LCD TV
OWNER’S MANUAL
MODELS: 15LS1R
20LS1R
23LS2R
20LC1R
*
*
*
*
20LS2R
15LC1R
*
*
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require service.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Stand Installation
1. Assemble parts of stand body with cover base of the stand. Insert stand body into a cover base
until clicking sound.
2. Carefully place the product screen side down on a cushioned surface that will protect product
and screen from damage.
3. Place the product stand on the product as shown.
Note: Here shown may be somewhat different from your set.
stand body
cover base
Detaching stand
1. Place the set with its front facing downward on a cushion or soft cloth.
2. Hold the stand with both hands and bend it upward.
3. Pull each side of cover base backward during pressing latch upward.
4. Hold cover base and pull with shake it backward to separate from stand body.
5. Pull stand body to separate from set during pressing 2 latches.
Note: Here shown may be somewhat different from your set.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Unfolding the stand base
1. Place the set with its front facing downward on a cushion or soft cloth.
2. Hold down the release button inside the stand and strongly pull out the stand with your two hands.
Note: Here shown may be somewhat different from your set.
The stand won't move if you
don't press release button.
Connection of TV
1. Connect the aerial cable to the socket marked ANTENNA IN
on the back. For the best reception an outdoor aerial should
be used.
2. To connect an additional equipment, see the Connection of
(
)
external equipment section.
3. Connect the power cord.
Note: Here shown may be somewhat different from your set.
Basic connection
1. Connect the cables as necessary.
To connect an additional equipment,see the Connection of external equipment section.
2. Install the Cable management as shown.
Note: Here shown may be somewhat different from your set.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
How to remove the Cable management
First, press the cable management.
Hold the Cable management with both hands and pull it upward.
Note: Do not hold the CABLE MANAGEMENT when moving the product. (If the product is dropped,you
may be injured or the product may be broken.)
Wall Mount: Horizontal installation
< 20LC1R only >
*
R
2-Ring spacers
4 inches
4 inches
Place the ring spacers on the set before installing the
wall mounting bracket so that the inclination of the
backside of the set can be adjusted perpendicularly.
4 inches
4 inches
R
4 inches
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
Desktop Pedestal Installation
4 inches
4 inches
4 inches
4 inches
R
For proper ventilation, allow a clearance of 4" on each side and
from the wall.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Positioning your display
Adjust the position of the panel in various ways for maximum comfort.
• Tilt range
Location
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the
back of the TV.
When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Kensington Security System
- The TV is equipped with a Kensington Security System connector on the back panel. Connect the
Kensington Security System cable as shown below.
- For the detailed installation and use of the Kensington Security System, refer to the user’s guide
provided with the Kensington Security System.
Kensington company. Kensington sells security systems for expensive electronic equipment such as
notebook PCs and LCD projectors.
Note:
- The Kensington Security System is an optional accessory.
Note:
a. If the TV feels cold to the touch, there may be a small “flicker” when when it is turned on.
This is normal, there is nothing wrong with TV.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
d. Here shown may be somewhat different from your set.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and function of controls
9
10
1
POWER
TV
2
INPUT
MUTE
TV
POWER
I/II
1
2
10
9
4
10
12
14
5
9
1
INPUT
1
4
3
6
14
7
5
LIST Q.VIEW MENU
5
8
0
3
11
7
9
2
PR
LIST
Q.VIEW
11
3
OK
6
2
VOL
VOL
PSM
SSM
PR
4
5
12
13
11
3
6
MUTE
VOL
TEXT
VOL
PR
OK
1
4
2
5
8
0
3
6
9
6
7
14
15
7
PR
8
SSM
PSM
12
15
4
8
7
15
13
/
SLEEP ARC
UPDATE
TEXT
16
8
HOLD SIZE MIX TIME
REVEAL INDEX MODE UPDATE
13
TIME
MIX
16
13 13
SIZE
?
M
i
HOLD
REVEAL
?
INDEX
i
MODE
M
16
[with ARC]
[with ARC]
SSM
PSM
PSM
SSM
0
SLEEP
TEXT
MUTE
VOL
TEXT
VOL
PR
OK
*
UPDATE
SIZE
TIME
MIX
HOLD
REVEAL
?
PR
INDEX
i
MODE
M
*
[without ARC]
[without ARC]
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and function of controls
All the functions can be controlled with the remote 11. Q.VIEW
control handset. Some functions can also be
adjusted with the buttons on the top panel of the
set. Only the remote control handset supplied will
operate this set.
returns to the previously viewed programme.
Press the Q.VIEW button to view the last pro-
gramme you were watching.
12. SSM (Sound Status Memory)
recalls your preferred sound setting.
Remote control handset
13. TELETEXT BUTTONS
Before you use the remote control handset,
please install the
batteries. See the next page.
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
14. I/II
1. POWER
selects the language during dual language
broadcast.
switches the set on from standby or off to
standby.
15. ARC (20LS2R / 23LS2R )
*
*
2. NUMBER BUTTONS
select your desired picture format.
switches the set on from standby and selects
a programme.
16. COLOURED BUTTONS : These buttons are
used for teletext (only TELETEXT models) or
programme edit.
3. LIST
displays the programme table.
: No function
*
4. PSM (Picture Status Memory)
recalls your preferred picture setting.
Battery installation
5. MUTE
switches the sound on or off.
Press the MUTE button. The sound is
switched off and the display
appears.
You can cancel it by pressing the MUTE, F / G,
I/II, or SSM button.
6.
(Programme Up/Down)
D E
/
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Down/Up)
adjusts the volume.
The remote control handset is powered by two
AAA batteries. To load the batteries, turn the
remote control handset over and open the battery
compartment. Install two batteries as indicated by
adjusts menu settings.
OK
accepts your selection or displays the current
mode.
the polarity symbols ( + and
the compartment.
) marked inside
-
7. MENU
selects a menu.
Note : To avoid damage from possible battery
leakage, remove the batteries if you do not plan to
use the remote control handset for an extended
period of time.
8. SLEEP
sets the sleep timer.
9. TV
returns to the TV mode.
switches the set on from standby.
10. INPUT
selects the remote operating mode.
switches the set on from standby.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and function of controls
Front
If your product has a protection film attached, remove the film and then wipe the product with a polishing
cloth.
Top panel
INPUT
OK
VOL
PR
/I
MENU
6
1
2
3
4
5
15LS1R / 20LS1R
20LS2R / 23LS2R
*
*
*
*
7
7
8
8
15LC1R / 20LC1R
*
*
Top panel
PR
VOL
OK
INPUT
MENU
/I
7
1
6
5
4
3
2
8
6. E / D (Programme Down/Up)
1. ON/OFF (r / I)
selects a programme or a menu item.
switches the set on from standby.
switches the set on from standby or off to
standby.
7. REMOTE CONTROL SENSOR
8. POWER/STANDBY INDICATOR
- 15LS1R / 20LS1R / 20LS2R / 23LS2R
2. INPUT
selects the remote operating mode.
switches the set on from standby.
