OWNER’S MANUAL
SMART 3D Blu-ray™
HOME THEATER SYSTEM
Please read this manual carefully before operating
your set and retain it for future reference.
BH6730S (BH6730S, S63S2-S/ C, S63T1-W)
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
3
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
FCC RF Radiation Exposure Statement : This
equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body. End users must follow the
specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be
co-located or operating in conjunction with any
other antenna or transmitter.
1
FCC Compliance Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two
conditions:
FCC Radio Frequency Interference
Requirements
(1) This device may not cause harmful interference,
and
This device is restricted to indoor use due to its
operation in the 5.15 to 5.25 GHz frequency range.
FCC requires this product to be used indoors for
the frequency range 5.15 to 5.25 GHz to reduce the
potential for harmful interference to co-channel
Mobile Satellite systems. High power radars are
allocated as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar stations
can cause interference with and/or damage this
device. This device cannot be co-located with any
other transmitter.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
CAUTION: Regulations of the FCC and FAA prohibit
airborne operation of radio-frequency wireless
devices because their signals could interfere with
critical aircraft instruments.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Responsible Party :
LG Electronics USA, Inc. 1000 Sylvan Avenue
Englewood Cliffs, NJ 07632
TEL. : +1-800-243-0000
Reorient or relocate the receiving antenna.
y
y
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to
y
which the receiver is connected.
y
y
Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Getting Started
Caution
Watching a 3D content for a long period
time may cause dizziness or tiredness.
Notes on copyrights
>
y
y
Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
content. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
y
It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
1
If you are experiencing headache, tiredness
or dizziness while viewing content in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
y
Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected content. To
obtain additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact an
authorized Customer Service Center.
y
Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
y
y
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
5
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
1
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold
with the apparatus. When a
cart is used, use caution when
moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Table of Contents
33 Sound Effect
Table of Contents
4
Operating
34 Home Menu Display
1
Getting Started
34 – Using [HOME] menu
34 – Using the Smart Share
35 Playing the Linked Devices
35 – Playing a disc
35 – Playing Blu-ray 3D disc
36 – Playing a file on disc/USB device
37 – Playing a file on a network server
38 Using Home Network Server for PC
38 – Installing Nero MediaHome 4
Essentials
2
8
8
Safety Information
Introduction
– Playable discs and symbols used in
this manual
– About the “7” symbol display
– Regional code
9
9
10 Remote Control
11
11
Front Panel
Rear Panel
38 – Sharing files and folders
39 – About Nero MediaHome 4 Essentials
39 – System requirements
40 General Playback
40 – Basic operations for video and audio
content
40 – Basic operations for photo content
40 – Using the disc menu
41 – Resume playback
2
Connecting
12
13
Positioning the System
Speaker Connection
13 – Attaching the speakers to the player
14 Connecting to Your TV
15 – What is SIMPLINK?
15 – ARC (Audio Return Channel) function
16 – Resolution setting
41 – Last scene memory
42 On-Screen Display
17
17
17
Antenna Connection
Connections with External Device
– AUX connection
42 – To control video playback
42 – Displaying content information on-
screen
18 – PORT. IN connection
44 Advanced Playback
18 – OPTICAL IN connection
44 – Repeat playback
19
Connecting to Your Home Network
44 – Repeating a specific portion
44 – Playing from selected time
45 – Selecting a subtitle language
45 – Hearing a different audio
45 – Watching from a different angle
45 – Changing the TV Aspect Ratio
46 – Changing Subtitle Code Page
46 – Changing the Picture Mode
46 – Viewing content information
47 – Changing content list view
47 – Selecting a subtitle file
48 – Listening to music during slide show
48 – Setting the [3D] option
49 Advanced Features
19 – Wired network connection
19 – Wired network setup
21 – Wireless network connection
21 – Wireless network setup
3
System Setting
24 Initial Setup
25 Settings
25 – Adjust the setup settings
26 – [NETWORK] menu
27 – [DISPLAY] menu
28 – [LANGUAGE] menu
29 – [AUDIO] menu
31 – [LOCK] menu
32 – [OTHERS] menu
49 – Wi-Fi Direct™
50 – Enjoying BD-Live™
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
7
50 – LG AV Remote
65 Network Software Update
50 – Private Sound Mode
51 – Viewing information from Gracenote
Media Database
52 – Audio CD recording
52 – Recording from FM radio or AUX/
PORTABLE source
65 – Network update notification
65 – Software update
67 Additional Information
67 – File requirement
68 – AVCHD (Advanced Video Codec High
Definition)
1
53 Radio Operations
69 – About DLNA
53 – Listening to the radio
53 – Presetting the radio stations
53 – Deleting a saved station
53 – Deleting all the saved stations
53 – Improving poor FM reception
54 Playing the iPod
54 – Enjoying iPod on the screen
54 – Enjoying the iPod IN mode
56 Using Bluetooth technology
56 – Listening to music stored on the
Bluetooth devices
58 Using the Premium
58 Using the LG Smart World
59 – Signing in
59 – Searching online content
60 Using the My Apps Menu
69 – Certain system requirements
69 – Compatibility notes
70 Audio Output Specifications
2
3
4
5
6
71
Area Code List
72 Language Code List
73 Trademarks and Licenses
76 Specifications
78 Maintenance
78 – Handling the unit
78 – Notes on discs
79 Important Information relating to Network
Services
5
Troubleshooting
61
Troubleshooting
61 – General
62 – Network
63 – Picture
63 – Sound
63 – Customer Support
63 – Open Source Software Notice
6
Appendix
64 Controlling a TV with the Supplied
Remote Control
64 – Setting up the remote to control your
TV
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Getting Started
Introduction
1
Playable discs and symbols used in this manual
Media/Term
Logo
Symbol
Description
Discs such as movies that can be purchased or
rented.
y
e
“Blu-ray 3D”discs and“Blu-ray 3D ONLY”discs.
BD-R/RE discs that are recorded in BDAV format.
y
y
Blu-ray
BD-R/RE discs that contain Video, Audio or
Photo files.
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format
y
Discs such as movies that can be purchased or
rented.
y
r
Video mode and finalized only
Supports the dual layer disc also
y
y
DVD-ROM
DVD-R
Finalized AVCHD format
DVD-RW
DVD+R
o
DVD+RW
(8 cm, 12 cm)
DVD R/RW discs that contain Video, Audio or
Photo files.
y
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW (VR)
(8 cm, 12 cm)
VR mode and finalized only
Audio CD
r
t
Audio CD
(8 cm, 12 cm)
CD-R/RW discs that contain Video, Audio or
Photo files.
y
y
y
u
i
CD-R/RW
(8 cm, 12 cm)
ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates special notes and operating features.
Note
–
–
,
>
Indicates cautions for preventing possible damages
from abuse.
Caution
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
9
Note
,
About the “ ” symbol display
7
Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD R/RW) disc itself, some CD-R/RW (or
DVD R/RW) discs cannot be played on the
unit.
y
“7”may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
1
Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD R/RW, BD-R/RE) may not be playable.
y
y
Regional code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labeled same as the rear of the unit or“ALL”.
BD-R/RE, DVD R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
y
This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
y
y
Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
Customers should note that permission
is required in order to download MP3 /
WMA files and audio from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
y
y
You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Getting Started
Remote Control
• • • • • • a • • • • • •
• • • • • • c • • • • •
1
FUNCTION
FUNCTION: Changes input mode. SPEAKER LEVEL: Sets the sound
level of desired speaker.
SUBTITLE: Selects a subtitle
INFO/MENU
language.
SOUND EFFECT: Selects a sound
effect mode.
1(POWER): Switches the player
ON or OFF.
VOL +/-: Adjusts speaker volume.
B(OPEN/CLOSE): Ejects a disc.
OPTICAL/ TV SOUND : Changes
input mode to optical directly.
SLEEP: Sets a certain period of
time after which the unit will
switch to off.
MUTE: Mute the unit.
Colored (R, G, Y, B) buttons:
- Use to navigate BD-ROM menus.
They are also used as shortcut
buttons for specific menus.
- B button: Selects mono/ stereo
in FM mode.
INFO/MENU (m): Displays or
exits On-Screen Display.
HOME ( ): Displays or exits the
[Home Menu].
DISC MENU: Accesses menu on a
disc.
0-9 numerical buttons: Selects
numbered options in a menu.
• • • • • • b • • • • •
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
Direction buttons: Selects an
option in the menu.
PRESET +/-: Selects programme
of Radio.
REPEAT (h): Repeats a desired
section or sequence.
TUNING +/-: Tunes in the desired
radio station.
MUSIC ID: When connected
to the network, can provide
information about the current
song while movie playback.
ENTER (b): Acknowledges menu
selection.
AUDIO: Selects an audio language
or audio channel.
BACK ( ): Exits the menu or
returns to the previous screen.
X(REC): Records from an Audio
CD, FM radio or AUX source to
USB.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
Battery Installation
?: Marked button is not available.
Z(STOP): Stops playback.
z(PLAY): Starts playback.
• • • • • • d • • • • •
M(PAUSE/STEP): Pauses
playback.
TV Control Buttons: See page
C/V(SKIP): Goes to the
next or previous chapter / track /
file.
Remove the battery cover on the
rear of the Remote Control, and
insert R03 (size AAA) battery with
4and 5matched correctly.
c/v(SCAN): Searches
backward or forward.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 11
Front Panel
a
b
c
1
d
e
a Disc Tray
d PORT. IN
b Display Window
e USB (iPod/iPhone/iPad) Port
c Operation buttons
R(Open / Close)
T(Play / Pause)
I(Stop)
F (Function)
Changes the input source or function.
VOL -/+
1/!(Power)
Rear Panel
a
b
c
d e f g
h
a AC power cord
b Speakers connectors
c Cooling Fan
g LAN port
h HDMI OUT TO TV
d AUX (L/R) INPUT
e OPTICAL IN
f Antenna Connector
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Connecting
Caution
Be careful to make sure children not to put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hole for plentiful bass
sound on speaker cabinet (enclosure).
>
Positioning the System
The following illustration shows an example of
positioning the system. Note that the illustrations
in these instructions differ from the actual unit for
explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
y
y
y
y
Place the center speaker at a safe distance
from the child’s reach.
Otherwise it may result in the speaker falling
down and causing personal injury and/or
property damage.
2
position ( ).
A
The speakers contain magnetic parts, so
colour irregularity may occur on the CRT
TV screen or PC monitor screen. Please use
the speakers away from the TV screen or PC
monitor screen.
B
C
G
A
Before using the subwoofer, remove the
protective vinyl.
F
A
A
A
E
A
A
D
Front left speaker (L)/
Front right speaker (R):
A
B
Place the front speakers to the sides of the monitor
or screen and as flush with the screen surface as
possible.
Center speaker:
C
Place the center speaker above or below the
monitor or screen.
Surround left speaker (L)/
Surround right speaker (R):
D
E
Place these speakers behind your listening position,
facing slightly inwards.
