Owner's Manual
IPS LED MONITOR
(LED MONITOR)
Please read the safety information carefully before using the
product.
IPS LED Monitor (LED Monitor) Model List
29UM65
29UB65
Download from Www.Somanuals.com. All Manuals Search And Download.
LICENSE
3
LICENSE
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
VESA, VESA logo, Display Port Compliance Logo and Display Port
Compliance Logo for dual-mode source are all registered trademarks of the
Video Electronics Standards Association.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
User Manual/Card
Power Cord
AC/DC Adapter
HDMI Cable
29UB65
OPTIONAL ACCESSORIES
Display Port Cable
Stand Base
The DisplayPort cable may not
y y
be available in some areas.
29UM65
(Black)
(Sliver)
Cable Holder
Screws
Stand Base
CAUTION
Stand Body
Always use genuine components to ensure safety and product performance.
y y
The product warranty will not cover damage or injury caused by the use of counterfeit components.
y y
NOTE
Note that the components may look different from those shown here.
y y
Without prior notice, all information and specifications in this manual are subject to change to im-
y y
prove the performance of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the
y y
retail store where you purchased the product.
The DisplayPort cable may not be available in some areas.
y y
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
5
Component and Button Description
29UM65
Power Indicator
On: power is on
y y
Off: power is off
y y
(Power Button)
Ports
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ASSEMBLING AND PREPARING
29UB65
Power Indicator
On: power is on
y y
Off: power is off
y y
(Power Button)
Ports
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
7
Moving and Lifting the Monitor
When holding the monitor, the screen should
y y
face away from you to prevent it being
scratched.
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
It is advisable to place the monitor in the
y y
original box or packing material before at-
tempting to move it.
Before moving or lifting the monitor, discon-
y y
nect the power cord and all cables.
Hold the top and bottom of the monitor frame
y y
When moving the monitor, avoid any strong
y y
firmly. Do not hold the panel itself.
shock or vibrations to the product.
When moving the monitor, keep it upright,
y y
never turn the monitor on its side or tilt it
sideways.
CAUTION
As far as possible, avoid touching the moni-
y y
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
29UM65
29UB65
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ASSEMBLING AND PREPARING
Tighten two screws into the back of the stand
body .
4
Installing the Monitor
Assembling the stand base
29UM65
Place the screen face down.
1
2
CAUTION
To protect the screen from scratches, cover
y y
the surface with a soft cloth.
(Black)
First, please insert Stand Body to Stand Base,
Then tighten two screws into the back of the
stand base.
Stand Body
120 mm
Or
(Black)
Stand Base
100 mm
CAUTION
Applying excessive force when tightening
the screws may cause damage to the moni-
tor. Damage caused in this way will not be
covered by the product warranty.
(Silver)
Check the direction of the stand body
(front, back) and then mount the stand body
onto the stand hinge.
3
CAUTION
It may hurt your foot off the stand, so be
careful.
Stand Hinge
Stand Body
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
9
29UB65
Using the cable holder
29UM65
Place the screen face down.
1
2
CAUTION
First, as shown in the illustration,push the
cable holder on the stand body, Second ,Fix
the cable holder to stand body.
1
To protect the screen from scratches, cover
y y
the surface with a soft cloth.
Insert the stand base into the hook of the
stand body.
CAUTION
It may hurt your foot off the stand, so be
careful.
Stand Body
Put the cables into the cable holder.
2
Stand Base
Stand Body
Fix by turning the screw to the right with a coin.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
10 ASSEMBLING AND PREPARING
Remove the two screws from the Stand Base.
Remove the Stand Base from the Stand Body.
4
Detaching the stand base
29UM65
Stand Body
Stand Base
Place the screen face down.
1
CAUTION
To protect the screen from scratches, cover
y y
the surface with a soft cloth.
First, press the the cable holder as shown in
the illustration, Second ,Remove the cable
holder from the stand body.
2
(Silver)
Stand Body
CAUTION
Remove the two screws on the back of stand
body.
3
Illustrations in this document represent typi-
y y
cal procedures, so they may look different
from the actual product.
As shown in the illustration, disconnect the
Do not carry the monitor upside down by just
y y
stand body from the stand hinge.
holding the stand base. This may cause the
monitor to fall off the stand and could result
in personal injury.
When lifting or moving the monitor, do not
y y
touch the monitor screen. Applying force or
pressure may damage the monitor screen.