*
*
*
*
3. MENU
selects a menu.
illuminates red in standby mode.
illuminates green when the set is switched on.
4. OK
-
15LC1R / 20LC1R
*
*
accepts your selection or displays the current
mode.
illuminates orange in standby mode.
illuminates blue when the set is switched on.
5. F / G (Volume Down/Up)
adjusts the volume.
adjusts menu settings.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and function of controls
Rear
ANTENNA
INPUT
PC SOUND
INPUT
15LS1R
PC INPUT
JACK
*
RGB(PC/DTV) IN
ANTENNA IN
AUDIO
(RGB) IN
AV 1
VIDEO
H/P
S-VIDEO
AV IN 2
HEADPHONE
JACK
S-VIDEO
INPUT
AUDIO/VIDEO
EURO SCART
SOCKET
INPUT
AC INPUT
ANTENNA
INPUT
20LS1R
FOR SERVICE
JACK
*
SERVICE ONLY
ANTENNA IN
AV 1
VIDEO
H/P
S-VIDEO
AV IN 2
HEADPHONE
JACK
AC INPUT
AUDIO/VIDEO
INPUT
EURO SCART
SOCKET
S-VIDEO
INPUT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and function of controls
Rear
PC INPUT
JACK
20LS2R / 23LS2R
*
*
ANTENNA
INPUT
PC SOUND
INPUT
HEADPHONE
JACK
HDMI/DVI
INPUT
AC INPUT
RGB
(PC/DTV) IN
AUDIO
(RGB/DVI) IN
ANTENNA IN
S-VIDEO
HDMI/DVI IN
AV IN 2
H/P
AUDIO
VIDEO
L
R
AV 1
Y
PB
PR
L
R
VIDEO
AUDIO
COMPONENT IN
EURO SCART
SOCKET
AUDIO/VIDEO
S-VIDEO
INPUT
COMPONENT
INPUT
INPUT
20LS2RC
RS-232C
(SERVICE ONLY)
HDMI/DVI
PC INPUT
JACK
ANTENNA
INPUT
PC SOUND
INPUT
HEADPHONE
JACK
AC INPUT
INPUT
RS-232C
(SERVICE ONLY)
RGB
(PC/DTV) IN
AUDIO
(RGB/DVI) IN
ANTENNA IN
HDMI/DVI IN
AV IN 2
AUDIO
H/P
VIDEO
S-VIDEO
L
R
AV 1
Y
PB
PR
L
R
VIDEO
AUDIO
COMPONENT IN
EURO SCART
SOCKET
COMPONENT
INPUT
S-VIDEO
INPUT
AUDIO/VIDEO
INPUT
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and function of controls
Rear
ANTENNA
INPUT
PC SOUND
INPUT
15LC1R
PC INPUT
JACK
*
RGB(PC/DTV) IN
ANTENNA IN
AUDIO
(RGB) IN
AV 1
VIDEO
H/P
S-VIDEO
AV IN 2
HEADPHONE
JACK
S-VIDEO
INPUT
AUDIO/VIDEO
EURO SCART
SOCKET
INPUT
AC INPUT
ANTENNA
INPUT
20LC1R
FOR SERVICE
JACK
*
SERVICE ONLY
ANTENNA IN
AV 1
VIDEO
H/P
S-VIDEO
AV IN 2
HEADPHONE
JACK
AC INPUT
AUDIO/VIDEO
INPUT
EURO SCART
SOCKET
S-VIDEO
INPUT
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operation
On and off
POWER
TV
2
INPUT
1. Press the POWER,
, TV, INPUT or NUMBER buttons to
D E
/
1
4
3
6
switch it on fully.
5
8
0
2. Press the POWER button. The set reverts to standby mode.
3. Pull out mains plugs to switch the set off.
7
9
LIST
Q.VIEW
Note : If, while the set is switched on, the mains plug is disconnected
the set will switch to standby or power on when the mains plug is
replaced in the mains power socket.
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
On-Screen Menu Language / Country Selection
PR
Installation guide menu appears on TV screen when it is turned on for the
first time.
POWER
1. Press the
F G button and then, OK button to select your
D / E /
/
TV
INPUT I/II
desired language.
Press the
2.
F G button and then, OK button to select your
D / E /
/
MENU
country.
* If you want to change Language/ Country selection
PR
1. Press the MENU button and then
button to select the
D
E
/
OK
VOL
VOL
SPECIAL menu.
PR
2. Press the G button and then
button to select Language.
D E
/
The menus can be shown on the screen in the selected language.
Or, Press the G button and then
3. Press the G button and then
desired language or country.
4. Press the OK button.
button to select Country.
1
4
2
5
8
0
3
6
9
D E
/
D / E /
F G button to select your
/
7
5. Repeatedly press the MENU button to return to normal TV
SSM
viewing.
Note:
a. If you don’t finish set up Installation Guide by pressing MENU
button or time out of OSD (On Screen Display) display, it will
continuously appear until completing set up whenever the set
is turned on.
b. If you select wrong local country, the teletext may not appear
correctly on the screen and some problem may happen during
teletext operation.
c. Hebrew is added to Country of Installation Guide according
to the countries which using Hebrew languages.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
On screen menus
PSM
SSM
Menu selection
MUTE
VOL
TEXT
VOL
PR
OK
1. Press the MENU button and then
2. Press the Gbutton and then
button to display each menu.
button to select a menu item.
D E
/
D E
/
3. Change the setting of an item in the sub or pull-down menu with
button.
PR
F / G
*
You can move to the higher level menu by pressing the OK
button and to move to the lower level menu by pressing the
button.
MENU
Note :
a. The SCREEN (20LS1R /20LC1R ) menu is not displayed.
MENU
*
*
b. In the teletext mode, menus are not displayed.
c. On some models, the Language will not be displayed.
PR
OK
VOL
VOL
PR
Programme selection
You can select a programme number with the D / E or NUMBER
buttons.
Volume adjustment
Press the F / G button to adjust the volume.
:
20LS2R , 23LS2R
*
*
Station
Picture
PSM
CSM
XD*
Cinema*
Reset
Sound
Auto programme
Manual programme
Programme edit
Favourite programme
SSM
AVL
Balance
0
DE FG OK MENU
DE FG OK MENU
DE FG OK MENU
STATION menu
SOUND menu
PICTURE menu
Screen
Special
Time
Auto config.
Manual config.
XGA Mode*
ARC*
Language
Country
Clock
Off time
On time
Auto sleep
Child lock
XD Demo*
Reset
DE FG OK MENU
DE FG OK MENU
DE FG OK MENU
SCREEN menu
SPECIAL menu
TIME menu
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up TV stations
Station
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Auto programme
Manual programme
Programme edit
Favourite programme
Once you have preset the stations, you will be able to use the
D E
/
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Auto programme tuning
All stations that can be received are stored by this method. It is
recommended that you use auto programme during installation
of this set.
DE FG OK MENU
1
4
2
3
6
1. Press the MENU button and then
button to select the
D
E
/
Station menu.