Subwoofer:
F
The position of the subwoofer is not so critical,
because low bass sounds are not highly directional.
But it is better to place the subwoofer near the
front speakers. Turn it slightly toward the center of
the room to reduce the wall reflections.
Unit
G
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 13
To connect the cable to the speakers, press each
plastic finger pad to open the connection terminals
on the base of each speaker. Insert the wire and
release the finger pad.
Speaker Connection
Attaching the speakers to the
player
Caution
>
Be careful to make sure children do not put
y
their hands or any objects into the *speaker
duct.
*Speaker duct : A hole for plentiful bass
sound on speaker cabinet (enclosure).
1. Connect the wires to the unit.
Match each wire’s colored band to the same
colored connection terminal on the rear of the
unit. To connect the cable to the unit, press
each plastic finger pad to open the connection
terminal. Insert the wire and release the finger
pad.
2
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
y
Connect the black stripe of each wire to the
terminals marked -(minus) and the other end
to the terminals marked + (plus).
Connect a woofer cord to the player. When
connecting a woofer cord to the player, insert
the connector until it clicks.
2. Connect the wires to the speakers.
Connect the other end of each wire to the
correct speaker according to the color coding:
Color
Grey
Speaker
Rear
Position
Rear right
Rear left
Center
Blue
Rear
Green
Center
Sub
woofer
Orange
Any front position
Red
Front
Front
Front right
Front left
White
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Connecting
Note
,
Connecting to Your TV
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
speed HDMI™ cable with Ethernet). Connect the
HDMI jack on the player to the HDMI jack on a
HDMI compatible TV or monitor.
If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
y
When you use HDMI connection, you can
change the resolution for the HDMI output.
y
y
Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (see page
2
Rear of the unit
Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
y
When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
y
y
HDMI cable not included
TV
If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft.)).
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Additional Information for HDMI
When you connect a HDMI or DVI compatible
device make sure of the following:
y
-
Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-
-
The connected device’s video input is set
correctly for this unit.
The connected device is compatible with
720x480p, 1280x720p, 1920x1080i or
1920x1080p video input.
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
y
-
The picture will not be displayed properly
with non-HDCP device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 15
What is SIMPLINK?
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of this player.
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
To use this function:
-
Your TV must support the HDMI-CEC and ARC
function and the HDMI-CEC and ARC must be
set to On.
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
-
The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about
ARC function, refer to your TV manual.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
2
LG TV’s with SIMPLINK function has the logo as
shown above.
-
-
You must use the HDMI cable (Type A, High
Speed HDMI™ cable with Ethernet).
Note
You must connect with the HDMI IN that
supports the ARC function using the HDMI OUT
on this player.
,
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
-
You can connect only one Home Theater to TV
compatible with ARC.
Note
,
To activate [SIMPLINK / ARC] function, set this
option to [On]. (page 32)
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Connecting
Note
,
Resolution setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution
using [Settings] menu.
If your TV does not accept the resolution
you have set on the player, you can set
resolution to 480p as follows:
y
1. Press Bto open the disc tray.
1. Press HOME ( ).
2
Press Z(STOP) for more than 5 seconds.
2. Use A/Dto select the [Settings] and press
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
y
y
ENTER (b). The [Settings] menu appears.
3. Use W/Sto select [DISPLAY] option then
press Dto move to the second level.
2
4. Use W/Sto select the [Resolution] option
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
then press ENTER (b) to move to the third level.
The 1080p video output frame rate may
be automatically set to either 24 Hz or
60 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
y
5. Use W/Sto select the desired resolution then
press ENTER (b) to confirm your selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 17
Antenna Connection
Connect the supplied antenna for listening to the
radio.
Connections with
External Device
AUX connection
You can enjoy the sound from an external
component through the speakers of this system.
Connect the analog audio output jacks of your
component into the AUX L/R (INPUT) on this unit.
And then select the [AUX] option by pressing
FUNCTION.
2
You can also use the F (Function) button on the
front panel to select the input mode.
Rear of the unit
Rear of the unit
Note
,
Be sure to fully extend the FM wire antenna.
Red
White
To the audio output jacks
of your component
(TV, VCR, etc.)
Download from Www.Somanuals.com. All Manuals Search And Download.
18 Connecting
PORT. IN connection
OPTICAL IN connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
You can enjoy the sound from your portable audio
player through the speakers of this system.
Connect the headphones (or line out ) jack of the
portable audio player into the PORT. IN socket of
this unit. And then select the [PORTABLE] option by
pressing FUNCTION.
Connect the optical output jack of your component
into the OPTICAL IN jack on the unit. And then
select the [OPTICAL] option by pressing FUNCTION.
Or press OPTICAL / TV SOUND to select directly.
You can also use the F (Function) button on the
front panel to select the input mode.
You can also use the F (Function) button on the
front panel to select the input mode.
2
Rear of the unit
To the digital
optical output jack
of your component
Optical cable
not included
MP3 player, etc...
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 19
Connecting to Your
Home Network
Broadband
service
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel or
the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and online
content services.
2
Router
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
DLNA certified servers
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
Note
,
When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
y
Rear of the unit
Wired network setup
Do not connect a modular phone cable to
the LAN port.
y
y
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
If you want to access content from DLNA
servers, this player must be connected to
the same local area network with them via a
router.
y
y
Preparation
To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC.
Before setting the wired network, you need to
connect the broadband internet to your home
network.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Connecting
1. Select [Connection Setting] option in the
2. Use W/S/A/Dto select the IP mode
between [Dynamic] and [Static].
[Settings] menu then press ENTER (b).
Normally, select [Dynamic] to allocate an IP
address automatically.
2
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Note
,
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/Dand numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
Network will automatically be connected to the
unit.
3. Select [Next] and press ENTER (b) to apply
network settings.
Network connection status is displayed on the
screen.
Advanced Setting
If you want to set the network settings manually,
use W/Sto select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
4. Press ENTER (b) while [OK] is highlighted to
finish the wired network settings.
1. Use W/Sto select [Wired] and press ENTER
(b).
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 21
Wireless network connection
Wireless network setup
Another connection option is to use an Access Point
or a wireless router. The network configuration and
connection method may vary depending on the
equipment in use and the network environment.
For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Settings]
menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless router
is required before connecting the player to the
network.
2
Preparation
Wireless
Communication
Before setting the wireless network, you need
to:
-
connect the broadband internet to the
wireless home network.
DLNA certified servers
-
-
set the access point or wireless router.
note the SSID and security code of the
network.
Access Point or
Wireless Router
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Broadband
service
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection
from this player to your home network’s router or
cable/DSL modem is always the best option.
If you choose to use the wireless option, please
note that performance can sometimes be affected
by other electronic devices in the home.
If wired network is not connected to the unit, all
available networks are displayed on the screen.
3. Use W/Sto select a desired SSID of wireless
network and press ENTER (b).
If you have security on your access point, you
need to input the security code as necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Connecting
Note
,
Advanced Setting
If you want to set the network settings manually,
use W/Sto select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
If you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed differently.
1. Use W/Sto select [Wireless] and press ENTER
(b).
2
[AP List] - Scans all available access points or
wireless routers within range and display them
as a list.
Note
,
WEP security mode generally have 4 keys
available on an access point setting. If your
access point or wireless router use WEP
security, enter the security code of the key
“No.1”to connect on your home network.
y
y
[Network name (SSID)] – Your access point
may not be broadcasting its network name
(SSID). Check your access point settings through
your computer and either set your access
point to broadcast SSID, or manually enter the
network name in [Network name(SSID)].
An Access Point is a device that allows you
to connect to your home network wirelessly.
[PBC] – If your access point or wireless
router that supports the PBC (Push Button
Configuration) method, select this option and
press the Push Button on your access point
within 120 counts. You do not need to know the
network name (SSID) and security code of your
access point.
4. Use W/S/A/Dto select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
Note
,
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/Dand numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
[PIN] – If your access point supports the PIN
Code configuration method based on WPS(Wi-
Fi Protected Setup), select this option and
note the code number on the screen. And
then, enter the PIN number on a setting menu
of your access point to connect. Refer to the
documentation for your network device.
5. Select [Next] and press ENTER (b) to apply
2. Follow the instructions of each connection
method on the screen.
network settings.
Note
,
To use PBC and PIN network connection,
security mode of your access point must be
set to OPEN or AES.
Network connection status is displayed on the
screen.
6. Select [OK] and press ENTER (b) to complete
the network connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 23
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
Notes on network connection
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
y
The use of a“Router”may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
y
y
Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
y
y
2
The wireless network operate at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be
affected by interference from them.
Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
y
The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
y
For better reception, place the player from the
access point as close as possible.
y
y
In some instances, placing the access point or
wireless router at least 0.45 m (1.5 ft.) above the
floor may improve the reception.
The reception quality over wireless depends on
many factors such as type of the access point,
distance between the player and access point,
and the location of the player.
y
y
Some internet content may require a higher
bandwidth connection.
y
y
Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
Even if the player is properly connected and
configured, some internet content may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
y
Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
y
y
A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
You must use a Router to use xDSL service.
y
y
A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
Download from Www.Somanuals.com. All Manuals Search And Download.
24 System Setting
5. Use W/S/A/Dto select the IP mode
between [Dynamic] and [Static].
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
Normally, select [Dynamic] to allocate an IP
address automatically.
1. Press 1(POWER).
The initial setup wizard appears on the screen.
2. Use W/S/A/Dto select a display language
and press ENTER (b).
6. Select [Next] and press ENTER (b) to apply
network settings.
3
3. Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
Network connection status is displayed on the
screen.
For details on network settings, refer to
“Connecting to Your Home Network”on page
If wired network is connected, the network
connection setting will automatically be
finished.
4. All available networks are displayed on the
screen. Use W/Sto select [Wired Network]
or desired SSID of wireless network and press
ENTER (b).
If you have security on your access point, you
need to input the security code as necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setting 25
7. Select [Next] and press ENTER (b).
Settings
8. Press ENTER (b) to verify the test tone signals of
the speakers.
Adjust the setup settings
You can change the settings of the player in the
[Settings] menu.
1. Press HOME ( ).
After verifying the test tone signals, press ENTER
(b) while [Stop] is highlighted.
Select [Next] and press ENTER (b).
9. You can listen to TV sound through HTS Speaker
automatically when TV is turned on. TV and HTS
should be connected with optical cable. Press
Wto move and press A/Dto select [On] or
[Off]. Select [Next] and press ENTER (b).
3
2. Use A/Dto select the [Settings] and press
ENTER (b). The [Settings] menu appears.
3. Use W/Sto select the first setup option, and
10. Check all the settings that you have set in the
previous steps.
press Dto move to the second level.
4. Use W/Sto select a second setup option, and
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/Dto
select 1 and press ENTER (b).
press ENTER (b) to move to the third level.
5. Use W/Sto select a desired setting, and press
ENTER (b) to confirm your selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 System Setting
Smart Service Setting
[NETWORK] menu
The [NETWORK] settings are needed to use the
software update, BD-Live and online content
services.