Instead, hold the stand body or the plastic
frame of the product.
Stand Hinge
Stand Body
(Black)
or
(Black)
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING 11
Remove the two screws from the stand body.
Stand Body
3
29UB65
Place the screen face down.
1
CAUTION
To protect the screen from scratches, cover
y y
the surface with a soft cloth.
Turn the screw to the left using a coin.
1
2
2
Detach the stand base.
Stand Body
CAUTION
The components in the illustrations may dif-
y y
fer from the actual product.
Do not carry the monitor upside down, as this
y y
may cause it to fall off its stand and result in
damage or injury.
To avoid damaging the screen when lifting
y y
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
Stand Base
Download from Www.Somanuals.com. All Manuals Search And Download.
12 ASSEMBLING AND PREPARING
Connect the adapter to the monitor, then plug
the power cord into the power outlet.
2
Installing onto a table
Lift the monitor and place it on the table in an
upright position.
1
29UM65
Place at least 10 cm away from the wall to
ensure sufficient ventilation.
29UM65
10 cm
10 cm
10 cm
10 cm
29UB65
29UB65
Press the
the monitor to turn it on.
(Power) button on the bottom of
3
10 cm
10 cm
10 cm
CAUTION
10 cm
Unplug the power cord prior to moving or
y y
installing the monitor. There is risk of electric
shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING 13
The height can be adjusted up to 110.0 mm.
3
Adjusting the stand height
110.0 mm
29UB65
Stand the monitor assembled with the stand
base in an upright position
1
2
Remove the tape attached to the bottom
back of the stand body and then pull out the
locking pin while pressing the head down-
ward.
CAUTION
Once the pin is removed, it is not necessary
y y
Stand Body
to re-insert it to adjust the height.
Tape
WARNING
Locking Pin
Do not put your fingers or
y y
hand between the screen
and the base (chassis) when
adjusting the screen's height.
Head
Locking pin
Download from Www.Somanuals.com. All Manuals Search And Download.
14 ASSEMBLING AND PREPARING
Adjusting the angle
WARNING
Place the monitor in an upright position, mount-
ed on the stand base.
1
2
To avoid injury to the fingers when adjusting
y y
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
Adjust the angle of the screen. The angle of the
screen can be adjusted forwards or backwards
for a comfortable viewing experience.
29UM65
29UM65
20
-5
Rear Side
Front Side
29UB65
29UB65
Be careful not to touch or press the screen
y y
area when adjusting the angle of the monitor.
29UM65
Rear Side
Front Side
29UB65
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING 15
Rotate the monitor clockwise as shown in the
figure.
3
29UB65
Pivot feature
The pivot feature allows the monitor to rotate 90
clockwise.
Head
Complete the installation by rotating the
monitor 90° as shown below.
4
Stand
WARNING
To avoid scratching the stand base, make
y y
sure that when rotating the monitor using
the pivot feature, the stand does not make
contact with the monitor.
WARNING
Take care when rotating the monitor if the
y y
cable is connected.
Raise the monitor up to the maximum height.
1
NOTE
An image displayed on the monitor's screen
y y
does not rotate according to the screen
orientation.
Adjust the angle of the monitor in the direction
of the arrow as shown in the figure.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
16 ASSEMBLING AND PREPARING
Using the Kensington lock
Installing the wall mount plate
The Kensington security system connector is locat-
ed at the back of the Monitor set.
This monitor supports the specification of the stan-
dard wall mount plate or compatible device.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
Place the screen face down. To protect the
screen from scratches, cover the surface with a
soft cloth.
1
Connect the Kensington security system cable
between the Monitor set and a table.
Place the wall mount plate onto the monitor
and align it with the screw holes.
2
3
Using a screwdriver, tighten the four screws to
fix the plate onto the monitor.
29UM65
Wall Mount Plate
29UB65
NOTE
The wall mount plate is sold separately.
y y
For more information on installation, refer to
y y
the wall mount plate's installation guide.
Be careful not to use excessive force when
y y
mounting the wall mount plate, as this can
damage the monitor's screen.
NOTE
Use of the Kensington lock is optional.
y y
The accessories can be purchased at
your local electronics store.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING 17
75 x 75
M4 x 10
VESA (A x B)
Stand Screw
Installing to a wall
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. De-
tailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
4
Required Screws
CAUTION
Unplug the power cord before moving or in-
y y
stalling the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a
y y
slanted wall may result in the monitor falling
off, which could lead to injury. Please use
the genuine LG wall mounting bracket. For
more information, contact your local retail
store or a qualified installer.
