result in back or other injury.  
y Do not hold the handle when removing  
or replacing the drawer. The handle may  
come off, causing personal injury.  
Insert Line  
Clip  
1) Gently press the Collet and insert the  
tube until only one line shows on the  
tube.  
y Be careful of sharp hinges on both sides  
of the drawer.  
y When you lay the drawer down, be  
careful not to damage the floor.  
y Do not sit or stand on the freezer drawer.  
(Correct)  
y To prevent accidents, keep children  
and pets away from the drawer. Do not  
leave the drawer open. If the Durabase®  
storage bin is removed from the freezer  
drawer, there is sufficient space for a  
small child or pet to crawl inside.  
(Incorrect)  
2) Pull the tube to make sure that the  
tube is tightly fastened and then insert  
the clip.  
®
(Durabase )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION 19  
Pull the drawer open to full extension.  
Gently lift and pull out the ice bin.  
Remove the screws from the rails at both  
ends.  
1
2
3
Grip both sides of the drawer and pull it up to  
remove it from the rails.  
4
CAUTION  
Do not hold the handle when removing  
or replacing the drawer. The handle may  
come off, causing personal injury.  
On the left rail, use a flat blade screwdriver  
to push in on the tab to release the drawer  
from the rail, as shown below. Once the  
left side is loose, push the tab on the right  
side with your finger to release the drawer.  
Lift the front of the drawer up, then pull it  
straight out.  
Hold both rails and push them in  
simultaneously.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 INSTALLATION  
Assembling the Freezer Drawers  
Lower the door into its final position and  
tighten the screws located on both sides.  
3
Pull out both rails simultaneously, until both  
1
rails are fully extended.  
Grasp the drawer on each side and hook the  
2
Insert the drawer into the frame, and push  
4
drawer supports into the rail tabs located on  
both sides.  
the drawer back into place until you hear a  
click.  
Insert the Durabase in the rail assembly.  
5
CAUTION  
Do not hold the handle when removing  
or replacing the drawer. The handle  
may come off, causing personal injury.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION 21  
Connecting the Water Line  
Before You Begin  
CAUTION  
This water line installation is not covered by the  
refrigerator warranty. Follow these instructions  
carefully to minimize the risk of expensive water  
damage.  
Wear eye protection during installation  
to prevent injury.  
If the water pressure from the reverse osmosis  
system is less than 20 psi or 138 kPa or 1.4 kgf/  
cm² (takes more than 4.0 sec to fill a cup of 7 oz  
or 198 cc capacity):  
Water hammer (water banging in the pipes) in  
house plumbing can cause damage to refrigerator  
parts and can lead to water leakage or flooding.  
Call a qualified plumber to correct water hammer  
before installing the water supply line to the  
refrigerator.  
y Check to see if the sediment filter in  
the reverse osmosis system is blocked.  
Replace the filter if necessary.  
y Allow the storage tank on the reverse  
osmosis system to refill after heavy  
usage.  
CAUTION  
To prevent burns and product damage,  
only connect the refrigerator water line to  
a cold water supply.  
y If the issue concerning water pressure  
from reverse osmosis remains, call a  
licensed, qualified plumber.  
y All installations must be in accordance  
with local plumbing code requirements.  
If you use your refrigerator before connecting  
the water line, make sure the icemaker power  
button is turned off.  
What You Will Need  
CAUTION  
Do not install the icemaker tubing in  
areas where temperatures fall below  
freezing.  
Copper Tubing,  
y
¼ in. outer diameter, to  
connect the refrigerator to the water  
supply. Be sure both ends of the tubing  
are cut square.  
y To determine how  
much tubing you need:  
measure the distance  
from the water valve on the back of  
the refrigerator to the water supply  
pipe. Then, add 8 feet (2.4 m). Be sure  
there is sufficient extra tubing (about 8  
feet [2.4 m] coiled into 3 turns of about  
10 in. [25 cm] diameter) to allow the  
refrigerator to move out from the wall  
after installation.  
Water Pressure  
The water pressure must be between 20 and  
120 psi. If the refrigerator is installed in an area  
with low water pressure (below 20 psi), you can  
install a booster pump to compensate for the low  
pressure.  
Power drill.  
If a reverse osmosis water filtration system is  
connected to your cold water supply, this water  
line installation is not covered by the refrigerator  
warranty. Follow the instructions carefully to  
minimize the risk of expensive water damage.  
y
y
½ in. or adjustable  
wrench.  
Flat blade and Phillips  
head screwdrivers.  
y
y
Two ¼ in. outer  
diameter compression  
nuts and 2 ferrules (sleeves)  
copper tubing to the shutoff valve and  
the refrigerator water valve.  
If a reverse osmosis water filtration system is  
connected to your cold water supply, the water  
pressure to the reverse osmosis system needs  
to be a minimum of 40 to 60 psi (276-414 kPa or  
2.8-4.2 kgf/cm², less than 2.0-3.0 sec. to fill a cup  
of 7 oz or 198 cc capacity).  
to connect the  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 INSTALLATION  
Water Line Installation Instructions  
y If your existing copper water line has a  
flared fitting at the end, you will need  
adapter  
an  
(available at plumbing supply  
WARNING  
stores) to connect the water line to the  
refrigerator OR you can cut off the flared  
fitting with a tube  
When using any electrical device  
(such as a power drill) during  
installation, be sure the device is  
battery powered, double insulated  
or grounded in a manner that will  
prevent the hazard of electric shock.  
cutter and then use a  
compression fitting.  
Shutoff valve to  
connect to the cold water line.  
y
The shutoff  
valve should have a water inlet with a  
minimum inside diameter of 5/32 in. at  
the point of connection to the COLD  
WATER LINE. Saddle-type shutoff valves  
are included in many water supply kits.  
Before purchasing,  
Install the shutoff valve on the nearest  
frequently used drinking water line.  
SHUT OFF THE MAIN WATER SUPPLY  
1
Turn on the nearest faucet to relieve the  
pressure on the line.  
make sure a saddle-  
type valve complies  
with your local  
plumbing codes.  
CHOOSE THE VALVE LOCATION  
2
Choose a location for  
the valve that is easily  
accessible. It is best to  
NOTE  
connect into the side of a  
vertical water pipe. When  
it is necessary to connect  
into a horizontal water  
A self piercing saddle type water valve  
should not be used.  
pipe, make the connection to the top or  
side, rather than at the bottom, to avoid  
drawing off any sediment from the water  
pipe.  
DRILL THE HOLE FOR THE VALVE  
3
Drill a ¼ in. hole in  
the water pipe using  
a sharp bit. Remove  
any burrs resulting  
from drilling the hole  
in the pipe. Be careful  
not to allow water  
to drain into the drill. Failure to drill a ¼ in.  
hole may result in reduced ice production  
or smaller cubes.  
NOTE  
The hookup line cannot be white, plastic  
tubing. Licensed plumbers must use  
only copper tubing (NDA tubing #49595  
or #49599) or Cross Link Polyethylene  
(PEX) tubing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION 23  
FASTEN THE SHUTOFF VALVE  
CONNECT THE TUBING TO THE VALVE  
4
7
Fasten the shutoff valve to the cold water  
pipe with the pipe clamp.  
Place the compression nut and ferrule (sleeve)  
for copper tubing onto the end of the tubing  
and connect it to the shutoff valve. Make  
sure the tubing is fully inserted into the valve.  
Tighten the compression nut securely.  
Pipe Clamp  
Saddle-Type  
Shutoff Valve  
Compression  
Nut  
Saddle-Type  
Shutoff Valve  
Vertical Cold  
Water Pipe  
Packing Nut  
Outlet Valve  
NOTE  
Ferrule (sleeve)  
Commonwealth of Massachusetts  
Plumbing Codes 248CMR shall be  
adhered to. Saddle valves are illegal  
and their use is not permitted in  
Massachusetts. Consult with a licensed  
plumber.  
FLUSH OUT THE TUBING  
8
9
Turn the main water supply on and flush out  
the tubing until the water is clear.  
Shut the water off at the  
water valve after about  
one quart of water has  
been flushed through the  
tubing.  
TIGHTEN THE PIPE CLAMP  
5
Tighten the clamp screws until the sealing  
washer begins to swell.  
CONNECT THE TUBING TO THE  
REFRIGERATOR  
NOTE: Do not overtighten the clamp  
or you may crush the tubing.  
Washer  
WARNING  
Inlet End  
Pipe Clamp  
Before making the connection to the  
refrigerator, be sure that the refrigerator  
power cord is not plugged into the wall  
outlet.  
Clamp Screw  
a. Remove the plastic flexible cap from the  
water valve.  
b. Place the compression nut and ferrule  
(sleeve) onto the end of the tubing as  
shown.  
ROUTE THE TUBING  
6
Route the tubing between the cold water  
line and the refrigerator.  
c. Insert the end of the copper tubing into  
the connection as far as possible. While  
holding the tubing, tighten the fitting.  
Route the tubing through a hole drilled in  
the wall or floor (behind the refrigerator or  
adjacent base cabinet) as close to the wall  
as possible.  
¼ in. Tubing  
Tubing Clamp  
NOTE  
¼ in.  
Compression  
Nut  
Be sure there is sufficient extra tubing  
(about 8 feet coiled into 3 turns of  
about 10 in. diameter) to allow the  
refrigerator to move out from the wall  
after installation.  
Ferrule  
(sleeve)  
Refrigerator  
Connection  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 INSTALLATION  
TURN THE WATER ON AT THE SHUTOFF  
Turning On the Power  
10  
VALVE  
Tighten any connections that leak.  
Plug in the refrigerator.  
1
CAUTION  
Check to see if leaks occur at the water  
line connections.  
CAUTION  
y Connect to a rated power outlet.  
y Have a certified electrician check  
the wall outlet and wiring for proper  
grounding.  
y Do not damage or cut off the ground  
terminal of the power plug.  
PLUG IN THE REFRIGERATOR  
11  
Arrange the coil of tubing so that it  
does not vibrate against the back of the  
refrigerator or against the wall. Push the  
refrigerator back to the wall.  
START THE ICEMAKER  
12  
Turn the icemaker on at the control panel.  
The icemaker will not begin to operate  
until it reaches its operating temperature  
of 15°F (–9°C) or below. It will then begin  
operation automatically if the icemaker has  
been turned on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION 25  
Leveling and Door Alignment  
Door Alignment  
Leveling  
The left refrigerator door has an adjustable nut,  
located on the bottom hinge, to raise and lower  
the door for proper alignment.  
After installing, plug the refrigerator’s power  
cord into a 3-prong grounded outlet and push  
the refrigerator into the final position.  
If the space between the doors is uneven, follow  
the instructions below to align the doors evenly:  
The refrigerator has two front leveling legs—  
one on the right and one on the left. Adjust the  
legs to alter the tilt from front-to-back or side-  
to-side. If the refrigerator seems unsteady, or  
you want the doors to close more easily, adjust  
the refrigerator’s tilt using the instructions  
below:  
Use the wrench (included with the owner’s  
manual) to turn the nut in the door hinge to adjust  
the height. Turn to the right to raise or to the left  
to lower the height.  
Turn the leveling leg to the left to raise  
1
that side of the refrigerator or to the right  
to lower it. It may take several turns of the  
leveling leg to adjust the tilt of the  
refrigerator.  
The right refrigerator door does not have an  
adjustable nut.  