[Country Setting]
Select your area for displaying proper online
content service.
Connection Setting
[Initialize]
If your home network environment is ready to
connect, the unit needs to be set up via wireless
or wired connection for network communication.
(See“Connecting to Your Home Network”on page
[Deactivate Netflix]
Deactivates your player. To activate the
Netflix again, contact to the service provider.
y
[Netflix ESN]
y
Display its unique Netflix ESN (Electronic
Serial Number) that allows you to use the
Netflix streaming.
Connection Status
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection
to the network and the internet have been
established.
[Deactivate Vudu]
Deactivates your player. To activate the Vudu
again, contact to the service provider.
y
3
Device Name
You can make a network name using virtual
keyboard. This player will be recognised by the
name you are entering on your home network.
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
Wi-Fi Direct
[Permitted]
This player is a Wi-Fi Direct™ certified device. Wi-
Fi Direct™ is the technology that enables devices
to connect each other without connecting to an
Access point or a router. Press ENTER (b) to display
device connection.
Internet access is permitted for all BD-Live
content.
[Partially permitted]
Internet access is permitted only for BD-Live
content which have content owner certificates.
Internet access and AACS Online functions are
prohibited for all BD-Live content without a
certificate.
Network Play
This function allows you to control the playback
of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
smartphone has a function to control the playback
media on your home network. Set this option to
[On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
smartphone or the application for more detailed
information.
[Prohibited]
Internet access is prohibited for all BD-Live
content.
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setting 27
Note
,
Resolution
Sets the output resolution of the HDMI video signal.
setting.
This unit and the DLNA Certified
Smartphone must be connected to the
same network.
y
y
To use the [Network Play] function using a
DLNA certified smartphone, press HOME
[Auto]
(
) to display the home menu before
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
connecting to this unit.
While controlling the unit using the
[Network Play] function, the remote control
may not work.
y
y
[480p]
Available file formats described on page
67 are not always supported on [Network
Play] function.
Outputs 480 lines of progressive video.
[720p]
Outputs 720 lines of progressive video.
3
[1080i]
[DISPLAY] menu
Outputs 1080 lines of interlaced video.
[1080p]
TV Aspect Ratio
Select a TV aspect ratio option according to your TV
type.
Outputs 1080 lines of progressive video.
1080p Display Mode
[4:3 Letter Box]
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
[4:3 Pan Scan]
Note
,
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [60 Hz].
y
y
[16:9 Original]
Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 60 Hz to match the
video source format.
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
Note
,
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 System Setting
HDMI Color Setting
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
[LANGUAGE] menu
Display Menu
Select a language for the [Settings] menu and on-
screen display.
[YCbCr]
Select when connecting to a HDMI display
device.
Disc Menu / Disc Audio /
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[RGB]
Select when connecting to a DVI display
device.
[Original]
Refers to the original language in which the
disc was recorded.
3D Mode
Select the type of output mode for Blu-ray 3D disc
playback.
3
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
[Off]
Blu-ray 3D disc playback will output as 2D
mode like a normal BD-ROM disc playback.
[On]
[Off] (Disc Subtitle only)
Blu-ray 3D disc playback will output as 3D
mode.
Turn off Subtitle.
Note
Home Menu Guide
This function allows you to display or delete the
guide bubble on the [HOME] menu. Set this option
to [On] for displaying guide.
,
Depending on the disc, your language setting
may not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setting 29
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[AUDIO] menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
[Off]
Note
Turns off this function.
,
Since many factors affect the type of audio
output, see“Audio Output Specifications”on
page 70 for details.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
Digital Output
[Auto]
[PCM Stereo] (HDMI only)
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
Select if you connect this unit’s HDMI OUT jack
to a device with two-channel digital stereo
decoder.
3
[PCM Multi-Ch] (HDMI only)
Note
Select if you connect this unit’s HDMI OUT jack
to a device with multi-channel digital decoder.
,
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
[DTS Re-Encode] (HDMI only)
Select if you connect this unit’s HDMI OUT jack
to a device with DTS decoder.
[Bit Stream] (HDMI only)
Select if you connect this unit’s HDMI OUT jack
to a device with LPCM, Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD
decoder.
Note
,
When [Digital Output] option is set to [PCM
Multi-Ch], the audio may output as PCM
Stereo if the PCM Multi-Ch information is
not detected from HDMI device with EDID.
y
y
If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted for
the other discs (like [Bit Stream]).
This setting is not available on the input
signal from an external device.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
30 System Setting
Speaker Setup
To obtain the best possible sound, use the speaker
setup display to specify the volume of the speakers
you have connected and their distance from your
listening position. Use the test to adjust the volume
of the speakers to the same level.
3
[Speaker]
Select a speaker that you want to adjust.
[Volume]
Adjust the output level of each speaker.
[Distance]
Adjust the distance between each speaker and
the listening position.
[Test/ Stop test tone]
The speakers will emit a test tone.
[OK]
Confirms the setting.
HD AV Sync
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it effectively‘waits’for the picture to arrive:
this is called HD AV Sync. Use ADto scroll up and
down through the delay amount, which you can
set at anything between 0 and 300 ms.
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setting 31
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[LOCK] menu
The [LOCK] settings affect only Blu-ray Disc and
DVD playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Password
You can create or change the password.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number
[None]
buttons to input an age limit for BD-ROM viewing.
3
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[255]
[Change]
All BD-ROM can be played.
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
If you forget your password
Note
If you forget your password, you can clear it using
the following steps:
,
The [Blu-ray Disc Rating] will be applied
only for the Blu-ray disc that containing the
Advanced Rating Control.
y
y
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Settings] menu.
For the region using MPAA rating level, refer
to the table below as an example.
3. Use Number buttons to enter“210499”. The
password is cleared.
Blu-ray Disc Rating
MPAA Rating
Note
,
0
8
G
PG
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
13
17
18
255
PG-13
R
NC-17
Not restricted
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
Download from Www.Somanuals.com. All Manuals Search And Download.
32 System Setting
TV Sound Connecting
You can listen to TV sound through this unit’s
speaker automatically when TV is turned on. TV and
this unit should be connected with optical cable.
[OTHERS] menu
Auto Power Off
The screen saver appears when you leave the
player in Stop mode for about 5 minutes. If you
set this option to [On], the unit automatically
turns off within 20 minutes since the Screen Saver
is displayed. Set this option to [Off] to leave the
screen saver until the unit is operated by the user.
Note
,
When you set [Auto Power Off] function in
setting menu on, this unit will be off itself to
save electronic consumption in the case main
unit is not connected to external device and is
not used for 25 minutes.
Press Wto move and press A/Dto select [On] or
[Off]. Select [Next] and press ENTER (b).
Initialize
3
So does this unit after six hours since Main unit
has been connected to other device using
analog input.
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
Initializes the BD-Live content from the
connected USB storage.
Note
,
If you reset the player to its original factory
settings using [Factory Set] option, you have to
set all the activation for the online services and
network settings again.
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update server
SIMPLINK/ARC
-
The SIMPLINK function allows you to control this
unit with LG TV’s remote control.
-
The ARC function enables an HDMI capable TV
to send the audio stream to HDMI OUT of this
player.
Set this option to [On] for activating [SIMPLINK /
ARC] function. (page 15)
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setting 33
Setting the [User EQ]
Sound Effect
You can select a suitable sound mode. Press SOUND
EFFECT repeatedly until the desired mode appears
on the front panel display or the TV screen. The
displayed items for the equalizer maybe different
depending on sound sources and effects.
[Natural Plus]: You can enjoy the natural sound
effect same as 5.1 channel.
1. Use W/Sto select the desired frequency.
[Natural]: You can enjoy comfortable and natural
sound.
2. Use A/Dto select the desired level.
[Bypass]: Software with multichannel surround
audio signals is played according to the way it was
recorded.
Select [Cancel] option then press ENTER (b) to
cancel the setting.
Select [Reset] option then press ENTER (b) to reset
the all adjustments.
3
[Bass Blast]: Reinforce the bass sound effect from
front left and right speaker and subwoofer.
[Loudness]: Improves bass and treble sound.
[User EQ]: You can adjust the sound by raising or
lowering the level of specific frequency.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Operating
Using the Smart Share
You can play video, photo and audio content on
the unit by inserting a disc, connecting an USB
device or using home network (DLNA).
Home Menu Display
Using [HOME] menu
The home menu appears when you press HOME
1. Press HOME ( ) to display the home menu.
2. Select [Smart Share] and press ENTER (b).
(
). Use W/S/A/Dto select a category and
press ENTER (b).
Note
,
4
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
a
b
c
Displays all linked devices.
Displays video, photo or audio content.
Displays the file or folder on linked device.
a
b
[Smart Share] - Displays Smart Share menu.
[Premium] - Displays the Premium home
[LG Smart World] - Displays LG Apps titles
provided to the unit. (page 58)
c
d
[My Apps] - Displays the [My Apps] screen.
e
f
[Input] - Changes input mode.
[Settings] - Adjusts the system settings.
[Search] - Searches for desired LG Apps and
other content.
g
h
[Log In] - Displays login menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 35
Playing Blu-ray 3D disc
Playing the Linked
Devices
e
This player can play the Blu-ray 3D disc which
contains separate views for the left and right eyes.
Playing a disc
Preparation
erot
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
1. Press B(OPEN/CLOSE), and place a disc on the
disc tray.
Check your TV is 3D capable and has HDMI
input(s).
y
y
y
y
2. Press B(OPEN/CLOSE) to close the disc tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
Wear 3D glasses to enjoy the 3D experience
if it is necessary.
3. Press HOME ( ) and then select [Smart Share].
4. Select disc icon.
Check whether the BD-ROM title is the Blu-
ray 3D disc or not.
Connect an HDMI cable (Type A, High
Speed HDMI™ Cable) between the player’s
HDMI output and TV’s HDMI input.
Note
,
Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
y
y
4
1. Press HOME ( ), and set the [3D Mode] option
on the [Settings] menu to [On] (page 28).
Depending on the BD-ROM titles, an USB
device connection may be needed for the
proper playback.
2. Press B(OPEN/CLOSE), and place a disc on the
disc tray.
3. Press B(OPEN/CLOSE) to close the disc tray.
Unfinalized DVD-VR format discs may not
be played in this player.
y
y
The playback starts automatically.
4. Refer to the owner’s manual of your 3D-ready
TV for the further instruction.
Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
Caution
Watching a 3D content for a long period
time may cause dizziness or tiredness.
>
y
y
It is not recommended to watch a video
in 3D mode for infirm, child and pregnant
woman.
If you are experiencing headache, tiredness
or dizziness while viewing content in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Operating
Notes on USB device
Playing a file on disc/USB
device
yui
This player can play video, audio and photo files
contained in the disc or USB device.
This player supports USB flash drive/external
HDD formatted in FAT32 and NTFS when
accessing files (music, photo, movie). However,
for BD-Live, use the USB flash drive / external
HDD formatted in FAT32.
y
This unit can support up to 4 partitions of the
USB device.
y
y
y
1. Insert a data disc on the tray or connect an USB
device.
