LCD
Color Television
OWNER’S MANUAL
MODEL: 17LX1R
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
(0503-REV00)
P/N : 3828TUL315C
Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Safety Instructions
WARNING :
To reduce the risk of fire or electric shock, DO NOT expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
CAUTION :
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform
any servicing other than that contained in the operating instructions unless you are qualified to do so.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use the attachments / accessories specified by the manufacturer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Safety Instructions continued
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords,
or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discon-
tinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
On Disposal
a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4
Picture Menu Options
EZ Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Manual Picture Control (User option) . . . . . . . .17
Picture format (ARC) . . . . . . . . . . . . . . . . . . . .17
Sound Menu Options
EZ Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Equalizer Adjustments . . . . . . . . . . . . . . . . . . .18
AVL (Auto Volume Leveler) . . . . . . . . . . . . . . . .18
Sound Balance . . . . . . . . . . . . . . . . . . . . . . . . .18
Stereo/SAP Broadcasts Setup . . . . . . . . . . . . .18
Time Menu Options
Introduction
Controls & Connection Options . . . . . . . . . . . . . .6
Remote Control Key Functions . . . . . . . . . . . . . .7
Installation
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Kensington Security System . . . . . . . . . . . . . . . .8
Installation Instruction
Connection of TV . . . . . . . . . . . . . . . . . . . . . . . .9
Cable Holders . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Adjusting the TV Viewing Angle . . . . . . . . . . . . .9
External Equipment Connections
Antenna Connection . . . . . . . . . . . . . . . . . . . . .10
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Cable TV Setup . . . . . . . . . . . . . . . . . . . . . . . .11
External A/V Source Setup . . . . . . . . . . . . . . . .11
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
DTV Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Using Headphones . . . . . . . . . . . . . . . . . . . . . .12
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . .19
Manual Clock Setup . . . . . . . . . . . . . . . . . . . . .19
On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . .20
Sleep Timer Setup . . . . . . . . . . . . . . . . . . . . . .20
Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Special Menu Options
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . .21
Caption/Text . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Lock Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Lock Menu Setup . . . . . . . . . . . . . . . . . . . . . . .24
Operation
PC Menu Options . . . . . . . . . . . . . . . . . . . . . . . . .14
TV Operation Overview . . . . . . . . . . . . . . . . . . . .15
Menu Language Selection . . . . . . . . . . . . . . . . . .15
Channel Menu Options
Memorizing the Channels with EZ Scan . . . . . .16
Add/Delete Channels with Manual Program . . .16
Favorite Channels Setup . . . . . . . . . . . . . . . . . .16
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . .25
Troubleshooting Checklist . . . . . . . . . . . . . . . . . . . . . .26
After reading this manual, keep it handy for future reference.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Introduction
Controls & Connection Options
CH
Channel Buttons
Volume Buttons
VOL
ENTER
MENU
Enter Button
Menu Button
TV
TV·Video Button
VIDEO
/I
On/Off Button
ON/OFF
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode, illuminates
green when the set is switched on.
VIDEO Input
AUDIO Input
IN2
(
)
S-Video Input
Headphone Jack
DVD/DTV Input
PC Input
Antenna Input
AC Input
Audio/Video Input
PC sound Input
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Remote Control Key Functions
- When using the remote control, aim it at the remote control sensor on the TV.
MUTE
MULTIMEDIA
Selects: TV, Component or
Switches the sound on or off.
PC mode.
TV/VIDEO
MUTE
POWER
Selects: TV, Video1, Video2,
S-Video, Component or
PC mode.
POWER
TV/VIDEO MULTIMEDIA MTS
FCR EXIT MENU
MTS
FCR
(Refer to p.16)
(Refer to p.18)
MENU
CH
ENTER
EXIT
VOL
VOL
ENTER
CH
CH
(Channel button)
D / E
1
2
5
8
0
3
6
VOL F / G (Volume button)
4
NUMBER buttons
7
9
AUDIO
VIDEO
AUDIO
VIDEO
(Refer to p.18)
(Refer to p.17)
CC
FLASHBK SLEEP
CC
SLEEP
(Refer to p.20)
ARC
(Refer to p.21)
ARC
(Refer to p.17)
FLASHBK
Press the FLASHBK button to
return to the last channel you were
watching.