5
8
2. Press the G button and then
button to select Auto
D E
/
7
9
programme.
LIST
Q.VIEW
0
Auto programme
PSM
SSM
System
G
BG
I
MUTE
VOL
TEXT
VOL
PR
OK
Storage from
Search
DK
L
PR
DE FG OK MENU
MENU
3. Press the G button. Select a TV system with the G button and
then button on the System menu;
D E
/
BG : PAL B/G, SECAM B/G (Europe/East Europe)
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
: SECAM L/L’ (France)
4. Press the OK button.
5. Press the button to select Storage from.
PR
I
OK
VOL
VOL
L
PR
D E
/
1
4
7
2
5
8
0
3
6
9
6. Select the beginning programme number with the F / G button
or NUMBER buttons on the Storage from pull-down menu. Any
number under 10 is entered with a numeric ‘0’ in front of it, i.e.
‘05’ for 5.
7. Press the OK button.
8. Press the
button to select Search.
D E
/
Auto programme
System
Auto programme
Storage from
Search
G
To start
C 05
5
BG
35%
MENU Stop
DE FG OK MENU
9. Press the G button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the ‘Programme edit’ section
to edit the stored programme.
10. Repeatedly press the MENU button to return to normal TV
viewing.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up TV stations
Station
Manual programme tuning
Auto programme
Manual programme
Programme edit
Favourite programme
Manual programme lets you manually tune and arrange the
stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1. Press the MENU button and then
button to select the
D
E
/
DE FG OK MENU
Station menu.
2. Press the G button and then
button to select Manual
D E
/
programme.
1
4
2
3
6
3. Press the Gbutton and then
button to select Storage.
D E
/
5
8
Manual programme
7
9
Storage
System
Band
G
29
LIST
Q.VIEW
0
PSM
SSM
Channel
Fine
MUTE
VOL
TEXT
VOL
PR
OK
Search
Name
DE FG OK MENU
PR
4. Select the desired programme number (0 to 99) with the F / G
button or NUMBER buttons on the Storage menu. Any number
under 10 is entered with a numeric ‘0’ in front of it, i.e. ‘05’ for 5.
5. Press the OK button.
MENU
6. Press the
button to select System.
D E
/
7. Select a TV system with the G button and then F / G button on
the System menu;
PR
OK
BG : PAL B/G, SECAM B/G (Europe/East Europe)
VOL
VOL
PR
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
: SECAM L/L’ (France)
8. Press the OK button.
9. Press the button to select Band.
L
1
4
7
2
5
8
0
3
6
9
D E
/
10. Press the G button and then
Cable on the Band menu.
11. Press the OK button.
button to select VHF/UHF or
D E
/
12. Press the
13. Select the desired programme with
buttons.
button to select Channel.
D E
/
button or NUMBER
F / G
14. Press the OK button.
15. Press the
button to select Search.
D E
/
16. Press the G button and then
button to commence search-
F / G
ing on the Search pull-down menu. If a station is found the search
will stop.
17. Press the OK button to store it.
18. To store another station, repeat steps 3 to 17.
Manual programme
Storage
System
Band
Channel
Fine
Search
Name
G
F / G
DE FG OK MENU
19. Repeatedly press the MENU button to return to normal TV
viewing.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up TV stations
Station
Assigning a station name
1. Repeat the ‘Manual programme tuning’ steps 1 to 2.
2. Press the G button and then
3. Press the G button and then use the
Auto programme
Manual programme
Programme edit
Favourite programme
button to select Name.
D E
/
. You can use a blank,
D E
/
+, -, the number 0 to 9 and the alphabet A to Z. It can be saved 5
digits for name.
With the F button you can select in the opposite direction.
4. Select the position by pressing the F / G button and then make
your choice of the second character, and so on.
5. Press the OK button to store it.
DE FG OK MENU
7
8
9
LIST
Q.VIEW
0
PSM
SSM
6. Repeatedly press the MENU button to return to normal TV
MUTE
VOL
TEXT
VOL
PR
OK
viewing.
Fine tuning
PR
Normally fine tuning is only necessary if reception is poor.
1. Repeat the ‘Manual programme tuning’ steps 1 to 2.
*
HOLD SIZE MIX TIME
2. Press the G button and then
3. Press the G button
button to select Fine.
D E
/
4. Press the F / G button to fine tune for the best picture and sound
on the Fine pull-down menu.
5. Press the OK button.
6. Repeatedly press the MENU button to return to normal TV
viewing.
MENU
The finely tuned programme will be indicated by orange num-
ber during programme selection.
Manual programme
PR
Storage
System
Band
OK
VOL
VOL
PR
Channel
Fine
G
F / G
Search
Name
DE FG OK MENU
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up TV stations
Station
Programme edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
Auto programme
Manual programme
Programme edit
Favourite programme
1. Press the MENU button and then
button to select the
D
E
/
Station menu.
DE FG OK MENU
2. Press the G button and then
button to select Programme
D E
/
edit.
1
2
3
6
3. Press the
G
button to display the Programme edit menu.
4
7
5
8
Programme edit
9
0
1
2
3
4
C
03
5
6
7
8
9
S
S
S
C
C
69
17
22
09
11
BLN 03
LIST
Q.VIEW
0
C
S
S
12
66
67
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
Delete
Move
Copy
Skip
M
E
N
U
I/II
DE F G OK MENU
PR
SLEEP
Deleting a programme
1. Select a programme to be deleted with the
2. Press the RED button twice.
*
or F / G button.
D E
/
HOLD SIZE MIX TIME
MENU
The selected programme is deleted, all the following
programmes are shifted up one position.
Programme edit
PR
0
1
2
3
4
C
03
5
6
7
8
9
S
S
S
C
C
69
17
22
09
11
OK
VOL
VOL
BLN 03
PR
C
S
S
12
66
67
1
4
7
2
5
8
0
3
6
9
Delete
MENU
Copying a programme
1. Select a programme to be copied with the
2. Press the GREEN button.
or F / G button.
D E
/
All the following programmes are shifted down one position.
Moving a programme
1. Select a programme to be moved with the
2. Press the YELLOW button.
or F / G button.
D E
/
3. Move the programme to the desired programme number with
the
or F / G button.
D E
/
4. Press the YELLOW button again to release this function.
Skipping a programme number
1. Select a programme number to be skipped with the
button.
or F / G
D E
/
2. Press the BLUE button. The skipped programme turns to blue.
3. Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the
button during normal TV
D
E
/
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Repeatedly press the MENU button to return to normal TV viewing.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up TV stations
Station
Favourite programme
This function lets you select your favourite programmes directly.
Auto programme
Manual programme
Programme edit
Favourite programme
1. Press the MENU button and then
button to select the
D
E
/
Station menu.
2. Press the G button and then
to select Favourite
D E
/
programme.