Do not extract the USB device during operation
(play, etc.).
An USB device which requires additional
program installation when you have connected
it to a computer, is not supported.
USB device: USB device that supports USB1.1
and USB2.0.
y
y
Video, audio and photo files can be played. For
details of operations on each file, refer to relevant
pages.
When you connect the USB device on the HOME
menu, the player plays an audio file contained in
the USB storage device automatically. If the USB
storage device is containing various types of files, a
menu for the file type selection will appear.
Regular back up is recommended to prevent
data loss.
y
y
4
If you use an USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
File loading may takes few minutes depending on
the number of content stored in the USB storage
device. Press ENTER (b) while [Cancel] is selected
to stop loading.
Some USB device may not work with this unit.
y
y
Digital camera and mobile phone are not
supported.
2. Press HOME ( ).
USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
y
3. Select [Smart Share] and press ENTER (b).
4. Select the desired linked device in the category.
5. Select [Movie], [Photo] or [Music].
6. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 37
Note
,
Playing a file on a network
server
yui
This player can play video, audio and photo files
located in a DLNA server through your home
network.
The file requirements are described on page
y
y
Thumbnails of files with unsupported
format will be displayed, but cannot be
played on this unit.
The subtitle file name and video file name
have to be the same and located at the
same folder.
y
1. Check the network connection and settings
The playback and operating quality may be
affected by your home network condition.
y
y
y
2. Press HOME ( ).
3. Select [Smart Share] and press ENTER (b).
You may experience connection problems
depending on your server’s environment.
To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC.
4. Select a DLNA media server in the category.
5. Select [Movie], [Photo] or [Music].
4
6. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 Operating
MAC OS X
1. Start up your computer, and insert the supplied
CD-ROM disc into your computer’s CD-ROM
drive.
Using Home Network
Server for PC
2. Browse the CD-ROM drive and open the
“MediaHome_4_Essentials_MAC”folder.
DLNA stands for Digital Living Network Alliance,
which allows users to access video, photo and
audio files stored in server and enjoy them on TV
via home networking.
3. Double-click the“Nero MediaHome.dmg”image
file. The Nero MediaHome window is opened.
Before connecting to PC to play a file , Nero
MediaHome 4 Essentials program should be
installed on your PC.
4. In the Nero MediaHome window, drag the Nero
MediaHome icon either to the Applications
folder within the window or to any other
desired location.
Installing Nero MediaHome 4
Essentials
5. You can now start the application by double-
clicking the Nero MediaHome icon in the
location you dragged it to.
Windows
Sharing files and folders
On your computer, you must share the folder
containing video, audio and/or photo content to
play them on this unit.
Start up your computer, and insert the supplied CD-
ROM disc into your computer’s CD-ROM drive. An
installation wizard will walk you through the quick
and uncomplicated installation process. To install
Nero MediaHome 4 Essentials, proceed as follows:
4
This parts explains the procedure for selecting the
shared folders on your computer.
1. Close all Microsoft Windows programs and exit
any anti-virus software that may be running.
1. Double-click the“Nero MediaHome 4 Essentials”
icon.
2. Insert the supplied CD-ROM disc into your
computer’s CD-ROM drive.
2. Click [Network] icon on the left and define your
network name in the [Network name] field. The
Network name you enter will be recognized by
your player.
3. Click [Nero MediaHome 4 Essentials].
4. Click [Run] to start installation.
5. Click [Nero MediaHome 4 Essentials]. The
installation is prepared and the installation
wizard appears.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares] screen.
6. Click the [Next] button to display the serial
number input screen. Click [Next] to go to the
next step.
5. Click [Add] icon to open the [Browse Folder]
window.
6. Select the folder containing the files you want
to share. The selected folder is added to the list
of shared folders.
7. If you accept all conditions, click [I accept
the License Conditions] check box and click
[Next]. Installation is not possible without this
agreement.
7. Click [Start Server] icon to start the server.
8. Click [Typical] and click [Next]. The installation
process is started.
Note
,
If the shared folders or files are not displayed
on the player, click the folder on the [Local
Folders] tab and click [Rescan Folder] at the
[More] button.
y
y
9. If you want to take part in the anonymous
collection of data, select the check box and click
the [Next] button.
10. Click the [Exit] button to complete the
installation.
and software tools.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 39
About Nero MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for
sharing video, audio and photo files stored on your
computer to this unit as a DLNA-compatible digital
media server.
System requirements
Windows PC
Windows® XP (Service Pack 2 or higher), Windows
Vista® (no Service Pack required), Windows® 7
(no Service Pack required), Windows® XP Media
Center Edition 2005 (Service Pack 2 or higher),
Windows Server® 2003
y
Note
,
The Nero MediaHome 4 Essentials CD-
ROM is designed for PCs and should not
be inserted in this player or in any product
other than a PC.
y
y
y
y
Windows Vista® 64-bit edition (application runs
in 32-bit mode)
y
y
y
Windows® 7 64-bit edition (application runs in
32-bit mode)
The supplied Nero MediaHome 4 Essentials
CD-ROM is a customized software edition
only for sharing files and folders to this
player.
Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome stand-
alone
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
y
The supplied Nero MediaHome 4 Essentials
software does not support following
functions: Transcoding, Remote UI, TV
control, Internet services and Apple iTunes.
Memory: 256 MB RAM
y
y
Graphics card with at least 32 MB video memory,
minimum resolution of 800 x 600 pixels, and 16-
bit color settings
4
The supplied Nero MediaHome 4 Essentials
software can be downloaded at
Windows® Internet Explorer® 6.0 or higher
DirectX® 9.0c revision 30 (August 2006) or higher
Network environment: 100 Mb Ethernet, WLAN
y
y
y
-
download.php?id=nmhlgewin
-
download.php?id=nmhlgemac
Macintosh
This manual explains operations with
the English version of Nero MediaHome
4 Essentials as examples. Follow the
explanation referring to the actual
operations of your language version.
y
Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard)
y
y
y
Macintosh computer with an Intel x86 processor
Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome stand-
alone
Memory: 256 MB RAM
y
Download from Www.Somanuals.com. All Manuals Search And Download.
40 Operating
Basic operations for photo
content
General Playback
To play a slide show
Press d(PLAY) to start slide show.
Basic operations for video and
audio content
To stop a slide show
Press Z(STOP) while slide show.
To stop playback
Press Z(STOP) during playback.
To pause a slide show
Press M(PAUSE) while slide show.
Press d(PLAY) to re-start the slide show.
To pause playback
Press M(PAUSE) during playback.
Press d(PLAY) to resume playback.
To skip to the next/previous photo
While viewing a photo in full screen, press Aor D
to go to the previous or next photo.
To play frame-by-frame (Video)
Press M(PAUSE) during video playback.
Press M(PAUSE) repeatedly to play Frame-by-Frame
playback.
Using the disc menu
ero
To scan forward or backward
Press cor vto play fast forward or fast reverse
during playback.
To display the disc menu
You can change the various playback speeds by
pressing cor vrepeatedly.
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu during playback, press
DISC MENU.
To slow down the playing speed
While the playback is paused, press vrepeatedly
to play various speeds of slow motion.
Use W/S/A/Dbuttons to navigate through
menu items.
To skip to the next/previous
chapter/track/file
During playback, press Cor Vto go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears during playback.
Press TITLE/POPUP during playback, and use W/
S/A/Dbuttons to navigate through menu
items.
Press Ctwice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have
many types of content in a folder together. In this
case, press Cor Vto go to the previous or
next content with same type.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 41
Resume playback
Last scene memory
eroyt
u
er
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
The unit records the point where you pressed the
Z(STOP) depending on the disc.
If“MZ(Resume Stop)”appears on the screen briefly,
press d(PLAY) to resume playback (from the scene
point).
If you press Z(STOP) twice or unload the disc,
“Z(Complete Stop)”appears on the screen. The unit
will clear the stopped point.
Note
,
Last Scene Memory function for a previous
disc is erased once a different disc is played.
y
y
y
y
This function may not work depending on
the disc.
Note
,
The resume point may be cleared when a
button is pressed (for example; 1(POWER),
B(OPEN/CLOSE), etc).
y
On BD-ROM discs with BD-J, the last scene
memory function does not work.
This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
On BD-ROM discs with BD-J, the resume
playback function does not work.
y
y
If you press Z(STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
42 Operating
Displaying content information
on-screen
eroy
1. During playback, press INFO/MENU (m).
On-Screen Display
You can display and adjust various information and
settings about the content.
2. Select an [Option] using A/D, and press
To control video playback
ENTER (b).
eroy
You can control playback and set options while
watching videos.
During playback, press INFO/MENU (m).
4
a Progress bar - Displays the current position
and total playing time.
a Title – Current title number/total number of
b [Disc Menu] - Accesses menu on a disc.
titles
c [Title/Popup] - Displays the DVD title menu
b Chapter – Current chapter number/total
or BD-ROM’s pop-up menu, if available.
number of chapters
d [Option] - Displays playback information.
c Time – Elapsed playing time/total playback
e [Music ID] - When connected to the network,
can provide information about the current
song during video playback.
time
d Audio – Selected audio language or channel
e Subtitle – Selected subtitle.
f [Repeat] - Repeats a desired section or
f Angle – Selected angle/total number of
sequence. (page 44)
angles
g TV Aspect Ratio – Selected TV aspect ratio
h Picture Mode – Selected picture mode
i Movie Information – Select this option and
press ENTER (b) to display movie information
from Gracenote Media Database (BD-ROM/
DVD only).
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 43
Note
,
Setting the slide show option
You can use various options during viewing a
photo in full screen.
If no button is pressed for a few seconds,
the on-screen display disappears.
y
y
y
y
A title number cannot be selected on some
discs.
1. While viewing pictures, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
Available items may differ depending on
discs or titles.
ENTER (b)
If an interactive Blu-ray Disc is playing back,
some setting information is displayed on
the screen but prohibited to be changed.
To use the [Movie Information] option, the
player must be connected to the broadband
internet for accessing the Gracenote Media
Database.
y
y
LG is a license of Gracenote technology and
is not responsible or liable for information
from the Gracenote Media Database
a [Speed] - Use A/Dto select a delaying
speed between photos in a slide show.
4
b [Effect] - Use A/Dto select a transition
To control photo view
Controls playback and sets options while viewing
pictures in full screen.
effect between photos in a slide show.
c [Music Select] – Select the background music
for the slide show (page 48).
You can control playback and set options while
viewing pictures in full screen.
While viewing pictures, press INFO/MENU (m).
a [Slideshow] - Starts or pause slide show.
b [Music] - Select the background music for the
slide show (page 48).
c [Option] - Displays slide show options.
d [Rotate] - Rotates the photo clockwise.
e [Zoom] - Displays the [Zoom] menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 Operating
Repeating a specific portion
eroty
This player can repeat a portion you have selected.