Installing Batteries
• Open the battery compartment cover on the back side and
insert the batteries with correct polarity.
• Use two 1.5V batteries of AAA type. Don’t mix used batteries
with new batteries.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Installation
MUTE
POWER
Accessories
TV/VIDEO MULTIMEDIA MTS
FCR EXIT MENU
CH
ENTER
VOL
VOL
CH
1
2
5
8
0
3
6
4
7
9
AUDIO
VIDEO
CC
FLASHBK SLEEP
ARC
1.5V
Power Cord
Owner’s Manual
AAA Batteries
Remote Control
Polishing cloth
PC Sound Cable
Tie Holder
- Arrange the wires with
the tie Holder.
PC Signal Cable
Kensington Security System
- The TV is equipped with a Kensington Security System connector
on the back panel. Connect the Kensington Security System
cable as shown below.
- For the detailed installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington
Security System.
internet homepage of the Kensington company. Kensington sells
security systems for expensive electronic equipment such as note-
book PCs and LCD projectors.
- Note: The Kensington Security System is an optional accessory.
NOTES
a. If the TV feels cold to the touch, there may be a small “flicker” when when it is turned on.
This is normal, there is nothing wrong with TV.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no
adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation Instruction
Connection of TV
1
2
Pull the back cover backside while pushing the two tabs and then lift it up.
Connect the antenna cable to the socket marked +75 Ω on the back. For the best reception an
outdoor antenna should be used.
3 To connect an additional equipment, see the External Equipment Connections section.
4
5
Connect the power cord.
Close the back cover.
1
2
4
~
5
Cable Holders
- Thread, then pull the cables through the hole on the TV stand.
Adjusting the TV Viewing Angle
- You can adjust the vertical angle of the TV.
3
15
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections
Antenna Connection
- For optimum picture quality, adjust antenna direction.
Connecting to an Inside Antenna Setup
- Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below.
(Use the correct type of antenna cable for the type of wall antenna jack.)
Turn clockwise to tighten.
75Ω Round Cable
Copper Wire
(
)
300Ω Flat Wire
Antenna
Converter
Antenna Jack
Wall Connection Jack
Apartment Buildings
- If you have a 75Ω round cable, insert the bronze wire and then tighten the connection nut. If you have a 300Ω flat wire, connect
the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.
- If using 75Ω round cable, do not bend the bronze wire. It may cause poor picture quality.
Connecting to an Outdoor Antenna Setup
- This type of antenna is commonly used in single family dwellings.
VHF Antenna
Turn clockwise to tighten.
(
)
UHF
Antenna
75Ω Round Cable
Copper Wire
300Ω Flat Wire
Antenna Jack
Antenna
Converter
Single Family Home
- In poor signal areas, to get better picture quality, install a
signal amplifier to the antenna as shown to the right.
- If signal needs to be split for two TVs, use an antenna
signal splitter for connection.
VHF
UHF
(
)
Signal
Amplifier
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External Equipment Connections Continued
VCR Setup
- In Video mode, TV automatically reverts to TV mode if the
fcr button or flashbk buttons are pressed.
Connection 1
Set VCR switch to 3 or 4 and then tune TV to the same
channel number.
Connection 2
2
Typical
Antennas
1. Connect the audio/video output jacks on VCR to the corre-
sponding input jacks on the TV. When connecting the TV to
1
a VCR, match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
2. Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
3. Use the TV/VIDEO button on the remote control to select
VCR
Direct
Connection
Video1 or Video2. (If connected to S-VIDEO on side panel,
select the S-Video external input source.)
Cable TV Setup
- After subscribing to a local cable TV service and installing a converter, you can watch cable TV programming.
- For further cable TV information, contact a local cable service provider.
Connection 1
1. Select 3 or 4 with channel switch on cable box.
2. Tune the TV channel to the same selected output channel
of cable box.
3. Select channels at the cable box or with the cable box
remote control.