DE FG OK MENU
Station
Off
-- -----
Auto programme
Manual programme
Programme edit
7
8
9
-- -----
-- -----
-- -----
-- -----
-- -----
-- -----
-- -----
LIST
Q.VIEW
Favourite programme
G
0
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
DE FG OK MENU
3. Press the G button and then F / G button to select On or Off.
4. Press the button to select -- -----.
D E
/
PR
5. Select a desired programme with the F / G button.
6. To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
*
HOLD SIZE MIX TIME
7. Repeatedly press the MENU button to return to normal TV viewing.
LIST
MENU
Repeatedly press the YELLOW button to select stored favourite
programmes while it is selected On. Repeatedly press the YEL-
LOW button to select previous programmes while it is selected Off.
PR
OK
VOL
VOL
PR
Calling the programme table
You can check the programmes stored in the memory by displaying
the programme table.
Displaying programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Programme List
0
1
2
3
4
C
03
5
6
7
8
9
S
S
S
C
C
69
17
22
09
11
BLN 03
C
S
S
12
66
67
DE F G OK MENU
Note :
a. You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the
programme table indicate there is no station name assigned.
Selecting a programme in the programme table
Select a programme with the
Then press the OK button.
or F / G button.
D E
/
The set switches to the chosen programme number.
Paging through a programme table
There are 10 programme table pages in which contain 100
programmes.
Pressing the
or F / G button repeatedly turns the pages.
D E
/
Press the MENU button to return to normal TV viewing.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture adjustment
Picture
PSM
PSM (Picture Status Memory)
CSM
XD
Cinema
Reset
1. Press the MENU button and then
button to select the
D
E
/
Picture menu.
2. Press the G button and then
3. Press the Gbutton and then
button to select PSM.
D E
/
D E
button to select a picture set-
/
ting on the PSM menu.
DE FG OK MENU
4. Press the OK button.
Picture
7
8
9
Dynamic
Standard
Mild
PSM
G
CSM
LIST
Q.VIEW
0
XD
PSM
SSM
Game
Cinema
Reset
User
MUTE
VOL
TEXT
VOL
PR
OK
DE FG OK MENU
5. Repeatedly press the MENU button to return to normal TV
PR
viewing.
*
You can also recall a desired picture (Dynamic, Standard, Mild,
Game or User) with PSM button on the remote control. The picture
Dynamic, Standard, Mild and Game are programmed for optimum
picture reproduction at the factory and cannot be changed.
HOLD SIZE MIX TIME
PR
Picture adjustment
OK
VOL
VOL
You can adjust picture contrast, brightness, colour intensity,
sharpness, tint to the levels you prefer.
PR
1. Press the MENU button and then
button to select the
D
E
/
Picture menu.
2. Press the G button and then
3. Press the G button and then
4. Press the G button and then
button to select PSM.
button to select User.
button to select the desired
D E
/
D E
/
D E
/
PSM
picture item.
5. Press the G button and then F / G button to make appropriate
adjustments
.
User
Contrast
Brightness
Colour
100 G
50
50
Sharpness
Tint
50
0
Contrast
85 F
G
E
DE FG OK MENU
6. Repeatedly press the MENU button to return to normal TV
viewing.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture adjustment
Picture
PSM
CSM (Colour Status Memory)
CSM
XD
Selecting a factory setting colour set.
Cinema
Reset
1. Press the MENU button and then
button to select the
D
E
/
Picture menu.
2. Press the G button and then
button to select CSM.
D E
/
DE FG OK MENU
Picture
PSM
CSM
G
Cool
XD
Normal
Warm
User
LIST
MUTE
VOL
Q.VIEW
TEXT
VOL
0
Cinema
Reset
PSM
SSM
PR
OK
DE FG OK MENU
3. Press the G button and then
button to select a color set-
PR
D E
/
ting on the CSM menu: Cool, Normal, Warm or User (Red,
Green, Blue).
4. Press the OK button.
*
HOLD SIZE MIX TIME
5. Repeatedly press the MENU button to return to normal TV
viewing.
MENU
PR
OK
VOL
VOL
PR
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture adjustment
Picture
PSM
XD function
CSM
XD
Cinema
Reset
XD is LG electronic's unique picture improving technology to display a
real HD source through an advanced digital signal processing algorithm.
1. Press the MENU button and then
button to select the
D
E
/
Picture menu.
2. Press the G button and then
3. Press the G button and then
button to select XD.
D E
/
DE FG OK MENU
button to select Auto or
D
E
/
Manual.
7
8
9
Picture
LIST
Q.VIEW
0
PSM
CSM
PSM
SSM
XD
G
Auto
MUTE
VOL
TEXT
VOL
PR
OK
Cinema
Reset
Manual
PR
DE FG OK MENU
*
4. Press the OK button.
5. Repeatedly press the MENU button to return to normal TV
HOLD SIZE MIX TIME
viewing.
Selecting the Manual
This menu is activatived after selecting the User of PSM.
MENU
1. Press the
Contrast, XD Colour or XD NR.
2. Press the G button and then
button and then
button to select XD
G
D
E
/
PR
button to select On or Off.
D / E
OK
3. Repeatedly press the MENU button to return to normal TV
VOL
VOL
PR
viewing.
XD Contrast : Optimizing the contrast automatically according to the
brightness of the reflection.
XD Colour : Adjusting the colors of the reflection automatically to
reproduce as closely as possible to the natural colors.
XD NR : Removing the noise up to the point where it does not dam-
age the original picture.
Manual
XD Contrast
XD Colour
XD NR
G
On
Off
DE FG OK MENU
Note: It’s not available to use this function in RGB[PC], HDMI[PC]
mode. This feature is not available for all models.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture adjustment
Picture
PSM
Cinema
CSM
XD
Cinema
Reset
Set up the TV for the best picture appearance for viewing movies.
1. Press the MENU button and then
button to select the
D
E
/
Picture menu.
2. Press the G button and then
3. Press the G button and then
button to select Cinema.
button to select On or Off.
D E
/
D / E
DE FG OK MENU
Picture
PSM
7
8
9
CSM
LIST
Q.VIEW
0
XD
On
Off
Cinema
Reset
G
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
DE FG OK MENU
4. Repeatedly press the MENU button to return to normal TV
PR
viewing.
*
HOLD SIZE MIX TIME
Note: This feature is not available for all models.
Reset
Returns to the default settings PSM, CSM, XD, Cinema at the
MENU
factory.
1. Press the MENU button and then
button to select the
D
E
/
Picture menu.
PR
2. Press the G button and then
button to select Reset.
D E
/
OK
VOL
VOL
3. Press the
G
button to initialize the adjusted value.
PR
Picture
PSM
CSM
XD
Cinema
Reset
G
To set
DE FG OK MENU
4. Repeatedly press the MENU button to return to normal TV
viewing.
Note: This feature is not available for all models.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound adjustment
Sound
SSM (Sound Status Memory)
You can select your preferred sound setting; Flat, Music, Movie or
Sports and you can also adjust the sound frequency of the equalizer.
SSM
AVL
Balance
0
1. Press the MENU button and then
button to select the
D
E
/
Sound menu.