Advanced Playback
Repeat playback
1. During playback, press REPEAT (h) to select
[A-B] and press ENTER (b) at the beginning of
the portion you wish to repeat.
erotu
y
2. Press ENTER (b) at the end of the portion. Your
Blu-ray Disc / DVD / Video files
selected portion will be repeated continually.
During playback, press REPEAT (h) to select a
3. To return to normal playback, press CLEAR.
desired repeat mode.
Note
,
A-B – Selected portion will be repeated continually.
You cannot select a portion less than 3
seconds.
y
y
Chapter – The current chapter will be played back
repeatedly.
This function may not work on some disc or
title.
Title – The current title will be played back
repeatedly.
All – All the titles or files will be played back
repeatedly.
Playing from selected time
eroy
1. During playback, press INFO/MENU (m).
Off – Returns to normal playback.
To return to normal playback, press CLEAR.
Audio CDs/Audio files
4
2. Select an [Option] using A/D, and press
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
ENTER (b)
3. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
– Selected portion will be repeated continually.
(Audio CD only)
Track– The current track or file will be played
back repeatedly.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter“21020”.
All – All the tracks or files will be played back
repeatedly.
Press A/Dto skip the playback 60 seconds
forward or backward.
All – All the tracks or files will be played
back repeatedly in random order.
4. Press ENTER (b) to start playback from selected
time.
– The tracks or files will be played back in
random order.
Note
,
This function may not work on some disc or
titles.
y
y
To return to normal playback, press CLEAR.
This function may not work depending on
the file type and ability of the DLNA server.
Note
,
This function may not work on some disc or
title.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 45
Selecting a subtitle language
eroy
1. During playback, press INFO/MENU (m).
Watching from a different
angle
er
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
2. Select an [Option] using A/D, and press
ENTER (b)
3. Use W/Sto select the [Subtitle] option.
1. During playback, press INFO/MENU (m).
4. Use A/Dto select desired subtitle language.
2. Select an [Option] using A/D, and press
By pressing ENTER (b), you can set various
subtitle options.
ENTER (b)
3. Use W/Sto select the [Angle] option.
4. Use A/Dto select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Note
,
5. Press BACK (1) to exit the On-Screen display.
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
4
Hearing a different audio
eroy
1. During playback, press INFO/MENU (m).
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
3. Use W/Sto select the [TV Aspect Ratio]
2. Select an [Option] using A/D, and press
option.
ENTER (b)
4. Use A/Dto select desired option.
3. Use W/Sto select the [Audio] option.
5. Press BACK (1) to exit the On-Screen display.
4. Use A/Dto select desired audio language,
Note
audio track or audio channel.
,
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
Note
,
Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POPUP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
y
Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
y
y
On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
Download from Www.Somanuals.com. All Manuals Search And Download.
46 Operating
Setting the [User setting] option
1. During playback, press INFO/MENU (m).
Changing Subtitle Code Page
y
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
2. Select an [Option] using A/D, and press
ENTER (b)
4. Use W/Sto select the [Picture Mode] option.
5. Use A/Dto select the [User setting] option,
1. During playback, press INFO/MENU (m).
and press ENTER (b).
2. Select an [Option] using A/D, and press
ENTER (b)
3. Use W/Sto select the [Code Page] option.
4. Use A/Dto select desired code option.
6. Use W/S/A/Dto adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
4
7. Use W/S/A/Dto select the [Close] option,
and press ENTER (b) to finish setting.
5. Press BACK (1) to exit the On-Screen display.
Viewing content information
Changing the Picture Mode
eroy
You can change the [Picture mode] option during
playback.
y
The player can display the content information.
1. Select a file using W/S/A/D.
2. Press INFO/MENU (m) to display the option
1. During playback, press INFO/MENU (m).
menu.
2. Select an [Option] using A/D, and press
The file information appears on the screen.
ENTER (b)
During video playback, you can display the file
information by pressing TITLE/POPUP.
3. Use W/Sto select the [Picture Mode] option.
4. Use A/Dto select desired option.
Note
,
5. Press BACK (1) to exit the On-Screen display.
The information displayed on the screen
may not correct comparing actual content
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 47
Changing content list view
Selecting a subtitle file
yui
y
On the [Smart Share] menu, you can change the
content list view.
If the subtitle file name is different from the video
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
Press red (R) colored button repeatedly.
1. Use W/S/A/Dto select the subtitle file you
wish to play in the [Movie] menu.
2. Press ENTER (b).
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the video file.
4
Note
,
If you press Z(STOP) during playback, the
y
y
subtitle selection is cancelled.
This function is not available for playing file
on a server via home network.
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Operating
Listening to music during slide Setting the [3D] option
show
i
y
This function allows you to play 3D content in case
of file encorded in 3D.
You can display photo files while listening to audio
files.
1. During playback, press INFO/MENU (m).
2. Select [3D] using A/D, and press ENTER (b)
3. Use W/S/A/Dto select desired options.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an [Option] using A/D, and press
You can adjust 3D’s depth and distance on the
[3D Setting] option.
ENTER (b).
3. Use W/Sto select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
On [3D Setting], select [Init] option then press
ENTER (b) to reset the all adjustments.
4. Use W/Sto select a device, and press ENTER
(b).
Available device may differ depending on the
location of the current photo file.
Photo location
Disc, USB
Available Device
Disc, USB
4
DLNA server
DLNA server
5. Use W/Sto select a file or a folder you wish to
play.
Select gand press ENTER (b) to display the
upper directory.
Note
,
When selecting audio file from a server, folder
selection is not available. Only file selection is
available.
6. Use Dto select [OK], and press ENTER (b) to
complete music selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 49
To select a server from the device list, files or
folders must be shared by DLNA server from the
connected Wi-Fi Direct™ device.
Advanced Features
6. Select [Movie], [Photo] or [Music] using W/S/
Wi-Fi Direct™
A/D, and press ENTER (b).
Connecting to a Wi-Fi Direct™
certified device
yui
This player can play movie, music and photo files
located in a Wi-Fi Direct™ certified device. The Wi-Fi
Direct™ technology make the player to be directely
connected to a Wi-Fi Direct™ certified device
without connecting to a network device such as an
access point.
7. Select a file using W/S/A/D, and press
ENTER (b) to play the file.
On Wi-Fi Direct™ certified device
Note
,
1. Turn on the Wi-Fi Direct™ certified device and
run its Wi-Fi Direct function.
For the purpose of the better transmission,
placing the player from the Wi-Fi Direct™
certified server as close as possible.
y
2. Run DLNA application on the device.
4
This unit can connect only 1 device at a
time. Multiple connection is not available.
y
y
On your player
3. Select [NETWORK] option in the [Settings]
If you try to connect wireless network while
a device is connected by Wi-Fi Direct™
function , Wi-Fi Direct™ connection will be
force disconnected.
menu then press ENTER (b).
4. Select [Wi-Fi Direct] option, and press ENTER
(b).
If this player and a Wi-Fi Direct™ device
are connected to the different local area
network, Wi-Fi Direct™ connection may not
available.
y
If a Wi-Fi Direct™ certified device is not in
Wi-Fi direct standby mode, this product
cannot find the device.
y
y
y
When you connect a Wi-Fi Direct™
certified device to your player, PIN network
connection is not supported.
5. Select a Wi-Fi Direct™ device on the list using
W/S, and press ENTER (b).
This product cannot connect to a Wi-Fi
direct™ device which is in Group Owner
mode.
Wi-Fi Direct™ connection will be proceeded.
follow the procedure on the screen.
If you want to rescan available Wi-Fi Direct™
device, Select the [Refresh List] and press ENTER
(b).
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Operating
Enjoying BD-Live™
e
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers
by connecting this unit to the internet.
LG AV Remote
You can control this player with your iPhone
or Android phone via your home network. This
player and your phone must be connected to your
wireless network device such as access point. Visit
“Apple iTunes”or“Google Android Market (Google
Play Store)”for detailed information of“LG AV
Remote”.
1. Check the network connection and settings
2. Insert an USB storage device to the USB port on
the front panel.
Private Sound Mode
By downloading“LG AV Remote”application on
your smart phone or tablet, you can connect your
headsets, and enjoy the sound from your player on
your smart devices.
An USB storage device is needed to download
bonus content.
3. Press HOME ( ), and set the [BD-LIVE
connection] option on the [Settings] menu
This feature transmits video signal to TV through
HDMI and audio signal to smart phone or tablet
through Wi-Fi. For more detailed information,
please refer to the Help menu on“LG AV Remote”
application.
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option
is set to [Partially Permitted].
4
4. Insert a BD-ROM with BD-Live.
The operations may differ depending on the
disc. Refer to the manual supplied with the disc.
Caution
>
Do not extract the connected USB device
while content is being downloaded or a Blu-
ray disc is still in the disc tray. Doing so may
damage the connected USB device and BD-
Live features may not operate properly with
the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
Note
,
Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
y
It may take up to several minutes to load
and start enjoying BD-Live content.
y
y
For BD-Live, use the USB flash drive /
external HDD formatted in FAT32 only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 51
Note
,
Viewing information from
Gracenote Media Database
The player can access the Gracenote Media
Database and load the music information so that
Track name, Artist Name, Genre and other text
information can be displayed on the list.
The player must be connected to the
broadband internet for accessing the
Gracenote Media Database.
y
y
y
y
If the music information is not in the
Gracenote Media Database, message
appears on the screen.
Depending on the cases, it will takes a few
minutes to load music information from the
Gracenote Media Database.
Audio CD
When you insert an Audio CD, the player starts
playback automatically and loads the music title
from the Gracenote Media Database.
Information may be displayed in broken
letters, if the language you selected is not
available on the Gracenote Media Database.
If there is no music information from the database,
music titles will not appear on the screen.
This function is not available for on-line
content and content in DLNA servers.
y
y
Music file
LG is a license of Gracenote technology and
is not responsible or liable for information
from the Gracenote Media Database.
Select a music file using W/S/A/Dand press
INFO/MENU (m) or MUSIC ID.
The player accesses to Gracenote Media Database
for the music information.
Audio CDs that users made for their only
private purposes cannot be supported in
this feature because they are not in the
Gracenote Media Database.
y
y
4
Blu-ray Disc/DVD/Movie file
1. While listening to a music from the movie being
Supported music file extensions :
mp3, wma, m4a, wav
played, press INFO/MENU (m).
2. Select a [Music ID] using A/D, and press
ENTER (b).
The player starts loading the music information
from the Gracenote Media Database.
Note
,
You can also start loading the music
information directly by pressing MUSIC ID.
Download from Www.Somanuals.com. All Manuals Search And Download.
52 Operating
Note
,
Audio CD recording
For recording, use the USB flash drive /
external HDD formatted in FAT32 only.
y
y
You can record one desired track or all of the tracks
in Audio CD to an USB storage device.
Audio track is recorded to an audio file with
192 kbps. FM radio and AUX source are
recorded to an audio file with 128 kbps.
1. Insert an USB storage device to the USB port on
the front panel.
2. Insert an Audio CD into the player.
The playback starts automatically.