Connection 2
1. Connect the audio/video output jacks on Cable Box to the
corresponding input jacks on the TV. When connecting the
TV to Cable Box, match the jack colors
1
2
(Video = yellow, Audio Left = white, and Audio Right = red).
2. Use the TV/VIDEO button on the remote control to select
Video1 or Video2.
Cable Box
3. Select channels with the cable box remote control.
External A/V Source Setup
Connections
Connect the audio/video output jacks on the external A/V
equipment to the corresponding input jacks on the TV.
When connecting the TV to external A/V equipment,
match the jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
Viewing Setup
Camcorder
1. Turn on the external A/V equipment.
2. Use the TV/VIDEO button on the remote control to
select Video1or Video2.
3. Operate the corresponding external equipment.
Video Game set
Refer to external equipment operating guide.
External
Equipment
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
DVD Setup
Connections
1. Connect the DVD video outputs to the COMPONENT (Y, PB,
PR) jacks and connect the DVD audio outputs to the AUDIO
jacks.
2. If your DVD only has an S-Video output jack, connect this to
the S-VIDEO input on the TV and connect the DVD audio
outputs to the AUDIO INPUT jacks on the TV, as shown in
the figure.
NOTE: If your DVD player does not have component video
output, use S-Video.
Viewing Setup
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO or MULTIMEDIA button on the remote
control to select Component (If connected to S-VIDEO,
select the S-Video input source.)
3. Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to
the component input ports as shown below.
DVD
Component ports
Y
PB
PR
of the TV
Pr
R-Y
Cr
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Video output ports
of DVD player
PR
DTV Setup
- To watch digitally broadcast programs, purchase and
connect a digital set-top box.
Connections
Connect the digital set-top box video outputs to the
COMPONENT (Y, PB, PR) jacks and connect the digital
set-top box audio outputs to the AUDIO jacks.
Viewing Setup
1. Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
2. Use the TV/VIDEO or MULTIMEDIA button on the
remote control to select Component.
DTV Receiverr (Set-top Box)
Using Headphones
- Plug headphones in to H/P jack as shown.
- Adjust sound level to a headphone using the volume ( )
,
F G
buttons. While you are listening to sound through a head-
phone(s), TV speakers will not be heard.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
PC Setup
- After setup, be sure to select PC source on TV.
Connections
1. Set the monitor output resolution on the PC before
connecting to the TV.
2. Connect the TV to the PC with the PC cable.
3. Connect the PC audio output to the TV's PC SOUND
input.
Viewing Setup
1. Turn on the PC.
2. Use the TV/VIDEO or MULTIMEDIA button on the
remote control to select PC.
Monitor Display Specifications
Horizontal
Vertical
MODE
Resolution
Frequency(kHz) Frequency(Hz)
31.4
35.0
37.5
60
67
75
VGA
640x480
35.1
37.8
48.0
46.8
56
60
72
75
SVGA
800x600
60
70
75
48.3
56.4
60.0
XGA
WXGA
1024x768
1280x768
47.6
60
NOTES
a. For optimum picture quality, use standard WXGA 1280x768 computer output at a 60Hz refresh rate. Using other formats (VGA,
SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to
the operating manual for the computer you are using).
b. If the message “Out of range” appears on the screen, adjust the PC output to a format listed in the ‘Displayable Monitor
Output Format Specifications' chart above.
c. The synchronization input form for Horizontal and Vertical frequencies is separate.
DPM (Display Power Management) mode
If the PC goes to power saving mode, the monitor automatically switches to DPM mode.
DPM mode may not work if you don’t use the PC cable provided.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Operation
PC Menu Options
- After setup, be sure to select PC source to see the PC image on TV screen.
PC
H-Position
V-Position
Clock
85
Phase
Auto Configure
Reset
D
E
F G OK MENU
1. Press the MENU button and then use D / E button to select the PC menu.
2. Press the G button and then use D / E button to select desired item.
3. Use the F / Gbutton to make appropriate adjustments.
• H-position/V-position
Adjusts picture left/right and up/down.
The adjustment ranges of H-Position is 0~100.
(Based on the input mode, the adjustment range may change.)
• Clock
Minimizes any vertical bars or stripes appearing on the screen background.
