LG Electronics Flat Panel Television RU 15LA70C User Manual

LCD  
Color Television  
OWNER’S MANUAL  
MODEL: RU-15LA70C  
Please read this manual carefully before operating your set.  
Retain it for future reference.  
Record model number and serial number of the set.  
See the label attached on the back cover and quote this  
information to your dealer when you require service.  
(0410-REV02)  
P/NO : 3828TUL263C  
Printed in Korea  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Safety Instructions  
WARNING :  
To reduce the risk of fire or electric shock, DO NOT expose this apparatus to rain or moisture.  
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the  
apparatus.  
CAUTION :  
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform  
any servicing other than that contained in the operating instructions unless you are qualified to do so.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that  
produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider  
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is  
provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
11. Only use the attachments / accessories specified by the manufacturer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Safety Instructions continued  
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a  
cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any  
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
On Disposal  
a. The fluorescent lamp used in this product contains a small amount of mercury.  
b. Do not dispose of this product with general household waste.  
Disposal of this product must be carried out in accordance to the regulations of your local authority.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Contents  
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4  
Timer Menu Options  
Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . .19  
Manual Clock Setup . . . . . . . . . . . . . . . . . . . . .19  
On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .20  
Sleep Timer Setup . . . . . . . . . . . . . . . . . . . . . .20  
Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Special Menu Options  
Introduction  
Controls and Connection Options . . . . . . . . . .6~7  
Remote Control Key Functions . . . . . . . . . . . . . .8  
Installation  
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . .21  
Caption/Text . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Lock Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Lock Menu Setup . . . . . . . . . . . . . . . . . . . . . . .24  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Kensington Security System . . . . . . . . . . . . . . . .9  
Installation Instruction . . . . . . . . . . . . . . . . . . . . . .10  
External Equipment Connections . . . . . . . . . .11~14  
Antenna Connection . . . . . . . . . . . . . . . . . . . . .11  
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Cable TV Setup . . . . . . . . . . . . . . . . . . . . . . . .12  
External A/V Source Setup . . . . . . . . . . . . . . . .12  
Using Headphones . . . . . . . . . . . . . . . . . . . . . .13  
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
External Control Device Setup . . . . . . . . . . . . . . . . . . .25  
IR codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . .31  
Troubleshooting Checklist . . . . . . . . . . . . . . . . . . . . . .32  
Operation  
PC Menu Options . . . . . . . . . . . . . . . . . . . . . . . . .14  
TV Operation Overview . . . . . . . . . . . . . . . . . . . .15  
Menu Language Selection . . . . . . . . . . . . . . . . . .15  
Channel Menu Options  
Memorizing the Channels with EZ Scan . . . . . .16  
Add/Delete Channels with Manual Program . . .16  
Favorite Channels Setup . . . . . . . . . . . . . . . . . .16  
Picture Menu Options  
EZ Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Manual Picture Control (User option) . . . . . . . .17  
Sound Menu Options  
EZ Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Equalizer Adjustments . . . . . . . . . . . . . . . . . . .18  
AVL (Auto Volume Leveler) . . . . . . . . . . . . . . . .18  
Sound Balance . . . . . . . . . . . . . . . . . . . . . . . . .18  
Stereo/SAP Broadcasts Setup . . . . . . . . . . . . .18  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Introduction  
Controls  
Side Control Panel  
Channel Buttons  
Volume Buttons  
Enter Button  
Menu Button  
R
TV/Video Button  
On/Off Button  
Remote Control Sensor  
Power/Standby Indicator  
Glows red in Standby mode,  
Glows green when the TV is turned on.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Connection Options  
* Kensington Security  
System Connector  
(Refer to P.9)  
PC Input  
Remote Control Jack  
Headphone Jack  
RS 232C Jack  
AC Input  
Audio / Video Input  
S-Video Input  
Antenna Input  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Remote Control Key Functions  
- When using the remote control, aim it at the remote control sensor on the TV.  
MUTE  
MULTIMEDIA  
Selects: TV or PC mode.  
Switches the sound on or off.  
TV/VIDEO  
mute  
power  
Selects: TV, Video,  
S-Video or PC mode.  
POWER  
tv/video multimedia mts  
fcr  
exit  
menu  
FCR  
MTS  
(Refer to p.16)  
(Refer to p.18)  
MENU  
ch  
enter  
EXIT  
vol  
vol  
ENTER  
ch  
CH  
(Channel button)  
D / E  
1
4
2
5
8
0
3
6
VOL F / G (Volume button)  
NUMBER buttons  
7
9
audio  
video  
AUDIO  
VIDEO  
(Refer to p.18)  
(Refer to p.17)  
cc  
flashbk sleep  
CC  
SLEEP  
(Refer to p.22)  
(Refer to p.20)  
FLASHBK  
Press the FLASHBK button to  
return to the last channel you were  
watching.  
Installing Batteries  
Open the battery compartment cover on the back side and  
insert the batteries with correct polarity.  
Install two 1.5V batteries of AAA type. Dont mix used batteries  
with new batteries.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation  
mute  
power  
tv/video multimedia mts  
fcr  
exit  
menu  
Accessories  
ch  
enter  
vol  
vol  
ch  
1
4
2
5
8
0
3
6
7
9
audio  
video  
cc  
flashbk sleep  
1.5V  
Power Cord  
Owners Manual  
AAA Batteries  
Remote Control  
PC Signal Cable  
Tie Bands  
- Arrange the wires  
with the tie bands.  
Kensington Security System  
- The TV is equipped with a Kensington Security System connector  
on the back panel. Connect the Kensington Security System  
cable as shown below.  