10 cm
Applying excessive force when fastening
y y
screws may cause damage to the moni-
tor. Damage caused in this way will not be
covered by the product warranty.
10 cm
10 cm
Use the wall mounting bracket and screws
y y
that conform to the VESA standard. Dam-
age caused by the use or misuse of inap-
propriate components will not be covered
by the product warranty.
10 cm
To install the monitor to a wall, attach a wall mount-
ing bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely
fixed to the monitor and to the wall.
Screw length from outer surface of back
y y
cover should be under 8mm.
Wall mount Pad
1 Use the screws and wall mounting bracket that
comply with the VESA standard.
Back Cover
2 Screws which are longer than the standard
length may damage the inside of the monitor.
3 A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Elec-
tronics is not liable for any accidents relating to
the use of non-standard screws.
Wall mount Pad
Back Cover
Standard screw
4 VESA compatible only with respect to screw
mounting interface dimensions and mounting
screw specifications
Max.8mm
5 Use it according to the VESA standard as speci-
fied below.
NOTE
784.8 mm or less
y y
Use the screws specified by the VESA stan-
y y
* Thickness of the wall mount plate: 2.6 mm
* Fastening screw: Diameter 4.0 mm x Pitch 0.7
mm x Length 10 mm
dard.
The wall mount kit includes the installation
y y
guide and all necessary parts.
The wall mounting bracket is optional. The
787.4 mm or greater
y y
y y
*
Use the wall mount plate and screws that con-
form to the VESA standard
accessories can be purchased at your local
retail store.
.
The length of the screw may differ for each
y y
wall mounting bracket. Ensure the correct
length screw is used.
For more information, please refer to the
y y
user manual for the wall mounting bracket.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 USING THE MONITOR
29UB65
USING THE MONITOR
(sold separately)
Connecting to a PC
This monitor supports the *Plug and Play
y y
feature.
*Plug and Play: A feature that allows you to
add a device to your computer without having
to reconfigure anything or install any manual
drivers.
DVI connection
(sold separately)
Transmits digital video signals to the monitor. Con-
nect the monitor using the DVI cable as illustrated
below.
Press the menu button and then select the input
option from the input menu.
To hear the sound in DVI input mode, connect the
PC's AUDIO OUT port to the monitor's AUDIO IN
(PC) port using the audio cable that came with the
product.
CAUTION
Connect the input signal cable and
y y
29UM65
turn in the direction of the arrow.
To prevent disconnection secure
the cable tightly.
Do not press on the screen for a
y y
prolonged period of time. This may cause
image distortion.
Do not display a still image on the screen
y y
(sold separately)
for a prolonged period of time. This may
cause image retention. If possible, use the
screen saver.
NOTE
When connecting the power cord to the out-
y y
let, use a grounded (3-hole) multi-socket or a
grounded power outlet.
(sold separately)
The monitor may flicker when turned on in an
y y
area of low temperature. This is normal.
Sometimes red, green, or blue spots may ap-
y y
pear on the screen. This is normal.
Using a DVI to HDMI cable may cause com-
y y
patibility issues.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 19
HDMI connection
DisplayPort connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable as illustrated below.
Transmits the digital video and audio signals from
your PC to the monitor. Connect your PC to the
monitor using the display port cable as illustrated
below.
Press the menu button and then select the input
option from the input menu.
Press the menu button and then select the input
option from the input menu.
29UM65
29UM65
(sold separately)
29UB65
29UB65
(sold separately)
NOTE
NOTE
HDMI PC may cause device compatibility
y y
There may be no video or audio output de-
y y
issues.
Using a DVI to HDMI cable may cause com-
pending on the DP version of the PC.
y y
The DisplayPort cable may not be available
y y
patibility issues.
in some areas.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 USING THE MONITOR
Connecting to AV Devices
29UB65
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable as illustrated below.
Press the menu button and then select the input
option from the input menu.
29UM65
(sold separately)
(sold separately)
NOTE
Using a DVI to HDMI cable may cause com-
y y
patibility issues.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 21
NOTE
Connecting to External Devices
Headphone port connection
For an angle plug earphone, it is difficult
y y
connect it with a peripheral device, so use a
straight type.
Use the headphone port to connect a peripheral
device to the monitor. Connect as illustrated.