The adjustment range is 0~100. (Based on the input mode, the adjustment range may change.)
• Phase
Remove any horizontal noise and clear up or sharpen the character images.
The range adjustment is 0~100. (Based on the input mode, the adjustment range may change.)
• Auto-configure
Automatically adjusts the screen position, clock, and clock phase.
(The displayed image will disappear for a few seconds while Auto-configuration is in progress.)
• Reset
Returns to the default settings programmed at the factory; default settings
cannot be changed.
4. Press the ENTER button to save.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
TV Operation Overview
1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power
outlet. At this time, the TV is switched to standby mode.
• In standby mode, press the POWER, CH (
remote control or ON/OFF, CH (
), TV/VIDEO, MULTIMEDIA or NUMBER button on the
D,E
), TV/VIDEO located on the TV to turn the TV on.
D,E
2. Select the viewing source by pressing TV/VIDEO or MULTIMEDIA repeatedly.
• Note: See page 17 if you have not auto programmed the TV to receive channels in your local broadcast area.
3. After viewing, press the POWER button on the remote control or ON/OFF located on the TV. The TV reverts to
standby mode.
NOTE
• If you want to turn the TV off, press the on/off button located on the TV. If you intend to be away on vacation,
disconnect the power plug from the wall power outlet.
Menu Language Selection
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use D
button to select the Special menu.
E
/
2. Press the G button and then use D
button to select Language.
E
/
3. Press the G button and then use D E button to select your desired language.
/
From this point on, the on-screen menus will be shown in the language of your
choice.
4. Press the EXIT button to save and return to TV viewing.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Channel Menu Options
Memorizing the Channels with EZ Scan
- For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming sig-
nals either over-the-air or from a cable-type service provider.
Channel
EZ Scan
1. Press the MENU button and then use D / E button to select the Channel menu.
To start
Manual prog.
Favorite ch.
2. Press the G button and then use D / E button to select EZ Scan.
3. Press the G button to begin the channel search.
• Wait for auto program to complete the channel search cycle before
choosing a channel. The TV scans for over-the-air channels and then
channels provided by a cable service.
D
F G OK MENU
E
NOTES
• When the channel search is complete, use the D / E buttons to review the memorized channels.
• If you press the ENTER button in auto programming, the function will stop and only channels programming up to that time will remain.
• Auto program function can memorize only the channels which are being received at that time.
Add/Delete Channels with Manual Program
The current channel number is displayed.
- You can manually include or erase individual channels.
1. Press the MENU button and then use D / E button to select the Channel menu.
Channel
EZ Scan
Manual prog.
Favorite ch.
2. Press the G button and then use D / E button to select Manual prog..
TV
30
Memory
3. Press the G button and then use F / G button to select a channel you want
to add to memory or erase.
4. Press the E button and then use F / G button to select Memory (add) or
Erase (delete).
5. Press the ENTER button to save. The current channel is added to Memory
or Erased from the channel list.
D
E
F G OK MENU
Â
EXIT
Favorite Channels Setup
- Favorite Channel lets you quickly tune in up to 8 channels of your choice without having to wait for the TV to scan through
all the in-between channels.
Channel
Favorite Ch.
EZ Scan
Manual prog.
Favorite ch.
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
To set
D
E
F G OK MENU
Â
EXIT
D
E
F G OK MENU
1. Press the MENU button and then use D / E button to select the Channel menu.
2. Press the G button and then use D / E button to select Favorite ch..
3. Press the G button and then use D / E button to select the first favorite channel position.
4. Use the F / Gbutton to set the desired channel number for first favorite channel.
5. Repeat steps 3 to 4 to memorize other channels.
6. Press the ENTER button to save.
• To tune to a favorite channel, press the FCR (Favorite Channel Review) button repeatedly. The 8 favorite channels appear on
the screen one-by-one.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Picture Menu Options
EZ Video
- This function adjusts the TV for the best picture appearance.
1. Press the VIDEO button repeatedly to select the picture appearance setup option as shown below.
Clear
Optimum
Soft
User
• You can also adjust EZ Video in the Picture menu.