If the space between the doors is uneven, follow  
the instructions below to align the right door:  
With one hand, lift up both the inner and  
1
outer door sections of the right door to raise  
them at the middle hinge. (Opening the door  
may make lifting it easier)  
NOTE  
With the other hand, use pliers to insert the  
2
snap ring on the middle hinge of the inner  
door section as shown. Do not insert the ring  
on the hinge of the outer door section.  
A flare nut wrench works best, but an  
open-end wrench will suffice.  
Do not over-tighten.  
Insert additional snap rings until the right door  
is aligned. (Two snap rings are provided with  
the unit.)  
3
Open both doors again and check to make  
2
sure that they close easily. If the doors do  
not close easily, tilt the refrigerator slightly  
more to the rear by turning both leveling  
legs to the left. It may take several more  
turns, and you should turn both leveling  
legs the same amount.  
Outer Inner  
Door  
Door  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 HOW TO USE  
HOW TO USE  
Before use  
Clean the refrigerator.  
Clean your refrigerator thoroughly and wipe off all dust that accumulated during  
shipping.  
CAUTION  
y Do not scratch the refrigerator with a sharp object or use a detergent that  
contains alcohol, a flammable liquid or an abrasive when removing any tape  
or adhesive from the refrigerator,.  
y Do not peel off the model or serial number label or the technical information  
on the rear surface of the refrigerator.  
NOTE  
Remove adhesive residue by wiping it off with your thumb or dish detergent.  
Open refrigerator doors and freezer drawers to ventilate the interior.  
The inside of the refrigerator may smell like plastic at first. Remove any adhesive  
tape from inside the refrigerator and open the refrigerator doors and the freezer  
drawers for ventilation.  
Connect the power supply.  
Check if the power supply is connected before use.  
Read the “Turning On the Power” section.  
Turn off the icemaker if the refrigerator is not yet connected to the  
water supply.  
Turn off the automatic icemaker and then plug the power plug of the refrigerator  
into the grounded electrical outlet.  
* This is applicable only to certain models.  
CAUTION  
Running the automatic icemaker before connecting it to the water  
supply may cause the refrigerator to malfunction.  
Wait for the refrigerator to cool.  
Allow your refrigerator to run for at least two to three hours before putting food in  
it. Check the flow of cold air in the freezer compartment to ensure proper cooling.  
CAUTION  
Putting food in the refrigerator before it has cooled could cause the  
food to spoil, or a bad odor could linger inside the refrigerator.  
The refrigerator makes a loud noise after initial operation.  
This is normal. The volume will decrease as the temperature lowers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 27  
Control Panel  
Depending on the model, some of the following functions may not be available.  
Control Panel Features  
Ice Type  
Press the Ice Type button to choose either cubed  
or crushed ice. The cubed or crushed ice icon will  
illuminate.  
Refrigerator Temperature  
Indicates the set temperature of the refrigerator  
compartment in Celsius (°C) or Fahrenheit (°F).  
Freezer Temperature  
Indicates the set temperature of the freezer  
compartment in Celsius (°C) or Fahrenheit (°F).  
To change the temperature mode from °F to °C  
(or vice versa) press and hold the Refrigerator  
and Freezer temperature buttons simultaneously  
for approximately five seconds. The temperature  
indication on the display window switches  
between Celsius and Fahrenheit.  
NOTE  
The displayed temperature is the target  
temperature, and not the actual temperature  
of the refrigerator. The actual refrigerator  
temperature depends on the food inside the  
refrigerator.  
(On some  
models)  
[
]
Fresh Air Filter  
The Fresh Air Filter helps remove odors from the  
refrigerator. The Fresh Air Filter has two settings,  
Auto and Power(PWR). In Auto mode, the Fresh  
Air Filter will cycle on and off in increments of  
ten minutes on and 110 minutes off. If set to the  
Power(PWR) mode, the Fresh Air Filter will stay  
on continuously for four hours, cycling on and off  
in increments of ten minutes on and five minutes  
off. After four hours, the Fresh Air Filter will  
switch back to Auto mode.  
LED Display  
Indicator  
Control  
Button  
y
Press the Air Filter button once for  
Power(PWR) mode.  
y
Press the Air Filter button again to switch  
back to Auto mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 HOW TO USE  
Control Panel Features (continued)  
Change Water Filter  
When the water filter indicator turns on, you  
need to change the water filter. After changing  
the water filter, press and hold the Change Filter  
button for three seconds to turn the indicator  
light off. You need to change the water filter  
approximately every six months.  
(On some  
models)  
[
]
Change Filter  
When the Change Filter icon turns on, the air  
filter needs to be replaced. After replacing the air  
filter, press and hold the Fresh Air Filter button for  
three seconds to turn the icon light off. Changing  
the air filter approximately every six months is  
recommended.  
Door Alarm  
y When power is connected to the refrigerator,  
the door alarm is initially set to ON. When you  
press the Door Alarm button, the display will  
change to OFF and the Door Alarm function will  
deactivate.  
Ice Plus  
This function increases both ice making and  
freezing capabilities.  
y When either the refrigerator or the freezer  
door is left open for more than 60 seconds, the  
alarm tone will sound to let you know that the  
door is open.  
y When you touch the Ice Plus button, the  
graphic will illuminate in the display and  
will continue for 24 hours. The function will  
automatically shut off after 24 hours.  
y When you close the door, the door alarm will  
stop.  
y You can stop this function manually by touching  
the button one more time.  
Lock  
Ice On/Off  
The Lock function disables every other button  
on the display.  
Press the Ice On/Off button for three seconds to  
turn the icemaker on/off.  
y When power is initially connected to the  
refrigerator, the Lock function is off.  
y If you want to activate the Lock function to lock  
other buttons, press and hold the Lock button  
for three seconds or more. The Lock icon will  
display and the Lock function is now enabled.  
Light  
When you press the Light button, the dispenser  
light will turn on and the indicator will appear on  
the LED display.  
y To disable the Lock function, press and hold the  
Lock button for approximately three seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 29  
Power Saving Mode  
Connect  
The Connect button, when used with the LG  
Smart Refrigerator smart phone app, allows  
the refrigerator to connect to your home’s Wi-  
Fi network. Refer to the following page for  
information on the initial setup of the application.  
y When the refrigerator is in the Power Saving  
Mode, the display will remain off until a door  
is opened or a button is pressed. Once on, the  
display will remain on for 20 seconds.  
The Connect icon allows you to check the status  
of the refrigerator’s network connection. When  
the refrigerator is connected to the network, the  
Connect icon is illuminated.  
CAUTION  
Display Mode (For Store Use Only)  
The Display Mode disables all cooling in the  
refrigerator and freezer sections to conserve  
energy while on display in a retail store. When  
activated OFF will display on the control panel  
and the display will remain on for 20 seconds.  
Press and hold the Connect button for 3 seconds  
to connect to the network. The icon will blink  
while the connection is being made, then turn  
on once the connection is successfully made. To  
disconnect, press and hold the button again.  
To deactivate / activate:  
Smart Grid  
With either refrigerator door opened, press  
and hold the Refrigerator and Ice Plus buttons  
at the same time for five seconds. The control  
panel will beep and the temperature settings  
will display to confirm that Display Mode  
is deactivated. Use the same procedure to  
activate the Display Mode.  
Press the Smart Grid button to turn the Smart  
Grid function On/Off. When the function is on,  
the icon will illuminate. The Smart Grid function  
automatically turns on when the refrigerator is  
connected to the Wi-Fi network.  
When the refrigerator is responding to a Demand  
Response (DR) message from the electric  
company, the Grid text will illuminate.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 HOW TO USE  
Smart Features  
To use the Smart Features on your refrigerator, you will need the following devices and apps:  
1. a wireless router and home Wi-Fi network  
2. the LG Smart Grid refrigerator  
3. an Android-based smart phone  
4. the LG Smart Refrigerator app from the Google Play Store.  
NOTE  
To use the Smart Grid feature, you must also register for the Smart Grid (Demand Response)  
service with your local electric utility company. The company must provide Demand Response  
service.  
Setting Up the Smart App and Connecting the Refrigerator  
Create an account at Smart ThinQ.  
If necessary, enter the password for your  
1
7
8
router and click the connect button in the  
app.  
You will use the ID and password from this  
account in the smart phone application.  
Make sure the refrigerator display is active  
by pressing any button. Press and hold the  
Smart Grid button on the refrigerator for  
three seconds. The Connect LED should  
blink while the connection is being made.  
Download the smart phone app from the  
2
Google Play Store. (LG Smart Refrigerator  
app)  
In the app, select the Smart Model.  
3
4
Log in to the app using the Smart ThinQ ID  
and password created in step 1.  
When prompted, select the Non Touch  
Screen Model.  
5
6
The app will automatically go through the  
9
1
Choose your home wireless router  
process of registering your product on  
the network, using the information you’ve  
provided. This may take some time, and  
the Connect LED will continue to blink  
during this process. After the registration  
process is completed, a message is  
displayed and the app will proceed to the  
Home screen.  
from the list of routers in the app. Your  
refrigerator and smart phone must both be  
connected to the same Wi-Fi network.  
NOTE  
You must connect the refrigerator to the  
internet using a wireless router on your  
home network. Tethering to a mobile phone,  
hotspot, or an unsecured network, for  
example, will cause unstable functionality.  
Check that the Connect LED is illuminated  
0
to confirm that the Wi-Fi network is  
connected. You can now use the app  
to control the Smart Features on your  
refrigerator.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 31  
LG Smart Refrigerator App - What’s  
Included  
Using the Smart Grid Function  
This feature responds to notification events  
from your utility company to run high energy-  
consuming tasks during off-peak periods when  
demand is lower. These notification events are  
known as Demand Response signals.  
Food Manager  
Allows you to keep track of items in your  
refrigerator and freezer, so you can be alerted  
when they are near their use-by dates, generate  
grocery lists, and link to related recipes.  
If the refrigerator receives a Demand Response  
signal from the utility company, the refrigerator  
will turn on the Grid LED on the refrigerator  
display and control its power consumption  
according to the signal.  
Recipes  
Features recipes from the Food Channel,  
searchable by ingredient, course, cuisine, total  
time required, and the food in your refrigerator  
(if entered in the Food Manager). Automatically  
makes grocery lists from chosen recipes.  
The refrigerator will respond to the signals  
received from the utility company as long as  
product performance is maintained.  
If the refrigerator receives a Demand Response  
signal, the refrigerator will operate in Delay  
Appliance Load (DAL) or Temporary Appliance  
Load Reduction (TALR) mode.  
Grocery  
Makes and manages grocery lists from items in  
your refrigerator or recipes.  
Refrigerator Manager  
Allows you to control the refrigerator and freezer  
temperature settings, air filter, water filter, Ice  
Plus, Smart Saving, and Energy Monitoring from  
your smart phone.  
Delay Appliance Load (DAL): The refrigerator  
responds to a DAL signal by providing a moderate  
load reduction for the duration of the delay period.  
This mode controls functions that consume a lot  
of energy such as adjusting the cooling system,  
running the defrost cycle, and making ice.  
Smart Diagnosis  
Allows you to diagnose and troubleshoot  
problems with your refrigerator.  
- When the refrigerator operates in DAL mode,  
the Grid LED is illuminated on the refrigerator  
display.  
Settings  
- DAL mode is automatically deactivated after it  
lasts for the amount of time stipulated by the  
DAL signal (max. 4 hours) or when you override  
the Smart Grid function.  
Allows you to set various options on the  
refrigerator and in the app.  
Temporary Appliance Load Reduction (TALR) :  
The refrigerator responds to a TALR signal by  
aggressively reducing the load for a short time  
period, typically 10 minutes. This mode reduces  
energy consumption by stopping the compressor  
and controlling the functions that consume a lot  
of energy such as the defrost cycle and fan.  