Audio CD recording times in the table
above are approximate.
y
y
3. Press (X) REC button to start [CD Recording].
Actual recording time for USB storage
device varies depending on the USB storage
device’s ability.
During
Stop mode
playback
Make sure that there is minimum of 50 MB
free space is needed when recording into
the USB storage device.
y
y
y
Recording
track
All of the tracks
4X speed
playing track
Recording
time
normal
speed.
The length of the recording source should
be longer than 20 seconds for the proper
recording.
Recording from FM radio or
AUX/ PORTABLE source
You can record from FM radio or AUX/ PORTABLE
source to an USB storage device.
Do not turn off this player or extract the
connected USB storage device during the
recording.
4
Caution
The recording or copying features on this
player are provided for your personal and
non-commercial use. The making of
unauthorized copies of copy-protected
material, including computer programs, files,
broadcasts and sound recordings, may be an
infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes. LG expressly disclaims
any responsibility for illegal distribution or
use of unauthorized content in commercial
purpose.
1. Insert an USB storage device to the USB port on
the front panel.
>
2. In FM radio mode, tune to the desired radio
or in AUX/ PORTABLE mode, start playback from
the external source.
3. Press (X) REC button on the remote control.
-
The recording is saved as a file“EXT_REC”
folder.
Be Responsible
Respect Copyrights
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 53
Deleting a saved station
Radio Operations
Be sure that the antennas are connected.
(Refer to the page 17)
1. Press PRESET (- / +) to select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again, to delete the selected preset
number.
Listening to the radio
1. Press FUNCTION until TUNER (FM) appears in
the display window. The last received station is
tuned in.
Deleting all the saved stations
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change. Scanning stops when the unit tunes in
a station. Or Press TUNING (-/+) repeatedly.
Press and hold CLEAR for two seconds.
“ERASE ALL”will flash up. Press CLEAR again. Then all
the saved stations are deleted.
3. Adjust the volume by pressing VOL (+/-).
Improving poor FM reception
Press B (blue) (MONO/STEREO) colored button on
the remote control. This will change the tuner from
stereo to mono and usually improve the reception.
Presetting the radio stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
4
1. Press FUNCTION until the TUNER (FM) appears
in the display window.
2. Select the desired frequency by using TUNING
(-/+).
3. Press ENTER (b) a preset number will flash in
the display window.
4. Press PRESET (-/+) to select the preset number
you want.
5. Press ENTER (b). The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Download from Www.Somanuals.com. All Manuals Search And Download.
54 Operating
Playing the iPod
You can enjoy the sound with your iPod. For details
about iPod, refer to the iPod’s User Guide.
Preparation
Before connecting the iPod, turn this unit off and
reduce the volume of this unit to its minimum.
Press REPEAT (h) to select a desired repeat
mode :Track (;), All (:), Shuffle All (l:),
Shuffle (l), Off (No display)
Note
Note
,
,
Use the iPod cable supplied with your iPod.
If the iPod’s OSD language is selected to
simple chinese, the power scroll function is not
operated correctly.
1. Connect the iPod to the USB port on the front
panel.
If you turn this unit on, your iPod is
automatically turned on and recharging starts.
Enjoying the iPod IN mode
When you connect the iPod on the HOME
menu, the player plays a music automatically.
You can operate your iPod by using the supplied
remote control and controls on your iPod.
2. Select a file using W/S/A/D, and press
4
1. Connect the iPod to the USB port on the front
panel.
ENTER (b) to play the file.
If you turn this unit on, your iPod is
automatically turned on and recharging starts.
Enjoying iPod on the screen
2. Press FUNCTION to select iPod in mode.
1. Connect the iPod to the USB port on the front
panel.
W/S/A/D Selects an option in the menu.
2. Press HOME ( ).
ENTER (b)
Starts playback the music.
3. Select [Smart Share] using A/D, and press
ENTER (b).
To pause while it is playing. To
resume playing, press Mor d
(PLAY) again.
If a disc is already inserted, select the iPod on
the menu.
Mor d(PLAY)
4. Select a file using W/S/A/D, and press
(Press and hold)
c/v
ENTER (b) to play.
Fast-forward or rewind a song
Skip the playback forward or
backward .
Power scroll
C/V
You can search easily a content by power scroll
on the screen.
Select a power scroll using Dand select the
initial of the desired content.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 55
Note
,
An error message“CHECK”or“Connected
y
y
iPod model is not supported.”appears when:
-
your iPod is not available for the function
to be operated.
An error message“CHECK”or“Please update
your iPod’s software.”appears when:
-
your iPod has an old software version.
/Update your iPod software to latest
version.
If this unit displays an error message, follow
the message. An error message“CHECK”or
“Please check your iPod.”appears when:
y
-
the communication between this unit
and your iPod is failed.
/Connect & reconnect your iPod in this
unit.
-
-
your iPod is not connected firmly.
this unit recognises your iPod as
unknown device.
Your iPod is exceptionally low on power.
/The battery needs to be charged.
/If you charge the battery while iPod
is extremely low in power, it may take
longer to charge.
y
4
Compatibility with your iPod may vary
depending on the type of your iPod.
y
y
iPod touch, iPhone and iPad have any
difference in operation other than iPod.
You may need any additional control to use
them with this unit. (e.g. “slide to unlock”)
If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch, iPhone or iPad, disconnect it
from to the USB port of this unit and then
use it.
y
Depending on your iPod’s software version,
it may not be possible to control your iPod
from this unit. We recommend installing the
latest software version.
y
y
This unit supports the models as follows.
- iPad mini
- iPad nano 4G, 5G, 6G
- iPod touch 1G, 3G, 4G, 5G, 7G
- iPhone 3G, 3GS, 4, 4S, 5
- iPad, iPad2, New iPad, iPad4
If you have a problem with your iPod, please
y
Download from Www.Somanuals.com. All Manuals Search And Download.
56 Operating
Listening to music stored on
the Bluetooth devices
Using Bluetooth
technology
Pairing your unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters.
(The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.)
Connecting individual devices under
Bluetooth® wireless technology does not incur any
charges. A mobile phone with
Bluetooth® wireless technology can be operated
via the Cascade if the connection was made via
Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA (This units be supported the Stereo Headset.)
1. Select the Bluetooth function by using the
FUNCTION.
Appears“BT READY”in display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit appears as“LG HTS”.
4
3. When this unit successfully paired with your
Bluetooth device, Bluetooth LED of this unit
lights up and“BTPAIRED”appears in the display
window.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
Note
,
A2DP (Advanced Audio Distribution Profile)
Depending on the Bluetooth device type,
some device have a different pairing way.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
Note
,
If you change the function of the unit, the
Bluetooth function is disconnected, operate
pairing again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 57
Note
,
The sound may be interrupted when
the connection interfered by the other
electronic wave.
y
You cannot control the Bluetooth device
with this unit.
y
y
y
Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
Although the distance between your
Bluetooth and the set is less than 10m, there
are obstacles between both, your Bluetooth
device cannot be connected.
Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y
When not connected the Bluetooth, “BT
READY”appears on the display window.
y
y
The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
4
When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
y
y
If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower the connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
The device with Bluetooth wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10m.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
58 Operating
Using the Premium
You can use various content services via Internet
with the Premium feature.
Using the LG Smart
World
You can use the LG application services on
this player via Internet. You can easily find and
download various applications from LG Smart
World.
1. Check the network connection and settings
2. Press HOME ( ).
3. Select the [Premium] using A/D, and press
1. Check the network connection and settings
ENTER (b).
2. Press HOME ( ).
3. Select the [LG Smart World], and press ENTER
(b).
4. Select an online service using W/S/A/D,
and press ENTER (b).
Note
,
4. Select a category using A/D, and press ENTER
For detailed information of each service,
contact to the content provider or visit
support link of the service.
y
y
4
(b).
5. Use W/S/A/Dto select an application, and
press ENTER (b) to display the information.
The content of Premium services and
service related information, including user
interface, is subject to changes. Please refer
to the web site of each service for most up-
to-date information.
6. Press ENTER (b) while [Install] icon is
highlighted. The application will be installed to
the player.
To install an application to the player, user
information of signning in.
Using Premium features with wireless
network connection may result in improper
streaming speed by interference from
household devices that are using radio
frequencies.
y
y
7. Press yellow (Y) colored button to display the
[My Apps] screen.
8. Select the installed application and press ENTER
For the first time to access [Premium] or
[LG Smart World] feature, current country
setting appears. If you want to change
the country setting, select [Edit] and press
ENTER (b).
(b) to excute it.
Note
,
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
y
y
To install a paid application, you need to be
more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 59
Signing in
Searching online content
To use the [LG Smart World] feature, you need to
sign in with your account.
If you are having difficulties finding specific content
from online services, you can use the all-in-one
search function by entering keywords in the
[Search] menu.
1. On the [LG Smart World] or [My Apps] screen,
press red (R) colored button.
1. Press HOME ( ).
2. Fill the [ID] and [Password] field using the virtual
keyboard.
2. Select the [Search] icon on the home menu
using W/S/A/D, and press ENTER (b).
If you do not have an account, press red (R)
colored button to register.
The [Search] menu appears on the screen with
virtual keyboard.
3. Use W/S/A/Dto select [OK], and press
ENTER (b) to sign in with your account.
3. Use
W/S/A/D
to select letters then press
ENTER (b) to confirm your selection on the
virtual keyboard.
If you select the [Auto Sign In] check box,
your ID and password are remembered and
automatically signed in without entering them.
4. When you finish entering the keyword, select
[OK] and press ENTER (b) to display search
result.
Note
,
If you want to sign in with other account,
press red (R) colored button on [LG Smart
World] or [My Apps] screen, and select
[Change User] option.
y
y
5. Use W/S/A/Dto select a desired content,
and press ENTER (b) to move to the selected
content directly.
4
Note
To view the information of your account and
applications, press red (R) colored button on
[LG Apps] or [My Apps] screen, and select
[Account Setting] option.
,
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
y
y
The [Search] function does not search
content in every online services. It works
only in certain online services.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 Operating
Using the My Apps
Menu
You can move or delete an installed application in
the [My Apps] menu.
1. Press HOME ( ).
2. Select the [My Apps], and press ENTER (b).
Move an application
1. Select an application, and press green (G)
colored button to display the options.
2. Use W/Sto select [Move], and press ENTER
(b).
4
3. Use W/S/A/Dto select a position you want
to move to, and press ENTER (b).
Delete an application
1. Select an application, and press green (G)
colored button to display the options.
2. Use W/Sto select [Delete], and press
ENTER(b).
3. Use A/Dto select [Yes], and press ENTER (b)
to confirm.
Note
,
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 61
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turned on.
Plug the power cord into the wall outlet securely.
y
The unit does not start
playback.
Insert a playable disc. (Check the disc type, color system, and regional
code.)
y
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
y
y
y
y
Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
y
y
y
y
If you use an USB extension cable or USB HUB, the USB devices may
not be recognized.
An USB device which requires additional program installation when
you have connected it to a computer is not supported.