29UM65
Angle Type
Straight Type
(sold separately)
NOTE
Depending on the audio settings of the PC
y y
and external device, headphone and speaker
functions may be limited.
29UB65
(sold separately)
Download from Www.Somanuals.com. All Manuals Search And Download.
22 INSTALLING LG Monitor Software
INSTALLING LG MONITOR SOFTWARE
Insert the the owner's manual CD included in the product package into your PC's CD driver and install the
LG Monitor Software.
Check "I accept the terms of the agreement" on
the License Agreement screen and then click
the [Next] button.
Set the default Web browser to Internet Explorer.
4
1
Select the program that you want to install.
5
Click the "LG Monitor Software" on the CD's
2
main screen. When the file download window
appears, click the Run button. (The file down-
load window may vary depending on the oper-
ating system and the Internet Explorer version,
but the installation procedures are same.)
NOTE
Screen Split: This program automatically
y y
splits the program window as desired.
This program not supported Windows XP.
Auto Resolution: This is a program that
y y
CAUTION
automatically changes the resolution to the
optimal settings when connecting the monitor
to the PC in PBP mode.
This program is not supported in Clone
Mode.
Service Pack 1 or higher is required for
y y
Windows 7.
Extended Mode is not supported when
using a single display.
This program not supported Windows XP &
Vista.
Follow the instructions to proceed with the
installation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING LG Monitor Software 23
The LG Monitor Software installation starts as
shown below.
6
NOTE
If you run Screen Split, the Screen Split icon [
] appears in the system tray at the right bottom of
the PC screen.
Right-click the Screen Split icon and select a
layout you want.
The program you selected on the Select
Features page will install automatically.
7
When the installation is complete, restart your
system.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
24 CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
Activating the Main Menu
Navigation OSD
Power Indicator
Power buttons
Press the Power( ) button, the navigation OSD appear.
1
2
3
Jog the Power button left (
), right (
), up ( ), down ( ) to adjust the options.
Press and hold the Power( ) button to exit the OSD menu.
Button
Description
If the menu is
disabled
Enables the navigation OSD.
Close the navigation OSD.
(Long pressMonitor off, This turn off method can work in any condition. Even
though OSD Off.)
Press the power
button center.
If the menu is
enabled
Power Indicator When the monitor is in operating mode, the power indicator will turn on. (powered
on).
When the monitor is in power-saving mode, the power indicator will blinking.
If the menu is
Adjusts the volume level of the monitor.
disabled
Jog the power
button left.
If the menu is
enabled
Enter to Menu OSD.In no sync mode, enter Input change OSD.
If the menu is
Adjusts the volume level of the monitor.
disabled
Jog the power
button right.
If the menu is
Enter to PBP OSD.
enabled
If the menu is
Enables the navigation OSD.
disabled
Jog the power
button up.
If the menu is
Enter to Reader OSD .
enabled
If the menu is
Enables the navigation OSD.
disabled
Jog the power
button down.
If the menu is
enabled
Turn the Minitor off.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 25
Customizing settings
Menu Settings
-Easy control
To view the navigation OSD, press the Power button center ( ) .
1
2
Jog Power button left (
) to go to Menu OSD .
Press Power button center ( ) or Jog Power button right (
)
3
to select Easy control.
Set the options follow up the instruction appear on right bottom of
the screen.
4
5
To return to the upper menu or set other menu items, Jog the
Power left(
).
Each option is described below.
Menu > Easy control
Brightness
Description
Adjusts the color contrast and brightness of the screen.
Contrast
Volume
Adjusts the volume.
NOTE
Jog Power button down (
y y
) in the Volume menu will enable/disable the
Mute function.
Input
Ratio
Selects the current input mode.
Adjusts the screen ratio.
Wide
Displays the video in wide-screen, regardless of the video signal input.
Displays a video according to the input video signal aspect ratio.
Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Original
Cinema 1
Cinema 2
Enlarges the screen with an aspect ratio of 21:9 including the black box area
at the bottom for subtitles. (at 1080p)
1:1
The aspect ratio is not adjusted from the original.
NOTE
The display may look the same for Wide, Original and 1:1 options at the recommended resolution
y y
(2560 x 1080).
The ratio is disabled in the interlaced signal.
y y
Download from Www.Somanuals.com. All Manuals Search And Download.
26 CUSTOMIZING SETTINGS
-Function
To view the navigation OSD, press the Power button
center ( ) .