Smart Grid Function  
When the refrigerator operates in Smart Grid  
mode, the Smart Refrigerator function can control  
energy usage or delay the operation of some  
functions to save energy during peak usage  
periods.  
- When the refrigerator operates in TALR mode,  
the Grid LED is illuminated on the refrigerator  
display.  
y You can override the Smart Grid function  
at any time (using the Smart Grid button or  
application).  
- TALR mode is automatically deactivated after it  
lasts for the received duration (max. 10 minutes),  
or when you override the Smart Grid function.  
The mode is immediately deactivated and the  
refrigerator returns to its normal state when the  
door is opened or closed, or the dispenser is  
used.  
y To use the Smart Grid function, you need to  
register your appliance with your electric utility  
company.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 HOW TO USE  
Smart Grid Application Features  
Smart Features (continued)  
Smart Saving_Demand Response  
1
Override Smart Grid Mode  
You can lower energy usage based on  
Demand Response (DR) signals from the  
utility company.  
If you want the refrigerator to ignore the Demand  
Response signal from the utility company, you  
can override the Smart Grid function by pushing  
the Smart Grid button while the refrigerator is in  
Smart Grid mode.  
If the refrigerator is operating in Smart  
Saving mode according to the DR signal,  
you can see a pop up.  
When you override the Smart Grid function, the  
refrigerator ignores the Demand Response signal  
and is no longer controlled by the utility company  
until the next Demand Response signal is sent.  
Smart Saving_Delay Defrost  
Lower energy usage based on time period.  
Energy monitoring  
2
You can also override the Smart Grid function  
using the smart phone app.  
The refrigerator can check number of door  
openings and power consumption.  
Remote Control  
3
Open API  
You can control the Refrigerator  
Temperature, Fresh Air Filter and Ice Plus  
from the smart phone app.  
LG Open API  
You can manage Smart Grid features for the LG  
Smart Refrigerator.  
Push messages.  
4
Please check the detailed specifications on the  
notice page on us.smartthinq.com.  
- When the door is open over ten minutes,  
you will receive a push message.  
- When Ice Plus is finished, you will receive  
a push message.  
API list :  
Demand response  
- Send demand response signal  
Open Source Software Notice  
Information  
Power saving  
- Set saving mode  
- Get schedule of DR/Delay Defrost  
To obtain the source code under GPL, LGPL, MPL,  
and other open source licenses, that is contained  
com. In addition to the source code, all referred  
license terms, warranty disclaimers and copyright  
notices are available for download.  
Energy monitoring  
- Get setting temperature  
- Get door open event  
- Get energy consumption  
Delay defrost capability  
- Insert a delay defrost schedule event  
- Update a delay defrost schedule event  
- Delete a delay defrost schedule event  
- Get the delay defrost schedule  
LG Electronics will also provide open source  
code to you on CD-ROM for a charge covering  
the cost of performing such distribution (such as  
the cost of media, shipping, and handling) upon  
email request to [email protected]. This offer  
is valid for three (3) years from the date on which  
you purchased the product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 33  
FCC Notice (For transmitter module  
contained in this product)  
FCC RF Radiation Exposure Statement  
This equipment complies with FCC radiation  
exposure limits set forth for an uncontrolled  
environment. This transmitter must not be co-  
located or operating in conjunction with any other  
antenna or transmitter.  
This equipment should be installed and operated  
with minimum distance 20 cm (7.8 inches)  
between the antenna and your body. Users must  
follow the specific operating instructions for  
satisfying RF exposure compliance.  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if  
not installed and used in accordance with the  
instructions, may cause harmful interference  
to radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning  
the equipment off and on, the user is encouraged  
to try to correct the interference by one or more  
of the following measures:  
Industry Canada Statement (For  
transmitter module contained in this  
product)  
This device complies with Industry Canada’s  
licence-exempt RSSs. Operation is subject to the  
following two conditions:  
- Reorient or relocate the receiving antenna.  
1) this device may not cause interference; and  
2) this device must accept any interference,  
including interference that may cause undesired  
operation of the device.  
- Increase the separation between the equipment  
and the receiver.  
- Connect the equipment to an outlet on a circuit  
different from that to which the receiver is  
connected.  
This Class B digital apparatus complies with  
Canadian ICES-003.  
- Consult the dealer or an experienced radio/TV  
technician for help.  
This device complies with part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions:  
IC Radiation Exposure Statement  
This equipment complies with IC radiation  
exposure limits set forth for an uncontrolled  
environment. This equipment should be installed  
and operated with minimum distance 20 cm  
(7.8 inches) between the antenna & your body.  
1) this device may not cause harmful interference  
and  
2) this device must accept any interference  
received, including interference that may cause  
undesired operation of the device.  
NOTE  
Any changes or modifications in construction of  
this device which are not expressly approved by  
the party responsible for compliance could void  
the user’s authority to operate the equipment.  
The manufacturer is not responsible  
for any radio or TV interference caused  
by unauthorized modifications to this  
equipment. Such modifications could  
void the user’s authority to operate the  
equipment.  
Wireless LAN Module (LCW-003) Specifications  
Frequency Range  
2412~2462 MHz  
Output Power  
(max.)  
IEEE 802.11b: 17.56 dBm  
IEEE 802.11g: 25.53 dBm  
IEEE 802.11n: 25.29 dBm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 HOW TO USE  
In-Door Ice Bin  
* Depending on the model, some of the  
following functions may not be available.  
To remove the in-door ice bin, grip the  
2
front handle, slightly lift the lower part,  
and slowly pull out the bin as shown.  
CAUTION  
y Keep hands and tools out of the ice  
compartment door and dispenser chute.  
Failure to do so may result in damage or  
personal injury.  
y The icemaker will stop producing ice when  
the in-door ice bin is full. If you need more  
ice, empty the ice bin into the extra ice bin  
in the freezer compartment. During use,  
the ice can become uneven causing the  
icemaker to misread the amount of ice  
cubes and stop producing ice. Shaking the  
ice bin to level the ice within it can reduce  
this problem.  
Assembling the In-Door Ice Bin  
y Storing cans or other items in the ice bin will  
damage the icemaker.  
Carefully insert the in-door ice bin while  
1
y Keep the ice compartment door closed  
tightly. If the ice compartment door is not  
closed tightly, the cold air in the ice bin will  
freeze food in the refrigerator compartment.  
This could also cause the icemaker to stop  
producing ice.  
slightly slanting it to avoid contact with the  
icemaker.  
y If the Ice On/Off button on the display is  
set to OFF for an extended period of time,  
the ice compartment will gradually warm  
up to the temperature of the refrigerator  
compartment. To prevent ice cubes from  
melting and leaking from the dispenser,  
ALWAYS empty the ice bin when the  
icemaker is set to OFF for more than a few  
hours.  
Avoid touching the auto shutoff (feeler  
2
arm) when replacing the ice bin. See the  
label on the ice compartment door for  
details.  
Auto shutoff  
(feeler arm)  
Detaching the In-Door Ice Bin  
Gently pull the handle to open the ice  
1
compartment.  
CAUTION  
When handling the ice bin,  
keep hands away from the  
icemaker tray area to avoid  
personal injury.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 35  
Automatic Icemaker  
WARNING  
Personal Injury Hazard  
* Depending on the model, some of the  
following functions may not be available.  
DO NOT place fingers or hands on the  
automatic ice making mechanism while the  
refrigerator is plugged in.  
Ice is made in the automatic icemaker and sent  
to the dispenser. The icemaker will produce  
70-182 cubes in a 24-hour period, depending  
on freezer compartment temperature, room  
temperature, number of door openings and  
other operating conditions.  
Icemaker  
y It takes about 12 to 24 hours for a newly  
installed refrigerator to begin making ice. Wait  
72 hours for full ice production to occur.  
y Ice making stops when the in-door ice bin  
is full. When full, the in-door ice bin holds  
approximately 6 to 8 (12-16 oz) glasses of ice.  
y Foreign substances or frost on the auto shutoff  
(feeler arm) can interrupt ice production. Make  
sure the feeler arm is clean at all times for  
proper operation.  
Auto shutoff (feeler arm)  
y To increase ice production, use the Ice Plus  
function. The function increases both ice  
making and freezing capabilities.  
Turning the Automatic Icemaker  
On or Off  
To turn the automatic icemaker On/Off, press  
and hold the Ice On/Off button on the control  
panel for three seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 HOW TO USE  
When You Should Turn the  
Icemaker Off  
Automatic Icemaker  
(continued)  
y When the water supply will be shut off  
for several hours.  
CAUTION  
y When the ice bin is removed for more  
than one or two minutes.  
y The first ice and water dispensed may  
include particles or odor from the water  
supply line or the water tank.  
y When the refrigerator will not be used  
for several days.  
y Throw away the first few batches of ice.  
This is also necessary if the refrigerator has  
not been used for a long time.  
NOTE  
The ice bin should be emptied when the  
Ice On/Off button is turned to the OFF  
mode.  
y Never store beverage cans or other items in  
the ice bin for the purpose of rapid cooling.  
Doing so may damage the icemaker or the  
containers may burst.  
y If discolored ice is dispensed, check the  
water filter and water supply. If the problem  
continues, contact a qualified service  
center. Do not use the ice or water until the  
problem is corrected.  
Normal Sounds You May Hear  
y The icemaker water valve will buzz as  
the icemaker fills with water. If the  
power button has been turned on, the  
ice maker will buzz even if it has not yet  
been hooked up to water. To stop the  
buzzing, press the power button to turn  
it off.  
y Keep children away from the dispenser.  
Children may play with or damage the  
controls.  
y The ice passage may become blocked with  
frost if only crushed ice is used. Remove the  
frost that accumulates by removing the ice  
bin and clearing the passage with a rubber  
spatula. Dispensing cubed ice can also help  
prevent frost buildup.  
NOTE  
Keeping the power turned on to the  
icemaker before the water line is  
connected can damage the icemaker.  
y Never use thin crystal glass or crockery to  
collect ice. Such containers may chip or  
break resulting in glass fragments in the ice.  
y You will hear the sound of cubes  
dropping into the bin and water running  
in the pipes as the icemaker refills.  
y Dispense ice into a glass before filling it  
with water or other beverages. Splashing  
may occur if ice is dispensed into a glass  
that already contains liquid.  
Preparing For Vacation  
y Never use a glass that is exceptionally  
narrow or deep. Ice may jam in the ice  
passage and refrigerator performance may  
be affected.  
Set the icemaker power button to OFF and  
shut off the water supply to the refrigerator.  
NOTE  
y Keep the glass at a proper distance from  
the ice outlet. A glass held too close to the  
outlet may prevent ice from dispensing.  
The ice bin should be emptied any time  
the Ice On/Off button is turned off.  
y To avoid personal injury, keep hands out of  
the ice door and passage.  
If the ambient temperature will drop below  
freezing, have a qualified technician drain  
the water supply system to prevent serious  
property damage due to flooding caused by  
ruptured water lines or connections.  
y Never remove the dispenser cover.  
y If ice or water dispenses unexpectedly, turn  
off the water supply and contact a qualified  
service center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 37  
Ice and Water Dispenser  
Incorrect Way  
Correct Way  
* Depending on the model, some of the  
following functions may not be available.  
Water  
CAUTION  
Keep children away from the dispenser.  
Children may play with or damage the  
controls.  
Dispenser  
Ice  
Water switch  
Ice switch  
CAUTION  
Throw away the first few batches of ice  
(about 24 cubes). This is also necessary  
if the refrigerator has not been used for  
a long time.  