•
Clear, Optimum and Soft are preset for good picture quality at the factory and cannot be changed.
Manual Picture Control (User option)
- You can adjust picture contrast, brightness, color, sharpness and tint to the levels you prefer.
Picture
EZ Video
1. Press the MENU button and then use D / E button to select the Picture menu.
Contrast
85
2. Press the G button and then use D / E button to select the desired picture
option (Contrast, Brightness, Color, Sharpness, Tint).
Contrast
Brightness
Color
Sharpness
Tint
3. Use the F / Gbutton to make appropriate adjustments.
•
Contrast, Brightness, Color, and Sharpness are adjustable from 0 to 100.
• Tint is adjustable from - 50 to + 50.
4. Press the ENTER button to save.
D
E
F G OK MENU
Picture format (ARC)
- You can watch TV in various picture formats; 16:9, Zoom, 4:3.
Repeatedly press the ARC button to select your desired picture format.
•
16:9
You can enjoy the cinema (the picture format of 16:9) or general TV programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
•
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper / lower and left / right sides so that the screen 16:9 is full. The bottom and top of the pic-
ture may be lost.
•
4:3
This picture format is 4 to 3 of general TV.
NOTES
Zoom is not available in PC mode.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Sound Menu Options
EZ Audio
- This function lets you enjoy the best sound without any special adjustment because the TV selects the appropriate
sound option based on the program content.
1. Use the AUDIO button to select the appropriate sound setup as shown below.
Flat
Music
Movie
Sports
User
• You can also adjust EZ Audio in the Sound menu.
Equalizer Adjustments
1. Press the MENU button and then use D / E but-
Sound
EZ Audio
AVL
ton to select the Sound menu.
Flat
Music
Movie
Sports
User
2. Press the G button and then use D / E button to
select EZ Audio.
Balance
G
3. Press the G button and then use D / E button to
select User.
0.1 0.5
1
5
10 KHz
Exit
4. Press the G button and then use F / Gbutton to
select the band you want to adjust. Then, use
D / E button to adjust the band level.
FG Move D Adjust
Â
D
E
E
F G OK MENU
5. Press the ENTER button to save.
AVL (Auto Volume Leveler)
Sound
EZ Audio
AVL
- AVL maintains an equal volume level automatically even if the channel is
changed.
On
Balance
Off
1. Press the MENU button and then use D / E button to select the Sound menu.
2. Press the G button and then use D / E button to select AV L .
3. Press the G button and then use D / E button to to select On or Off.
4. Press the ENTER button to save.
D
E
F G OK MENU
Sound Balance
Sound
EZ Audio
AVL
1. Press the MENU button and then use D / E button to select the Sound menu.
2. Press the G button and then use D / E button to select Balance.
3. Press the G button and then use F / G button to adjust the sound balance.
Balance
0
• Balance is adjustable from Left 50 to Right 50.
4. Press the ENTER button to save.
D
E
F G OK MENU
Stereo/SAP Broadcasts Setup
- The TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the
stereo program, if the broadcaster transmits an additional sound signal as well as the original one.
- Mono: The primary language is heard from left and right speakers. Signal mode is mono.
- Stereo: The primary language is heard from left and right speakers. Signal mode is stereo.
- SAP: The secondary language is heard from left and right speakers.
1. Press the MTS button repeatedly.
Mono
Stereo
SAP
• Select mono sound mode if the signal is not clear or in poor signal reception areas.
• Stereo, SAP mode are available only if included on the broadcast signal.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Timer Menu Options
Auto Clock Setup
- The time is set automatically through from a PBS broadcast signal.
- The PBS channel signal includes information for the correct time and daylight saving time.
Timer
Auto Clock
Clock
Time zone Auto
Auto
G
Off timer
On timer
Auto off
PBS Ch.
D.S.T.
TV 1
Auto
Manual
F G Move D Adjust
Â
Exit
E
D
E
F G OK MENU
1. Press the MENU button and then use D / E button to select the Timer menu.
2. Press the G button and then use D / E button to select Clock.
3. Press the G button and then use D / E button to select Auto.
4. Press the G button and then use D / E button to select the time zone for your viewing area. Your choices are:
Auto, E.S.T. (Eastern Standard Time), C.S.T. (Central Standard Time), M.S.T. (Mountain Standard Time),
P.S.T. (Pacific Standard Time), Alaska, and Hawaii.