1
Jog Power button left (
) to go to Menu OSD .
) or down( ) to go
2
3
Jog the power button up(
to Function.
Press Power button center ( ) or Jog Power button
4
5
6
right (
) to select Function.
Set the options follow up the instruction appear on
right bottom of the screen.
To return to the upper menu or set other menu items,
Jog the Power left(
).
Each option is described below.
Menu > Func.
Description
SUPER ENERGY High
Saves energy by using the high-efficiency SUPER ENERGY SAVING function.
Saves energy by using the low-efficiency SUPER ENERGY SAVING function.
Disables the SUPER ENERGY SAVING function.
SAVING
Low
Off
Picture Mode
Custom
Allows the user to adjust each element. The color mode of the main menu can be ad-
justed.
Photo
Cinema
Game
Optimizes the screen to view photos.
Optimizes the screen to improve the visual effects of a video.
Optimizes the screen for gameplay.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 27
-PBP
To view the navigation OSD, press the Power button
center ( ) .
1
Jog Power button left (
) to go to Menu OSD .
) or down( ) to go
2
3
Jog the power button up(
to PBP.
Press Power button center ( ) or Jog Power button
4
5
6
right (
) to select PBP.
Set the options follow up the instruction appear on
right bottom of the screen.
To return to the upper menu or set other menu items,
Jog the Power left(
).
Menu > PBP
PBP
Description
Displays the screens of two input modes on one monitor.
Input
Main
Sub
Displays the video in wide-screen, regardless of the video signal input.
Displays a video according to the input video signal aspect ratio.
Audio
Swap
Changes the audio output in PBP mode.
Toggles between the main screen and sub screen in PBP mode.
Converts the sub screen of PBP mode to the wide screen.
Adjusts the aspect ratio of the main screen or sub screen.
Main Wide
Sub Full
Ratio
Displays the video to fit the Main screen, regardless of the video signal input.
Original
Sub Wide
Original
Displays the video in the input video signal aspect ratio on the Main screen.
Displays the video to fit the Sub screen, regardless of the video signal input.
Displays the video in the input video signal aspect ratio on the Sub screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 CUSTOMIZING SETTINGS
-Screen
To view the navigation OSD, press the Power button
center ( ) .
1
Jog Power button left (
) to go to Menu OSD .
) or down( ) to go
2
3
Jog the power button up(
to Screen.
Press Power button center ( ) or Jog Power button
4
5
6
right (
) to select Screen.
Set the options follow up the instruction appear on
right bottom of the screen.
To return to the upper menu or set other menu items,
Jog the Power left(
).
Each option is described below.
Menu > Screen
Description
Picture Sharpness
Black Level
Adjusts the sharpness of the screen.
Sets the offset level (for HDMI only).
Offset: as a reference for a video signal, this is the darkest color the monitor can
y
display.
High
Low
The picture of the screen gets brighter.
The picture of the screen gets darker.
Response Time Sets a response time for displayed pictures based on the speed of the screen. For a nor-
mal environment, it is recommended that you use Normal. For a fast-moving picture, it is
recommended that you use High.
Setting to High may cause image sticking.
High
Sets the response time to High.
Sets the response time to Middle.
Sets the response time to Low.
Sets the response time to Off.
Middle
Low
Off
Color
Gamma
Custom gamma setting: When using the gamma 0, gamma 1, and gamma 2 monitor set-
tings, higher gamma settings mean a brighter image is displayed and vice versa.
Color Temp
Custom
Red
You can customize the picture color using Red, Green, and Blue colors.
Green
Blue
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Six Color
Meets the user requirements for colors through adjusting the color and saturation of the six
colors(red_Hue, red_Saturation, green_Hue, green_Saturation, blue_Hue, blue_Satu-
ration, cyan_Hue, cyan_Saturation, magenta_Hue, magenta_Saturation, yellow_Hue,
yellow_Saturation) and saving the settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the value, less satu-
rated and bright the colors become. The higher the value, the more saturated and dark the
colors become.
*Reset: Returns the color settings to the default settings.
Reset
Returns the color settings to the default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 29
-Settings
To view the navigation OSD, press the Power button center ( ) .
1
2
Jog Power button left (
) to go to Menu OSD .
) or down( ) to go to Settings.
Jog the power button up(
3
4
Press Power button center ( ) or Jog Power button right (
)
to select Settings.
Set the options follow up the instruction appear on right bottom of
the screen.