Stand  
Locking the Dispenser  
Using the Dispenser  
Press and hold the Alarm and Lock buttons  
simultaneously for three seconds to lock the  
dispenser and all the control panel functions.  
Follow the same instructions to unlock.  
y To dispense cold water, push on the  
water switch with a glass.  
y To dispense ice, push on the ice switch  
with a glass.  
Cleaning the Dispenser Stand  
NOTE  
y If discolored ice is dispensed, check  
the water filter and water supply. If the  
problem continues, contact a qualified  
service center. Do not use the ice or  
water until the problem is corrected.  
Grip the stand with both hands and pull it  
1
out.  
y The dispenser will not operate when  
either of the refrigerator doors are open.  
y If dispensing water or ice into a container  
with a small opening, place it as close to  
the dispenser as possible.  
y Some dripping may occur after  
dispensing. Hold the cup beneath the  
dispenser for a few seconds after  
dispensing to catch all of the drops.  
Wipe out dirty areas with a clean cloth.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
38 HOW TO USE  
Storing Food  
Food Preservation Location  
Each compartment inside the refrigerator is designed to store different types of food.  
Store your food in the optimal space to enjoy the freshest taste.  
Adjustable refrigerator shelf  
Adjustable shelves to meet  
your individual storage needs.  
Vegetable storage  
(Crisper)  
Preserves vegetables and  
fruit.  
Door-in-Door  
Store frequently used items  
like butter, margarine, cream  
cheese, peanut butter,  
Ice storage bin  
beverages, and condiments.  
If a large amount of ice is  
needed, transfer the ice in  
the in-door ice bin to the ice  
storage bin.  
Glide‘N’Serve  
Provides storage space with a  
variable temperature control that  
keeps the compartment at a different  
temperature than the refrigerator.  
It is a convenient place to store  
sandwiches or meat to be cooked.  
Durabase®  
Largest storage space in  
the freezer.  
CAUTION  
y Do not store food with high moisture content towards the top of the refrigerator. The moisture  
could come in direct contact with the cold air and freeze.  
y Wash food before storing it in the refrigerator. Vegetables and fruit should be washed, and food  
packaging should be wiped down to prevent adjacent foods from being contaminated.  
y If the refrigerator is kept in a hot and humid place, frequent opening of the door or storing a lot of  
vegetables in the refrigerator may cause condensation to form. Wipe off the condensation with a  
clean cloth or a paper towel.  
y If the refrigerator door or freezer drawer is opened or closed too often, warm air may penetrate the  
refrigerator and raise its temperature. It can also increase the running costs of the unit.  
y Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or  
personal injury if items are removed with excessive force.  
y Do not store glass bottles in the pantry. If they are frozen, they can break and cause personal injury.  
NOTE  
y If you are leaving home for a short period of time, like a short vacation, the refrigerator should  
be left on. Refrigerated foods that are able to be frozen will stay preserved longer if stored in the  
freezer.  
y If you are leaving the refrigerator turned off for an extended period of time, remove all food and  
unplug the power cord. Clean the interior, and leave the door open to prevent fungi from growing  
in the refrigerator.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 39  
Storing Frozen Food  
Food Storage Tips  
* The following tips may not be applicable  
depending on the model.  
NOTE  
Check a freezer guide or a reliable cookbook  
for further information about preparing food  
for freezing or food storage times.  
Wrap or store food in the refrigerator in airtight  
and moisture-proof material unless otherwise  
noted. This prevents food odor and taste transfer  
throughout the refrigerator. For dated products,  
check date code to ensure freshness.  
Freezing  
Your freezer will not quick-freeze a large  
quantity of food. Do not put more unfrozen  
food into the freezer than will freeze within  
24 hours (no more than 2 to 3 lbs. of food per  
cubic foot of freezer space). Leave enough  
space in the freezer for air to circulate around  
packages. Be careful to leave enough room at  
the front so the door can close tightly.  
Food  
How to  
Butter or  
Margarine  
Keep opened butter in a covered  
dish or closed compartment.  
When storing an extra supply,  
wrap in freezer packaging and  
freeze.  
Cheese  
Milk  
Store in the original wrapping  
until you are ready to use it.  
Once opened, rewrap tightly in  
plastic wrap or aluminum foil.  
Storage times will vary according to the quality  
and type of food, the type of packaging or wrap  
used (how airtight and moisture-proof) and  
the storage temperature. Ice crystals inside a  
sealed package are normal. This simply means  
that moisture in the food and air inside the  
package have condensed, creating ice crystals.  
Wipe milk cartons. For coldest  
milk, place containers on  
interior shelf.  
Eggs  
Fruit  
Store in original carton on  
interior shelf, not on door shelf.  
NOTE  
Allow hot foods to cool at room temperature  
for 30 minutes, then package and freeze.  
Cooling hot foods before freezing saves  
energy.  
Do not wash or hull the fruit  
until it is ready to be used. Sort  
and keep fruit in its original  
container, in a crisper, or store  
in a completely closed paper  
bag on a refrigerator shelf.  
Leafy  
Vegetables  
Remove store wrapping and  
trim or tear off bruised and  
discolored areas. Wash in cold  
water and drain. Place in plastic  
bag or plastic container and  
store in crisper.  
Vegetables Place in plastic bags or plastic  
with skins  
(carrots,  
peppers)  
container and store in crisper.  
Fish  
Store fresh fish and shellfish  
in the freezer section if they  
are not being consumed the  
same day of purchase. It is  
recommended to consume  
fresh fish and shellfish the  
same day purchased.  
Leftovers  
Cover leftovers with plastic wrap  
or aluminum foil, or store in  
plastic containers with tight lids.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 HOW TO USE  
Storing Frozen Food (continued)  
Glide‘N’Serve  
Packaging  
The Glide’N’Serve provides storage space  
with a variable temperature control that can  
keep the compartment at a slightly different  
temperature than the refrigerator section. This  
drawer can be used for large party trays, deli  
items and beverages. (This drawer should  
not be used for vegetables that require high  
humidity.)  
Successful freezing depends on correct  
packaging. When you close and seal the  
package, it must not allow air or moisture in or  
out. If it does, you could have food odor and  
taste transfer throughout the refrigerator and  
could also dry out frozen food.  
Press the Select button to choose between  
Produce (Cold), Deli (Colder) and Meat  
(Coldest).  
Packaging recommendations:  
y Rigid plastic containers with tight-fitting  
lids  
y Straight-sided canning/freezing jars  
y Heavy-duty aluminum foil  
y Plastic-coated paper  
Meat  
Deli  
Produce  
Select  
y Non-permeable plastic wraps  
y Specified freezer-grade self-sealing plastic  
bags  
Follow package or container instructions for  
proper freezing methods.  
Do not use  
y Bread wrappers  
y Non-polyethylene plastic containers  
y Containers without tight lids  
y Wax paper or wax-coated freezer wrap  
y Thin, semi-permeable wrap  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 41  
Humidity Controlled Crisper  
and Glide’N’Serve  
Glide‘N’Access™  
(on some models)  
(on some models)  
The Glide’N’Access™ slides out for easy loading  
of large items, like sheet cakes or deli trays, and  
to give you easy access to items stored at the  
back of the shelf.  
To slide out, grasp the handle at the front of the  
shelf and gently pull forward. Push back to slide  
in.  
Humidity Controlled Crisper  
Depending on the model, some of the  
following functions may not be available.  
The crispers provide fresher tasting fruit  
and vegetables by letting you easily control  
humidity inside the drawer.  
CAUTION  
Take care when sliding the  
Glide'N'Access™ in and out, as taller  
items may fall, causing damage or injury.  
Control the amount of humidity in the  
moisture-sealed crispers by adjusting the  
control to any setting between Vegetable and  
Fruit.  
y Vegetable keeps moist air in the  
crisper for best storage of fresh, leafy  
vegetables.  
y Fruit lets moist air out of the crisper for  
best storage of fruit.  
Fruit  
Vegetable  
Vegetable  
Fruit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 HOW TO USE  
To Remove Glide‘N’Access™  
(on some models)  
Detaching and Assembling the  
Storage Bins  
To remove the Glide‘N’Access™, pull out the  
shelf to full extension, lift the front up and pull  
straight out.  
Glide‘N’Serve and Crisper  
To remove the Crisper and the Glide’N’Serve,  
pull out the Crisper or Glide’N’Serve to  
full extension, lift the front up, and pull straight  
out.  
To Remove the Glass  
(on some models)  
(Pantry drawer not shown for clarity)  
Lift up the glass under the crisper cover, and  
pull up and out.  
To install, slightly tilt up the front, insert the  
drawer into the frame and push it back into  
place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 43  
Door Bins  
InstaView Door-in-Door  
The InstaView Door-in-Door compartment  
allows for easy access to commonly used food  
items.  
The door bins are removable for easy cleaning  
and adjustment.  
To remove the bin, simply lift the bin up and  
pull straight out.  
1
To replace the bin, slide it in above the  
desired support and push down until it snaps  
into place.  
2
NOTE  
InstaView Door-in-Door  
Compartment  
Some bins may vary in appearance and  
will only fit in one location.  
To access the InstaView Door-in-Door  
compartment, lightly press the button on the right  
refrigerator door handle to open the door.  
CAUTION  
y Do not apply excessive force while  
detaching or assembling the storage  
bins.  
y Do not use the dishwasher to clean  
the storage bins and shelves.  
y Regularly detach and wash the  
storage bins and shelves; they can  
become easily contaminated by the  
food.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44 HOW TO USE  
InstaView Function  
Door-in-Door Case  
The InstaView function on the Door-in-Door lets  
you see if you’re running low on frequently used  
items like beverages and snacks, without opening  
the refrigerator door.  
To open the Door-in-Door case, slightly push  
the marked area to pop it open. The Door-in-  
Door Case is removable for easy cleaning and  
adjustment.  
Knock twice on the glass to turn the LED  
1
To remove the Door-in-Door case, lift up  
and pull out.  
1
light inside the Door-in-Door on or off.  
The LED light turns off automatically after  
2
ten seconds.  
y The InstaView Door-in-Door function is  
disabled when the right refrigerator door  
is open, for two seconds after closing the  
door, and when the ice dispenser is in use.  
y Knock near the center of the glass.  
Knocking near the edges of the glass may  
not activate the InstaView Door-in-Door  
function properly.  
y Knock hard enough that the knocking  
sound is audible.  
y The InstaView Door-in-Door function may  
activate if a loud noise occurs near the  
refrigerator.  
To replace the Door-in-Door case, line the  
2
tabs on the Door-in-Door case with the  
slots on the door and push down until it  
snaps into place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE 45  
Door-in-Door Lower Shelf  
The Door-in-Door lower shelf is removable for  
easy cleaning.  
To remove the lower shelf, lift the shelf  
retainer up and out.  
1
Remove the two screws from the shelf  
and pull it straight out.  
2
Reverse the procedure to replace the  
shelf.  
3
3
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
46 HOW TO USE  
Using the Folding Shelf  
Adjusting the Refrigerator  
Shelves  
You can store taller items, such as a gallon  
container or bottles, by simply pushing the  
front half of the shelf underneath the back half  
of the shelf. Pull the front of the shelf toward  
you to return to a full shelf.  
The shelves in your refrigerator are adjustable  
to meet your individual storage needs. Your  
model may have glass or wire shelves.  
Adjusting the shelves to fit items of different  
heights will make finding the exact item you  
want easier. Doing so will also reduce the  
amount of time the refrigerator door is open  
which will save energy.  