Sound
Flat
SSM
G
DE FG OK MENU
Music
Movie
Sports
User
AVL
Balance
0
7
8
9
LIST
Q.VIEW
0
PSM
SSM
DE FG OK MENU
MUTE
VOL
TEXT
VOL
PR
OK
2. Press the G button and then
3. Press the G button and then
setting on the SSM menu.
button to select SSM.
D E
/
D E
/
button to select a sound
PR
Sound Frequency Adjustment
a. Press the OK button in User.
*
b. Select a sound band by pressing the F / G button.
c. Make appropriate sound level with the
button.
D E
/
HOLD SIZE MIX TIME
d. Press the OK button to store it for the sound User.
User
MENU
0.1 0.5 1.2 5.0 10 kHz
DE FG OK MENU
PR
OK
VOL
VOL
PR
4. Repeatedly press the MENU button to return to normal TV viewing.
You can also recall a desired sound setting (Flat, Music, Movie, Sports
or User) with SSM button on the remote control. The sound settings
Flat, Music, Movie and Sports are programmed for optimum sound
reproduction at the factory and cannot be changed.
Note : If you press the SSM button after making appropriate
adjustment on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Sports.
SSM
Sound adjustment
You can adjust balance, AVL (Auto Volume Leveler). AVL automati-
cally keeps on an equal volume level even if you change programmes.
1. Press the MENU button and then
button to select the
D
E
/
Sound menu.
2. Press the G button and then
button to select the desired
D E
/
sound item; AVL or Balance.
Sound
SSM
AVL
G
On
Balance
0
Off
DE FG OK MENU
3. Make desired adjustment with the
, F / G and then press
D E
/
the OK button.
4. Repeatedly press the MENU button to return to normal TV viewing.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound adjustment
4
5
8
6
Stereo/Dual reception
7
9
When a programme is selected, the sound information for the
station appears after the programme number and station name
disappear.
LIST
Q.VIEW
0
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
Broadcast
Mono
On Screen Display
MONO
Stereo
Dual
STEREO
DUAL I
PR
*
HOLD SIZE MIX TIME
Mono sound selection
REVEAL INDEX MODE UPDATE
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II
button twice again.
?
M
i
Language selection for dual language broadcast
If a programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
I/II
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the
loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
NICAM reception
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1. When NICAM mono is received, you can select NICAM MONO
or FM MONO.
2. When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
3. When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO. When FM
mono is selected the display MONO appears on the screen.
Sound output selection
In AV mode, you can select output sound for the left and right loud-
speakers.
Repeatedly press the I/II button to select the sound output.
L+R : Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
speaker.
L+L : Audio signal from audio L input is sent to left and right loud-
speakers.
R+R : Audio signal from audio R input is sent to left and right loud-
speakers.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME Menu
Time
Clock
Clock
Off time
On time
Auto sleep
You must set the time correctly before using on/off time function.
1. Press the MENU button and then
button to select the
D / E
Time menu.
2. Press the G button and then
button to select Clock.
D / E
Time
DE FG OK MENU
Clock
G
- - : - -
Off time
On time
Auto sleep
7
8
9
LIST
Q.VIEW
0
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
DE FG OK MENU
3. Press the G button and then
4. Press the G button and then
button to adjust the hour.
button to adjust the minute.
D / E
D / E
PR
5. Press the MENU button to save.
*
On/Off time
HOLD SIZE MIX TIME
The off timer automatically switches the set to standby at the
preset time.
1. Press the MENU button and then
button to select the
D / E
Time menu.
2. Press the G button and then
MENU
button to select Off time or
D / E
On time
.
3. Press the G button and then
button to select On
.
D / E
PR
To cancel On/Off time function, press the
button to
D
/ E
OK
VOL
VOL
select Off
.
PR
Time
Clock
Off time
On time
Auto sleep
00 : 00
G
Pr.
0
Vol. 30
On
DE FG OK MENU
4. Press the G button and then
5. Press the G button and then
button to adjust the hour.
button to adjust the minute.
D / E
D / E
6. Only On time function; Press the G button and then
button to adjust volume level and programe number.
7. Press the MENU button to save.
D / E
Note :
a. In the event of power interruption (disconnection or power
failure), the clock must be reset.
b. Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
c. Once the on or off time is set, these functions operate daily at
the preset time.
d. Off Timer function overrides On Timer function if they are set to
the same time.
e. The set must be in standby mode for the On Timer to work.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME Menu
Time
Auto sleep
Clock
Off time
On time
Auto sleep
If you select On on the Auto sleep menu, the set will automatical-
ly switch itself to standby mode approximately ten minutes after a
TV station stops broadcasting.
1. Press the MENU button and then
button to select the
D / E
DE FG OK MENU
Time menu.
2. Press the G button and then
3. Press the G button and then
Time
button to select Auto sleep.
D / E
D / E
7
8
9
button to select On or Off.
LIST
Q.VIEW
0
PSM
SSM
Clock
Off time
On time
Auto sleep
MUTE
VOL
TEXT
VOL
PR
OK
G
On
Off
PR
DE FG OK MENU
*
4. Press the MENU button to save.
HOLD SIZE MIX TIME
Sleep timer
MENU
You don’t have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time has elapsed.
PR
OK
Press the SLEEP button to select the number of minutes.
VOL
VOL
The display ‘
---’ will appear on the screen, followed by 10, 20,
PR
30, 60, 90, 120, 180 and 240. The timer begins to count down from
the number of minutes selected.
Note :
a. To view the remaining sleep time, press the SLEEP button
once.
b. To cancel the sleep time, repeatedly press the SLEEP button
until the display ‘
---’ appears.
SLEEP
c. When you switch the set off, the set releases the preset sleep
time.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Other functions
Special
Child lock
Language
Country
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
ing.
Child lock
XD Demo
1. Press the MENU button and then
button to select the
D
E
/
DE FG OK MENU
Special menu.
2. Press the G button and then
3. Press the G button and then
button to select Child lock.
button to select On or Off
D E
/
D E
/
7
8
9
on the Child lock menu.
LIST
Q.VIEW
0
Special
PSM
SSM
Language
Country
MUTE
VOL
TEXT
VOL
PR
OK
Child lock
XD Demo
G
On
Off
PR
*
DE FG OK MENU
HOLD SIZE MIX TIME
4. Press the MENU button to save.
5. Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the top panel is pressed while viewing the TV.
MENU
PR
OK
VOL
VOL
PR
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Other functions
Special
XD Demo
Language
Country
Use it to see the difference between XD Demo on and XD Demo
off.
Child lock
XD Demo
1. Press the MENU button and then
button to select the
D
E
/
Special menu.
DE FG OK MENU
2. Press the Gbutton and then
button to select XD Demo.