5
6
To return to the upper menu or set other menu items, Jog the
Power left(
).
Each option is described below.
Menu > Settings
Description
Main audio have four options.HDMI1, HDMI2, DP, Audio-In.
Main Audio
If user select Audio-in, then sound comes from stereo cable source.
Language
Sets the menu screen to the desired language.
Power LED
Turns the power indicator on the front side of the monitor on/off.
On
Off
The power indicator is automatically turned on.
The power indicator is turned off.
OSD Lock
Prevents incorrect key input.
On
Key input is disabled.
NOTE
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast,
Volume, Input, and Settings are disabled.
Off
Key input is enabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 CUSTOMIZING SETTINGS
-Reset
To view the navigation OSD, press the Power button
center ( ) .
1
Jog Power button left (
) to go to Menu OSD .
) or down( ) to go
2
3
Jog the power button up(
to Reset.
Press Power button center ( ) or Jog Power button
4
5
6
right (
) to select Reset.
Set the options follow up the instruction appear on
right bottom of the screen.
To return to the upper menu or set other menu items,
Jog the Power left(
).
Each option is described below.
Menu > Reset
Description
Do you want to reset your settings?
Reset
Returns to the default settings.
Cancel the select.
Cancel
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 31
Reader Settings
To view the navigation OSD, press the Power button center ( ) .
1
Jog Power button up (
) to go to Reader OSD.
2
3
Set the options follow up the instruction appear on bottom of the
screen.
Each option is described below.
Reader Mode
Reader 1
Description
It is a mode that the screen is adjusted to the best for the newspaper. If you
want screen more bright, you can control brightness in Menu OSD.
Reader 2
It is a mode that the screen is adjusted to the best for the cartoon. If you want
screen more bright, you can control brightness in Menu OSD.
Reader Off
It is a mode that reader mode is off.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 TROUBLESHOOTING
TROUBLESHOOTING
Nothing is displayed on the screen.
Is the monitor's power cord plugged
in?
Check if the power cord is correctly plugged in to the power outlet.
y
Is the power indicator on?
Check the power cable connection and press the power button.
Check that the connected input is enabled (Menu - Input).
y
y
Is the power indicator displaying ?
Is the power indicator blinking?
If the monitor is in power-saving mode, move the mouse or press any
key on the keyboard to switch the display on.
y
Check if the computer is turned on.
y
y
Is the "OUT OF RANGE" message
displayed?
This occurs when signals transferred from the PC (video card) are out
of the horizontal or vertical frequency range of the monitor. Please see
the "Product Specification" section of this manual to set the appropri-
ate frequency.
Is the "CHECK SIGNAL CONNEC-
TION" message is displayed?
This is displayed when the signal cable between the PC and the moni-
tor is missing or disconnected. Check the cable and reconnect.
y
The screen retains an image.
Does image sticking occur even
when the monitor is turned off?
Displaying a still image for a prolonged time may cause damage to the
screen, resulting in the retention of the image.
Use a screen saver to protect the screen when using the monitor for a
prolonged period of time.
y
y
The screen is flickering.
Did you select the recommended
resolution?
If the selected resolution is HDMI 1080i 60/50 Hz, the screen
may be flickering. Change the resolution to the recommended
resolution 1080P.
y
NOTE
Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per
y y
second like a fluorescent lamp.
The number of times the screen is refreshed per second is called vertical frequency or refresh rate
and is represented by Hz.
Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle.
y y
The number of horizontal lines displayed in one second can be calculated by dividing one by the hori-
zontal cycle. This is called horizontal frequency and is represented by kHz.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 33
NOTE
Check if the video card's resolution or frequency is within the range allowed by the monitor and set to
y y
the recommended (optimal) resolution in Control Panel > Display > Settings.
Failing to set the video card to the recommended (optimal) resolution may result in blurred text, a
y y
dimmed screen, a truncated display area or misalignment of the display.
The configuration procedure may differ depending on your computer and/or operating system. Also,
y y
some video cards may not support certain resolutions. If this is the case, contact the manufacturer of
the computer or video card for assistance.
Some video cards may not support the 2560x1080 resolution.
y y
If the resolution cannot be displayed, contact the manufacturer of your video card.
The display color is abnormal.
Does the display appear discolored
(16 color)?
Set the color to 24 bit (true color) or higher. In Windows, go to Control
Panel > Display > Settings > Color Quality.
y
y
y
Does the display color appear un-
stable or in monochrome?