Detaching the Shelf  
Tilt up the front of the shelf and lift it straight  
up. Pull the shelf out.  
CAUTION  
y Do not clean glass shelves with  
warm water while they are cold.  
Shelves may break if exposed to  
sudden temperature changes or  
impact.  
y Glass shelves are heavy. Use special  
care when removing them.  
Assembling the Shelf  
Tilt the front of the shelf up and guide the shelf  
hooks into the slots at a desired height. Then,  
lower the front of the shelf so that the hooks  
drop into the slots.  
CAUTION  
Make sure that shelves are level from  
one side to the other. Failure to do so  
may result in the shelf falling or food  
spilling.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE 47  
MAINTENANCE  
Cleaning  
y Both the refrigerator and freezer sections defrost automatically; however, clean both  
sections about once a month to prevent odors.  
y Wipe up spills immediately.  
y Always unplug the refrigerator before cleaning.  
General Cleaning Tips  
Inside Walls  
(allow freezer to warm up so the  
cloth will not stick)  
y Unplug refrigerator or disconnect power.  
y Remove all removable parts, such as  
shelves, crispers, etc.  
To help remove odors, you can wash the inside  
of the refrigerator with a mixture of baking  
soda and warm water. Mix 2 tablespoons of  
baking soda to 1 quart of water (26 g soda  
to 1 liter water). Be sure the baking soda is  
completely dissolved so it does not scratch the  
surfaces of the refrigerator.  
y Use a clean sponge or soft cloth and a  
mild detergent in warm water. Do not  
use abrasive or harsh cleaners.  
y Hand wash, rinse and dry all surfaces  
thoroughly.  
Exterior  
Door Liners and Gaskets  
Use a clean sponge or soft cloth and a mild  
detergent in warm water. Do not use cleaning  
waxes, concentrated detergents, bleaches,  
or cleaners containing petroleum on plastic  
refrigerator parts.  
Waxing external painted metal surfaces helps  
provide rust protection. Do not wax plastic  
parts. Wax painted metal surfaces at least  
twice a year using appliance wax (or auto paste  
wax). Apply wax with a clean, soft cloth.  
For products with a stainless steel exterior,  
use a clean sponge or soft cloth and a mild  
detergent in warm water. Do not use abrasive  
or harsh cleaners. Dry thoroughly with a soft  
cloth.  
Plastic Parts (covers and panels)  
Use a clean sponge or soft cloth and a mild  
detergent in warm water. Do not use glass  
cleaners, abrasive cleansers, or flammable  
fluids. These can scratch or damage the  
material.  
CAUTION  
y Do not use a rough cloth or sponge  
when cleaning the interior and exterior  
of the refrigerator.  
y Do not place your hand on the bottom  
surface of the refrigerator when  
opening and closing.  
Condenser Coils  
Use a vacuum cleaner with an attachment to  
clean the condenser cover and vents. Do not  
remove the panel covering the condenser coil  
area.  
WARNING  
Use non-flammable cleaner. Failure to do  
so can result in fire, explosion, or death.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48 MAINTENANCE  
Replacing the Fresh Air Filter  
Replacing the Water Filter  
It is recommended that you replace the water  
filter:  
It is recommended that you replace the air filter:  
y Approximately every six months.  
y Approximately every six months.  
y When the water filter indicator turns on.  
y When the CHANGE FILTER light turns on.  
y When the water dispenser output  
decreases.  
y When the ice cubes are smaller than normal.  
1
Remove the Old Filter  
Turn the filter cover to the left to detach  
it from the refrigerator wall. The filter is  
located on the inside of the filter cover.  
Remove the filter from the cover and  
replace it with a new filter.  
Before Replacing the Water Filter:  
If the top shelf, located below the water filter,  
is in the highest position, it will need to be  
removed prior to replacing the water filter.  
To remove any shelf—Tilt up the front of the  
shelf and lift it . Pull the shelf out.  
Install a New Air Filter.  
2
Place the new filter inside of the cover  
with the side that says “Front” facing  
outward. Turn the filter cover to the right  
to attach it to the refrigerator wall.  
After changing the filter, push and hold the  
Air Filter button for three seconds to reset  
the filter sensor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE 49  
• Rotate the water filter up into position and  
close the cover. The cover will click when  
closed correctly.  
Remove the old water filter.  
1
Lower or remove  
the top left shelf to  
allow the water filter  
to rotate all the way  
down.  
Press the push button  
to open the water  
filter cover.  
After the water filter is replaced,  
3
NOTE  
dispense 2.5 gallons of water (flush for  
approximately 5 minutes) to remove  
trapped air and contaminants from the  
system. Do not dispense the entire 2.5  
gallon amount continuously. Depress and  
release the dispenser pad for cycles of 30  
seconds ON and 60 seconds OFF.  
y Replacing the water filter causes a small  
amount of water (around 1 oz. or 25 cc)  
to drain. Place a cup under the front  
end of the water filter cover to collect  
any leaking water. Hold the water filter  
upright, once it is removed, to prevent  
any remaining water from spilling out of  
the water filter.  
NOTE  
• Make sure to rotate the filter down  
completely before pulling it out of the  
manifold hole.  
Keep the water filter bypass plug. You  
must use the water filter bypass plug  
when a replacement water filter cartridge  
is not available.  
• Pull the water  
filter downward  
and turn it  
counter-  
clockwise.  
CAUTION  
DO NOT operate refrigerator without  
water filter or water filter plug installed.  
Replace with a new water filter.  
2
• Take the new water  
filter out of its  
NOTE  
packing and remove  
the protective cover  
from the o-rings.  
y To purchase a replacement water filter:  
Visit your local dealer or distributor  
Web: Find Parts & Accessories from  
Support section of lg.com  
Call : 1-800-243-0000 (USA)  
1-888-542-2623 (Canada)  
• With the water filter  
tabs in the horizontal  
position, push the  
new water filter into the  
manifold hole and turn it  
clockwise.  
y Part number of the replacement water  
filter: MDJ64844601(LT1000P)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50 MAINTENANCE  
Performance Data Sheet  
Use Replacement Cartridge: MDJ64844601(LT1000P)  
The concentration of the indicated substances in water entering the system was reduced to a  
concentration less than or equal to the permissible limit for water leaving the system as specified in  
NSF/ANSI Standard 42 and Standard 53 and Standard 401.  
System tested and certified by NSF International against NSF/ANSI Standard 42,  
Standard 53 and Standard 401. For the reduction of substances listed below.  
Max  
Average  
Influent  
Challenge  
NSF specified  
Challenge  
Concentration  
Average  
Product Water  
Concentration  
Avg %  
Reduction  
Permissible  
Product Water  
Concentration  
NSF Reduction  
Requirement  
Contaminant Reduction  
Chlorine Taste and Odor  
2.0 µg/L  
2.0 µg/L± 10%  
>97.5%  
99.80%  
0.050 µg/L  
N/A  
N/A  
50.00%  
Nominal Particulate Class I,  
0.5 to < 1.0 µm  
12,000,000  
pts/mL  
At least 10,000  
particles/mL  
24,000 pts/ml  
85.00%  
107 to 108 MFL;  
fibers greater than  
10 µg/Lin length  
Asbestos  
180 MFL  
>99.00%  
< 1 MFL  
N/A  
99.00%  
Atrazine  
Benzene  
Carbofuran  
Lindane  
8.5 µg/L  
15.0 µg/L  
74.0 µg/L  
1.9 µg/L  
9.0 µg/L ± 10%  
15.0 µg/L± 10%  
80.0 µg/L± 10%  
2.0 µg/L± 10%  
>94.10%  
>96.60%  
98.30%  
0.500 µg/L  
0.510 µg/L  
1.258 µg/L  
0.019 µg/L  
3.0 µg/L  
5.0 µg/L  
40 µg/L  
0.2 µg/L  
NA  
NA  
NA  
NA  
>99.00%  
P-Dichlorobenzene  
230.0 µg/L  
225.0 µg/L± 10%  
>99.80%  
0.460 µg/L  
75.0 µg/L  
NA  
2,4-D  
210.0 µg/L  
140.0 µg/L  
150.0 µg/L  
5.9 µg/L  
210.0 µg/L± 10%  
150.0 µg/L± 10%  
150.0 µg/L± 10%  
6.0 µg/L± 10%  
>99.90%  
99.60%  
>90%  
0.210 µg/L  
0.560 µg/L  
<0.500 µg/L  
0.531 µg/L  
<0.420 µg/L  
70.0 µg/L  
10.0 µg/L  
10.0 µg/L  
2.0 µg/L  
2.0 µg/L  
NA  
NA  
NA  
NA  
NA  
Lead @ pH 6.5  
Lead @ pH 8.5  
Mercury @ pH 6.5  
Mercury @ pH 8.5  
91.00%  
92.50%  
5.6 µg/L  
6.0 µg/L± 10%  
100,000  
cysts/L  
Minimum 50,000  
cysts/L  
Cyst*  
>99.99%  
10  
N/A  
99.95%  
Atenolol  
240 ng/L  
1600 ng/L  
1600 ng/L  
170 ng/L  
160 ng/L  
200 ng/L  
400 ng/L  
140 ng/L  
120 ng/L  
2000 ng/L  
1600 ng/L  
200 ± 40% ng/L  
1400 ± 40% ng/L  
1400 ± 40% ng/L  
140 ± 40% ng/L  
140 ± 40% ng/L  
200 ± 40% ng/L  
400 ± 40% ng/L  
140 ± 40% ng/L  
140 ± 40% ng/L  
2000 ± 40% ng/L  
1400 ± 40% ng/L  
> 95.50%  
98.40%  
10.80 ng/L  
25.60 ng/L  
46.40 ng/L  
5.44 ng/L  
5.44 ng/L  
10.40 ng/L  
22.00 ng/L  
5.46 ng/L  
4.68 ng/L  
22.00 ng/L  
46.40 ng/L  
30 ng/L  
200 ng/L  
200 ng/L  
20 ng/L  
20 ng/L  
30 ng/L  
60 ng/L  
20 ng/L  
20 ng/L  
300 ng/L  
200 ng/L  
NA  
NA  
NA  
NA  
NA  
NA  
NA  
NA  
NA  
NA  
NA  
Carbamazepine  
DEET  
97.10%  
Trimethoprim  
Linuron  
>96.80%  
>96.60%  
>94.80%  
>94.50%  
>96.10%  
>96.10%  
>98.90%  
>97.10%  
Phenytoin  
Ibuprofen  
Naproxen  
Estrone  
Bisphenol A  
Nonyl Phenol  
* Based on the use of Cryptosporidium parvum oocysts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE 51  
Application Guidelines / Water  
Supply Parameters  
CAUTION  
Please note that water could fall while  
replacing filter which could result property  
damage.  
Note that while testing was performed  
under standard laboratory conditions, actual  
performance may vary.  
To reduce the risk associated with property  
damage due to water leakage:  
y Read and follow Use Instructions before  
installation and use of this system.  
Service Flow  
Water Supply  
0.5 gpm (1.9 lpm)  
y Installation must comply with existing state  
or local plumbing codes.  
Community or private well  
— Potable Water  
y Protect filter from freezing. Drain filter  
when room temperature drops below 33°F  
(0.6°C).  
Water Pressure  
20 -120 psi (138 - 827 kPa)  
Water Temperature 33-100°F (0.6 -37.8°C)  
Capacity 200 gallons (757 liters)  
y Do not install if water pressure exceeds  
120 psi (827 kPa). If your water pressure  
exceeds 80 psi, you must install a  
pressure limiting valve. Contact a plumbing  
professional if you are uncertain how to  
check your water pressure.  