- For the detailed installation and use of the Kensington Security  
System, refer to the users guide provided with the Kensington  
Security System.  
For further information, contact http://www.kensington.com, the  
internet homepage of the Kensington company. Kensington sells  
security systems for expensive electronic equipment such as note-  
book PCs and LCD projectors.  
- Note: The Kensington Security System is an optional accessory.  
NOTES  
a. If the TV feels cold to the touch, there may be a small flickerwhen when it is turned on.  
This is normal, there is nothing wrong with TV.  
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no  
adverse effect on the monitor's performance.  
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.  
Doing so may produce some temporary distortion effects on the screen.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation Instruction  
Rear A/V Cover  
* The connection panel is hidden behind the A/V cover.  
a. Remove the cover.  
b. Install wires as necessary.  
c. Reinstall the cover. Align the holes on the TV back panel with the two tabs on the rear A/V  
cover as shown.  
d. Close cover.  
Wire Holders  
- Thread, then pull the wires through the hole on the TV stand.  
Adjusting the TV Viewing Angle  
- You can adjust the vertical angle of the TV between -3° and 12°.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External Equipment Connections  
Antenna Connection  
- For optimum picture quality, adjust antenna direction.  
Connecting to an Inside Antenna Setup  
- Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below.  
(Use the correct type of antenna cable for the type of wall antenna jack.)  
Turn clockwise to tighten.  
Copper Wire  
75Round Cable  
Antenna  
Converter  
300Flat Wire  
Antenna Jack  
Wall Connection Jack  
Apartment Buildings  
- If you have a 75round cable, insert the bronze wire and then tighten the connection nut. If you have a 300flat wire, connect  
the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.  
- If using 75round cable, do not bend the bronze wire. It may cause poor picture quality.  
Connecting to an Outdoor Antenna Setup  
- This type of antenna is commonly used in single family dwellings.  
VHF Antenna  
Turn clockwise to tighten.  
UHF  
Antenna  
75Round Cable  
Copper Wire  
300Flat Wire  
Antenna Jack  
Antenna  
Converter  
Single Family Home  
- In poor signal areas, to get better picture quality, install a  
signal amplifier to the antenna as shown to the right.  
- If signal needs to be split for two TVs, use an antenna  
signal splitter for connection.  
VHF  
UHF  
Signal  
Amplifier  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External Equipment Connections Continued  
VCR Setup  
- In Video mode, TV automatically reverts to TV mode if the  
fcr button or flashbk buttons are pressed.  
Connection 1  
Set VCR switch to 3 or 4 and then tune TV to the same  
channel number.  
Connection 2  
2
Typical  
Antennas  
1. Connect the audio/video output jacks on VCR to the corre-  
sponding input jacks on the TV. When connecting the TV  
1
to a VCR, match the jack colors (Video = yellow, Audio  
Left = white, and Audio Right = red).  
2. Insert a video tape into the VCR and press PLAY on the  
VCR. (Refer to the VCR owners manual.)  
3. Use the tv/video button on the remote control to select  
Video. (If connected to S-VIDEO on side panel, select the  
S-Video external input source.)  
VCR  
Direct  
Connection  
Cable TV Setup  
- After subscribing to a local cable TV service and installing a converter, you can watch cable TV programming.  
- For further cable TV information, contact a local cable service provider.  
Connection 1  
1. Select 3 or 4 with channel switch on cable box.  
2. Tune the TV channel to the same selected output channel  
of cable box.  
3. Select channels at the cable box or with the cable box  
remote control.  
Connection 2  
1. Connect the audio/video output jacks on Cable Box to the  
corresponding input jacks on the TV. When connecting  
the TV to Cable Box, match the jack colors  
1
2
(Video = yellow, Audio Left = white, and Audio Right =  
red).  
(R) AUDIO ) VIDEO  
TV  
VCR  
RF  
Cable  
2. Use the tv/video button on the remote control to select  
Video.  
Cable Box  
3. Select channels with the cable box remote control.  
External A/V Source Setup  
Connections  
Connect the audio/video output jacks on the external A/V  
equipment to the corresponding input jacks on the TV.  
When connecting the TV to external A/V equipment,  
match the jack colors (Video = yellow, Audio Left = white,  
and Audio Right = red).  
Viewing Setup  
Camcorder  
1. Turn on the external A/V equipment.  
2. Use the tv/video button on the remote control to  
select Video.  
3. Operate the corresponding external equipment. Refer  
to external equipment operating guide.  
Video Game set  
External  
Equipment  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Using Headphones  
- Plug headphones in to H/P jack as shown.  
- Adjust sound level to a headphone using the volume (  
,
)
F G  
buttons. While you are listening to sound through a head-  
phone(s), TV speakers will not be heard.  
PC Setup  
- After setup, be sure to select PC source on TV.  
Connections  
1. Set the monitor output resolution on the PC before  
connecting to the TV.  
2. Connect the TV to the PC with the PC cable.  
3. Connect the PC audio output to the VIDEO INs L/R  
jacks.  
Viewing Setup  
1. Turn on the PC.  
2. Use the tv/video or multimedia button on the remote  
control to select PC.  
Audio Cable  
PC Cable  
Monitor Display Specifications  
Horizontal  
Vertical  
Resolution  
Frequency(kHz) Frequency(Hz)  
31.47  
35.00  
37.50  
60  
66.67  
75  
640x480  
35.16  
37.88  
48.08  
46.88  
56.25  
60  
800x600  
72.19  
75  
60  
70  
75  
48.36  
56.48  
60.02  
1024x768  
NOTES  
a. For optimum picture quality, use standard XGA (1024x768) computer output at a 60Hz refresh rate. Using other formats (VGA,  
SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to  
the operating manual for the computer you are using).  
b. If the message Out of rangeappears on the screen, adjust the PC output to a format listed in the Displayable Monitor  
Output Format Specifications' chart above.  
c. The synchronization input form for Horizontal and Vertical frequencies is separate.  