D E
/
3. Press the G button to begin XD Demo.
Special
7
8
9
Language
Country
LIST
Q.VIEW
0
PSM
SSM
Child lock
XD Demo
G
To start
MUTE
VOL
TEXT
VOL
PR
OK
DE FG OK MENU
PR
4. Press the MENU button to return to normal TV viewing.
*
Note:
HOLD SIZE MIX TIME
a. It’s not available to use this function in RGB[PC], HDMI[PC]
mode.
b. This feature is not available for all models.
• XD Demo
MENU
™
XD Off
™
XD On
PR
OK
VOL
VOL
PR
Menu Exit
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Other functions
TV, AV and PC modes
POWER
TV
2
INPUT
Press the INPUT button and then
mode.
Inputs can be set for TV, AV or PC mode. AV mode is used when a
video cassette recorder (VCR), or other equipment is connected to
the set.
button to select desired
D
E
/
1
4
3
6
5
8
0
7
9
LIST
Q.VIEW
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the ‘Connection of external equipment’ sec-
tion.
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
15LS1R /15LC1R : TV, AV1, AV2, RGB (RGB [DTV], RGB [PC]).
*
*
20LS1R /20LC1R : TV, AV1, AV2.
PR
*
*
20LS2R / 23LS2R : TV, AV1, AV2, Component, RGB (RGB
*
*
[DTV], RGB [PC]), HDMI/DVI (HDMI/DVI
[DTV], HDMI/DVI [PC]).
<15LS1R / 20LS1R >
*
*
<20LS2R / 23LS2R >
Input
<15LC1R / 20LC1R >
*
*
*
*
Input
INPUT
TV
TV
AV1
AV2
RGB*
AV1
AV2
Component
RGB
PR
HDMI/DVI
OK
VOL
VOL
DE OK
DE OK
PR
* : 15LS1R/15LC1R
1
4
7
2
5
8
0
3
6
9
The AV and PC modes are :
• AV 1 : VCR connected to the Euro scart socket of the set.
• AV 2 : VCR connected to the AV IN 2 or S-Video of the set.
• RGB-DTV : SET TOP connected to the PC INPUT and PC
SOUND socket.
• RGB-PC : PERSONAL COMPUTER connected to the PC
socket.
•
•
•
Component : DVD connected to the COMPONENT sockets on
the back of set.
HDMI-DTV : DVD connected to the HDMI sockets on the back
of set.
HDMI-PC : PERSONAL COMPUTER connected to the HDMI
sockets on the back of set.
Auto AV switching
If your VCR outputs an AV switching voltage when connected to the
Euro scart socket, the set will switch to AV1 mode automatically. But
if you want to keep on watching TV mode, press the
BER buttons.
or NUM-
D E
/
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
1
2
3
6
- This feature is not available in all countries.
4
7
5
8
9
Teletext (or TOP text) is an optional function, therefore only a set with
the teletext system can receive the teletext broadcast.
Teletext is a free service broadcast by most TV stations which gives up-
to-the-minute information on news, weather, television programmes,
share prices and many other topics.
LIST
Q.VIEW
0
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
The teletext decoder of this TV can support the SIMPLE, TOP and FAS-
TEXT systems. SIMPLE (standard teletext) consists of a number of
pages which are selected by directly entering the corresponding page
number. TOP and FASTEXT are more modern methods allowing quick
and easy selection of teletext information.
MENU
I/II
PR
SLEEP
*
HOLD SIZE MIX TIME
REVEAL INDEX MODE UPDATE
?
M
i
Switch on/off
PR
OK
Press the TEXT button to switch to teletext. The initial page or last page
appears on the screen.
PR
Two page numbers, TV station name, date and time are displayed on
the screen headline. The first page number indicates your selection,
while the second shows the current page displayed. Press the TEXT
button to switch off teletext. The previous mode reappears.
1
4
7
2
5
8
0
3
6
9
SIMPLE text
TEXT
TIME
MIX
Page selection
UPDATE
SIZE
1. Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number,
you must complete the three digit number and then re-enter the cor-
rect page number.
HOLD
REVEAL
?
INDEX
i
MODE
M
2. The
button can be used to select the preceding or following
D E
/
page.
Programming a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
button to switch to LIST mode.
M
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on the
remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to pro-
gramme.
3. Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
select this page with the same coloured button.
4. The three other coloured buttons are programmed in this way.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
TOP text
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing page with automatic overflow to the next
group. Alternatively the button can be used.
D
4. The red button permits to return to previous selection. Alternatively the button can be used.
E
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit num-
ber using the NUMBER buttons in TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
Page selection
1. Press the i button to select the index page.
2. You can select the pages which are colour coded along the bottom line with the same coloured but-
tons.
3. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page
number with the NUMBER buttons in FASTEXT mode.
4. The
button can be used to select the preceding or following page.
D E
/
Special teletext functions
REVEAL
?
Press this button to display concealed information, such as solutions of riddles or puzzles.
Press this button again to remove the information from the display.
SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
UPDATE
Displays the TV picture on the screen while waiting for the new teletext page.
The display
will appear at the top left hand corner of the screen. When the updated page
is available then display
will change to the page number.
Press this button to view the updated teletext page.
HOLD
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub
pages.
The number of sub pages and the sub page displayed is, usually, shown on the screen below
the time. When this button is pressed the stop symbol is displayed at the top left-hand corner
of the screen and the automatic page change is inhibited.
To continue press this button again.
MIX
Displays the teletext pages superimposed on the TV picture.
To switch the TV picture off press this button again.
TIME
When viewing a TV programme, press this button to display the time at the top right hand cor-
ner of the screen. Press this button again to remove the display. In the teletext mode, press this
button to select a sub page number. The sub page number is displayed at the top left hand cor-
ner of the screen. To hold or change the sub page, press the NUMBER buttons.
Press again to exit this function.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection of external equipment
You can connect additional equipment, such as VCRs, camcorders
etc. to your set. Examples are shown below.
Note: Here shown may be somewhat different from your set.
Aerial socket
ANTENNA IN
1. Connect the RF out socket of the VCR to the aerial socket of
the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the ‘Manual programme tuning’ section.
4. Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.
VCR
Euro scart socket (VCR)
1. Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs an AV switching signal via the Scart lead the
set will auto switch to AV 1 mode on start of playback, but if you
A
want to keep on watching in TV mode, press the
BER buttons.
or NUM-
D E
/
AV
1
O
Otherwise press the INPUT button on the remote control
handset to select AV1. The VCR play back picture appears on
the screen.
You can also record programmes received by the TV on video
tape.
VCR
Note :
a. Signal type RGB, i.e. the signals red, green and blue can only
be selected for the Euro scart and the AV1 can be received.
These signals are transmitted, for example, by a pay TV
decoder, game machine or photo CD unit, etc.
b. Please use shielded scart cable.
Audio/Video in sockets
1. Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2. Press the INPUT button to select AV 2.
3. Press the PLAY button on the VCR.
VIDEO
AV IN
2
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VCR
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection of external equipment
S-Video/Audio in sockets (S-Video)
When connecting an S-VIDEO VCR to the S-VIDEO socket, the
picture quality will be further improved.