NSF System Trade Name Code :  
MDJ64844601(LT1000P)  
y Do not install where water hammer  
conditions may occur. If water hammer  
conditions exist you must install a water  
hammer arrester. Contact a plumbing  
professional if you are uncertain how to  
check for this condition.  
It is essential that the manufacturer’s  
recommended installation, maintenance and  
filter replacement requirements be carried out  
for the product to perform as advertised.  
Replacement Cartridge:  
MDJ64844601(LT1000P)  
y Do not install on hot water supply lines.  
Install on cold water lines only. The  
maximum operating water temperature of  
this filter system is 100°F (37.8°C).  
For estimated costs of replacement elements  
please call 1-877-714-7486 or visit our website  
y Where a backflow prevention device is  
installed on a water system, a device  
for controlling pressure due to thermal  
expansion must be installed.  
Refer to the Warranty section of this manual  
for information on the limited warranty.  
y The disposable filter cartridge must be  
replaced every six months, at the rated  
capacity or if a noticeable reduction in flow  
rate occurs.  
SAFETY INFORMATION  
NSF is a trademark of NSF International. LG is  
a trademark of LG Corp.  
Read, understand, and follow all safety  
Information contained in these instructions  
prior to installation and use of this product.  
Retain these instructions for future reference.  
WARNING  
To reduce the risk associated with the  
ingestion of contaminants:  
y Do not use with water that is  
microbiologically unsafe or of unknown  
quality without adequate disinfection before  
or after the system. Systems certified for  
cyst reduction may be used on disinfected  
water that may contain filterable cysts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52 SMART DIAGNOSIS  
SMART DIAGNOSIS™  
Should you experience any problems with  
your refrigerator, it has the capability of  
Hold the mouthpiece of your phone in  
front of the speaker  
that is located on  
3
transmitting data via your telephone to the LG  
service center. This gives you the capability of  
speaking directly to our trained specialists. The  
specialist records the data transmitted from  
your machine and uses it to analyze the issue,  
providing a fast and effective diagnosis.  
the right hinge of  
the refrigerator door,  
when instructed to  
do so by the call  
center.  
If you experience problems with your  
Press and hold the Freezer button for three  
seconds while  
continuing  
to hold your  
phone to the  
speaker.  
4
refrigerator, call 1-800-243-0000. Only use the  
Smart Diagnosis™ feature when instructed  
to do so by the LG call center agent. The  
transmission sounds that you will hear are  
normal and sound similar to a fax machine.  
Smart Diagnosis™ cannot be activated unless  
your refrigerator is connected to power. If  
your refrigerator is unable to turn on, then  
troubleshooting must be done without using  
Smart Diagnosis™.  
After you hear three beeps, release the  
Freezer button.  
5
6
Keep the phone in place until the tone  
transmission has finished. The display will  
count down the time. Once the countdown  
is over and the tones have stopped,  
resume your conversation with the  
specialist, who will then be able to assist  
you in using the information transmitted  
for analysis.  
Using Smart Diagnosis™  
First, call 1-800-243-0000. Only use the Smart  
Diagnosis™ feature when instructed to do so  
by the LG call center agent.  
Lock the display. To lock the display,  
press and hold the Lock button for three  
seconds. (If the display has been locked  
for over five minutes, you must deactivate  
the lock and then reactivate it.)  
1
NOTE  
y For best results, do not move the phone  
while the tones are being transmitted.  
y If the call center agent is not able to get  
an accurate recording of the data, you  
may be asked to try again.  
NOTE  
y Call quality differences by region may  
affect the function.  
Open the right refrigerator door.  
2
y Use the home telephone for better  
communication performance, resulting  
in better service.  
y Bad call quality may result in poor data  
transmission from your phone to the  
machine, which could cause Smart  
Diagnosis™ to malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING 53  
TROUBLESHOOTING  
Review the Troubleshooting section before calling for service; doing so will save you both time  
and money.  
Problem  
Possible Causes  
Solutions  
Refrigerator and The refrigerator control is set to Turn the control ON. Refer to the Setting the  
Freezer section  
are not cooling.  
OFF (some models).  
Controls section for proper temperature settings.  
Refrigerator is in the defrost  
cycle.  
During the defrost cycle, the temperature of  
each compartment may rise slightly. Wait 30  
minutes and confirm the proper temperature  
has been restored once the defrost cycle has  
completed.  
Refrigerator was recently  
installed.  
It may take up to 24 hours for each compartment  
to reach the desired temperature.  
Refrigerator was recently  
relocated.  
If the refrigerator was stored for a long period of  
time or moved on its side, it is necessary for the  
refrigerator to stand upright for 24 hours before  
connecting it to power.  
Cooling System  
runs too much.  
Refrigerator is replacing an  
older model.  
Modern refrigerators require more operating  
time but use less energy due to more efficient  
technology.  
Refrigerator was recently  
plugged in or power restored.  
The refrigerator will take up to 24 hours to cool  
completely.  
Door opened often or a large  
Adding food and opening the door warms the  
amount of food / hot food was refrigerator, requiring the compressor to run  
added.  
longer in order to cool the refrigerator back  
down. In order to conserve energy, try to get  
everything you need out of the refrigerator  
at once, keep food organized so it is easy to  
find, and close the door as soon as the food is  
removed. (Refer to the Food Storage Guide.)  
Doors are not closed  
completely.  
Firmly push the doors shut. If they will not  
shut all the way, see the Doors will not  
close completely or pop open section in  
Troubleshooting.  
Refrigerator is installed in a hot The compressor will run longer under warm  
location.  
conditions. At normal room temperatures (70°F)  
expect your compressor to run about 40% to  
80% of the time. Under warmer conditions,  
expect it to run even more often. The refrigerator  
should not be operated above 110°F.  
Condenser / back cover is  
clogged.  
Use a vacuum cleaner with an attachment to  
clean the condenser cover and vents. Do not  
remove the panel covering the condenser coil  
area.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54 TROUBLESHOOTING  
Problem  
Possible Causes  
Refrigerator was recently  
Solutions  
Refrigerator or  
Freezer section is installed.  
too warm.  
It may take up to 24 hours for each compartment  
to reach the desired temperature.  
Air vents are blocked.  
Rearrange items to allow air to flow throughout  
the compartment. Refer to the Airflow diagram in  
the Using Your Refrigerator section.  
Doors are opened often or for  
long periods of time.  
When the doors are opened often or for long  
periods of time, warm, humid air enters the  
compartment. This raises the temperature and  
moisture level within the compartment. To lessen  
the effect, reduce the frequency and duration of  
door openings.  
Unit is installed in a hot location. The refrigerator should not be operated in  
temperatures above 110F.  
A large amount of food or  
hot food was added to either  
compartment.  
Adding food warms the compartment requiring  
the cooling system to run. Allowing hot food to  
cool to room temperature before putting it in the  
refrigerator will reduce this effect.  
Doors not closed correctly.  
See the Doors will not close correctly or pop  
open section in Troubleshooting.  
Temperature control is not set If the temperature is too warm, adjust the  
correctly.  
control one increment at a time and wait for the  
temperature to stabilize. Refer to the Setting the  
Controls section for more information.  
Defrost cycle has recently  
completed.  
During the defrost cycle, the temperature of each  
compartment may rise slightly and condensation  
may form on the back wall. Wait 30 minutes  
and confirm the proper temperature has been  
restored once the defrost cycle has completed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING 55  
Problem  
Possible Causes  
Solutions  
Interior moisture Doors are opened often or for  
When the doors are opened often or for long  
periods of time, warm, humid air enters the  
compartment. This raises the temperature and  
moisture level within the compartment. To  
lessen the effect, reduce the frequency and  
duration of door openings.  
buildup.  
long periods of time.  
Doors not closed correctly.  
Weather is humid.  
See the Doors will not close correctly section in  
the Troubleshooting section.  
Humid weather allows additional moisture  
to enter the compartments when the doors  
are opened leading to condensation or frost.  
Maintaining a reasonable level of humidity in the  
home will help to control the amount of moisture  
that can enter the compartments.  
Defrost cycle recently  
completed.  
During the defrost cycle, the temperature of each  
compartment may rise slightly and condensation  
may form on the back wall. Wait 30 minutes and  
confirm that the proper temperature has been  
restored once the defrost cycle has completed.  
Food is not packaged correctly. Food stored uncovered or unwrapped, and damp  
containers can lead to moisture accumulation  
within each compartment. Wipe all containers  
dry and store food in sealed packaging to prevent  
condensation and frost.  
Food is freezing  
in the refrigerator was placed near an air vent.  
compartment.  
Food with high water content  
Rearrange items with high water content away  
from air vents.  
Refrigerator temperature control If the temperature is too cold, adjust the control  
is set incorrectly.  
one increment at a time and wait for the  
temperature to stabilize. Refer to the Setting the  
Controls section for more information.  
Refrigerator is installed in a cold When the refrigerator is operated in temperature  
location.  
below 41°F (5°C), food can freeze in the  
refrigerator compartment. The refrigerator should  
not be operated in temperature below 55°F (13°C).  
Frost or ice  
crystals form  
on frozen food  
(outside of  
Door is opened frequently or for When the doors are opened often or for long  
long periods of time.  
periods of time, warm, humid air enters the  
compartment. This raises the temperature and  
moisture level within the compartment. Increased  
moisture will lead to frost and condensation.  
To lessen the effect, reduce the frequency and  
duration of door openings.  
package).  
Door is not closing properly.  
Incorrect temperature control  
Freezer section is settings.  
too cold.  
Refer to the Doors will not close correctly or pop  
open section in the Troubleshooting section.  
Refrigerator or  
If the temperature is too cold, adjust the control  
one increment at a time and wait for the  
temperature to stabilize. Refer to the Setting the  
Controls section for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56 TROUBLESHOOTING  
Problem  
Possible Causes  
Solutions  
Frost or ice  
Condensation from food with a This is normal for food items with a high water  
crystals on frozen high water content has frozen  
content.  
food (inside of  
inside of the food package.  
sealed package).  
Food has been left in the freezer Do not store food items with high water content  
for a long period of time.  
in the freezer for a long period of time.  
Icemaker is not  
making enough  
ice.  
Demand exceeds ice storage  
capacity.  
The icemaker will produce approximately 70-182  
cubes in a 24 hour period.  
House water supply is not  
connected, valve is not turned  
on fully, or valve is clogged.  
Connect the refrigerator to a cold water supply  
with adequate pressure and turn the water  
shutoff valve fully open.  
If the problem persists, it may be necessary to  
contact a plumber.  
Water filter has been  
exhausted.  
It is recommended that you replace the water  
filter:  
Approximately every six months.  
When the water filter indicator turns on.  
When the water dispenser output decreases.  
When the ice cubes are smaller than normal.  
Low house water supply  
pressure.  
The water pressure must be between 20 and 120  
psi on models without a water filter and between  
40 and 120 psi on models with a water filter.  
If the problem persists, it may be necessary to  
contact a plumber or install a booster pump to  
compensate for the low pressure.  
Reverse Osmosis filtration  
system is used.  
Reverse osmosis filtration systems can reduce  
the water pressure below the minimum amount  
and result in icemaker issues.  
(Refer to Water Pressure section.)  
Tubing connecting refrigerator  
The tubing can kink when the refrigerator is  
to house supply valve is kinked. moved during installation or cleaning resulting  
in reduced water flow. Straighten or repair the  
water supply line and arrange it to prevent future  
kinks.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING 57  
Problem  
Possible Causes  
Solutions  
Icemaker is not  
making enough  
ice (continued).  