DPM (Display Power Management) mode  
If the PC goes to power saving mode, the monitor automatically switches to DPM mode.  
DPM mode may not work if you dont use the PC cable provided.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Operation  
PC Menu Options  
- After setup, be sure to select PC source to see the PC image on TV screen.  
PC  
H-Position  
V-Position  
Clock  
85  
Phase  
Auto Configure  
Reset  
D
E
F
OK MENU  
1. Press the menu button and then use D / E button to select the PC menu.  
2. Press the G button and then use D / E button to select desired item.  
3. Use the F / Gbutton to make appropriate adjustments.  
H-position/V-position  
Adjusts picture left/right and up/down.  
The adjustment ranges of H-Position is 0~100.  
(Based on the input mode, the adjustment range may change.)  
Clock  
Minimizes any vertical bars or stripes appearing on the screen background.  
The adjustment range is 0~100. (Based on the input mode, the adjustment range may change.)  
Phase  
Remove any horizontal noise and clear up or sharpen the character images.  
The range adjustment is 0~100. (Based on the input mode, the adjustment range may change.)  
Auto-configure  
Automatically adjusts the screen position, clock, and clock phase.  
(The displayed image will disappear for a few seconds while Auto-configuration is in progress.)  
Reset  
Returns to the default settings programmed at the factory; default settings  
cannot be changed.  
4. Press the enter button to save.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
TV Operation Overview  
1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power  
outlet. At this time, the TV is switched to standby mode.  
In standby mode, press the power, ch (  
), tv/video, multimedia or number button on the remote con-  
D,E  
trol or on/off, ch (  
), tv/video located on the TV to turn the TV on.  
D,E  
2. Select the viewing source by pressing tv/video or multimedia repeatedly.  
Note: See page 16 if you have not auto programmed the TV to receive channels in your local broadcast area.  
3. After viewing, press the power button on the remote control or on/off located on the TV. The TV reverts to  
standby mode.  
NOTE  
If you want to turn the TV off, press the on/off button located on the TV. If you intend to be away on vacation,  
disconnect the power plug from the wall power outlet.  
Menu Language Selection  
- The menus can be shown on the screen in the selected language. First select your language.  
1. Press the menu button and then use D  
button to select the Special menu.  
E
/
2. Press the G button and then use D  
button to select Language.  
E
/
3. Press the G button and then use D E button to select your desired language.  
/
From this point on, the on-screen menus will be shown in the language of your  
choice.  
4. Press the exit button to save and return to TV viewing.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Channel Menu Options  
Memorizing the Channels with EZ Scan  
- For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming sig-  
nals either over-the-air or from a cable-type service provider.  
Channel  
EZ Scan  
1. Press the menu button and then use D / E button to select the Channel menu.  
To start  
Manual prog.  
Favorite ch.  
2. Press the G button and then use D / E button to select EZ Scan.  
3. Press the G button to begin the channel search.  
Wait for auto program to complete the channel search cycle before  
choosing a channel. The TV scans for over-the-air channels and then  
channels provided by a cable service.  
D
F G OK MENU  
E
NOTES  
When the channel search is complete, use the D / E buttons to review the memorized channels.  
If you press the enter button in auto programming, the function will stop and only channels programming up to that time will remain.  
Auto program function can memorize only the channels which are being received at that time.  
Add/Delete Channels with Manual Program  
The current channel number is displayed.  
- You can manually include or erase individual channels.  
1. Press the menu button and then use D / E button to select the Channel menu.  
Channel  
EZ Scan  
Manual prog.  
Favorite ch.  
2. Press the G button and then use D / E button to select Manual prog.  
TV  
30  
Memory  
3. Press the G button and then use F / G button to select a channel you want  
to add to memory or erase.  
4. Press the E button and then use F / G button to select Memory (add) or  
Erase (delete).  
5. Press the enter button to save. The current channel is added to Memory or  
Erased from the channel list.  
D
E
F G OK MENU  
Â
EXIT  
Favorite Channels Setup  
- Favorite Channel lets you quickly tune in up to 8 channels of your choice without having to wait for the TV to scan through  
all the in-between channels.  
Channel  
Favorite Ch.  
EZ Scan  
Manual prog.  
Favorite ch.  
- - - - - - - - -  
- - - - - - - - -  
- - - - - - - - -  
- - - - - - - - -  
- - - - - - - - -  
- - - - - - - - -  
- - - - - - - - -  
- - - - - - - - -  
To set  
D
E
F G OK MENU  
Â
EXIT  
D
E
F G OK MENU  
1. Press the menu button and then use D / E button to select the Channel menu.  
2. Press the G button and then use D / E button to select Favorite ch..  
3. Press the G button and then use D / E button to select the first favorite channel position.  
4. Use the F / Gbutton to set the desired channel number for first favorite channel.  
5. Repeat steps 3 to 4 to memorize other channels.  
6. Press the enter button to save.  
To tune to a favorite channel, press the fcr (Favorite Channel Review) button repeatedly. The 8 favorite channels appear on  
the screen one-by-one.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Picture Menu Options  
EZ Video  
- This function adjusts the TV for the best picture appearance.  
1. Press the video button repeatedly to select the picture appearance setup option as shown below.  
Clear  
Optimum  
Soft  
User  
You can also adjust EZ Video in the Picture menu.  
Clear, Optimum and Soft are preset for good picture quality at the factory and cannot be changed.  