Check if the signal cable is connected properly. Reconnect the cable
or reinsert the PC's video card.
Are there spots on the screen?
When using the monitor, pixilated spots (red, green, blue, white or
black) may appear on the screen. This is normal for the LCD screen.
It is not an error nor is it related to the monitor's performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 SPECIFICATIONS
SPECIFICATIONS
29UM65
29UB65
LCD Screen
Type
73.025 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 73.025 cm
Pixel Pitch
0.0876 mm x 0.2628 mm
2560 x 1080 @ 60 Hz
Resolution
Maximum Resolution
Recommended Resolution 2560 x 1080 @ 60 Hz
Video Signal
Horizontal Frequency
Vertical Frequency
Synchronization
30 kHz to 90 kHz
DVI/DP:50 Hz to 75 Hz HDMI: 25 Hz to 60 Hz
Separate Sync.
Input Connector DVI-D IN, HDMI IN1, HDMI IN2 , DisplayPort, Audio In(PC), H/P
Power
Voltage
19 V
2.4 A
Power consumption (Typ.)
*
On mode: 31 W (ENERGY STAR® standard)
Power Saving Mode ≤ 0.5 W
Off Mode ≤ 0.5 W
AC/DC adaptor
DA-48F19 type, Asian Power Devices Inc. production,
Or LCAP35 type,LIEN CHANG ELECTRONIC ENTERPRISE production.
Output: 19 V
2.53 A
Environmental
Conditions
Operating Condition
Storing Condition
Temperature: 10°C to 35°C; Humidity: 10% to 80%
Temperature: -20°C to 60°C; Humidity: 5% to 90%
Speaker Wattage 7 W + 7 W
29UM65
Stand Angle
Adjustment
Forwards/Backwards: -5° to 20° (Head)
Monitor Size (Width x Height x Depth)
Dimension
With Stand
703.0 mm x 418.0 mm x 181.0 mm
703.0 mm x 328.0 mm x 64.0 mm
Without Stand
Weight (Without 6.2 kg
Packaging)
29UB65
Stand Angle
Adjustment
Forwards/Backwards: -5° to 15° (Head)
Monitor Size (Width x Height x Depth)
Dimension
With Stand
703.0 mm x 425.0 mm x 225.0 mm
703.0 mm x 418.0 mm x 124.0 mm
Without Stand
Weight (Without 6.8 kg
Packaging)
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR test standard.
®
* ENERGY STAR is a US registered mark of the United States Environmental Protection Agency.
®
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 35
Factory support mode
(Preset Mode, DVI-D/HDMI/PC DisplayPort)
Horizontal Frequency Vertical Frequency
Preset Mode
Polarity (H/V)
Remarks
(kHz)
31.468
31.469
37.5
(Hz)
70.08
59.94
75
720 x 400
-/+
-/-
640 x 480
640 x 480
-/-
800 x 600
37.879
46.875
48.363
60.123
67.5
60.317
75
+/+
+/+
-/-
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 1024
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
2560 x 1080
60
75.029
75
+/+
+/+
+/+
+/+
+/+
+/+
-/+
+/-
-/+
45
60
63.981
79.976
60
60.02
75.025
60
65.290
67.5
59.954
60
66.7
60
HDMI Timing (Video)
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Preset Mode
Remarks
480P
576P
720P
720P
1080P
1080P
31.50
31.25
37.50
45.00
56.25
67.50
60
50
50
60
50
60
Power Indicator
Mode
LED Color
Light On
On Mode
Power-saving
Off Mode
Blinking
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
36 PROPER POSTURE
PROPER POSTURE
Proper Posture for Using the Monitor
Adjust the screen so that you can comfortably view at a slight downward angle from your natural eye level.
Take a break for approximately ten minutes every hour to reduce any fatigue caused by long-time
y y
usage.
The stand of the touch monitor allows the product to be used in the optimum position.
y y
Adjust the stand angle to obtain the best view of the screen.
You should be looking
slightly down at the screen.
Adjust the angle
So that there is no reflection
or glare from the screen.
Place your hands gently on
the keyboard, keeping your
arms bent at the elbows and
extended horizontally in front
of you.
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
Trade Name: LG
Model : 29UM65D,29UB65D
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL: 201-266-2534
*above information is only for USA FCC Regulatory
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial number of the SET
is located on the back and one side of the
SET. Record it below should you ever need
service.
MODEL
SERIAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|