Doors are opened often or for  
long periods of time.  
If the doors of the unit are opened often, ambient  
air will warm the refrigerator which will prevent  
the unit from maintaining the set temperature.  
Lowering the refrigerator temperature can help,  
as well as not opening the doors as frequently.  
Doors are not closed  
completely.  
If the doors are not properly closed, ice  
production will be affected. See the Doors will  
not close completely or pop open section in  
Troubleshooting for more information.  
The temperature setting for the The recommended temperature for the freezer  
freezer is too warm.  
compartment for normal ice production is 0°F. If  
the freezer temperature is warmer, ice production  
will be affected.  
Dispensing water Water filter has been exhausted. It is recommended that you replace the water  
slowly. filter:  
Approximately every six months.  
When the water filter indicator turns on.  
When the water dispenser output decreases.  
When the ice cubes are smaller than normal.  
Reverse osmosis filtration  
system is used.  
Reverse osmosis filtration systems can reduce  
the water pressure below the minimum amount  
and result in icemaker issues.  
If the problem persists, it may be necessary to  
contact a plumber or install a booster pump to  
compensate for the low pressure.  
Low house water supply  
pressure.  
The water pressure must be between 20 and 120  
psi on models without a water filter and between  
40 and 120 psi on models with a water filter.  
If the problem persists, it may be necessary to  
contact a plumber or install a booster pump to  
compensate for the low pressure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58 TROUBLESHOOTING  
Problem  
Possible Causes  
Solutions  
Not dispensing  
ice.  
Doors are not closed  
completely.  
Ice will not dispense if any of the refrigerator  
doors are left open.  
Infrequent use of the dispenser. Infrequent use of the ice dispenser will cause  
the cubes to stick together over time, which  
will prevent them from properly dispensing.  
Check the ice bin for ice cubes clumping/sticking  
together. If they are, break up the ice cubes to  
allow for proper operation.  
The delivery chute is clogged  
with frost or ice fragments.  
Eliminate the frost or ice fragments by removing  
the ice bin and clearing the chute with a plastic  
utensil. Dispensing cubed ice can also help  
prevent frost or ice fragment buildup.  
The dispenser display is locked. Press and hold the Lock button for three seconds  
to unlock the control panel and dispenser.  
Ice bin is empty.  
It may take up to 24 hours for each compartment  
to reach the desired temperature and for the  
icemaker to begin making ice. Make sure that the  
shutoff (arm/sensor) is not obstructed.  
Once the ice supply in the bin has been  
completely exhausted, it my take up to 90  
minutes before additional ice is available, and  
approximately 24 hours to completely refill the  
bin.  
Icemaker is not  
making ice.  
Refrigerator was recently  
installed or icemaker recently  
connected.  
It may take up to 24 hours for each compartment  
to reach the desired temperature and for the  
icemaker to begin making ice.  
Icemaker not turned on.  
Locate the Ice On/Off button and confirm that it is  
turned on.  
The refrigerator is not connected Connect refrigerator to the water supply and turn  
to a water supply or the supply the water shutoff valve fully open.  
shutoff valve is not turned on.  
Icemaker shutoff (feeler arm)  
obstructed.  
If your icemaker is equipped with an ice shutoff  
arm, make sure that the arm moves freely.  
If your icemaker is equipped with the electronic  
ice shutoff sensor, make sure that there is a clear  
path between the two sensors.  
Reverse osmosis water filtration Reverse osmosis filtration systems can reduce  
system is connected to your  
cold water supply.  
the water pressure below the minimum amount  
and result in icemaker issues.  
(Refer to the Water Pressure section.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING 59  
Problem  
Possible Causes  
Solutions  
Not dispensing  
water.  
New installation or water line  
recently connected.  
Dispense 2.5 gallons of water (flush for  
approximately 5 minutes) to remove trapped air  
and contaminants from the system.  
Do not dispense the entire 2.5 gallon amount  
continuously. Depress and release the dispenser  
pad for cycles of 30 seconds ON and 60 seconds  
OFF.  
The dispenser panel is locked.  
Press and hold the Lock button for three seconds  
to unlock the control panel and dispenser.  
The dispenser is not set for  
water dispensing.  
The dispenser can be set for ice or water. Make  
certain that the control panel is set for the proper  
operation. Press the Water button on the control  
panel to dispense water.  
Refrigerator or freezer doors are Water will not dispense if any of the refrigerator  
not closed properly.  
doors are left open.  
Water filter has been recently  
removed or replaced.  
After the water filter is replaced, dispense 2.5  
gallons of water (flush for approximately 5  
minutes) to remove trapped air and contaminants  
from the system. Do not dispense the entire 2.5  
gallon amount continuously. Depress and release  
the dispenser pad for cycles of 30 seconds ON  
and 60 seconds OFF.  
Tubing connecting refrigerator  
The tubing can kink when the refrigerator is  
to house supply valve is kinked. moved during installation or cleaning resulting in  
reduced water flow. Straighten or repair the water  
supply line and arrange it to prevent future kinks.  
The house water supply is not  
connected, the valve is not  
turned on fully, or the valve is  
clogged.  
Connect refrigerator to the water supply and turn  
the water shutoff valve fully open.  
If the problem persists, it may be necessary to  
contact a plumber.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60 TROUBLESHOOTING  
Problem  
Possible Causes  
Solutions  
Ice has bad taste Water supply contains minerals A water filter may need to be installed to  
or odor.  
such as sulfur.  
eliminate taste and odor problems.  
NOTE: In some cases, a filter may not help. It  
may not be possible to remove all minerals / odor  
/ taste in all water supplies.  
Icemaker was recently installed. Discard the first few batches of ice to avoid  
discolored or bad tasting ice.  
Ice has been stored for too  
long.  
Ice that has been stored for too long will shrink,  
become cloudy, and may develop a stale taste.  
Throw away old ice and make a new supply.  
The food has not been stored  
Rewrap the food. Odors may migrate to the ice if  
properly in either compartment. food is not wrapped properly.  
The interior of the refrigerator  
needs to be cleaned.  
See the Care and Cleaning section for more  
information.  
The ice storage bin needs to be Empty and wash the bin (discard old cubes).  
cleaned.  
Make sure that the bin is completely dry before  
reinstalling it.  
Dispensing warm Refrigerator was recently  
Allow 24 hours after installation for the water  
storage tank to cool completely.  
water.  
installed.  
The water dispenser has been  
used recently and the storage  
tank was exhausted.  
Depending on your specific model, the water  
storage capacity will range from approximately 20  
to 30 oz.  
Dispenser has not been used  
for several hours.  
If the dispenser has not been used for several  
hours, the first glass dispensed may be warm.  
Discard the first 10 oz.  
Refrigerator is connected to the Make sure that the refrigerator is connected to a  
hot water supply. cold water pipe.  
WARNING: Connecting the refrigerator to a  
hot water line may damage the icemaker.  
Water supply contains minerals A water filter may need to be installed to  
such as sulfur. eliminate taste and odor problems.  
Water has bad  
taste or odor.  
Water filter has been exhausted. It is recommended that you replace the water  
filter:  
Approximately every 6 months.  
When the water filter indicator turns on.  
When the water dispenser output decreases.  
When the ice cubes are smaller than normal.  
Refrigerator was recently  
installed.  
Dispense 2.5 gallons of water (flush for  
approximately 5 minutes) to remove trapped  
air and contaminants from the system. Do  
not dispense the entire 2.5 gallon amount  
continuously. Depress and release the dispenser  
pad for cycles of 30 seconds ON and 60 seconds  
OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING 61  
Problem  
Possible Causes  
Solutions  
Icemaker is  
making too much obstructed.  
ice.  
Icemaker shutoff (feeler arm)  
Empty the ice bin. If your icemaker is equipped  
with an ice shutoff arm, maker sure that the arm  
moves freely. Reinstall the ice bin and wait 24  
hours to confirm proper operation.  
Clicking  
Rattling  
The defrost control will click  
when the automatic defrost  
cycle begins and ends.  
The thermostat control (or  
refrigerator control on some  
models) will also click when  
cycling on and off.  
Normal Operation  
Rattling noises may come from Normal Operation  
the flow of refrigerant, the  
water line on the back of the  
unit, or items stored on top of  
or around the refrigerator.  
Refrigerator is not resting solidly Floor is weak or uneven or leveling legs need to  
on the floor.  
be adjusted. See the Door Alignment section.  
Refrigerator with linear  
compressor was jarred while  
running.  
Normal Operation  
Whooshing  
Evaporator fan motor is  
circulating air through the  
refrigerator and freezer  
compartments.  
Normal Operation  
Normal Operation  
Air is being forced over the  
condenser by the condenser  
fan.  
Gurgling  
Popping  
Refrigerant flowing through the Normal Operation  
cooling system.  
Contraction and expansion of  
the inside walls due to changes  
in temperature.  
Normal Operation  
Sizzling  
Water dripping on the defrost  
heater during a defrost cycle.  
Normal Operation  
Vibrating  
If the side or back of the  
To eliminate the noise, make sure that the sides  
refrigerator is touching a cabinet and back cannot vibrate against any wall or  
or wall, some of the normal  
vibrations may make an audible  
sound.  
cabinet.  
Dripping  
Water running into the drain pan Normal Operation  
during the defrost cycle.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62 TROUBLESHOOTING  
Problem  
Possible Causes  
Solutions  
Pulsating or  
High-Pitched  
Sound  
Your refrigerator is designed  
to run more efficiently to keep  
your food items at the desired  
temperature. The high efficiency  
compressor may cause your  
new refrigerator to run longer  
than your old one, but it is still  
more energy efficient than  
previous models. While the  
refrigerator is running, it is  
normal to hear a pulsating or  
high-pitched sound.  
Normal Operation  
Doors will not  
Food packages are blocking the Rearrange food containers to clear the door and  
close correctly or door open.  
pop open.  
door shelves.  
Ice bin, crisper cover, pans,  
Push bins all the way in and put crisper cover,  
pans, shelves and baskets into their correct  
positions. See the Using Your Refrigerator section  
for more information.  
shelves, door bins, or baskets  
are out of position.  
The doors were removed during Remove and replace the doors according to the  
product installation and not  
properly replaced.  
Removing and Replacing Refrigerator Handles  
and Doors section.  
Refrigerator is not leveled  
properly.  
See Door Alignment in the Refrigeration  
Installation section to level refrigerator.  
Doors are difficult The gaskets are dirty or sticky.  
to open.  
Clean the gaskets and the surfaces that they  
touch. Rub a thin coat of appliance polish or  
kitchen wax on the gaskets after cleaning.  
Door was recently closed.  
When you open the door, warmer air enters the  
refrigerator. As the warm air cools, it can create  
a vacuum. If the door is hard to open, wait one  
minute to allow the air pressure to equalize, then  
see if it opens more easily.  
Refrigerator  
wobbles or  
Leveling legs are not adjusted  
properly.  
Refer to the Leveling and Door Alignment section.  
seems unstable.  
Floor is not level.  
It may be necessary to add shims under the  
leveling legs or rollers to complete installation.  
Lights do not  
work.  
LED interior lighting failure.  
The refrigerator compartment lamp is LED interior  
lighting, and service should be performed by a  
qualified technician.  
Refrigerator has  
an unusual odor. be set to the MAX setting or  
replaced.  
The Air Filter may need to  
Set the Air Filter to the MAX setting. If the odor  
does not go away within 24 hours, the filter may  
need to be replaced. See the Replacing the Air  
Filter section for replacement instructions.  