Manual Picture Control (User option)  
- You can adjust picture contrast, brightness, color, sharpness and tint to the levels you prefer.  
Picture  
EZ Video  
1. Press the menu button and then use D / E button to select the Picture menu.  
Contrast  
85  
2. Press the G button and then use D / E button to select the desired picture  
option (Contrast, Brightness, Color, Sharpness, Tint).  
Contrast  
Brightness  
Color  
Sharpness  
Tint  
3. Use the F / Gbutton to make appropriate adjustments.  
Contrast, Brightness, Color, and Sharpness are adjustable from 0 to 100.  
Tint is adjustable from - 50 to + 50.  
4. Press the enter button to save.  
D
E
F G OK MENU  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Sound Menu Options  
EZ Audio  
- This function lets you enjoy the best sound without any special adjustment because the TV selects the appropriate  
sound option based on the program content.  
1. Use the audio button to select the appropriate sound setup as shown below.  
Flat  
Music  
Movie  
Sports  
User  
You can also adjust EZ Audio in the Sound menu.  
Equalizer Adjustments  
1. Press the menu button and then use D / E button  
Sound  
EZ Audio  
AVL  
to select the Sound menu.  
Flat  
Music  
Movie  
Sports  
User  
2. Press the G button and then use D / E button to  
select EZ Audio.  
Balance  
G
3. Press the G button and then use D / E button to  
select User.  
0.1 0.5  
1
5
10 KHz  
Exit  
4. Press the G button and then use F / Gbutton to  
select the band you want to adjust. Then, use D /  
E button to adjust the band level.  
FG Move D Adjust  
Â
D
E
E
F G OK MENU  
5. Press the enter button to save.  
AVL (Auto Volume Leveler)  
Sound  
EZ Audio  
AVL  
- AVL maintains an equal volume level automatically even if the channel is  
changed.  
On  
Balance  
Off  
1. Press the menu button and then use D / E button to select the Sound menu.  
2. Press the G button and then use D / E button to select AV L .  
3. Press the G button and then use D / E button to to select On or Off.  
4. Press the enter button to save.  
D
E
F
OK MENU  
Sound Balance  
Sound  
EZ Audio  
AVL  
1. Press the menu button and then use D / E button to select the Sound menu.  
2. Press the G button and then use D / E button to select Balance.  
3. Press the G button and then use F / G button to adjust the sound balance.  
0
Balance  
Balance is adjustable from Left 50 to Right 50.  
4. Press the enter button to save.  
D
E
F G OK MENU  
Stereo/SAP Broadcasts Setup  
- The TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the  
stereo program, if the broadcaster transmits an additional sound signal as well as the original one.  
- Mono: The primary language is heard from left and right speakers. Signal mode is mono.  
- Stereo: The primary language is heard from left and right speakers. Signal mode is stereo.  
- SAP: The secondary language is heard from left and right speakers.  
1. Press the mts button repeatedly.  
Mono  
Stereo  
SAP  
Select mono sound mode if the signal is not clear or in poor signal reception areas.  
Stereo, SAP mode are available only if included on the broadcast signal.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Timer Menu Options  
Auto Clock Setup  
- The time is set automatically through from a PBS broadcast signal.  
- The PBS channel signal includes information for the correct time and daylight saving time.  
Timer  
Auto Clock  
Clock  
Time zone Auto  
Auto  
G
Off timer  
On timer  
Auto off  
PBS Ch.  
D.S.T.  
TV 1  
Auto  
Manual  
D
E
F G Move  
Adjust  
Â
Exit  
D
E
F G OK MENU  
1. Press the menu button and then use D / E button to select the Timer menu.  
2. Press the G button and then use D / E button to select Clock.  
3. Press the G button and then use D / E button to select Auto.  
4. Press the G button and then use D / E button to select the time zone for your viewing area. Your choices are:  
Auto, E.S.T. (Eastern Standard Time), C.S.T. (Central Standard Time), M.S.T. (Mountain Standard Time),  
P.S.T. (Pacific Standard Time), Alaska, and Hawaii.  
5. Press the G button and then use D / E button to set PBS channel.  
6. Press the G button and then use D / E button to set D.S.T. (Daylight Savings Time) Auto, Off or On, depending  
on whether or not your viewing area observes Daylight Savings Time.  
7. Press the enter button to save.  
Manual Clock Setup  
- If the time on the clock is incorrect, reset the clock manually.  
1. Press the menu button and then use D / E button to select the Timer  
menu.  
Timer  
Clock  
Auto  
Off timer  
On timer  
Auto off  
Manual  
G
2. Press the G button and then use D / E button to select Clock.  
3. Press the G button and then use D / E button to select Manual.  
4. Press the G button and then use D / E button to set the hour.  
- - : - - AM  
5. Press the G button and then use D / E button to set the minutes.  
D
E
F G OK MENU  
6. Press the enter button to save.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
On/Off Timer Setup  
- Timer function operates only if current time is set.  
- Off-Timer function overrides On-Timer function if they are set to the same time.  
- The TV must be in standby mode for the On-Timer to work.  
- If you dont press any button within 2 hours after turning on the TV with the On-Timer function, the TV will automatically  
revert to standby mode.  
1. Press the menu button and then use D / E button to select the Timer menu.  
Timer  
Clock  
Off timer  
On timer  
Auto off  
2. Press the G button and then use  
timer.  
button to select Off timer or On  
/ E  
D
- - : - - AM  
TV 2  
3. Press the G button and then use D / E button to set the hour.  
Volume  
30  
Run  
4. Press the G button and then use D / E button to set the minutes.  
5. For On timer function only:  
Press the G button and then use D / E button to set the channel at turn-on.  