5. Press the G button and then use D / E button to set PBS channel.
6. Press the G button and then use D / E button to set D.S.T. (Daylight Savings Time) Auto, Off or On, depending
on whether or not your viewing area observes Daylight Savings Time.
7. Press the ENTER button to save.
Manual Clock Setup
- If the time on the clock is incorrect, reset the clock manually.
1. Press the MENU button and then use D / E button to select the Timer
menu.
Timer
Clock
Auto
Off timer
On timer
Auto off
Manual
G
2. Press the G button and then use D / E button to select Clock.
3. Press the G button and then use D / E button to select Manual.
4. Press the G button and then use D / E button to set the hour.
- - : - - AM
5. Press the G button and then use D / E button to set the minutes.
D
E
F G OK MENU
6. Press the ENTER button to save.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
On/Off Timer Setup
- Timer function operates only if current time is set.
- Off-Timer function overrides On-Timer function if they are set to the same time.
- The TV must be in standby mode for the On-Timer to work.
- If you don’t press any button within 2 hours after turning on the TV with the On-Timer function, the TV will automatically
revert to standby mode.
1. Press the MENU button and then use
menu.
button to select the Timer
/ E
D
Timer
Clock
Off timer
On timer
Auto off
2. Press the G button and then use
timer.
button to select Off timer or On
/ E
D
- - : - - AM
TV
Volume 30
2
Run
3. Press the G button and then use D / E button to set the hour.
4. Press the G button and then use D / E button to set the minutes.
5. For On timer function only:
D
E
F G OK MENU
Press the G button and then use D / E button to set the channel at turn-on.
Then, press the G button and then use D / Ebutton to set the turn-on sound
level.
6. Press the G button and then use D / E button to select Run or Hold.
• Hold: Off timer/On timer will not work.
Run: Off timer/On timer are active.
7. Press the ENTER button to save.
Sleep Timer Setup
- The Sleep Timer turns the TV off at a preset time.
1. Press the SLEEP button repeatedly to select the number of minutes. First the Sleep --- option appears on the
screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to
count down from the number of minutes selected.
3. To check the remaining minutes before the TV turns off, press the SLEEP button once.
4. To cancel the Sleep Timer, press the SLEEP button repeatedly until Sleep --- appears.
Auto Off
- If Auto Off is active and there is no input signal, the TV switches to Standby mode automatically
after 10 minutes.
Timer
Clock
Off timer
On timer
Auto off
1. Press the MENU button and then use
menu.
button to select the Timer
/ E
D
2. Press the G button and then use D / E button to select Auto off.
On
Off
3. Press the G button and then use D / E button to select On or Off.
4. Press the ENTER button to save.
D
E
F G OK MENU
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Special Menu Options
Closed Captions
Closed captioning is a process which converts the audio portion of a television program into written words which then appear as sub-
titles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs.
Using Closed Captions
Captions are the subtitles of the dialogue and narration of television programs. For prerecorded
programs, program dialogue can be arranged into captions in advance. Its possible to caption a
live program by using a process called real-time captioning, which creates captions instantly.
Real-time captioning is normally done by professional reporters using a machine shorthand sys-
tem and computer for translation into English.
Captioning is an effective system for the hearing-impaired, and it can also aid in teaching lan-
guage skills.
FOLLOW ME
•
The picture at left shows a typical caption.
Caption Tips
• Not all TV broadcasts include closed caption signals.
• Sometimes TV stations broadcast four different caption signals on the same channel. By selecting From CC 1 to CC 4, you can
choose which signal you view. CC 1 is usually the signal with the captions, while Another mode might show demonstration or
programming information.
• Your TV might not receive caption signals normally in the following situations.
1. Poor reception conditions are encountered:
•
•
•
IGNITION:
Picture may flutter, drift, suffer from black spots, or horizontal streaking. Usually caused by inter-
ference from automobile ignition systems, neon lamps, electrical drills, and other electrical appli-
ances.