This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
5
The angle cannot be changed.
Multi-angles are not recorded on the DVD Video being played.
y
Cannot play video, photo or
audio files.
The files are not recorded in a format that the unit can play.
The unit does not support the codec of the video file.
y
y
The remote control does not
work properly.
The remote control is not pointed at the remote sensor of the unit.
The remote control is too far from the unit.
y
y
y
y
There is an obstacle in the path of the remote control and the unit.
The batteries in the remote control are exhausted.
The unit is plugged in, but the You can reset the unit as follows.
power will not turn on or off.
Unplug the power cord, wait at least five seconds, and then plug it in
y
again.
The unit is not operating
normally.
Download from Www.Somanuals.com. All Manuals Search And Download.
62 Troubleshooting
Network
Symptom
Cause & Solution
BD-Live feature does not work.
The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
y
y
y
Ensure that the unit is correctly connected to the local area network
and can access the internet (page 19).
Your broadband speed may not fast enough to use the BD-Live
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
The [BD-LIVE connection] option in the [Settings] menu is set to
[Prohibited]. Set the option to [Permitted].
y
y
Streaming video services (such
as YouTube™, etc.) are often
stopped or“buffer”during
playback.
Your broadband service speed may not be fast enough to stream
video services. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
Media servers are not displayed
on the device list.
The firewall or anti-virus software on your media server is running.
Turn off the firewall or anti-virus software running on your media
server.
y
The player is not connected to the local area network that your media
server is connected.
y
y
Cannot connect the player to
the access point or wireless
LAN router.
The wireless communication may be interrupted from household
devices that are using radio frequencies. Move the player away from
them.
5
Access point is not displayed
on the“Access point name”list.
The access point or wireless LAN router may not broadcast its SSID.
Set your access point to broadcast its SSID through your computer.
y
y
Your network device such as access point may not set with available
frequency range and channel that this player can support.
Try setting the frequency range and channel on the network device
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 63
Picture
Symptom
Cause & Solution
There is no picture.
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
y
Connect the video connection securely.
y
y
Check the [HDMI Color Setting] in the [Settings] menu is set to the
appropriate item that conforms to your video connection.
Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
y
y
The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears
You are playing a disc recorded in a colour system that is different
from your TV.
y
Set the resolution which your TV accepts.
y
y
Blu-ray 3D disc playback does
not output 3D views.
Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable).
Your TV may not support“HDMI 3D mandatory format”.
y
y
The [3D Mode] option in the [Settings] menu is set to [Off].
Set the option to [On].
Sound
5
Symptom
Cause & Solution
There is no sound or the sound
is distorted.
The unit is in scan, slow motion, or pause mode.
The sound volume is low.
y
y
y
Check the speaker cable connection. (page 13)
Customer Support
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
Open Source Software Notice
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit
available to download with the source code.
Download from Www.Somanuals.com. All Manuals Search And Download.
64 Appendix
Setting up the remote to
control your TV
Controlling a TV with
the Supplied Remote
Control
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
You can control your TV using the buttons below.
1. While holding down 1(TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons (see the table below).
Manufacturer
LG
Code number
1(Default), 2
Zenith
1, 3, 4
1, 2
6, 7
8, 9
4
GoldStar
Samsung
Sony
By pressing
You can
1(TV POWER)
Turn the TV on or off.
Switch the TV’s input source
between the TV and other
input sources.
Hitachi
AV/INPUT
2. Release the 1(TV POWER) button to complete
setting.
Scan up or down through
memorized channels.
PR/CH W/S
VOL +/–
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Adjust the volume of the TV.
Turn the TV’s volume on or
off.
MUTE
Note
,
6
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 65
Software update
Network Software
Update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
Network update notification
Note
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
,
Before updating the software in your player,
remove any disc and USB Device from the
player.
y
Before updating the software in your player,
turn the player off and then turn it back on.
y
y
During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
Option 1:
1. The update menu will appear on the screen
when you turn off the player.
If you cancel the update, turn off the power
and turn it on for stable performance.
y
y
2. Use A/Dto select a desired option and then
This unit cannot be updated to previous
software version.
press ENTER (b).
1. Check the network connection and settings
2. Select [Software] option in the [Settings] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
[OK]
Starts the software update.
Exits the update menu and turns
the power off.
6
[Cancel]
Option 2:
The player will check for the newest update.
If the software update is available from the update
server, the“Update”icon appears in the Home
menu. Press blue (B) colored button to start the
update procedure.
Note
,
Pressing ENTER (b) while checking for the
y
y
update will end the process.
If there is no update available, the Message,
“No update is found.”appears. Press ENTER
(b) to return to the [Home Menu].
Download from Www.Somanuals.com. All Manuals Search And Download.
66 Appendix
4. If newer version exists, the message“Do you
want to download it?”appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your home
network condition)
7. When downloading is completed, the message,
“Download is complete. Do you want to
update?”appears.
8. Select [OK] to start updating. (Selecting [Cancel]
will end the update and downloaded file will
not be re-usable. To update software the next
time, the software update procedure has to be
started from the beginning again.)
Caution
>
Do not turn off the power during the software
update.
Note
,
If the software includes the driver update, disc
tray may open during the process.
9. When update is completed, the power will be
turned off automatically in a few seconds.
10. Turn the power back on. The system now
operates with the new version.
Note
6
,
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 67
Additional Information
File requirement
Video files
File
Location
File
Extension
Audio
Format
Codec Format
Subtitle
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v”(DRM
free), “.vob”, “.3gp”,
“.mov”, “.trp”, “.m2t”,
“.mpe”, “.m1v”, “.m2v”,
“.wm”, ”.flv”, “.ts”, “.dat”
XVID, MPEG1 SS, Dolby
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub
H.264/MPEG-4
AVC, MPEG2 PS,
MPEG2 TS, VC-1
SM (WMV3)
Digital,
DTS, MP3,
Disc,
USB
WMA, AAC, (.sub), SubViewer 1.0 (.sub),
AC3
SubViewer 2.0 (.sub/.txt), TMPlayer
(.txt), DVD Subtitle System (.txt)
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v”(DRM
XVID, MPEG1 SS, Dolby
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), SubViewer
H.264/MPEG-4
AVC, MPEG2 PS,
Digital,
DTS, MP3,
DLNA
free), “.mov”, “.trp”, “.m2t”, MPEG2 TS, VC-1
WMA, AAC, 1.0 (.sub), SubViewer 2.0 (.sub/.
“.mpe”, “.m1v”, “.m2v”,
”.flv”, “.ts”
SM (WMV3)
AC3
txt), TMPlayer (.txt), DVD Subtitle
System (.txt)
Audio files
File
Location
File
Extension
Sampling Frequency
Bitrate
within 32 - 192 kbps
(WMA), within 32 - 320 not supported on
kbps (MP3)
Note
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
Some wav files are
6
Disc,
USB
this player.
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free)
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320 not supported on
kbps (MP3)
Some wav files are
DLNA
this player.
Photo files
File
Location
File
Extension
Recommended
Size
Note
Disc,
USB,
DLNA
“.jpg”, “.jpeg”,
“.png”, “.gif”
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
are not supported.
Supplied bundle DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA
and WMV.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
68 Appendix
Note
Note
,
,
The file name is limited to 180 characters.
A“avi”file which is encoded“WMV 9 codec”
is not supported.
y
y
y
y
Maximum files/Folder: Less than 2000 (total
number of files and folders)
This player supports UTF-8 files even it
contains Unicode subtitle content. This
player can not support the pure Unicode
subtitle files.
Depending on the size and number of the
files, it may take several minutes to read the
content on the media.
y
Depending on the types of file or ways of
recording, it may not play back.
y
y
File compatibility may differ depending on
the server.
y
y
A disc which was recorded by multi-session
on normal PC is not supported on this
player.
Because the compatibility on DLNA server
are tested on the bundle DLNA server
(Nero MediaHome 4 Essentials Windows
edition) environment, file requirements and
playback functions may differ depending on
media servers.
To be playback a video file, video file name
and Subtitle file name must be the same.
y
y
When you play a video file with a extension
such as“.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp”or“.m2t”,
your player may not support subtitle files.
not always compatible. There may have
some restrictions by file features and media
server’s ability.
y
y
y
The total playback time of audio file
indicated on the screen may not correct for
VBR files.
y
y
Playing video subtitle files are only available
on DLNA media server created by supplied
Nero MediaHome 4 Essentials software on
this player package.
Video / Audio codec compatibility may
differ depending on video file.
The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
AVCHD (Advanced Video
Codec High Definition)
This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
This unit cannot support the ID3 Tag
embedded MP3 file.
y
y
y
The total playback time of audio file
indicated on the screen may not correct for
VBR files.
6
The AVCHD format is a high definition digital
video camera format.
y
y
HD video files contained on the CD/DVD or
USB 1.0/1.1 may not played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD video files.
y
The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. A file with
higher level may not be supported.
y
y
This player can playback AVCHD discs using
“x.v.Color”format.
y
y
This player does not support files that are
2
recorded with GMC 1 or Qpel
.
Some AVCHD format discs may not play
depending on the recording condition.
*
*
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
AVCHD format discs need to be finalized.
y
y
“x.v.Color”offers a wider color range than normal
DVD camcorder discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 69
About DLNA
Compatibility notes
This Player is a DLNA Certified digital media player
that can display and play video, photo and audio
content from your DLNA-compatible digital media
server (PC and Consumer Electronics).
Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
y
The Digital Living Network Alliance (DLNA) is a
cross-industry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing
of digital media through your home network.
This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-in-
picture function. For the playback method, refer
to the instructions in the disc.
y
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies with
DLNA Interoperability Guidelines v1.5.
Viewing high-definition content and up-
converting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
y
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software or
other devices may be required. Please refer to the
operating instructions for the software or device for
more information.
Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
y
y
Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 5.1 channels if you
use HDMI connection for the audio output of the
unit.
Certain system requirements
For high definition video playback:
High definition display that has HDMI input jack.
BD-ROM disc with high definition content.
y
y
y
You can use an USB device to store some disc
related information, including downloaded
online content. The disc you are using will
control how long this information is retained.
y
HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
70 Appendix
Audio Output Specifications
Jack/Setting
HDMI OUT
3
1
2
Source
Dolby Digital
Bit Stream
* *
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM Multi-Ch
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch
PCM 2ch
DTS Re-encode
*
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 5.1ch
PCM 5.1ch
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [Bit Stream]. (Except
LPCM Codec : the output always include
interactive and secondary audio.)
The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio
CD while playback.
y
y
With digital audio connection (HDMI OUT), Disc
Menu button sounds of BD-ROM may not be
heard if the [Digital Output] option is set to [Bit
Stream].
*2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDMI device even though
[Digital Output] option is set to [Bit Stream].
If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
y
y
y
*3 If the [Digital Output] option is set to [DTS re-
encode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like [Bit
Stream]).
Multi-channel Digital Surround Sound via
digital connection can only be obtained if your
receiver is equipped with a Digital Multi-channel
decoder.