D
E
F G OK MENU  
Then, press the G button and then use D / Ebutton to set the turn-on sound  
level.  
6. Press the G button and then use D / E button to select Run or Hold.  
Hold: Off timer/On timer will not work.  
Run: Off timer/On timer are active.  
7. Press the enter button to save.  
Sleep Timer Setup  
- The Sleep Timer turns the TV off at a preset time.  
1. Press the sleep button repeatedly to select the number of minutes. First the Sleep --- option appears on the  
screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.  
2. When the number of minutes you want is displayed on the screen, press the enter button. The timer begins to  
count down from the number of minutes selected.  
3. To check the remaining minutes before the TV turns off, press the sleep button once.  
4. To cancel the Sleep Timer, press the sleep button repeatedly until Sleep --- appears.  
Auto Off  
- If Auto Off is active and there is no input signal, the TV switches to Standby mode automatically  
after 10 minutes.  
Timer  
Clock  
1. Press the menu button and then use D / E button to select the Timer menu.  
2. Press the G button and then use D / E button to select Auto off.  
Off timer  
On timer  
Auto off  
3. Press the G button and then use D / E button to select On or Off.  
On  
Off  
4. Press the enter button to save.  
D
E
F
OK MENU  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Special Menu Options  
Closed Captions  
Closed captioning is a process which converts the audio portion of a television program into written words which then appear as sub-  
titles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs.  
Using Closed Captions  
Captions are the subtitles of the dialogue and narration of television programs. For prerecorded  
programs, program dialogue can be arranged into captions in advance. Its possible to caption a  
live program by using a process called real-time captioning, which creates captions instantly.  
Real-time captioning is normally done by professional reporters using a machine shorthand sys-  
tem and computer for translation into English.  
Captioning is an effective system for the hearing-impaired, and it can also aid in teaching lan-  
guage skills.  
FOLLOW ME  
The picture at left shows a typical caption.  
Caption Tips  
Not all TV broadcasts include closed caption signals.  
Sometimes TV stations broadcast four different caption signals on the same channel. By selecting From CC 1 to CC 4, you can  
choose which signal you view. CC 1 is usually the signal with the captions, while Another mode might show demonstration or  
programming information.  
Your TV might not receive caption signals normally in the following situations.  
1. Poor reception conditions are encountered:  
IGNITION:  
Picture may flutter, drift, suffer from black spots, or horizontal streaking. Usually caused by inter-  
ference from automobile ignition systems, neon lamps, electrical drills, and other electrical appli-  
ances.  
GHOSTS:  
Ghosts are caused when the TV signal splits and follows two paths. One is the direct path and the  
other is reflected off tall buildings, hills or other objects. Changing the direction or position of the  
antenna may improve reception.  
SNOW:  
If your receiver is located at the weak, fringe area of a TV signal, your picture may be marred by  
small dots. It may be necessary to install a special antenna to improve the picture.  
2. An old, bad, or illegally recorded tape is being played.  
3. Strong, random signals from a car or airplane interfere with the TV signal.  
4. The signal from the antenna is weak.  
5. The program wasnt captioned when it was produced, transmitted, or taped.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Caption/Text  
1. Press the menu button and then use D / E button to select the SPECIAL  
Special  
Language  
Caption/Text  
Captions  
Key lock  
Parental  
Set ID  
menu.  
2. Press the G button and then use D / E button to select Caption / Text.  
CC1  
CC2  
CC3  
CC4  
Text1  
Text2  
Text3  
Text4  
3. Press the G button and then use D / E button to select caption: CC1, CC2,  
CC3, CC4, Text1, Text2, Text3, or Text4.  
CAPTION  
The term for the words that scroll across the bottom of the TV screen;  
usually the audio portion of the program provided for the hearing  
impaired.  
D
E
F
OK MENU  
TEXT  
The term for the words that appear in a large black frame and almost  
cover the entire screen; usually messages provided by the broadcaster.  
4. Press the enter button to save.  
Captions  
1. Use the cc button repeatedly to select Caption Off, EZ Mute, or On.  
EZ Mute shows the selected captions option (if available on program) when the TV sound is muted  
2. Press the enter button to save.  
Key Lock  
- The TV can be set up so that it can only be used with the remote control.  
- This feature can prevent unauthorized viewing.  
Special  
Language  
1. Press the menu button and then use D / E button to select the Special menu.  
Caption/Text  
Captions  
2. Press the G button and then use D / E button to select Key lock.  
3. Use the D / E button to select On or Off.  
Key lock  
Parental  
Set ID  
On  
Off  
4. Press the enter button to save.  
D
E
F
OK MENU  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Lock Options  
Parental Control can be used to block specific channels, ratings and other viewing sources.  
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast station. The  
default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen  
to be blocked. It is also possible to block all program viewing for a time period. To use this function, the following must be set :  
1. Ratings and categories to be blocked.  
2. Set a password  
3. Enable the lock  
V-Chip rating and categories  
Rating guidelines are provided by broadcast stations. Most television programs and television movies can be blocked by TV  
Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating  
System (MPAA) only.  
For Movies previously shown in theaters :  
Movie Ratings :  
Unblocked  
G and Above  
PG and Above  
PG-13 and Above  
R and above  
NC-17 and Above  
X  
(general audience)  
(parental guidance suggested)  
(13 years and older)  
(restricted)  
(18 years and older)  
(adult)  
If you set PG-13 and Above : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.  