The interior of  
the refrigerator  
is covered with  
dust or soot.  
The refrigerator is located near a Make sure that the refrigerator is not located  
fire source, such as a fireplace, near a fire source, such as a fireplace, chimney or  
chimney or candle.  
candle.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTy 63  
WARRANTY (USA)  
Should your LG Refrigerator (“Product”) fail due to a defect in materials or workmanship under  
normal home use, during the warranty period set forth below, LG will at its option repair or replace  
the product. This limited warranty is valid only to the original retail purchaser of the product and  
applies only when purchased and used within the United States including U.S. Territories. Proof of  
original retail purchase is required to obtain warranty service under this limited warranty.  
WARRANTY PERIOD  
Sealed System  
Refrigerator  
(Condenser, Dryer, Connecting Tube,  
Refrigerant and Evaporator)  
Linear Compressor  
One (1) year from One (1) year from the Seven (7) years from  
the date of original date of original retail the date of original  
Ten (10) years from the  
date of original retail  
purchase  
retail purchase  
purchase  
retail purchase  
Parts and Labor  
(internal/functional  
parts only)  
Parts and Labor  
Parts only (Consumer  
will be charged for  
labor)  
Part only (Consumer will  
be charged for labor)  
Noises associated with normal operation and failure to follow instructions found in the use and  
care and installation guides or operating the unit in an unsuitable environment will not be covered  
under this warranty.  
Replacement products and parts are warranted for the remaining portion of the original warranty  
period or ninety (90) days, whichever is greater.  
Replacement products and parts may be new or remanufactured.  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED,  
INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED  
BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE.  
NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY  
INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY  
NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY  
OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do  
not allow the exclusion or limitation of incidental or consequential damages or limitations on how  
long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This  
warranty gives you specific legal rights and you may also have other rights that vary from state  
to state.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64 WARRANTy  
THIS LIMITED WARRANTY DOES NOT COVER:  
1. Service trips to deliver, pick up, install, or repair the product; instruct the customer on operation  
of the product; repair or replace fuses or correct wiring or plumbing, or correction of unauthorized  
repairs/installation.  
2. Failure of product to perform during power failures and interruptions or inadequate electrical service.  
3. Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate  
or interrupted water supply or inadequate supply of air.  
4. Damage resulting from operating the product in a corrosive atmosphere or contrary to the  
instructions outlined in the product owner’s manual.  
5. Damage to the product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of  
God.  
6. Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair  
includes use of parts not approved or specified by LG.  
7. Damage or failure caused by unauthorized modification or alteration, or if it is used for other than the  
intended purpose, or any water leakage where the unit was not properly installed.  
8. Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial  
or industrial use, or use of accessories, components, or consumable cleaning products that are not  
approved by LG.  
9. Damage caused by transportation and handling, including scratches, dents, chips, and/or other  
damage to the finish of your product, unless such damage results from defects in materials or  
workmanship and is reported within one (1) week of delivery (Call: 1-800-243-0000).  
10. Damage or missing items to any display, open box, discounted, or refurbished product.  
11. Products with original serial numbers that have been removed, altered, or can not be readily  
determined. Model and Serial numbers, along with original retail sales receipt, are required for  
warranty validation.  
12. Increases in utility costs and additional utility expenses.  
13. Replacement of light bulbs, filters, or any consumable parts.  
14. Repairs when your product is used in other than normal and usual household use (e.g. commercial  
use, offices, and recreational facilities) or contrary to the instructions outlined in the product owner’s  
manual.  
15. Costs associated with removal of your product from your home for repairs.  
16. The removal and reinstallation of the product if it is installed in an inaccessible location or is not  
installed in accordance with published installation instructions, including LG’s owner’s and installation  
manuals.  
17. Shelves, door bins, drawers, handles, accessories, and other parts besides those that were originally  
included with this particular model.  
18. Service trips to your home to teach you how to use the product.  
19. Replacement of the water filter cartridge due to water pressure that is outside the specified  
operating range or due to excessive sediment in the water supply.  
The cost of repair or replacement under these excluded circumstances shall be borne  
by the consumer.  
For complete warranty details and customer assistance, please call or visit our website:  
Call 1-800-243-0000 (24 hours a day, 365 days a year) and select the appropriate option from the  
menu, or visit our website at http://www.lg.com Or by mail: LG Customer Information Center:  
P. O. Box 240007, 201 James Record Road Huntsville, Alabama 35813 ATTN: CIC  
Write your warranty information below: _______________________________________________  
Product Registration Information: _____________________________________________________  
Model: ____________________________________________________________________________  
Serial Number: _____________________________________________________________________  
Date of Purchase: __________________________________________________________________  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTy 65  
WARRANTY (Canada)  
WARRANTY: Should your LG Refrigerator (“Product”) fail due to a defect in material or workmanship  
under normal home use during the warranty period set forth below, LG Canada will at its option  
repair or replace the Product upon receipt of proof of original retail purchase. This warranty is valid  
only to the original retail purchaser of the product and applies only to a Product distributed in Canada  
by LG Canada or an authorized Canadian distributor thereof. The warranty only applies to Products  
located and used within Canada.  
WARRANTY PERIOD: (Note: If the original date of purchase can not be verified,  
the warranty will begin sixty (60) days from the date of manufacture)  
Refrigerator/  
Freezer  
Sealed System  
(Condenser, Dryer, Connecting Tube,  
Refrigerant and Evaporator)  
Linear Compressor  
One (1) year from  
the date of original  
retail purchase  
One (1) year from  
the date of original  
retail purchase  
Seven (7) years from  
the date of original  
retail purchase  
Ten (10) years from the  
date of original retail  
purchase  
Parts and Labor  
(internal/functional  
parts only)  
Parts and Labor  
Parts only (Consumer  
will be charged for  
labor)  
Part only (Consumer will  
be charged for labor)  
Noises associated with normal operation and failure to follow instructions found in the use and care  
and installation guides or operating the unit in an unsuitable environment will not be covered under  
this warranty.  
Replacement products and parts are warranted for the remaining portion of the original warranty  
period or ninety (90) days, whichever is greater.  
Replacement products and parts may be new or remanufactured.  
LG Authorized Service Center warranties their repair work for thirty (30) days.  
LG CANADA’S SOLE LIABILITY IS LIMITED TO THE WARRANTY SET OUT ABOVE. EXCEPT  
AS EXPRESSLY PROVIDED ABOVE, LG CANADA MAKES NO AND HEREBY DISCLAIMS  
ALL OTHER WARRANTIES AND CONDITIONS RESPECTING THE PRODUCT, WHETHER  
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR  
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND  
NO REPRESENTATIONS SHALL BE BINDING ON LG CANADA. LG CANADA DOES NOT  
AUTHORIZE ANY PERSON TO CREATE OR ASSUME FOR IT ANY OTHER WARRANTY  
OBLIGATION OR LIABILITY IN CONNECTION WITH THE PRODUCT. TO THE EXTENT THAT  
ANY WARRANTY OR CONDITION IS IMPLIED BY LAW, IT IS LIMITED TO THE EXPRESS  
WARRANTY PERIOD ABOVE. LG CANADA, THE MANUFACTURER OR DISTRIBUTOR SHALL  
NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, DIRECT OR INDIRECT  
DAMAGES, LOSS OF GOODWILL, LOST PROFITS, PUNITIVE OR EXEMPLARY DAMAGES  
OR ANY OTHER DAMAGE, WHETHER ARISING DIRECTLY OR INDIRECTLY FROM ANY  
CONTRACTUAL BREACH, FUNDAMENTAL OR OTHERWISE, OR FROM ANY ACTS OR  
OMISSIONS, TORT, OR OTHERWISE. This warranty gives you specific legal rights. You may  
have other rights which may vary from province to province depending on applicable provincial  
laws. Any term of this warranty that negates or varies any implied condition or warranty under  
provincial law is severable where it conflicts with provincial law without affecting the remainder  
of this warranty’s terms.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66 WARRANTy  
THIS LIMITED WARRANTY DOES NOT COVER:  
1. Service trips to deliver, pick up, or install the product; instructing a customer on operation of  
the product; repair or replacement of fuses or correction of wiring or plumbing, or correction of  
unauthorized repairs/installation.  
2. Failure of the product to perform during power failures and interruptions or inadequate electrical  
service.  
3. Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate  
or interrupted water supply or inadequate supply of air.  
4. Damage resulting from operating the Product in a corrosive atmosphere or contrary to the  
instructions outlined in the Product owner’s manual.  
5. Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of  
God.  
6. Damage resulting from the misuse, abuse, improper installation, repair, or maintenance of the  
Product. Improper repair includes use of parts not approved or specified by LG Canada.  
7. Damage or product failure caused by unauthorized modification or alteration, or use for other than its  
intended purpose, or resulting from any water leakage due to improper installation.  
8. Damage or Product failure caused by incorrect electrical current, voltage, or plumbing codes,  
commercial or industrial use, or use of accessories, components, or cleaning products that are not  
approved by LG Canada.  
9. Damage caused by transportation and handling, including scratches, dents, chips, and/or other  
damage to the finish of your product, unless such damage results from defects in materials or  
workmanship and is reported within one (1) week of delivery.  
10. Damage or missing items to any display, open box, discounted, or refurbished Product.  
11. Products with original serial numbers that have been removed, altered, or cannot be readily  
determined. Model and Serial numbers, along with original retail sales receipt, are required for  
warranty validation.  
12. Increases in utility costs and additional utility expenses.  
13. Replacement of light bulbs, filters, or any consumable parts.  
14. Repairs when your Product is used in other than normal and usual household use (including, without  
limitation, commercial use, in offices or recreational facilities) or contrary to the instructions outlined  
in the Product owner’s manual.  
15. Costs associated with removal of the Product from your home for repairs.  
16. The removal and reinstallation of the Product if it is installed in an inaccessible location or is not  
installed in accordance with published installation instructions, including the Product owner’s and  
installation manuals.  
17. Shelves, door bins, drawers, handles, and accessories to the Product. Also excluded are parts  
besides those that were originally included with the Product.  
18. Service trips to your home to teach you how to use the product.  
19. Replacement of the water filter cartridge due to water pressure that is outside the specified  
operating range or due to excessive sediment in the water supply.  
All costs associated with the above excluded circumstances  
shall be borne by the consumer.  
For complete warranty details and customer assistance, please call or visit our website:  
Call 1-888-542-2623 (24 hours a day, 365 days a year) and select the appropriate option from the  
menu, or visit our website at http://www.lg.com  
Write your warranty information below: _________________________________________________  
Product Registration Information: _______________________________________________________  
Model: ______________________________________________________________________________  
Serial Number: _______________________________________________________________________  
Date of Purchase: ____________________________________________________________________  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LG Customer Information Center  
For inquiries or comments,  
visit www.lg.com or call;  
USA, Consumer User  
1-800-243-0000  
USA, Commercial User  
1-888-865-3026  
CANADA  
1-888-542-2623  
Register your product Online!  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Indoor Furnishings K18P103 User Manual
Liebert Power Supply UPStation GX User Manual
Linear Automobile Electronics 45 VDC User Manual
Link electronic Switch 816 OP HD User Manual
LST Smoke Alarm 2100RFT AS User Manual
Magnavox CD Player AZ7271 User Manual
Makita Cordless Drill BHP456LXPHOL1 User Manual
Makita Drill 6337DWDLE User Manual
Mercedes Benz Automobile 2002 S 430 User Manual
Midland Radio Weather Radio WR 120 User Manual