GHOSTS:
Ghosts are caused when the TV signal splits and follows two paths. One is the direct path and the
other is reflected off tall buildings, hills or other objects. Changing the direction or position of the
antenna may improve reception.
SNOW:
If your receiver is located at the weak, fringe area of a TV signal, your picture may be marred by
small dots. It may be necessary to install a special antenna to improve the picture.
2. An old, bad, or illegally recorded tape is being played.
3. Strong, random signals from a car or airplane interfere with the TV signal.
4. The signal from the antenna is weak.
5. The program wasn’t captioned when it was produced, transmitted, or taped.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Caption/Text
1. Press the MENU button and then use
menu.
button to select the Special
/ E
Special
D
Language
Caption/Text
Captions
Key lock
Parental
Logo
2. Press the G button and then use D / E button to select Caption / Text.
CC1
CC2
CC3
CC4
Text1
Text2
Text3
Text4
3. Press the G button and then use D / E button to select caption: CC1, CC2,
CC3, CC4, Text1, Text2, Text3, or Text4.
• CAPTION
The term for the words that scroll across the bottom of the TV screen;
usually the audio portion of the program provided for the hearing
impaired.
D
E
F G OK MENU
• TEXT
The term for the words that appear in a large black frame and almost
cover the entire screen; usually messages provided by the broadcaster.
4. Press the ENTER button to save.
Captions
1. Use the CC button repeatedly to select Caption Off, EZ Mute, or On.
• EZ Mute shows the selected captions option (if available on program) when the TV sound is muted
2. Press the ENTER button to save.
Key Lock
- The TV can be set up so that it can only be used with the remote control.
- This feature can prevent unauthorized viewing.
Special
Language
1. Press the MENU button and then use D / E button to select the Special menu.
Caption/Text
Captions
2. Press the G button and then use D / E button to select Key lock.
Key lock
Parental
Logo
On
Off
3. Press the G button and then use D / E button to select On or Off.
4. Press the ENTER button to save.
D
E
F G OK MENU
Logo
- Illuminates brightly when the set is turned on.
Special
1. Press the MENU button and then use D / E button to select the Special menu.
Language
Caption/Text
Captions
Key lock
Parental
Logo
2. Press the G button and then use D / E button to select Logo.
3. Press the G button and then use D / E button to select On or Off.
On
Off
4. Press the ENTER button to save.
D
E
F G OK MENU
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Lock Options
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast station. The
default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen
to be blocked. It is also possible to block all program viewing for a time period. To use this function, the following must be set :
1. Ratings and categories to be blocked.
2. Set a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcast stations. Most television programs and television movies can be blocked by TV
Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating
System (MPAA) only.
For Movies previously shown in theaters :
Movie Ratings :
• Unblocked
• G and Above
• PG and Above
• PG-13 and Above
• R and above
• NC-17 and Above
• X
(general audience)
(parental guidance suggested)
(13 years and older)
(restricted)
(18 years and older)
(adult)
If you set PG-13 and Above : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
For Television programs including made-for-TV movies:
General TV Ratings:
• Unblocked
• TV-G and Above
• TV-PG and Above
• TV-14 and Above
• TV-MA
(general audience) (individual categories do not apply)
(parental guidance suggested)
(14 years and older)
(mature audience)
Children TV Ratings:
• Unblocked
• TV-Y and Above
• TV-Y7
(youth) (individual content categories do not apply)
(youth, 7 years and up)
Content Categories:
• Dialog - sexual dialogue
(applies to TV-PG and Above, TV-14)
• Language - adult language
(applies to TV-PG and Above, TV-14 and Above, TV-MA)
• Sex scenes - sexual situations
• Violence
• F Violence - fantasy violence
• No Rating
(applies to TV-PG and Above, TV-14 and Above, TV-MA)
(applies to TV-PG and Above, TV-14 and Above, TV-MA)
(applies only to TV-Y7)
(blocks all viewing)
For Canadian English/French language rating system:
Canadian English language rating system:
• C and Above
(Children)
• C8+
(8 years and older)
• G and Above
• PG and Above
• 14+
(General programming. Suitable for all audiences.)