For Television programs including made-for-TV movies:  
General TV Ratings:  
Unblocked  
TV-G and Above  
TV-PG and Above  
TV-14 and Above  
TV-MA  
(general audience) (individual categories do not apply)  
(parental guidance suggested)  
(14 years and older)  
(mature audience)  
Children TV Ratings:  
Unblocked  
TV-Y and Above  
TV-Y7  
(youth) (individual content categories do not apply)  
(youth, 7 years and up)  
Content Categories:  
Dialog - sexual dialogue  
(applies to TV-PG and Above, TV-14)  
Language - adult language  
(applies to TV-PG and Above, TV-14 and Above, TV-MA)  
Sex scenes - sexual situations  
Violence  
F Violence - fantasy violence  
No Rating  
(applies to TV-PG and Above, TV-14 and Above, TV-MA)  
(applies to TV-PG and Above, TV-14 and Above, TV-MA)  
(applies only to TV-Y7)  
(blocks all viewing)  
For Canadian English/French language rating system:  
Canadian English language rating system:  
C & Above  
(Children)  
C8+  
(8 years and older)  
G & Above  
PG & Above  
14+  
(General programming. Suitable for all audiences.)  
(Parental guidance suggested)  
(Viewer 14 years and older)  
(Adult programming)  
18+  
Canadian French language rating system:  
G & Above  
(General)  
8 ans+  
(8 years and older)  
(13 years and older)  
(16 years and older)  
(Adults only)  
13 ans+  
16 ans+  
18 ans+  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Lock Menu Setup  
Special  
Parental  
On  
Off  
Language  
Caption / Text  
Captions  
Key lock  
Parental  
Set ID  
Lock  
Set password  
MPAA  
Age block  
Content block  
Aux. block  
Canadian  
To set  
D
E
D
E
F G OK MENU  
F G OK MENU  
1. Press the menu button and then use D / E button to select the Special menu.  
2. Press the G button and then use D / E button to select Parental.  
Then, press the G button.  
If Lock is already set, enter the password requested.  
The TV is set with the initial password 0-0-0-0.  
2. Setting Lock on/off:  
Press the D / E button to select Lock on/off.  
Press the G button and then use D / E button to select on or off.  
3. Set password:  
Press the D / E button to select Set password.  
Press the G button and then enter a four digit password.  
Enter it again when requested.  
4. Press the D / E button to select type of blocking to be set .  
5. Press the G button and then use D / E button to select type of ratings to block .  
Age block, and Content block, and Canadian (option) menus, also have sub menus. So, repeat steps 4 and 5 in the sub  
menu, to set the types of blocking and ratings.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Control Device Setup  
External Control Device Setup  
- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system)  
and control the Monitors functions externally.  
- Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.  
- RS-232C connection cables are not supplied with the Monitor.  
RS-232C Setup  
PC  
Type of Connector; D-Sub 9-Pin Male  
No. Pin name  
1
5
1
2
3
4
5
6
7
8
9
No connection  
RXD (Receive data)  
TXD (Transmit data)  
DTR (DTE side ready)  
GND  
DSR (DCE side ready)  
RTS (Ready to send)  
CTS (Clear to send)  
No Connection  
9
6
RS-232C Configurations  
3-Wire Configurations  
(Not standard)  
PC  
TV  
RXD  
TXD  
GND  
DTR  
DSR  
RTS  
CTS  
RXD  
TXD  
GND  
DTR  
DSR  
RTS  
CTS  
2
3
5
4
6
7
8
2
3
5
4
6
7
8
D-Sub 9  
D-Sub 9  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Control Device Setup  
Set ID  
- Use this function to specify a monitor ID number.  
- Refer to Real Data Mapping 1. See page 27.  
Special  
1. Press the menu button and then use  
button to select the Special  
/ E  
D
Language  
Caption/Text  
Captions  
Key lock  
Parental  
Set ID  
menu.  
2. Press the G button and then use D / E button to select Set ID.  
3. Press the G button and then use / E button to adjust Set ID to choose  
D
--  
the desired monitor ID number. The adjustment range of Set ID is 1 ~ 99.  
4. Press the enter button to save.  
D
E
F
OK MENU  
Communication Parameters  
Baud rate : 9600 bps (UART)  
Data length : 8 bits  
Parity : None  
Stop bit : 1 bit  
Communication code : ASCII code  
Transmission / Receiving Protocol  
Command Reference List  
Transmission  
[Command1][Command2][ ][Set ID][ ][Data][Cr]  
COMMAND  
1
DATA 2  
(Hexa)  
COMMAND  
2
DATA 1  
(Hexa)  
[Command 1]: First command. (j or k)  
[Command 2]: Second command.  
*
*
*
01. Power  
k
k
k
k
k
k
k
k
k
k
k
k
m
m
m
j
a
b
d
e
f
g
h
i
j
k
l
m
a
b
c
u
0 ~ 1  
0 ~ 6  
0 ~ 1  
0 ~ 1  
02. Input Select  
03. Screen Mute  
04. Volume Mute  
05. Volume Control  
06. Contrast  
07. Brightness  
08. Color  
09. Tint  
10. Sharpness  
11. OSD Select  
12. Key Lock  
13. Tune Command  
14. Add/Delete  
15. Key  
[Set ID]: You can adjust the set ID to choose desired monitor  
ID number in Special menu. Adjustment range is 1  
~ 99. When selecting Set ID 0, every connected  
TV set is controlled. Set ID is indicated as decimal  
(1~99) on menu and as Hexa decimal (0x0~0x63)  
on transmission/receiving protocol.  
0 ~ 64  
0 ~ 64  
0 ~ 64  
0 ~ 64  
0 ~ 64  
0 ~ 64  
0 ~ 1  
0 ~ 1  
01 ~ 7D  
0~1  
[DATA]: To transmit command data.  
Transmit FFdata to read status of command.  