VIDEO
S-VIDEO
AV IN
2
1. Connect the S-Video socket of the VCR to the S-VIDEO socket
of the set.
2. Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
S-VIDEO VCR
3. Press the INPUT button to select AV 2.
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
DVD input sockets
AV
1
Euro scart socket
1. Connect the Euro scart socket of the DVD to the Euro scart
socket of the set.
2. Press the INPUT button to select AV1.
3. Press the PLAY button on the DVD.
The DVD playback picture appears on the screen.
DVD
Component sockets (20LS2R / 23LS2R )
*
*
1. Connect the video output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-
Y or Y PB PR) of the DVD to the COMPONENT sockets (Y PB
PR) of the set.
2. Connect the audio cable from the DVD to COMPONENT/
AUDIO sockets of the set.
Y
PB
PR
L
R
VIDEO
AUDIO
COMPONENT IN
3. Press the INPUT button to select Component
(480i/576i/480p/576p/720p/1080i).
4. Press the PLAY button on the DVD.
The DVD playback picture appears on the screen.
DVD
HDMI sockets (20LS2R / 23LS2R )
*
*
1. Connect the HDMI output of the DVD to the HDMI/DVI IN jack
on the set.
2. Select HDMI/DVI (480p/576p/720p/1080i) input source with
using the INPUT button on the remote control.
HDMI/DVI IN
DVD
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection of external equipment
DTV in sockets
RGB(PC/DTV) IN
AUDIO
(RGB) IN
RGB in socket (15LS1R /15LC1R / 20LS2R / 23LS2R )
*
*
*
*
1. Connect the SET TOP with the D-Sub output socket to RGB
(PC/DTV) IN socket on the set and audio cable of the SET TOP
to the AUDIO (RGB) IN (15LS1R /15LC1R ) or AUDIO
*
*
(RGB/DVI) IN (20LS2R / 23LS2R ).
*
*
2. Press the INPUT button to select RGB (or RGB [DTV])
DTV Reciever
(576p/480p) - 15LS1R /15LC1R , (480p/576p/720p/1080i) -
*
*
20LS2R / 23LS2R .
*
*
Component sockets (20LS2R / 23LS2R )
*
*
1. Connect the SET TOP outputs to the COMPONENT (DVD/DTV)
sockets (Y PB PR) on the set.
2. Connect the audio cable from the SET TOP to COMPONENT/
AUDIO sockets of the set.
Y
PB
PR
L
R
VIDEO
AUDIO
COMPONENT IN
3. Press the INPUT button to select Component
(480i/576i/480p/576p/720p/1080i).
HDMI sockets (20LS2R / 23LS2R )
DTV Reciever
*
*
1. Connect the HDMI output of the digital set-top box to the
HDMI/DVI IN jack on the set.
2. Select HDMI/DVI (480p/576p/720p/1080i) input source with
using the INPUT button on the remote control.
HDMI/DVI IN
Headphone socket
Insert the headphone plug to the headphone socket of the set. You
can listen to the sound through the headphone. To adjust the head-
phone volume, press the F / G button. If you press the MUTE but-
ton, the sound from the headphone is switched off.
DTV Reciever
H/P
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection of PC
PC in socket
RGB(PC/DTV) IN
AUDIO
(RGB) IN
RGB in socket (15LS1R /15LC1R / 20LS2R / 23LS2R )
*
*
*
*
1. Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
2. Connect the audio cable from the PC to the AUDIO (RGB) IN
(15LS1R /15LC1R ) or AUDIO (RGB/DVI) IN (20LS2R /
*
*
*
23LS2R ) sockets of the set.
*
3. Press the INPUT button to select RGB (or RGB [PC]).
4. Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
PERSONAL COMPUTER
HDMI/DVI IN
AUDIO
(RGB) IN
HDMI sockets (20LS2R*/ 23LS2R*)
1. Connect the DVI output of the PC to the HDMI/DVI IN jack on
the set.
2. Connect the audio cable from the PC to the AUDIO (RGB/DVI)
IN (20LS2R*/ 23LS2R*) sockets of the set.
3. Select HDMI/DVI [PC] input source with using the INPUT button
on the remote control.
PERSONAL COMPUTER
Displayable Monitor Specification
<15LS1R /15LC1R >
<20LS2R , 23LS2R >
*
*
*
*
Horizontal
Vertical
Horizontal
Vertical
MODE Resolution
MODE Resolution
Frequency(kHz) Frequency(Hz)
Frequency(kHz) Frequency(Hz)
VGA
SVGA
XGA
640x480
31.4
60
VGA
SVGA
XGA
640x480
800x600
31.4
37.8
60
60
800x600
800x600
35.1
37.8
56
60
1024x768
1280x768
48.3
47.7
60
60
1024x768
48.3
60
WXGA 1360x768
47.7
60
(Synchronization input form : separate)
Note :
a. If the set is cold, there may be a small “flicker” when the set is switched on. This is normal, there is
nothing wrong with the set.
b. If possible, use the VESA 1024x768@60Hz (15LS1R //15LC1R ), 1360x768@60Hz (20LS2R /
*
*
*
23LS2R ) video mode to obtain the best image quality for your LCD monitor. If used under the other
*
resolutions, some scaled or processed pictures may appear on the screen. The set has been pre-
adjusted to the mode VESA 1024x768@60Hz (15LS1R //15LC1R ), 1360x768@60Hz (20LS2R /
*
*
*
23LS2R ).
*
c. Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have
no impact or effect on the monitor performance.
d. Do not press the LCD screen with your finger for a long time as this may produce some temporary
distortion effects on the screen.
e. When the PC screen appears on the set, a message may appear on the screen, and the message
will differ according to the Window system version. If a message appears click “Next” until the
message finishes.
f. If the message “No signal” appears on the screen, adjust the PC as in the ‘Displayable Monitor
Specification’ section.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection of PC
Screen
PC Setup
Auto config.
Manual config.
XGA Mode
ARC
You can adjust auto configure, manual configure and reset as you
prefer.
Reset
1. Press the INPUT button and then
RGB [PC].
button to select the
button to select the
D
D
E
E
/
/
2. Press the MENU button and then
Screen menu.
DE FG OK MENU
POWER
3. Press the G button and then
button to select the desired
D E
TV
2
INPUT
/
screen function.
1
4
3
6
Screen
Auto config.
Manual config.
XGA Mode
ARC
G
5
8
0
To set
7
9
LIST
Q.VIEW
Reset
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
DE FG OK MENU
4. Make appropriate adjustments.
PR
Auto configure
This function is for the automatic adjustment of the screen posi-
tion, clock and phase. The displayed image will disappear for a
few seconds while the Auto-configuration is in progress.
Manual configure
INPUT
This function is for the manual adjustment of the screen posi-
tion, clock and phase. Press the F / G button to make appro-
priate adjustments.
MENU
• H-Position / V-Position
This function is to adjust picture to left/right and up/down as you
prefer.
PR
OK
VOL
VOL
PR
• Clock
This function is to minimize any vertical bars or stripes visible on
the screen background. And the horizontal screen size will also
change.
• Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Reset
This function allows you to return to the good picture reproduc-
tion programmed at the factory and cannot be changed.
Note : Some signal from some graphics boards may not func-
tion properly. If the results are unsatisfactory, adjust your moni-
tor’s position, clock and phase manually.
5. Press the OK button to store it for the PC monitor picture.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection of PC
Screen
Selecting wide XGA mode
Auto config.
Manual config.
XGA Mode
ARC
To see a normal picture, match the resolution of RGB mode and
selection of XGA mode.
Reset
1. Press the MENU button and then
button to select the
D
E
/
DE FG OK MENU
Screen menu.
2. Press the G button and then
3. Press the G button and then
XGA resolution.
button to select XGA mode.
button to select the desired
D / E
D / E
7
8
9
LIST
Q.VIEW
0
Screen
PSM
SSM
Auto config.
Manual config.
XGA Mode
ARC
MUTE
VOL
TEXT
VOL
PR
OK
G
1024x768
1280x768
1360x768
Reset
PR
DE FG OK MENU
*
4. Repeatedly press the MENU button to return to normal TV
HOLD SIZE MIX TIME
viewing.
Note: This feature is not available for all models.
MENU
PR
OK
VOL
VOL
PR
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture format
4
5
8
6
You can watch TV in various picture formats; Spectacle, Original,
4:3, 16:9, 14:9, Zoom1, Zoom2.
Repeatedly press the ARC button to select your desired picture
format.
7
9
LIST
Q.VIEW
0
PSM
SSM
MUTE
VOL
TEXT
VOL
PR
OK
Spectacle
When your TV receives the wide screen signal, it will lead you to
adjust the picture horizontally, in a nonlinear proportion, to fill the
entire screen.
PR
Original
HOLD SIZE MIX TIME
REVEAL INDEX MODE UPDATE
When your TV receives the wide screen signal, it will be automatically
changed to the picture format to be sent. (Not available in all countries)
?
M
i
4:3
This picture format is 4 to 3 of general TV.
PR
PR
16:9
You can enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is
magnified to the left and right so that the screen 16:9 is full.
14:9
You can enjoy the picture format of 14:9 or general TV programme
through the 14:9 mode.
The screen 14:9 is viewed just like that the screen 4:3 is magnified
to the upper / lower and left / right.
ARC
Zoom1
Following selection will lead you to view the picture without any alterna-
tion, while filling the entire screen. However, the top and bottom portions
of the picture will be cropped.
Zoom2
Choose Zoom2 when you want the picture to be altered, both hor-
izontally extended and vertically cropped. The picture taking a
halfway trade off between alteration and screen coverage.
Note :
a. ARC menu is not available in RGB, HDMI, Component mode
exept 4:3, 16:9. You cn adjust the enlarge proportion using
button.
b. This feature is not available for all models.
D / E
/
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Checklist
The operation does not work normally.
• Check to see if there is any object between the product and the remote
control causing obstruction.
The remote control
• Are batteries installed with correct polarity (+ to +, - to -)?
• Correct remote operating mode set: TV, VCR etc.?
• Install new batteries.
doesn’t work
• Is the sleep timer set?
• Check the power control settings. Power interrupted
• No broadcast on station tuned with Auto off activated.
Power is suddenly
turned off
The video function does not work.
• Check whether the product is turned on.
• Try another channel. The problem may be with the broadcast.
• Is the power cord inserted into wall power outlet?
• Check your antenna direction and/or location.
No picture &
No sound
• Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
• This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after five
minutes.
Picture appears
slowly after
switching on
• Adjust Color in menu option.
• Keep a sufficient distance between the product and the VCR.
• Try another channel. The problem may be with the broadcast.
• Are the video cables installed properly?
No or poor color
or poor picture
• Activate any function to restore the brightness of the picture.
Horizontal/verti-
cal bars or pic-
ture shaking
• Check for local interference such as an electrical appliance or power tool.
• Station or cable product experiencing problems, tune to another station.
• Station signal is weak, reorient antenna to receive weaker station.
• Check for sources of possible interference.
Poor reception on
some channels
Lines or streaks
in pictures
• Check antenna (Change the direction of the antenna).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Checklist
The audio function does not work.
• Press the VOL (or Volume) button.
• Sound muted? Press MUTE button.
• Try another channel. The problem may be with the broadcast.
Picture OK &
No sound
• Are the audio cables installed properly?
No output from one
of the speakers
• Adjust Balance in menu option.
Unusual sound
from inside the
product
• A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault with
the product.
There is a problem in PC mode.
(Only PC mode applied)
• Adjust resolution, horizontal frequency, or vertical frequency.
• Check the input source.
The signal is out of
range.
Vertical bar or
stripe on back-
ground &
• Work the Auto configure or adjust clock, phase, or H/V position.
Horizontal Noise &
Incorrect position
• Check the signal cable.
• Reinstall the PC video card.
Screen color is
unstable or single
color
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Specifications
Power Requirement/
Power Consumption
15LS1R : AC100-240V~ 50/60Hz 0.7A / 40W
*
20LS1R : AC100-240V~ 50/60Hz 1.0A / 60W
*
20LS2R : AC100-240V~ 50/60Hz 1.0A / 60W
*
23LS2R : AC100-240V~ 50/60Hz 0.9A / 85W
*
Dimensions
(Width x Depth x Height)
15LS1R : 463.3mm x 166.3mm x 353.5mm
*
18.2inches x 6.5inches x 13.9inches
20LS1R : 573.2mm x 189.7mm x 435.5mm
*
22.6inches x 7.5inches x 17.1inches
20LS2R : 518.9mm x 177.7mm x 415.5mm
*
20.4inches x 7.0inches x 16.4inches
23LS2R : 589.2mm x 189.7mm x 464.9mm
*
24.0inches x 7.5inches x 18.3inches
Weight (Net)
15LS1R : 3.9kg (8.7lbs)
*
20LS1R : 6.9kg (15.3lbs)
*
20LS2R : 6.2kg (13.6lbs)
*
23LS2R : 7.9kg (17.4lbs)
*
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’
Television System
Programme Coverage
VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
75 Ω
External Antenna Impedance
* The specifications shown above may be changed without prior notice for quality
improvement.
Power Requirement/
Power Consumption
15LC1R : AC100-240V~ 50/60Hz 0.7A / 40W
*
20LC1R : AC100-240V~ 50/60Hz 1.0A / 60W
*
15LC1R : 377.6mm x 242.8mm x 394.5mm
Dimensions
(Width x Depth x Height)
*
14.9inches x 9.6inches x 15.5inches
20LC1R : 492.4mm x 272.8mm x 483.3mm
*
19.4inches x 10.7inches x 19.0inches
15LC1R : 5.6kg (12.3lbs)
Weight (Net)
*
20LC1R : 9.1kg (20.1lbs)
*
Television System
Programme Coverage
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’
VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
75 Ω
* The specifications shown above may be changed without prior notice for quality improvement.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|