6
This setting is not available on the input signal
from an external device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 71
Area Code List
Choose an area code from this list.
Area
Code Area
AF Fiji
Code Area
FJ Monaco
Code Area
Code
Afghanistan
Argentina
Australia
Austria
MC Singapore
SG
AR Finland
AU France
AT Germany
BE Great Britain
BT Greece
BO Greenland
BR Hong Kong
KH Hungary
CA India
FI Mongolia
FR Morocco
DE Nepal
MN Slovak Republic
MA Slovenia
NP South Africa
NL South Korea
AN Spain
SK
SI
ZA
KR
Belgium
Bhutan
GB Netherlands
GR Antilles
GL New Zealand
HK Nigeria
HU Norway
IN Oman
ES
Bolivia
NZ Sri Lanka
NG Sweden
NO Switzerland
OM Taiwan
LK
Brazil
SE
Cambodia
Canada
Chile
CH
TW
TH
TR
CL Indonesia
CN Israel
ID Pakistan
IL Panama
PK Thailand
PA Turkey
China
Colombia
Congo
CO Italy
IT Paraguay
JM Philippines
JP Poland
PY Uganda
UG
UA
US
UY
UZ
VN
ZW
CG Jamaica
CR Japan
PH Ukraine
Costa Rica
Croatia
PL United States
PT Uruguay
RO Uzbekistan
Vietnam
HR Kenya
KE Portugal
KW Romania
LY Russian
Czech Republic
Denmark
Ecuador
Egypt
CZ Kuwait
DK Libya
Federation
RU
EC Luxembourg
EG Malaysia
SV Maldives
ET Mexico
LU
Zimbabwe
Saudi Arabia
MY
SA
SN
6
Senegal
El Salvador
Ethiopia
MV
MX
Download from Www.Somanuals.com. All Manuals Search And Download.
72 Appendix
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Afar
Code Language
6565 French
6570 Frisian
Code Language
7082 Lithuanian
7089 Macedonian
7176 Malagasy
7565 Malay
Code Language
7684 Sindhi
7775 Singhalese
7771 Slovak
7783 Slovenian
7776 Spanish
7773 Sudanese
7782 Swahili
7779 Swedish
7778 Tagalog
7865 Tajik
Code
8368
8373
8375
8376
6983
8385
8387
8386
8476
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Afrikaans
Albanian
Amharic
Arabic
8381 Galician
6577 Georgian
6582 German
7289 Greek
6869 Malayalam
6976 Maori
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
6583 Greenlandic
6588 Guarani
6590 Gujarati
6665 Hausa
7576 Marathi
7178 Moldavian
7185 Mongolian
7265 Nauru
Basque
6985 Hebrew
6678 Hindi
7387 Nepali
7869 Tamil
Bengali; Bangla
Bhutani
Bihari
7273 Norwegian
7285 Oriya
7879 Telugu
7982 Thai
6890 Hungarian
6672 Icelandic
6682 Indonesian
6671 Interlingua
7789 Irish
7383 Panjabi
8065 Tonga
8083 Turkish
7065 Turkmen
8076 Twi
Breton
7378 Pashto, Pushto
7365 Persian
Bulgarian
Burmese
Byelorussian
Chinese
Croatian
Czech
7165 Polish
6669 Italian
7384 Portuguese
7465 Quechua
8084 Ukrainian
8185 Urdu
9072 Japanese
7282 Kannada
6783 Kashmiri
6865 Kazakh
7876 Kirghiz
6978 Korean
6979 Kurdish
6984 Laotian
7079 Latin
6
7578 Rhaeto-Romance 8277 Uzbek
7583 Rumanian
7575 Russian
7589 Samoan
7579 Sanskrit
7585 Scots Gaelic
7679 Serbian
7665 Serbo-Croatian
7686 Shona
8279 Vietnamese
Danish
8285 Volapük
8377 Welsh
8365 Wolof
7168 Xhosa
8382 Yiddish
8372 Yoruba
8378 Zulu
Dutch
English
Esperanto
Estonian
Faroese
Fiji
7074 Latvian, Lettish
7073 Lingala
Finnish
7678
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 73
Trademarks and
Licenses
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872 & other
U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol
together are registered trademarks & DTS-HD
Master Audio | Essential is a trademark of DTS,
Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
“DVD Logo”is a trademark of DVD Format/Logo
Licensing Corporation.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks
of the Digital Living Network Alliance.
Java is a trademark of Oracle and/or its affiliates.
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
The Wi-Fi Protected Setup Mark is a trademark of
the Wi-Fi Alliance.
6
“x.v.Color”is a trademark of Sony Corporation.
“AVCHD”and the“AVCHD”logo are trademarks of
Panasonic Corporation and Sony Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Download from Www.Somanuals.com. All Manuals Search And Download.
74 Appendix
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commercially-
produced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
“Made for iPod,”“Made for iPhone,”and“Made for
iPad”mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone,
or iPad, respectively, and has been certified
by the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
request additional information about Cinavia by
mail, send a postcard with your mailing address
to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2012
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless tech-
nology can be operated via the Cascade if the
connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 75
The Gracenote service uses a unique identifier to
track queries for statistical purposes. The purpose of
a randomly assigned numeric identifier is to allow
the Gracenote service to count queries without
knowing anything about who you are. For more
information, see the web page for the Gracenote
Privacy Policy for the Gracenote service.
Gracenote®, Gracenote logo and logotype,
and the“Powered by Gracenote”logo are
either registered trademarks or trademarks of
Gracenote, Inc. in the United States and/or other
countries.
The Gracenote Software and each item of
Gracenote Data are licensed to you“AS IS.”
Gracenote makes no representations or warranties,
express or implied, regarding the accuracy of any
Gracenote Data from in the Gracenote Servers.
Gracenote reserves the right to delete data from
the Gracenote Servers or to change data categories
for any cause that Gracenote deems sufficient. No
warranty is made that the Gracenote Software or
Gracenote Servers are error-free or that functioning
of Gracenote Software or Gracenote Servers will
be uninterrupted. Gracenote is not obligated to
provide you with new enhanced or additional data
types or categories that Gracenote may provide in
the future and is free to discontinue its services at
any time.
Music recognition technology and related data
are provided by Gracenote®.
Portions of the content is copyright © Gracenote
or its providers.
Gracenote® End User License Agreement
This application or device contains software from
Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote (the
“Gracenote Software”) enables this application to
perform disc and/or file identification and obtain
music-related information, including name, artist,
track, and title information (“Gracenote Data”) from
online servers or embedded databases (collectively,
“Gracenote Servers”) and to perform other
functions. You may use Gracenote Data only by
means of the intended End-User functions of this
application or device.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE DOES NOT
WARRANT THE RESULTS THAT WILL BE OBTAINED
BY YOUR USE OF THE GRACENOTE SOFTWARE
OR ANY GRACENOTE SERVER. IN NO CASE WILL
GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGES OR FOR ANY LOST
PROFITS OR LOST REVENUES.
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only. You
agree not to assign, copy, transfer or transmit the
Gracenote Software or any Gracenote Data to any
third party. YOU AGREE NOT TO USE OR EXPLOIT
GRACENOTE DATA, THE GRACENOTE SOFTWARE,
OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY
PERMITTED HEREIN.
6
© Gracenote, Inc. 2009
You agree that your non-exclusive license to use
the Gracenote Data, the Gracenote Software, and
Gracenote Servers will terminate if you violate
these restrictions. If your license terminates, you
agree to cease any and all use of the Gracenote
Data, the Gracenote Software, and Gracenote
Servers. Gracenote reserves all rights in Gracenote
Data, the Gracenote Software, and the Gracenote
Servers, including all ownership rights. Under no
circumstances will Gracenote become liable for
any payment to you for any information that you
provide. You agree that Gracenote, Inc. may enforce
its rights under this Agreement against you directly
in its own name.
Download from Www.Somanuals.com. All Manuals Search And Download.
76 Appendix
Specifications
General
Power requirements
Power consumption
Refer to main label
Refer to main label
Approx. 360 mm x 60.5 mm x 299 mm
(14.1 inches x 2.3 inches x 11.7 inches)
Dimensions (W x H x D)
Net Weight (Approx.)
Operating temperature
Operating humidity
2.7 kg (5.9 lbs)
5 °C to 35 °C (41 °F to 95 °F)
5 % to 90 %
Inputs/Outputs
HDMI OUT (video/audio)
ANALOG AUDIO IN
DIGITAL IN (OPTICAL)
PORT. IN
19 pin (Type A, HDMI™ Connector) x 1
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
3 V (p-p), Optical jack x 1
0.5 Vrms (3.5 mm stereo jack) x 1
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Power output (3 Ω), (RMS), THD 10 %
Total
1000 W
6
Front
167 W x 2
167 W
Center
Rear
167 W x 2
167 W (Passive)
Sub-Woofer
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 77
System
Laser
Semiconductor laser
Wavelength
405 nm / 650 nm
Signal system
Standard NTSC color TV system
20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling)
Less than 0.05 %
Frequency response
Harmonic distortion
Dynamic range
LAN port
More than 80 dB
Ethernet jack x 1, 10BASE-T / 100BASE-TX
IEEE 802.11b/g/n (2.4 GHz band)
DC 5 V 02.1 A
Wireless LAN (internal antenna)
Bus Power Supply (USB)
Speakers
Front speaker (Left/ Right)
Type
1 Way 1 speaker
Max. Input power
334 W
Net Dimensions
(W x H x D)
97 mm x 140 mm x 80 mm
(3.8 inches x 5.5 inches x 3.1 inches)
Impedance Rated 3 Ω
Input Power
167 W
Net Weight
0.5 kg (1.1 lbs)
334 W
Rear speaker (Left/ Right)
Type
1 Way 1 speaker
Max. Input power
Net Dimensions
(W x H x D)
97 mm x 140 mm x 80 mm
(3.8 inches x 5.5 inches x 3.1 inches)
Impedance Rated 3 Ω
Input Power
Center speaker
Type
167 W
1 Way 1 speaker
Net Weight
0.5 kg (1.1 lbs)
334 W
Max. Input power
Net Dimensions
(W x H x D)
260 mm x 92 mm x 73 mm
(10.2 inches x 3.6 inches x 2.8 inches)
6
Impedance Rated 3 Ω
Input Power
Subwoofer
Type
167 W
1 Way 1 speaker
Net Weight
0.65 kg (1.4 lbs)
334 W
Max. Input power
Net Dimensions
(W x H x D)
133 mm x 352 mm x 325 mm
(5.2 inches x 13.8 inches x 12.7 inches)
Impedance Rated 3 Ω
Input Power 167 W
Net Weight
5.2 kg (11.4 lbs)
Design and specifications are subject to change without notice.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
78 Appendix
Notes on discs
Maintenance
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Keeping the exterior surfaces clean
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Do not use volatile liquids such as insecticide
spray near the unit.
y
y
y
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Maintaining the unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 79
Important Information
relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a“Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-to-
date information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|