[Cr]: Carriage Return  
*
*
*
ASCII code 0x0D’  
[
]: ASCII code space (0x20)’  
0~1  
OK Acknowledgement  
[Command2][ ][Set ID][ ][OK][Data][x]  
Key Code  
1
16. Auto Configure  
* The Monitor transmits ACK (acknowledgement) based on  
this format when receiving normal data. At this time, if the  
data is data read mode, it indicates present status data. If  
the data is data write mode, it returns the data of the PC  
computer.  
Error Acknowledgement  
[Command2][ ][Set ID][ ][NG][Data][x]  
* The Monitor transmits ACK (acknowledgement) based on  
this format when receiving abnormal data from non-viable  
functions or communication errors.  
Data 1: Illegal Code  
2: Not supported function  
3: Wait more time  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Control Device Setup  
01. Power On (Command:a)  
05. Volume Control (Command:f)  
G To control Power On/Off of the TV.  
Transmission  
GTo adjust volume.  
You can also adjust volume with the volume buttons  
on remote control.  
[k][a][ ][Set ID][ ][Data][Cr]  
Transmission  
Data 0 : Power Off  
1
: Power On  
[k][f][ ][Set ID][ ][Data][Cr]  
Acknowledgement  
Data Min : 0 ~ Max : 64  
[a][ ][Set ID][ ][OK][Data][x]  
Refer to Real data mapping 1as shown below.  
Acknowledgement  
G To show Power On/Off.  
Transmission  
[f][ ][Set ID][ ][OK][Data][x]  
[k][a][ ][Set ID][ ][FF][Cr]  
Acknowledgement  
06. Contrast (Command:g)  
[a][ ][Set ID][ ][OK][Data][x]  
G To adjust screen contrast.  
You can also adjust contrast in the Picture menu.  
Data 0 : Power Off  
1
: Power On  
Transmission  
[k][g][ ][Set ID][ ][Data][Cr]  
02. Input Select (Command:b) (Main Picture Input)  
Data Min : 0 ~ Max : 64  
G To select input source for the TV.  
Refer to Real data mapping 1as shown below.  
Acknowledgement  
You can also select an input source using the TV/VIDEO  
button on the TV's remote control.  
[g][ ][Set ID][ ][OK][Data][x]  
Transmission  
[k][b][ ][Set ID][ ][Data][Cr]  
Data 0 : TV  
2 : Video  
07. Brightness (Command:h)  
3 : S-Video  
6 : PC  
Acknowledgement  
G To adjust screen brightness.  
You can also adjust brightness in the Picture menu.  
Transmission  
[b][ ][Set ID][ ][OK][Data][x]  
[k][h][ ][Set ID][ ][Data][Cr]  
Data Min : 0 ~ Max : 64  
Refer to Real data mapping 1as shown below.  
Acknowledgement  
03. Screen Mute (Command:d)  
GTo select screen mute on/off.  
[h][ ][Set ID][ ][OK][Data][x]  
Transmission  
[k][d][ ][Set ID][ ][Data][Cr]  
Real data mapping 1  
*
Data 0 : Screen mute off (Picture on)  
1 : Screen mute on (Picture off)  
0 : Step 0  
A : Step 10  
Acknowledgement  
[d][ ][Set ID][ ][OK][Data][x]  
F : Step 15  
10 : Step 16  
04. Volume Mute (Command:e)  
64 : Step 100  
GTo control volume mute on/off.  
You can also adjust mute using the MUTE button on  
remote control.  
* Tint : -50 ~ +50  
Transmission  
[k][e][ ][Set ID][ ][Data][Cr]  
Data 0 : Volume mute on (Volume off)  
1 : Volume mute off (Volume on)  
Acknowledgement  
[e][ ][Set ID][ ][OK][Data][x]  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Control Device Setup  
08. Color (Command:i)  
13. Tune Command (Command:m a)  
G Tune channel to following Physical/major/minor number.  
GTo adjust the screen color.  
You can also adjust color in the Picture menu.  
Transmission  
Transmission  
[m][a][ ][Set ID][ ][Data0][ ][Data1][Cr]  
[k][i][ ][Set ID][ ][Data][Cr]  
Data Min : 0 ~ Max : 64  
Data0: Channel Number  
Min : 1 ~ Max : 0x7D(transmit by Hexadecimal code)  
Data1:TV-0, CATV-1 (transmit by Hexadecimal code)  
Refer to Real data mapping 1. See page 27.  
Acknowledgement  
Acknowledgement  
[i][ ][Set ID][ ][OK][Data][x]  
[a][ ][Set ID][ ][OK][Data0][Data1][x]  
[a][ ][Set ID][ ][NG][Data0][x]  
09. Tint (Command:j)  
GTo adjust the screen tint.  
14. Channel Add/Del (Command:m b)  
You can also adjust tint in the Picture menu.  
G To add and delete the channels.  
Transmission  
Transmission  
[k][j][ ][Set ID][ ][Data][Cr]  
[m][b][ ][Set ID][ ][Data 0][Cr]  
Data0: (Channel)Delete-0, (Channel)Add-1  
Data Green : 0 ~ Red : 64  
Refer to Real data mapping 1. See page 27.  
Acknowledgement  
Acknowledgement  
[j][ ][Set ID][ ][OK][Data][x]  
[b][ ][Set ID][ ][OK][Data0][x]  
[b][ ][Set ID][ ][NG][Data0][x]  
10. Sharpness (Command:k)  
15. Key (Command:m c)  
GTo adjust the screen sharpness.  
You can also adjust sharpness in the Picture menu.  
G To send IR remote key code.  