(Parental guidance suggested)
(Viewer 14 years and older)
(Adult programming)
• 18+
Canadian French language rating system:
• G and Above
(General)
• 8 ans+
(8 years and older)
(13 years and older)
(16 years and older)
(Adults only)
• 13 ans+
• 16 ans+
• 18 ans+
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Lock Menu Setup
Special
Parental
On
Off
Language
Caption / Text
Captions
Key lock
Parental
Logo
Lock
Set password
MPAA
Age block
Content block
Aux. block
Canadian
To set
D
E
D
E
F G OK MENU
F G OK MENU
1. Press the MENU button and then use D / E button to select the Special menu.
2. Press the G button and then use D / E button to select Parental.
Then, press the G button.
• If Lock is already set, enter the password requested.
• The TV is set with the initial password “0-0-0-0”.
2. Setting Lock on/off:
Press the D / E button to select Lock on/off.
Press the G button and then use D / E button to select on or off.
3. Set password:
Press the D / E button to select Set password.
Press the G button and then enter a four digit password.
Enter it again when requested.
4. Press the D / E button to select type of blocking to be set .
5. Press the G button and then use D / E button to select type of ratings to block .
• Age block, and Content block, and Canadian (option) menus, also have sub menus. So, repeat steps 4 and 5 in the sub
menu, to set the types of blocking and ratings.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance & Product Specification
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your
new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and
a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the
screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
If you leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning or power surges.
Product Specifications
Power Requirement
Power Consumption
Television System
AC100-240V~ 50/60Hz 1.0A
65W
NTSC,PAL-M/N
Television Channel
Television Screen
VHF : 2 ~ 13, UHF : 14 ~ 69, Cable : 01 ~ 125
LCD Panel
75 Ω
External Antenna Impedance
Audio Output
5 W + 5 W
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Checklist
Troubleshooting Checklist
The operation does not work normally.
• Check to see if there is any object between the product and the remote
control causing obstruction.
• Are batteries installed with correct polarity (+ to +, - to -)?
• Correct remote operating mode set: TV, VCR etc.?
• Install new batteries.
The remote control
doesn’t work
• Is the sleep timer set?
• Check the power control settings. Power interrupted
• No broadcast on station tuned with Auto off activated.
Power is suddenly
turned off
The video function does not work.
• Check whether the product is turned on.
• Try another channel. The problem may be with the broadcast.
• Is the power cord inserted into wall power outlet?
• Check your antenna direction and/or location.
No picture &
No sound
• Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
• This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after five
minutes.
Picture appears
slowly after
switching on
• Adjust Color in menu option.
• Keep a sufficient distance between the product and the VCR.
• Try another channel. The problem may be with the broadcast.
• Are the video cables installed properly?
No or poor color
or poor picture
• Activate any function to restore the brightness of the picture.
Horizontal/verti-
cal bars or pic-
ture shaking
• Check for local interference such as an electrical appliance or power tool.
• Station or cable product experiencing problems, tune to another station.
• Station signal is weak, reorient antenna to receive weaker station.
• Check for sources of possible interference.
Poor reception on
some channels
Lines or streaks
in pictures
• Check antenna (Change the direction of the antenna).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Checklist
The audio function does not work.
• Press the VOL (or Volume) button.
• Sound muted? Press MUTE button.
• Try another channel. The problem may be with the broadcast.
Picture OK &
No sound
• Are the audio cables installed properly?
No output from one
of the speakers
• Adjust Balance in menu option.
Unusual sound
from inside the
product
• A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault with
the product.
There is a problem in PC mode.
(Only PC mode applied)
• Adjust resolution, horizontal frequency, or vertical frequency.
• Check it whether the signal cable is connected or loose.
• Check the input source.
The signal is out of
range.
Vertical bar or
stripe on back-
ground &
• Work the Auto configure or adjust clock, phase, or H/V position.
Horizontal Noise &
Incorrect position
• Check the signal cable.
• Reinstall the PC video card.
Screen color is
unstable or single
color
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|