Transmission  
Transmission  
[k][k][ ][Set ID][ ][Data][Cr]  
[m][c][ ][Set ID][ ][Data][Cr]  
Data: Key code- Refer Users Manual  
Data Min: 0 ~ Max: 64  
Refer to Real data mapping 1. See page 27.  
Acknowledgement  
Acknowledgement  
[k][ ][Set ID][ ][OK][Data][x]  
[c][ ][Set ID][ ][OK][Data][x]  
11. OSD Select (Command:l)  
GTo select OSD (On Screen Display) mute on/off.  
Transmission  
16. Auto Configure (Command:j u)  
G Automatically adjusts the screen position, clock and clock  
phase.  
[k][l][ ][Set ID][ ][Data][Cr]  
Transmission  
Data 0: OSD mute on  
Acknowledgement  
1: OSD mute off  
[j][u][ ][Set ID][ ][Data][Cr]  
Data 1: To set  
[l][ ][Set ID][ ][OK][Data][x]  
Acknowledgement  
[u][ ][Set ID][ ][OK][Data][x]  
12. Key Lock (Command:m)  
G To lock the remote control and the front panel controls on  
the TV.  
Transmission  
[k][m][ ][Set ID][ ][Data][Cr]  
Data 0: Lock off  
1: Lock on  
Acknowledgement  
[m][ ][Set ID][ ][OK][Data][x]  
If youre not using the remote control and front panel controls  
on the monitor, use this mode. When main power is on/off,  
remote control lock is released.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IR Codes  
IR Codes  
How to Connect  
G
Connect your wired remote control to the Remote Control port on the Monitor.  
Remote Control IR Code  
G Output waveform  
Single pulse, modulated with 37.917KHz signal at 455KHz  
TC  
Carrier frequency  
FCAR = 1/TC = fOSC/12  
Duty ratio = T1/TC = 1/3  
T1  
G Configuration of frame  
1st frame  
Lead  
code  
Low  
custom code  
High  
custom code  
Data code  
Data code  
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7  
Repeat frame  
Repeat code  
Tf  
G Lead code  
9 ms  
4.5 ms  
0.55 ms  
G Repeat code  
9 ms  
2.25 ms  
G Bit description  
Bit 0”  
Bit 1”  
0.56 ms  
1.12 ms  
0.56 ms  
2.24 ms  
G Frame interval : Tf  
The waveform is transmitted as long as a key is depressed.  
Tf  
Tf  
Tf=108ms @455KHz  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IR Codes  
Code (Hexa)  
Function  
POWER  
POWER ON  
POWER OFF  
TV/VIDEO  
TV  
Note  
08H  
C4H  
C5H  
0BH  
D6H  
5AH  
D8H  
D5H  
00H  
R/C Button (Power On/Off)  
Discrete IR Code  
Discrete IR Code  
R/C Button (TV/Video/S-video/RGB)  
Discrete IR Code (Input TV Selection)  
Discrete IR Code (Input Video Selection)  
Discrete IR Code (Input S-video Selection)  
Discrete IR Code (Input RGB Selection)  
R/C Button  
Video  
S-video  
RGB (PC)  
CH (D)  
01H  
CH (E)  
R/C Button  
03H  
02H  
43H  
VOL (F )  
VOL (G)  
MENU  
R/C Button  
R/C Button  
R/C Button  
44H  
R/C Button  
R/C Button  
R/C Button  
Discrete IR Code  
R/C Button  
ENTER  
EXIT  
MTS  
Auto Configure  
SLEEP  
FLASHBACK  
CC  
5BH  
0AH  
99H  
0EH  
1AH  
39H  
R/C Button  
R/C Button  
52H  
R/C Button  
AUDIO  
4DH  
10H~19H  
1EH  
09H  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
VIDEO  
Number Keys 0~9  
FCR  
MUTE  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance & Product Specification  
Maintenance  
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your  
new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.  
Cleaning the Screen  
1. Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and  
a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the  
screen.  
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.  
Cleaning the Cabinet  
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.  
Please be sure not to use a wet cloth.  
Extended Absence  
If you leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power  
cord to protect against possible damage from lightning or power surges.  
Product Specifications  
MODEL  
AC100-240V~ 50/60Hz 0.9A  
Power Requirement  
Power Consumption  
Audio Output  
55W  
3 W + 3 W  
NTSC  
Television System  
VHF : 2 ~ 13, UHF : 14 ~ 69, Cable : 01 ~ 125  
Television Channel  
Television Screen  
LCD Panel  
75 Ω  
External Antenna Impedance  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Checklist  
Troubleshooting Checklist  
SYMPTOMS  
No power  
No picture or sound  
Poor picture but good sound  
Poor reception  
Lines in picture  
Ghosts (multiple images)  
Remote control does not work.  
Cannot tune desired channel.  
CHECK THESE THINGS  
Is power cord plugged in ?  
Is television turned on ?  
Check batteries in remote control.  
Try another channel (station trouble).  
Check antenna connectings.  
Check for local interference.  
Adjust the antenna.  
Adjust the picture control.  
Program channel using EZ Scan.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lenmar Enterprises Battery Charger PRO9V2 User Manual
Lenovo Computer Monitor T545 User Manual
LG Electronics Air Conditioner 3828A20025V User Manual
LG Electronics Car Satellite TV System 26LD320H User Manual
LG Electronics Refrigerator LRFC22750 User Manual
LG Electronics Washer WM8000HA User Manual
Manitowoc Ice Ice Maker 7620283 R12 400 User Manual
Manitowoc Ice Ice Maker Q160 User Manual
Manitowoc Ice Refrigerator A 1100 User Manual
Meyer Sound Computer Monitor X 10 User Manual